LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 1 PROJECT NO

Size: px
Start display at page:

Download "LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 1 PROJECT NO"

Transcription

1

2 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 1 PROJECT NO PART 1 GENERAL 1.1 GENERAL REQUIREMENTS.1 The Instructions to Bidders, the General Conditions of CCDC2-1994, Supplementary General Conditions and all Sections of Division 1 apply to and form part of this Section of the Specification..2 Indoor inclined platform wheelchair lifts. 1.2 RELATED SECTIONS.1 Section Cast-In-Place Concrete: Anchor placement in concrete..2 Section Masonry Assemblies: Anchor placement in masonry..3 Section Rough Carpentry: Blocking in framed construction for lift attachment..4 Section Gypsum Board Assemblies.5 Section Fire Alarm System: Building Fire Alarm Integration system to connect the lift control system with the building fire alarm system..6 Division 16 - Electrical: Electrical power service and wiring connections..7 Division 16 - Electrical: Concealed low voltage control wiring..8 Division 16 - Electrical: Intercom and wiring. 1.3 REFERENCES.1 ASME A Elevator and Escalator Electrical Equipment..2 ASME A18.1a Safety Standard for Platform Lifts and Stairway Chairlifts..3 ASME A18.1, Section 6, Private Residence Inclined Platforms..4 CSA B Elevator and Escalator Electrical Equipment..5 CSA B355 - Lifts for Persons with Physical Disabilities..6 CSA B Private Residence Lifts for Persons with Physical Disabilities..7 ICC/ANSI A Accessible and Usable Buildings and Facilities..8 NFPA 70 - National Electric Code..9 CSA - National Electric Code. 1.4 SUBMITTALS.1 Submit under provisions of Section Product Data: Manufacturer's data sheets on each product to be used, including: Submit manufacturer's installation instructions, including preparation, storage and handling requirements..2 Include complete description of performance and operating characteristics..3 Show maximum and average power demands.

3 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 2 PROJECT NO SUBMITTALS (CONT D).3 Shop Drawings:.1 Show typical details of assembly, erection and anchorage..2 Include wiring diagrams for power, control, and signal systems..3 Show complete layout and location of equipment, including required clearances. 1.5 QUALITY ASSURANCE.1 Manufacturer Qualifications: Firm with minimum 10 years documented experience in manufacturing of inclined wheelchair platform lifts of installations of type specified..2 Installer Qualifications: Firm licensed to install equipment of this scope, with evidence of experience with specified equipment. Installer shall maintain an adequate stock of replacement parts and have qualified people available to ensure timely maintenance and call back service at the project site. 1.6 REGULATORY REQUIREMENTS.1 Provide platform lifts in compliance with:.1 ASME A Safety Standard for Platform Lifts and Stairway Chairlifts..2 ASME A Elevator and Escalator Electrical Equipment..3 NFPA 70 - National Electric Code..2 Provide platform lifts in compliance with:.1 CSA B355 - Lifts for Persons with Physical Disabilities..2 CSA B44.1/ASME A Elevator and Escalator Electrical Equipment..3 CSA - National Electric Code. 1.7 DELIVERY, STORAGE, AND HANDLING.1 Store products in manufacturer's unopened packaging until ready for installation..2 Store components off the ground in a dry covered area, protected from adverse weather conditions. 1.8 PROJECT CONDITIONS.1 Do not use wheelchair lift for hoisting materials or personnel during construction period.

4 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 3 PROJECT NO WARRANTY.1 Warranty: Provide a two year limited warranty covering replacement of defective parts and excluding labour. Preventive maintenance agreement required..2 Extended Warranty: Provide an additional five year limited warranty covering replacement of defective parts and excluding labour for a total of seven years. Preventive maintenance agreement required MAINTENANCE SERVICE.1 Furnish service and maintenance for elevator system and components for the following period from Date of Substantial Completion..1 Five years..2 Include systematic examination, adjustment, and lubrication of elevator equipment. Repair or replace parts whenever required. Use parts produced by manufacturer of original equipment. Replace wire ropes when necessary to maintain required factor of safety..3 Provide emergency call back service for this maintenance period..4 Perform maintenance work using competent and qualified personnel approved by elevator manufacturer or original installer. PART 2 - PRODUCTS 2.2 MANUFACTURERS.1 Acceptable Manufacturer: Garaventa Lift; Canada A St., Surrey, BC V3W 7B3. ASD. Toll Free: Tel: (604) Fax: (604) bramsay@garaventalift.com; Web Requests for substitutions will be considered in accordance with provisions of Section STAIR LIFT FOR STRAIGHT STAIRWAYS.1 Inclined Platform Lift: Garaventa Stair-Lift Model XPRESS II to serve one flight of straight stairs, with two landings and two stops. Lift consists of an extruded aluminum guide rail, a folding platform that is moved along the guide rail by an integrated rack and pinion drive system, overspeed safety system and call stations at each landing. Conform to the following design requirements:.1 Application: Indoor.

5 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 4 PROJECT NO Platform Load Rating: 495 lbs (225 kg), with minimum safety factor of STAIR LIFT FOR STRAIGHT STAIRWAYS.3 Travel Speed: 13 fpm (4 m/min) traveling up; 16 fpm (5 m/min) traveling down..4 Platform Deck: Surface shall be slip resistant with the following features:.1 Platform Size A (ADA Compliant): 31-1/2 inches (800 mm) wide by 49-1/4 inches (1250 mm) long..5 Platform Operation:.1 Automatic Fold: Folded and unfolded electrically from the call station..2 Emergency Manual Fold: When left in the open position, platform may be manually folded and retained in the closed position..6 Under Platform Obstruction Sensing:.1 Provide under-platform sensing device to stop platform from traveling in the downward direction when encountering 4 lb/f (20 N) of pressure..2 Platform is permitted to travel in the opposite direction of the obstruction to allow clearing..7 Passenger Restraining Arms:.1 Platform equipped with retractable passenger restraining arms in compliance with ASME A18.1a..2 Arms stop moving when an obstruction causing 4 lb/f (20 N) of pressure is encountered and immediately retract when signal is removed..3 Arms folded and unfolded electrically from the call stations or platform controls..4 Provide with means to manually unlock and open the restraining arms for passenger emergency evacuation..5 Top of arms mounted 32 inches (800 mm) to 38 inches (1000 mm) above platform deck. When in guarding position arms are located above the perimeter of the platform..6 Gaps between ends of the arms shall not exceed 4 inches (100 mm).

6 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 5 PROJECT NO STAIR LIFT FOR STRAIGHT STAIRWAYS (CONT D).8 Boarding Ramps:.1 Provide boarding sides of platform with retractable ramps positioned for travel at a height of 6 inches (150 mm) measured vertically above platform deck..2 Lock ramps in guarding positions during travel. When platform is at the landing, only the retractable ramp servicing the landing shall be operable..3 Ramps folded and unfolded electrically..4 Retractable ramps, in the guarded position, shall withstand a force of 125 lb/f (550 N) applied on any 4 inches (100 mm) by 4 inches (100 mm) area. This force shall not cause the height of the ramp, at any point in its length, to be less than 6 inches (150 mm) measured vertically above the platform deck..5 Provide a means to manually unlock the ramps for emergency evacuation when platform is located at landing..6 Provide with a bi-directional obstruction sensitive device on the travel direction side end of the platform to stop the lift when 4 lb/f (20 N) of pressure is encountered. Platform is permitted to travel in the opposite direction of obstruction to allow clearing..9 Platform Sidewall:.1 Provide on the non-boarding and non-guide rail side of the platform a sidewall of not less 6 inches (150 mm) in height, measured vertically from the platform deck..2 When the platform is folded sidewall shall cover the platform controls, providing protection from vandalism..10 Hand Grips:.1 Equip platform with a 1-1/4 inch (32 mm) tubular steel hand grip or grab bar at the top of the platform. Hand grip is to cover the entire width of the platform..11 Clearances Dimensions:.1 Platform shall not protrude more than 10-1/4 inches (260 mm) from the

7 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 6 PROJECT NO mounting surface when folded and stored. 2.2 STAIR LIFT FOR STRAIGHT STAIRWAYS (CONT D).12 Controls:.2 Platform shall not protrude more than 40-1/4 inches (1020 mm) from the mounting surface when unfolded and in use..1 Controls: 24 VDC Low Voltage type..2 Platform equipped with emergency stop switch located within reach of passenger. Emergency stop button shall cause electric power to be removed from the drive system stopping lift immediately..3 Operating controls shall be two separate 1-1/2 inch (36 mm) diameter round constant pressure buttons with directional arrows, mounted on the front surface of the platform control panel..4 When the platform arrives at landing and the user releases the directional control button, the passenger restraining arms and boarding ramp shall unfold automatically allowing passenger to disembark..5 Platform control panel includes a receptacle for an optional plug-in handheld attendant pendant control..6 Platform equipped for: Keyless.7 Provide control wiring to allow the platform to be folded into the storage position from the opposite call station..13 Passenger Seat: Fold-down type with safety belt. Minimum rated load of 250 lbs (115 kg)..14 Side Loading Platform: Provide with automatic folding ramps and kickplates at boarding sides of platform..15 Attendant Hand-Held Pendant Control: Provide lift with a plug-in pendant control for attendant operation..16 Autofold Platform: Provide to automatically fold platform into storage position when left unused in open position at lower landing for field-adjustment period of 1 to 10 minutes..17 Platform on-board Emergency Alarm: Provide platform with an on-board alarm that sounds when emergency stop button is pushed. The alarm shall have a battery

