COURSE: Power Generation and Economics DEPARTMENT: Electrical and Electronics Engineering ACADEMIC YEAR: COURSE CODE: 15EE42 SEMESTER: IV TOTA

Size: px
Start display at page:

Download "COURSE: Power Generation and Economics DEPARTMENT: Electrical and Electronics Engineering ACADEMIC YEAR: COURSE CODE: 15EE42 SEMESTER: IV TOTA"

Transcription

1

2

3

4

5

6 COURSE: Power Generation and Economics DEPARTMENT: Electrical and Electronics Engineering ACADEMIC YEAR: COURSE CODE: 15EE42 SEMESTER: IV TOTAL CONTACT HOURS: 50 hrs. DURATION OF IA: 1 hr. IA MARKS: 20 DURATION OF SEE: 3 hrs. SEE MARKS: 80 OVERVIEW: This is one of the important core subjects which an electrical engineering student should study. In this course period, the student will learn the basics of Electrical Power Generation, The sources which are available in nature from which electric power can be harnessed. Also they study about Substation and Grounding in power system. PRE REQUISITES 1. Basic knowledge about electrical power generation. 2. Basic knowledge about types of electrical power and its components. 3. Basic knowledge about working principle of Motors and Generators. COURSE OBJECTIVES The main objectives of this course are 1. To make the students study about the different sources of electrical power generation. 2. To teach the students about the process involved for harnessing electrical power from different sources available. 3. To teach the students about the general layout of a substation. 4. To explain the necessity of tariffs and importance of power factor improvement. 5. To explain the necessity and different methods of grounding. COURSE OUTCOMES At the end of the course student will be able to: CO210.1 Discuss about the different sources available for electrical power generation. CO210.2 Analyse the process involved in generating electrical power using different sources and their environmental issues. CO210.3 Explain the importance of economic aspects in power generation. CO210.4 CO210.5 CO210.6 Acquire knowledge about the effects of power factor in setting up the tariff and its improvement. Explain the operation of a substation, its types, and different Bus bar schemes in a substation. Summarize the importance of grounding systems and different types of grounding in power system engineering.

7 CO PO/PSO MAPPING CO S PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO1 PO1 PO1 PSO PSO PS O3 CO CO CO CO CO CO CO

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22 Faculty: D.BABU RAJENDRA PRASAD COURSE: MANAGEMENT AND ENTREPRENEURSHIP Semester: V Academic Year: IA Marks: 20 Exam Hours: 3 Teaching Hours: 40 Exam Marks: 80 COURSE OUTCOMES COURSE CODE: 15EE51 Upon successful completion of the course, the students will be able to CO1 ILLUSTRATE:the management characteristics, functions and importance of planning(l2) CO2 CATEGORISE:the types of organizations, nature of directing, and steps in controlling of the organization (L1) CO3 DISCUSS:the evaluation the social responsibility and concept of entrepreneurship and intra preneurship(l1) CO4 ANALYSE:the objectives, sickness of SSI and impact of globalization, schemes of institutions on SSI (L2) CO5 JUSTIFY:the need and significance of project management with report of different control techniques(l3) CO mapping with POs and PSOs (Relevance*) PO PO PO PO PO PO PO PO PO1 PO1 PO1 PSO PSO PSO CO PO CO CO CO CO CO CO * Note: 1- Low correlation, 2 Medium correlation, 3 Strong correlation CO target for the current academic year Continuous Internal Semester End Examination Evaluation Course Target in Target in % 50 Outcomes % CO1 60 CO2 60 Attainment Level CO % students scoring more than set 1

23 CO4 CO5 target 60 60% students scoring more than set target 60 70% students scoring more than set target 2 3 Weightage - CIE 20% + SEE 80%

24 Faculty: RASHMI S COURSE: MICROCONTROLLER COURSE CODE: 15EE52 Semester: V Academic Year: IA Marks: 20 Exam Hours: 3 Teaching Hours: 50 Exam Marks: 80 COURSE OUTCOMES Upon successful completion of the course, the students should be able to CO52.1 [L2] Describe the complete architecture of 8051, functions of various registers and its operation with its uses. CO52.2 [L2] Describe the complete instruction set of 8051and [L5] Write programs in AL for simple applications CO52.3 [L2 ] Describe the operations of Timers, Counter and Serial port communication as well [L3]Design and [L5] Write programs in C for applications related to Timer, Counter and Serial port communication. CO52.4 [L5] Interface hardware like DC Motor, Stepper motor, ADC, DAC, LCD, Keyboard, 8255 etc., to 8051 CO mapping with POs and PSOs (Relevance*) CO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3 CO CO CO CO CO * Note: 1- Low correlation, 2 Medium correlation, 3 Strong correlation CO target for the current academic year Continuous Internal Evaluation Semester End Examination Course Outcomes Target in % Target in % 40% CO1 60 CO2 60 Attainment Level CO % students scoring more than set target 1 CO % students scoring more than set target 2 70% students scoring more than set target 3 Weightage - CIE 20% + SEE 80%

25 COURSE: POWER ELECTRONICS COURSE CODE: 15EE53 Department: EEE No. of lecture hours/week - 4 Academic Year: Semester: VII Teaching Hours: 50 Exam Hours: 3 Exam Marks: 80 IA Marks: 20 Prerequisites: Knowledge of Laplace Transformation, Fourier Analysis, Kirchhoff s Voltage Law, basic concepts of transistors and diodes. Course Overview After studying this subject, students will be able to analyse different power electronic converters Course Objectives The objectives of this course are to Give an overview of applications power electronics, different types of power semiconductor devices, their switching characteristics. Explain power diode characteristics, types, their operation and the effects of power diodes on RL circuits. Explain the techniques for design and analysis of single phase diode rectifier circuits. Explain different power transistors, their steady state and switching characteristics and limitations. Explain different types of thyristors, their gate characteristics and gate control requirements. Explain the design, analysis techniques, performance parameters and characteristics of controlled rectifiers, DC- DC, DC -AC converters and Voltage controllers Course Outcomes After completing this course students will be able to CO1 CO2 CO3 CO4 CO5 Explain the types of power diodes, their characteristics and analyze single phase diode rectifiers Analyze steady state, switching characteristics and gate control requirements of different power transistors and their limitations Describe different types of thyristors, their operation, gate characteristics, gate control requirement along with applications and design of snubber circuits Analyze single phase and three phase thyristor controlled rectifiers and AC voltage controllers with R and RL load Analyze the principle of operation of DC AC converters and DC- DC

