Process integration reduces cost per unit

Size: px
Start display at page:

Download "Process integration reduces cost per unit"

Transcription

1 ENGEL at Chinaplas 2013 Process integration reduces cost per unit Schwertberg/Austria March Innovative system solutions for more efficient processes and a greater competitive advantage are the focus of the ENGEL trade fair booth at Chinaplas 2013 from 20th to 23rd May in Guangzhou. Live on show: the new all-electric ENGEL e-mac injection moulding machine, once again demonstrating its capability in the manufacturing of electronic mass products. Powerful, highly accurate, economical and compact: the all-electric ENGEL e-mac injection moulding machine sets new benchmarks in the production of precision technical parts and electronic components. At Chinaplas 2013, the new model series is celebrating its first airing in China. "The demand for compact, all-electric injection moulding machines for components which need to have very precise dimensions is increasing," says Gero Willmeroth, Head of Sales and Service at ENGEL MACHINERY (SHANGHAI). "The ENGEL e-mac helps us to meet these requirements in the best possible way." During the four days of the fair, an ENGEL e-mac 50/50 will be producing holders for semiconductor chips made of polyetherimide, an application that poses an extremely tough challenge in terms of the injection moulding machine's precision. The holders measure 26 by 23 mm, but the critical factor above all others is the very thin wall thickness of just 0.65 mm and the mesh structure to be created with an inner edge length of 0.42 mm. Despite these exacting requirements and the hard-to-handle raw material, the ENGEL e-mac achieves a cycle time of just 19 seconds in this application. Maximum precision, minimum footprint With an acceleration of over 20 m/s², the injection axis of the ENGEL e-mac is now the world's fastest of its kind. Additionally, the synchronous movements of the drive axes ensure fast cycle times. 1

2 Thanks to its extremely compact footprint, the ENGEL e-mac saves shop floor space. Additionally, it is very frugal in its use of resources. From injecting and metering to mould and ejector movements, all drives in the ENGEL e-mac are servo-electric. They are operated by a modern axis system solution involving a stabilised intermediate circuit. The braking energy is recovered and fed back into the grid. The ENGEL e-mac series has four machine sizes with clamping forces of 50, 75, 100 and 180 tonnes. Equipped with the proven CC 200 control unit, the ENGEL e-mac offers complete modularity and automation technology integration capability. The new machine series sees ENGEL reinforce its position as an all-round talent in the field of all-electric injection moulding technology. While the tried-and-trusted ENGEL e-motion machines have established themselves in medical technology and in fast running applications in the packaging industry, the ENGEL e-mac is an extremely economical alternative for applications in technical moulding and the electronics industry. Shortest cycle times An ENGEL e-motion 440/160 T plays the leading role in the ENGEL packaging exhibition area at Chinaplas The all-electric injection moulding machine will be producing thinwall technology margarine tubs in a 2-cavity mould. Thanks to integrated in-mould labelling, the unit costs are very low. Ready-to-fill food packaging with high quality decorations is manufactured in a single step. The project partner for IML Automation is Campetella from Montecassiano, Italy. "All-electric ENGEL e-motion injection moulding machines are increasingly being deployed in high-performance applications in the packaging industry", says Willmeroth. "The consistent ongoing development of this model series is what makes this possible." The latest generation of ENGEL e-motion injection moulding machines achieves cycle times of well under 3 seconds and injection speeds of more than 500 mm per second, a performance class that 2

3 was long the domain of hydraulic accu machines. "Thanks to all-electric drive technology, we can now combine maximum performance with maximum energy efficiency", says Willmeroth. Cockpit without buttons and switches ENGEL is presenting a particularly innovative form of foil back injection in its automotive exhibition section. Visitors to the fair can take a seat in the automobile cockpit of the future and experience how vehicles will be even easier to use than smartphones by simple touch, feel and interact controls. "Thanks to capacitive sensors, we are already producing functional electronic elements with a totally closed, robust surface that do not need buttons or switches", says Gero Willmeroth. "This trend provides for more ease of use of the application, giving the product designers a greater degree of freedom, and substantially reduces manufacturing costs thanks to the high degree of process integration." ENGEL is demonstrating what this can look like in practical terms with the production of a centre console in a highly-integrated and automated production cell on an ENGEL duo 2050/350 pico injection moulding machine equipped with ecodrive servohydraulics and a swivel plate. While a preformed capacitive foil is back injected with PC/ABS on one side of the mould, the basic component is coated with polyurethane on the other to protect the surface and give it a premium appearance. Two ENGEL viper 20 and ENGEL viper 40 type linear robots will take care of the component and part handling. Starting with capacitive foils and plastic pellets, ready-for-use controls for the vehicle interior are thus produced in a single step, while legacy methods would involve individually injecting and then assembling several different components. The technology, which ENGEL is marketing under the name of Sensitive Surface in cooperation with its system partners, is based, among other things, on the ENGEL clearmelt process, and the touchskin technology by plastic electronic in Linz/Austria. Other partners involved in this project are Hennecke in Sankt Augustin/Germany (polyurethane 3