8 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 7 PROJECT NO back-up so that it will continue to function if lift power is lost. 2.2 STAIR LIFT FOR STRAIGHT STAIRWAYS (CONT D).2 Drive and Guide Rail System:.1 Operation:.1 Motor: 3/4 HP (0.6 kw) electric motor with an integrated brake..2 Required power: VAC, single phase, 50/60 Hz. on a dedicated 15 amp circuit..3 Power Transmission: Worm gear reduction to a pinion moving on a fixed gear rack..4 Provide a frequency inverter to smoothly start and stop the platform motion..5 Locate drive carriage and associated control devices within the platform conveyance..6 Provide an upper final limit switch to stop the lift in the event of a failure of the primary limit switch..7 Equip drive system with an hour counter..2 Guide Rail System:.1 Two-part guide rail system consisting of: 1) Main Upper Rail: Anodized aluminum extrusion weighing 8 lb/ft (11.9 kg/m) with integrally mounted zinc plated gear rack. 2) Lower Rail: 1-1/2 inches (38 mm) by 2-1/2 inches (64 mm) anodized aluminum extrusion..2 Rail Mounting: 1) Rails directly mounted to the stairway wall. 2) Upper rail attached to a 2 inch (51 mm) by 8 inch (203 mm) board that is secured to the wall. Lower rail attached to a 2 inch (51 mm) by 4 inch (102 mm) board secured to the wall. Fasten each board to every available stud with a minimum of two fasteners. 3) Mount rails to steel support posts secured to the lower landing floor

9 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 8 PROJECT NO and stair treads. Support posts shall be 2-1/2 inches (64 mm) by 2-1/2 inches (64 mm) hollow structural steel. 2.2 STAIR LIFT FOR STRAIGHT STAIRWAYS (CONT D).3 Provide a mechanical stop at the upper landing to prevent over-travel of the drive carriage in the event of a switch failure..3 Provide overspeed governor and brake on upper carriage drive, containing mechanical overspeed sensor and lock, with electrical drive cut-out protection..4 Provide with manual handwheel for emergency operation..5 Emergency Battery Operation:.1 Auxiliary Power: Provide an external battery back-up system for normal up/down lift operation during a power failure for a minimum period of one hour with rated load..3 Pedestrian Grabrail Integrated with Guide Rail:.1 Provide a pedestrian grabrail to be mounted to the top of the upper rail..2 The top of the grabrail gripping surface shall be between 31 inches (785 mm) and 50 inches (1270 mm) above the stair nosing and have a smooth gripping surface 1-1/2 inch (38 mm) in diameter..3 Grabrail will be on the same plane as the upper rail of the lift..4 Grabrail shall meet local code requirements for height above stair noses depending on stair angle and platform size..4 Call Stations:.1 Provide surface mounted call stations at both landings..2 Call station operating voltage 24V..3 Call stations shall be provided with directional control buttons for call and send..4 A one-touch control system shall be used to automatically fold/unfold the platform, boarding ramps and passenger restraining arms..5 Call stations shall be equipped for: Keyless Operation.6 Mounting:

10 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 9 PROJECT NO Lower landing call station: Surface mounted call station.2 Upper landing call station: Surface mounted call station. 2.2 STAIR LIFT FOR STRAIGHT STAIRWAYS (CONT D).5 Finish: PART 3 EXECUTION.1 Design and fabricate lift to manufacturer's standard design for indoor and outdoor locations. 3.2 EXAMINATION 1) Aluminum guide rails and ramps to be anodized aluminum. Steel components shall be painted with electrostatically applied and baked powder coat as follows: Fine Textured Satin Grey (RAL 7030)..1 Do not begin installation until substrates have been properly prepared..2 Verify required supports are correct..3 Verify electrical rough-in is at correct locations..4 If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding. 3.3 PREPARATION.1 Clean surfaces thoroughly prior to installation..2 Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions. 3.4 INSTALLATION.1 Install platform lifts in accordance with in compliance with regulatory requirements specified and the manufacturer's instructions..2 Install system components and connect to building utilities..3 Accommodate equipment in space indicated..4 Startup equipment in accordance with manufacturer's instructions..5 Adjust for smooth operation.

11 LIBRARY LIFT VERTICAL WHEELCHAIR LIFT SECTION GUELPH, ON. PAGE 10 PROJECT NO FIELD QUALITY CONTROL.1 Perform tests in compliance with regulatory requirements specified and as required by authorities having jurisdiction..2 Schedule tests with agencies and Architect, Owner, and Contractor present. 3.6 PROTECTION.1 Protect installed products until completion of project..2 Touch-up, repair or replace damaged products before Substantial Completion. END OF SECTION

12 Xpress II Planning Guide Page I H-DP

13 Table of contents Garaventa - the world s #1 choice for accessibility solutions....3 What is an Inclined Platform Lift?...4 Finishes...5 How it Works...5 Component Identification...6 Standard Platform Safety Features...7 Optional Platform Features...8 Drive System...9 Guide Rails...9 Call Stations...9 Additional Safety Options...10 Outdoor Applications...10 Attachment Methods...12 Pedestrian Grab Rail...13 Wall Height Requirement for Direct Mounting...15 Xpress II Loading Diagram...15 Typical Wiring Layout...16 Technical Reference of Standard Features...17 Xpress II Planning Guide Page I H-DP

14 Garaventa - the world s #1 choice for accessibility solutions. Garaventa has been dedicated to developing safe and reliable accessibility solutions since 1978, and is now an industry leader worldwide. Years of hard work and an uncompromising commitment to quality have enabled us to perfect the internationally renowned Garaventa Stair-Lift. This same commitment has led Garaventa to develop the Xpress II inclined platform lift and the Genesis vertical platform lift. Developed in 1998, the Genesis vertical platform lift incorporates state of the art features with elegant styling and quiet operation. The Genesis is available in a variety of models and configurations with many standard and optional features to choose from. With the development of the Genesis vertical platform lift, Garaventa has taken a significant step towards being able to solve most accessibility challenges for building owners. In 1999 Garaventa introduced the Xpress II, the next generation inclined platform lift for straight stairways. The sleek and attractive Xpress II can be installed indoors or outdoors and is a cost-effective access solution. Our expertise in providing accessibility solutions has enabled our design team to take on the most challenging access situations, and develop innovative solutions for schools, places of worship, offices, hotels, airports, subways and a wide range of public and private buildings around the world. We have built our business on service. Please contact us and let us help solve your access challenges. Garaventa Lift As we are continuously improving our products, specifications outlined in this guide are subject to change without notice. Xpress II Planning Guide Page 3 of H-DP

15 What is an Inclined Platform Lift? An inclined platform lift easily transports a passenger in a wheelchair or someone who has difficulty maneuvering stairs up and down a stairway. The lift can be operated independently or by an attendant with an attendant remote control (optional item). Compatible for indoor and outdoor applications, the Garaventa Inclined Platform Lift is a versatile, attractive and cost-effective accessibility solution. Why an Inclined Platform Lift? No Building Renovations (Modifications) Inclined platform lifts fit easily into most stairways and do not require specially constructed hoist ways. Preserve Heritage Buildings Flexibility in design enables Garaventa s designers to adapt an inclined platform lift to virtually any building site with very little or no structural modifications. The availability of many colors and finishes ensures the lift will blend with its environment and preserve the look of a heritage building. Save Valuable Floor Space Building floor space, whether a business or a school is valuable. Inclined platform lifts utilize very little of this expensive commodity. Meet ADA Requirements Garaventa inclined platform lifts are approved in the ADA Accessibility Guidelines as a means to provide public building access when licensed for independent operation. They may also be used as an accessible means of egress when equipped with an auxiliary standby power system. Design Assistance With over 25 years of experience, Garaventa is willing and able to overcome almost any design challenge you face. Please call our Design Hot Line or us with your accessibility challenge. Phone: productinfo@garaventalift.com Xpress II Planning Guide Page 4 of H-DP

16 Finishes Standard Color The Xpress II rails and loading ramps are made of champagne anodized aluminum. The non-aluminum components of the lift are finished in a durable polyester powder paint coating that is electrostatically applied and baked at 210 C (410 F).Garaventa s standard color, Satin Grey (fine textured),complements a variety of modern and traditional decors (color samples are available upon request). The conveyance cover is made of beige colored high quality ABS/PVC. Custom Colors (Optional) Garaventa also offers a choice of colors from the internationally accepted RAL color charts (color samples are available upon request). The following list of items will be powder coated to the specified color when a custom color is ordered (for some of these items - see picture on right): (a) upper and lower rails, (b) upper rail slot cover, (c) platform grab rail, (d) curved arms, (e) sensing plate, call stations, towers (if ordered), pedestrian grab rail. Optional paint finishes include brass and stainless effects. d e a & b Custom Finishes Upper Carriage c How it Works The platform of the Xpress II travels along two custom designed aluminum rails that can be mounted either directly to the wall or to support posts (towers). The upper rail houses a gear rack and a traveling cable while the lower rail provides lateral support. The platform is propelled by means of a carriage mounted rack and pinion drive system. Traveling Cable Motor Over speed safety Pinion Gear Platform and Drive Systems Over speed Safety The Over speed Safety located in the upper carriage on the platform, consists of a mechanical pawl and electrical cutout switch. In the unlikely event that the lift should descend too quickly, both the mechanical and electrical safety will activate simultaneously and stop the platform from moving. Over speed Wheel Pawl Safety Switch Detent Bracket Actuator Bracket Locking Gear Over speed Safety Xpress II Planning Guide Page 5 of H-DP

