(The information contained in this document is for reference only and should not be used as a basis for product guarantee or warranty.
|
|
- Egbert Wheeler
- 6 years ago
- Views:
Transcription
1 Technical Specification for Professional Camcorder of Ni-MH Rechargeable Battery Pack Product Description Product No. Model No. : 12.0V Ni-MH, 4000mAh Camcorder Battery Pack : VMH9011 : Replace Sony NP-1B, NP-25 (The information contained in this document is for reference only and should not be used as a basis for product guarantee or warranty.) 1. SCOPE This technical specification is applied to a sealed Ni-MH cylindrical rechargeable battery as a power supply for camcorder. The battery pack is bonded by 10 pieces of 4000mAh single cell according to 1P10S. The battery converts chemical energy into electrical energy by chemical reaction. The total voltage of battery pack is an individual single cell voltage times ten. 2. CELL TYPE Cell : Sealed Ni-MH Cylindrical Rechargeable Battery Model : SANYO HR-4/3AU Size : 4/3A VMH
2 3. PACK RATING Nominal Voltage : 12.0V Nominal Capacity : 4000mAh Minimum Capacity : 3600mAh Standard charge rate : 400mA 16hours Quick charge rate : 2000mA 130minutes End voltage of Discharge : 12V Internal Resistance (for reference only) : 200m Operating temperature range : (Humidity: 65+20%) Charge Temperature : 0 to 40 Discharge Temperature : 0 to 50 Storage Temperature range : (Humidity: 65+20%) Less than 30days : -20 to days : -20 to 40 90days 1year : -20 to PHYSICAL CHARACTERISTICS Weight of battery (for reference only) Nominal size per pack (for reference only) : Approx. 606g : L183.7 W71.0 H24.5mm 4.1 MATERIAL OF CASING A non-inflammable material from GE injects the plastic casing model CYCOLOY C2950HF. It is listed UL94 V-0VA and 5VE. 5. ELECTRICAL TEST Unless otherwise stated in this specification, all testing procedure should be carried out at 20+2 temperature and a relative humidity of 65+ 5%RH. 5.1 Charging Characteristics Full charge is defined as charged up to controlled fast charge by a specified fast charger. specified fast charger is as follows: Charging current: 2000mA Full charge detection: Peak Voltage 5.2 Terminal Voltage (O.C.V) Open circuit voltage of the battery shall be a minimum voltage of 12.5V within 14 days after fully charged. 5.3 Capacity Characteristics The battery shall be discharged at the constant current of 700mA to 10.0V end voltage within 1 hour after fully charged. The battery capacity shall be more than 95%. VMH
3 The battery shall be discharged at the constant current of 2000mA to 10.0V end voltage within 1 hour after fully charged. The battery capacity shall be more than 79%. The battery is discharged at a constant current of 700mA to 10.0V. Then the battery is charged at a constant current of 400mA for 16 hours. Within 1 hour, the battery shall be discharged at the constant current of 700mA to 10.0V end voltage, the battery capacity shall be more than 50%. 5.4 Self Discharge The battery is charged at constant current of 2000mA for 95minutes, the battery is stored for 28 days at 20, then the battery is discharged at constant current of 2000mA to 10.0V and the battery capacity shall not be less than 55%. The battery is charged at constant current of 2000mA for 95minutes, the battery is stored for 7 days at 40, then the battery is discharged at constant current of 2000mA to 10.0V and the battery capacity shall not be less than 55%. 5.5 Over Discharge Capacity of fully charged battery unit, when discharged with 20 load for 8 hours. shall not cause damage, leakage, salting or degradation in performance characteristics as specified herein. 5.6 Temperature Characteristics The battery is charged at constant current of 2000mA for 95minutes at 40 within 1 hour, the battery is discharged at constant current of 2000mA to 10.0V at 20 and the battery capacity not be less than 67.5%. The battery is charged at constant current of 2000mA for 95minutes at 20 within 1 hour, the battery is discharged at constant current of 2000mA to 10.0V at 0 and the battery capacity not be less than 47.5%. 5.7Safety The battery shall not rupture when charged at 2000mA for 5 hours. However it is acceptable for the battery to sustain leakage of battery fluid and show a change in appearance. The battery shall not rupture when reverse charged at 2000mA for 5 hours, However it is acceptable for the battery to sustain leakage of battery fluid and show a change in appearance. VMH
