mm mm mm (Height at the top of terminals) 14.4 kg
|
|
|
- Corey Maxwell
- 6 years ago
- Views:
Transcription
1 Battery Model: 25 Part Number: Nominal Voltage: 12 volts NSN: Number applied for, product currently available Battery Model: 35 Part Number: Nominal Voltage: 12 volts NSN: Number applied for, product currently available Physical Characteristics: Plate Design: High purity lead-tin alloy. Wound cell configuration utilizing proprietary SPIRALCELL technology. Electrolyte: Sulfuric acid, H 2 SO 4 Case: Polypropylene Color: Case: Dark Gray Cover: OPTIMA Red Group Size: BCI: 25 & 35 Standard Metric Length: Width: Height: Weight: lb mm mm mm (Height at the top of terminals) 14.4 kg Terminal Configuration: SAE / BCI automotive. Performance Data: Open Circuit Voltage (Fully charged): Internal Resistance (Fully charged): Capacity: Reserve Capacity: 12.8 volts.0030 ohms 44 Ah (C/20) BCI: 90 minutes (25 amp discharge, 80 F (26.7 C), to 10.5 volts cut-off) Power: CCA (BCI 0 F): MCA (BCI 32 F): 720 amps 910 amps
2 Recommended Charging: The following charging methods are recommended to ensure a long battery life: (Always use a voltage regulated charger with voltage limits set as described below.) Model: 25 and 35 These batteries are designed for engine starting applications. They are not recommended or warranted for use in deep cycle applications. Recommended Charging Information: Alternator: Battery Charger (Constant Voltage): Float Charge: Rapid Recharge: (Constant voltage charger) 13.3 to 15.0 volts 13.8 to 15.0 volts; 10 amps maximum; 6-12 hours approximate 13.2 to 13.8 volts; 1 amp maximum; (indefinite time at lower voltages) Maximum voltage 15.6 volts. No current limit as long as battery temperature remains below 125 F (51.7 C). Charge until current drops below 1 amp. All limits must be strictly adhered to. Recharge Time: (example assuming 100% discharge 10.5 volts) Current Approximate time to 90% charge 100 amps 35 minutes 50 amps 75 minutes 25 amps 140 minutes Recharge time will vary according to temperature and charger characteristics. When using Constant Voltage chargers, amperage will taper down as the battery becomes recharged. When amperage drops below 1 amp, the battery will be close to a full state of charge. (All charge recommendations assume an average room temperature of 77 F (25 C). Always wear safety glasses when working with batteries. Always use a voltage regulated battery charger with limits set to the above ratings. Overcharging can cause the safety valves to open and battery gases to escape, causing premature end of life. These gases are flammable! You cannot replace water in sealed batteries that have been overcharged. Any battery that becomes very hot while charging should be disconnected immediately. Not fully charging a battery can result in poor performance and a reduction in capacity.
3 Shipping and Transportation Information: OPTIMA batteries can be shipped by AIR. The battery is nonspillable and is tested according to ICAO Technical Instructions DOC AN/905 to meet the requirements of Packing Instructions No. 806 and is classified as non-regulated by IATA Special Provision A-48 and A-67 for UN2800. Terminals must be protected from short circuit. Manufacturing Location: Enertec Exports S. de R.L. de C.V. RFC: EEX020516KU2 Avenida. del Parque No Monterrey Technology Park Cienega de Flores, N.L MEXICO Phone: 52 (81) Fax: 52 (81) BCI = Battery Council International OPTIMA Batteries Product Specifications: Model 25 and 35 December 2008
4 Battery Model: 75/25 Part Number: Nominal Voltage: 12 volts NSN: Physical Characteristics: Plate Design: High purity lead-tin alloy. Wound cell configuration utilizing proprietary SPIRALCELL technology. Electrolyte: Sulfuric acid, H 2 SO 4 Case: Polypropylene Color: Case: Dark Gray Cover: OPTIMA Red Group Size: BCI: 75/25 Standard Metric Length: Width: Height: Weight: lb mm mm mm (Height at the top of terminals) 15.0 kg Terminal Configuration: SAE / BCI automotive and GM style side terminal (3/8-16UNC-2B threaded nut). Performance Data: Open Circuit Voltage (Fully charged): Internal Resistance (Fully charged): Capacity: Reserve Capacity: 12.8 volts.0030 ohms 44 Ah (C/20) BCI: 90 minutes (25 amp discharge, 80 F (26.7 C), to 10.5 volts cut-off) Power: CCA (BCI 0 F): MCA (BCI 32 F): 720 amps 910 amps Recommended Charging: The following charging methods are recommended to ensure a long battery life: (Always use a voltage regulated charger with voltage limits set as described below.) Model: 75/25 These batteries are designed for engine starting applications. They are not recommended or warranted for use in deep cycle applications.