26 converters Course Outcomes PO 1 PO 2 PO 3 PO 4 PO 5 PO 6 PO 7 PO 8 PO 9 PO 10 PO 11 PO 12 PSO 1 PSO 2 PSO 3 CO CO CO CO CO Avg

27

28 COURSE ELECTRICAL ESTMATION AND COSTING (Professional Elective) COURSE CODE 15EE553 DEPARTMENT Electrical and Electronics Engineering SEMESTER V ACADEMIC YEAR TOTAL CONTACT HOURS 40 hrs. DURATION OF IA 1 hr. IA MARKS 20 DURATION OF SEE 3 hrs. SEE MARKS 80 COURSE SYLLABUS MODULE 1 PRINCIPLES OF ESTIMATION 8 Hours Introduction to Estimation and Costing, Electrical Schedule, Catalogues, Market Survey and Source Selection, Recording of Estimates, Determination of Required Quantity of Material, Labour Conditions, Determination of Cost Material and Labour, Contingencies, Overhead Charges, Profit, Purchase System, Purchase Enquiry and Selection of Appropriate Purchase Mode, Comparative Statement, Purchase Orders, Payment Of Bills, Tender Form, General Idea about IE Rule, Indian Electricity(IE) Act and IE Rules - 29,30,45,46,47,50,51,54,55,77 and79 MODULE 2 DOMESTIC WIRING ESTIMATION 8 Hours Introduction, Distribution of energy in a Building, PVC Casing and Capping, Conduit Wiring, Desirabilities of Wiring. Types of cables used in Internal Wiring, Multi Strand Cables, Voltage Grading and Specification of Cables. Main Switch and Distribution Board, Conduits and its accessories and Fittings. Lighting Accessories and Fittings, Types of Fuses, Size of Fuse, Fuse Units, Earthing Conductor. General rules for wiring, Design of Lighting Points (Refer to Seventh Chapter of the Textbook), Number of Points, Determination of Total Load, Number of Sub Circuits, Ratings Main Switch and Distribution Board and Size of Conductor. Current Density, Layout. MODULE 3 SERVICE MAINS AND DESIGN AND ESTIMATION OF POWER CIRCUITS 8 Hours Introduction, Types, Estimation of Underground and Overhead Service Connections. Introduction, Important Considerations Regarding Motor Installation Wiring, Input Power, Input Current to Motors, Rating of Cables, Rating of Fuse, Size of Condit, Distribution Board Main Switch and Starter. MODULE 4 ESTIMATION OF OVERHEAD TRANSMISSION AND DISTRIBUTION LINES 8 Hours (Review of Line Supports, Conductor Materials, Size of Conductor for Overhead Transmission Line, Types of Insulators) [No Question Shall be Set from the Review Portion]. Cross Arms, Pole Brackets and Clamps, Guys and Stays, Conductors Configuration Spacing and Clearances, Span Lengths, Lightning Arrestors, Phase Plates, Danger Plates, Anti Climbing Devices, Bird Guards, Beads of Jumpers, Muffs, Points to be Considered at the

29 Time of Erection of Overhead Lines, Erection of Supports, Setting of Stays, Fixing of Cross Arms, Fixing of Insulators, Conductor Erection, Repairing and Jointing of Conductors, Dead End Clamps, Positioning of Conductors and Attachment to Insulators, Jumpers, Tee-Offs, Earthing of Transmission Lines, Guarding of Overhead Lines, Clearances of Conductor From Ground, Spacing Between Conductors, Important Specifications. MODULE 5 ESTIMATION OF SUBSTATIONS 8 Hours Main Electrical connection, Graphical Symbols for Various Types of Apparatus and Circuit Elements on Substation Main Connection Diagram, Single Line Diagram of Typical Substations, Equipment for Substation, Substation Auxiliaries Supply, Substation Earthing. OVERVIEW: This is one of the professional elective subjects which an electrical engineering student should study. In this course period, the student will learn about the Basics of and Need for Estimation and Costing. The students study about the process that is carried out while doing an estimation for electrical work such as for Domestic premises, Service mains, Power circuits, Substations and Overhead Transmission lines. The mere cost of all the components are tabulated and the final estimation table is prepared. PRE-REQUISITES 4. Basic knowledge about domestic wiring. 5. Basic knowledge about electrical components used in Transmission and Distribution. 6. Basic knowledge about Substations. COURSE OBJECTIVES The main objectives of this course are to make students 6. Understand the Basics of Estimation and Costing. 7. Discuss about the need for Market Survey, Source selection, Determination of material and Labour cost. 8. Prepare an Estimate of the materials required for any electrical installation and calculate the approximate cost for the job COURSE OUTCOMES At the end of the course student will be able to Explain the purpose of estimation and costing and the processes involved in Estimating and C305.1 preparing the final cost. Discuss about the distribution of energy in a building, General rules for wiring and its methods, C305.2 wiring accessories and fittings, fuses and types of fuses, types of service mains. C305.3 Design and estimate the cost for a power circuit and Service mains. C305.4 Prepare an estimate of overhead transmission and distribution system. C305.5 Choose the main components for a substation and prepare single line diagram for a substation.