4 6. Mechanical Test 6.1 Vibration Test The battery is vibrated in triaxial direction with 4 mm amplitude of frequency 30 Hz (1 Hz per minute) for 1 minute in triaxial direction. The battery is observed to be normal. 6.2 Dropping Test The battery is dropped from a vertical height of 0.5m onto a flat, firm, non-yielding surface. The same battery is dropped in the same manner seven times. The battery is then observed and appears to be normal. 7. SUPPLY The battery should be shipped at charged state. 8. Safety Devices and Abuse Requirement Circuitry protection as described below has been presented inside the battery pack, to insure safety in case of misuse. Over Temperature Protection When battery internal temperature exceeds 75 the thermal interrupter shall trip creating an open circuit that prevents further charging or discharging of the battery. The thermal interrupter will automatically reset when the internal temperature drops below SAFETY PRECAUTIONS AND HANDLING If inappropriate handling of the battery, it may cause the equipment malfunction from affecting the battery. Be sure that the battery pack is handled properly. The battery shall be charged before the first time application by a specified charger. Always keep the battery in a cool and dry place. Be sure to use a charger specified by manufacturer. The battery pack includes flammable organic solvents. If inappropriate handling occurs it is possible that the battery may rupture, leakage, ignite, or overheat, causing irreparable damage. Do not disassemble or modify the battery pack. The battery pack is equipped with built in safety protection features. VMH
5 Do not externally short circuit the battery packs. Specification Ver. A Do not use or leave battery nearby fire, stove or heated place (more than 80 ). It could melt the resin separator causing it to overheat. If submerged in water, the safety circuitry may be damaged to the point where the safety devices will not operate properly. Possible overheating, ignition and bursting may occur. Do not directly solder on the battery pack. Heat can melt down its insulation and damage safety circuit. Do not use extreme pressure or another medium for potential deformation of the battery pack. An external opposite connection of the battery pack terminals will short-circuit the battery, resulting in the pack overheating, ignition and damage. Do not use the battery pack for using other than those specified by manufacturer. Otherwise, the battery performance may be diminished, its service life may be shortened and it will void the performance guarantee. Do not charge, overcharge, or inverse charge at a higher current than specified. Charging the battery pack using chargers not specified or modified may cause the battery pack to overheat, ignite or explode. If any abnormality or problem of the battery exists, discontinue to use. 10. RECOMMENDED DISPOSAL METHOD The battery contains hazardous waste materials therefore should be disposal by recognized recycle organization. Contact your local agencies to ensure appropriate disposal performed by permitted contractor. Operated by Date July 16, 2002 Checked by Date Approved by Date VMH
6 The top drawing of the battery Specification Ver. A VMH
RS Stock No
RS Stock No. 770-0371 EN RS Article : 7770371 AA x 10 Nominal Voltage 12.0V Capacity Typical 1300 mah/0.2 CmA Minimum 1200 mah/0.2 CmA Charge Standard 0.1 CmA for 16 hrs. Rapid 1C for 1.2hrs.(approx.)
More informationCHARACTERISTICS FOR. NEXcell NICKEL-METAL HYDRIDE RECHARGEABLE BATTERY PACKS. MODEL HTD x 10
Total Page : 8 CHARACTERISTICS FOR NEXcell NICKEL-METAL HYDRIDE RECHARGEABLE BATTERY PACKS MODEL HTD x 10 This specification is available only for the testing within one month since receipt of batteries.
More informationHigh Temperature Rechargeable Nickel-Metal Hydride Cylindrical Battery Pack, 3 cell, 4000mAh
Datasheet ENGLISH High Temperature Rechargeable Nickel-Metal Hydride Cylindrical Battery Pack, 3 cell, 4000mAh SPECIFICATIONS: RS Article: 917-5920 HT18670x3 Nominal Voltage 3.6V Typical 4000 mah/0.2 CmA
More informationENGLISH. RS Stock No
RS Stock No 777-0399 RS Article : 7770399 AA x 20 Nominal Voltage 24V Capacity Typical 1300 mah/0.2 CmA Minimum 1200 mah/0.2 CmA Charge Standard 0.1 CmA for 16 hrs. Rapid 1CmA for 1.2hrs.(approx.) (With-
More informationProduct Specification
Product Specification for Polymer Lithium-ion Battery Model Number: PGEB014461 1. Scope This document describes the performance characteristics and testing methods for Polymer Li-ion Batteries produced
More informationENGLISH. RS Stock number Description:
RS Stock number 199-747 Description: Tagged to allow for combining into larger battery packs for permanent installation Voltage 1.2V Quick 4 to 6hr charging rate. This is a sealed Nickel-Metal Hydride
More informationNI-MH LOW-SELF DISCHARGE READY TO USE
Product Datasheet NI-MH LOW-SELF DISCHARGE READY TO USE RS Article No.: 9053781 1. Scope of Application: Type Nominal Voltage 1.2V/cell Capacity Typical 2000 mah/0.2 CmA@20 Minimum 1900 mah/0.2 CmA@20
More informationTYPE:UP-SC3600mAh (Flat) Specifications. Dimensions. Typical characteristics Standard charge characteristics. Nominal voltage 1.2V.
