GENREADY LOAD CENTER AND TRANSFER SWITCH

Transcription

1 GENEADY LOAD CENTE AND TANSFE SWITCH DESCIPTION The Geneady load center is a hybrid panel that operates as a normal load center and also allows for seamless integration of standby generators. GENEADY LOAD CENTE FEATUES 4 circuit capacity with the use of tandem breakers Dimensions are the same as a standard 42-space main load center Utilizes standard Siemens components Protect up to 8 circuits, up to 3 with the use of tandem breakers circuits available for non-protected loads Circuits can easily be shifted from protected to non-protected and vice versa UL listed and service entrance rated Models available with or without EZ Transfer operator factory installed Single panels are compatible with generators rated up to Amps/3 kw Multiple Geneady load centers can be supported with a single generator Flush Mount NEMA Enclosure EZ TANSFE OPEATO FEATUES Factory installed on the Geneady Advanced model. Can be easily installed in the field on the Geneady Basic with available kit Allows for manual or automatic operation Please Note: The Geneady Panel is designed to be directly compatible with any Generac manufactured product. Use of another manufacturer s generator may require the purchase and installation of additional sensing and control components.

2 PODUCT OPTIONS Geneady Load Center and Transfer Switch Geneady Basic Load Center Model Number 5448 Geneady Advanced Load Center with EZ Transfer Operator Model Number 5449 EZ Transfer Operator Field Installation Kit Model Number 5447 Includes: A Circuit Breaker A Lower Panel Circuit Switch 2A Main Circuit Breaker INSTALLATION OPTIONS Includes Geneady Basic plus: EZ Transfer Operator A Lower Panel, Generator Circuit Switch 5A Double Pole Breaker for Sensing Circuit Plus all other components found in the field installation kit. Transfer Operator Field Installation Kit Includes: Transfer Operator 5A Double Pole Breaker for Generator Sensing Circuit A Lower Panel, Generator Circuit Switch Hold Down Bracket Interlock Bar Mounting Hardware Decals Installation Guide Geneady Basic Geneady Advanced Geneady Complete The Geneady load center is installed without the EZ Transfer operator. It replaces the home s main load center. This option will save the homeowner thousands in upgrade costs when a generator is installed. The Geneady load center is installed with the EZ Transfer operator. All fuel and electrical lines (contractor supplied) are installed to the planned generator site along with the generator pad (if required). The home is completely wired and ready for the addition of a generator in the future. Everything included in the Geneady Advanced level is installed along with an automatic standby generator. The home s selected circuits will be backed up by generator power whenever the utility is lost.

3 5A A 5A A INTECONNECTIONS Geneady Load Center and Transfer Switch GOUP GENEAC P/N G4746 FUSE W/HOLDE G858E DECAL POWE LEADS AND TANSFE SWITCH LEADS MUST BE UN IN TWO DIFFEENT CONDUITS. METE EXCEPTIONS: IF THE INSULATION ATING ON ALL WIING IS ATED FO 6V AND THE LENGTH OF THE CONDUIT IS 3ft O LESS IT IS ACCEPTABLE TO INCLUDE GENEATO CONTOL & POWE WIING IN ONE CONDUIT. SOCKET GND 5A FUSE EPLACEMENT 5A, 32VDC TYPE-ATO G N 94 WANING NOTE WIE OIENTATION 24VAC INPUT 2VDC TANSFE ELAY COIL N L GENEAC NEUTAL BA GOUND BA ENGINE GENEATO CONNECTION PANEL ALL WIING TO BE MINIMUM 8AWG, 3VAC ATING. ECOMMENDED WIE TYPE: THHN LICENSED ELECTICIAN AND MUST NOTE: INSTALLATION TO BE DONE BY A MEET ALL NATIONAL, STATE AND LOCAL ELECTICAL CODES. GEN-EADY LOAD CENTE EXPLODED VIEW: GEN EADY LOAD CENTE DAWING #: G4744 EVISION: H-2827-D DATE: 9/8/8 PAGE OF 4 of 3