5 Recommended Charging Information: Alternator: Battery Charger (Constant Voltage): Float Charge: Rapid Recharge: (Constant voltage charger) 13.3 to 15.0 volts 13.8 to 15.0 volts; 10 amps maximum; 6-12 hours approximate 13.2 to 13.8 volts; 1 amp maximum; (indefinite time at lower voltages) Maximum voltage 15.6 volts. No current limit as long as battery temperature remains below 125 F (51.7 C). Charge until current drops below 1 amp. All limits must be strictly adhered to. Recharge Time: (example assuming 100% discharge 10.5 volts) Current Approximate time to 90% charge 100 amps 35 minutes 50 amps 75 minutes 25 amps 140 minutes Recharge time will vary according to temperature and charger characteristics. When using Constant Voltage chargers, amperage will taper down as the battery becomes recharged. When amperage drops below 1 amp, the battery will be close to a full state of charge. (All charge recommendations assume an average room temperature of 77 F (25 C). Always wear safety glasses when working with batteries. Always use a voltage regulated battery charger with limits set to the above ratings. Overcharging can cause the safety valves to open and battery gases to escape, causing premature end of life. These gases are flammable! You cannot replace water in sealed batteries that have been overcharged. Any battery that becomes very hot while charging should be disconnected immediately. Not fully charging a battery can result in poor performance and a reduction in capacity. Shipping and Transportation Information: OPTIMA batteries can be shipped by AIR. The battery is nonspillable and is tested according to ICAO Technical Instructions DOC AN/905 to meet the requirements of Packing Instructions No. 806 and is classified as non-regulated by IATA Special Provision A-48 and A-67 for UN2800. Terminals must be protected from short circuit. Manufacturing Location: Enertec Exports S. de R.L. de C.V. RFC: EEX020516KU2 Avenida. del Parque No Monterrey Technology Park Cienega de Flores, N.L MEXICO Phone: 52 (81) Fax: 52 (81) BCI = Battery Council International OPTIMA Batteries Product Specifications: Model 75/25 December 2008
6 Battery Model: 34 Part Number: Nominal Voltage: 12 volts NSN: Battery Model: 34R Part Number: Nominal Voltage: 12 volts NSN: Physical Characteristics: Plate Design: High purity lead-tin alloy. Wound cell configuration utilizing proprietary SPIRALCELL technology. Electrolyte: Sulfuric acid, H 2 SO 4 Case: Polypropylene Color: Case: Dark Gray Cover: OPTIMA Red Group Size: BCI: 34 Standard Metric Length: Width: Height: Weight: lb mm mm mm (Height at the top of terminals) 17.2 kg Terminal Configuration: SAE / BCI automotive. Performance Data: Open Circuit Voltage (Fully charged): Internal Resistance (Fully charged): Capacity: Reserve Capacity: 12.8 volts.0030 ohms 50 Ah (C/20) BCI: 100 minutes (25 amp discharge, 80 F (26.7 C), to 10.5 volts cut-off) Power: CCA (BCI 0 F): MCA (BCI 32 F): 800 amps 1000 amps
7 Recommended Charging: The following charging methods are recommended to ensure a long battery life: (Always use a voltage regulated charger with voltage limits set as described below.) Model: 34 and 34R These batteries are designed for engine starting applications. They are not recommended or warranted for use in deep cycle applications. Recommended Charging Information: Alternator: Battery Charger (Constant Voltage): Float Charge: Rapid Recharge: (Constant voltage charger) 13.3 to 15.0 volts 13.8 to 15.0 volts; 10 amps maximum; 6-12 hours approximate 13.2 to 13.8 volts; 1 amp maximum; (indefinite time at lower voltages) Maximum voltage 15.6 volts. No current limit as long as battery temperature remains below 125 F (51.7 C). Charge until current drops below 1 amp. All limits must be strictly adhered to. Recharge Time: (example assuming 100% discharge 10.5 volts) Current Approximate time to 90% charge 100 amps 35 minutes 50 amps 75 minutes 25 amps 140 minutes Recharge time will vary according to temperature and charger characteristics. When using Constant Voltage chargers, amperage will taper down as the battery becomes recharged. When amperage drops below 1 amp, the battery will be close to a full state of charge. (All charge recommendations assume an average room temperature of 77 F (25 C). Always wear safety glasses when working with batteries. Always use a voltage regulated battery charger with limits set to the above ratings. Overcharging can cause the safety valves to open and battery gases to escape, causing premature end of life. These gases are flammable! You cannot replace water in sealed batteries that have been overcharged. Any battery that becomes very hot while charging should be disconnected immediately. Not fully charging a battery can result in poor performance and a reduction in capacity.
8 Shipping and Transportation Information: OPTIMA batteries can be shipped by AIR. The battery is nonspillable and is tested according to ICAO Technical Instructions DOC AN/905 to meet the requirements of Packing Instructions No. 806 and is classified as non-regulated by IATA Special Provision A-48 and A-67 for UN2800. Terminals must be protected from short circuit. Manufacturing Location: Enertec Exports S. de R.L. de C.V. RFC: EEX020516KU2 Avenida. del Parque No Monterrey Technology Park Cienega de Flores, N.L MEXICO Phone: 52 (81) Fax: 52 (81) BCI = Battery Council International OPTIMA Batteries Product Specifications: Model 34 and 34R December 2008
9 Battery Model: 34/78 Part Number: Nominal Voltage: 12 volts NSN: Physical Characteristics: Plate Design: High purity lead-tin alloy. Wound cell configuration utilizing proprietary SPIRALCELL technology. Electrolyte: Sulfuric acid, H 2 SO 4 Case: Polypropylene Color: Case: Dark Gray Cover: OPTIMA Red Group Size: BCI: 34/78 Standard Metric Length: Width: Height: Weight: lb mm mm mm (Height at the top of terminals) 17.6 kg Terminal Configuration: SAE / BCI automotive and GM style side terminal (3/8-16UNC-2B threaded nut). Performance Data: Open Circuit Voltage (Fully charged): Internal Resistance (Fully charged): Capacity: Reserve Capacity: 12.8 volts.0030 ohms 50 Ah (C/20) BCI: 100 minutes (25 amp discharge, 80 F (26.7 C), to 10.5 volts cut-off) Power: CCA (BCI 0 F): MCA (BCI 32 F): 800 amps 1000 amps Recommended Charging: The following charging methods are recommended to ensure a long battery life: (Always use a voltage regulated charger with voltage limits set as described below.) Model: 34/78 These batteries are designed for engine starting applications. They are not recommended or warranted for use in deep cycle applications.