TYPE:UP-SC3600mAh (Flat) Specifications Nominal voltage 1.2V Capacity Dimensi ons Weight(Approximat 0.2C 30A Minimum 3600mAh 3400mAh Typical 3800mAh 3500mAh mm inch Diameter 22.7 ±0.05 0.89 ±0.002 Height
More informationTenergy Corp 1292 Kifer Road Suite 807 Sunnyvale CA 94086
SPECIFICATION FOR Ni-MH RECHARGEABLE BATTERY Tenergy Corp 1292 Kifer Road Suite 807 Sunnyvale CA 94086 Battery Model No.: TEN-44AAAJ1000 DATE: July 7, 2006 EDITION: A/0 FILE No.: TEN-CQC-BR-0101 These
More informationRS Stock number
RS Stock number 617-0773 Description: For general purpose applications No memory effect Note: All batteries are supplied with only a residual charge and should be charged at the continuous charge rate
More informationContents. Page 1. Publication Record Safety Instructions Extent of the Application Battery Classification and Type 6
Contents Page 1. Publication Record 1 2. Safety Instructions 2-5 3. Extent of the Application 6 4. Battery Classification and Type 6 5. Nominal Specifications 6 6. Electrical Characteristics 7-8 7. Design
More information2 1.Nominal Voltage 1.2V. 2 6.End Voltage of Discharge 1.0V
Product Name: NiMH 1.2V 3800mah 23.0 +0.0-0.7 Product Number: SCP 3800 11.0 À0.1 Battery Size: Battery Chemistry Dimension: Sub-C NiMH 43mm x 23mm 1.BATTERY MODEL SCP3800 10C 2.NOMINAL SPECIFICATION 2
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Lithium-Ion Rechargeable Battery Model: 30001-1 SPEC: 14500, 3.7V, 800mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Lithium-ion Cell Model: 30005-0 SPEC: 3.7V 2600mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com 1
More informationTechnical Specification
1. Scope This specification describes the technological parameters and testing standard for the lithium ion rechargeable cell manufactured and supplied by Green Energy Co. Ltd. 2. Products specified 2.1.
More informationAPPROVE SHEET. Customer : Lithium ion polymer rechargeable battery. Cell s model name : Assembly: Date : 2008/01/29.
APPROVE SHEET For Lithium ion polymer rechargeable battery Customer : Cell s model name : Assembly: Date : 2008/01/29 REVISED : 0 Customer approval Comment : Customer s signature/ Date : Approved Checked
More informationPolymer Lithium Ion Battery. Specifications. Model: PL D. Approval Checked Draft
Document NO. Spec. No. SP362D Ver A/1 Date 200/3/20 Polymer Lithium Ion Battery Specifications Model: PL-362D Approval Checked Draft AA Portable Power Corp. Address: 2700 Rydin Rd, Unit C, Richmond, CA
More informationSpecification. Cylindrical Li-ion battery. Type: Product model battery VER A Product Specification 3. 6 V 2600 mah
Product Specification 3. 6 V 2600 mah Date 2005/1/3 Cylindrical Li-ion battery Specification Type: 18650 1 Te l: 510-525-4710 Fax: 510-525-4728 Toll Free: 1-800-448-4428 Product model 18650 battery VER
More informationSanyo Lithium ion Rechargeable Batteries
Sanyo Lithium ion Rechargeable Batteries URL http://www.sanyo.co.jp/energy/ SEB-16 Lithium-ion Battery Handling Precautions Danger 1 Do not disassemble or modify the battery pack. The battery pack is equipped
More informationLi-ion Battery Specification
Li-ion Battery Specification Model Number: LP 103450 3.7V 1800mAh Prepared By Verified By Approved By 8-1 Amendment Records Revision Description Issued Date Approved By A0 New release 2012-02-15 8-2 Contents
More informationL CR MAH
TECHNICAL SPECIFICATION FOR LI-ION L CR18650-2 0 0 0 MAH FILE NO. : DSE - LCR - L CR18650-2000 - V 17 A EDITION : V1 7 A DATE : 20 1 7 / 03 / 08 CYLINDRICAL RECHARGEABLE BATTERY Prepared By Checked By
More informationSpecifications. Model: LiNiCoMn 3.7V 2000mAh. Prepared Checked Approved. AA Portable Power Corp Address:
Specifications Model: LiNiCoMn 3.7V 2000mAh Prepared Checked Approved Address: Tel:( 510) http://www.batteryspace.com Revision History VER. Release Date Amendments 1.0 2011/3/8 First release Spec. No.