4 processing), Schöfer in Schwertberg/Austria (mould making) and Magna Exterior & Interior Systems in Munich/Germany (application). But it's not just in the automotive industry that Sensitive Surface Technology will revolutionise the design of the controls on electronic systems and devices. Enquiries have also been received from the household appliances and medical technology industries. Fully automated, post-processing-free and virtually free from burrs ENGEL is demonstrating its excellent system solution competency in elastomer processing during Chinaplas 2013 by manufacturing dummies for babies in liquid silicon on an ENGEL victory 500/110 tech injection moulding machine. "Fully-automated and post-processing-free these are the most important specifications for producing mass products from elastomer materials", Gero Willmeroth emphasises. "This is why high-end production lines are increasingly being deployed in China for these applications." To accommodate the production cell perfectly to match the product, volume and materials, ENGEL draws on its wide spectrum of hydraulic, hybrid and all-electric injection moulding machines, as well as injection units, feeders and metering pumps specially developed for elastomer processing. In many cases, tie-bar-less ENGEL victory injection moulding machines offer benefits in LSR applications. Compared to other model series with tie-bars, the excellent plate stiffness ensures superior mould support, thus reducing burr formation and improving the product quality. The ENGEL victory machine on show at Chinaplas uses cold runner technology. The 8-cavity mould was provided by ENGEL partner Elmet. The ENGEL victory 110 tech injection moulding machine was built at the ENGEL production facility for small to medium sized machines in South Korea, which will be starting up production at its massively expanded production hall shortly before Chinaplas 2013 opens up to the public. The production capacity has been almost doubled from 650 to more than 1100 machines per year. It was just last year that ENGEL also substantially 4

5 extended its large-scale machine plant in Shanghai. Both investments help to do justice to growth on domestic markets and increasing demand from South-East Asia. "Thanks to decentralised production in Asia, we can assure our customers of short lead times and the accommodation of the injection moulding machines and turnkey solutions to the specific requirements on site", says Gero Willmeroth. ENGEL at Chinaplas 2013 in Guangzhou: Hall 4.1, Booth J 41 Setting new benchmarks in the production of precision technical parts and electronic components; the all-electric ENGEL e-mac sees its first public airing to a Chinese audience in Guangzhou. 5

6 During the Chinaplas an ENGEL e-mac will be producing holders for semiconductor chips made of polyetherimide, an application that poses an extremely tough challenge in terms of the injection moulding machine's precision. Consistently enhanced for use in high-performance and fast-running applications: the all-electric ENGEL e-motion machines. 6

7 Ready-to-fill in a single step: the margarine tubs are produced by an all-electric ENGEL e-motion 440/160 T injection moulding machine in thin wall technology with in-mould labelling (IML). Welcome to the future of the smart cockpit: the combination of injection moulding technology and mechatronics helps to functionalise completely closed plastic surfaces with electronic intelligence. 7

8 The integrated and automated production cell for manufacturing centre consoles in Sensitive Surface Technology achieves virtually unrivalled efficiency and economy. Maximum product quality thanks to tie-bar-less technology: the excellent platen stiffness achieved by the ENGEL victory injection moulding machines reduces burr formation in LSR processing. 8

9 For exacting quality requirements: during Chinaplas 2013 ENGEL will be producing dummies for babies from liquid silicon on an ENGEL victory 500/110 tech injection moulding machine. Pictures: ENGEL ENGEL AUSTRIA GmbH ENGEL is one of the global leaders in the manufacture of plastics processing machines. Today, the ENGEL Group offers a full range of technology modules for plastics processing as a single source supplier: Injection moulding machines for thermoplastics and elastomers, and automation, with the assurance that individual components are also competitive and successful in the world markets. With eight production plants in Europe, North America and Asia (China, Korea), subsidiaries and representatives in over 85 countries, ENGEL offers its customers the optimal global support they need to compete and succeed with new technologies and leading-edge production systems. Contact for journalists: Gerd Liebig, Group Marketing Director, ENGEL AUSTRIA GmbH, Ludwig-Engel-Strasse 1, A-4311 Schwertberg, Austria, Tel.: +43 (0) , fax: -3009, gerd.liebig@engel.at Susanne Zinckgraf, Public Relations Manager, ENGEL AUSTRIA GmbH, Ludwig-Engel-Strasse 1, A-4311 Schwertberg, Austria PR office: Theodor-Heuss-Strasse 85, D Neustadt, Germany, Tel.: +49 (0)6327/ , Fax: -03, susanne.zinckgraf@engel.at Contact for readers: ENGEL AUSTRIA GmbH, Ludwig-Engel-Strasse 1, A-4311 Schwertberg, Austria, Tel.: +43 (0)50/620-0, Fax: -3009, sales@engel.at, 9

ENGEL at Chinaplas 2012 in Shanghai

ENGEL at Chinaplas 2012 in Shanghai ENGEL at Chinaplas 2012 in Shanghai Schwertberg/Austria February 2012. 'Meet the experts' is the word from 18th to 21st April at the ENGEL trade fair booth at Chinaplas 2012 in the Shanghai New International

More information

ENGEL passes 100 million euro mark in Asia production capacity in Shanghai doubled

ENGEL passes 100 million euro mark in Asia production capacity in Shanghai doubled ENGEL passes 100 million euro mark in Asia production capacity in Shanghai doubled Shanghai/China April 2012. In the fiscal year 2011/2012, ENGEL AUSTRIA generated sales of over 100 million in Asia for

More information

Green Cap: the best energy efficiency on the market

Green Cap: the best energy efficiency on the market ENGEL AUSTRIA and PLASTISUD create joint venture for China Green Cap: the best energy efficiency on the market Schwertberg, Austria April 2012. To meet the specific needs of the Chinese market more effectively