10 Recommended Charging Information: Alternator: Battery Charger (Constant Voltage): Float Charge: Rapid Recharge: (Constant voltage charger) 13.3 to 15.0 volts 13.8 to 15.0 volts; 10 amps maximum; 6-12 hours approximate 13.2 to 13.8 volts; 1 amp maximum; (indefinite time at lower voltages) Maximum voltage 15.6 volts. No current limit as long as battery temperature remains below 125 F (51.7 C). Charge until current drops below 1 amp. All limits must be strictly adhered to. Recharge Time: (example assuming 100% discharge 10.5 volts) Current Approximate time to 90% charge 100 amps 35 minutes 50 amps 75 minutes 25 amps 140 minutes Recharge time will vary according to temperature and charger characteristics. When using Constant Voltage chargers, amperage will taper down as the battery becomes recharged. When amperage drops below 1 amp, the battery will be close to a full state of charge. (All charge recommendations assume an average room temperature of 77 F (25 C). Always wear safety glasses when working with batteries. Always use a voltage regulated battery charger with limits set to the above ratings. Overcharging can cause the safety valves to open and battery gases to escape, causing premature end of life. These gases are flammable! You cannot replace water in sealed batteries that have been overcharged. Any battery that becomes very hot while charging should be disconnected immediately. Not fully charging a battery can result in poor performance and a reduction in capacity. Shipping and Transportation Information: OPTIMA batteries can be shipped by AIR. The battery is nonspillable and is tested according to ICAO Technical Instructions DOC AN/905 to meet the requirements of Packing Instructions No. 806 and is classified as non-regulated by IATA Special Provision A-48 and A-67 for UN2800. Terminals must be protected from short circuit. Manufacturing Location: Enertec Exports S. de R.L. de C.V. RFC: EEX020516KU2 Avenida. del Parque No Monterrey Technology Park Cienega de Flores, N.L MEXICO Phone: 52 (81) Fax: 52 (81) BCI = Battery Council International OPTIMA Batteries Product Specifications: Model 34/78 December 2008
11 Battery Model: 6V Part Number: Nominal Voltage: 6 volts NSN: Physical Characteristics: Plate Design: High purity lead-tin alloy. Wound cell configuration utilizing proprietary SPIRALCELL technology. Electrolyte: Sulfuric acid, H 2 SO 4 Case: Polypropylene Color: Case: Dark Gray Cover: OPTIMA Red Group Size: BCI: N/A Standard Metric Length: Width: Height: Weight: lb mm mm mm (Height at the top of terminals) 8.4 kg Terminal Configuration: SAE / BCI automotive. Performance Data: Open Circuit Voltage (Fully charged): Internal Resistance (Fully charged): Capacity: Reserve Capacity: 6.4 volts.0019 ohms 50 Ah (C/20) BCI: 100 minutes Power: CCA (BCI 0 F): MCA (BCI 32 F): 800 amps 1000 amps Recommended Charging: The following charging methods are recommended to ensure a long battery life: (Always use a voltage regulated charger with voltage limits set as described below.) Model: 6V These batteries are designed for engine starting applications. They are not recommended or warranted for use in deep cycle applications.
12 Recommended Charging Information: Alternator: Battery Charger (Constant Voltage): Float Charge: Rapid Recharge: (Constant voltage charger) 6.65 to 7.5 volts 6.9 to 7.5 volts; 10 amps maximum; 6-12 hours approximate 6.6 to 6.9 volts; 1 amp maximum; (indefinite time at lower voltages) Maximum voltage 7.8 volts. No current limit as long as battery temperature remains below 125 F (51.7 C). Charge until current drops below 1 amp. All limits must be strictly adhered to. Recharge Time: (example assuming 100% discharge 5.5 volts) Current Approximate time to 90% charge 100 amps 35 minutes 50 amps 75 minutes 25 amps 140 minutes Recharge time will vary according to temperature and charger characteristics. When using Constant Voltage chargers, amperage will taper down as the battery becomes recharged. When amperage drops below 1 amp, the battery will be close to a full state of charge. (All charge recommendations assume an average room temperature of 77 F (25 C). Always wear safety glasses when working with batteries. Always use a voltage regulated battery charger with limits set to the above ratings. Overcharging can cause the safety valves to open and battery gases to escape, causing premature end of life. These gases are flammable! You cannot replace water in sealed batteries that have been overcharged. Any battery that becomes very hot while charging should be disconnected immediately. Not fully charging a battery can result in poor performance and a reduction in capacity. Shipping and Transportation Information: OPTIMA batteries can be shipped by AIR. The battery is nonspillable and is tested according to ICAO Technical Instructions DOC AN/905 to meet the requirements of Packing Instructions No. 806 and is classified as non-regulated by IATA Special Provision A-48 and A-67 for UN2800. Terminals must be protected from short circuit. Manufacturing Location: Enertec Exports S. de R.L. de C.V. RFC: EEX020516KU2 Avenida. del Parque No Monterrey Technology Park Cienega de Flores, N.L MEXICO Phone: 52 (81) Fax: 52 (81) BCI = Battery Council International OPTIMA Batteries Product Specifications: Model 6V January 2010
AgriCUltUre ConstrUCtion equipment generators emergency vehicles CleAning
agriculture construction EQUIPMENT generators emergency vehicles CLEANING OPTIMA YELLOWTOP DUAL PURPOSE BATTERY (STARTING & SEMI TRACTION) Up to 3 times quicker recharging Over 15 times more vibration
USER, s. k SULFURIC ACID CAN CAUSE BLINDNESS OR A DANGER/POISON SHIELD EYES EXPLOSIVE GASES CAN CAUSE BLINDNESS OR INJURY NO SPARKS, FLAMES, SMOKING
BATTERIES THE ULTIMATE POWER SOURCE" SPIRALCELL 0 TECHNOLOGY USER, s \ RECYCLE GU IDE Congratulations! You now own one of the world's most sophisticated batteries produced by the leaders in battery power
6 & 12 Volt Monobloc GEL Range
6 & 12 Volt Monobloc GEL Range Haze Battery Company Ltd Q The Haze HZY - GEL range covers Ah capacities from 7Ah to 230Ah (C10) with dimensions suitable for racking systems for maximum space utilisation.
