3 Pole, 27 Amp, Non-Reversing Across The Line Contactor With V Ac Coil and 1 No Auxiliary Contact

Transcription

1 3804 South Street , TX Nacogdoches Phone: Fax: A Contact-600V 120VAC Coi Thomas & Betts Catalog Number Manufacturer Description Weight per unit Product Categy Dimensions and Weight Size Descriptions Description Long Description A Thomas & Betts 3 Pole, 27 Amp, Non-Reversing Across The Line Contact With V Ac Coil and 1 No Auxiliary Contact (lbs/each) IEC Contacts 44x74x74mm CONTACTOR-600V 120VAC COI 3 pole, 27 amp, non-reversing across the line contact with V AC coil and 1 NO auxiliary contact Product Type A12, 3P Contr, 110/50, /60 special features Terminal type: Screw terminals Manufacturer Infmation Brand ABB GTIN Manufacturers Part Number A UPC Taxonomies, Classifications, and Categies Categy Description AC CONTACTORS Type Contacts Packaging Carton 1 Package 63 Weight Per each 0.77 Uses, Certifications, and Standards Application standard Mainly used f controlling 3-phase mots and generally f controlling power circuits up to 690 V AC 220 V DC. The contacts can also be used f many other applications such as isolation, capacit switching, lighting. BV, CB, CCC, CSA, cul, CE, DNV, RINA, RoHS, UL

2 A.., AL.., AE.., AF.., a.c. Circuit Switching Switching of 3-phase Cage Mots 3 M 3 3 R AC-3 utilization categy When making, the mot current is about 6 x I n. Breaking while the mot is running at I n mot F.L.C. Switched-on current 6 x In Switched-off current = In Switched-on current = Switched-off current = In Time Switching of Resistive Circuits AC-1 utilization categy When making, the switched-on current is equal to the I n load rated current with cos ϕ Time IEC A 9 A 12 A 16 A 26 A 30 A 40 AL 9 AL 12 AL 16 AL 26 AL 30 AL 40 AC-3 Power θ < 55 C, 400 V kw rating Rated θ < 55 C, 400 V A AC-3 operational θ < 55 C, 415 V A current θ < 55 C, 690 V A * 21* 25* IEC * F AL AL 40 see "Technical Data" Rated θ < 40 C, 690 V A AC-1 operational θ < 55 C, 690 V A current θ < 70 C, 690 V A With conduct cross-sectional area mm Rated operational voltage V 690 UL/CSA 3-phase Mot-rating Mot-rating 480 V hp General Use Rating Amp-rating 600 V A pole Contacts Selection & Ordering Select contact type. Select contact coil voltage on cover folding page 0/1, accding to control circuit supply. (Please quote coil voltage in plain text). Note: The AF contact range, with a.c./d.c. Electronic Coil Interface, is available from AF 50 up to AF Nema Size P A A a.c. Control supply range A A A..., AF... Contacts A A AL AL d.c. Control supply range AL AL AL..., AE..., AF... Contacts AL AL Contact Main Accessies Selection & Ordering Select accessy type and quote required data in plain text. Auxiliary contacts Timers Interlocks CA 5-.., 1-pole, CAL..-.., 2-pole TP.., Pneumatic (A..., AE..., AF... contacts only) TE.., Electronic Supply voltages: 24 V a.c./d.c., ; ; V a.c. VE 5-., Mechanical / Electrical VM..., Mechanical CA pole, front mounting CA pole, front mounting 1 x N.O. 1 x N.C. TP 40 DA, TP 180 DA Direct timing - Front mounting TE5S Direct timing - Separate mounting VE 5-1 VM 5-1 TP 40 IA, TP 180 IA mounting between 2 contacts Protection of 3-phase mots Selection & Ordering Select O/L relay type and setting range accding to mot F.L.C. Surge suppresss O/L relays RV.., (Varist) a.c./d.c. RC.., (Capacit) a.c. RT.., (Transil diode) d.c. TA..DU.., Thermal O/L relay E..DU.., Electronic O/L relay Standard starting time s tripping class 10 A & setting range in Amps TA 25 DU E16 DU RV 5 RC 5-1 RT TA 42 DU F further infmation: A.. AF.. AL../TAL.. AE../TAE UA..RA/UA.. GA../GAE.. AM.. >> Description pages 2/6, 2/10 2/18, 2/20 2/14 2/14 2/34, 2/38 2/44 2/46 >> Ordering Details pages 2/7, 2/11 2/19, 2/21 2/15, 2/16 2/15, 2/16 2/35, 2/39 2/45 2/47 >> Technical Data pages 2/ /75 2/37, 2/41 2/44 2/46 2/2 Low Voltage Products