30 CO PO/PSO MAPPING PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3 C C C C C C

31

32

33

34

35

36

37

38

39

Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4

Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4 Course Name: POWER ELECTRONICS Course Code: EE603 Credit: 4 Prerequisites: Sl. No. Subject Description Level of Study 01 Basic Electronics p n junction, Diode, BJT, MOSFET 1 st Sem, 2 nd Sem 02 Circuit

More information

Academic Course Description

Academic Course Description BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,

More information

DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN ELECTRICAL AND ELECTRONICS ENGINEERING III YEAR M SCHEME V SEMESTER.

DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN ELECTRICAL AND ELECTRONICS ENGINEERING III YEAR M SCHEME V SEMESTER. DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN ELECTRICAL AND ELECTRONICS ENGINEERING III YEAR M SCHEME V SEMESTER 2015 2016 onwards ELECTRICAL ESTIMATION AND ENERGY AUDITING CURRICULUM DEVELOPMENT CENTRE

More information

K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013

K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013 S.NO K.L.N. COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Course Outcomes, PO & PSO Mapping Regulation 2013 SEMESTER ANNA UNIVERSITY, CHENNAI - AFFILIATED INSTITUTIONS R 2013

More information

SYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test)

SYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test) ANNEXURE I SYLLABUS FOR ELECTRICAL SUPERVISOR CERTIFICATE OF COMPETENCY (SCC MV) Electrical Engineering Paper (Written Test) Paper I & Paper II for General Category of S.C.C. Examination Paper I & Paper

More information

Workforce Development Learning Center Course Outline. Emergency Vehicle Driving FIP 3601

Workforce Development Learning Center Course Outline. Emergency Vehicle Driving FIP 3601 Revision Date: Workforce Development Learning Center Course Outline Course Title: A maximum of 30 values Course Number: State-assigned number Course Objectives: List the primary learning objectives Emergency

More information

Course Name: Electric Drives Course Code: EE 701 Credit: 4

Course Name: Electric Drives Course Code: EE 701 Credit: 4 Course Name: Electric Drives Course Code: EE 701 Credit: 4 Prerequisites: Sl. No. Subject Description Level of Study 01 Electrical Machine 02 Power Electronics DC Motor, Induction Motor Rectifier, Inverter(1

More information

S.C.C. Syllabus. Note 3 : A candidate qualifying in part 5 need not qualify further in part 12. SYLLABUS FOR SUPERVISORS. Part-1

S.C.C. Syllabus. Note 3 : A candidate qualifying in part 5 need not qualify further in part 12. SYLLABUS FOR SUPERVISORS. Part-1 S.C.C. Syllabus Certificate For :- Parts Compulsory Wiring for systems not exceeding 650 Volts. : 1 & 2 D.C. Apparatus not exceeding 650 Volts. : 1, 2 & 3 A. C. Apparatus not exceeding 650 Volts. : 1,

More information

ELECTRICAL TECHNOLOGY 3 March 2008

ELECTRICAL TECHNOLOGY 3 March 2008 I. Course Description ELECTRICAL TECHNOLOGY 3 March 2008 The purpose for this course is to instruct potential electricians in the skills necessary for entry into the job market. During this course, the

More information

ITT Technical Institute. ET3480T Power Systems Onsite Course SYLLABUS

ITT Technical Institute. ET3480T Power Systems Onsite Course SYLLABUS ITT Technical Institute ET3480T Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 67 (41 Theory Hours, 26 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: ET3380T Power

More information

Sl. No. Subject Description Level of Study 01 Power Different types of converters, inverters. 6 th Sem Electronics 02 Power System I& II

Sl. No. Subject Description Level of Study 01 Power Different types of converters, inverters. 6 th Sem Electronics 02 Power System I& II Course Name: Power System III Course Code: EE70A Credit: Prerequisites: Sl. No. Subject Description Level of Study 0 Power Different types of converters, inverters. 6 th Sem Electronics 0 Power System

More information

SUBSTATION DESIGN TRAINING

SUBSTATION DESIGN TRAINING 2017 SUBSTATION DESIGN TRAINING ADVANCE ELECTRICAL DESIGN & ENGINEERING INSITUTE (Registered under MSME& An ISO 9001:2008 CERTIFIED) Training Centre: Advance Group of Institutions C-1, Second Floor Near

More information

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. AUTOMOBILE ELECTRICAL SYSTEM (Code: )

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. AUTOMOBILE ELECTRICAL SYSTEM (Code: ) GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum AUTOMOBILE ELECTRICAL SYSTEM (Code: 3330203) Diploma Programme in which this course is offered Semester in which offered 3 rd Semester

More information

Question Bank ( ODD)

Question Bank ( ODD) Programme : B.E Question Bank (2016-2017ODD) Subject Semester / Branch : EE 6703 SPECIAL ELECTRICAL MACHINES : VII-EEE UNIT - 1 PART A 1. List the applications of synchronous reluctance motors. 2. Draw

More information

FUNDAMENTALS OF POWER DISTRIBUTION SAIEE-1337-V : 2 CPD credits : Category 1

FUNDAMENTALS OF POWER DISTRIBUTION SAIEE-1337-V : 2 CPD credits : Category 1 THE SOUTH AFRICAN INSTITUTE OF ELECTRICAL ENGINEERS FUNDAMENTALS OF POWER DISTRIBUTION SAIEE-1337-V : 2 CPD credits : Category 1 OVERVIEW : 1. Introduction to Distribution, Transmission and Generation

More information

Academic Course Description

Academic Course Description BME 503 FLUID POWER SYSTEMS Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME 503 FLUID POWER SYSTEMS Fifth Semester, 2015-16

More information

CENTRAL TEXAS COLLEGE AERM 1445 AIRCRAFT ELECTRICAL SYSTEMS-A. Semester Hours Credit: 4 INSTRUCTOR: OFFICE HOURS:

CENTRAL TEXAS COLLEGE AERM 1445 AIRCRAFT ELECTRICAL SYSTEMS-A. Semester Hours Credit: 4 INSTRUCTOR: OFFICE HOURS: A. INTRODUCTION CENTRAL TEXAS COLLEGE AERM 1445 AIRCRAFT ELECTRICAL SYSTEMS-A Semester Hours Credit: 4 INSTRUCTOR: OFFICE HOURS: A. An aviation maintenance technician must understand the basic electrical

More information

Vtusolution.in ELECTRICAL DESIGN ESTIMATION & COSTING. VIII Semester 10EE81: ELECTRICAL DESIGN ESTIMATION AND COSTING. Exam : 04. Hours.

