RH170B. Hydraulic Mining Excavator RH170B HYDRAULIC MINING EXCAVATOR. General Data: Features. Product Specification Sheet.

Transcription

1 RH0B Hydraulic Mining Excavator,0 ( General Data:,00 4 ( ),000 ( 0,80 ( ) (,0 (8,0 (8,00 ( Features 80 (,00 (,0 0,00 ( 8,80 ( RH0B HYDRAULIC MINING EXCAVATOR Operating Weight TriPower shovel attachment Face Shovel t 48 sht Backhoe t 48 sht Engine Output SAE J Caterpillar C, kw,0 HP Cuins KTA 8C,4 kw,000 HP Standard Bucket Capacity Face Shovel (SAE :).0 m 8.8 yd Backhoe (SAE :).0 m 8.8 yd Independent oil cooling system Spacious walk-through machine house -circuit hydraulic system Electronic-hydraulic servo control Board Control System (BCS) Torque control in closed-loop swing circuit Automatic central lubrication system Xenon working lights Product Specification Sheet

2 Operating Weight Shovel Standard track pads Operating weight Ground Pressure Further track pads on request Backhoe Standard track pads Operating weight Ground Pressure Further track pads on request Diesel Engines Engine Features Fuel Tank Capacity,00 (,400 kg (8, lb).8 N/cm (4.4 psi),00 (,000 kg (8,0 lb).8 N/cm (4.4 psi) Electrical System (diesel drive) System voltage Batteries in series / parallel installation Working spot lights,800 l (,00 US gal) Hydraulically driven radiator fan with electronically controlled fan speed Microprocessed engine management Automatic rev. reduction Heavy-duty air filters Two-stage fuel filter incl. water separator Additional high-capacity water separator Pre-lube starting system (Cuins engines only) 4V x 44 Ah - V each Ah - 4 V in total 8 x high brightness Xenon lights Battery isolation relays Emergency stop switches accessible from ground level, in engine module and in operator s cab Hydraulic Oil Cooling Oil flow of cooling pumps Diesel Version Electric Version x l/min ( x US gal/m 4 x l/min (4 x 0 US gal/m Diameter of fans x,4 ( x 0 ) Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running Gear type cooling pumps supplying high-volume, low-pressure oil to fans and aluminium coolers Variable axial piston pumps supplying low-volume, high-pressure oil to fans Fan speed is thermostatically controlled Extremely high cooling efficiency to ensure optimum oil temperature Electric Motor (optional) Type Output Voltage Rated Current I N Frequency Revolutions Starting current Squirrel cage induction motor,400 kw. kv +/- % (other on request) 4 A 0 Hz (0 Hz optional),00 min - (,800 min - optional) 40% of I N Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions Power limit control by Pump Management System Diesel Engines Version - Caterpillar Make and model x Caterpillar C Total rated net power ISO 04/, kw (,0 HP),0 min - Total rated net power SAE J4, kw (,0 HP),0 min - Total rated gross power SAE J, kw (,0 HP),0 min - No. of cylinders (each engine) Bore Stroke 4 (. (.8 Displacement. I (, in ) Aspiration Max. altitude without deration Turbocharged and air-to-air aercooled,8 m (,000 ) a.s.l. Emission certification US EPA Tier Alternators Version - Cuins x 0 A Make and model x Cuins KTA 8 C-00 Total rated net power ISO 04/,4 kw (,000 HP),800 min - Total rated net power SAE J4,4 kw (,000 HP),800 min - Total rated gross power SAE J,4 kw (,000 HP),800 min - No. of cylinders (each engine) Bore Stroke (. (. Displacement.8 I (,00 in ) Aspiration Max. altitude without deration Emission certification Alternators Undercarriage Travel speed ( stages) Max. tractive force st stage nd stage Turbocharged and aercooled,00 m,800 ) a.s.l. not available x A Max.. km/h (0. mph) Max.. km/h (. mph),000 kn 4 t = 44,40 lb) Gradability of travel drives Max. % Track pads (each side) 4 Bottom rollers (each side) Support rollers (each side) Travel drives (each side) Parking brake plus a skid plate in between planetary transmission with two-stage axial piston motors Wet multiple disc brake, spring applied / hydraulically released Cast double-grouser combined pad-links with bushings connected by hardened full floating pins All running surfaces of sprockets, idlers, rollers and pad links as well as teeth contact areas of sprocket and pad links are hardened Fully hydraulic self-adjusting track tensioning system with membrane accumulator Automatic hydraulic retarder valve to prevent over-speed on downhill travel Acoustic travel alarm