17 Component Identification The main components of the Xpress II are: Platform Control Panel Wrap around safety arms Platform Drive Guide Tubes Call Stations Touch-sensitive Ramps Upper Rail Fold down seat (optional) Mains Breaker Switch (Standard location) Platform Lower Rail Platform Sizes Direct mount Configuration shown The platform is available in three standard sizes, with a rated load of 225 kg. (495lbs.) x 1250mm (31 1/2 x 49 1/4 ) -800 x 1000mm (31 1/2 x 39 3/8 ) -750 x 900mm (29 1/2 x 35 1/2 ) For narrower staircases 2 optional platforms are available: -725 x 1000mm (28 1/2 x 39 3/8 ) -675 x 1000mm (26 1/2 x 39 3/8 ) *Curved safety arms not available on 675 x 1000mm platform, powered straight arms can be provided. Platform Controls The durable and vandal resistant platform control panel is mounted to the platform hanger. The standard platform controls consist of two large illuminated Directional Buttons for independent operation and an Emergency Stop Button (with illumination optional). Emergency Stop Switch Plug in for Attendant Remote Control Unit (optional) Key Switch Attendant Remote Control Unit The platform can be equipped with an optional Attendant Remote Control that overrides the Directional Buttons during attendant operation. The remote control unit can be removed when not required. Platform Directional Travel Buttons Xpress II Planning Guide Page 6 of H-DP

18 Standard Platform Safety Features Emergency Stop Button Located on the platform control panel, this large red button is used to stop the lift in an emergency (an illuminated stop button with alarm is also available). Safety Sensing The platform is equipped with safety sensors listed below. These sensors will automatically stop the lift when activated by 1.8 kg (4 lbs.) of pressure. The platform can then be backed away from the obstruction allowing the object to be removed. Leading Ramp Sensor When the platform is called to or from the landing area in the folded up position the leading ramp is sensitive to obstructions. Under Platform Sensing Plate The under platform sensing plate detects obstacles underneath the platform. Bi-Directional Ramp Sensing The ramps are designed to be obstruction sensitive in the direction of travel on the outside of the ramps as well as from within the platform. The internal ramp sensor prevents a wheelchair from being off-center on the platform deck. Platform Grab Rail This safety feature increases the ease with which passengers may load and unload from the platform. Emergency Fold In an emergency the platform is able to be manually folded and will lock in the folded position. Curved Safety Arms Fully automatic curved safety arms are available to further increase the safety of the Xpress II inclined platform lift. Hour Counter The hour counter enables the owner to determine the amount of time the Xpress II inclined platform lift has been used. This is a helpful tool in determining times for preventive maintenance. Keyless Platform The platform comes standard without key. Platform Control Panel Fold down seat (optional) Folding Arms Platform Grab Rail Xpress II Planning Guide Page 7 of H-DP

19 Manual Emergency Lowering Included in standard offer: Lowering hand wheel, allowing the user to lower the platform in case of an emergency Optional Platform Features Folding Seat Assembly Designed for use by semi-ambulatory passengers, the folding seat is equipped with a safety belt. Side Load Designed for confined lower landing areas, this feature opens a side ramp simultaneously with the end ramp. This allows the passenger to wheel onto the platform diagonally offering easier access. Auto Fold This feature will allow the lift to automatically fold, if left unattended for a period of time at a landing. This ensures the stairway remains clear in the event someone forgets to fold the lift. The time delay is adjustable in the field by an authorized Garaventa technician. Emergency Battery Lowering During a power outage this feature allows the lift to be lowered to the bottom landing. The Battery Lowering System is located on the lift inside the platform. Illuminated Emergency Stop Button and Alarm The emergency stop button can be illuminated and activate an onboard alarm when required by code. Change of Direction Time Delay Kit In applications where a time delay is required when changing directions, either by code or user preference, the lift can be equipped with a variable time delay. Keyed platform For additional protection against unauthorized usage. Platform lock An additional safety feature that locks the platform and protects the unit from vandalism. Note: In some areas certain optional features are either not permitted or mandatory depending on local codes. Please consult your local Garaventa representative for clarification Xpress II Planning Guide Page 8 of H-DP

20 Drive System The carriage mounted drive system consists of a 0.75 H.P. motor, a gearbox, pinion gear and flexible traveling cable. Upper Carriage Mains Power The mains power requirement is 208 to 240VAC, single phase, on a dedicated circuit (North America: 20 ampere, Europe: 16 ampere). A lockable supplementary mains disconnect switch is mounted at the end of the upper rail. Traveling Cable Motor Over speed safety Pinion Gear Guide Rails Two aluminum extrusions make up the guide rail assembly. The upper rail houses the rack that the platform s pinion gear utilizes for travel. The platform is mechanically attached to this upper rail. The lower rail is used as a guide track for the rollers of the lower carriage assembly. The upper and lower rail heights are based on the stair angle and the platform size. For more information on rail heights see page 14. Platform and Drive System Upper Rail Lower Rail Call Stations Each landing is equipped with a call station. The call station enables the user to unfold the platform with a touch of a button. If the platform is not at their landing the user simply presses the directional button to bring the platform to their landing. Call Station Options To meet customer or code requirements an optional Emergency Stop Button and an Attendant Call Switch can be added to the call station. Keyless (adjustable in field) This feature allows the user to operate the lift without a key. The standard key switches on the call stations are removed and plugged. Call with Platform Open (adjustable in field) This option is typically used when the lift can not be called from a call station due to overhead clearance issues. With this option, the lift travels with the arms in the horizontal position and platform folded down only. This option which is adjustable in the field can be enabled by a jumper setting on site. An appropriate label (#37033) has to be ordered, which replaces the regular operating instructions manual. Remote Platform Fold This feature allows the platform to be folded up from any call station should the platform be left folded down. Xpress II Planning Guide Page 9 of H-DP

21 Mounting Options The call stations can be mounted on the wall (surface or flush mounted). Flush mount call stations can be pre-wired during the construction or building renovations resulting in a cleaner appearance with no surface wiring. The optional flush call station box dimensions are Length: 185 mm (7 ¼ ), Width: 115 mm (4 ½ ) and Depth: 52 mm (2 ) Directional Buttons Fold/Unfold Buttons Key Switch Attendant Call Button (optional) Additional Safety Options The Xpress II can be equipped with a number of additional safety features: Emergency Stop Button (optional) Audio Visual Alert When the lift is in use, a wall mounted strobe light and audible chime cautions pedestrians in the vicinity that the lift is in operation. The volume of the audible chime can be adjusted on site. Fire Alarm Integration (Fire Service) Designed to interface with a building s fire safety system and interrupt power to the lift when the fire alarm sounds. This ensures the lift will not obstruct stairway traffic during evacuation. If the lift is in use when the alarm sounds, the lift will only allow the passenger to use the constant pressure direction button to travel to the designated landing with the emergency exit. Auxiliary Power This feature ensures that the lift continues to operate during a power outage. The self-contained battery unit can be located up to 4.5 meters (15 ) away from the drive system and will power the lift up to one hour at full capacity. Box Size: 597 mm (23 1/2 ) high x 444 mm (17 1/2 ) wide x 192 mm (7 5/8 ) deep Attendant Remote Control The platform can be equipped with an optional Attendant Remote Control that overrides the Directional Buttons during attendant operation. The remote control unit can be removed when not required. Outdoor Applications Because most components of the Xpress II are made of anodized aluminum they are already prepared for outdoor use. Any components that are not made of aluminum are zinc plated. If the Xpress II is to be used outdoors or in an extreme environment (e.g. near swimming pools, hot tubs, chemicals, etc.) it is necessary to use stainless steel fasteners and support towers (if required, see Attachment Methods). An outdoor platform cover can be purchased (optional) to assist in protection in severe weather areas. Xpress II Planning Guide Page 10 of H-DP

22 A Platform projection B Rail Extension F E D G Recommended Stair Width C Side Load (optional) Note: Dimension F only applies at lower landing when the side load ramp is in the open position. Platform Projection and Rail Extensions Stair Angle Dimension A - Platform Projection 800 x 1250mm Platform (31 1/2" x 48") 112 3/4 94 1/2 85 1/4 79 5/8 75 7/ /8 69 1/4 67 3/4 800 x 1000mm Platform (31 1/2" x 39 3/8") 103 1/8 84 3/4 75 1/2 69 7/8 66 1/8 63 3/8 61 1/8 59 1/2 58 1/8 750 x 900mm Platform (29 1/2" x 35 1/2") 98 1/2 80 3/4 71 5/ /4 59 1/2 57 1/4 55 5/8 54 1/8 Dimension B - Rail Extension 800 x 1250mm Platform (31 1/2" x 49 1/4") 101 1/8 83 3/8 74 1/4 68 3/4 64 3/4 61 3/4 59 1/8 56 3/4 54 5/8 800 x 1000mm Platform (31 1/2" x 39 3/8") 95 5/8 77 3/4 68 3/4 63 1/8 59 1/4 56 1/8 53 1/2 51 1/ x 900mm Platform (29 1/2" x 35 1/2") 93 1/8 75 3/4 66 3/4 61 1/4 57 1/4 54 1/4 51 5/8 49 1/4 47 Note: These dimensions are based on a first riser height of 190mm (7 1/2 ). The platform projection and rail extension will be shorter than indicated for shallow stairs below 25º as they may have shorter first risers, please consult Garaventa Lift. Stair Width Clearance Dimensions for Different Attachment Methods C D E F G Clearance Width Dimensions Rail Protrusion Platform Folded Platform Unfolded Side Load Ramp Stair Width mm in mm in mm in mm in mm in 800 x 1250 mm (31 1/2" x 49 1/4 ) & 800 x 1000 mm (31 1/2" x 39 3/8") Platforms Direct Mount / / / / Towers / / / / /2 *750 x 900 mm (29 1/2" x 35 1/2") Platform Direct Mount / / /2 N/A N/A /4 Towers / / N/A N/A /8 725 x 1000 mm (28 1/2" x 39 3/8") Platform Direct Mount / / / / Towers / / / / /2 675 x 1000 mm (26 1/2" x 39 3/8") Platform Direct Mount / / / / Towers / / / / /2 Note: For direct mount with 2 x8 board, add 1 1/2 to all direct mount dimensions *750x900 platform uses fixed kick plate; not recommended for North America Xpress II Planning Guide Page 11 of H-DP