Vtusolution.in ELECTRICAL DESIGN ESTIMATION & COSTING. VIII Semester 10EE81: ELECTRICAL DESIGN ESTIMATION AND COSTING. Exam : 04. Hours. VIII Semester : ELECTRICAL DESIGN ESTIMATION AND COSTING SUBJECT CODE : IA Marks : 25 No. of Lecture Exam : 04 Hrs./ Week Hours : 03 Total No. of Lecture Exam : 52 Hrs. Marks : 100 UNIT - 1 PART - A GENERAL

More information

Electrical Engineering Fundamentals Ac Circuit Analysis

Electrical Engineering Fundamentals Ac Circuit Analysis We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with electrical engineering

More information

EM - Electromobility and Electrical Aircraft Systems

EM - Electromobility and Electrical Aircraft Systems Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 709 - EE - Department of Electrical Engineering

More information

University Of California, Berkeley Department of Mechanical Engineering. ME 131 Vehicle Dynamics & Control (4 units)

University Of California, Berkeley Department of Mechanical Engineering. ME 131 Vehicle Dynamics & Control (4 units) CATALOG DESCRIPTION University Of California, Berkeley Department of Mechanical Engineering ME 131 Vehicle Dynamics & Control (4 units) Undergraduate Elective Syllabus Physical understanding of automotive

More information

Class # Percentage of portion covered Reference Cumulative 12% 12% Chapter Title / Reference Literature 1-7 RB , 19 TB

Class # Percentage of portion covered Reference Cumulative 12% 12% Chapter Title / Reference Literature 1-7 RB , 19 TB CMR Institute of Technology, Bangalore Department(s): Electrical and Electronics Engineering Semester: 08 Section(s): - Electrical Design, Estimating and Costing 10EE81 Lectures/week: 05 Course Instructor(s):

More information

COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion

COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion COURSE 4-9 March, 2018 Auditorium 1003, Mayer Bld. Electrical Engineering Dept. Technion Robust Power Semiconductor IC Systems The course conveys a solid understanding of the use of modern semiconductor

More information

Department of Technology Fall 2004

Department of Technology Fall 2004 Department of Technology Fall 2004 EET 352 ELECTRICAL POWER TECHNOLOGY Instructor: Prof. Vigs Chandra, Ph.D. Telephone: 859-622-1187 E-mail: vigs.chandra@eku.edu Web: http://www.technology.eku.edu/facstaff/chandra/

More information

Aerial Operations. Name: Frank Ennist

Aerial Operations. Name: Frank Ennist DEPARTMENT OF FINANCIAL SERVICES Division of State Fire Marshal Bureau of Fire Standards & Training Title: Master Syllabus Date: October 3, 2017 Aerial Operations Course Title Aerial Apparatus Operations

More information

Electrical Systems and Fault Finding

Electrical Systems and Fault Finding Unit 31: Unit code Electrical Systems and Fault Finding A/615/1500 Unit level 4 Credit value 15 Introduction Electrical systems can be found in a very wide range of locations such as in manufacturing facilities,

More information

Auto Service Technician

Auto Service Technician Auto Service Technician Organization Washburn Institute of Technology Program Number 47.0604 Instructional Level Certificate Target Population Grades 11 & 12 Post-secondary Description The Auto Service

More information

Customer Training Catalog Training Proposal. Training Description for Network Energy COMMERCIAL IN CONFIDENCE 1

Customer Training Catalog Training Proposal. Training Description for Network Energy COMMERCIAL IN CONFIDENCE 1 Customer Catalog Proposal Description for Network Energy COMMERCIAL IN CONFIDENCE 1 Customer Catalog Proposal CONTENTS 1 Path... 3 1.1 Power Supply Path... 4 1.2 Data Center Facility Path... 5 1.3 UPS

More information

Cumulative Percent Frequency Percent Valid Percent

Cumulative Percent Frequency Percent Valid Percent Frequency Table Fully Online Hybrid Online Partially Online H_10 Course Type Frequency 868 24.7 24.7 24.7 1735 49.3 49.3 74.0 832 23.6 23.6 97.6 84 2.4 2.4 100.0 H_13 Period Frequency 1162R 100.0 H_14

More information

Circuit Concepts (Residential)

Circuit Concepts (Residential) Youth Explore Trades Skills Circuit Concepts (Residential) Description This Activity Plan will allow students to understand how electrical circuits work in a home. Students will also gain knowledge of

More information

Scope for Electrical Machine Design. Objectives. Design and Engineering. Course Description. 23-Dec-16 DESIGN OF ELECTRICAL MACHINES AN OVERVIEW

Scope for Electrical Machine Design. Objectives. Design and Engineering. Course Description. 23-Dec-16 DESIGN OF ELECTRICAL MACHINES AN OVERVIEW SNS COLLEGE OF ENGINEERING (Accredited by NAAC-UGC with A Grade, Approved by AICTE, Recognized by UGC and Affiliated to Anna University, Chennai) COIMBATORE 641 107 DEPARTMENT OF ELECTRICAL AND ELECTRONICS

More information

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad

INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :

More information

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM. Course Title: D C MACHINES AND TRANSFORMER (Code: )

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM. Course Title: D C MACHINES AND TRANSFORMER (Code: ) GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: D C MACHINES AND TRANSFORMER (Code: 3330902) Diploma Programme in which this course is offered Electrical Engineering