Automotive/LTV. A guide to the industry s best starting and deep cycle battery
TM Automotive/LTV A guide to the industry s best starting and deep cycle battery Twice the overall power and three times the life of conventional automotive batteries. Up to 400 cycles at 80% depth of
/ Hydrometer Flame Arrestor Polypropylene Case Heat-Sealed Covers Low-Resistance Envelope Separators:
Flame Arrestor: explosions Prevents outside spark from causing Hydrometer: At full charge the electrolyte specific gravity is 1,280 while at 50% of charge considered the minimum servicable condition, the
Haze Battery Company Ltd. Sealed Lead Acid 6 & 12 Volt. Gelled Electrolyte Range. Monobloc
Haze Company Ltd Sealed Lead Acid 6 & 12 Volt Monobloc Gelled Electrolyte Range CONSTRUCTION - Gel battery construction is as shown in the diagram. The positive and negative grids are cast from a calcium/tin
Haze Battery Company Ltd. Sealed Lead Acid 6 & 12 Volt. AGM Range. Monobloc
Haze Battery Company Ltd Sealed Lead Acid 6 & 12 Volt Monobloc AGM Range CONSTRUCTION - AGM battery construction is as shown in the diagram below. The positive and negative grids are cast from a calcium
TOTALFLOW Technical Bulletin 59 Lead Acid Battery Inspection and Maintenance Procedures
TOTALFLOW Technical Bulletin 59 Lead Acid Battery Inspection and Maintenance Procedures Totalflow Technical Bulletin Version 1.0, Revision AC (8 January, 2001) \\isntsrv1\tffiles\documentation\techbulls\insert
Haze Battery Company Ltd
Haze Battery Company Ltd Sealed Lead Acid 6 & 12 Volt Monobloc Gelled Electrolyte Range CONSTRUCTION - Gel battery construction is as shown in the diagram. The positive and negative grids are cast from
EverExceed Spiral AGM Batteries
EverExceed Spiral AGM Batteries www.everexceed.com PURE LEAD SPIRAL AGM TECHNOLOGY! SUPER POWER! MAINTENANCE FREE! SUPER FAST CHARGING ABILITY! Up to 4.5CA quicker recharging 45 minutes recharge 95% No
Chapter 3. Direct Current Power. MElec-Ch3-1
Chapter 3 Direct Current Power MElec-Ch3-1 Overview Batteries Safety Precautions Marine Storage Battery Charging Systems Battery Utilization MElec-Ch3-2 Batteries Cells and Battery Battery Chemistry Primary
FEATURES & benefits. Constant Power Discharge Ratings - Watts per 77 F (25 F) Operating Time (in minutes) to 1.
-1029 Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications. APPLICATIONS Data Centers Network Operations Centers Industrial Process Control Facilities Internet Housing Sites Semiconductor
EXTREME POWER AND ENDURANCE
ENGINEERED WITH THIN PLATE PURE LEAD (TPPL) TECHNOLOGY EXTREME POWER AND ENDURANCE www.odysseybattery.com SERIES TM DRIVE IT TO EXTREMES Twice the overall power as conventional batteries! Doing double
6 & 12 Volt Monobloc. Haze Battery Company Ltd
6 & 12 Volt Monobloc Haze Battery Company Ltd The Haze HZB - AGM range covers Ah capacities from 18Ah to 230Ah (C10) with dimensions suitable for racking systems for maximum space utilisation. Specially
Haze Battery Company Ltd. Sealed Lead Acid 6 & 12 Volt. AGM Range. Monobloc
Haze Battery Company Ltd Sealed Lead Acid 6 & 12 Volt Monobloc AGM Range CONSTRUCTION - AGM battery construction is as shown in the diagram below. The positive and negative grids are cast from a calcium
PURE LEAD PLUS UPS APPLICATIONS. Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications Watts per Cell
UPS 12-1121 PURE LEAD PLUS Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications 305-545 Watts per APPLICATIONS Data Centers Network Operations Centers Industrial Process Control
MHR VRLA batteries are manufactured in compliance with TL, NEBS, GR, SR, IEC, BS, UL, ISO, OSHAS and CE quality and performance standards.
APPLICATIONS UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEMS COMMUNICATIONS DATA CENTERS ALTERNATIVE ENERGY The MHR Modular High Rate Valve Regulated Lead Acid batteries feature the latest advancement in plate
Deep Cycle Battery Safety. First. Battery Handling, Maintenance & Test Procedures
Deep Cycle Battery Safety. First. Battery Handling, Maintenance & Test Procedures Crown deep cycle batteries employ a low-maintenance design. They do require periodic maintenance and effective charging
12 VOLT AUTOMOTIVE AND LIGHT COMMERCIAL - FULL LINE
BCI GROUP SIZE BATTERY TYPE ITEM NO. CRANKING PERFORMANCE AMPS Douglas Battery Manufacturing Company 500 Battery Drive, P.O. Box 12159 Winston-Salem, NC 27117-2159 Corporate Offices 1-800-368-4527 Customer
PURE LEAD PLUS UPS APPLICATIONS Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications Watts per Cell
-11 PURE LEAD PLUS Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications 305-545 Watts per Cell FEATURES & benefits APPLICATIONS Data Centers Network Operations Centers Industrial
Battery Selection Guide
EP Battery Selection Guide Visit us at www.enersys.com RESERVE POWER Publication No: US-GPL-SG-AA January 2017 Contents Company Background EnerSys 2 Services and applications 3 Features and benefits 4
BATTERIES. Contents PRODUCT INFORMATION
PRODUCT INFORMATION 2017 BATTERIES Contents Battery Specification Chart...P-2 P-4 BCI/DIN/EN Reference Chart...P-5 Group Size Dimensions...P-6 Product Features... P-7 P-12 Glossary...P-13 P-14 Battery
OWNER S MANUAL THE BATTERY THAT GOES TO EXTREMES
OWNER S MANUAL THE BATTERY THAT GOES TO EXTREMES INTRODUCTION The ODYSSEY battery ingeniously uses absorbed glass mat (AGM) technology to offer, in one box, the characteristics of two separate batteries.