3 3-pole Contacts A 50 A 63 A 75 A 95 A 110 A 145 A 185 A 210 A 260 A 300 AE 50 AE 63 AE 75 AE 95 AE 110 AF 145 AF 185 AF 210 AF 260 AF 300 AF 400 AF 460 AF 580 AF 750 AF 1350 AF bar / mm bar / mm bar / mm x x 240 2x240 2x50x8 2//100x5 3//100x A A A A AF AF AF A A A A AF AF AF A A AE AE AF AF AF AF AF AE AE AF AF AF AF AF AE AF CAL pole, side mounting CAL pole, side mounting CAL B 1 x N.O. + 1 x N.C. 1 x N.O. + 1 x N.C. (1 st block) 1 x N.O. + 1 x N.C. (2 nd block) Inverse timing - Front mounting TE5S Sep. mounting TE5S Direct timing - Separate mounting VE 5-2 VM 300H VM 750H VM 1650H RV 5 RC 5-2 RT 5 The AF AF 1650 contacts are equipped with a built-in electronic coil interface which eliminates the need of extra surge suppresss - F A A 300 use RC-EH 300 TA 75 DU... TA 80 DU... TA 200 DU... TA 450 DU TA 110 DU E 200 DU E 320 DU E 500 DU E 800 DU E 1250 DU Infmation about: >> Accessies... section 4 >> Mot Protection... section 5 >> Approvals... section 7 >> Terminal Marking... section 8 >> Dimensions... section 9 Low Voltage Products 2/3

4 A.., AL.., AE.., EK.., a.c. Circuit Switching Switching of Resistive Circuits 3 R AC-1 utilization categy When making, the switched-on current is equal to the I n load rated current with cos ϕ Switched-on current = Switched-off current = In Time IEC A 9 A 16 A 26 AL 9 AL 16 AL 26 Rated θ < 40 C A AC-1 operational θ < 55 C A current θ < 70 C A With conduct cross-sectional area mm Rated operational voltage V 690 UL/CSA General Use Rating Amp-rating 600 V A Nema Size pole Contacts Selection & Ordering Select 4 N.O. 2 N.O. + 2 N.C. main poles. Select contact type. Select contact coil voltage on cover folding page 0/1, accding to control circuit supply. (Please quote coil voltage in plain text). Note: The 4 N.O. 2 N.O. + 2 N.C. AF contact range with a.c./d.c. Electronic Coil Interface, is available from AF 45 up to AF N.O. main poles a.c. Control supply range A..., EK... Contacts d.c. Control supply range AL..., AE..., EK... Contacts 2 N.O. + 2 N.C. main poles a.c. Control supply range A... Contacts A A A AL AL AL A A A d.c. Control supply range AL AL AL..., AE... Contacts AL Contact Main Accessies Selection & Ordering Select accessy type and quote required data in plain text. Auxiliary CA 5-.., 1-pole contacts CAL..-.., 2-pole Timers Interlocks TP.., Pneumatic f A..., AE... contacts only TE.., Electronic Supply voltages: 24 V a.c./d.c., ; ; V a.c. VE 5-., Mechanical / Electrical VM..., VH... Mechanical mounting between 2 contacts CA pole, front mounting CA pole, front mounting 1 x N.O. 1 x N.C. TP 40 DA, TP 180 DA Direct timing - Front mounting TE5S Direct timing - Separate VE 5-1 VM 5-1 Surge suppresss RV.., (Varist) a.c./d.c. RC.., (Capacit) a.c. RT.., (Transil diode) d.c. RV 5 RC 5-1 RT 5 F further infmation: A.. EK.. AF.. AL../AE.. TAL../TAE.. AM.. >> Ordering Details... pages 2/22 2/24, 2/30 2/31 2/26 2/28 2/47 >> Technical Data... pages 2/ /74 2/ /80 2/ /74 2/46 2/4 Low Voltage Products

