Emergency lighting units EM Inverter
|
|
- Norman Shaw
- 6 years ago
- Views:
Transcription
1 T, 0 0 V 0/0 Hz BASIC version Product description Emergency lighting supply unit for manual testing For T fluorescent lamps ow-profile casing ( x 0 mm cross-section) -year guarantee Properties or h rated duration Selectable operating time (jumper) Compatible with all electronic ballasts (dimmable and nondimmable) -pole technology: -pole lamp changeover and delayed power switching for the ballast High-frequency ac operation of the lamp Gentle on the lamp thanks to permanent cathode heating in emergency mode mode function Green charge status display Electronically controlled battery charging Deep discharge protection Short-circuit-proof battery connection Polarity reversal protection for battery (not reversible) Batteries High-temperature cells icd or imh batteries D, Cs or A cells Blade terminals for simple connection -year design life -year guarantee For battery compatibility refer to chapter Ballast-umen-Factor (BF) È Standards, page Wiring diagrams and installation examples, page
2 , 0 0 V 0/0 Hz BASIC version Technical data Rated supply voltage 0 0 V Mains frequency 0 / 0 Hz Mains current h ma Mains current h ma Rated power < W Overvoltage protection 0 V (for h) Maximum operating voltage (U-OUT of the ECG) 0 V charging time h Discharge current. A Charge current h 00 ma Charge current h 00 ma eakage current (PE) < 0. ma Ambient temperature ta... 0 C Max. casing temperature tc 0 C Mains voltage changeover threshold according to E 09-- Min. lamp starting temperature (emergency mode) C of protection IP0 mode max. number of emergency units 00 mode max. wiring distance,000 m Ordering data Article number umber of cells carton pallet Weight per pc. Rated operating time / h EM /- 999 pc(s). pc(s). 0.9 kg EM //9-999 pc(s). pc(s). 0.9 kg EM pc(s). pc(s). 0.9 kg EM pc(s). pc(s). 0.9 kg EM /0-999 pc(s). pc(s). 0.9 kg Remove short-circuit connector and select the correct battery to switch to -hour operation. EM = Emergency
3 ACCESSO- RIES switch EM Product description For connection to the emergency lighting unit For checking the device function Ordering data Article number bag carton Weight per pc. switch EM 90 pc(s). 00 pc(s). 0.0 kg ACCESSO- RIES Status indication green Product description A green indicates that charging current is flowing into the battery Ordering data Article number bag carton Weight per pc. EM green 9990 pc(s). 00 pc(s). 0.0 kg EM green, ultra high brightness 999 pc(s). 00 pc(s). 0.0 kg
4 Ballast lumen factor (BF) in % for T fluorescent lamps, or h h or h cells cells cells EM /- EM //9- EM 9- EM - EM /0- Article no amp type Wattage BF in emergency lighting mode in % for rated operating time T FH W W W T FQ W W 9 W 9 W W. 0 W. Technology and capacity Design umber of cells Articlenumber Stick Accu-iCd C A 9999 Side by side Accu-iCd C B 9999 Stick Stick Accu-iCd C C 9999 Assignable batteries icd. Ah Cs cells Stick Accu-iCd C A 9999 Side by side Accu-iCd C B 9999 Stick Stick Accu-iCd C C 9999 Stick Accu-iCd C A 9999 Stick Stick Accu-iCd C C Stick Accu-iCd A Side by side Accu-iCd B 900 icd Ah D cells Stick Stick Accu-iCd C 999 Stick Accu-iCd A 999 Stick Stick Accu-iCd C Stick Stick Accu-iCd C 900 Stick Accu-iMH A 0009 imh. Ah Cs cells Stick Accu-iMH A Stick Accu-iMH A 0009 imh Ah A cells Stick Stick Accu-iMH C 0009 Stick Accu-iMH Ah A CO 900 Stick Stick Accu-iMH Ah C CO 900 Stick Stick Accu-iMH Ah C CO 9009 Stick Stick Accu-iMH Ah C CO 9000 For -hour operation: Ah D-cells icd or Ah Cs-cells imh. For -hour operation:. Ah Cs-cells icd or Ah Cs-cells imh.
