Published by Siemens Industry, Inc. Siemens Industry, Inc Siemens Road Wendell, North Carolina 27591

Size: px

Start display at page:

Download "Published by Siemens Industry, Inc. Siemens Industry, Inc Siemens Road Wendell, North Carolina 27591"

Martin Hunt
6 years ago
Views:

Published by Siemens Industry, Inc. Siemens Industry, Inc. 7000 Siemens Rod Wendell, North Crolin 27591 For more informtion, plese contct our Customer Support Center. Phone: 1-800-347-6659 us.siemens.

1 Published by Siemens Industry, Inc. Siemens Industry, Inc Siemens Rod Wendell, North Crolin For more informtion, plese contct our Customer Support Center. Phone: us.siemens.com Order no. EMTS-B AUS Printed in U.S.A Siemens Industry Subject to chnges nd errors. The informtion given in this document only contins generl descriptions nd/or performnce fetures which my not lwys specificlly reflect those described, or which my undergo modifiction in the course of further development of the products. The requested performnce fetures re binding only when they re expressly greed upon in the concluded contrct.

2 Medium-Voltge Products nd Services From 5kV to 38kV us.siemens.com/ssetservices

3 Product support for new nd legcy equipment, retrofit solutions, nd replcement circuit brekers for most OEM brnds. As the supplier of OEM prts for your Allis-Chlmers nd Siemens medium-voltge switchger nd brekers, Siemens is committed to supporting you with qulified prts nd fctory trined field service support throughout your products life cycle. Siemens hs comprehensive dtbse of drwings nd mnufcturing cpbilities to fbricte direct mtch. We design nd mnufcture ll interfces nd extensions, including bus work nd protection nd control pnels. Siemens fctory-trined field service technicins will work with you to instll, connect, test, nd commission the switchger nd mtch-in-line extension. Medium-Voltge Vcuum Replcement Contctors Medium-voltge vcuum replcement contctors provide cost-effective wy to upgrde your system cpbilities to current vcuum technology while incresing equipment relibility nd minimizing downtime. Siemens supports the Series controller product line nd cn provide replcement solutions for most 85H, 88H, 90H, 93H, 94H, 96H, 97H, nd 98H contctor models. Supporting New switchger bosting the ltest technology Medium-voltge motor controllers 5kV to 15kV Add-on sections for legcy switchger Replcement prts Replcement circuit brekers Replcement contctors Ground nd test devices MV nd LV circuit brekers to replce most brnds Closed door rcking solutions Trining onsite or t our fctory Service on medium- nd low-voltge products Protection nd control service nd products

4 Support Cpbilities Outdoor Distribution Circuit Brekers Brnd/Type Model Opertor Siemens (Vcuum) Spre Prts Replcement Vcuum Brekers Current Avilbility Add-on Sections Field Service Trining SDV 7 3AH N/A N/A SDV 6 3AH N/A N/A SDV 5 3AH N/A N/A SDV 4 GMI N/A N/A SDV 3 GMI N/A N/A SDV 2 3AF N/A N/A SDV1 3AF N/A N/A AIS (Air-Insulted) Switchger Brnd/Type Model Opertor Siemens (Vcuum) Spre Prts Replcement Circuit Brekers Add-on Sections Current Avilbility Closed Door Rcking Solutions Field Service Trining GM-SG 3AH GM GMI H2 3AF NXAIR 3AF MA MC/MCV Allis-Chlmers FA Limited (All Air-Mgnetic) FB Limited FC Limited VV v Limited IV Ger (Oil) I Ger F Ger D Ger R Ger ME Ger L Ger H Ger GIS (Gs-Insulted) Switchger Brnd/Type Model Opertor Siemens (GIS) Spre Prts Current Avilbility Add-on Modules Field Service Trining 8DA/B 8D 8DAJH 8D MVC (Medium-Voltge Control Centers) Brnd/Type Model Opertor Siemens (Vcuum) Spre Prts Replcement Vcuum Contctor Current Avilbility Add-on Sections Field Service Trining Simovc 3TL 97H * Trnsition to Simovc 98H * Trnsition to Simovc 88H * Trnsition to Simovc Series H * Trnsition to Simovc 90H * Trnsition to Simovc 93H * Trnsition to Simovc 94H * Trnsition to Simovc 96H * Trnsition to Simovc * Cell conversion kits re often needed to fit new contctor into n old cell.

Siemens Technology Protection nd Control Upgrdes Mny electric system opertors need to modernize their protection nd control systems in existing fcilities.

Siemens cn replce old relys with new SIPROTEC relys in the existing pnels, or we cn fbricte new pnels.