5 4-pole Contacts A 45 A 50 A 75 AE 45 AE 50 AE 75 EK 110 EK 150 EK 175 EK 210 EK 370 EK 550 EK x x x A EK EK EK A EK A EK EK EK AE EK EK EK AE EK AE EK EK EK A A AE AE CAL pole, side mounting CAL pole, side mounting 1 x N.O. + 1 x N.C. 1 x N.O. + 1 x N.C. TP 40 IA, TP 180 IA Inverse timing - Front mounting mounting TE5S Direct timing - Separate mounting (interpose an N.. contact relay f EK EK 1000) VE 5-2 VH 145 (Mechanical / Electrical) VH 300 (Mechanical / Electrical) VH 800 RV 5 RC 5-2 RT 5 RC-EH 300 RC-EH 800 (Varist + RC) Infmation about: >> Accessies... section 4 >> Terminal Marking... section 8 >> Approvals... section 7 >> Dimensions... section 9 Low Voltage Products 2/5

6 60 A 9... A pole Contacts a.c. Operated Application A 9... A 110 contacts are mainly used f controlling 3-phase mots and generally f controlling power circuits up to 690 V a.c. / 1000 V a.c. 220 V d.c. / 440 V d.c. The contacts can also be used f many other applications such as isolation, capacit switching, lighting. Description The A... series 3-pole contacts are of the block type design. Main poles and auxiliary contact blocks A 9... A 40 1-stack contacts: 3 main poles, 1 built-in auxiliary contact, front and side mounted add-on auxiliary contact blocks. A A 110 contacts: 3 main poles, front and side mounted add-on auxiliary contact blocks. Control circuit: a.c. operated with laminated magnet circuit. Accessies: a wide range of accessies is available A 9... A 40 2-stack contacts: 1 st stack with 3 main poles and 1 built-in auxiliary contact, 2 nd stack with 4 built-in auxiliary contacts, side mounted add-on auxiliary contact blocks. The built-in auxiliary contact elements are mechanically linked. Variants 4-pole: A 9... A 75 contacts (with 4 N.O. 2 N.O. + 2 N.C. main poles). d.c. operated: AL 9... AL 40, AL 9Z... AL 16Z and AE AE 110 contacts. d.c. operated with large coil voltage range: TAL 9... TAL 40 and TAE TAE 110 contacts. electronic coil interface (a.c./d.c. operated): AF AF 110 contacts. contacts f capacit switching (UA..., UA..RA types). contacts f d.c. switching (GA..., GAE... types). magnetically latched contacts (AM... types). Location of surge suppresss. Connecting point f control leads in top part of main terminals of A A 110 contacts Clear marking of coil voltages and frequencies. Terminal marking accding to IEC , EN 50005, EN and NEMA standards. Quick fixing on mounting rail accding to IEC 60715, EN standards: 35 x 7.5 mm f A 9... A 40 contacts, 35 x 15 mm f A 9... A 75 contacts, 75 x 25 mm f A A 110 contacts. Location of side-mounted accessies (on right left hand side). Holes f screw fixing (screws not supplied). Terminals delivered in open position with captive screws. Screwdriver guidance f all terminals. Degree of protection (IP...) of terminals accding to IEC : A 9... A 40 contacts: IP 20 f main and auxiliary terminals. A A 110 contacts: IP 10 f main terminals, IP 20 f auxiliary terminals. A1 V Hz A2 1 L1 3 L2 5 L A T1 4 T2 6 T3 E1677D Location of function marker. Stops f attaching front mounted accessies. Terminal screws: A 9... A 16 contacts: M3.5 Pozidriv (+,-) No. 2 f all terminals, A 26 contacts: M4 Pozidriv (+,-) No. 2 f main and auxiliary terminals, M3.5 Pozidriv (+,-) No. 2 f coil terminals, A 30, A 40 contacts: M5 Pozidriv (+,-) No. 2 f main terminals, M3.5 Pozidriv (+,-) No. 2 f auxiliary and coil terminals, A A 75 contacts: M6 Pozidriv (+,-) No. 2 f main terminals, M3.5 Pozidriv (+,-) No. 2 f coil terminals, A A 110 contacts: M8 Hexagon socket (s = 4 mm) f main terminals, M3.5 Pozidriv (+,-) No. 2 f coil terminals. 2/6 Low Voltage Products 1SBC100122C0202