More information

ENGEL makes the difference

ENGEL makes the difference ENGEL at NPE 2012 ENGEL makes the difference Schwertberg/Austria January 2012. ENGEL proves its high system solution competences at NPE 2012 Hall A, stand 943 with seven highly integrated and automated

More information

ENGEL makes the difference

ENGEL makes the difference ENGEL at NPE 2012 ENGEL makes the difference York, PA January 4, 2012. ENGEL proves its expertise as a system solution provider at NPE 2012 West Hall, booth 943 with seven highly integrated and automated

More information

Molding, Monitoring and More. ENGEL at MD&M Minneapolis

Molding, Monitoring and More. ENGEL at MD&M Minneapolis Molding, Monitoring and More. ENGEL at MD&M Minneapolis York, Pa. September 25, 2012 ENGEL North America will exhibit a wide range of injection molding technology at the upcoming MD&M Minneapolis 2012

More information

ENGEL at Plast 2015 in Milan

ENGEL at Plast 2015 in Milan ENGEL at Plast 2015 in Milan Schwertberg/Austria March 2015 With highly integrated and automated system solutions from a single source ENGEL increases product quality, manufacturing efficiency and thus

More information

New 950 million euro turnover record

New 950 million euro turnover record ENGEL increases its market shares around the world New 950 million euro turnover record Schwertberg, Austria June 2013. ENGEL set a new record in the 2012/2013 financial year by achieving a global turnover

More information

Fit for High Performance

Fit for High Performance ENGEL packaging at NPE 2012 Fit for High Performance York, Pa. February 2012. All-electric injection molding machines are fast gaining ground in the packaging industry in the field of high-performance

More information

e-mac Electric. Efficient. Compact & precise.

e-mac Electric. Efficient. Compact & precise. e-mac Electric. Efficient. Compact & precise. All-electric. Best-in-class efficiency and precision to the max. All of the ENGEL e-mac s movements are performed by servo-electric drives. The all-electric

More information

Electric. Efficient. Compact & precise. ENGEL e-mac

Electric. Efficient. Compact & precise. ENGEL e-mac Electric. Efficient. Compact & precise. be the first. All-electric. Best-in-class efficiency and precision to the max. All of the s movements are performed by servo-electric drives. The all-electric drive

More information

Production costs reduced dramatically by innovative multi-component technology

Production costs reduced dramatically by innovative multi-component technology LED lamps in a single step Production costs reduced dramatically by innovative multi-component technology State of the art LED products combine a long service life and operating safety with minimal energy

More information

e-win ELECTRIC, EFFICIENT, COMPACT & PRECISE

e-win ELECTRIC, EFFICIENT, COMPACT & PRECISE e-win ELECTRIC, EFFICIENT, COMPACT & PRECISE WINTEC A MEMBER OF THE ENGEL GROUP WINTEC - A STRONG PARTNER NEARBY Based in Changzhou (Province Jiangsu), WIN- TEC has established a sales and service network

More information

Integrated solutions for more competitiveness

Integrated solutions for more competitiveness ENGEL Symposium 2012: 2500 Guests expected Integrated solutions for more competitiveness Schwertberg/Austria April 2012. It s show time at ENGEL AUSTRIA on 13th and 14th June, the international injection

More information

e-motion TL All-electric, tie-bar-less

e-motion TL All-electric, tie-bar-less e-motion TL All-electric, tie-bar-less ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect clamping force distribution

More information

contactless wafer handling with green light macro inspection

contactless wafer handling with green light macro inspection contactless wafer handling with green light macro inspection To Excellence through Competence Established in 1998 in the city of Villach, Austria, mechatronic systemtechnik is one of the world s leading

More information

Large Savings by Integrating Functions

Large Savings by Integrating Functions Press Release 15 October 2014 Sumitomo (SHI) Demag shows manufacturing cell for the production of functionally integrated components Large Savings by Integrating Functions To ensure plastic products meet

More information

The World s Largest Injection Moulding Machine Manufacturer

The World s Largest Injection Moulding Machine Manufacturer The World s Largest Injection Moulding Machine Manufacturer Official Sales and Servicepartner of www.haitian.co.uk PRODUCTION AND GROWTH Established in 1966 and world leaders in injection moulding since

More information

Press release. Highlights every second. 29 June The new El-Exis SP model covers a broad spectrum in the packaging industry

Press release. Highlights every second. 29 June The new El-Exis SP model covers a broad spectrum in the packaging industry Press release 29 June 2011 The new El-Exis SP model covers a broad spectrum in the packaging industry Highlights every second That the new EL-Exis SP offers a sustainable production system for packaging

More information

April 18 25, National Exhibition and Convention Center (Shanghai)

April 18 25, National Exhibition and Convention Center (Shanghai) April 18 25, 2019 National Exhibition Convention Center (Shanghai) Organizers China Association of Automobile Manufacturers China Council for the Promotion of International Trade, Shanghai Sub-Council

More information

Pedals for commercial and special-purpose vehicles. Robust Electronically controlled Flexible installation.