More information

Government of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru

Government of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru Government of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru Course Title: POWER ELECTRONICS Course Code : 15EE51T Semester : V Course Group : Core Teaching Scheme

More information

UNIVERSITY STUDY PROGRAMME: PROMET. Syllabus. Academic Year 2018/2019. Lectures (L): 30 hours

UNIVERSITY STUDY PROGRAMME: PROMET. Syllabus. Academic Year 2018/2019. Lectures (L): 30 hours UNIVRSITY STUDY PROGRAMM: PROMT Syllabus Academic Year 018/019 Title of the Course: Railway Traffic Technology The course is conducted in nglish. Co-ordinator: prof.dr.sc. Associate teachers: asst. prof.,

More information

FACULTY OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF EEE COURSE PLAN FOR B.TECH (EEE)

FACULTY OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF EEE COURSE PLAN FOR B.TECH (EEE) FULTY OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF EEE COURSE PLAN FOR B.TECH (EEE) Course Code : EE0460 Course Title : Flexible Systems Semester : VIII Course Time : DEC 20-to May 204 Location : S.R.M.E.C

More information

Second Edition. Power Electronics. Devices and Circuits. V. Jagannathan

Second Edition. Power Electronics. Devices and Circuits. V. Jagannathan Second Edition Power Electronics Devices and Circuits V. Jagannathan Power Electronics Devices and Circuits SECOND EDITION V. Jagannathan Professor and Head Department of Electrical and Electronics Engineering

More information

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. D C MACHINES AND TRANSFORMERS (Code: ) Electrical Engineering

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. D C MACHINES AND TRANSFORMERS (Code: ) Electrical Engineering GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum D C MACHINES AND TRANSFORMERS (Code: 3330902) Diploma Programme in which this course is offered Semester in which offered Electrical

More information

Government of Karnataka. Directorate Of Technical Education. Board of Technical Examinations, Bangalore

Government of Karnataka. Directorate Of Technical Education. Board of Technical Examinations, Bangalore Government of Karnataka Department of Technical Education Board of Technical Examinations, Bangalore Prerequisites: Knowledge of Science, Work shop technology, Thermal engineering, Mechanics of Machines,

More information

COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine

COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine INSTRUCTOR: Xingcai Lu, Xinqi Credits: 3 Qiao REQUIRED COURSE OR ELECTIVE COURSE: Required COURSE STRUCTURE/SCHEDULE: 1.

More information

Comparison of Indian Electricity Rules, 1956 Vs CEA (Measures relating to Safety and Electric Supply) Regulations, 2010

Comparison of Indian Electricity Rules, 1956 Vs CEA (Measures relating to Safety and Electric Supply) Regulations, 2010 1 of 5. Comparison of Indian Electricity Rules, 1956 Vs CEA (Measures relating to Safety and Electric Supply) Regulations, 2010 2 Definitions 2 Not seen the definition for Inspector. But with, - Qualifications,

More information

Electrical Controls. Syllabus

Electrical Controls. Syllabus Instructor: Jeremie Hedges (757)651-1007 Contact Hours: 72 hours Prerequisites: None Electrical Controls Syllabus Course Description: This course is designed to present a blend of electrical theory and

More information

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI -603104 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK VII SEMESTER EE6501-Power system Analysis

More information

Semester master's program «Railway electro supply in Russia»

Semester master's program «Railway electro supply in Russia» Semester master's program «Railway electro supply in Russia» Semester program Railway electro supply in Russia is prepared by the chair "Power of railway transport" of Omsk State Transport University.

More information

JEFFERSON COLLEGE COURSE SYLLABUS HRA101 ELECTRICITY FOR HVAC. 5 Credit Hours. Prepared by: William Kaune. Revised Date: March 17, 2014

JEFFERSON COLLEGE COURSE SYLLABUS HRA101 ELECTRICITY FOR HVAC. 5 Credit Hours. Prepared by: William Kaune. Revised Date: March 17, 2014 JEFFERSON COLLEGE COURSE SYLLABUS HRA101 ELECTRICITY FOR HVAC 5 Credit Hours Prepared by: William Kaune Revised Date: March 17, 2014 Dena McCaffrey, Ed.D., Dean, Career & Technical Education HRA101 Electricity

More information

Course Outcome Summary

Course Outcome Summary Course Information Division: ASET Contact Hours: 90 Theory: 30 Lab Hours: 60 Total Credits 4 Prerequisites ELEC 125 (Fundamentals of Electricity) Course Description This course is designed to provide students

More information

COURSE NUMBER & COURSE TITLE: ME 300 Fluid Power Transmission & Control

COURSE NUMBER & COURSE TITLE: ME 300 Fluid Power Transmission & Control COURSE NUMBER & COURSE TITLE: ME 300 Fluid Power Transmission & Control INSTRUCTOR:, Credits: 3 Tao jianfeng REQUIRED COURSE OR ELECTIVE COURSE: Elective Language of instruction: Chinese TERMS OFFERED:

More information

Implementation of Steady-State Power System Visualizations Using PowerWorld Simulator. Dr. Jung-Uk Lim, Department of Electrical Engineering

Implementation of Steady-State Power System Visualizations Using PowerWorld Simulator. Dr. Jung-Uk Lim, Department of Electrical Engineering A. Title Page Implementation of Steady-State Power System Visualizations Using PowerWorld Simulator Dr. Jung-Uk Lim, Department of Electrical Engineering B. Statement of problem researched or creative

More information

Engineering Diploma Resource Guide ST280 ETP Hydraulics (Engineering)

Engineering Diploma Resource Guide ST280 ETP Hydraulics (Engineering) Engineering Diploma Resource Guide ST80 ETP Hydraulics (Engineering) Introduction Hydraulic systems are a fundamental aspect of engineering. Utilised across a variety of sectors including aviation, construction,