3 Hydraulic System with PMS Main Pumps Max. oil flow Operator s Cab Operator s eye level Max. pressure, attachment Max. pressure, travel Swing pumps Max. oil flow Max. pressure, swing circuit Total volume of hydraulic oil Hydraulic tank capacity Internal dimensions of cab 4 x variable swash plate pumps 4 x variable flow axial piston pumps 4 x 4 I/min (4 x US gal/m 4 x 4 I/min (4 x 44 US gal/m MPa = 0 bar (4,40 psi) MPa = 0 bar (,0 psi) 4 x reversible swash plate pumps x reversible swash plate pumps 4 x I/min (4 x 8 US gal/m x 48 I/min ( x US gal/m MPa = 0 bar (,080 psi) Approx.,400 I (,40 US gal) Approx.,000 I (,80 US gal) Approx.,000 I (0 US gal) Approx.,00 I (0 US gal) Pump Managing System (PMS) contains: Electronic load limit control Flow on demand from main pumps depending on joystick position Automatic regulation of main pumps to zero flow without demand Automatic rpm reduction of engine speed during working breaks Reduced oil flow of main pumps at high hydraulic oil temperature or at high engine temperature Pressure cut-off for main pumps Cooling of pump transmission gear oil Filters: Full-flow high-pressure filters (0 µm) for the main pumps, installed directly behind each pump Full-flow filters ( µm) for the complete return circuit Full-flow filters ( µm) for the cooling return circuit Pressure filters ( µm) for servo circuit Pressure filters (40 μm) for the feed pumps of the closed swing circuit Transmission oil filters (40 µm) approx.. m ( (,00 (,0 ( Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head and arm rests Switch in seat cushion to neutralize automatically the hydraulic controls when operator leaves the seat Joystick controls integrated in independently adjustable seat consoles Fold-away auxiliary seat with safety belt FOPS (rock guard; approved acc. to DIN ISO 44) integrated into cab structure All-round safety glass, armo red windshield and sliding side window Windshield with parallel intermittent wiper / washer Roller blind at windshield Robust instrument panel incl. large colored BCS screen with transflective technology Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic and lubrication system Machine access via retractable boarding ladder, hydraulically operated Emergency exit harness kit Attachments Booms and sticks are torsion-resistant, welded box design of hightensile steel with massive steel castings at pivot areas Welding procedures allow for internal counter-welding (double prep weld) wherever possible Boom and sticks are stress-relieved aer welding Inspection hole in monoboom of BH-attachment Catwalks with rails at boom (FS and BH) Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve Shovel attachment with patented TriPower kinematics ensuring the following main features: Horizontal automatic constant-angle bucket guidance Vertical automatic constant-angle bucket guidance Automatic roll-back limiter to prevent material spillage Kinematic assistance to hydraulic forces Constant boom momentum throughout the whole li arc Crowd force assistance All buckets (FS and BH) are equipped with a universal wear package suitable for all standard applications, which consists of: Special liner material covering main wear areas inside and outside of bucket Lip shrouds between teeth Wing shrouds on side walls Heel shrouds at bottom edges Special wear packages for highly abrasive materials on request Swing System Swing Drives Parking Brake Max. swing speed Swing ring compact planetary transmissions with axial piston motors Wet multiple disc brake, spring loaded / hydraulically released Diesel Version Electric Version 4. rpm. rpm Triple-race roller bearing with sealed internal gearing Closed-loop swing circuit with torque control Hydraulic braking of the swing motion by counteracting control All race ways of swing ring as well as grease bath for internal gearing supplied by automatic central lubrication system Automatic Lubrication System Capacity of grease container,000 l (4 US gal) Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause / lube times Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders System failures displayed by Board Control System Grease filters 0 μm) between service station and container as well as directly behind grease pump Retractable Service Station Retractable service station installed underneath the engine module and easily accessible from ground. Equipped with: Quick couplings for Diesel fuel Engine coolant - le / right Pump transmission gear oil - le / right Engine oil (oil pan) - le / right Engine oil (additional tank - optional) - le / right Hydraulic oil tank Grease container CAT jump start socket Indicator lights for fuel tanks le/right full and grease container full