5 Standards acc. to E 0 acc. to E 09-- E -- E 099 E 0 Isolation and electric strength testing of luminaires Electronic devices can be damaged by high voltage. This has to be considered during the routine testing of the luminaires in production. According to IEC 09- Annex Q (informative only!) or EEC 0-Annex A, each luminaire should be submitted to an isolation test with 00 VDC for second. This test voltage should be connected between the interconnected phase and neutral terminals and the earth terminal. The isolation resistance must be at least MΩ. As an alternative, IEC 09- Annex Q describes a test of the electrical strength with,00 VAC (or, x,00 VDC). To avoid damage to the electronic devices this test must not be conducted. Technical data batteries Accu-iCd. Ah. V Cs to ensure years design life C to 0 C Max. short term temperature (reduced life-time) 0 C cycles per year plus cycles during months. /. Ah. V D to ensure years design life C to C Max. short term temperature (reduced life-time) 0 C cycles per year plus cycles during months Accu-iMH E E E E 00-- E E Ah. V Cs to ensure years design life C to 0 C Max. short term temperature (reduced life-time) 0 C cycles per year plus 0 cycles during months.0 Ah. V A to ensure years design life C to 0 C Max. short term temperature (reduced life-time) 0 C cycles per year plus 0 cycles during months For further informations refer to corresponding battery datasheet. Storage, installation and commissioning Relevant information about storage conditions, installation and commissioning are provided in the battery datasheets. Ballast compatibility The emergency units use pole technology and are compatible with most high frequency ballasts on the market, however it is important to check that the U-OUT rating of the ballast does not exceed the value specified under Technical data. Mechanical details Channel manufactured from galvanised steel. Cover manufactured from white pre-coated steel. status indicator Green Mounting hole. mm dia ead length 0 mm Insulation rating: 90 C switch Mounting hole.0 mm dia ead length 0 mm leads Quantity: red and black ength: 00 mm Wire type: 0. mm solid conductor Insulation rating: 90 C end termination Push on. mm receptacle to suit battery spade fitted with insulating cover Module end termination.0 mm stripped insulation Two-piece batteries are supplied with a 00 mm lead with. mm receptacle at each end and insulting covers to connect the separate sticks together. mode mode can be initiated by applying a short pulse of between 9. VDC and. VDC in amplitude for a period of between 00 ms and.0 second. This should be applied to terminals marked after the mains supply has been disconnected and whilst the module is in emergency operation. A mains reset is required to exit the rest mode. The terminals are sensitive to polarity. ife-time Average life-time 0,000 hours under rated conditions with a failure rate of less than 0 %. Average failure rate of 0. % per 000 operating hours.
6 Electrical connections An earthed starting aid is recommended. The module should be earthed by the fixings used to attach it to the luminaire. Wiring amp/ballast/supply wire preparation: mm² IDC interface solid wire with a cross section of 0. mm² according to the specification from WAGO Horizontal interface solid wire with a cross section of 0.0. mm² according to the specification from WAGO solid wire with a cross section of.0 mm² with an insulation diameter up to. mm strip 9 mm of insulation from the cables loosen wire through twisting and pulling 9 mm Batteries// switch push terminal with button release: 0. mm². mm strip Maximum lamp lead capacitance terminals and (* hot leads) 00 pf ) terminals and 00 pf ) oosen wire through twisting and pulling ) ote: care should be taken not to exceed the total maximum lamp lead capacitance for HF ballast. eads should always be kept as short as possible. Batteries Connection method:. x 0. mm spade tag welded to end of cell. For stick packs this connection is accessible after the battery caps have been fitted. To inhibit inverter operation disconnect the batteries by removing the connector from the battery spade tag. For battery data see separate data sheet. Wiring guidelines To ensure that a luminaire containing high frequency emergency units complies with E 0 for radio frequency conducted interference in both normal and emergency mode it is essential to follow good practice in the wiring layout. Within the luminaire the switched and unswitched 0 Hz supply wiring must be routed as short as possible and be kept as far away as possible from the lamp leads. This means, for example, in a linear T or T luminaire the mains wiring should be routed along one side of the luminaire body, while the wires to the emergency lamp from the emergency module are routed along the other side. The high frequency emergency lamp wiring contains hot leads at pins and, which have high voltage to earth. These should be kept as short as possible and separated from other wiring to minimize coupling. They also have a restriction on capacitance to other wiring and earth of 00 pf, which must be observed to ensure good lamp starting. With an earth connection of the metal case of the emergency module the noise suppression can be further improved. The wiring of the earth should be kept as short as possible. Through wiring may affect the emc performance of the luminaire. With the use of the fifth pole possible compatibility problems between the products can be prevented. Depending on the luminaire wiring the radio suppression in the emergency mode of operation can be further improved. Capacitive loading limits of lamp leads must not be exceeded. ote the capacitance of the emergency lamp leads adds to the capacitance of the leads from the ballast to the module when considering ballast loading. To avoid the damage of the control gear, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver, etc.).