More informationEEMB CO., LTD. Lithium Manganese Dioxide Battery Specification. High Power Type. Prepared Checked Approved. Signature Checked Approved
EEMB CO., LTD Lithium Manganese Dioxide Battery Specification High Power Type Model: Capacity: CR26500SL 5000mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature
More informationLITHIUM-ION POLYMER RECHARGEABLE BATTERY
Model : Description : Lithium-Ion Polymer rechargeable battery (RoHS compliant) Dimension : Max. 14.1 x 34.5 x 51mm Nominal Capacity : 1100mAh (Min. 1045) at 220mA rate discharge to 6V at 25 C Nominal
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Li-Ion 18650 3.6V 2200mAh battery Model: 30023-0 SPECS: 3.6V 2200mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergy.com
More informationCheckup. Make. Signature. Date. Company Stamp: com
Specification Approval Sheet Name: NICD A size Rechargeable Battery Model: SPEC: 20200 1.2V 1400mAh Approved By Checkup Make Customer Confirmation Signature Company Name: Stamp: Date 436 Kato Terrace,
More informationLi-ion Cylindrical Battery Specification
Li-ion Cylindrical Battery Specification MODEL: EC- 265HC Nominal Capacity: 5200 mah page 1 of 10 Content 2.Scope... 3 3. Initial Dimension... 3 4.Specification... 4 5 General Performance... 5 6 Environment
More informationLi-ion Cylindrical Battery Specification
Li-ion Cylindrical Battery Specification MODEL: EC- TN26650HP Nominal Capacity: 3400 mah page 1 of 7 Content 1.MODIFIED LIST... 2 2.Scope... 3 3. Initial Dimension... 3 4.Specification... 4 5 General Performance...
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Cylindrical Lithium Ion Cell Model: 30001-0 SPEC: 14500-800 Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel: 510.687.0388
More informationLi-ion Cylindrical Battery Specification
Li-ion Cylindrical Battery Specification MODEL: Nominal Capacity: Customer: Enercig Total Page 7 EC-14500HP 650mAh Content 1.Product Image... 2 2.Scope... 2 3. Initial Dimension... 3 4.Specification...
More informationLi-ion Cylindrical Battery Specification. SHIBA Li-ion Battery Typical Capacity: 2000mAh Total Page: 10
Li-ion Cylindrical Battery Specification MODEL : SHIBA Li-ion Battery Typical Capacity: 2000mAh Total Page: 10 1 P a g e Table of Content 1. Scope...3 2. Initial Dimension...3 3. Specification...4 4. General
More informationLi-ion Cylindrical Battery Specification. Enercig EC-32600
Li-ion Cylindrical Battery Specification Enercig EC-32600 Li-ion32600C Nominal Capacity 5500mAh Registered Checked Approved 2015.02.06 2015.02. 06 1. MODIFIED LIST 2.Scope This specification describes
More informationTitle Specifications of Lithium Ion battery (Cylindrical Type) page 1/12
Title Specifications of Lithium Ion battery (Cylindrical Type) page 1/12 1. Extent of the application This specification is applied to the SANYO Lithium Ion Battery of the above mentioned type for a Notebook
More informationLi-ion Button Rechargeable Battery Specification
7 Customer: Li-ion Button Rechargeable Battery Specification MODEL: LIR2450 Prepared By/Date Checked By/Date Approved By/Date Customer confirmation Date History of revisions Edition Description Prepared
More informationUniversal 8-Bay Charger. for AA/AAA/C/D/9 NiMH & NiCd Rechargeable Batteries. Owner's Manual
Universal 8-Bay Charger for AA/AAA/C/D/9 NiMH & NiCd Rechargeable Batteries Owner's Manual Thank you for purchasing the Watson Universal 8-Bay Charger. Be sure to read this manual and note the precautions
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Nickel Metal Hydride Battery Model: 10306 (50AA2000) SPEC: 1.2V 2000mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel:
More informationSpecification. Cylindrical Li-ion battery. Type: Product model battery VER A Product Specification 3.6V 1400mAh Date 2005/1/3
Cylindrical Li-ion battery Specification Type: 18500 1 Product model 18500 battery VER A h d DATA SHEET TYPE ------------------------------- CYLINDRICAL MODEL --------------------------------- ICR18500