23 Attachment Methods The aluminum guide and support rails can be directly mounted to the wall or attached to steel support towers. There are various attachment methods used to support the XpressII. Direct Mount Anchored to Solid Walls solid concrete (152mm (6 ) thick minimum) concrete block (203mm (8 ) minimum without reinforcement or 152mm (6 ) minimum with reinforcement) Wood support posts located in wall (4 x 6 minimum).locations determined by Garaventa. Steel support posts located in wall (76mm x 76mm x 6mm wall) (3 x 3 x 1/4 ) minimum. Locations determined by Garaventa. Direct Mount Anchored to Wood Stud or Thin Block Walls The upper rail must be attached to a 2" x 8" board that is secured to the wall. For the lower rail, a 2" x 4" board can be used. Each board must be fastened into every available wall stud with minimum two screw fasteners. Note: Not Suitable for Steel Stud Applications. Freestanding Support Towers Required where no existing support walls are, or when the lift must be located away from a wall structure. solid concrete stairs/landings wood stairs/landings over 76.2mm (3 ) thick concrete steel pan treads (towers must be secured back to the stringer with brackets for extra support) Open Balustrade (Towers in the core) In situations where the stairs cannot support freestanding towers and where direct mounting is not feasible, it maybe possible to install support towers in the open core. This may also be a solution where there is insufficient clearance with towers on the treads. The towers are fastened to the floor and secured to walls or stringers. Direct mount to Wall Tower Thin Structural Wall (Through-Bolting maybe applied) 2 x8 Board 2 x4 Board Direct Mount to 2 x8 and 2 x4 Boards on Wood Stud or Thin Block Wall Upper Rail Lower Rail Tower Base Tower Mount Xpress II Planning Guide Page 12 of H-DP

24 Pedestrian Grab Rail A pedestrian grab rail can be mounted to the top of the upper rail section to assist pedestrians using the stairs Pedestrian Grab Rail A Pedestrian Grab Rail Heights Stair Angle Dimension A Handrail Height 800 x 1250mm Platform (31 1/2" x 49 1/4") 31 1/2 34 1/ /8 43 3/4 47 7/8 52 1/2 58 1/ x 1000mm Platform (31 1/2" x 39 3/8") 30 5/8 32 3/4 35 1/4 37 7/8 40 7/8 44 3/8 48 3/8 53 1/4 59 1/8 750 x 900mm Platform (29 1/2" x 35 1/2") 30 3/8 32 3/8 34 1/ / /4 51 1/4 56 7/8 Overhead Clearances Required Stair Angle Dimension B - Overhead Clearance Platform Folded Up (No Arms) 800 x 1250mm Platform (31 1/2" x 49 1/4") 56 1/8 60 7/8 65 7/8 71 1/4 77 1/ / / /8 800 x 1000mm Platform ( 31 1/2" x 39 3/8") 54 5/8 58 3/8 62 1/ /8 77 1/2 83 7/8 91 1/ /2 750 x 900mm Platform ( 29 1/2" x 35 1/2") 51 7/8 54 1/8 56 3/4 59 3/4 63 1/4 68 3/8 74 5/ /8 Dimension C - Overhead Clearance Platform Folded Up (With Arms) 800 x 1250mm Platform (31 1/2" x 49 1/4") 75 1/ /4 89 3/4 95 1/ / / / /4 800 x 1000mm Platform ( 31 1/2" x 39 3/8") 73 7/8 77 1/2 81 3/8 85 1/2 90 1/8 95 1/ / /4 750 x 900mm Platform ( 29 1/2" x 35 1/2") 73 3/8 76 3/4 80 1/2 84 1/2 88 7/8 93 3/4 99 3/ /8 Dimension D - US Code for Overhead Clearance (1524mm (60") above Platform) 800 x 1250mm Platform (31 1/2" x 49 1/4") 72 5/8 77 1/ /4 92 7/ / / /8 800 x 1000mm Platform ( 31 1/2" x 39 3/8") /4 78 5/8 82 7/8 87 1/2 92 1/2 98 3/ / /8 750 x 900mm Platform ( 29 1/2" x 35 1/2") 70 1/8 73 1/2 77 1/ /8 89 3/ / /2 Dimension E - Canadian Code for Overhead Clearance (1500mm (59") above Centerline of Platform) 800 x 1250mm Platform (31 1/2" x 49 1/4") 67 1/2 69 7/8 72 3/8 75 1/8 78 3/ / / /8 800 x 1000mm Platform ( 31 1/2" x 39 3/8") 66 5/8 68 1/2 70 1/2 72 3/4 75 1/8 77 7/8 83 7/8 91 1/ /2 750 x 900mm Platform ( 29 1/2" x 35 1/2") /8 69 3/4 71 3/ /8 79 1/4 82 1/2 86 3/8 Note: Please consult the local Garaventa representative for local code requirements. *Platform folded up requires more overhead space than 1500mm (59 ) above centerline of platform numbers reflect platform requirement Xpress II Planning Guide Page 13 of H-DP

25 25mm (1 ) clearance 25mm (1 ) clearance C B Overhead Clearances required for platform folded up (without arms) Overhead Clearances required for platform folded up (with arms) 1524mm (60 ) D 1500mm (59 ) E Overhead Clearances to meet US Code Requirements (ASME A18.1b) 1524mm (60 ) overhead clearance required to any point above the platform deck. Refer to Dimension D in the chart on page 12 Note: Consult the local reprsentative for status of the new ASME A18.1b code requirements (some areas are exempt) Overhead Clearances to meet Canadian Code Requirements (CSA B ) 1500mm (59 ) overhead clearance required to centerline of the platform. Refer to Dimension E in chart on page 12 Xpress II Planning Guide Page 14 of H-DP

26 Wall Height Requirement for Direct Mounting *K dimension is to top of upper rail for placement of 2 x8 (if required). True wall height is dimension K plus 35 mm (1 3/8 ) M K L Stair Angle Dimension K - Min. Wall Height for Wall Mount 800 x 1250mm Platform (31 1/2" x 49 1/4") /2 35 3/8 38 3/8 41 7/8 45 3/4 50 1/4 55 1/ x 1000mm Platform (31 1/2" x 39 3/8") 29 1/8 31 1/4 33 5/8 36 1/ /4 46 1/8 50 5/8 56 1/8 750 x 900mm Platform (29 1/2" x 35 1/2") / / /8 43 3/ /8 Dimension L - Upper Rail Height 800 x 1250mm Platform (31 1/2" x 49 1/4") 28 5/8 31 1/ /2 44 3/8 48 7/8 54 1/8 60 5/8 800 x 1000mm Platform (31 1/2" x 39 3/8") 27 3/4 29 7/8 32 1/4 34 3/4 37 5/8 40 7/8 44 3/4 49 1/4 54 3/4 750 x 900mm Platform (29 1/2" x 35 1/2") 27 1/2 29 3/8 31 1/2 33 7/8 36 1/2 39 1/2 43 1/8 47 1/4 52 3/8 Dimension M - Lower Rail Height 800 x 1250mm Platform (31 1/2" x 49 1/4") 9 5/ /8 17 3/8 20 1/2 23 7/8 27 3/4 32 1/4 37 5/8 800 x 1000mm Platform (31 1/2" x 39 3/8") 8 3/4 10 3/4 12 7/8 15 1/8 17 5/8 20 3/8 23 5/8 27 1/4 31 3/4 750 x 900mm Platform (29 1/2" x 35 1/2") 8 1/2 10 1/4 12 1/8 14 1/4 16 1/ /8 29 1/2 Xpress II Loading Diagram 678mm (26.7 ) F1: 121 kg (center of gravity of conveyance) 1179 N (265 lbf) F2: 225 kg (max. loading capacity) 2207 N (495 lbf) d1: 362mm (15.5 ) d2: 678mm (26.7 ) Tower 362mm (15.5 ) Hanger Loading Calculations are based on a 1220 / 1250 platform Moment at center of tower M = Force (F) x distance (d) M = F1 x d1+f2 x d2 Maximum Moment M = knmm in.lbf F1 F2 178 C.G. of Capacity Load (7.0 ) Conveyance Platform Xpress II Planning Guide Page 15 of H-DP

27 Typical Wiring Layout Actual wiring and number of conductors may vary depending on options. Some of the options that will affect the wiring include: Emergency Stop switches (requires 2 additional conductors to each call station) Additional Audio Visual Alerts (requires 2 additional conductors to each A/V) Attendant Call (requires 2 additional conductors to each call station) The following options require field wiring by others: Fire Service Auxiliary Power System and possibly others DEDICATED CIRCUIT SUPPLIED BY OTHERS: VAC / 1 PHASE 50/60 Hz. Conduit and devices to suit local codes and recommended 16 amp (international) or 20 amp (North America) dedicated circuit Call Station *7 Conductors min. 20 AWG Audio Visual (Optional Item) Audio Visual 2 Conductors min. 20 AWG Lower Call Station Call Station *7 Conductors min 20 AWG Upper Call Station *Add 2 additional Conductors for Attendant Call (optional) & for Emergency Stop Button (optional) Xpress II Planning Guide Page 16 of H-DP

28 Technical Reference of Standard Features Platform Sizes: 800 x 1250mm (31 1/2 x 49 1/4 ) ADA compliant 800 x 1000mm (31 1/2 x 39 3/8 ) 750 x 900mm (29 1/2 x 35 1/2 ) 725 x 1000mm (28 1/2 x 39 3/8 ) optional 675 x 1000mm (26 1/2 x 39 3/8 ) optional Curved Safety Arms: Fully automatic, 32mm (1 1/4 ) diameter safety arms (optional) required in some jurisdictions for code compliance. Rated Load: 225 kg. (495 lbs.) Speed: Up: 4m (13ft) per minute, Down: 5m (16ft) per minute Operating Controls: Call Stations (Std): Constant pressure directional buttons, one touch fold & unfold buttons, 24VDC power, and keyed operation. Platform (Std): Constant pressure buttons, 24VDC power, Emergency Stop button (manual reset) and keyed operation. Drive System: Motor: 0.75 H.P. located on the platform Power Requirements: VAC, 50/60 HZ single phase on a dedicated circuit (North America: 20 ampere, Europe: 16 ampere). Power Transmission: Rack and pinion. Emergency Use: A hand wheel is provided. Auxiliary power system available. Over speed Safety: Mechanical over speed sensor and brake with electrical drive cut-out protection. Xpress II Planning Guide Page 17 of H-DP