More information

Advanced Protective Relay Training

Advanced Protective Relay Training Advanced Protective Relay Training Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq A properly designed protection

More information

CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS:

CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS: I. INTRODUCTION CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS: A. Electricity is a vital part of modern aviation technology. This course lays the

More information

Power and machines Program

Power and machines Program Bachelor Degree Power and machines Program Dept. of Electrical Engineering Course specification Electrical Testing (A-B) اختبارات كهربية )أ- ب( EP324 1. Course Aim Main Aim To apply the theory of electrical

More information

MILLWRIGHT. Learner Program Content:

MILLWRIGHT. Learner Program Content: MILLWRIGHT Course Duration On average 45 Months - 18 Months institutional training - 24 Months on-the-job - 03 Months trade test preparation and Trade test Learner Program Content: BASIC PHASE ADVANCED

More information

Automotive. Automotive Body and Repair

Automotive. Automotive Body and Repair Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could

More information

Required Textbook and Materials 1. Texas Commercial Vehicle Drivers Handbook 2. Handout literature

Required Textbook and Materials 1. Texas Commercial Vehicle Drivers Handbook 2. Handout literature Commercial Drivers License (CVOP 1201) Credit: 2 semester credit hours (1 hour lecture, 4 hours lab) Co-requisite: LNWK 1311 Course Description Overview of the State of Texas Class A Commercial Drivers

More information

IAE-101: Electrical Fundamentals for Non-Electrical Personnel

IAE-101: Electrical Fundamentals for Non-Electrical Personnel IAE-101: Electrical Fundamentals for Non-Electrical Personnel Abstract Today s world of rapidly evolving technology poses a wealth of challenges just to remain competitive in the marketplace. Everyone

More information

Final Written Examination.

Final Written Examination. Benha University Semester (3 th year Power &Control) Faculty of Engineering Electrical Power Systems (E1331) Electrical Engineering Department Semester 2015-2016 Final Written Examination. 10/1/2016 Time

More information

Electrical Machines. Unit level 4 Credit value 15. Introduction. Learning Outcomes

Electrical Machines. Unit level 4 Credit value 15. Introduction. Learning Outcomes Unit 21: Unit code Electrical Machines A/615/1495 Unit level 4 Credit value 15 Introduction Electrical machines can be found in manufacturing, transport, consumer appliances and hospitals. People will

More information

Politics Philosophy Economics Undergraduate Degree Plan Curriculum Map New Plan Proposal: Appendix C

Politics Philosophy Economics Undergraduate Degree Plan Curriculum Map New Plan Proposal: Appendix C Politics Philosophy Economics Undergraduate Degree Plan Curriculum Map 2016 New Plan Proposal: Appendix C Politics Sub-Plan Learning Outcomes Philosophy Sub-Plan Economics Sub-Plan Politics Sub-Plan (POPE)

More information

Design and Modeling of Fluid Power Systems ME 597/ABE 591

Design and Modeling of Fluid Power Systems ME 597/ABE 591 Systems ME 597/ABE 591 Dr. Monika Ivantysynova MAHA Professor Flud Power Systems MAHA Fluid Power Research Center Purdue University Systems Dr. Monika Ivantysynova, Maha Professor Fluid Power Systems Mivantys@purdue.edu

More information

CAGUAS, PUERTO RICO COURSE SYLLABUS. 1. COURSE TITLE : Principles of Pneumatics and Hydraulics Laboratory

CAGUAS, PUERTO RICO COURSE SYLLABUS. 1. COURSE TITLE : Principles of Pneumatics and Hydraulics Laboratory CAGUAS, PUERTO RICO COURSE SYLLABUS 1. COURSE TITLE : Principles of Pneumatics and Hydraulics Laboratory 2. COURSE CODE : ELE 2308L 3. CREDIT : One (1)/ (2 hours weekly) 4. DURATION : One semester 5. PRE-REQUISITE

More information

AUTO 140A: VEHICLE MAINTENANCE

AUTO 140A: VEHICLE MAINTENANCE AUTO 140A: Vehicle Maintenance 1 AUTO 140A: VEHICLE MAINTENANCE Discipline AUTO - Automotive Technology Course Number 140A Course Title Vehicle Maintenance Catalog Course Description Intended for the incumbent

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Demonstrate and apply knowledge of theory and practice for registration of electrical workers (stage 3) Level 4 Credits 3 Purpose This unit standard is for people who are completing an

More information

Details of Faculty member Room no

Details of Faculty member Room no Faculty of Engineering & Technology, SRM University, Kattankulathur 603203 School of Mechanical Engineering Department of Automobile Engineering Course plan Course code : AE0403 Date : 01 July 2011 Course

More information

EJ2410 HYBRID VEHICLE DRIVES

EJ2410 HYBRID VEHICLE DRIVES COURSE DESCRIPTION EJ2410 HYBRID VEHICLE DRIVES Period 2, autumn 2014, 7,5 hp There is an increasing demand today to produce environment friendly vehicles with high performance. This can to a large extent

More information

Focus Area Level Report Including Knowledge and Skills, and Performance Indicators

Focus Area Level Report Including Knowledge and Skills, and Performance Indicators Including Knowledge and Skills, and PST 01. Use physical science principles and engineering applications with power, structural and technical systems to solve problems and improve performance. PST 01.01.