Pedals for commercial and special-purpose vehicles. Robust Electronically controlled Flexible installation. Pedals for commercial and special-purpose vehicles Robust Electronically controlled Flexible installation www.vdo.com The future of mobility begins with the innovations of the present A passion for mobility

More information

SYNCHRONIZATION SYSTEMS

SYNCHRONIZATION SYSTEMS SYNCHRONIZATION SYSTEMS Partners for Solutions TWO PARTNERS ONE JOINT SOLUTION Dear Customer, This cooperation highly suggests itself, not only because of our close proximity to each other at several locations

More information

4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany

4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8 92263 Ebermannsdorf Germany contact@zhafir.com Zhafir Jenius Series Ningbo Zhafir Plastics Machinery Co.,Ltd Address: No.98, Guanhai Road, Chunxiao Town, Beilun

More information

The cold runner that matches your silicone.

The cold runner that matches your silicone. The cold runner that matches your silicone. Industry-specific solutions for Automotive I Consumer I Electrical I Medical I Packaging GÜNTHER Heisskanaltechnik Passion for (Cold Runner) Technology Liquid

More information

ENGEL duo. ready for compact flexibility. be the first.

ENGEL duo. ready for compact flexibility. be the first. ENGEL duo ready for compact flexibility be the first. 2_ENGEL duo The bigger the requirements, the more sophisticated the solution. The ENGEL duo is compatible with any one of your concepts. Thanks to

More information

News Release. Advancing further into a growing market. K 2013 Trade Press Conference June 25 and 26 in Ludwigshafen, Germany

News Release. Advancing further into a growing market. K 2013 Trade Press Conference June 25 and 26 in Ludwigshafen, Germany News Release June 26, 2013 P 309/13e Raphael Christoph Bucher Telefon: +41 61 63-61275 raphaelchristoph.bucher@basf.com K 2013 Trade Press Conference June 25 and 26 in Ludwigshafen, Germany Advancing further

More information

THE FASCINATION OF POWER & ROTATION

THE FASCINATION OF POWER & ROTATION THE FASCINATION OF POWER & ROTATION A PERFECT FIT: YOUR NEEDS OUR SPINDLES ALWAYS ONE TURN AHEAD At IMT, everything revolves around the spindle and all the associated solutions. A proper understanding

More information

Press release 19 October Scoring points with precision and production efficiency

Press release 19 October Scoring points with precision and production efficiency Press release 19 October 2011 Sumitomo (SHI) Demag is attending the Fakuma 2011 with all its series and a new controller version Scoring points with precision and production efficiency With increased precision,

More information

Extended Systec C machine series in the focus of the Chinaplas presentation by Demag Plastics Machinery (Ningbo)

Extended Systec C machine series in the focus of the Chinaplas presentation by Demag Plastics Machinery (Ningbo) Press release 18 April 2012 Two modular standard machines from 500 to 10,000 kn at the trade show in Shanghai Extended Systec C machine series in the focus of the Chinaplas presentation by Demag Plastics

More information

Get a grip on inserts. ENGEL insert

Get a grip on inserts. ENGEL insert Get a grip on inserts. ENGEL insert be the first. The right combination. ENGEL insert. n many challenges, teamwork is the key to success. This is the case where a number of people are working towards a

More information

PRESS RELEASE (long version)

PRESS RELEASE (long version) PRESS RELEASE (long version) Shanghai, 27 November 2018 2018 Bauma China: DEUTZ presents superior China 4 ready engine technology DEUTZ diesel and gas engines ready for the new China 4 emissions standard

More information

ZF posts record sales in 2017; announces increased research and development activities

ZF posts record sales in 2017; announces increased research and development activities Page 1/5, March 22, 2018 ZF posts record sales in 2017; announces increased research and development activities ZF chief executive officer announces further expansion of research and development activities

More information

Zhafir Venus II Series. Zhafir Venus. Series

Zhafir Venus II Series. Zhafir Venus. Series Zhafir Venus II Series Zhafir Venus Series An outstanding success story Zhafir Venus II SerieS During the last years of the introduction phase of the Venus Series, it has without question earned the respect

More information

Hot Runner Solutions for Technical Moulding. An Introduction to Mastip Technology.

Hot Runner Solutions for Technical Moulding. An Introduction to Mastip Technology. Hot Runner Solutions for Technical Moulding An Introduction to Mastip Technology www.mastip.com Company Profile Mastip is a leading supplier of innovative hot runner solutions to the global plastic injection

More information

The 15th Shanghai International Automobile Industry Exhibition is. The 15th Shanghai International Automobile Industry Exhibition (Auto

The 15th Shanghai International Automobile Industry Exhibition is. The 15th Shanghai International Automobile Industry Exhibition (Auto The 15th Shanghai International Automobile Industry Exhibition is finished successfully The 15th Shanghai International Automobile Industry Exhibition (Auto Shanghai 2013) with the tagline "Innovation

More information

Contoured Infrared Contoured Infrared Technology

Contoured Infrared Contoured Infrared Technology Contoured Infrared Contoured Infrared Technology Non Contact Plastic Welding for Particulate-free and Aesthetically Clean Joints Proven to Deliver Exceptional Aesthetics and Superior Performance Important

More information

Aisin Group unveils three new transmissions at NAIAS

Aisin Group unveils three new transmissions at NAIAS Aisin Group unveils three new transmissions at NAIAS Top 10 Tier One supplier uses world stage (and two exhibits) to show transmission, autonomous vehicle, and personal mobility tech For Immediate Release

