Accessories Battery Chargers

Transcription

1 Accessories Battery Chargers worldwide Support + Service Accessories Battery Chargers 1

2 1. Transport System Transport System For one battery charger (standard version) Type: MPC4 (f.e. DBL1600) Dimensions transport system (HxWxD): 100(202)x51x62 cm Transport system options incl. signal lamp (height 100 cm) incl. signal lamp (height 20 cm) Art.-No Art.-No /01 Art.-No / / /01 Transport System for B-Housing Version Art.-No Art.-No Type 1 for one charger Type 2 for two chargers Option: Incl. cable reel Test- und Prüfsysteme 2 Accessories Battery Chargers

3 2. Mounting Wallmount For one charger (standard version) Type: MPC4 (f.e. DBL1600) Art.-No Wallmount with cable holder Wallmount with cable bracket incl. mounting and fastening materials for DBL series in B-Housing Version Art.-No Wallmount D-MOUNT-BRACKET Two wall mounting brackets for: Type: DBL300, DBL500, DBL700, DBLW1200 Art.-No Accessories Battery Chargers 3

4 Basic Carrier / Rework Station Basic Carrier for DBL MPC4 chargers, B-Housing Version incl. EU socket combination not mounted other socket combination on request Art.-No Art.-No /10 3. Balancer Cable spring balancer with locking device Load 1,5 3 kg including conductor holder for round cables Art.-No Art.-No /1 Test- und Prüfsysteme 4 Accessories Battery Chargers

5 4. Software Deutronic ServiceTool / OCT Software for a quick and easy update of customer specific firmware (inclusive parameter) via RS232 or USB. Link available via . Art.-No. on request D-TOOL ParameterEdit MPC4 For PC based parameterization of the DBL MPC4 battery chargers and configuration of the D-ADAPT-MPC4 Network Adapter Series via RS232/USB or Ethernet/WLAN Accessories Battery Chargers 5

6 For DBL battery chargers with MPC4 controller board and D-ADAPT-MPC4 Network Adapter Series* Single-seat license (Microsoft Windows Operating Systems: Windows XP, Windows Vista or Windows 10) Without data cable Art.-No * D-ADAPT-MPC4 ETHERNET (see page 9) * D-ADAPT-MPC4 WLAN Enterprise (see page 9) Art.-No Art.-No Test- und Prüfsysteme 6 Accessories Battery Chargers

7 5. Signals + Communication External Signal Lamp For clear signaling of the charging status on production lines and workshops Signal Lamp for charging computers Type: MPC4 (f.e. DBL1600) with 2.5 m cable length (without acoustic signaling) Acoustic signaling with signal green Acoustic signaling with signal yellow Acoustic signaling with signal red Art.-No Art.-No /20* Art.-No /21* Art.-No /22 with 0.5 m cable length (without acoustic signaling) Acoustic signaling with signal green Acoustic signaling with signal yellow Acoustic signaling with signal red Art.-No /1 Art.-No /10* Art.-No /11* Art.-No /12 (* minimum order quantity: 5 pieces) Accessories Battery Chargers 7

8 D-ADAPT-SBB2X25 T-Adapter Art.-No The T-Adapter enables the utilisation of the further functions of the 25 pole DBL interface while at the same time the external signal lamp (DBL-SIG-LR) is connected to the DBL. Type: MPC4 (f.e. DBL1600) D-ADAPT-SB25 Data Cable Art.-No Data cable male-female, 25 pole / 1.8 m Test- und Prüfsysteme 8 Accessories Battery Chargers

9 DBL MPC4 Network Adapter for ETHERNET and WLAN Note: The industrial network adapter is plugged directly to the DBL interface and requires no additional power supply. Type: MPC4 (f.e. DBL1600) D-ADAPT-MPC4 WLAN ENTERPRISE D-ADAPT-MPC4 WLAN enables the DBL battery charger series with MPC4 controller board to be connected to a Wireless LAN network (IEEE b/802.11g) for data transmission with max. 11 mbps. The adapter supports among others WEP/WPA/WPA2 and RADIUS server authentication / PSK (pre-shared keys). Art.-No Battery charger not included in delivery D-ADAPT-MPC4 ETHERNET D-ADAPT-MPC4 ETHERNET enables the DBL battery charger series with MPC4 controller board to be connected to a 10/100Mbit Ethernet network (TCP/IP or UDP). Art.-No Battery charger not included in delivery D-ADAPT-MPC4 Service Adapter The D-ADAPT-MPC4 Service Adapter is connected via the 6-pole service interface to a D-ADAPT-MPC4 ETH / WLAN Enterprise network adapter and enables so the connection of a PC via RS232 interface (9-pole D-SUB socket) to configure the network adapter. Art.-No Battery charger and RS232 cable not included in delivery The Service-Adapter is compatible with the following DBL MPC4 network adapter: D-ADAPT-MPC4 WLAN Enterprise (Art.-No ) D-ADAPT-MPC4 ETHERNET (Art.-No ) Accessories Battery Chargers 9