EXTREME POWER AND ENDURANCE
ENGINEERED WITH THIN PLATE PURE LEAD (TPPL) TECHNOLOGY EXTREME POWER AND ENDURANCE www.odysseybattery.com www.enersys.com SERIES TM DRIVE IT TO EXTREMES Up to twice the overall power of conventional batteries!
Haze Battery Company Ltd
Haze Battery Company Ltd Sealed Lead Acid AGM 6 & 12 Volt Monobloc Range 0.8 AH to AH RUBBISH BIN Applications LEAD RECYCLE Float service Uninterruptible Power Supplies Medical Telecounications Switch
12/24V 30A AUTOMATIC/MANUAL WORKSHOP BATTERY CHARGER
12/24V 30A AUTOMATIC/MANUAL WORKSHOP BATTERY CHARGER P/No. HDBC45 IMPORTANT SAFETY INFORMATION Please read this manual thoroughly before use and store in a safe place for future reference. WARNING Explosive
Technical Note. Management of Sealed Lead Acid Batteries in Reliable Small DC Standby Power Supply Systems
Technical Note Management of Sealed Lead Acid Batteries in Reliable Small DC Standby Power Supply Systems Automation Products Introduction As more and more remote monitoring is installed on sites ranging
EXTREME POWER AND ENDURANCE
OWNERS MANUAL ENGINEERED WITH THIN PLATE PURE LEAD (TPPL) TECHNOLOGY EXTREME POWER AND ENDURANCE www.odysseybattery.com INTRODUCTION The ODYSSEY battery ingeniously uses absorbed glass mat (AGM) technology
Battery Performance Specifications
Performance Specifications Features and Benefits range 105-2000Ah Lead-calcium alloy Valve regulated design with recombinant technology eliminates watering requirements Flame retardant polypropylene jar
EXTREME POWER AND ENDURANCE
E N G I N E E R E D W I T H T H I N P L AT E P U R E L E A D ( T P P L ) T E C H N O L O G Y EXTREME POWER AND ENDURANCE www.odysseybattery.com www.enersys-emea.com SERIES TM DRIVE IT TO EXTREMES Up to
EV Power - Battery Control Unit Instructions. 8 Cell 24V
EV Power - Battery Control Unit Instructions. 8 Cell 24V PAGE 1 OF 12 BCU-EVPPAK Features - Simple to install and use, microprocessor control. - Low power requirement, just 15mA when switched on with relay
Guidelines for Battery Electric Vehicles in the Underground
Guidelines for Battery Electric Vehicles in the Underground Energy Storage Systems Rich Zajkowski Energy Storage Safety & Compliance Eng. GE Transportation Agenda Terminology Let s Design a Battery System
Sealed Lead-Acid Batteries
Sealed Lead-Acid Batteries FEATURES Sealed/Maintenance-Free The valve regulated, spill-proof construction of the Power-Sonic battery allows trouble-free, safe operation in any position. There is no need
12V 160A/24V 185A MANUAL WORKSHOP BATTERY CHARGER
12V 160A/24V 185A MANUAL WORKSHOP BATTERY CHARGER P/No. HDBC200 IMPORTANT SAFETY INFORMATION Please read this manual thoroughly before use and store in a safe place for future reference. WARNING Explosive
Sealed Lead-Acid Batteries
Sealed Lead-Acid Batteries FEATURES Sealed/Maintenance-Free The valve regulated, spill-proof construction of the Power-Sonic battery allows trouble-free, safe operation in any position. There is no need
THE U.S. ARMY BATTERY MAINTENANCE MANAGEMENT PROGRAM BATTERY MAINTENANCE MANAGEMENT PROGRAM
THE U.S. ARMY BATTERY MAINTENANCE MANAGEMENT PROGRAM Presented by: PulseTech Products Corporation www.pulsetech.net Field Support: Roy Johnson 315-489-8823 rjohnson1@twcny.rr.com Eastern US, International,
Batteries, Alternators, and Chargers
FAMA BUYER S GUIDE TC035 Batteries, Alternators, and Chargers Prepared by the FAMA Electrical Subcommittee This guide does not endorse any manufacturer or product Page 1 of 8 Contents Introduction...3
COMPONENT MAINTENANCE MANUAL. LT-Valve-Regulated Lead-Acid Batteries. Part Numbers Applicable to this CMM LT P
LT-Valve-Regulated Lead-Acid Batteries Part Numbers Applicable to this CMM 7639-27 7639-30LT 7639-34 7638-36 7638-48P Q01-4000 Rev E September 3, 2014 CONTENTS Section Description Page 1 Revisions.. 1
TELEDYNE BATTERY PRODUCTS
TELEDYNE BATTERY PRODUCTS 7000 SERIES (LT) VALVE-REGULATED LEAD-ACID AIRCRAFT BATTERY SERVICE PROPOSITION 65 WARNING BATTERY POSTS, TERMINALS AND RELATED ACCESSORIES CONTAIN LEAD AND LEAD COMPOUNDS, CHEMICALS
Twice the overall power and three times the life of conventional marine batteries. Up to 400 cycles at 80% depth of discharge!