7 emergency module wiring diagrams ot for use with magnetic ballasts and switch start circuits ed line out to ballast ine in from switch eutral positive negative out in EMERGECY MODUE ed line out to ballast ine in from switch eutral positive negative out in EMERGECY MODUE orange () pink () orange () pink () eutral to ballast eutral to ballast HF BAAST U-OUT max. 0 V HF BAAST U-OUT max. 0 V amp Wiring diagram for single lamp high frequency ballasts Wiring diagram for twin lamp high frequency ballasts with terminals. ed line out to ballast ine in from switch eutral positive negative out in EMERGECY MODUE ed line out to ballast ine in from switch eutral positive negative out in EMERGECY MODUE orange () pink () orange () pink () * hot leads eutral to ballast eutral to ballast HF BAAST U-OUT max. 0 V HF Ballast U-OUT max. 0 V amp amp Wiring diagram for twin lamp high frequency ballasts with terminals Wiring diagram for twin lamp high frequency ballasts with terminals o connection to be made eutral positive negative out in EMERGECY MODUE ote: All hot leads normally marked with an * should be kept as short as possible. For comprehensive wiring diagrams and instructions consult the Tridonic website orange () pink () Batteries Wiring diagram for non-maintained operation Additional information Additional technical information at Technical Data Guarantee conditions at Services ife-time declarations are informative and represent no warranty claim. o warranty if device was opened.
Emergency lighting units EM series. EM BASIC lp-2, V BASIC version. Technical data. Ordering data. Article number
Product description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps ow-profile casing ( x 0 mm cross-section) Properties or h rated duration Compatible with all
More informationEmergency lighting units EM series. EM PRO EZ-3, V PRO version
T T TC-DE TC-SE TC-TE TC-F TC- TC-DD Tc EM, 0 40 V PRO version Product description Emergency lighting supply unit with DAI interface and automatic test function For linear and compact fluorescent lamps
More informationEmergency lighting units EM Inverter. EM SELFTEST G2, V SELFTEST version
T5 T8 TC- TC-F DE TC- TC-SE TC-TE TC-DD T5c EM SEFTE, 220 240 V SEFTEST version Product description Emergency lighting supply unit with self-test function For linear and compact fluorescent lamps ow-profile
More informationEmergency lighting units EM INVERTER
T T8 TC- TC-F DE TC- TC-SE TC-TE TC-DD Tc EM, 0 40 V 0/0 Hz PRO version Product description Emergency lighting supply unit with DAI interface and automatic test function For linear and compact fluorescent
More informationEmergency lighting units EM converterled. EM converterled BASIC 50 V BASIC series
BASIC 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output voltage < 60 V DC ow profile
More informationEmergency lighting units EM converterled. EM converterled BASIC 90 V BASIC series
BASIC 90 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC ow profile
More informationEmergency lighting units EM converterled. EM converterled BASIC 200 V BASIC series
EM converter EM converter BASIC 200 V BASIC series Product description lighting Driver for manual testing For modules with a forward voltage of 50 200 V ow profile casing (21 x 30 mm cross-section) For
More informationEmergency lighting units EM converterled
EM converter EM converter BASIC icd/imh 250 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 50 250 V ow
More informationEmergency lighting units EM INVERTER
T5 T8 TC-DEL TC-SEL TC-TEL TC-L TC-DD EM, 230 240 V 50/60 Hz version Product description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps Small dimensions (28
More informationEmergency lighting units EM powerled
M BASIC 1 W Emergency lighting Driver 1 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting on maintained operation SEV for output voltage < 60 V DC
More informationEmergency lighting units EM converterled
EM converter EM converter BASIC icd 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 54 V SEV for
More informationEmergency lighting units EM powerled
M BASIC 1 W Emergency lighting Driver 1 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting on maintained operation SEV for output voltage < 60 V DC
More informationEmergency lighting units EM converterled. EM converterled ST 90 V SELFTEST series
ST 90 V SEFTEST series Product description lighting Driver with self-test function For self-contained emergency lighting For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC
More informationEmergency lighting units EM converterled. EM converterled ST 50 V SELFTEST series
ST 50 V SEFTEST series Product description lighting Driver with self-test function For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output voltage < 60 V DC ow
More informationEmergency lighting units EM converterled
EM converter EM converter BASIC MH/iFePO4 250 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 50 250 V ow profile casing
More informationEmergency lighting units PC COMBO
T5 PC, 220 240 V 50/60 Hz Linear fluorescent lamps Product description Combination of electronic ballast and emergency lighting unit For T5 fluorescent lamps Low-profile casing (21 x 30 mm cross-section)
More informationEmergency lighting units EM powerled. EM powerled BASIC 4W Emergency lighting LED Driver
BASIC 4W Emergency lighting Driver Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60 V DC ow profile casing (21 x 30 mm
More informationEmergency lighting units EM series. EM BASIC, V BASIC version
T T TCDE TCSE TCTE TC TCDD EM, 0 0 V version roduct description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps Small dimensions ( x mm crosssection) roperties
More informationEmergency lighting units EM powerled
EM power EM power BASIC 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60
More informationEmergency lighting units EM converterled
BASIC MH/iFePO4 250 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 50 250 V ow profile casing (21 x 30 mm cross-section)
More informationEmergency lighting units EM converterled
BASIC MH/iFePO4 90 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC ow profile
More informationEmergency lighting units EM converterled. EM converterled PRO 200 V PRO series
EM converter EM converter PRO 200 V PRO series Product description lighting Driver with DAI interface and automatic test function For self-contained emergency lighting For modules with a forward voltage
More informationEmergency lighting units EM converterled. EM converterled PRO 50 V PRO series
PRO 50 V PRO series Product description lighting Driver with DAI interface and automatic test function For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More informationEmergency lighting units PC COMBO
TC-DD PC CFL E COMBO, 230 240 V 50/60 Hz Compact fluorescent lamps Product description Combination of electronic ballast and emergency lighting unit For TC-DD compact fluorescent lamps For manual testing
More informationEmergency lighting units EM powerled
BASIC FX 80 W Combined emergency lighting LED Driver Product description Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION (CF) Emergency lighting LED Driver with manual
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More informationEmergency lighting units EM powerled
EM power EM power PRO EZ-3, 1 2 W Emergency lighting units Product description emergency lighting supply unit with I interface and automatic test function Properties Mains and emergency operation I interface
More informationEmergency lighting units EM powerled
EM power EM power PRO EZ-3, 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with I interface and automatic test function For self-contained emergency lighting
More informationEmergency lighting units EM powerled
BASIC FX SR 50 W Combined emergency lighting LED Driver Product description Independent fixed output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION (CF) Emergency lighting function
More informationEmergency lighting units EM powerled. EM powerled BASIC CLE Emergency lighting LED Driver
BASIC CE Emergency lighting ED Driver Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) and emergency lighting function for manual testing For selfcontained
More informationEmergency lighting units EM series
EM power PRO EZ-3 Emergency lighting supply units Product description emergency lighting supply unit with DALI interface and automatic test function Properties Mains and emergency operation DALI interface
More informationEmergency lighting units EM powerled
PRO EZ-3, 4 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with LI interface and automatic test function For self-contained emergency lighting SELV for output
More informationEM BASIC V 50/60 Hz
T, T, TCDD, TC, TCE, TCDE, TCTE linear and compact lamps 00 V 0/0 Hz RoH 0 00 Description: Emergency lighting modules with hour or hour duration. Five pole technology = pole changeover and a delayed action