4 5A A 5A A INTECONNECTIONS Geneady Load Center and Transfer Switch GOUP G POWE LEADS AND TANSFE SWITCH LEADS MUST BE UN IN TWO DIFFEENT CONDUITS. EXCEPTIONS: IF THE INSULATION ATING ON ALL WIING IS ATED FO 6V AND THE LENGTH OF THE CONDUIT IS 3ft O LESS IT IS ACCEPTABLE TO INCLUDE GENEATO CONTOL & POWE WIING IN ONE CONDUIT. GOUDING OD (ELECTODE) N ENGINE GENEATO CONNECTION PANEL ALL WIING TO BE MINIMUM 8AWG, 3VAC ATING. ECOMMENDED WIE TYPE: THHN NOTE: INSTALLATION TO BE DONE BY A LICENSED ELECTICIAN AND MUST MEET ALL NATIONAL, STATE AND LOCAL ELECTICAL CODES. GOUNDING ELECTODE CONNECTION (LOCATED ON THE EA OF UNIT) E E2 N BC BC LINE 5B WHITE GEEN 5B 28 AND LATE AI-COOLED HSB GENEATOS EXPLODED VIEW: GEN EADY LOAD CENTE DAWING #: G4744 METE SOCKET BC- L GOUND BA GENEAC NEUTAL BA BC-LINE DUPLEX BEAKE GEN-EADY LOAD CENTE EVISION: H-2827-D DATE: 9/8/8 PAGE 2 OF 4 2 of 3

5 N 5A 5A A A INTECONNECTIONS Geneady Load Center and Transfer Switch N QT SEIES ENGINE GENEATO CONNECTION PANEL ALL WIING TO BE MINIMUM 8AWG, 3VAC ATING. ECOMMENDED WIE TYPE: THHN GENEAC P/N G4746 FUSE W/HOLDE G858E DECAL POWE LEADS AND TANSFE SWITCH LEADS MUST BE UN IN TWO DIFFEENT CONDUITS. EXCEPTIONS: IF THE INSULATION ATING ON ALL WIING IS ATED FO 6V AND THE LENGTH OF THE CONDUIT IS 3ft O LESS IT IS ACCEPTABLE TO INCLUDE GENEATO CONTOL & POWE WIING IN ONE CONDUIT. GOUP G NOT USED IN THIS APPLICATION N 94 TNS SW WIE TNS SW WIE 94 E E2 3 5A 8 ON CUSTOME CONNECTION NOTE: 78 AND 83 CONNECTIONS AE TB 2 M STT WIE 83 M STT WIE 78 EXPLODED VIEW: GEN EADY LOAD CENTE DAWING #: GOUND NEUTAL METE SOCKET BC- L GENEAC NEUTAL BA GOUND BA BC-LINE DUPLEX BEAKE GEN-EADY LOAD CENTE NOTE: INSTALLATION TO BE DONE BY A LICENSED ELECTICIAN AND MUST MEET ALL NATIONAL, STATE AND LOCAL ELECTICAL CODES. EVISION: H-2827-D DATE: 9/8/8 PAGE 3 OF 4 3 of 3

6 UNIT DIMENSIONS Geneady Load Center and Transfer Switch Outside Dimensions of Enclosure Shell Front Cover & Door Equipment Ground Utility Generator Transfer Operator Bonding Connection Neutral

7 SPECIFICATIONS Geneady Load Center and Transfer Switch Enclosure...NEMA Type, general purpose, painted metal Main Breaker... 2 Amp Generator Switch... Amp Main breaker wire size... # to 3 mcm Cu-Al Generator switch wire size...# 2 to / Cu, /-2/ Al Neutral Lug... # 6 to 3 mcm Ground Lug... # 4-2/ Ground Fault or Arc Fault Circuit Breaker... QPF or QAF Siemens Maximum number of circuits (standard " breakers / tandem /2" breakers) Protected circuits...8/3 Non-protected circuits.../na Total circuits...28/4 Withstand rating Main bus (amps)...22, Meets NEC wire bending space...yes UL listed...yes Seismically qualified to meet UBC code...yes Weight Geneady Basic w/o EZ transfer operator (Geneady Advanced with EZ transfer operator) lbs. (49 lbs.) Operating temperature range...-2º F to 4º F Generac Power Systems, Inc. S45 W2929 HWY. 59, Waukesha, WI 5389 generac.com 29 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 752SBY/Printed in U.S.A. 3.8, rev: 3.9