MD GHz RTF/Tx-R Instruction Manual. Entire Contents 2012 Hobbico, Inc. HMXE0813 RTF HMXE0814 Tx-R

Size: px

Start display at page:

Download "MD GHz RTF/Tx-R Instruction Manual. Entire Contents 2012 Hobbico, Inc. HMXE0813 RTF HMXE0814 Tx-R"

Suzanna Nicholson
6 years ago
Views:

1 MD50 2.4GHz RTF/Tx-R Instruction Manual Entire Contents 2012 Hobbico, Inc. HMXE081 RTF HMXE0814 Tx-R

2 TABLE OF CONTENTS INTRODUCTION SAFETY PRECAUTIONS WARRANTY ADDITIONAL ITEMS REQUIRED KIT INSPECTION KIT CONTENTS Tx-R BATTERY PRECAUTIONS CHARGING THE FLIGHT BATTERY INSTALL THE TRANSMITTER BATTERIES TRANSMITTER CONTROLS TURNING THE MODEL ON FLYING ORDERING REPLACEMENT PARTS PARTS LIST EXPLODED VIEW INTRODUCTION Thank you for purchasing the Heli-Max MD-50 Helicopter. We are certain you will get many hours of enjoyment out of this model. If you should have any questions or concerns please feel free to contact us at helihotline@hobbico. com. For the latest technical updates or manual corrections, visit the Heli-Max web site at: Open the Helicopters link, and then select the MD-50. If there is new technical information or changes to this model a tech notice box will appear in the upper left corner of the page. SAFETY PRECAUTIONS Follow these safety precautions when operating this or any model helicopter. Keep your face and body as well as all spectators away from the plane of rotation of the rotors whenever the battery is connected. Keep these items away from the rotors: loose clothing, shirt sleeves, ties, scarfs, long hair or loose objects such as pencils or screwdrivers that may fall out of shirt or jacket pockets into the rotors. 2

3 The spinning blades of a model helicopter can cause serious injury. When choosing a fl ying site for your MD-50, stay clear of buildings, trees and power lines. AVOID fl ying in or near crowded areas. DO NOT fl y close to people, children or pets. Maintain a safe pilot-to-helicopter distance while fl ying. Your MD-50 should not be considered a toy, but rather a sophisticated, working model that functions very much like a full-size helicopter. Because of its performance capabilities, the MD-50, if not operated correctly, could possibly cause injury to yourself or spectators and damage to property. Do not alter or modify the model, as doing so may result in an unsafe or unfl yable model. You must check the operation of the model before every fl ight to insure that all equipment is operating and that the model has remained structurally sound. Be sure to check linkages or other connectors often and replace them if they show any signs of wear or fatigue. WARRANTY Heli-Max guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modifi cation. In no case shall Heli-Max s liability exceed the original cost of the purchased kit. Further, Heli-Max reserves the right to change or modify this warranty without notice. In that Heli-Max has no control over the fi nal assembly or material used for fi nal assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the fi nal user-assembled product. By the act of using the user-assembled product, the user accepts all resulting liability. If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this kit immediately in new and unused condition to the place of purchase. To make a warranty claim, send the defective part or item to Hobby Services at this address. Hobby Services 002 N. Apollo Dr., Suite 1 Champaign, IL USA Include a letter stating your name, return shipping address, as much contact information as possible (daytime telephone number, fax number, address), a detailed description of the problem and a photocopy of the purchase receipt. Upon receipt of the package the problem will be evaluated as quickly as possible.

READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.

4 READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL. ADDITIONAL ITEMS REQUIRED For Tx-R: Tactic AnyLink and your transmitter KIT INSPECTION Before starting assembly, take an inventory of the MD-50 kit. If any parts are missing, damaged, or defective, contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in the Kit Contents list. Heli-Max Product Support Ph: (217) , ext N. Apollo Drive, Suite 1 Fax: (217) Champaign, IL helihotline@hobbico.com KIT CONTENTS Helicopter 2. USB Charger. Flight Battery 4. Transmitter (RTF only) 4 5. AA Batteries (4) 6. Screwdriver