More informationEmergency lighting units LED series
series EM power BASIC Emergency lighting supply units emergency lighting supply unit for manual testing Properties Mains and emergency operation Low-profile casing (21 x 30 mm cross-section) Constant current
More informationEmergency lighting units EM powerled. EM powerled BASIC CLE Emergency lighting LED Driver
BASIC CE lighting ED Driver roduct description ED Driver for mains operation with integrated Simple CRRIDR FUCTI () and emergency lighting function for manual testing For luminaire installation For the
More informationEmergency lighting units EM powerled. EM powerled BASIC 15 W CLE Emergency lighting units LED
powered powered BASIC 15 W CE lighting units ED roduct description Controlgear for ED for mains operation with integrated simple CRRIDR FUCTI () and emergency lighting funtion for manual testing For luminaire
More informationEmergency lighting units EM powerled. EM powerled BASIC 15 W CLE Emergency lighting LED Driver
E BASIC 15 W CE lighting ED Driver roduct description ED Driver for mains operation with integrated Simple CRRIDR FUCTI () and emergency lighting function for manual testing For luminaire installation
More informationEmergency lighting units EM powerled
ST FX SR 45 W Combined emergency lighting LED Driver Product description Independent dimmable LED Driver Emergency lighting LED Driver with automatic selftest functionality For self-contained emergency
More informationPC T8 TEC, W PC TEC
T8 TC-L PC T8 TEC, 18 58 W PC TEC Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range (for
More informationFL ballasts Electronic fixed output PC T8 TEC, W PC TEC T8
T8 TC-L PC T8 TEC, 18 58 W PC TEC T8 Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range
More informationFL ballasts Electronic fixed output. PC TCL PRO, W PC PRO compact
EL T5c T8 TC-L PC TCL PRO, 36 55 W PC PRO compact Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 hours (at max. ta with a failure rate max. 0.2 % per 1,000 hours)
More informationFL ballasts Electronic fixed output PC T8 PRO, W PC PRO T8
T8 PC T8 PRO, 0 70 W PC PRO T8 Product description CELMA Energy Efficiency Index A2 Nominal life-time up to 50,000 h (at ta 50 C with a failure rate max. 0.2 % per 1,000 h) Large temperature range (for
More informationFL ballasts Electronic fixed output. PC T5 TOP lp, W PC TOP T5
EL T5 TC-L PC T5 TOP lp, 1 5 W PC TOP T5 Product description CELMA Energy Efficiency Index A2 Nominal life up to 50,000 hours (at ta. 50 C with a failure rate max. 0.2 % per 1,000 hours) Large temperature
More informationFL ballasts Electronic fixed output PC BASIC, 4 28 W PC BASIC
PC BASIC, 4 28 W PC BASIC Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 h (at max. ta with a failure rate max. 0.2 % per 1,000 h) Large temperature range (for
More informationFL ballasts Electronic fixed output. PC BASIC sl, 4 28 W PC BASIC
T8 c PC BASIC sl, 4 28 W PC BASIC Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 h (at max. ta with a failure rate max. 0.2 % per 1,000 h) Large temperature range
More informationLED Driver Linear / area fixed output industry. Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series
Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such
More informationFL ballasts Electronic fixed output
T8 PC T8 PRO lp, PC T8 PRO sl, 18 58 W PC PRO T8 Product description Highest possible CELMA Energy Efficiency Index EEI = A2 BAT 21 0 Nominal life up to 100,000 h (at ta. 50 C with a failure rate max.
More informationLED Driver Linear / area fixed output industry. Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series
Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such
More informationFL ballasts Electronic fixed output
PC PRO lp, PC PRO sl, 18 58 W PC PRO Product description Highest possible CELMA Energy Efficiency Index EEI = A2 BAT 21 0 Nominal life up to 100,000 h (at ta. 50 C with a failure rate max. 0.1 % per 1,000
More informationPC T8 PRO, W T8 fluorescent lamps
T8 PC T8 PRO, 18 70 W T8 fluorescent lamps Product description Average life = 50,000 hours (at max ta. with a failure rate 0.2 % per 1,000 hours) Large temperature range (for values see table) Safety shutdown
More informationEmergency lighting units EM powerled
PRO DIM C 45 W Combined emergency lighting LED Driver Product description Dimmable built-in LED Driver Emergency lighting LED Driver with DALI interface and automatic test function For self-contained emergency