29 Rail System: Champagne anodized aluminum extrusion with integrally mounted zinc plated gear. This lift is built in accordance to ASME A18.1, CSA B44.1/ ASME A17.5, CSA B355, ASME A17.1 A variety of optional features and custom modifications are available. For more information about custom features not included in the Xpress II Design and Planning Guide and code requirements for your area consult your local Garaventa representative or Garaventa Lift. Need Assistance Writing the Specification? Xpress II specifications will vary from one building site to another based on the stairway configuration, building materials, user requirements and local codes. Your Local Authorized Garaventa Dealer has the expertise to assist and develop an appropriate design specification for your accessibility project. Authorized Garaventa Dealers can be found Worldwide or or productinfo@garaventalift.com for the Dealership nearest you. In addition, professional designers at Garaventa Lift are available to answer your technical questions and to assist you with the design and specs. Xpress II Planning Guide Page 18 of H-DP

30 Xpress II Planning Guide Page 19 of H-DP

31 INSTALLATION OF A WHEELCHAIR LIFT AT THE MAIN LIBRARY Reference Number: A D D E N D U M NO. 1 The following shall form part of the tender documents issued by the City of Guelph s Purchasing Department, January NOTE: the acknowledgement of this addendum must be indicated on FT2 NOTE: The form of tender is set up to allow you to enter your prices and it will calculate the subtotals and the totals. DRAWINGS AND ANY RELATED INFORMATION The bidder shall verify that these Contract documents are complete and assume responsibility to view/download/print the drawings, specifications and any related information not sent with this document. You are required to go to the City s website where under the under the description of this contract you will find links to the drawings, specifications and any related information not sent with this document. Shortages shall be reported to the Project Manager immediately. It will be your responsibility to make sure that when you print any drawings/sketches/etc that they are printed to scale. DELETE the following drawing: A-110 Layout1.pdf ADD the following drawing: A-110 Layout1 - Revised.pdf DELETE from Specification on Page 1: 1.2 RELATED SECTIONS.5 Section Fire Alarm System: Building Fire Alarm Integration system to connect the lift control system with the building fire alarm system. 1

32 DELETE from Specification on Page 3: 1.9 WARRANTY.1 Warranty: Provide a two year limited warranty covering replacement of defective parts and excluding labour. Preventive maintenance agreement required..2 Extended Warranty: Provide an additional five year limited warranty covering replacement of defective parts and excluding labor for a total of seven years. Preventive maintenance agreement required MAINTENANCE SERVICE.1 Furnish service and maintenance for elevator system and components for the following period from Date of Substantial Completion..1 Five years ADD to Specification on Page 3: 1.9 WARRANTY.1 Warranty: Provide a one year limited warranty covering replacement of defective parts and excluding labour. Preventive maintenance agreement required MAINTENANCE SERVICE.1 Furnish service and maintenance for elevator system and components for the following period from Date of Substantial Completion..1 One year DELETE from Specification on Page 6: 2.1 STAIR LIFT FOR STRAIGHT STAIRWAYS (CONT D).12 Controls:.6 Platform equipped for: Keyless.14 Side Loading Platform: Provide with automatic folding ramps and kickplates at boarding sides of platform..16 Autofold Platform: Provide to automatically fold platform into storage position when left unused in open position at lower landing for field-adjustment period of 1 to 10 minutes. DELETE from Specification on Page 8: 2.2 STAIR LIFT FOR STRAIGHT STAIRWAYS (CONT D).5 Emergency Battery Operation: 2

33 .1 Auxiliary Power: Provide an external battery back-up system for normal up/down lift operation during a power failure for a minimum period of one hour with rated load..4 Call Stations:.5 Call stations shall be equipped for: Keyless Operation ARCHITECTURAL DRAWING Item 1.0 Reference Drawing A Revise scope of electrical work to read: G.C shall include cost in bid amount to provide power and connect to lift. Connect to closest available panel and provide all wire breakers and hardware. Conceal wiring where possible. Coordinate with Manufacturer and the Owner. 1.2 Revise wall mounted hand rail on stair (toward closets) as shown on Revised Drawing A Existing stair to remain. Remove as required to install vinyl non-slip nosing. Patch and make good finishes. 1.4 Refer to Drawing A-110 (Issued for Addendum) attached. 1.5 Provide shop drawings for Lift, Handrails, Stair nosing. Paint and wall base colour to be confirmed and approved by the Owner. QUESTIONS AND ANSWERS: Q1: Who applies for the building permit? A1: The City of Guelph has applied for the building permit. All other permits will need to be obtained by the contractor Q2: Does all of the wiring need to be concealed A2: The wiring for the call switches can be surface mounted on the concrete wall in which the lift will be installed. Wiring to run in painted, rigid conduit. Q3: Who is responsible for providing the electrical service to the unit? A3: The contractor is to provide the electrical service to the unit as per the Electrical Code which includes but not limited to a disconnect within 9m of the lift that disconnects the power and battery from the lift. End of Addendum #1. 3

34

Design Hot Line: or 1+(604)

Design Hot Line: or 1+(604) Xpress II Planning Guide Page I 15807-H-DP Table of contents Garaventa - the world s #1 choice for accessibility solutions....3 What is an Inclined Platform Lift?...4 Finishes...5 How it Works...5 Component

More information

Table of Contents. Introduction What is an Inclined Platform Lift? Why an Inclined Platform Lift? Finishes How it Works...

Table of Contents. Introduction What is an Inclined Platform Lift? Why an Inclined Platform Lift? Finishes How it Works... Stair-Lift Xpress II Model Table of Contents Introduction... 2 What is an Inclined Platform Lift?... 3 Table of Contents Why an Inclined Platform Lift?... 3 Finishes... 4 How it Works... 4 Component Identification...

More information

Creating An Accessible World XPRESS II. Inclined platform lift for straight stairways.

Creating An Accessible World XPRESS II. Inclined platform lift for straight stairways. Creating An Accessible World XPRESS II Design And Planning Guide Inclined platform lift for straight stairways www.garaventalift.com Please note: Dimensions provided in this Guide are for REFERENCE ONLY

More information

Design Hot Line: or 1+(604)

Design Hot Line: or 1+(604) Table of contents Garaventa - the world s #1 choice for accessibility solutions....3 What is an Inclined Platform Lift?...4 Finishes...5 How it Works...5 Component Identification...6 Standard Platform

More information

X3-R. Garaventa X3-R. Residential Inclined Wheelchair Lift. Design and Planning Guide

X3-R. Garaventa X3-R. Residential Inclined Wheelchair Lift.  Design and Planning Guide X3-R Residential Inclined Wheelchair Lift Garaventa X3-R Design and Planning Guide www.garaventa.ca Table of contents Garaventa - The world s #1 choice for accessibility solutions...2 What is an Inclined

More information

Table of Contents.

Table of Contents. Table of Contents Company Introduction...2 What is an Inclined Platform Lift?... 3 Why an Inclined Platform Lift?...3 Design Versatility... 4 Where You ll Find Our Lifts... 5 Finishes...6 How it Works...

More information

Creating An Accessible World. Inclined Platform Lift For Straight And Turning Stairways. Garaventa Wheelchair Lifts

Creating An Accessible World. Inclined Platform Lift For Straight And Turning Stairways. Garaventa Wheelchair Lifts Creating An Accessible World gsl ARTIRA Design And Planning Guide Inclined Platform Lift For Straight And Turning Stairways Garaventa Wheelchair Lifts Table of Contents Company Introduction...3 What is

More information

GENESIS OPAL PLANNING GUIDE. Unenclosed Platform Lift for commercial applications of up to 5 feet lifting height. Creating An Accessible World

GENESIS OPAL PLANNING GUIDE. Unenclosed Platform Lift for commercial applications of up to 5 feet lifting height. Creating An Accessible World GENESIS OPAL PLANNING GUIDE Creating An Accessible World Unenclosed Platform Lift for commercial applications of up to 5 feet lifting height Please note: Dimensions provided in this Guide are for REFERENCE

More information

OMEGA PLANNING GUIDE. Curved Inclined Platform Lift. Applicable Codes: ASME A17.1 ASME A18.1 CAN/CSA B355 CAN/CSA B m Part No.

OMEGA PLANNING GUIDE. Curved Inclined Platform Lift. Applicable Codes: ASME A17.1 ASME A18.1 CAN/CSA B355 CAN/CSA B m Part No. OMEGA Curved Inclined Platform Lift PLANNING GUIDE Applicable Codes: ASME A17.1 ASME A18.1 CAN/CSA B355 CAN/CSA B613 31-m07-2014 Part No. 000822 Copyright 2014 Savaria Corporation All rights reserved.

More information

DELTA PLANNING GUIDE. Straight Inclined Platform Lift. Applicable Codes: ASME A17.1 ASME A18.1 CAN/CSA B355 CAN/CSA B m Part No.

DELTA PLANNING GUIDE. Straight Inclined Platform Lift. Applicable Codes: ASME A17.1 ASME A18.1 CAN/CSA B355 CAN/CSA B m Part No. DELTA Straight Inclined Platform Lift PLANNING GUIDE Applicable Codes: ASME A17.1 ASME A18.1 CAN/CSA B355 CAN/CSA B613 10-m06-2013 Part No. 000817 Copyright 2013 Savaria Corporation All rights reserved.