More information

The Next Reliable Choice. Moulded Case Circuit Breaker

The Next Reliable Choice. Moulded Case Circuit Breaker The Next Reliable Choice Moulded Case Circuit Breaker Founded in 1984, CHINT Group is a leader in Chinese industrial electric appliance and new energy sectors. With total assets of 36.5 billion RMB and

More information

More fuel efficiency with improved performance and comfort Bosch Rexroth presents efficient hydraulics solutions at bauma 2013

More fuel efficiency with improved performance and comfort Bosch Rexroth presents efficient hydraulics solutions at bauma 2013 More fuel efficiency with improved performance and comfort Bosch Rexroth presents efficient hydraulics solutions at bauma 2013 Continued volatility expected in the construction machinery market High demand

More information

Speech Prof. Dr.-Ing. Ulrich Hackenberg. Audi Press Conference International CES, Las Vegas

Speech Prof. Dr.-Ing. Ulrich Hackenberg. Audi Press Conference International CES, Las Vegas Speech Prof. Dr.-Ing. Ulrich Hackenberg Audi Press Conference International CES, Las Vegas January 7, 2014 Prof. Dr.-Ing. Ulrich Hackenberg Board Member for Technical Development, AUDI AG Check against

More information

ZF shows the latest innovations of the wind industry at the Hanover Fair 2015

ZF shows the latest innovations of the wind industry at the Hanover Fair 2015 Page 1/5, February 3, 2015 ZF shows the latest innovations of the wind industry at the Hanover Fair 2015 With innovative wind turbine gearboxes in the power range from 1.5 MW to 6.15 MW, ZF Wind Power

More information

The Next Reliable Choice. Modular Din Rail Product

The Next Reliable Choice. Modular Din Rail Product The Next Reliable Choice Modular Din Rail Product Founded in 1984, CHINT Group is a leader in Chinese industrial electric appliance and new energy sectors. With total assets of 36.5 billion RMB and nearly

More information

productronica adds robotics to exhibition portfolio

productronica adds robotics to exhibition portfolio Weltleitmesse für Entwicklung und Fertigung von Elektronik. 10. 13. November 2015, Messe München World s leading trade fair for electronics development and production. November 10 13, 2015, Messe München,

More information

Dunkermotoren VENETIAN BLIND DRIVES

Dunkermotoren VENETIAN BLIND DRIVES Dunkermotoren VENETIAN BLIND DRIVES Your Partner for accuracy, compact and high efficient motion solutions. Synergy effects through:» Quick availability of samples and prototypes» Qualified systems for

More information

ENERGY STORAGE. Lithium-Ion Batteries Production Equipment. for battery cells and complete battery systems

ENERGY STORAGE. Lithium-Ion Batteries Production Equipment. for battery cells and complete battery systems ENERGY STORAGE Lithium-Ion Batteries Production Equipment for battery cells and complete battery systems 2 PRODUCTION SOLUTIONS FOR Lithium-ION BATTERIES MANZ AG MANZ AG PRODUCTION SOLUTIONS FOR LITHIUM-ION

More information

BASF s Polyurethanes Division Driving efficiency, comfort and sustainability

BASF s Polyurethanes Division Driving efficiency, comfort and sustainability Raimar Jahn President Polyurethanes Division September 5, 2012 BASF s Polyurethanes Division Driving efficiency, comfort and sustainability Polyurethanes a strategic fit for BASF BASF Group sales 2011

More information

ZF Industrial Drives Always The Right Drive Solution

ZF Industrial Drives Always The Right Drive Solution Page 1/5, March 07, 2017 ZF Industrial Drives Always The Right Drive Solution Precise and reliable: ZF drive solutions for mechanical and plant engineering Innovative and competitive: ZF special driveline

More information

YOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES

YOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES YOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES GEARBOXES AND DRIVE PACKAGES FOR EXTRUSION, COMPOUNDING AND INJECTION MOLDING MACHINES Sponges, PVC pipes, colored granules, profi le of high performance

More information

Q&A. Paul Cooke, Managing Director of Bosch Rexroth Ltd. answers questions on the future of the Fluid Power Industry.

Q&A. Paul Cooke, Managing Director of Bosch Rexroth Ltd. answers questions on the future of the Fluid Power Industry. Paul Cooke, Managing Director of Bosch Rexroth Ltd. answers questions on the future of the Fluid Power Industry. 1) In your view, what are the current key talking points areas (eg. areas of innovation

More information

e-win ELECTRIC, EFFICIENT, COMPACT & PRECISE

e-win ELECTRIC, EFFICIENT, COMPACT & PRECISE ewin ELECTRIC, EFFICIENT, COMPACT & PRECISE WINTEC A MEMBER OF THE ENGEL GROUP WINTEC A STRONG PARTNER NEARBY Based in Changzhou (Jiangsu Province), WINTEC is your reliable partner when it comes to economic

More information

Electrification is taking combustion engines to new heights

Electrification is taking combustion engines to new heights Electrification is taking combustion engines to new heights Dr. Rolf Bulander Member of the board of management of Robert Bosch GmbH Chairman of the Mobility Solutions business sector 1 Megatrends are

More information

Hydraulics for high-quality deep-drawn parts

Hydraulics for high-quality deep-drawn parts White Paper Key Messages Hydraulics for high-quality deep-drawn parts Susanne Kircher Moog Marketing Communications Specialist Die cushion requirements are becoming more demanding and complex Precise analysis,