5 Siemens Technology Protection nd Control Upgrdes Mny electric system opertors need to modernize their protection nd control systems in existing fcilities. Siemens SIPROTEC relys offer protection nd control for trnsmission, genertion, distribution, nd industril pplictions. Siemens cn replce old relys with new SIPROTEC relys in the existing pnels, or we cn fbricte new pnels. Siemens lso provides the necessry engineering, documenttion, rely settings, commissioning nd ftermrket services to keep your equipment performing relibly nd sfely long fter the equipment hs been put in service. OEM-certified Prts nd Components Siemens mintins multi-million-dollr inventory for rpid supply of mny key components. Siemens supports not only current production products, but lso legcy medium-voltge nd high-voltge products (Allis-Chlmers, Siemens-Allis, Westinghouse, Merlin Gerin high-voltge products, Trfo Union, VA Tech, Elin, EBG, ETG, Peebles, nd Ferrnti-Pckrd). Opertimg Mechmisms The 3AF/3AH mechnism comes equipped with spring chrge motor mechnism, which includes lifetime lubricted ger box. Additionlly, its superior construction includes roller berings, bushings, nd mchined ltches nd cms. 3AF Opertor 3AH Opertor Used In SDV1, SDV2, H2, NXAIR Used In All Siemens MV Replcement Brekers, GMSG nd SDV 5,6,7 Spre Prts Are redily vilble Spre Prts Are redily vilble Mintennce Cycle 10,000 opertions Mintennce Cycle 10,000 opertions

The stored energy operting mechnism of the GMI circuit breker is n integrted rrngement of springs, solenoids nd mechnicl devices designed to provide number of criticl functions.

The closing springs re normlly chrged utomticlly, but there re provisions for mnul chrging. The operting mechnism tht controls chrging, closing, nd tripping functions is fully trip-free, i.e., spring chrging does not utomticlly chnge the position of the primry contcts, nd the closing function my be overridden by the tripping function t ny time.

6 The stored energy operting mechnism of the GMI circuit breker is n integrted rrngement of springs, solenoids nd mechnicl devices designed to provide number of criticl functions. The energy necessry to close nd open the contcts of the vcuum interrupters is stored in powerful tripping nd closing springs. The closing springs re normlly chrged utomticlly, but there re provisions for mnul chrging. The operting mechnism tht controls chrging, closing, nd tripping functions is fully trip-free, i.e., spring chrging does not utomticlly chnge the position of the primry contcts, nd the closing function my be overridden by the tripping function t ny time. GMI Opertor Vcuum Interrupters Siemens vcuum interrupters re mong the best in clss in short-circuit breking cpcity. They offer: 30,000 circuit-breker opertion cycles 5 million opertion cycles for contctors Mintennce-free service life Extremely high short-circuit breking cpcity High dielectric performnce Very low chopping currents Miniml contct resistnce Used in Spre Prts Mintennce Cycle SDV 3, SDV4, GM Are redily vilble 5,000 opertions Our portfolio offers predictble nd stble interruption over the entire product lifetime, even for extreme pplictions such s: Vibrting environments High nd low frequencies Horizontl or verticl instlltion In Siemens, you hve relible nd innovtive prtner with vst experience in vcuum switching technology: First ptent in the 1930s More thn 40 yers of in-depth mrket experience In-house contct mteril production More thn 5 million units instlled in different pplictions throughout the world Our vcuum interrupters re well estblished in ll industries, including: Power utilities Steel mills Wind turbines Shipping Off-shore Rilwy

MV Roll-in Replcements Roll-in replcement brekers provide cost-effective wy to upgrde to current vcuum technology while incresing equipment relibility nd minimizing downtime.

Incresed relibility nd performnce Reduced operting nd mintennce expenditures Reduced downtime, miniml chngeover time during upgrde Preserved investment in existing cubicles Improved employee nd

Long opertionl life Siemens replcement brekers hve n expected life of 30,000 mechnicl opertions nd mintennce intervl of 10 yers or 10,000 mechnicl opertions, which fr exceeds most opertionl