10 D-ADAPT Starter Kit The adapter starter-kit contains the D-ADAPT-MPC4 Service Adapter (Art.-No ) as well as the PC-Tool Tool D-TOOL ParameterEdit MPC4 (Art.-No ) and electively: D-ADAPT-MPC4 WLAN ENTERPRISE For wireless connection of charging computers of the DBL series with MPC4 controller board D-ADAPT-MPC4 ETHERNET To connect charging computers of the DBL Series with MPC4 controller board to an Ethernet network Art.-No /1 Art.-No /1 Test- und Prüfsysteme 10 Accessories Battery Chargers

11 6. Connection Technology Mains Cables Mains cable Europe Schuko according to IEC C13 Mains cable for USA according to NEMA 5-15 Mains cable for Australia according to AS m 3.0 m 5.0 m 3.0 m 5.0 m 2.5 m 5.0 m Art.-No Art.-No Art.-No Art.-No Art.-No Art.-No Art.-No Mains cable for UK according to BS m 5.0 m Art.-No Art.-No Mains cables international (4 SET) Set consists of 4 mains cables Europe-Schuko USA / Canada / Japan UK / Ireland / Hong Kong Australia / New Zealand Mains cables international (3 SET) Set consists of 3 mains cables USA / Canada / Japan UK / Ireland / Hong Kong Australia / New Zealand 5.0 m 5.0 m Art.-No Art.-No Accessories Battery Chargers 11

12 Charging Cables 16 mm² / 100 m reel Cable for battery charger 16 mm² Art.-No Standard Cable / Length Connection Cable Clamps Art.-No. 16 mm² / 3.0 m Standard 200A mm² / 5.0 m Standard 200A mm² / 5.0 m Standard 200A Special Variants Cable / Length Connection Cable Clamps Art.-No. 10 mm² / 2.0 m Standard 80A mm² / 7.0 m Standard 200A mm² / 10.0 m Standard 200A mm² / 12.0 m Standard 200A mm² / 15.0 m Standard 200A /9 16 mm² / 3.0 m angled 200A mm² / 5.0 m angled 200A mm² / 5.0 m Pressed cable lug M mm² / 3.0 m Cable lug M10 Standard 200A Test- und Prüfsysteme 12 Accessories Battery Chargers

13 Cable clamps 200A, completely isolated For professional applications Standard red black Art.-No Art.-No Set angled red and black Art.-No Charging cable coupling Charging cable coupling (plug) Charging cable coupling (socket) Art.-No Art.-No Welding connector Socket / plug for mounting in your own application Mounting plug (minus) Art.-No Mounting socket (plus) Art.-No Welding plug / Charging cable coupling set Set includes Art.-No , , and Art.-No Accessories Battery Chargers 13

14 Mains connection kit For DBL3000/3W and DBL5500/3W Art.-No HARTING-plug HARTING-plug for all DBLxxx/3W HAN-versions (mains connection) Art.-No Miscellaneous Spare Parts Rubber foot for DBL800 Hinged feets frontside for Type: MPC4 (f.e. DBL1600) Carrying handle for product groups: Type: MPC4 (f.e. DBL1600) and DBL300, DBL500, DBL700, DBLW1200 (Attention handle is not generally mountable! The basic article needs to be prepared ex factory.) Art.-No Art.-No Art.-No Further spare parts on request Test- und Prüfsysteme 14 Accessories Battery Chargers

15 Power and More Battery Chargers Power Supplies Test Systems DC/DC Converter Motor Controller worldwide Support + Service

16 Technical modifications and mistakes reserved. Products are described by information contained in catalogs and data-sheets. It is not be considered as assured qualities. IMPORTANT SAFETY NOTE: In all installations, the applicable safety guidelines are observed. In particular, cable (mains cable and charging cable!) exclusively used in the completely unwound state, to ensure adequate cooling. In any case of ware, the affected lines will be renewed. Deutronicstraße 5 D Adlkofen/Germany Tel.: +49 (0) Fax: +49 (0) sales@deutronic.com