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Lithium Ion Cylindrical Battery Model: 30036 SPEC: 18500 1400mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel: 510.687.0388
More informationLFP-RCR123A Product Specification. Specification Approval Sheet
Page 1 of 8 Bao Tong USA dba Tysonic Battery 1032 East Main St., Alhambra, CA 91801 877-897-6648 (P) 626-576-2503 (F) WWW.TYSONICBATTERY.COM Specification Approval Sheet LFP-RCR123A rechargeable LiFePo4
More informationSHENZHEN CERROPOWER COMPANY LTD. Document Number: ERS-001 Edition: A Page 1 of 12 SPECIFICATION
Document Number: ERS-001 Edition: A Page 1 of 12 SPECIFICATION Model: CP ICR18650-2200mAh Design: ZHANG WEI Check: Yangxiaoliang Approved: Pengdongfang Document Number: ERS-001 Edition: A Page 2 of 12
More informationLITHIUM THIONYL CHLORIDE Computer Back-up Type ER14250-CB BRIEF SPECIFICATION
LITHIUM THIONYL CHLORIDE Computer Back-up Type ER14250-CB BRIEF SPECIFICATION Model: ER14250 (1/2AA Size) Bobbin Type Nominal Voltage: 3.6V Nominal Capacity: 1.2Ah Weight: About 13g ISO9001 Certified UL
More informationLithium Ion Rechargeable Cell
Page:1/6E Specifications Lithium Ion Rechargeable Cell High Energy Cylindrical Cell Cell Type: CMICR18650F8-2600mAh Prepared by: Checked by: Approved by: Li Hong Duan Hongkun Cheng Jianliang Publication
More informationPRODUCT SPECIFICATION. Rechargeable Nickel Metal Hydride Battery Model: GPTC206
PRODUCT SPECIFICATION Rechargeable Nickel Metal Hydride Battery Model: GPTC206 Revision History Revision Date Initiator Reason for Change 00 4 May 2006 AW Peng New Issue Prepared By AW Peng Approved By
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Ni-Cd rechargeable battery Model: 20305 SPEC: SC 2200mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com
More informationProduct Specification
1. SCOPE The product specification describes the requirement of the Cylindrical Lithium-ion Cell to be supplied to the customer by Bao Tong USA Inc. Should there be any additional information required
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Nickel Metal Hydride Battery Model: 10302 SPEC: AA 1.2V 1800mAh 10C Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp: 436 Kato Terrace,
More informationSHENZHEN PKCELL BATTERY CO., LTD. Polymer Li-ion Battery Technology Specification
Polymer Li-ion Battery Technology Specification Model:ICR18650 6600mAh 3.7V 1S3P Corporate name Customer confirmation Checked Approved Corporate seal Signed: Drafted by: Signed by: Document No.: QA.S.0221
More informationUNIVERSAL CHARGER FOR FS-E45R AND FS-B73R USER MANUAL FA-CH1
UNIVERSAL CHARGER FOR FS-E45R AND FS-B73R USER MANUAL FA-CH1 Thank you for choosing Vulta. The Vulta FA-CH1 Universal Charger is the easiest way to charge the batteries in your Vulta Blizzard FS-E45R or
More informationEEMB CO., LTD. Specification
ZJQM-RD-SPC-A0994 0.0 2015-8-14 1/9 EEMB CO., LTD Li-ion Battery Model: Capacity: 2000mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature Checked Approved Address:Room
More informationLi-Polymer Battery Technology Specification
Li-Polymer Battery Technology Specification Customer Part name Li-Polymer Battery Model No LIPO 103450 2000mAh 3.7V Serial No Produce No Approved by Drafted by WenFei Liang - 1 - Checked by Signed by Xiao
More informationLiFePO4 Instruction Manual. LFP12V50A LFP12V100A LFP12V200A 50Ah 100Ah 200Ah
LiFePO4 Instruction Manual LFP12V50A LFP12V100A LFP12V200A 50Ah 100Ah 200Ah Contents FEATURES... 2 SAFETY CHARACTERISTICS... 2 WARNING!... 3 CHARGING... 4 MAINTAINING THE BATTERY... 4 INSTALLATION... 4
More informationCTC Battery, Inc. Lithium Iron Phosphate Battery Specification
CTC Battery, Inc. Lithium Iron Phosphate Battery Specification Model: 12.8 V 19.8 Ah 10/25/2012 Rev 01 Robert Tan Copyright 2012 CTC Battery, Inc. All Rights Reserved Copyright 2012 CTC Battery, Inc. All
More informationSpecifications Model:
Batteryspace.com Spec. No.:SP052025-01 File No.:WI/Q PTD S047 E Ver:A/0 Date:2004/11/ Polymer Lithium Ion Battery Specifications Model: PR-052025 Approval Checked Draft 2700 Rydin Road, Unit C Richmond,