7 MV Roll-in Replcements Roll-in replcement brekers provide cost-effective wy to upgrde to current vcuum technology while incresing equipment relibility nd minimizing downtime. Siemens hs designs for most mjor breker models including: Why Replcement Brekers? Incresed relibility nd performnce Reduced operting nd mintennce expenditures Reduced downtime, miniml chngeover time during upgrde Preserved investment in existing cubicles Improved employee nd environmentl sfety Why Siemens? Long opertionl life Siemens replcement brekers hve n expected life of 30,000 mechnicl opertions nd mintennce intervl of 10 yers or 10,000 mechnicl opertions, which fr exceeds most opertionl requirements in industril nd utility pplictions. Siemens DHR (replcement for Westinghouse DH) Siemens GER (replcement for GE Mgne-Blst) The following circuit brekers re vilble s pre-engineered designs. Other mnufcturers, models, nd rtings cn be engineered by Siemens. Mnufcturer Model kv Rting MVA Amp Allis-Chlmers AM ,200, 2,000 (All Air-Mgnetic) 250 1,200, 2,000 MB/MBV ,200, 2, ,200, 2,000 MC/MCV , ,200, 2, ,200, 2,000 MA ,200, 2, ,200, 2,000 FA ,000 FB ,200, 2,000, 3,000 FC/FCV ,200, 2, ,200, 2,000, 3,000 1,000 1,200, 2,000, 3,000 Siemens 3AF (2-High) ,200, 2, ,200, 2,000, 3, ,200, 2,000, 3, ,200, 2, ,200, 2,000 1,000 1,200, 2,000, 3,000 GE Mgne-Blst (All Air-Mgnetic) (AMH) , 1,200, 2,000 Mgne-Blst (AM) , 1,200, 2, , 1,200, 2, , 1,200, 2, , 1,200, 2, , 1,200, 2, ,200, 2,000, 3, ,200, 2,000, 3, ,200, 2, ,200, 2, ,200, 2,000 1,000 1,200, 2,000, 3,000 Westinghouse DH ,200, 2, ,200, 2, , ,200, 2, ,200, 2, ,200, 2,000 1,000 1,200, 2,000, 3,000 DHP ,200, 2, ,200, 2, ,200, 2,000, 2, ,200, 2, , 750C 1,200, 2,000, 2,500 1,000 1,200, 2,000, 2,500 ITE HV , 1, , 1, , 1,200 HK ,200, 2, ,200, 2, ,200, 2, ,200, 2,000 1,000 (36 Cell) 1,200, 2,000 Federl Pcific DST * 1,200, 2, ,200, 2, ,200, 2, ,200, 2,000 MOP 27 1,000 1,200 McGrw Edison PSD , , ,200

Technology Improvements MOC Sver Siemens ptented MOC-Sver TM system ddresses the vrious opertionl issues ssocited with replcing ir-mgnetic circuit brekers.

The MOC-Sver provides positive MOC switch ctution in the Open nd Close directions. The MOC-Sver includes bi-directionl stored energy mechnism (snubber) nd bi-directionl hydrulic velocity controller.

8 Technology Improvements MOC Sver Siemens ptented MOC-Sver TM system ddresses the vrious opertionl issues ssocited with replcing ir-mgnetic circuit brekers. The MOC-Sver system controls the velocity operting the originl cubicle MOC system, thus mitigting the incresed forces tht would be pplied to the cubicle MOC system. The MOC-Sver provides positive MOC switch ctution in the Open nd Close directions. The MOC-Sver includes bi-directionl stored energy mechnism (snubber) nd bi-directionl hydrulic velocity controller. Opertion of the legcy MOC switches requires sufficient energy from the vcuum circuit breker stored energy mechnism to relibly close the circuit breker while not dmging the MOC system yet mintining full interchngebility. 52STA Actutor The 52STA ctutor originlly supplied with the legcy GE Mgn-Blst switchger ws designed to bsorb the output forces generted by the legcy circuit brekers stored energy mechnism nd protect the MOC switches. Unfortuntely, fter yers of use, the originl 52STA ctutor my develop tendency to bind nd not reset the MOC switches s required. This binding, long with the significnt force tht is generted in the stored energy mechnism of modern circuit brekers cn be problem for equipment owners. Fortuntely, Siemens hs developed replcement 52STA ctutor mechnisms to prevent potentil problems ssocited with these known issues nd incorported it in their replcement circuit brekers for legcy GE Mgne-Blst switchger in the US mrket. Bi-directionl velocity controller Bi-directionl spring snubber 52STA Actutor MOC Sver

Universl SARRACS Rcking Device Switchger Type Integrted Motorized Rcking Closed Door Modifiction Universl Rcking Device Remote SCADA Control GM-SG GM/GMI Allis-Chlmers D, F The universl rcking device