Twice the overall power and three times the life of conventional marine batteries. Up to 400 cycles at 80% depth of discharge! A guide to the industry s best starting and deep cycle battery Designed to
Engineered to take you to the red line and the finish line
Engineered to take you to the red line and the finish line Built to withstand the extremes of high performance pursuits! Constant pounding. Extreme heat. High-revving, high-vibration, powersapping engines.
AINO MICRO RANGE VRLA. Compact energy for increased security BATTERY SOLUTIONS. EverExceed power your applications
EverExceed power your applications Maintenance free VRLA design Leak proof / Spill proof Gas recombination Absorbed electrolyte Float / Cycle use Low self-discharge rate Reliable one-way safety valve Lead
Twice the overall power and three times the life of conventional marine batteries. Up to 400 cycles at 80% depth of discharge!
TM A guide to the industry s best starting and deep cycle battery Twice the overall power and three times the life of conventional marine batteries. Up to 400 cycles at 80% depth of discharge! Longer service
TERMINAL LAYOUTS PC310 PC370 PC535 PC545 PC625 PC680 PC925*** PC9 PC1100 PC1200*** PC1220 ENGINEERED WITH THIN PLATE PURE LEAD (TPPL) TECHNOLOGY 75-PC1230 75/86-PC1230 PC13 25-PC10 35-PC10 34-PC10 34R-PC10
COMPONENT MAINTENANCE MANUAL. LT-Valve-Regulated Lead-Acid Batteries. Part Numbers Applicable to this CMM LT P
LT-Valve-Regulated Lead-Acid Batteries Part Numbers Applicable to this CMM 7639-27 7639-30LT 7639-34 7638-36 7638-48P Q01-4000 Rev H May 3, 2017 CONTENTS Section Description Page 1 Revisions.. 1 2 Scope
Stays stronger. 2X the overall power and 3X the life. of conventional marine batteries.
Engineered with THIN PLATE PURE LEAD (TPPL) Technology Starts stronger. Stays stronger. 2X the overall power and 3X the life of conventional marine batteries www.odysseybattery.com Longer service life
APPLICATION MANUAL STARTING, LIGHTING & IGNITION (SLI) DRYCELL BATTERY GUIDE SIXTH EDITION
APPLICATION MANUAL STARTING, LIGHTING & IGNITION (SLI) DRYCELL BATTERY GUIDE SIXTH EDITION ODYSSEY Application Manual TABLE OF CONTENTS Preface to the Sixth Edition The addition of four new members to
OWNER S MANUAL THE BATTERY THAT GOES TO EXTREMES
OWNER S MANUAL THE BATTERY THAT GOES TO EXTREMES INTRODUCTION The ODYSSEY battery ingeniously uses absorbed glass mat (AGM) technology to offer, in one box, the characteristics of two separate batteries.
MAINTENANCE-FREE BATTERY CONSTRUCTION
MAINTENANCE-FREE BATTERY CONSTRUCTION INTRODUCTION A battery is formed when two chemically dissimilar plates, divided by a separator, are placed in a solution called electrolyte. In all automotive type
Haze Battery Company Ltd
Haze Battery Company Ltd Sealed Lead Acid 2 Volt Bloc Gelled Electrolyte Range CONSTRUCTION - Gel battery construction is as shown in the diagram. The positive and negative grids are cast from a calcium/tin
Applications. EMC tested
SOLAR Applications Photovoltaic power supply of: Power plants of remote villages Signal Installations of the air-, sea-, road and railway transport Radio relay stations of telecounication services Cellular
Power to keep you on the move
Power to keep you on the move Electric Vehicle Gel ELECTRIC VEHICLE applications are wide and varied with many durability & power demands placed firmly on the batteries shoulders. HAZE ELECTRIC VEHICLE
2006 MINI Cooper S GENINFO Battery - Overview - MINI
2002-07 GENINFO Battery - Overview - MINI MINI BATTERY MINI BATTERY Purpose of the Automotive Battery The battery is the primary Electromotive Force (EMF) source in the automobile. In addition the battery
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA RG-131
... the heart of your system. Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 27106 RG-131 24 VOLT Various Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY DECLARATION
PRODUCT GUIDE Publication No: EN-SBS-PG-001 February 2003
PRODUCT GUIDE Publication No: EN-SBS-PG-001 February 2003 Contents Introduction Introduction 2 Range Summary 3 Recombination Technology 4 Construction 5 Features and Benefits 6 Battery Sizing 7-8 Performance
UPS FEATURES & BENEFITS TECHNICAL DATA Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications.