5 Your new MD-50 uses SLT protocol. This means that with the simple addition of the Tactic Anylink, you can enjoy your new machine with nearly any transmitter. AnyLink Tx Compatibility Chart (Check Tx-ready.com for updates) 4YF (72MHz), 4YBF, 6EX, 6J, 7C, 8FG, 9C, 10C, 12FG Futaba 4VF, 5U, 6A, 6DA, 6H, 6YF, 6YG, 7NFK, 8U, 9Z 4YF (2.4 GHz), 12Z, 14MZ, 18MZ Neon, Flash (4sx, 5, 5sx), Focus (4, 6), Laser (4, 6), Optic 5 (72MHz), Optic 6 (72MHz, 2.4GHz), Eclipse 7 (72MHz), Prism (7, 7X) Hitec Aurora 9 Optic 5 (2.4GHz), Optic 6 Sport, Eclipse 7 (2.4GHz) JR All aircraft transmitters with trainer jack DX6, DX6i, DX7 Spektrum DX4e, DX5e, DX7s, DX8, DX10t, DX18 Tower 4TH, 6XM Hobbies 4FM, 6FM Graupner MX-16 *Includes a rechargeable 6.6V LiFe battery. LiFe-compatible charger required. Required Cable INCLUDED TACM000 TACM0007* TACM000 TACM0004 TACM0005* INCLUDED INCLUDED TACM0005* INCLUDED TACM000 INCLUDED WARNING: AnyLink must be in Normal Mapping (1 Beep) when Futaba or Hitec transmitters are used with Tx-R aircraft. If using Spektrum, JR, or Graupner transmitters, AnyLink must be in Alternate Mapping (2 Beeps). (See AnyLink manual.) This helicopter is unique in that it can work with either an airplane or helicopter radio. Use the following guide as a setup. Once you feel comfortable, fi ne tune to your liking. Setup Note: Only adjust the listed parameters and keep all other airplane or helicopter functions inhibited. If you fl y in heli mode, make sure your swash is setup for a 90 deg system (H-1). Futaba channel 1 channel 2 channel channel 4 Reverse N N R N Endpoint 140* each way 140* each way D/R 100/80 100/ Expo pos 20 pos 20 0 Spektrum Reverse N N R N Endpoint 140* each way 140* each way D/R 100/80 100/ Expo neg 20 neg 20 0 *or as high as you can go Spektrum is a registered trademark of Horizon Hobby, Inc. 5

6 BATTERY PRECAUTIONS This MD-50 uses a lithium polymer (LiPo) battery. Follow these precautions to insure safe and trouble free operation. Only use the included charger with the included battery. Do not attempt to use this charger with NiCd or NiMH battery packs. If the battery should become damaged, discard it. Do not attempt to use a damaged battery. Do not leave the charger unattended while charging. Disconnect the battery and unplug the charger immediately if either becomes hot! However, it is normal for the charger to get warm. Disconnect the battery from the charger and carefully move the battery to a fi reproof location if the battery begins to swell or smoke! Never trickle charge. Never allow the battery temperature to exceed 140 F [60 C]. Never disassemble or modify pack wiring in any way or puncture cells. Do not allow water, moisture or foreign objects into the charger. Do not place the charger or any battery on a fl ammable surface or near a combustible material while in use. Do not charge on a carpet, cluttered workbench, paper, plastic, vinyl, leather, wood, or inside an R/C model. Never charge inside a vehicle. Always disconnect the battery and remove the charger from the USB port when not in use. Do not attempt to charge a battery if it is swollen or hot. Land your model immediately when the battery begins to lose power. Recharge the battery before attempting another flight. A dangerous situation can occur when attempting to recharge an over-discharged battery! ALWAYS keep a supply of sand accessible when charging. Dumping sand on the battery will extinguish the LiPo chemical fi re. ALWAYS KEEP OUT OF REACH OF CHILDREN. 6

Allow the battery and charger to rest for two hours as this will allow the charge protection circuit to reset.

7 CHARGING THE FLIGHT BATTERY WARNING!! The charger supplied with the Heli-Max MD-50 Helicopter contains protective circuitry. If you experience any diffi culties while charging the battery, please disconnect the battery from the charger and unplug the charger from the power source. Allow the battery and charger to rest for two hours as this will allow the charge protection circuit to reset. If this issue re-occurs during normal use, please contact technical support for further assistance. Plug the USB charger into your USB port. The power indicator light on the charger will illuminate red indicating that the charger is ready for use. Plug the battery into the charger. The indicator light will start fl ashing, indicating that the battery is being charged. Once the battery is completely charged, the charge indicator light will stop fl ashing. Disconnect the battery from the charger. Under normal operating conditions, the battery may take up to 60 minutes to recharge. Charger Indications Ready to charge battery. Charging Battery is fully charged. Charger is not powered. Charger error* Power Indicator Solid Flashing Solid Off Flashing * Once the battery has been disconnected from the charger contact technical support for further assistance. 7

TRANSMITTER CONTROLS All controls are described with the tail pointing directly toward you.