More information

Demonstrate knowledge of electrical theory for Electrical Service Technician B

Demonstrate knowledge of electrical theory for Electrical Service Technician B Demonstrate knowledge of electrical theory for Electrical Service Technician B 10937 version 4 Page 1 of 5 Level 3 Credits 3 Purpose 'Electrical Service Technician B' (EST B) refers to a class of electrical

More information

LONG BEACH CITY COLLEGE AUTO MECHANICS 233 AUTOMOTIVE ELECTRICAL & FUEL SYSTEMS SPRING 2005

LONG BEACH CITY COLLEGE AUTO MECHANICS 233 AUTOMOTIVE ELECTRICAL & FUEL SYSTEMS SPRING 2005 LONG BEACH CITY COLLEGE AUTO MECHANICS 233 AUTOMOTIVE ELECTRICAL & FUEL SYSTEMS SPRING 2005 SUBJECT MATTER AREA Automotive Technology COURSE NUMBER AMECH 233 SECTION NUMBER 31377 ROOM # MM128A/MM130 COURSE

More information

ELECTRIC DRIVES N.K. DE P.K. SEN

ELECTRIC DRIVES N.K. DE P.K. SEN ELECTRIC DRIVES N.K. DE P.K. SEN Electric Drives NISIT K. DE Associate Professor Department of Electrical Engineering Indian Institute of Technology Kharagpur and PRASANTA K. SEN Assistant Professor Department

More information

Metropolitan Community College COURSE OUTLINE FORM

Metropolitan Community College COURSE OUTLINE FORM COURSE TITLE: ENGINE MECHANICAL SERVICE COURSE PREFIX AND NO. AUTT 1710 LEC 3.0 LAB 9.0 CREDIT HOURS 6.0 COURSE DESCRIPTION: This course covers the diagnosis and repair of upper engine components. The

More information

Question Bank. Write the relationship between speed and frequency for 3 phase induction 3 motor.

Question Bank. Write the relationship between speed and frequency for 3 phase induction 3 motor. Course B.E(EEE-Marine) Batch 17 Semester VII Subject code EE1706 subject Name Marine Electrical System Design & Layout PART-A Marks: 2 UNIT-1 Question Bank 1 Write the comparison of A.C. over D.C.? 2 Why

More information

Automotive & Diesel Technology

Automotive & Diesel Technology AUTO 133 Automotive Suspension/Steering (3.5 credit, 2 lecture, 3 lab) Instruction in skills needed to diagnose, service, and repair modern automotive suspension/steering systems. Suspension/steering designs,

More information

EJ2440 ELECTRIC TRANSPORTATION

EJ2440 ELECTRIC TRANSPORTATION COURSE DESCRIPTION EJ2440 ELECTRIC TRANSPORTATION Period 4, spring 2017, 6 hp Transportation of people and gods is fundamental for a modern society. Apart from trains, almost all transportation is driven

More information

Total duration of course = 3 Months (12 weeks) Total training hours = 400 hrs.

Total duration of course = 3 Months (12 weeks) Total training hours = 400 hrs. 1 TRAINING OBJECTIVES: In order to reduce the unemployment and poverty in the society, the curriculum is designed to impart the technical knowledge and skill to those who are literate and.can not do the

More information

Industrial Maintenance Technology Student Learning Outcomes

Industrial Maintenance Technology Student Learning Outcomes Industrial Maintenance Technology Student Learning Outcomes February, 2017 ~ f ) FDTC Curriculum Map Program: Industrial Maintenance Technology Course# Course Title Credits Hours Lecture Lab Program Outcomes

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ON COURSE OUTLINE

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ON COURSE OUTLINE SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ON COURSE OUTLINE COURSE TITLE: ELECTRICAL, ELECTRONICS & FUELS : SEMESTER: 32 Week Program PROGRAM: MOTOR VEHICLE MECHANIC PRE-APPRENTICE

More information

Applications of Pneumatics and Hydraulics

Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 Aim This unit aims to extend learners understanding of pneumatic and hydraulic fluid power systems

More information

EE069: Electrical Engineering for Non-Electrical Engineers

EE069: Electrical Engineering for Non-Electrical Engineers EE069: Electrical Engineering for Non-Electrical Engineers EE069 Rev.002 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This course introduces the Basic Principles of Electricity in a simple, easy

More information

Higher National Unit Specification. General information for centres. Electrical Motor Drive Systems. Unit code: DN4K 35

Higher National Unit Specification. General information for centres. Electrical Motor Drive Systems. Unit code: DN4K 35 Higher National Unit Specification General information for centres Unit code: DN4K 35 Unit purpose: This Unit has been designed to allow candidates to develop a knowledge and understanding of electrical

More information

Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( )

Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( ) Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 (2382-18) March 2018 Version 1.0 FAQs 1 18 th Edition IET Wiring Regulations 2018 FAQs When will the 18 th Edition of BS 7671

More information

Lecture PowerPoints. Chapter 21 Physics: Principles with Applications, 7th edition, Global Edition Giancoli

Lecture PowerPoints. Chapter 21 Physics: Principles with Applications, 7th edition, Global Edition Giancoli Lecture PowerPoints Chapter 21 Physics: Principles with Applications, 7th edition, Global Edition Giancoli This work is provided solely for the use of instructors in teaching their courses and assessing

More information

S. K. Industrial Corporation

S. K. Industrial Corporation +91-8048763042 S. K. Industrial Corporation https://www.indiamart.com/skindlcorpn/ We are an ISO 9001 : 2008 certified company. We are manufacturing, exporting and supplying HT and LT transmission line,

More information

Course Syllabus

Course Syllabus John D. Rockefeller Truck Driver Training Program Course Syllabus 2013-14 INSTRUCTOR: John Barber, Tim Egyud CLASSROOM: JDRCC DOOR 6 OFFICE HRS: 7:00-2:00 M-F OFFICE PH: 304-564-3337 extension 118 MOBILE

More information

Basic Connection Services Application and Price Guide

Basic Connection Services Application and Price Guide Basic Connection Services Application and Price Guide 2016-17 Disclaimer TasNetworks (which, for the purposes of this disclaimer, includes all of its related bodies corporate, its officers, employees,

More information

Cluster Knowledge and Skills for Business, Management and Administration Finance Marketing, Sales and Service Aligned with American Careers Business