More information

Systems. Intelligent. Power & Control. Würth Elektronik ICS. Solutions and technologies for:

Systems. Intelligent. Power & Control. Würth Elektronik ICS. Solutions and technologies for: Würth Elektronik ICS Solutions and technologies for: Intelligent Power management Signal transmission Control Display and input Plug connections Power & Control Systems Würth Elektronik ICS The Würth Group

More information

Continuity in internationalization: BOGE Rubber & Plastics on track for further growth

Continuity in internationalization: BOGE Rubber & Plastics on track for further growth Page 1/6, 28.04.2017 Automotive supplier reports record sales Continuity in internationalization: BOGE Rubber & Plastics on track for further growth Sales grew by 3.2 percent to EUR 763.4 million in 2016

More information

Oerlikon Graziano and its success in the zero emission market

Oerlikon Graziano and its success in the zero emission market Press Release Oerlikon Graziano at EVS24 (Stavanger - Norway) 13 16 May 2009 Oerlikon Graziano and its success in the zero emission market Stavanger (Norway), May 13, 2009 Oerlikon Graziano, part of the

More information

BASF s Performance Polymers Delivering sustainable value

BASF s Performance Polymers Delivering sustainable value BASF s Delivering sustainable value Wolfgang Hapke President Performance Polymers Division September 5, 2012 A strategic fit for BASF BASF Group sales 2011 Oil & Gas 16% Other 9% Chemicals 18% Agricultural

More information

Shanghai Everbright Convention & Exhibition Center ( 88 Caobao Road,Shanghai, China )

Shanghai Everbright Convention & Exhibition Center ( 88 Caobao Road,Shanghai, China ) The 21 st China (International) Small Motor Technology Exhibition The 17th China (International) Magnetic Materials Technology Conference Exhibition Date November 9~11, 2016 Show Place Shanghai Everbright

More information

Transportation. Actuators, Pedals and Sensors

Transportation. Actuators, Pedals and Sensors Transportation Actuators, Pedals and Sensors Your Partner in Smart Solutions CTS Corporation is a global manufacturer of sensors, actuators and electronic components. Having served the automotive industry

More information

alpha Components & Systems Low backlash planetary gearheads Servo right-angle gearheads Mechanical systems

alpha Components & Systems Low backlash planetary gearheads Servo right-angle gearheads Mechanical systems alpha Components & Systems Low backlash planetary gearheads Servo right-angle gearheads Mechanical systems Competence in many sectors alpha Machine tools and manufacturing systems Maximum precision, process

More information

Mitsubishi Electric and Robotronic present highly compact handling solution for ready-to-use syringes

Mitsubishi Electric and Robotronic present highly compact handling solution for ready-to-use syringes Handling syringes on a minimal footprint Mitsubishi Electric and Robotronic present highly compact handling solution for ready-to-use syringes Stuttgart/Ratingen, 6 th October 2014 At Motek trade fair

More information

Oerlikon Graziano and Oerlikon Fairfield consolidate their presence in the Chinese Market

Oerlikon Graziano and Oerlikon Fairfield consolidate their presence in the Chinese Market Press Release Oerlikon Graziano and Oerlikon Fairfield at BAUMA CHINA (Shanghai) 25-28 November 2008 Oerlikon Graziano and Oerlikon Fairfield consolidate their presence in the Chinese Market Shanghai (China),

More information

Everything under control Thanks to reliable power grids

Everything under control Thanks to reliable power grids Power generation Power transmission, power distribution and smart grid Energy application Imaging and in-vitro diagnostics Everything under control Thanks to reliable power grids Brazil s social and economic

More information

Chain drive components. Perfectly linked for your success.

Chain drive components. Perfectly linked for your success. Chain drive components. Perfectly linked for your success. The content of this brochure is not legally binding and is solely intended for information purposes. Where legally permissible, all liability

More information

More power to manufacturers. Improving electric vehicle production processes

More power to manufacturers. Improving electric vehicle production processes More power to manufacturers Improving electric vehicle production processes of the automotive powertrain The continuing story of innovation in the automotive industry shows no sign of coming to an end.

More information

Hearing aid batteries the entire product range 2018/2019

Hearing aid batteries the entire product range 2018/2019 Hearing aid batteries the entire product range 2018/2019 high level hearing stands for Innovative battery and production technology Best product quality Sustainable environmental protection Unique and

More information

Press release. Avance Industrial S.A. de C.V. with three machines at Plastimagen 2013 in Mexico City. 27th March 2013

Press release. Avance Industrial S.A. de C.V. with three machines at Plastimagen 2013 in Mexico City. 27th March 2013 Press release 27th March 2013 Avance Industrial exhibits packaging applications and efficient standard injection moulding Avance Industrial S.A. de C.V. with three machines at Plastimagen 2013 in Mexico

More information

The High-Speed Benchmark. El-Exis SP. Maximum performance - Highest output

The High-Speed Benchmark. El-Exis SP. Maximum performance - Highest output The High-Speed Benchmark El-Exis SP. Maximum performance - Highest output THE HIGH-SPEED BENCHMARK El-Exis SP 03 El-Exis SP The best combination for the fastest applications. For more than 25 years, Sumitomo

