Battery powered crimping tool

Transcription

1 Battery powered crimping tool, Series New: E 0/-L by lauke Verbindungen mit System The Power of Partnership

2 Für auswechselbare Einsätze der Serie 22, Schmalpressung Crimping and cutting tools Battery powered crimping, cutting and universal tools E 0/-L Battery powered crimping tool mm² Integrated pressure test with optical and acoustical signal in case of failure Ergonomic design for ideal one hand operation High performance 18 V Lithium-Ion Batteries offering 0% higher capacity and extremely short charging times Characteristics For interchangeable dies, series, narrow crimping Electronic control and inspection of the crimping cycle Analysis of data via optical interface and USB adapter One-push button operational concept for easy handling Two-components plastic housing with soft-filler conveys a comfortable and safe feeling LED illuminates working space Quick crimping cycles for ensure efficient operation Power save function by motor stop (automatic stop) once crimp is completed Crimping heads rotate Quick motor stop guarantees highest safety for the operator Automatic retraction once crimp is completed Manual retraction in case of need Multifunctional LED indicates maintenance and battery control Environment-friendly hydraulic oil, quickly bio-degradable Technical Data Crimping force: 0 kn Stroke: 12 mm Crimp range: mm² Weight incl. battery: 2,4 kg Crimping cycle: 3 s bis 7 s (depending on size) Number of crimps: ca. 10 mm² Cu DIN Battery voltage: 18 V Battery capacity: 1, Ah, Li-Ion Charging time: 1 min. Ambient temperature: -20 C bis +40 C Item Battery powered crimping tool mm² Scope of supply Battery 18 V / 1, Ah, Li-Ion Charger for Li-Ion batteries, 230 V mains operated Plastic case E0L RAL1 LGL1 0L Accessories Battery 18 V / 3.0 Ah, Li-Ion Mains adapter 18V, 230 V mains operated Digital meter for force and pressure measurement Measuring adapter Series Force sensor 70 kn RAL2 NG2230 TC1S MA TF70L

3 Isolierte Quetschkabelschuhe und Stiftkabelschuhe Series E 0/-L HR Isolierte Quetschkabelschuhe und Stiftkabelschuhe Copper tubular cable lugs and connectors standard design HISQ4 HR HR HR HR HR HR10 18 HR HR240 HIS Insulated tubular cable lugs and connectors Insulated pin terminals HISQ4 HIS 16 HIS16 2 HIS2 3 HIS3 0 HIS0 70 HIS70 9 HIS9 HF Tubular cable lugs and compression joints for fine stranded conductors mm² HA4 7 HF 16 HF16 2 HF2 3 HF3 0 HF0

4 Runddrückeinsätze für Al- und Cu-Sektorleiter Series HD Copper compression cable lugs and connectors acc. to DIN 4623 / DIN mm² Code Crimp width mm HA4 HD HD HD HD HD HD HD18 2 HQ Copper solderless terminals (DIN 46234) and pin terminals (DIN 46230) mm² HA4 7 HQ 16 HQ16 2 HQ2 3 HQ3 0 HQ0 HRU Pre-rounding dies for sector-shaped Al and Cu conductors 3- and 4-core sector-shaped conductors mm² se mm² sm Conductor Ø mm Pre-rounding width mm HRU4 HRU 4,1 4, HRU16, HRU32 6, HRU03 7, HRU HRU970, HRU , HRU HRU1810 1, HRU , HRU ,3 12 HA Aluminium compression cable lugs and connectors mm² Code Crimp width mm HA4 HA HA HA HA HA HA HA10 2 7

5 Series HAD Compression joints for full tension connections of Aldrey conductors acc. to DIN EN 0182 mm² Code Crimp width mm HA4 2 HAD HAD HAD HAD HAD HC Runddrückeinsätze für Al- und Cu-Sektorleiter Clamps, C-type 9 16 HRU4 HC16 4,1 2 HC2 3 HC3 HAE Aderendhülsen Cable end-sleeves AE22 20 HAE HAE HAE HAE HAE0 20 HZAE Zwillings-Aderendhülsen Twin cable end-sleeves 2 4 ZAE x 4 HZAE x 6 HZAE x HZAE 20 2 x 16 HZAE16 20

6 Aderendhülsen Zwillings-Aderendhülsen 2 x 4 ZAES Series HAES Cable end-sleeves Special trapezoid crimp for compacted fine stranded conductors AES22 20 HAES HAES HAES HAES HAES0 20 HZAES Twin cable end-sleeves Special trapezoid crimp for compacted fine stranded conductors Subject to change without notice. BRE0LPPE09GB /09 I