More informationEmergency lighting units EM LED Light Engines
EM readyapply SELFTEST W EM readyapply Product description LED emergency module suitable for direct installation in ceilings Complete set with integrated electronics, LED module, heat sink, optics and
More informationLED Driver Linear / area dimming industry. Driver LC 150W mA IND sl EXC EXCITE series
Driver LC 150W 200 1050mA IND sl EXC EXCITE series Product description Constant current built-in Driver for LED, particularly suitable for industrial applications in tough environments such as cold warehouses
More informationEM converterled BASIC Installation and wiring instructions
on-maintained emergency lighting for manual testing for ED modules with a forward voltage of 10 to 200 V for luminaire installation 3 h rated duration EM convertered BASIC Installation and wiring instructions
More informationLED Driver Linear / area fixed output
Driver LC 65W 4-7mA flexc lp ANCED series Product description Built-in constant current LED Driver Adjustable output current between 4 and 7 ma Max. output power 65 W Up to 94 % efficiency Nominal life-time
More informationElectronic ballasts for fluorescent lamps Multi-lamp ECG. PC T5 PRO-M lp, W T5, T8, compact (CFL) and T5c circular fluorescent lamps
T5 T8 TC-F TC-L T5c PC T5 PRO-M lp, 14 80 W T5, T8, compact (CFL) and T5c circular fluorescent lamps Product description Integrated lamp detection Operation of T5 lamps of the same length Average life
More informationFL ballasts Electronic fixed output. PC TC PRO 1/2x9 70 W PC PRO compact
EL HE PC TC PRO 1/2x9 70 W PC PRO compact Product description CELMA Energy Efficiency Index A2 BAT / A2 Nominal life-time up to 100,000 h (at ta 50 C with a failure rate max. 0.2 % per 1,000 h) Large temperature
More informationLED Driver Compact fixed output
Driver LC 45W 500 1400mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter
More informationLED Driver Compact fixed output
Driver LC 25W 350 1050mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter
More informationElectronic ballasts for fluorescent lamps Professional electronic ballast
HE PC TC PRO 1/2x9 70 W,,, HE,,, compact fluorescent lamps Product description Average life = 50,000 hours (at ta for 50,000 h with a failure rate 0.2 % per 1,000 hours) Large temperature range (for values
More informationPHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCD ECO, W Compact and T5c fluorescent lamps
Product description oise-free precise control via signal or switchdim CELMA energy class A1 1) Interfaces switchdim Integrated SMART-Interface Functions Optimum filament heating in any dimmer setting Automatically
More informationLED Driver Linear / area dimming
Driver LC W 0 1050mA 50V IOTr lp PRE UNV PREMIUM series SELV (US applications) Product description Constant current LED Driver Dimming range 1 100 % Adjustable output current between 0 and 1,050 ma via
More informationLED control gear Compact fixed output
Driver LCI 65 W 1400/1750 ma TEC SR TEC series Product description Independent fixed output LED Driver Constant current LED Driver Output current 1,400 or 1,750 ma Max. output power 65 W Nominal life-time
More informationEmergency lighting units EM LED Light Engines. EM ready2apply BASIC 1 2 W EM ready2apply
EM readyapply BASIC W EM readyapply Product description LED emergency module suitable for direct installation in ceilings Complete set with integrated electronics, LED module, heat sink, optics and battery
More informationEmergency lighting units EM LED Light Engines. Module EM-ES 08/10/12 Mk2 EM LED linear / area
X1 X1 DC1 DC1 D81 D82 D83 D84 D85 D86 DC2 AK AK AK D121 D101 D81 D122 D102 D123 D82 D103 D124 D83 D125 D126 D84 D127 D106 D85 D128 D107 D129 D86 D108 D1210 DC2 AK AK AK D104 D105 Emergency lighting units
More informationTable of contents NLE 2 x 36 W T8, 230 V, 4 Ah, 1.5 h 4
Data sheet Integrated emergency converter for fluorescent lamps zone 2 Ex 100,000 h suitable for zone 2 hazardous areas For mains and battery supply Integrated battery management inear V inear V Emergency
More informationLED light engine / OLED LED compact. Umodule STARK CLE 360 CLASSIC EM STARK CLE
D LED light engine / OLED Umodule STARK CLE 3 CLASSIC EM STARK CLE Product description Ideal for ceiling-mounted and wallmounted luminaires Based on annular and compact fluorescent lamps Efficiency of