9 Universl SARRACS Rcking Device Switchger Type Integrted Motorized Rcking Closed Door Modifiction Universl Rcking Device Remote SCADA Control GM-SG GM/GMI Allis-Chlmers D, F The universl rcking device cn be used with most medium- nd low-voltge switchger mde by Siemens nd other OEMs. Unmtched control cpbilities The dvnced Siemens PLC provides the control required to limit dmge to the breker or cell tht cn be cused by equipment mislignment nd jmming. This llows for: Accurte detection of breker positions requiring high or low torque Precise position trcking nd movement monitoring to.001 in. Totl flexibility one unit cn tke on ny breker The breker memory cn be esily updted nytime breker is being rcked. Simply djust the elevtion of the motor crrige to lign the ger motor ssembly to the rcking mechnism on ny mnufcturer s breker Get your opertors up to speed in the shortest possible time, either t your fcility or t one of our trining centers, Siemens cn provide professionl trining to ensure sfe nd efficient SARRACS opertion. Mximize Sfety Using the touch screen on the portble opertor sttion, the rcking procedures cn be controlled from distnce of up to 75 ft. Stremlining the Process Improves Rcking Efficiency nd Reduces Downtime SARRACS shortens breker rcking times by s much s 50% over trditionl techniques. In ddition, it llows expenses for relted sfety equipment, including flsh suits, to be kept to minimum. SARRACS uses three-phse ger motor to provide the power needed for rcking, nd digitl encoder for precise position control nd sensing. An AC vrible-frequency drive opertes ll speed djustments, over current limits, nd rmp functions. Universl Rcking

Closed Door Modifiction Rcking In order to improve opertor sfety, Siemens offers field modifiction to convert Siemens switchger to closed-door, remote rck design.

Allis-Chlmers nd, lter, Siemens mnufctured types D nd F medium-voltge switchger from 1958 through the lte 1980s.

10 Closed Door Modifiction Rcking In order to improve opertor sfety, Siemens offers field modifiction to convert Siemens switchger to closed-door, remote rck design. This modifiction provides cost-effective solution to keep opertors cler of the rc flsh zone during breker rcking. Allis-Chlmers nd, lter, Siemens mnufctured types D nd F medium-voltge switchger from 1958 through the lte 1980s. This ger utilized ir-mgnetic brekers tht were typiclly mnully rcked vi lever while the cubicle pnel door ws open. The field modifiction consists of floor-mounted screw rcking device, nd breker-mounted brcket to interfce with the floor-mounted screw device. These dditions llow end-users to hve either closed-door mnul rcking or closed-door remote rcking. The closed-door remote rcking option requires the bove-mentioned cell nd breker dditions, s well s minor front pnel modifiction, to ccept torque-regulted motor. The motor cn be moved from one cell position to the next; thus, only one motor device is required. GM-SG Itegrted Electricl Rcking Siemens Integrted Electric-Rcking System (SIERS) provides dditionl personnel protection ginst rc-flsh exposure for opertors by providing mens of remotely rcking the drwout circuit breker for Siemens types GM-SG non-rc-resistnt 5kV-15kV, GM-SG-AR rc-resistnt 5kV-15kV nd GM38 non-rc-resistnt 38 kv switchger. SIERS delivers sfe, esy-to-use, cost-effective, relible, nd flexible wy to remotely rck drwout circuit breker while stnding outside of the rc-flsh zone. This reduces the need for personl protective equipment (PPE) per the NFPA-70E stndrd. Top view of rcking screw SIERS Type Bsic Locl HMI Remote SCADA Description Ech circuit breker cell is equipped with n integrted, electric-rcking system, which includes fixed-mounted, high torque motor nd logic control module, control-pendnt connector powered by control power in the switchger or n externl supply (either 120 Vc or 125 Vdc) when necessry. Typiclly, one control pendnt is supplied per lineup. Type SIERS integrted, electric-rcking system one per circuit breker cell Control pendnt one per lineup. Bsic type plus locl HMI pnel PC interfce with GM-SG, GM-SG-AR, or GM38 lineup(s) in the electricl room Bsic type plus custom interfce with SCADA or other system The universl rcking device cn be used with most medium- nd low-voltge switchger mde by Siemens nd other OEMs.

Low-Voltge Retrofit Circuit Brekers The following circuit brekers re vilble s pre-engineered designs. Other mnufcturers models nd rtings cn be engineered by Siemens by customer request.