Cluster Knowledge and Skills for Business, Management and Administration Finance Marketing, Sales and Service Aligned with American Careers Business for Business, Management and Administration Finance Marketing, Sales and Service Aligned with American Careers Business About American Careers Correlations The following correlations are provided to demonstrate

More information

: HOUSE WIRING. Attendance : 90% attendance is must to appear for the examination COURSE THEORY PRACTICAL TOTAL HOUSE WIRING

: HOUSE WIRING. Attendance : 90% attendance is must to appear for the examination COURSE THEORY PRACTICAL TOTAL HOUSE WIRING HOUSE WIRING COURSE Duration Eligibility : HOUSE WIRING : 3 Months. : Minimum 7 th class pass and able to read and write at least in Telugu Age : Above 14 Years Attendance : 90% attendance is must to appear

More information

TRANSPORTATION TECHNOLOGY 10

TRANSPORTATION TECHNOLOGY 10 TRANSPORTATION TECHNOLOGY 10 Description In Transportation Technology 10, students will gain knowledge of safety, use of tools, and the repair and maintenance of small gas engines. Other elements of the

More information

Single-Phase Underground Operating

Single-Phase Underground Operating Single-Phase Underground Operating S T U D E N T M A N U A L March 31, 2005 2 STUDENT TRAINING MANUAL Prerequisites: Introduction to Underground Systems module Objectives: Given an underground distribution

More information

SRM UNIVERSITY FACULTY OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF FOOD PROCESS ENGINEERING COURSE PLAN

SRM UNIVERSITY FACULTY OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF FOOD PROCESS ENGINEERING COURSE PLAN SRM UNIVERSITY FACULTY OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF FOOD PROCESS ENGINEERING COURSE PLAN Course code FP 0451 Class Time Table Course name Boiler And Steam Engineering Sem Category Course

More information

Electrical and Telecommunications Engineering Technology_EET2251/ET452. Electrical and Telecommunications Engineering Technology

Electrical and Telecommunications Engineering Technology_EET2251/ET452. Electrical and Telecommunications Engineering Technology YORK CITY COLLEGE OF TECHNOLOGY The City University of New York DEPARTMENT: SUBJECT CODE AND TITLE: Electrical and Telecommunications Engineering Technology EET2251/ET452 Electric Machines Laboratory COURSE

More information

Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications

Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications Workshop on Design and Implementation of Power Converters with EMC/EMI Modelling for Micro Grid & Electric Vehicle Applications 18 th - 21 st July 2018 By- Power Electronics Lab (EE Department) Indian

More information

Electricity Course. Part B Course Outline

Electricity Course. Part B Course Outline Electricity Course Rev. Date: 10/01/2002 By: R. Crompton Part B Course Outline Subject Area 0 Orientation 2.6 0.0 0.1 To the School 1.0 0.2 To the Course 1.0 0.3 To the 0.3 0.3 0.4 To Possible Emergencies

More information

ELG4125 Themes of Course Projects

ELG4125 Themes of Course Projects ELG4125 Themes of Course Projects Theme 1: Power System Modelling Theme 2: Power System Analysis Theme 3: Forecasting in Power Systems Theme 4: Distribution System. Theme 1: Power System Modelling In addressing

More information

B.E-EEE(Marine) Batch 7. Subject Code EE1704 Subject Name Special Electrical Machines

B.E-EEE(Marine) Batch 7. Subject Code EE1704 Subject Name Special Electrical Machines Course B.E-EEE(Marine) Batch 7 Semester VII Subject Code EE1704 Subject Name Special Electrical Machines Part-A Unit-1 1 List the applications of synchronous reluctance motors. 2 Draw the voltage and torque

More information

Electrical Equipment and Safety: Operation, Control, Maintenance and Troubleshooting

Electrical Equipment and Safety: Operation, Control, Maintenance and Troubleshooting Electrical Equipment and Safety: Operation, Control, Maintenance and Troubleshooting Page 1 of 6 Why Attend This course covers the theoretical and practical operation of common electrical equipment and

More information

Propulsion and Auxiliary Systems

Propulsion and Auxiliary Systems Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2018 280 - FNB - Barcelona School of Nautical Studies 742 - CEN - Department of Nautical Sciences and Engineering MASTER'S DEGREE

More information

ELECTRICAL EQUIPMENT : TRANSFORMERS, INVERTERS, RECTIFIERS, UNINTERRUPTABLE POWER SYSTEMS, GENERATORS. UAE, Sharjah, Copthorne Hotel Sharjah

ELECTRICAL EQUIPMENT : TRANSFORMERS, INVERTERS, RECTIFIERS, UNINTERRUPTABLE POWER SYSTEMS, GENERATORS. UAE, Sharjah, Copthorne Hotel Sharjah Training Course : ELECTRICAL EQUIPMENT : TRANSFORMERS, INVERTERS, RECTIFIERS, UNINTERRUPTABLE POWER SYSTEMS, GENERATORS Training Course For One Week In UAE, Sharjah, Copthorne Hotel Sharjah Which Be Held

More information

Updating the International Standard Classification of Occupations (ISCO) Draft ISCO-08 Group Definitions: Occupations in Electrical

Updating the International Standard Classification of Occupations (ISCO) Draft ISCO-08 Group Definitions: Occupations in Electrical International Labour Organization Organisation internationale du Travail Organización Internacional del Trabajo Updating the International Standard Classification of Occupations (ISCO) Draft ISCO-08 Group

More information

Electrical Power Systems 2014/15

Electrical Power Systems 2014/15 www.hft-education.com 2014/15 Electrical Power Engineering is fundamental to maintaining and protecting global electricity supply and preventing catastrophic power failures. With the current investment

More information

Alternating Current and Three-Phase Systems Annotated Instructor s Guide

Alternating Current and Three-Phase Systems Annotated Instructor s Guide Alternating Current and Three-Phase Systems Annotated Instructor s Guide Module 80201-11 Module Overview This module provides an introduction to the theory of alternating current, along with AC circuits,

More information