More informationPHASED OUT. LED light engine / OLED LED compact. Module CLE G2 190mm 1500lm ADV EM Modules CLE
Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency function and SWITCH sensor Based on
More informationLED light engine / OLED LED compact
Module CLE G2 19mm 15lm ADV EM Modules CLE Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency
More informationTrustSight LED Emergency Lighting
TrustSight Emergency ar 20-95V 3W/6W Datasheet TrustSight LED Emergency Lighting TrustSight ar 20-95V 3W/6W The application of LED technology within the lighting sector also requires integration of reliable
More informationLED light engine / OLED LED compact. Umodule STARK CLE CLASSIC EM STARK CLE
D LED light engine / OLED Umodule STARK CLE 3-4 CLASSIC EM STARK CLE Product description Ideal for ceiling-mounted and wallmounted luminaires Based on annular and compact fluorescent lamps Efficiency of
More informationEMERGENCY ONE-LED TM UNITY-LED TM LED MAINS/EMERGENCY DRIVER
Unity-LED TM is a range of Maintained emergency lighting modules combining both mains and emergency drivers in a compact lowprofile enclosure and suitable for use in either internal or remote self-contained
More informationEmergency lighting units EM Batteries
LiFePO4 Accus 1.5 9.0 Ah Lithium Iron Phosphate cells (LiFePO4) Product description High-temperature LiFePO4 cells for use with emergency lighting units Up to 8-year design life 3-year guarantee Properties
More informationLED light engine / OLED LED linear / area. Module STARK LLE PREMIUM Modules LLE
Module STARK LLE PREMIUM Modules LLE Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 125 lm/w at tp = 65 C High colour rendering index CRI > 80 Low tolerances
More informationEMERGENCY ONE-LED TM UNITY-LED TM LED MAINS/EMERGENCY DRIVER
Unity-LED TM is a range of Maintained emergency lighting modules combining both mains and emergency drivers in a compact lowprofile enclosure and suitable for use in either internal or remote self-contained
More informationLED Emergency Lighting
TrustSight Emergency SEV & High Voltage Datasheet TrustSight ED Emergency ighting TrustSight inear SEV & High Voltage The application of ED technology within the lighting sector also requires integration
More informationLED light engines LED linear / area. Module STARK QLE G3 SELECT Modules QLE EXCITE
Module STARK QLE G3 SELECT Modules QLE EXCITE Product description Ideal for linear and panel lights Luminous flux range from 1,9 1,62 lm LED system solution with outstanding system efficacy up to 137 lm/w,
More informationLED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC EM STARK LLE
Umodule STARK LLE-G3-24-28-12 CLASSIC EM STARK LLE Product description Ideal for linear and panel lights Luminous flux range 1,13 up to 1,64 lm Combined LED module for general and emergency lighting Integrated
More informationLED light engine / OLED LED linear / area. Module LLE PREMIUM CRI90 LLE PREMIUM
Module LLE PREMIUM CRI90 LLE PREMIUM Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 122 lm/w at tp = 65 C High colour rendering index CRI > 90 Low tolerances
More informationOEM Emergency Portfolio. Product Guide. Emergency components for LED, fluorescent and auxiliary purpose
OEM Emergency Portfolio Product Guide Emergency components for LED, fluorescent and auxiliary purpose Contents Introduction to this guide 3 LED Modules 4 PHL-EL3 PHL-EL3-80 PHL-EL3-D PHL-EL3-D80 PHL-EL3-4
More informationLED light engines ready2apply. Engine SLA AC G2 50mm SNC Engine SLA ESSENCE
Engine SLA AC G2 5mm SNC Engine SLA ESSENCE Product description Fits in most existing MR16 / GU1 halogen luminaires 1 W LED Equivalent to 5 W MR16 halogen with higher lumen output Perfect solution for
More informationTunable White LED linear / area. Module LLE G2 PREMIUM LLE PREMIUM
Module LLE G2 PREMIUM LLE PREMIUM Product description Linear Tunable White LED module with 2,700 and 6,500 K SMT packages Ideal for linear and panel luminaires Optimal solution for Tunable White applications
More informationLED light engine / OLED LED linear / area
Module QLE G1 488x239mm 25lm ADV-SE Modules QLE Product description Ideal for linear and panel lights Excellent homogeneity: the new QLE is designed to provide best homogeneity with 6 x 6 mm and 625 x
More informationPHASED OUT. LED light engine / OLED LED linear / area. Module QLE G1 488x239mm 2500lm ADV-SE Modules QLE