41-9027 Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications. TECHNICAL DATA FEATURES & BENEFITS 10 year design life @ 25 C Absorbent Glass Mat (AGM) technology for efficient gas
Haze Battery Company Ltd. Sealed Lead Acid 2 Volt Bloc. Gelled Electrolyte Range
Haze Battery Company Ltd Sealed Lead Acid 2 Volt Bloc Gelled Electrolyte Range CONSTRUCTION - Gel battery construction is as shown in the diagram. The positive and negative grids are cast from a calcium/tin
2603 Battery Pal 3 AMP, 1 2 VOLT BATTERY CHARGER
R 2603 Battery Pal 3 AMP, 1 2 VOLT BATTERY CHARGER Connections at a glance: The GUEST Battery Pal 2603 is designed to recharge your battery, and extend your battery s life in applications where it is stored
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 27106
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 27106 RG-500 and RG-600 Series 24 VOLT 17 Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY DECLARATION OF DESIGN PERFORMANCE
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA RG-380E/44 Series
... the heart of your system. Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 27106 RG-380E/44 Series 24 VOLT 42.0 Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY USER
AGM / GEL BATTERY RANGE
AGM / GEL BATTERY RANGE Fullriver DC Series Batteries Fullriver DC Series Batteries Overview Fullriver deep-cycle AGM batteries are ideal for applications that require sealed batteries with a proven track
BK10 10 CHANNELS BANK CHARGER For 12V lead-acid batteries
BK10 10 CHANNELS BANK CHARGER For 12V lead-acid batteries DESIGNED FOR WORKSHOPS AND WAREHOUSES User Manual and Guide to professional battery charging for Starter and Deep Cycle batteries. THIS MANUAL
Known Worldwide as the Highest Quality AGM Batteries for Marine, RV and Industrial Applications
Known worldwide as the highest quality AGM batteries for Marine, RV and Industrial applications. Known Worldwide as the Highest Quality AGM Batteries for Marine, RV and Industrial Applications 28 PH: 1300
Deep Cycle AGM Range VRLA
01 DEEP CYCLE AGM RANGE 18Ah to 400Ah @ C20 SEALED MONOBLOC AGM BATTERIES The extremely powerful, compact AGM batteries of EverExceed Deep Cycle AGM Range are an ideal energy Source for durability in Photovoltaic,
Battery Range Summary
TM Specialty Battery Range Summary Since its introduction in the early 1990s, the Genesis Thin Plate Pure Lead (TPPL) battery has established itself as a premium high performance battery suitable for a
THE BATTERY THAT GOES TO EXTREMES
THE BATTERY THAT GOES TO EXTREMES EXTREME POWER. Phenomenal starting power and massive deep cycle reserve power in one battery! ODYSSEY batteries vs. spiral-wound designs: 15% more plate surface area!
Tubular Gel Technology For Solar Applications
Tubular Gel Technology For Solar Applications Website: www.hazebattery.com E mail : sales@hazebattery.com HAZE Tubular Gel Solar Range utilizes proven materials & construction technology tailored for the
Valve Regulated Lead Acid (VRLA) Battery Series Designed for UPS Standby Power Applications FEATURES & BENEFITS
12-1079 HIGH RATE MAX UPS 12-355MRF APPLICATIONS Data Centers Network Operations Centers Industrial Process Control Facilities Internet Housing Sites Semiconductor Manufacturing Banks & Financial Markets
EXTREME POWER AND ENDURANCE
ENGINEERED WITH THIN PLATE PURE LEAD (TPPL) TECHNOLOGY EXTREME POWER AND ENDURANCE www.odysseybattery.com SERIES TM DRIVE IT TO EXTREMES Twice the overall power as conventional batteries! Doing double
OBE, OBEXU, ON BOARD Battery Chargers
C O R P O R A T IO N O P E R A T I N G I N S T R U C T I O N S OBE, OBEXU, ON BOARD Battery Chargers INTRODUCTION: These chargers are designed for the permanent installation on battery powered vehicles
OPERATOR'S MANUAL IMPORTANT SAFETY INSTRUCTIONS
ASSOCIATED OPERATOR'S MANUAL IMPORTANT SAFETY INSTRUCTIONS MODEL 6366 12 VOLT, 0-20 AMP 4 X 20 BATTERY CHARGER 1. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions
FEATURES & BENEFITS. 10 year design 25 C
41-27 Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications. TECHNICAL DATA FEATURES & BENEFITS 10 year design life @ 25 C Absorbent Glass Mat (AGM) technology for efficient gas
Industrial Batteries Network Power Powerfit S500 High energy density for maximum security. Specifications
Industrial Batteries Network Power Powerfit S500 High energy density for maximum security. Specifications If cost efficiency and high performance are requested. Specifications Especially designed for safety
BATTERIES BATTERIES VRLA / SLA / GEL 2V/6V/12V. DP Electronics e.k (Deutsche Power Co., Limited)
BATTERIES BATTERIES VRLA / SLA / GEL 2V/6V/12V VRA / SLA BATTERIES AGM (2V, 12V Cell) Durable and Power Full Batteries A VRLA battery (valve-regulated lead-acid battery) more commonly known as a sealed
POWER TO GET THE JOB DONE
52722 10 AMP 12 VOLT BATTERY CHARGER OWNER S MANUAL OVERCHARGING PROTECTION 10 Amp, 12 Volt Fully automatic and manually selectable Includes overcharging protection in automatic mode Reverse hook-up protection
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 91790
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 91790 RG-380E/60 Series 24 VOLT 48 Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY DECLARATION OF DESIGN PERFORMANCE
AUTO CHARGE 3 STEP AUTOMATIC BATTERY CHARGER
INSTRUCTION MANUAL FILE: IM_091-120-XX-XX-(XXX)(XX)_revA.P65 REV: A REVISED BY: PSS DATE: 07-19-13 AUTO CHARGE 3 STEP AUTOMATIC BATTERY CHARGER R MODEL #091-120-XX-XX-(XXX)(XX) 3 YEAR WARRANTY 170 Cherry
Battery. Charger Model: Save Important Safety Instructions
Owner's Manual Battery Charger Model: SS-51A-PE, 10 Amp Fully Automatic Battery Charger For 12 Volt Marine Deep Cycle & Automotive Batteries Save Important Safety Instructions Read Rules for Safe Operation
BS20 BATTERY CHARGER For lead-acid batteries
BS20 BATTERY CHARGER For lead-acid batteries User Manual and Guide to professional battery charging for Starter and Deep Cycle batteries. THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS
The Traveler Series: Wanderer
The Traveler Series: Wanderer RENOGY 30A PWM Charge Controller Manual 2775 E. Philadelphia St., Ontario, CA 91761 1-800-330-8678 1 Version: 2.3 Important Safety Instructions Please save these instructions.