More information

Creating An Accessible World. genesis SHAFTWAY. Shaftway vertical platform lift for lifting heights up to 14 feet.

Creating An Accessible World. genesis SHAFTWAY. Shaftway vertical platform lift for lifting heights up to 14 feet. Creating An Accessible World genesis SHAFTWAY Design And Planning Guide Shaftway vertical platform lift for lifting heights up to 14 feet www.garaventalift.com Please note: Dimensions provided in this

More information

Creating An Accessible World GENESIS SHAFTWAY PLANNING GUIDE. Shaftway vertical platform lift for lifting heights up to 14 feet.

Creating An Accessible World GENESIS SHAFTWAY PLANNING GUIDE. Shaftway vertical platform lift for lifting heights up to 14 feet. Creating An Accessible World GENESIS SHAFTWAY PLANNING GUIDE Shaftway vertical platform lift for lifting heights up to 14 feet www.garaventalift.com Please note: Dimensions provided in this Guide are for

More information

Creating An Accessible World GENESIS DESIGN AND PLANNING GUIDE. For lifting heights up to 14 feet.

Creating An Accessible World GENESIS DESIGN AND PLANNING GUIDE. For lifting heights up to 14 feet. Creating An Accessible World GENESIS DESIGN AND PLANNING GUIDE For lifting heights up to 14 feet www.garaventalift.com Table of Contents www.garaventalift.com Genesis Enclosure and Shaftway Model Table

More information

GENESIS ENCLOSURE PLANNING GUIDE. Vertical Platform Lift and Factory Enclosure for lifting heights up to 14 feet.

GENESIS ENCLOSURE PLANNING GUIDE. Vertical Platform Lift and Factory Enclosure for lifting heights up to 14 feet. Creating An Accessible World GENESIS ENCLOSURE PLANNING GUIDE Vertical Platform Lift and Factory Enclosure for lifting heights up to 14 feet www.garaventalift.com Please note: Dimensions provided in this

More information

Genesis Enclosure and Shaftway Model. Table of Contents

Genesis Enclosure and Shaftway Model. Table of Contents Genesis Enclosure Model Table of Contents www.garaventa.ca Genesis Enclosure and Shaftway Model Table of Contents Table of Contents Introduction... 2 What is a Vertical Platform Lift?... 3 Why a Vertical

More information

Creating An Accessible World. Vertical Platform Lift and Enclosure for lifting heights up to 14 feet.

Creating An Accessible World. Vertical Platform Lift and Enclosure for lifting heights up to 14 feet. Creating An Accessible World genesis ENCLOSURE Design And Planning Guide Vertical Platform Lift and Enclosure for lifting heights up to 14 feet www.garaventalift.com Please note: Dimensions provided in

More information

Creating An Accessible World. genesis. Enclosure or shaftway vertical platform lift for lifting heights up to 14 feet.

Creating An Accessible World. genesis. Enclosure or shaftway vertical platform lift for lifting heights up to 14 feet. Creating An Accessible World genesis Design And Planning Guide Enclosure or shaftway vertical platform lift for lifting heights up to 14 feet www.garaventalift.com Please note: Dimensions provided in this

More information

Creating An Accessible World ELVORON CPL.

Creating An Accessible World ELVORON CPL. Creating An Accessible World ELVORON CPL Design And Planning Guide www.garaventalift.com Please note: Dimensions provided in this Guide are for REFERENCE ONLY and should not be used for site preparation

More information

National Reach. Local Service.

National Reach. Local Service. National Reach. Local Service. Section 144216 VERTICAL WHEELCHAIR LIFTS PART 1 GENERAL 1.01 SECTION INCLUDES: A. UL Unenclosed. B. SL Shaftway. C. EL Enclosed. D. Hybrid (Elevator Style Lift). 1.02 RELATED

More information

Bruno VPL-3300B Series

Bruno VPL-3300B Series Bruno VPL-3300B Series Unenclosed Application - Design and Planning Guide MADE IN USA www.bruno.com Bruno VPL-3300B Series Unenclosed Application Design and Planning Guide Bruno VPL-3300B Series Unenclosed

More information

Bruno VPL-3300B Series

Bruno VPL-3300B Series Bruno VPL-3300B Series 3-Gate Application - Design and Planning Guide www.bruno.com Bruno VPL-3300B Series 3-Gate Application Design and Planning Guide Bruno VPL-3300B Series 3-Gate Application Table of

More information

Home Elevator. Planning Guide

Home Elevator. Planning Guide Home Elevator Planning Guide Please note: Dimensions provided in this Guide are for REFERENCE ONLY and should not be used for site preparation or construction. 2 Table of Contents Elvoron Home Elevator...4

More information

ELVORON HOME ELEVATOR

ELVORON HOME ELEVATOR Creating An Accessible World ELVORON HOME ELEVATOR PLANNING GUIDE www.garaventalift.com Please note: Dimensions provided in this Guide are for REFERENCE ONLY and should not be used for site preparation

More information

Stairfriend PLANNING GUIDE. Curved Stairlift. Applicable Codes: ASME A18.1 CAN/CSA B m Part No

Stairfriend PLANNING GUIDE. Curved Stairlift. Applicable Codes: ASME A18.1 CAN/CSA B m Part No Stairfriend Curved Stairlift PLANNING GUIDE Applicable Codes: ASME A18.1 CAN/CSA B613 19-m11-2013 Part No. 000967 Copyright 2013 Savaria Corporation All rights reserved. Printed in Canada Purpose of This

More information

Elvoron Home Elevator

Elvoron Home Elevator Creating An Accessible World Elvoron Home Elevator Design And Planning Guide www.garaventalift.com Please note: Dimensions provided in this Guide are for REFERENCE ONLY and should not be used for site

More information

Elvoron CPL. Planning Guide

Elvoron CPL. Planning Guide Elvoron PL Planning Guide Please note: Dimensions provided in this Guide are for reference only and should not be used for site preparation or construction. 2 Table of ontents Elvoron PL... 4 omponent

More information

Garaventa Genesis OPAL

Garaventa Genesis OPAL Garaventa Genesis OPAL Vertical Wheelchair Lift Owner s Manual 15102 Revision A Table of Contents TABLE OF CONTENTS Introduction... 1 OPAL Components... 3 Operating Instructions... 5 Platform Controls...

More information

SOLUTIONS AT EVERY LEVEL CURVED AND STRAIGHT STAIR LIFTS

SOLUTIONS AT EVERY LEVEL CURVED AND STRAIGHT STAIR LIFTS SOLUTIONS AT EVERY LEVEL CURVED AND STRAIGHT STAIR LIFTS HARMAR CONQUERS THE BARRIERS THAT STAIRS CREATE The stairs we take for granted most of our lives often become the primary reason that seniors or

More information

ES-125 Inclined Platform Lift OWNER S MANUAL

ES-125 Inclined Platform Lift OWNER S MANUAL ES-125 Inclined Platform Lift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000703 04-m07-2011 2 IMPORTANT Ensure that only an authorized Savaria Dealer

More information

Stannah Stairiser SR & Stairiser CR

Stannah Stairiser SR & Stairiser CR Stannah Stairiser SR & Stairiser CR www.stannahlifts.co.uk Our Stairiser inclined platform lifts are an ideal access solution if your building cannot accommodate a vertical lift, carrying one person safely

More information

SOLUTIONS AT EVERY LEVEL CURVED AND STRAIGHT STAIR LIFTS

SOLUTIONS AT EVERY LEVEL CURVED AND STRAIGHT STAIR LIFTS SOLUTIONS AT EVERY LEVEL CURVED AND STRAIGHT STAIR LIFTS HARMAR CONQUERS THE BARRIERS THAT STAIRS CREATE. The stairs we take for granted most of our lives often become the primary reason that seniors or

More information

ELVORON HR DESIGN AND PLANNING GUIDE

ELVORON HR DESIGN AND PLANNING GUIDE ELVORON HR DESIGN AND PLANNING GUIDE Hydraulic Home Elevator Quality Elevators by Garaventa www.garaventaelevator.com Table of Contents Elvoron HR - Hydraulic Residential Elevator... 2 Technical Reference:...

More information

Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information

Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information Your new Highlander Vertical Platform Lift has been engineered to provide you with safe and convenient access to your

More information

Stairiser SR & CR. Inclined platform lifts.

Stairiser SR & CR. Inclined platform lifts. Our Stairiser inclined platform lifts are an ideal access solution if your building cannot accommodate a vertical lift, carrying one person safely over a straight or curved stairway, seated in a wheelchair

More information

Telecab Planning Guide

Telecab Planning Guide Telecab Planning Guide Dec. 2005 Company intro Savaria Concord Lifts is now the second largest accessibility company in North America. Savaria was founded in 1979, and has acquired Concord Elevator Inc.

More information

Garaventa EVACU-TRAC CD7. Owner s Manual

Garaventa EVACU-TRAC CD7. Owner s Manual Garaventa EVACU-TRAC CD7 Emergency Evacuation Chair Owner s Manual Item No. 12440 Rev E Printed in Canada Evacu-Trac CD7 OWNER S MANUAL Table of Contents 1. Safety First Page 3 2. Terminology Page 4 3.

More information

Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information

Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information IMPORTANT: Read and understand this entire Owner s Manual before attempting to operate this Stair Lift. If you do not

More information

DRIVE: 1 hp motor; 1750 rpm, single phase, 120 VAC, 60 Hz, 13.4 Full Load Amps, 1.15 service factor, continuous duty

DRIVE: 1 hp motor; 1750 rpm, single phase, 120 VAC, 60 Hz, 13.4 Full Load Amps, 1.15 service factor, continuous duty Residential Vertical Platform Lift Technical Specifications rev: 4/02/2008 ISO No. 404.96 MODEL NUMBER: Series, Model VPL-3153 & VPL-3175 U.S. F.D.A. CLASSIFICATION: Class II CLASSIFICATION NUMBER: 890.3930

More information

Raising Standards in Accessibility

Raising Standards in Accessibility Raising Standards in Accessibility HIGHLanDer VERTICAL PLatform Lifts Comprehensive Line of Vertical Lifts for Levels up to 14 Feet. Harmar is the leading manufacturer of innovative accessibility solutions,

More information

VPL-SH1 Vertical Platform Lift

VPL-SH1 Vertical Platform Lift VPL-SH1 Vertical Platform Lift SH1-28 SH1-52 SH1-72 SH1-105 www.serenityhcp.com Page 1 of 27 Standard_Vertical_Lift_Rev 7 Table of Contents Site Preparation and Electrical Guidelines..... 3 Specifications...