Product description Ideal for linear and panel lights Excellent homogeneity: the new QLE is designed to provide best homogeneity with 6 x 6 mm and 625 x 625 mm fitting Time saving: less mounting/wiring
More informationPHASED OUT. LED light engine / OLED LED compact. Module STARK CLE , CLE CLASSIC Modules CLE
Product description The round shape downlight solution Designed for simple and cost-effective downlight fixtures No reflector or additional module housing required Efficacy of the module up to 139 lm/w
More informationLED light engine / OLED LED compact
Module STARK CLE 12-2 CLASSIC / CLE 13-25 CLASSIC Modules CLE Product description Designed for diffuser downlights and wallmounted luminaires Ideal to realise simple luminarie designs For easy adaptation
More informationPHASED OUT. LED light engine / OLED LED compact. Module STARK CLE CLASSIC / CLE CLASSIC Modules CLE
Product description Designed for diffuser downlights and wallmounted luminaires Ideal to realise simple luminarie designs For easy adaptation to existing luminarie architecture Luminarie body can act as
More informationReliability with the most essential intellect. Philips HF-Essential Electronic ballasts for TL5 lamps
Reliability with the most essential intellect Philips HF-Essential Electronic ballasts for TL5 lamps HF-Essential - Reliability with the most essential intellect Electronic ballasts for TL5 lamps The cost-saving
More informationPHASED OUT. LED light engine / OLED LED linear / area. Module LLE G3 16x140mm 325lm ADV, LLE G3 16x280mm 650lm ADV Modules LLE ADVANCED
Product description Ideal for compact linear luminaires designs Homogenous illumination thanks to small package distance Best refurbishment option for T5 lamps Luminous flux range 29 up to 85 lm LED system
More informationLED modules LED linear / area
Module QLE G2 3x3mm 5lm ADV-SE Modules QLE Product description Ideal for panel and louvre luminaires, cost-effective replacement for 4 x 14 W (18 W) T5 / T8 lamps Luminous flux range from 3,5 up to 8,2
More informationU LED modules, converters and systems GENERAL ILLUMINATION. Umodule STARK QLE CLASSIC EM umodule STARK QLE PHASED OUT. Ordering data.
EM_In() EM_Out(-) D Product description Ideal for linear and panel lights Combined LED module for general and emergency lighting Integrated separate emergency LEDs controlled by EM powerled (2 or 4 W version)
More informationDriver LC 17W mA flexc C EXC EXCITE series
LC 17 W 250 700 flexc C EXC - Tridonic Seite 1 von 5 Home Products LED Drivers Compact fixed output EXCITE series LC 17 W 250 700 flexc C EXC Driver LC 17W 250 700 flexc C EXC EXCITE series Product description
More informationEMERGENCY ONE-LED TM OMNI-LED DST TM LED DALI EMERGENCY CONVERSION MODULE WITH SELF-TEST
Product description Omni-LED DST TM is a range of DALI Self-Test emergency lighting conversion modules housed in a compact low-profile enclosure, and suitable for use with maintained, self-contained LED
More informationSLA DC. LED light engines ready2apply. Module SLA DC G2 50mm SNC Modules SLA ESSENCE
SLA DC Module SLA DC G2 50mm SNC Modules SLA ESSENCE Product description Fits in most existing MR16 / GU10 halogen luminaires Replacement of 50 W MR16 halogen lamps or 20 W HID lamp Module with integrated
More informationLED light engine / OLED LED linear / area
Module QLE G2 38x38mm 5lm ADV-SE Modules QLE Product description Ideal for panel and louvre luminaires, cost-effective replacement for 4 x 14 W (18 W) T5 / T8 lamps Luminous flux range from 3,52 up to
More informationLINEAR LED DRIVERS. ComfortLine Selectable Current (Output Terminal) ComfortLine SELECTABLE CURRENT (OUTPUT TERMINAL)
LINEAR LED DRIVERS ComfortLine SELECTABLE CURRENT (OUTPUT TERMINAL) 186443, 186444, 186486, 186487, 186488, 186491, 186492, 186737 Typical Applications Built-in in linear luminaires for Office lighting
More informationTrustSight LED Emergency Lighting
TrustSight Emergency Point 15-55 V 3 W Datasheet TrustSight LED Emergency Lighting TrustSight Point 15-55 V 3 W The application of LED technology within the lighting sector also requires integration of
More informationEMERGENCY ONE-LED TM SOLO TM NON MAINTAINED LED LAMP AND DRIVER KIT
Product description One-LED Solo TM is a non-maintained, self-contained LED emergency luminaire comprising an Omni-LED emergency LED driver, hinged rechargable battery and a flush-mount SELV lamp head.
More information7 Lighting Technology
7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:
More information