More information

alpha Value Line Individual Talents Efficient Flexible Reliable

alpha Value Line Individual Talents Efficient Flexible Reliable alpha Value Line Individual Talents Efficient Flexible Reliable WITTENSTEIN alpha adapted for any axis The perfect drive solution for every requirement WITTENSTEIN alpha develops complete, single-supplier

More information

Dunkermotoren SOLAR WIND POWER

Dunkermotoren SOLAR WIND POWER Dunkermotoren SOLAR WIND POWER Your Partner for accuracy, compact and high efficient motion solutions. Synergy effects through:» Quick availability of samples and prototypes» Qualified systems for your

More information

Klaus Fröhlich Member of the Board of Management of BMW AG, Development. Oliver Zipse Member of the Board of Management of BMW AG, Production

Klaus Fröhlich Member of the Board of Management of BMW AG, Development. Oliver Zipse Member of the Board of Management of BMW AG, Production Media Information - Check against delivery - Klaus Fröhlich Member of the Board of Management of BMW AG, Development Oliver Zipse Member of the Board of Management of BMW AG, Production BMW Group Press

More information

Light Bearings for Innovation

Light Bearings for Innovation Light Bearings for Innovation The first catalogue for Wire Race Bearings, dating from 1949. The idea The precision and surface of the raceways are crucial in defining the function and performance of bearings.

More information

High performance S1S hydraulic seals. Providing a longer and more reliable life-cycle for hydraulic cylinders

High performance S1S hydraulic seals. Providing a longer and more reliable life-cycle for hydraulic cylinders High performance S1S hydraulic seals Providing a longer and more reliable life-cycle for hydraulic cylinders A leader in sealing technology Reduced leakage and friction, together with a long and reliable

More information

technologies Engel offers a full range of versatile machines for flexible applications The ENGEL elast series of rubber injection moulding machines

technologies Engel offers a full range of versatile machines for flexible applications The ENGEL elast series of rubber injection moulding machines > Series ENGEL victory ENGEL e-motion ENGEL e-max ENGEL duo ENGEL speed ENGEL combimelt ENGEL insert ENGEL elast / Lim ENGEL PETsystems Integrative technology ENGEL robot ENGEL control Services ENGEL training

More information

Automechanika 2018: ZF Aftermarket Presents Innovative Portfolio and Infotainment in Hall 3

Automechanika 2018: ZF Aftermarket Presents Innovative Portfolio and Infotainment in Hall 3 Page 1/5, 2018-07-11 Automechanika 2018: Presents Innovative Portfolio and Infotainment in Hall 3 A clear focus on smart solutions and innovative technology Hybrid technology with the VOX Car Doctors in

More information

Drive Change for Future Success

Drive Change for Future Success Drive Change for Future Success Werner Auer, Siemens VAI Siemens VAI Metals Technologies Business Segments Metals Technologies W. Auer (CEO) M. Krauss (CFO) Headquarter Mining (MI) Ironmaking (IR) Steel

More information

Weight-Saving ZF Technology for the Chassis

Weight-Saving ZF Technology for the Chassis Page 1/6, 2015-01-12 Weight-Saving ZF Technology for the Chassis Alternative materials as well as new designs and production methods save weight ZF has been manufacturing lightweight components in volume

More information

Application Alley. Smart World Sensors. Magnetically Based Sensors in a Smart World (GMR, Reed, Hall, etc.) PARTNER SOLVE DELIVER

Application Alley. Smart World Sensors. Magnetically Based Sensors in a Smart World (GMR, Reed, Hall, etc.) PARTNER SOLVE DELIVER Application Alley PARTNER Magnetically Based Sensors in a Smart World (GMR, Reed, Hall, etc.) SOLVE DELIVER The ability to monitor the status of almost anything in real time using new remotely addressable

More information

PRESENTING: YOUR COUPLING EXPERTS

PRESENTING: YOUR COUPLING EXPERTS PRESENTING: YOUR COUPLING EXPERTS R+W PRODUCT OVERVIEW RW-COUPLINGS.COM THE COUPLING. WHO WE ARE R+W: A SCHOOL OF EXPERTS. Our school of experts, since the founding of R+W Coupling Technology in 1990,

More information

Start of Volume Production: New Generation of the ZF 8-Speed Automatic Transmission in the BMW 5 Series

Start of Volume Production: New Generation of the ZF 8-Speed Automatic Transmission in the BMW 5 Series Page 1/5, 2015-04-20 Start of Volume Production: New Generation of the ZF 8-Speed Automatic Transmission in the BMW 5 Series Further savings potential of up to three percent Focus of developers: Reducing

More information

Technical Trends of Electric Power Steering Systems

Technical Trends of Electric Power Steering Systems Technical Trends of Electric Power Steering Systems W. IJIRI T. TSUTSUI Koyo has provided electric power steering systems (hereafter EPS) into market for more than 10 years and recently EPS has been widely

More information

for Brake Hoses and Industrial Hoses Performance Rayon Reinforcement

for Brake Hoses and Industrial Hoses Performance Rayon Reinforcement for Brake Hoses and Industrial Hoses Performance Rayon Reinforcement Safety is key Among the many challenging demands placed by consumers on today s automobiles, safety is definitely a core topic. When

More information

Indian engineering TRANSFORMING TRANSMISSION

Indian engineering TRANSFORMING TRANSMISSION Indian engineering TRANSFORMING TRANSMISSION A 2016 NASA photo of India s electrification. India to become the world s first country to use LEDs for all its lighting needs by 2019 (photograph courtesy