11 Low-Voltge Retrofit Circuit Brekers The following circuit brekers re vilble s pre-engineered designs. Other mnufcturers models nd rtings cn be engineered by Siemens by customer request. Mnufcturer Siemens ABB/ITE Westinghouse GE Model RL, SB, LA2 K-Line DB, DS AK UL 1066 or 489, ANSI C37.13 Relible This highly engineered relible design offers incresed opertions nd the Extended Instntneous Protection (pt. pending) function llowing 100% of the full withstnd rting of the frme nd still providing the bility of the breker to be pplied up to the mximum Interrupting Rting. Highly ccurte internl Rogowski CTs llow for precision protection nd metering sving money on down time, field service, nd incresed customer stisfction. Sfe Sfety-relted fetures such s visible, redy-to-close indictor, customizble interlocking, nd mechnicl trip indiction offer pece-of-mind. Avilble Siemens Dynmic Arc Sentry (DAS) provides n rc flsh mitigtion mode tht reduces trip unit prmeters to lower the possible rc flsh energy. Esy to Use The ese of use from integrted rcking hndles, pull-prt front-mounted terminl blocks, nd simple selection nd ppliction tools reduces instlltion time nd errors, dds flexibility, nd minimizes trining. Speed of Delivery Locted in the United Sttes, our production fcility is positioned to deliver your retrofit brekers within your required timefrme needed. KLH 1600 Modulr & Flexible The modulrity nd flexibility of front-mounted common plug-in ccessories, field upgrdble trip units, nd field chngeble contcts nd rc chutes reduce inventory, llow for lst-minute dpttions, support quick-ship opportunities, forgive chnges, nd support the most cost-effective configurtion. Electronic or solid stte trip units re vilble, depending on your needs nd ppliction. Electronic trip units (ETUs) Power system protection is necessry to tret common types of bnorml occurrences, such s overlods or fults tht cn led to electricl power system filure. The methods for detecting nd clering such bnormlities nd restoring to norml opertion is n engineered technique. Adequte protection requires constnt mesurements of certin system quntities, such s voltges nd currents, compring those system quntities, or some combintion of the quntities, to threshold setting computed by systems engineer nd set into n electronic trip unit like those vilble on the WL brekers. It s eqully importnt for power system protection to perform under norml operting conditions. If the bove thresholds re set too low the power my be interrupted unnecessrily cusing loss of productivity or sfety provisions. The WL circuit breker offers prcticl mens of setting power system protection through vst selectivity vilble in its Electronic Trip Unit (ETU). WL ETUs hve wide rnge of protective settings for implementing simple or complex coordintion schemes nd configuring relible system protection.

12 Solid Stte Trip Units Siemens utilizes solid stte trip units for circuit brekers requiring sfety qulifiction for use in hrsh environments. These ruggedly constructed trip units re universlly comptible with ll Siemens Low-Voltge retrofit brekers designed for use in hrsh environments. They hve function selector switch tht llows the user to select between LSI, LI nd LS trip functions mking them verstile for use in coordintion schemes. Pickup nd time delys re set using rugged selection dils. Ground fult protection nd n rc flsh mitigting mintennce mode re vilble. A communictions interfce option is vilble tht provides dry contcts for number of outputs (Short Circuit, Overlod, Ground Fult, etc.) nd inputs (Remote Reset, Arc Flsh Mode, etc.). Low-voltge retrofit solutions feturing the Siemens WL opertor: Utilizing feture-rich electronic trip units Solid Stte trip units re vilble for Nucler 1E pplictions Designed nd built in the USA. KLW 1600 Electronic Trip Units Fetures nd Chrcteristics Solid Stte Trip Unit ETU745 ETU748 ETU776 Long-time overcurrent protection (L) Short-time delyed overcurrent protection (S) Instntneous overcurrent protection (I) Neutrl conductor protection (N) Ground fult protection O O Selectble neutrl protection Defetble short-time protection Defetble instntneous protection Selectble therml memory Zone selective interlocking Selectble I2t or fixed short-time dely Adjustble instntneous pickup Selectble I2t or I4t long-time dely Selectbel nd djustble neutrl protection Dul protective setting cpbility Dynmic rc-flsh Sentry (DAS) or Arc Flsh Mode Extended instntneous protection (EIP) Prmeteriztion by rotry switches Prmeteriztion by communiction (bsolute vlues) Prmeteriztion by menu/keypd (bsolute vlues) Remote prmeteriztion of the lrm functions Remote prmeteriztion of the rely functions Alph-numeric disply O O Grphicl disply Power metering function O O O Communiction vi PROFIBUS-DP O O O Communiction vi MODBUS O O O Communiction vi Ethernet (BDA) O O O Communiction vi dry contcts 0 Rted for hrsh environment pplictions () = stndrd feture, (o) = optionl

Siemens Industry, Inc Siemens Road Wendell, NC For more information, please contact our Customer Support Center. Phone:

Siemens Industry, Inc Siemens Road Wendell, NC For more information, please contact our Customer Support Center. Phone: Siemens Industry, Inc. 7000 Siemens Road Wendell, NC 27591 For more information, please contact our Customer Support Center. Phone: 1-800-333-7421 usa.siemens.com Order No: EMTS-B40018-00-4AUS Printed