8 INSTALL THE TRANSMITTER BATTERIES Carefully remove the battery door and install four AA batteries. Double check the polarity of each battery. Slide the battery cover back into place. TRANSMITTER CONTROLS All controls are described with the tail pointing directly toward you. This is the best way to fl y in the beginning since it keeps the control inputs oriented the same direction. Once you start getting comfortable you can work on side hovering and nose-in. 8

The dual rate switch provides dual control rates for the cyclic and tail rotor

Change the dual rate using a quick push of the right stick.

stick to the desired percentage. Release the right stick to set.

the helicopter to tilt and start moving that direction.

9 The dual rate switch provides dual control rates for the cyclic and tail rotor controls. Please use the low rate until you become accustomed to your MD- 50. Change the dual rate using a quick push of the right stick. To adjust the dual rate, push and hold the right stick and move the throttle stick to the desired percentage. Release the right stick to set. Helicopter Moves Right or Left Moving the cyclic stick right or left will cause the helicopter to tilt and start moving that direction. Helicopter Moves Backwards or Forwards Moving the cyclic stick forward or backward will cause the helicopter to tilt and start moving that direction. 9

Helicopter Climbs or Descends Moving the throttle stick

Nose Rotates Left or Right Moving the tail rotor stick

10 Helicopter Climbs or Descends Moving the throttle stick up or down will cause the helicopter to climb or descend. Nose Rotates Left or Right Moving the tail rotor stick left or right will cause the helicopter nose to rotate in that direction. TURNING THE MODEL ON Move the throttle stick to the lowest position and then turn the transmitter on. 10

Electric motors are very dangerous. Do not work on the model while the flight battery is plugged in as interference may cause the main rotor blades to spin, possibly causing injury to yourself.

11 Electric motors are very dangerous. Do not work on the model while the flight battery is plugged in as interference may cause the main rotor blades to spin, possibly causing injury to yourself. Slide the flight battery into the battery compartment. NOTE: The battery will only install one way. The helicopter will be ON at this point. Your helicopter has a safe start feature built in that prevents the motor from activating unless the throttle stick has been lowered to the lowest position. If the motor won t run and turn the main blades, please make sure the throttle stick is all the way down and leave it there for a couple of seconds. Then try moving the stick up slowly. FLYING The Heli-Max MD-50 is a lightweight helicopter. Taking that into consideration, you should only fl y indoors or in calm winds less than 5mph. It should be fl own in a large area of at least 75 feet [15.25m] square with no obstacles. Crashing If you have operated radio control models in the past, then you probably already realize that it is not a matter of if you are going to crash, it is a matter of when you are going to crash. Once you realize the model is going to collide with something or crash into the ground, you should always bring the throttle stick all the way down to stop the main rotor blades from rotating. If you can remember to do this, chances are you will not damage the helicopter in the crash. The main rotor blades carry a lot of RPM and inertia during fl ight. Cutting the power to the main rotor blades will prevent most of the crash damage. Takeoff Slowly add power, observe the model and make all of the necessary corrections to keep the model level. You will fi nd that model helicopters never allow you to return the sticks to center. You just need to position the stick as needed to maintain a steady hover. With the TAGS system, no trimming is needed. 11

12 Hovering Once the helicopter is up in the air, try to hold the helicopter in one spot. If this is your fi rst model helicopter, it will require some practice. Wind or air currents have a big effect on the stability of the helicopter. Be patient and try to anticipate where the helicopter will move. Landing Level the helicopter into a steady hover and slowly decrease power until the helicopter settles onto the ground. Basic Maneuvers Slow Pirouettes Add a small amount of tail rotor (left or right) and try rotating the helicopter slightly sideways and see if you can hold it there. If you feel uncomfortable, then bring the tail back toward you. Once you start getting comfortable, try moving the helicopter to the side. Then turn back and fl y back to the other side in straight lines. Then work into rotating the helicopter around 60, which is called a pirouette. The helicopter can drift during these so make sure you have plenty of room when you fi rst start practicing. Nose-in Hovering After pirouettes it s time to move on to nose-in hovering. Take off and climb to 10 feet [m]. Practice half pirouettes from tail in to nosein hovering and try to lengthen the delay in between. This will give you a little practice nose-in and still give you a chance to get out of trouble. As your skills improve you ll remain nose-in for longer periods of time. Forward Flight Now it s time to work into basic forward fl ight. Just take the basic hovering maneuvers listed above and slowly fl y out farther and faster and always bring the helicopter back after one pass. Practice controlled slow fl ight in close as well. The more time you spend practicing here the easier things will be later on. GOOD LUCK AND GREAT FLYING! ORDERING PARTS Replacement parts for the Heli-Max MD-50 are available using the order numbers in the Replacement Parts List that follows. The fastest, most economical service can be provided by your hobby dealer. To locate a hobby dealer, visit the Heli-Max web site at Choose Where to Buy at the bottom of the page. Parts may also be ordered directly from Hobby Services by calling (217) , or via facsimile at (217) , but full retail prices and shipping and handling charges will apply. Illinois and Nevada residents will also be charged 12