More information

Supra and Supra Linea Platform Lifts

Supra and Supra Linea Platform Lifts 2 Access BDD Supra and Supra Linea Platform Lifts FOR STRAIGHT AND CURVED STAIRCASES Our Inclined Platform Lifts are manufactured to meet the needs of customers who demand the best comfort and quality.

More information

SL-1000 Stairlift OWNER S MANUAL

SL-1000 Stairlift OWNER S MANUAL SL-1000 Stairlift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000729 03-m12-2013 2 IMPORTANT Ensure that only an authorized Savaria Dealer installs

More information

Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information

Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information Residential Platform Lifts RPL400 / RPL600 Owner s Manual and Warranty Information IMPORTANT: Read and understand this entire Owner s Manual before attempting to operate this Stair Lift. If you do not

More information

Home Elevator. Specifically engineered for residential applications

Home Elevator. Specifically engineered for residential applications Home Elevator Specifically engineered for residential applications HOME ELEVATOR Why a residential elevator? 2 4 3 1 Simplify Daily Routines 1 Reduce heavy lifting when transporting storage, laundry or

More information

The Omega Platform Lift

The Omega Platform Lift This information manual aims at providing a quick overview over the diverse application possibilities that the Omega platform lift provides. In over 4000 installations worldwide, the Omega has proven to

More information

Supra and Supra Linea Platform Lifts

Supra and Supra Linea Platform Lifts Supra and Supra Linea Platform Lifts FOR STRAIGHT AND CURVED STAIRCASES Access BDD are one of Europe s leading suppliers of stairlifts, platform lifts and home lift solutions. Supra and Supra Linea Platform

More information

Stairfriend Stairlift Owner s Manual

Stairfriend Stairlift Owner s Manual Stairfriend Stairlift Owner s Manual (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000914 24-m04-2014 2 IMPORTANT Ensure that only an authorized Savaria Dealer installs

More information

Raising Standards in Accessibility HIG H L A N D E R VERTIC A L P L A TFORM LIFTS

Raising Standards in Accessibility HIG H L A N D E R VERTIC A L P L A TFORM LIFTS Raising Standards in Accessibility HIG H L A N D E R VERTIC A L P L A TFORM LIFTS COMPREHENSIVE LINE OF V ERTIC A L LIFTS FOR LEVEL S UP TO 14 F EET. Harmar is the leading manufacturer of innovative accessibility

More information

Stairfriend Stairlift Owner s Manual

Stairfriend Stairlift Owner s Manual Stairfriend Stairlift Owner s Manual (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000914 03-m12-2013 2 IMPORTANT Ensure that only an authorized Savaria Dealer installs

More information

Planning Guide. ThyssenKrupp. ThyssenKrupp Access Residential Elevator Division. for Residential Elevators ASME A17.1, Part V, Section 5.

Planning Guide. ThyssenKrupp. ThyssenKrupp Access Residential Elevator Division. for Residential Elevators ASME A17.1, Part V, Section 5. Planning Guide for Residential Elevators ASME A17.1, Part V, Section 5.3 August 1, 2008 ThyssenKrupp Access Residential Elevator Division ThyssenKrupp Introduction This Planning Guide is designed to assist

More information

V1504 Vertical Platform Lift OWNER S MANUAL

V1504 Vertical Platform Lift OWNER S MANUAL V1504 Vertical Platform Lift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000692 30-m06-2017 2 IMPORTANT Ensure that only an authorized Savaria Dealer

More information

IL500 Sierra Inclined Platform Lift

IL500 Sierra Inclined Platform Lift IL500 Sierra Inclined Platform Lift Installation & Service Manual www.harmar.com 800-833-0478 IMPORTANT: Read and understand this manual thoroughly before attempting to install or operate the lift. If

More information

Inclined platform lifts RPsp/Supra Product presentation

Inclined platform lifts RPsp/Supra Product presentation Inclined platform lifts RPsp/Supra Table of contents RPsp Key technical data Supra Key technical data Benefits Main components and options Reference installations 2 RPsp Key technical data 3 Automatic

More information

Staying in their own homes as they age is important to nearly all adults 50 + *

Staying in their own homes as they age is important to nearly all adults 50 + * STRAIGHT STAIR LIFTS Stairlifts Inclined Platform Lifts Vertical Platform Lifts Elevators Staying in their own homes as they age is important to nearly all adults 50 + * More than ever before, customers

More information

A. This Section includes the following types of sectional overhead doors:

A. This Section includes the following types of sectional overhead doors: SECTION 08361 - SECTIONAL OVERHEAD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

AlumaView AV200. A. Section Metal Fabrications: Miscellaneous for steel supports.

AlumaView AV200. A. Section Metal Fabrications: Miscellaneous for steel supports. AlumaView AV200 PART 1 GENERAL 1.1 SECTION INCLUDES A. Commercial sectional doors. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Miscellaneous for steel supports. B. Section 08710 - Door

More information

USER HANDBOOK. ALPHA Stairlift

USER HANDBOOK. ALPHA Stairlift USER HANDBOOK ALPHA Stairlift Table of contents: Introduction... 3 Installation schematic... 4 Technical parameters... 5 Seat function overview... 6 Controls... 7 Starting up the chairlift... 8 Sending

More information

SECTION METAL ATHLETIC SPORT LOCKERS

SECTION METAL ATHLETIC SPORT LOCKERS SECTION 10 50 13 - METAL ATHLETIC SPORT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified

More information

DORMA Automatics, Inc. 924 Sherwood Drive Lake Bluff, Illinois U.S.A. Toll Free: Fax:

DORMA Automatics, Inc. 924 Sherwood Drive Lake Bluff, Illinois U.S.A. Toll Free: Fax: ARCHITECTURAL SPECIFICATION ED-700 SECTION 08460 Automatic Entrance Doors DORMA Automatics, Inc. Series ED-700 (Surface Applied) LOW ENERGY OPERATING SYSTEM FOR SWINGING DOORS 1.01 SUMMARY: A. Section

More information

SL-1000 Stairlift OWNER S MANUAL

SL-1000 Stairlift OWNER S MANUAL SL-1000 Stairlift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000729 06-m01-2011 2 IMPORTANT Ensure that only an authorized Savaria Dealer installs

More information

SECTION LIFT ARM PARKING GATES

SECTION LIFT ARM PARKING GATES St. Anthony of Padua Catholic Church Phase I The Woodlands, Texas JRA Proj. No. 15004 Issued for Bidding - 1/20/2016 SECTION 11 12 33.13 LIFT ARM PARKING GATES PART 1 - GENERAL 1.01 SUMMARY A. Section

More information

9900 SERIES SECTION LECTURE ROOM SEATING & TABLET ARM SPECIFICATIONS

9900 SERIES SECTION LECTURE ROOM SEATING & TABLET ARM SPECIFICATIONS Clarin by Hussey: Lecture Room Seating 9900 SERIES SECTION 12560 LECTURE ROOM SEATING & TABLET ARM SPECIFICATIONS PART 1 GENERAL 1.01 SUMMARY A. Section includes: Lecture room seating and tablet arm systems.

More information

SECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS

SECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS SECTION 221123.13 - DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Dock Equipment $ The RIGHT choice for:

Dock Equipment $ The RIGHT choice for: The RIGHT choice for: + RIGHT PRODUCT! 40,000+ quality products from leading manufacturers + RIGHT QUALITY! 3+ year guarantee + RIGHT ON TIME! 1 3 day delivery of in-stock products Dock Equipment 8 Dock

More information

Design Guidelines and Standards Manual University of Cincinnati

Design Guidelines and Standards Manual University of Cincinnati SECTION 08710D - A. SPECIFICATIONS FORMAT 1. It is preferred that this section include all items of door hardware. Window hardware and operators should be specified in the window section. This approach

More information

HERCULES II DC OWNER S MANUAL HERCULES II DC RESIDENTIAL & COMMERCIAL

HERCULES II DC OWNER S MANUAL HERCULES II DC RESIDENTIAL & COMMERCIAL HERCULES II DC OWNER S MANUAL Please read this Owner s Manual carefully before using your Hercules II Vertical Platform Lift to ensure safe and correct operation. Keep this manual in a safe place for future

More information

hercules Commercial CPL400 CPL600 CPL800 CPL1000 CPL1200 CPL1400 INSTALLATION & OWNER S MANUAL Commercial Vertical Platform Lifts

hercules Commercial CPL400 CPL600 CPL800 CPL1000 CPL1200 CPL1400 INSTALLATION & OWNER S MANUAL Commercial Vertical Platform Lifts AmeriGlide Commercial INSTALLATION & OWNER S MANUAL hercules Commercial Vertical Platform Lifts CPL400 CPL600 CPL800 CPL1000 CPL1200 CPL1400 This manual has been provided to assist you with lift installation

More information

Garaventa Power Evacu-Trac

Garaventa Power Evacu-Trac Garaventa Power Evacu-Trac Emergency Evacuation Chair Owner s Manual Item No. 21102-A-OM Power Evacu-Trac OWNER S MANUAL Table of Contents 1. Safety First Page 4 2. Terminology Page 5 3. Operating Instructions

More information

QUALITY AT EVERY LEVEL STRAIGHT STAIR LIFTS

QUALITY AT EVERY LEVEL STRAIGHT STAIR LIFTS QUALITY AT EVERY LEVEL STRAIGHT STAIR LIFTS CUSTOMERS WANT SOLUTIONS AT HOME. HARMAR DELIVERS. More than ever, the market for accessibility solutions is booming literally. The first wave of Baby Boomers

More information

AUTOMATIC ENTRANCES SLIDING GILDOR, INC. SECTION [08460] MODEL SLM SERIES TYPE COM

AUTOMATIC ENTRANCES SLIDING GILDOR, INC. SECTION [08460] MODEL SLM SERIES TYPE COM PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following types of automatic entrance doors: 1. Exterior and interior, bi-parting, sliding automatic entrance doors. B. Related Sections: 1. Section

More information

SECTION ENCLOSED SWITCHES AND CIRCUIT BREAKERS

SECTION ENCLOSED SWITCHES AND CIRCUIT BREAKERS SECTION 26 28 16 ENCLOSED SWITCHES AND PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following individually mounted, enclosed switches and circuit breakers rated 600V AC and less: 1. Fusible switches.