More informationNi-Cd Battery Product Specification
Ni-Cd Battery Product Specification SC1600 1. This specification governs the performance of the following Nickel-Cadmium Cylindrical cell and its stackup battery. SC BATTERY 16NC50 (To include all 1.6Ah
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Tenergy NiMH Rechargeable Battery Model: 10203-0 SPECS: 1.2V 5000mAh C Size (Flat Top) Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:,
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Model: SPEC: Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel: 510.687.0388 Fax: 510.687-0328 www.tenergybattery.com TABLE
More informationSoshine International. Li-ion Battery. Specification. Model: 18650USB Prepared Auditing Approved WUSUN L.XUN SILING
Li-ion Battery Specification Model: 18650USB-3.7-3000 Prepared Auditing Approved WUSUN L.XUN SILING 2018.08.28 2018.08.28 2018.08.28 1. Primary technical Parameters Type Rechargeable Lithium-ion Model
More informationDatasheet / Product specification Model: Solar AAA
1. Product drawing D1 = 10.5 mm d1 = 4.8mm±0.2 mm H1 = 44.5 mm 2. Scope: This specification is applicable to rechargeable NiMH battery, HR03 distributed under brandname RAVER. 3. Law & Regulation Compliances:
More informationSafety Guidelines. Handling instructions. the swiss power source
Handling instructions! Preventing Quality Problems To prevent the batteries of being discharged please observe the following rules. 1. Do not place batteries on a conductive surface (anti-static work mat,
More informationRechargeable Lithium Ion Battery Model : 18650HB3 1500mAh
Lithium Ion 18650HB3 1500mAh BCY-PS-HB3-Rev2 2012-08-14 2 PRODUCT SPECIFICATION Rechargeable Lithium Ion Battery Model : 18650HB3 1500mAh 20 YOIDO-DONG YOUNGDUNGPO-GU, SEOUL 150-721, KOREA TEL : (82) 2-3773-1114
More informationENGLISH. Datasheet. Polymer Li-ion Rechargeable Battery Pack
ENGLISH Datasheet Polymer Li-ion Rechargeable Battery Pack 1. Scope This specification shall be applied to polymer Li-ion Rechargeable Battery manufactured by RS Component. 2. Basic Product Characteristics
More informationSealed Rechargeable Nickel Cadmium N800AA/BTNP
1. SCOPE The specifications governs the performance of the following Nickel-Cadmium Cylindrical cell and its battery pack.. Model: NCAA800 Cell Size: AA ( :14.1 ±0.2 mm H: 48.0 ±0.5 mm) 2. DATA OF BATTERY
More informationRechargeable Lithium Ion Battery Model : 18650HE2 2500mAh
Lithium Ion LG 18650HE2 2500mAh BCY-PS-HE2-Rev0 2013-01-30 0 PRODUCT SPECIFICATION Rechargeable Lithium Ion Battery Model : 18650HE2 2500mAh 20 YOIDO-DONG YOUNGDUNGPO-GU, SEOUL 150-721, KOREA http://www.lgchem.com
More informationEEMB CO., LTD. Specification
EEMB CO., LTD Lithium Thionyl Chloride Battery Specification Energy Type Model: Capacity: ER14250 1200mAh Prepared Checked Approved Customer: Customer Approval (Customer confirmation): Signature Checked
More informationRechargeable Lithium Ion Battery Model : ICR18650 A2
1 (7) Rechargeable Lithium Ion Battery Model : ICR18650 A2 Revision History REVISION DATE ORIGINATOR REASON FOR CHANGE 0 2003-06-11 Yun, In Taeg Original Release Prepared Reviewed Yun, In Taeg Jung, Jae
More informationSpecification. High temperature NiCd Rechargeable AA Cell: 1.2V 900 mah
Specification High temperature NiCd Rechargeable AA Cell: 1.2V 900 mah (http://www.batteryspace.com) Address: 2700 Rydin Road, Unit C, Richmond, CA, 94804 Tel: 510-525-2328 Fax: 510-439-2808 Email: sales@batteryspace.com
More informationPRODUCT SPECIFICATION
Prepared LGC MED I BDC Approved LGC MED I BDC Document No. Date Yun, Su Hyun BCY-PS-MF1-Rev 211-8-19 Ahn, Soon Ho Description Lithium Ion ICR1865 MF1 215mAh Rev Rechargeable Lithium Ion Battery Model :
More informationCylindrical Li-ion Battery Specification
Cylindrical Li-ion Battery Specification MODEL: Li-ion 18650 2600mAh 3.7V Prepared By/Date Checked By/Date Approved By/Date Feb,27,2014 Signature/Date Customer Approval Company Name Company Stamp Page
More informationSPEC. NO. KL24H95x.XXX/ KL24HS95x.XXX Series ISSUE DATE