7 A 9... A pole Contacts a.c. Operated Ordering Details 1SBC F0301 IEC UL/CSA Auxiliary Type Order code Weight contacts kg Rated Rated 3-Phase General fitted power current mot use 1 st stack 2 nd stack 400 V θ < 40 C rating rating AC-3 AC V 600 V state coil voltage state coil voltage code Pack ing kw A hp A (see table below) (see table below) 1 piece A A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SBL R A SFL R A SFL R A SFL R A SFL R A SFL R A SFL R A SBC F pole Contacts 1SBC F0301 A A SBC F0301 Coil voltages and codes Voltage Voltage Code V - 50Hz V - 60Hz Other voltages: page 0/1. >> Accessy Fitting Details... page 2/8 >> Thermal O/L Relays... page 2/9 >> General - Approvals... section 7 >> Auxiliary Contacts f Safety Circuits... page 2/63 >> Terminal Marking and Positioning... section 8 >> Technical Data... page 2/64 >> Dimensions... section 9 Low Voltage Products 2/7 1SBC100122C0202

8 A 9... A pole Contacts Main Accessies Fitting Details - F Ordering Details, see "Accessies" Many configurations of accessies are possible depending on whether these are front mounted side mounted. Contact types Main poles Available auxiliary contacts Front mounted accessies Auxiliary contact 1-pole CA 5-.. Auxiliary contact 4-pole CA 5-.. ( 1-pole CE 5-..) A 9... A 26 A 9... A (5) A 9... A 16 A 9... A A 30, A 40 A 30, A (5) A 30, A (5) A A A A A A A 95, A A 95, A A 95, A to 4 x CA 5-.. (1 to 2 x CE 5-.. max.) (1) Side mounted accessies 1 x CA 5-.. (4-pole) 1 x TP.. A 1 to 5 x CA 5-.. (1 to 3 x CE 5-.. max.) (2) 1 x CA to 6 x CA 5-.. (1 to 5 x CE 5-.. max.) (3) 1 to 6 x CA 5-.. (1 to 5 x CE 5-.. max.) (3) 1 x CA 5-.. (4-pole) + 2 x 1-pole CA 5-.. CE 5-.. (3) 1 x CA 5-.. (4-pole) + 2 x 1-pole CA 5-.. CE 5-.. (3) 1 to 6 x CA 5-.. (1 to 5 x CE 5-.. max.) (3) 1 to 2 x CA 5-.. (1 to 2 x CE 5-.. max.) + 1 to 2 x CAL 5-11 (6) 1 to 2 x CAL x TP.. A + 1 x CA 5-.. (1-pole) + 1 to 2 x CAL to 2 x CAL x TP.. A + 2 x CA 5-.. (1-pole) 1 x TP.. A + 1 to 2 x CAL x CA 5-.. (1-pole) + 1 to 2 x CAL x CA 5-.. (4-pole) + 2 x 1-pole CA 5-.. CE 5-.. (3) + 1 x CA 5-.. (4-pole) + 2 x 1-pole CA 5-.. CE 5-.. (3) + + (1 to 2 x CE 5-.. max.) (1 to 5 x CE 5-.. max.) (3) 1 to 2 x CA to 6 x CA x CA 5-.. (4-pole) + 1 x 1-pole CA 5-.. CE 5-.. (2) Interlock unit VM 5-.. VE 5-.. ( 1-pole CEL 18-..) ( 1 x CE 5-..) (4) Auxiliary contact 2-pole CAL.. Pneumatic timer TP.. A (1) The total number of N.O. N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 2. (2) The total number of N.O. N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 3. (3) The total number of N.O. N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 5. (4) CE 5-.. auxiliary contacts not allowed in mounting position 5. (5) 2 N.C. CA 5-.. auxiliary contacts maximum in mounting position 5. (6) A 9, A 12, A in mounting position 5, TP..DA not allowed. 1 to 2 x CAL ( 1 to 2 x CEL 18-..) 1 x CAL ( 1 x CEL 18-..) 1 to 2 x CAL ( 1 to 2 x CEL 18-..) 1 x VM 5-1 VE x VM 5-1 VE x VM 5-1 VE x VM 5-1 VE x VE x VE x VE x VE x CAL x VE x VE x CAL CE 5-.. auxiliary contacts not allowed in mounting position 5. CE 5-.. auxiliary contacts not allowed in mounting position 5. Contact and main accessies F mounting position diagram, see "Technical Data" (other accessies available) The accessies provided f the A A 110 contacts can be used f the AF AF 110 types. RV 5/.. VE 5-1 A CA 5-10 CAL 5-11 CA 5-31M TA 25 DU.. E1684D TP 40 DA 2/8 1SBC100122C0202 Low Voltage Products