INSTRUCTION MANUAL CAUTION
FILE: IM_091-128-12E-40-115 Rev B., 2-16-2006 INSTRUCTION MANUAL AUTO CHARGE ODY q AUTOMATIC BATTERY CHARGER MODEL #091-128-12E-40-115 for ODYSSEY AGM BATTERIES CAUTION This charger is calibrated to the
/ Hydrometer Flame Arrestor Polypropylene Case Heat-Sealed Covers Low-Resistance Envelope Separators:
Flame Arrestor: explosions Prevents outside spark from causing Hydrometer: At full charge the electrolyte specific gravity is 1,280 while at 50% of charge considered the minimum servicable condition, the
SPECIFICATIONS LOW COST 2404R CHARGER
SPECIFICATIONS LOW COST 2404R CHARGER Totally Automatic Switch-Mode Battery Chargers "Suitable for Gel, Sealed & Wet Lead Acid Batteries" Summary: 24 Volts, 2 Amp Constant Current (Equivalent to 4A tapered
Digital Intelligent Battery Charger OPERARATOR S MANUAL
Digital Intelligent Battery Charger OPERARATOR S MANUAL WARNING! Before you install and use your Nitro Battery Charger, be sure to read and save these safety instructions. INTRODUCTION The Sinergex Nitro
Ampere Hour 77 F (25 C) Weight Weight Model #Cells/Voltage
41-9028 TEL SERIES Valve Regulated Lead Acid (VRLA) Battery Series Designed for Telecom Power Applications FEATURES & BENEFITS Telecordia certified life exceeding 10 years. Telecordia tested and qualified
ELECTRICAL. CDTA Technical Training Center
ELECTRICAL ATOMIC STRUCTURE Protons positive charge Electron negative charge Neutron - neutral Electricity is the movement of electrons from atom to atom ELECTRON FLOW CONDUCTOR - Materials which have
Gary Mackey National Sales Manager Associated Equipment Corporation
Gary Mackey National Sales Manager Associated Equipment Corporation gary.mackey@associatedequip.com Gale Kimbrough Engineering & Tech Services Manager Interstate Batteries Gale.Kimbrough@IBSA.com Paul
PS-Series General Purpose Batteries
PS-Series General Purpose Batteries All PS Series batteries feature: Absorbent Glass Mat (AGM) technology for superior performance. Valve regulated, spill proof construction allows safe operation in any
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 91790
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 91790 RG-CIS25 24 VOLT 26 Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY DECLARATION OF DESIGN PERFORMANCE TO THE REQUIREMENTS
15Amp Intelligent Battery Charger Suitable for SLA, Gel, Maintenance Free, AGM, Deep Cycle batteries
15Amp Intelligent Battery Charger Suitable for SLA, Gel, Maintenance Free, AGM, Deep Cycle batteries MB-3622 READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE! 1 CAUTION! When working
Product Guide. An Invensys company
Product Guide An Invensys company Contents Page I/ The principle of the gas-recombination battery... 2 II/ Charge characteristics... 4 III/ Electrical performance tables... 5 IV/ Battery calculations Float
Chapter 6. Batteries. Types and Characteristics Functions and Features Specifications and Ratings Jim Dunlop Solar
Chapter 6 Batteries Types and Characteristics Functions and Features Specifications and Ratings 2012 Jim Dunlop Solar Overview Describing why batteries are used in PV systems. Identifying the basic components
TELEDYNE BATTERY PRODUCTS
TELEDYNE BATTERY PRODUCTS MAINTENANCE MANUAL For 7638-38HT PROPOSITION 65 WARNING BATTERY POSTS, TERMINALS AND RELATED ACCESSORIES CONTAIN LEAD AND LEAD COMPOUNDS, CHEMICALS KNOWN TO THE STATE OF CALIFORNIA
LAWN & GARDEN PRODUCT ELECTRICAL SYSTEM INFORMATION FOR S 1612
LAWN & GARDEN PRODUCT ELECTRICAL ELECTRICAL SYSTEM INFORMATION FOR LAWN & GARDEN PRODUCT 106 ELECTRICAL LAWN & GARDEN PRODUCT 20 & 22 BATTERY INFORMATION GENERAL INFORMATION (COURTESY OF HAWKER ENERGY
Charge Voltage(V/cell) Set point (V) (V)
Temperature compensation is not necessary when the battery is charged at an ambient temperature of 5 (41 F) to 35 (95 F). At a temperature below 5 (41 F) or above 35 (95 F), however, temperature compensation
The Traveler Series: Wanderer
The Traveler Series: Wanderer RENOGY 30A Charge Controller Manual 2775 E. Philadelphia St., Ontario, CA 91761 1-800-330-8678 Version: 2.0 Important Safety Instructions Please save these instructions. This
CELLS AND BATTERIES Understand the general features of cells and batteries Describe the relationship between cells and batteries. Describe the basic
Cell & Batteries CELLS AND BATTERIES Understand the general features of cells and batteries Describe the relationship between cells and batteries. Describe the basic operation of a battery. Compare between
Significant Changes and Amendments of the Edition of the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air ( TI )
Significant Changes and Amendments of the 209-2020 Edition of the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air ( TI ) Civil Aviation Department 9 December 208 Significant
Pallet Pro On-Board Power System and 6 Volt Group 27 Deep Cycle Bloc Batteries GB A Division of Exide Technologies
Pallet Pro On-Board Power System and 6 Volt Group 27 Deep Cycle Bloc Batteries GB4086 2015-02 A Division of Exide Technologies Element Pallet Pro On-Board Power System Application The Pallet Pro is an
EV Traction Dry Cell Battery Technology
EV Traction Dry Cell Battery Technology High performance comes standard Superior performance. Engineered to last. RESPONSIBLE Solution Nongassing and nonspillable Maintenancefree Approved for environmentally