DESCRIPTION Lithium Ion Battery For E-bike EDITION B PAGE 1/10 1. Applicability The specification is applicable to Mondia Lithium Ion Rechargeable batteries 1.1 Product code KLxxHyyz.nnn E-bike Battery
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Rechargeable Lithium Ion Battery Model : Brown 18650 3000mAh 24C, Bldg. B, Xianhua Mingyuan, Qinghu Road, Longhua Street, Longhua www.sc30power.com Contents Contents.. 2 1. General
More informationThis specification is applicable to the Nickel -Metal Hydride rechargeable batteries for type H320BC Model : H320BC
Document No:H320BC Page 1 of 7 1 Scope This specification is applicable to the Nickel -Metal Hydride rechargeable batteries for type H320BC Model : H320BC 2 Technical Parameters Items Units Parameters
More informationSpecification Approval Sheet
Page No. 1/11 Specification Approval Sheet Model:IFR14500EC-600mAh Prepared by Approved by R&D Approved by SALES Approved by QA Signature Date Customer Approval Company Name : Company Stamp : O CELL New
More informationProduct Specifications
File No:E-SPE-1106-01 Ver: 1.0 Page: 1/ 10 Type:Polymer Li-ion Rechargeable Battery Model:DTP605068-3P Specification:3.7V/6000mAh Prepared By/Date Checked By/Date Approved By/Date Yang qin 2015/11/06 Customer
More informationBattery Information Sheet
Battery Information Sheet Polymer Lithium-Ion Rechargeable Battery This information sheet is applicable to the polymer lithium-ion battery used in the Fitbit Alta HR, Model FB408 Fitbit is providing this
More informationSpecification Approval Sheet
Name: Lithium Polymer Battery Model: 053759 SPEC: Number: 3.7V/1100mAh GMB0812310964 Approved By Checkup Make Signature Date Customer Company Name: Confirmation Stamp: Specification Modification Records
More informationCOIN CELL CR2477 BRIEF SPECIFICATION
COIN CELL CR2477 BRIEF SPECIFICATION Model: CR2477 Nominal Voltage: 3.0V Nominal Capacity:1000mAh Standard Discharge with load: 1.5KΩ Weight: 9.5g Stainless steel container ISO9001 Certified UL Certified
More informationNickel Metal Hydride Battery Pack. User Handbook
Nickel Metal Hydride Battery Pack User Handbook Contents Contents... 3 Safety Instructions... 4 Description... 5 Operation... 6 Battery Charger... 6 Battery Charging... 7 Battery Discharging... 8 Battery
More informationBUTTON CELL CR2450S BRIEF SPECIFICATION
BUTTON CELL CR2450S BRIEF SPECIFICATION Model: CR2450S Nominal Voltage: 3V Nominal Capacity:550mAh Standard Discharge with load: 15KΩ Weight: 6.8g Stainless steel container ISO9001 Certified UL Certified
More informationMODEL NO:NI-MH 4 AA V
(Model No)NI-MH 4 AA1800 4.8V (DATE):26/04/2017 VIGOR POWER NIMH BATTERIES SPECIFICATIONS MODEL NO:NI-MH 4 AA1800 4.8V (PREPARED BY): (CHECKED BY ): (APPROVED BY): DATE: DATE: DATE: (Type):NI-MH 4 AA1800
More informationLi-ion Cylindrical Battery Specification. Nominal Capacity: 2600 mah. page 1 of 7
Li-ion 18650 Cylindrical Battery Specification MODEL: EC- C5 Nominal Capacity: 2600 mah page 1 of 7 Content 1.MODIFIED LIST... 2 2.Scope... 3 3. Initial Dimension... 3 4.Specification... 4 5 General Performance...
More informationSPECIFICATION FOR VH F CONTENTS
CONTENTS 1/ SCOPE 2/ GENERAL ELECTRICAL CHARACTERISTICS 3/ GENERAL MECHANICAL CELL SPECIFICATION 4/ CAPACITY 5/ CHARGE RECOMMENDATIONS 6/ CYCLE LIFE 7/ CELL AND BATTERY MANAGEMENT 8/ SPECIFICATION APPROVALS
More informationHigh-Power Type (Spiral structure, Laser-sealing) CR18505SL BRIEF SPECIFICATION
Lithium Manganese Dioxide High-Power Type (Spiral structure, Laser-sealing) CR18505SL BRIEF SPECIFICATION Model: CR18505SL Nominal Voltage: 3.0V Nominal Capacity: 2800mAh Weight: 35g Manufacturer: EEMB
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Polymer Lithium-Ion Battery Model: 13212223 SPEC: Number: 3.7V/50000mAh YKZ0706200643Y 1.Scope: This Document describes the Product Specification of chargeable Polymer
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Tenergy Li-Ion Power Cell Model: 30265 SPECS: 3.2V 130Ah Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergy.com 1.