More information

EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES

EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM BALANCED DOORS AND ENTRANCES PART 1 GENERAL 1.1 DESCRIPTION A. Work included: Entrance and vestibule

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Door Openings 85 to 0 or to 80 Adjustable Arm and Slide Track Application Maximum Hinge Side Frame Reveal to /8 (mm) Hinge (Pull) Side of Door Installation 5700 LEO

More information

Quality Elevators by Garaventa ELVORON HR. Hydraulic Residential Elevator

Quality Elevators by Garaventa ELVORON HR. Hydraulic Residential Elevator Quality Elevators by Garaventa ELVORON HR Hydraulic Residential Elevator The Elvoron HR - Hydraulic Residential Elevator Once considered a luxury, residential elevators are now in common use in both newly

More information

SECTION [ ] HIGH PERFORMANCE OVERHEAD HIGH SPEED DOORS. Display hidden notes to specifier. (Don't know how?

SECTION [ ] HIGH PERFORMANCE OVERHEAD HIGH SPEED DOORS. Display hidden notes to specifier. (Don't know how? SECTION 08337 [08 33 23.13] HIGH PERFORMANCE OVERHEAD HIGH SPEED DOORS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2016 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1

More information

Inclined Platform Lifts SUPRA & SUPRA LINEA

Inclined Platform Lifts SUPRA & SUPRA LINEA Inclined Platform Lifts SUPRA & SUPRA LINEA SUPRA LINEA - for straight stairs Supra Linea can undoubtedly be considered the pinnacle of our extensive experience in inclined platform lifts. Soft colours,

More information

A. This Section includes ac, enclosed controllers rated 600 V and less, of the following types:

A. This Section includes ac, enclosed controllers rated 600 V and less, of the following types: SECTION 262913 600 VOLT ENCLOSED CONTROLLERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 0 Specification

More information

Operator s Manual. Excel Stairway Lift System Project 1 for Thalia Almeida. Team 2 Samir Dahmani, Nihit Mody, Joseph Wolanski

Operator s Manual. Excel Stairway Lift System Project 1 for Thalia Almeida. Team 2 Samir Dahmani, Nihit Mody, Joseph Wolanski Operator s Manual Excel Stairway Lift System Project 1 for Thalia Almeida Team 2 Samir Dahmani, Nihit Mody, Joseph Wolanski Client: Heidi Almeida 32 Parkwood Rd. Waterbury, CT. U.S.A. Mobile: (203) 910-6543

More information

Essential. Stairlift USERS MANUAL

Essential. Stairlift USERS MANUAL Essential Stairlift USERS MANUAL 2 IMPORTANT Ensure that only an authorized Dealer installs and services the tairlift. Under no circumstances is anyone other than a dealer with training and authorization

More information

SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.

SECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines. Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.

More information

SECTION ELECTRIC HAND DRYERS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION ELECTRIC HAND DRYERS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 10811 ELECTRIC HAND DRYERS PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Electric hand dryers. 1.2 RELATED SECTIONS A. Section 06100 - Rough

More information

SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.

SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines. SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.

More information

Stairlift OWNER S MANUAL

Stairlift OWNER S MANUAL K2 Stairlift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 001022 31-m10-2017 2 IMPORTANT Ensure that only an authorized Savaria Dealer installs and

More information

ALVARADO (1029 mm) 25 (635 mm) 36.5 (927.1 mm)

ALVARADO (1029 mm) 25 (635 mm) 36.5 (927.1 mm) ALVARADO EDCX Bullnose Waist High Turnstile Technical Specifications Dimensions Unit Height: Unit Width: Unit Depth: 40.5 (1029 mm) 25 (635 mm) 36.5 (927.1 mm) Materials Cabinet: Formed and welded 14 gauge

More information

Installation and Service Manual

Installation and Service Manual RESIDENTIAL PLATFORM LIFTS RPL400 / RPL600 Installation and Service Manual WARNING! STRICT ADHERENCE TO THESE INSTALLATION INSTRUCTIONS IS REQUIRED to promote the safety of those installing this product,

More information

91 (2311 mm) (1581mm) (1375 mm)

91 (2311 mm) (1581mm) (1375 mm) ALVARADO MSTX Maximum Security Turnstile Technical Specifications Dimensions Unit Height: Unit Width: Unit Depth: 91 (2311 mm) 62.25 (1581mm) 54.125 (1375 mm) Materials Yoke: (Curved Section) Yoke Guard

More information

Installation Manual DELT. Platform stairlift. Web: Tel: Mobile:

Installation Manual DELT. Platform stairlift. Web:   Tel: Mobile: Installation Manual DELT Platform stairlift Web: www.lehner-lifttechnik.at Tel: +4372783514 Email: office@lehnerlifttechnik.at Mobile: +436641612980 Table of content OBSERVE THE FOLLOWING POINTS BEFORE

More information

Design Guide ASME A18.1

Design Guide ASME A18.1 Vertical Lift (VPL) Design Guide ASME A18.1 For Models: VPL-UL (Unenclosed Lift) VPL-EL (Enclosure Lift) VPL-ELP (Plexiglass Enclosure Lift) VPL-SL (Shaftway Lift) VPL-RL (Residential Lift) symmetryelevator.com

More information

B.07 Stairlift OWNER S MANUAL

B.07 Stairlift OWNER S MANUAL B.07 Stairlift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000659 12-m07-2010 2 IMPORTANT Ensure that only an authorized Savaria Dealer installs and

More information

EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES

EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES WIKK INDUSTRIES, INC. MasterFormat 95 SECTION 08480 MasterFormat 04 SECTION 08 42 36 EXTRUDED ALUMINUM TEMPERED GLASS BALANCED DOORS AND ENTRANCES PART I GENERAL 1.1 DESCRIPTION A. Work included: Entrance

More information

Michigan State University Construction Standards SECONDARY UNIT SUBSTATIONS PAGE

Michigan State University Construction Standards SECONDARY UNIT SUBSTATIONS PAGE PAGE 261116-1 SECTION 261116 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

lift design solution SCREW DRIVEN LOW SPEED LIFT FROM NTD LIFTS

lift design solution SCREW DRIVEN LOW SPEED LIFT FROM NTD LIFTS lift design solution SCREW DRIVEN LOW SPEED LIFT FROM LIFTS a lift that BLENDS IN Lifts is a leading developer and supplier of low speed lifts. The product range includes a wide selection of models including

More information

HIGHLANDER Residential Platform Lift

HIGHLANDER Residential Platform Lift HIGHLANDER Residential Platform Lift RPL400 RPL600 This manual has been provided to assist you with lift installation and operation. For further assistance please contact your authorized Harmar dealer

More information

(1032 mm) 30.5 (775 mm) 44 ( mm)

(1032 mm) 30.5 (775 mm) 44 ( mm) ALVARADO EDCX-EK Waist High Turnstile Technical Specifications Dimensions Unit Height: Unit Width: Unit Depth: 40.625 (1032 mm) 30.5 (775 mm) 44 (1117.6 mm) Materials Cabinet: Formed and welded 14 gauge

More information

5. Contractor Information 3M Model 2300 Series System Layout Checklist

5. Contractor Information 3M Model 2300 Series System Layout Checklist 5. Contractor Information 3M Model 2300 Series System Layout Checklist This checklist contains the information necessary to provide the environment required to successfully install your new Model 2300

More information

SECTION HIGH PERFORMANCE OVERHEAD COILING DOORS

SECTION HIGH PERFORMANCE OVERHEAD COILING DOORS SECTION 08 33 23.13 HIGH PERFORMANCE OVERHEAD COILING DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

More information

SECTION RAPIDVIEW MODEL 999. Copyright ARCAT, Inc. All rights reserved

SECTION RAPIDVIEW MODEL 999. Copyright ARCAT, Inc. All rights reserved SECTION 08 33 23.13 HIGH PERFORMANCE OVERHEAD HIGH SPEED DOORS RAPIDVIEW MODEL 999 Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2016 2018 ARCAT, Inc. All rights reserved **

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Openings 85 to 0 or to 70 Double Lever Arm Application for Frame Reveals (76) to 7 (78mm)* Stop (Push) Side of Installation 5700 LEO Operator Installation Instructions

More information

SECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS

SECTION DOMESTIC-WATER PACKAGED BOOSTER PUMPS SECTION 22 1123.13 DOMESTIC-WATER PACKAGED BOOSTER PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

V64-V65 PLATFORM STAIRLIFTS

V64-V65 PLATFORM STAIRLIFTS V64-V65 PLATFORM STAIRLIFTS EASY TO USE COMFORTABLE & SAFE FAST DELIVERY The platform stairlifts This range of platform stairlifts provides safe access to all public and private premises. Thanks to the

More information