4 TriPower Face Shovel Attachment (FS) Working Diagram - Boom. m ( - Stick 4. m ( m sht m Working Range Max. digging height 4.4 m 4 in Max. digging reach.4 m 0 in Max. digging depth. m 8 in Max. dumping height. m in Crowd distance on level. m in Digging Forces Max. crowd force,8 kn 40,0 lb Max. crowd force at ground level,80 kn 8,0 lb Max. breakout force,0 kn 8,4 lb Face Shovels Type Iron ore shovel Heavy rock shovel Heavy rock shovel Standard rock shovel Tooth system ESCO Posilok S ESCO Posilok S ESCO Posilok S ESCO Posilok S Capacity SAE / PCSA :. m (.4 yd ) 0. m (. yd ). m (0. yd ). m (. yd ) Capacity SAE / CECE :.0 m³ (. yd³) 8.0 m³ (. yd³) 0.0 m³ (. yd³).0 m³ (8.8 yd ) Total width 4,0 ( 4 4,0 ( 4 4,80 ( 4 4,80 ( 4 Inner width,840 (,840 ( 4,00 4,00 Opening width,40 ( 4,40 ( 4,0 (,0 ( No. of teeth Weight incl. universal wear kit,00 kg (4,00 lb) 4,00 kg (,0 lb),00 kg (80,00 lb),00 kg (8,0 lb) Max. material density (loose).8 t/m (4,0 lb/yd ). t/m (, lb/yd ).0 t/m (,0 lb/yd ).8 t/m (,00 lb/yd )

5 Backhoe Attachment (BH) Working Diagram - Boom. m ( - Stick 4. m ( m sht m Working Range Max. digging depth.0 m 0 in Max. digging reach. m 8 in Max. digging height.8 m in Digging Forces Max. crowd force,00 kn 40,40 lb Max. breakout force,0 kn,00 lb Backhoes Type Heavy rock bucket Heavy rock bucket Standard rock bucket Tooth system ESCO Posilok S ESCO Posilok S ESCO Posilok S Capacity SAE : 8.0 m (. yd ) 0.0 m (. yd ).0 m (8.8 yd ) Capacity CECE :. m (. yd ). m (. yd ). m (. yd ) Capacity struck 4.0 m (8. yd ). m.0 yd ). m (. yd ) Total width 4,0 ( 4,0 ( 4,0 ( Inner width,800 (,800 (,800 ( No. of teeth Weight incl. universal wear kit Max. material density (loose),000 kg (4,00 lb). t/m (, lb/yd ),00 kg (4,80 lb).0 t/m (,0 lb/yd ),800 kg (,40 lb).8 t/m (,00 lb/yd )