More informationLi-ion Rechargeable Button Cell. Specification
Customer: Specification Model: LIR2032 Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved. 2.Kindly please contact
More informationLithium Polymer Battery DATA SHEET
Lithium Polymer Battery DATA SHEET Battery Model : LP703448 Prepared Authorized Approved Zhe Hao, Wei Feng, Lee Ji de, Wong Manufacturer: EEMB Co., Ltd. Website: http://eemb.com LP703448 Datasheet This
More informationHigh-Power Type (Spiral structure, Laser-sealing) CR34615SL BRIEF SPECIFICATION
Lithium Manganese Dioxide High-Power Type (Spiral structure, Laser-sealing) CR34615SL BRIEF SPECIFICATION Model: CR34615SL Nominal Voltage: 3.0V Nominal Capacity: 10000mAh Standard Discharge Current: 10mA
More informationLithium Polymer Rechargeable Battery Pack Tested and approved to UN38.3
ENGLISH Datasheet RS Pro Article: 1449405 Lithium Polymer Rechargeable Battery Pack Tested and approved to UN38.3 1. Scope This specification shall be applied to Lithium polymer rechargeable battery. 2.
More informationSpecification. Li-polymer Rechargeable Battery
Specification of Li-polymer Rechargeable Battery Model No.: LP-573442-1S-3 Reported by: 陈声宇 Date: Dec,13,2010 Checked by: 侯刚琪 Date: Dec,13,2010 Approved by: 陈军 Date: Dec,14,2010 1. Scope This specification
More informationPhosphate-base Lithium-ion Battery Pack Model:LFP V 1350Ah Product Specifications Lithium Energy Solution 1/8
Phosphate-base Lithium-ion Battery Pack Model:LFP1350-48 48V 1350Ah Product Specifications Lithium Energy Solution 1/8 1. Product overview LFP1350-48 Products are mainly for customized development of high
More informationData Sheet BP v 100Ah LiFePO 4 (Peli TM Case Kit)
Data Sheet BP2589-12v 100Ah LiFePO 4 (Peli TM Case Kit) Product Name Battery Model Spec File Revision LiFePO4 Battery in Peli TM Case LiFePO4-11198141 4S5P 12.8V 100Ah A2 Amendment Records Revision Description
More informationAC/DC Compact Charger. for Digital Camera and Camcorder Batteries. Owner's Manual. Please read before using this equipment.
AC/DC Compact Charger for Digital Camera and Camcorder Batteries Owner's Manual Please read before using this equipment. Thank you for purchasing the Watson AC/DC Compact Charger. Browse through this
More informationSPECIFICATION OF PRODUCT
PRODUCT SPECIFICATION SPB605060H (Rechargeable Lithium Ion Battery) Page 1 / 12 SPECIFICATION OF PRODUCT Rechargeable Lithium Ion Battery Model : SPB605060H Issued Checked Approved Date ENERTECH INTERNATIONAL,
More informationSPECIFICATIONS SEALED NICKEL CADMIUM RECHARGEABLE BATTERY N1700SC-HTP
1. SCOPE The specifications governs the performance of the following Nickel-Cadmium Cylindrical cell and its battery pack.. Model: N17SC-HTP Cell Size: SC ( :22.1 ±.2 mm H: 42. ±.5 mm) 2. DATA OF BATTERY
More informationSpecification Approval Sheet
Page No. 1/11 Specification Approval Sheet Model:IFR18650EC-1.5Ah Prepared by Approved by R&D Approved by SALES Approved by QA Bing Zeng/2012.4.26 Wu Chen/2012.4.26 SiBiao Jin/2012.4.26 YG liang/2012.4.26
More informationSpecification. Li-ion Rechargeable Battery
Specification of Li-ion Rechargeable Battery Model No.: 18650CA-2S-3J Reported by: 陈声宇 Date: Oct,17,2013 Checked by: Approved by: Date: Date: 1. Scope This specification describes the definition, technical
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Tenergy Lithium-ion Polymer Pack Model: 34011 SPECS: 3.7V 250mAh LiPo 602025 with PCM and Bare Leads Approved By Checkup Make Signature Date Customer Confirmation Company
More informationEEMB CO., LTD. Specification
ZJQM-RD-SPC-A0670 0.0 2015-1-27 1/7 EEMB CO., LTD Polymer Li-ion Battery Model: Capacity: 2200mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature Checked Approved
More informationLITHIUM / THIONYL CHLORIDE High Power Type ER18505M BRIEF SPECIFICATION
LITHIUM / THIONYL CHLORIDE High Power Type ER18505M BRIEF SPECIFICATION Model: ER18505M Spirally Wound Type Nominal Voltage: 3.6V Nominal Capacity: 3.2Ah Weight: 30g Stainless steel container with PVC
More informationApproval Sheet for. Lithium and Iron Disulfide Battery. Model: LFB-AAA
Approval Sheet for Lithium and Iron Disulfide Battery Model: LFB-AAA AA Portable Power Corp (http://www.batteryspace.com) Address: 2700 Rydin Road, Unit C, Richmond, CA, 94804 Tel: 510-525-2328, Fax: 510-439-2808
More information