More information

Kiekert AG Corporate Information A company overview

Kiekert AG Corporate Information A company overview Kiekert AG Corporate Information A company overview Expected total turnover 2017: 880 million Euro Number of employees: 6,500 Production locations: 8: Germany, Czech Republic, Korea, USA, Mexico, China,

More information

Shenzhen International Lithium Battery Technology Exhibition 2018

Shenzhen International Lithium Battery Technology Exhibition 2018 Shenzhen International Lithium Battery Technology Exhibition 2018 Shenzhen International Lithium Battery Summit China Lithium Battery Industry Branding Ceremony 10 th -12 th December,2018 Shenzhen Convention

More information

Modular Multilevel Submodules for Converters, from the State of the Art to Future Trends

Modular Multilevel Submodules for Converters, from the State of the Art to Future Trends Modular Multilevel Submodules for Converters, from the State of the Art to Future Trends 1) ; Otto Kreutzer 2) ; Martin Nagelmüller 3) 1) Fraunhofer Institute of Integrated Systems and Device Technology

More information

Gated and assembled in one moulding cycle

Gated and assembled in one moulding cycle Customer information from EWIKON Heißkanalsysteme GmbH Gated and assembled in one moulding cycle Tailored hot runner solution for a demanding -component mould concept Pages - 5 Processing of sensitive

More information

BERNSTEIN Your partner in automobile production technology

BERNSTEIN Your partner in automobile production technology BERNSTEIN Your partner in automobile production technology Our knowledge is your success About us BERNSTEIN AG ranks among the world s leading providors of industrial safety technology. With our comprehensive

More information

PERCEUS. Production Package for PERC Solar Cells

PERCEUS. Production Package for PERC Solar Cells PERCEUS Production Package for PERC Solar Cells 02 PERCEUS Production Package for PERC Solar Cells. 1 LINEA II SINGULAR XP Laser Contact Opening Single Side Polish Etch Rear Side Passivation SDE/TEXTURE

More information

Expertise. Hydraulics. What you should know about us. excellent pressure solutions

Expertise. Hydraulics. What you should know about us. excellent pressure solutions Expertise Hydraulics What you should know about us excellent pressure solutions Welcome to Roth Hydraulics We develop and produce custom designed products and systems for fluid technology. Our core products

More information

-Shape the Future with Manufacturing Technology

-Shape the Future with Manufacturing Technology -Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany

More information

Vibration Control Solutions for Commercial Vehicles. Vibration Control

Vibration Control Solutions for Commercial Vehicles. Vibration Control Vibration Control Solutions for Commercial Vehicles Vibration Control Vibration Control 2 Powertrain Mounting Systems Components and modular systems for optimum safety and maximum riding comfort ContiTech

More information

Sealing out harsh environments. Liquid Silicone and Elastomer Technologies. Automotive Medical Industrial

Sealing out harsh environments. Liquid Silicone and Elastomer Technologies. Automotive Medical Industrial Sealing out harsh environments Liquid Silicone and Elastomer Technologies Automotive Medical Industrial Delphi Liquid Silicone and Elastomer Technologies Delphi s liquid silicone and elastomer technologies

More information

Fast growing markets / Special focus Asia

Fast growing markets / Special focus Asia Fast growing markets / Special focus Asia Market update Key market drivers Manufacturing footprint Engineering footprint Successful business Ulrich Selig Director, Automotive Asia Passenger car production

More information

Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T

Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN

More information

Active launch systems. For passenger cars up to 1,000 Nm

Active launch systems. For passenger cars up to 1,000 Nm Active launch systems For passenger cars up to 1,000 Nm 2 3 Powertrain components and systems for passenger cars and LCV Performance comfort environmental protection. Powertrain components and systems

More information

Oerlikon Solar to create 1000 high-tech jobs by 2009

Oerlikon Solar to create 1000 high-tech jobs by 2009 Press release Federal Councillor Doris Leuthard opens Oerlikon Solar pilot line in Trübbach Oerlikon Solar to create 1000 high-tech jobs by 2009 Fully automated end-to-end pilot production facility opened

More information

Linear Systems Solutions Defining the Future with the Schaeffler Group

Linear Systems Solutions Defining the Future with the Schaeffler Group Linear Systems Solutions Defining the Future with the Schaeffler Group LINEAR ACTUATORS Linear Solutions Provider Part retrieval systems, palletizers, custom tool changers, and dispensing robots are a

More information

Tips & Technology For Bosch business partners

Tips & Technology For Bosch business partners Tips & Technology For Bosch business partners Current topics for successful workshops No. 12/2014 Gasoline Injection Fuel Injection Components Fuel injection has a long history. The Deutz gas engine factory

More information

Annual press conference on April 29, 2015 Press images

Annual press conference on April 29, 2015 Press images Annual press conference on April 29, 2015 Press images 1-RB-21093 Industry 4.0 focus on the user Bosch is on its way to becoming both lead provider and lead exponent in the area of connected production.

More information

BMW Group Corporate and Governmental Affairs

BMW Group Corporate and Governmental Affairs 3 November 2010 - Please check against delivery - Statement by Dr. Norbert Reithofer Chairman of the Board of Management of BMW AG 3 November 2010, 10:00 a.m. Good morning, Ladies and Gentlemen! The BMW

More information