13 sales tax. If ordering via fax, include a Visa or MasterCard number and expiration date for payment. Mail parts orders Hobby Services and payments by 002 N. Apollo Drive, Suite 1 personal check to: Champaign, IL Be certain to specify the order number exactly as listed in the Replacement Parts List. Payment by credit card or personal check only; no C.O.D. If additional assistance is required for any reason contact Product Support by at helihotline@hobbico.com, or by telephone at (217) PARTS LIST Key No. Part No. Part Name 1 HMXE2105 Main Blade 2 HMXE215 Blade Grips HMXE2160 Screw Set (All) 4 HMXE217 Feathering Shaft 5 HMXE218 Blade Grip Spacers 6 HMXE219 Rubber Dampeners 7 HMXE2140 Rotor Head 8 HMXE2141 Rotor Head Linkage 9 HMXE2142 Main Shaft 10 HMXE214 Swashplate 11 HMXE2109 Main shaft collar 12 HMXE2144 Bearing Set 1 HMXE216 Main Frame 14 HMXG8028 Main Motor 15 HMXM209 TAGs -1 SLT Control Board 16 HMXE2162 Servo Linkages 17 HMXE2147 Main Gear 18 HMXE2165 LED Light 19 HMXE2164 Canopy (front with LED) 20 HMXE2150 Servo Arms with metal ball joint 19/21 HMXE2168 Fuselage 21 HMXE2161 Aft Fuselage 22 HMXM207 Servo 2 HMXG800 Tail Motor with boom assembly 24 HMXE2152 Tail Rotor Blade 25 HMXP1007 1S LiPo Battery 26 HMXE2167 Landing Skid 27 HMXE2166 Battery Frame HMXJ SLT Transmitter HMXP2021 1S USB Charger 1

14 EXPLODED VIEW 2 21 MD50 Fuselage

15 MD50 Rotor Head MD50 Frame 26 15

16 FCC REQUIREMENT This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT. CE COMPLIANCE INFORMATION FOR THE EUROPEAN UNION Instructions for Disposal of Waste Equipment by Private Users in the European Union: This symbol on the product or its packaging indicates this product must not be disposed of with other household waste. Instead, it is the user s responsibility to dispose of their waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or location where you purchased the product. Declaration of Conformity: Product: Heli-Max TX GHz 4-Channel Tx Rx Item number: HMXJ2024 TX410, Equipment class: 1 TX410 transmitter: The objects of the declaration described here are in conformity with the requirements of the specifications listed below, following the provisions of the European 2006/95/EC Low Voltage Directive: EN :2006 Safety The objects of the declaration described here are in conformity with the requirements of the specifications listed below, following the provisions of the European R&TTE directive 1995/5/EC: ETSI EN V1.7.1 Technical requirements for radio equipment ETSI EN V1.8.1, V1..2 General EMC requirements for radio equipment Hobbico, Inc Research Road Champaign, IL USA The associated regulatory agencies of the following countries recognize the noted certifications to this product as authorized for sale and use. UK DE DK BG SE FI GR EE LV LT PL CZ SK HU RO SI AT IT ES PT IE NL LU MT CY 16

INSTRUCTION MANUAL. Specifi cations. Length: 9.0 in [229mm] Width: 2.7 in [68mm] Height: 3.3 in [84mm] Rotor Span: 7.9 in [200mm]

INSTRUCTION MANUAL. Specifi cations. Length: 9.0 in [229mm] Width: 2.7 in [68mm] Height: 3.3 in [84mm] Rotor Span: 7.9 in [200mm] INSTRUCTION MANUAL Specifi cations Length: 9.0 in [229mm] Width: 2.7 in [68mm] Height: 3.3 in [84mm] Rotor Span: 7.9 in [200mm] Flying Weight: 2 oz [57.2g] with supplied fl ight battery IMPORTANT PRECAUTIONS