6 General Packing List Crawler side frame with track pads ( units) Undercarriage center frame with swing roller bearing,800 (,800 ( ( ( ( ( (( ( ( Gross weight,00 kg (4,40 lb),40,40,40,40,40,40,40,40 Superstructure center frame Engine module with diesel engines,,0 Gross weight C,000 kg (,0 lb),00 (,00,00 ( (,00 (,00,00 ((,00,00 ( (,00,00,00,00,00,00,00,00 Gross weight KTA8,000 kg (,0 lb),80,80 (,80,80 (( (,80 (,80 ( (,80,80 ( Gross weight 0,00 kg,0 lb),80 ( 8,80,80 ( ( 8,80 ( 88,80 8,80 (( 8,80,80 ( ( 8 8 Oil cooler module Gross weight,800 kg (,0 lb),000 ( Gross weight,000 kg (,40 lb),0,0 (,0,0 (( (,0 (,0 ( (,0,0 ( Crate with cabin and FOPS Counterweight incl. radiators Gross weight,00 kg (,0 lb),00 (4 Gross weight 8,00 kg (8,0 lb) Crates,00,00 (,00,00 (( (,00 (,00 ( (,00,00 (,00,00 (,00,00 (( (,00 (,00 ( (,00,00 (, (8,00,00,00,00,00,00,00,00,0 0,0,0 0,0 00,0 0,0 0,0,0 0 0 Content Gross Weight Three swing gear,00 (4,0 (4,0 ( 4,80 kg (8,440 lb) Swing ring cover (,00 (4,000 ( 40 kg (0 lb) Swing ring bolts, ladder, etc.,000 (,0 (4,80 (4,00 kg (,0 lb) Grease container with pump,00 (,00 (4,00 (,40 kg (,40 lb) Barrels (hydraulic oil),00 (8,00 (4,0 (4,00 kg (, lb) Barrels (engine oil; antifreeze),00 (8,00 (4,0 (4,00 kg (, lb) Above values are approximate. Details may vary depending on scope of supply and destination. Exact data subject to selected machine configuration and final packing list.,00 (,0,0 (,0,0 (( (,0 (,0 ( (,0,0 ( Cab pedestal module,0,0 (,0,0 (( (,0 (,0 ((,0,0 ( ( ( (( ( (( ( Gross weight,00 kg,40 lb)

7 TriPower Shovel Attachment Gross weight,00 kg,0 lb),0 (,0 (,0 (,0 ( 0 ( 0 0 ( ( 4,00 ( 4,00 (,4 ( ),4 ( ),4 ( ),4 ( ),4 ( ),4,4 ( ) ( ),00 (8,00 (,4 ( ) Gross weight,000 kg (0, lb),00 (,00 (,00 ((,00,00 (,80 ( 4 4,00 ( (,00 (8,00 (,80 ( ( ( 0 0 ( ( Stick with linkage bucket cylinders 4,004,00 ( ( and 4,00 (,80 ( 4,00 (,0 ( (,0 (,0,0 (,80 ( 4,80 ( 4,80 ( 4,00 (,00 (,00 (,00,00 ( (,00 (,0 (,0 ( 0 ( and bucket cylinders, each: Gross weight 4,00 kg (,480 lb) 4,00 ( Gross weight 4,00 kg (,40 lb),0 (,0 (,00 kg (4,0 lb) 0 ( 0 ( 0 0 ( ( 0 0 ( ( 4,04,0 Monoboom without main valve block 4,0 4,0,00 kg (,0 lb) ( 4,00 ( 0 4,00 4,00 ( (,80 ( 4,80 ( 4,80 (,80 4 ( 4,80 ( 4 Backhoe Attachment 4,0 ( Bundles with stick cylinders 4,00 ( 4,00 ( 0 ( 4,0 0 ( 0 ( 0 ( m³= m³ 4,0 ( ( m³ = 4,0 =m³ 4,0 ( ( 0 ( = 4,0 m³= m³ 4,000 ( ( m³ = 4,000 = 4,000 ( m³ = 4,000 0 ( 4,0 ( 0 ( 4,0 0 ( 4,0 4,0 4,0 Gross weight,0 (,00 (8,00 (8,00 (8 m³ = 4,0 ( 4,0 Bundle with boom m³ = 4,000 ( cylinders 4,0 0 (,0 (,0,0 ( (,0,0 ( (,80 ( 4 m³ = 4,000 m³ =4,000 ( (,80 (,00 ( m³ = 4,0 ( m³ = 4,000 ( = m³ 4,0 ( m³ = 4,000 (,00 (,0 (,000 (,00 (,00 (,00,00 ( (,00 (,00 (8,00 (8 8,08,0 ( ( 8,0 8,0 ( ( m³ = 4,0 ( ( ( m³ = 4,0 m³ m³= =4,000 4,0 ( m³==4,000 4,0 ( ( m³ =4,0 ( ( m³ =4,000 m³ 4,0 ) 4,00 kg (,80 lb) 8,00 kg (84,440 lb) 8,0 ( ( 4,0,0 ( 4,00 (.0 m (. yd) m³ =,400 m³ =,400 m³ =,0 ( m³ =,0 (= m³,400.0 m (8.8 yd ),0 (,0 Crates with,0 catwalks, railings other parts ( and,0 ( ( 8,0 ( ( 8,0 8,0 ( Gross weight Capacity (:),0 (,0 (,00 (8,00 (8,00 (8,00 (8,00 (8 8,0 (,00 (,00 ( Face shovel incl. pin for stick 8,0 ( m³ =,0 (,00 ( m³ m³ =,400 =,400 m³ m³ =,0 ( =,0 (,00 (,00 ( m³ =,400 m³ =,0 (,00 ( m³ =,400 m³ =,400 m³ =,0 (,00 ( m³ =,400 m³ =(,400 m³ =,0,00 ( m³ ( =,0 m³ =,400 m³ =,400 ( m³ =,0,00 (,00 ( m³ =,0 ( m³ =,0 (,00 (,00 ( 8,0 ( 8,0 ( Gross weight,0 kg (, lb) (,0,0 (,00 ( Gross weight,00 kg (,0 lb),0 (,0 ( Stick,00 (,0 (,0 ( (,0 (,0,0 ( Boom with main valve block, TriPower linkages and rods Backhoe bucket,0 incl. pins stick ( for,0 (,0 (and linkage,4main ( )( ),4,4 Crates with valve block, catwalks, railings and other parts ( ),4 ( ) Capacity (:) Gross weight.0 m (8.8 yd) 4, 4,800 kg (4,0 lb) 4,800 (,40 (8 0,000 (,00 kg (,80 lb) 4,0 (,00 (,80 ( kg (,00 lb) 4,0 ( 8,080 (,80 (,00 kg,0 lb),80 (,80 (,80 (,80 ( 0 (,80 (,80,80 ( (,00 (8 8,00 (8 8 Bundle with boom cylinders,00 (,00 (8 8 0 ( 0 ( Gross weight,00 kg (,0 lb) 00 ( 4 4,800 ( 4,800 ( 00 ( 4 00 ( 4 00 ( 4 4,800 ( 4,800 ( Bundle with stick cylinders 00 ( 4,00 ( 4,800 ( Gross weight,400 kg, lb) 00 ( 4 0 ( 0 ( ( 0 ( ( 0 (0 0 0 ( 8 (8 8,00,00 (8 (8 8(8,00 8,00,00 (8 8,00 (8 8(8 8,00 Gross weight,80,00 (8 8 (,00 (8 8 0 ( 0 (,00 (,80 (,80 (,00 (,00 (,80 (,80 (,00 (,00 (,0 ( 00 4( 00 ( 4 00 ( ( 4 00 ( (00 4 (( 4,8004,800 ( 4,800 ( 4,800 4,800( 4,800 ( 4,800 (