9 A 9... A pole Contacts Thermal O/L Relays Fitting Details - F Ordering Details, see "Mot Protection" The addition of a thermal O/L relay on the contact does not prevent fitting of many other accessies as shown below. Contact Thermal O/L relays - No mounting kit required, direct mounting types TA 25 DU.. TA 42 DU TA 75 DU TA 80 DU TA 110 DU to A to A to A to A to A A 9... A 26 TA 25 DU.. A 30, A 40 TA 25 DU.. (1) TA 42 DU.. (1) A A 75 TA 75 DU.. A 95, A 110 TA 80 DU.. (1) TA 110 DU.. (1) (1) Accding to the current value. 2 Contact and O/L relay The O/L relays provided f the A A 110 contacts can be used f the AF AF 110 types. RV 5/.. VE 5-1 A CA 5-10 CAL 5-11 CA 5-31M TA 25 DU.. TP 40 DA E1685D 3-pole Contacts Low Voltage Products 2/9 1SBC100122C0202

10 Auxiliary Contacts f Safety Circuits 3-pole Contacts Mechanically Linked Contact Elements f Contacts (known as "fced contacts", "positively activated contacts" "linked contacts"). Definitions from standards: mechanically linked contact elements accding to IEC , Annex L 3.0. Combination of "n" Make auxiliary contact element(s) and "m" Break auxiliary contact element(s) are designed in such a way that they cannot be in the closed position simultaneously. One control circuit device may have me than one group of mechanically linked contact elements. The table below gives the contacts that offer mechanically linked auxiliary contacts accding to IEC , Annex L. Mirr Contacts Definitions from standards: mirr contact accding to IEC , Annex F 2.1. Nmally closed auxiliary contact (N.C.) which cannot be in the closed position simultaneously with the nmally open (N.O.) main contact. 2 The table below indicates the contacts that offer a built-in auxiliary mirr contact. The CA 5-13, CA 5-22, CA 5-31, CA 5-04 and CA 5-01 (respectively 4-pole and 1-pole auxiliary contact blocks) and the CAL 5-11 (2-pole auxiliary contact block) when fitted on A 9... A 75, AF AF 75 AL 9... AL 40 contacts have their own N.C. auxiliary mirr contacts. The CAL pole auxiliary contact blocks when fitted on A A 300 and AF AF 750 contacts have their own N.C. auxiliary mirr contacts. F AF 1350, AF 1650 use 2 N.C. auxiliary contacts in series f mirr contact, one CAL on each side of the contact. 3-pole A... and AL... contacts + one CA pole add-on auxiliary contact block Contacts Built-in auxiliary Add-on auxiliary contact blocks contacts + CA CA CA Applications A/AL A/AL A/AL A/AL A/AL A/AL A/AL A/AL A/AL A/AL A/AL A/AL The infmation provided f AL contacts can also be used f AL..Z... and TAL... contacts. F each contact type, see "Accessy Fitting Details". Direct Opening Action of N.C. Built-in Auxiliary Contacts Annex K2.1 of IEC defines a control switch with direct opening action: "the full contact opening of the break contact element(s) is obtained when the actuat is moved through the direct opening travel by applying the fce stated by the manufacturer". The N.C. built-in auxiliary contacts of contacts ARE NOT CONCERNED by the annex K. Nevertheless, N.C. auxiliary contacts are designed to have "direct opening action" and are suitable f uses such as lifts / elevats (acc. to EN 81-1). >> Accessies Fitting Details... pages 2/8, 2/12, 2/17 Low Voltage Products 2/63 1SBC100122C0202