8 Component accessibility on superstructure. Diesel engines 4. Oil coolers. Rotary distributor. Operator s seat. Gearboxes with hydraulic pumps. Hydraulic tank 8. Travel valves. BCS tower. Engine radiators with hydraulically driven fan. Swing drives. Switch cabinet and battery box. Auxilliary seat Anti-slip walking areas Anti-slip catwalks Optional Equipment General Export Crating Finishing as per end user s corporate colors Customizing of logos as per customer s specification Superstructure Hydraulic service crane on superstructure with auxiliary engine Mesabi radiators instead of standard radiators (Cuins engines only) Oil change interval extension for engine oil up to,000 hrs (Cuins engines only) Engine oil burn system (Cuins engines only) Centrifuges for engine oil filtration (Cuins engines only) Folding access stairway, stairway angle approx. 4 Round container with a standard 00 l grease barrel (instead of,000 l grease container) Lubricated pinion for greasing of internal gearing of swing ring Various cold-weather packages Cab Various heating and air-conditioning systems Roller blinds at all windows Outside-mounted sun shields Additional instrumentation Undercarriage Track pad width,400 or,00 Automatic lubrication of rollers by central lube system Cover plate under carbody (belly plate) Attachment Xenon lighting on boom Special wear packages Further optional equipment on request Effective Date: February 0. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Bucyrus makes no other warranty, express or implied. Bucyrus is a registered trademark of Bucyrus International, Inc. in the USA and many other countries. Copyright 0 Bucyrus International, Inc.