Code: KOHLER KDW 1404 ZANARDI ATO 28-1VS/4. VOLTAGE HZ PHASE COS Ø PRP kva/kw LTP kva/kw AMP. (LTP) 400/ ,8 10,0/8,0 11,0/8,8 15,9

Transcription

1 Automatic without ats panel Standby Genset V3. Image for guidance purposes. PRP CONTINUOUS POWER: LTP 10 kva STANDBY POWER: 11 kva PRP Prime Power norma ISO LTP Limited Time Power norma ISO ENGINE ALTERNATOR MAKE MODEL MAKE MODEL KOHLER KDW 1404 ZANARDI ATO 281VS/4 VOLTAGE HZ PHASE COS Ø PRP kva/kw LTP kva/kw AMP. (LTP) 400/ ,8 10,0/8,0 11,0/8,8 15,9

2 ENGINE CHARACTERISTICS MAKE MODEL KOHLER KDW 1404 General Data Power PRP (kwm) Power LTP (kwm) No. cylinders Cylinder capacity (L) Diameter per stroke (mm) Compression ratio Cooling system Injection Suction Series regulator Fly wheel coupling x 77, LIQUID INDIRECT NATURAL MECHANICAL 5 6,5" Lubrication system Oil capacity (L) Oil consumption (%) Min. alarm oil pressure (bar) Ventilation system Air cooling flow (m 3 /h) Combustion air flow (m 3 /h) Max. back pressure for fan (mbar) Exhaust system Exhaust gas flow (m 3 /h) Exhaust back pressure (mbar) Temp. exhaust gases (ºC) Electrical system VDC (V) Battery (Ah) Engine startup (kw) 12 60

3 ALTERNATOR CHARACTERISTICS MAKE ZANARDI MODEL ATO 281VS/4 General Data Power PRP (kva) Power LTP (kva) Efficiency Alt. 3/4 % Efficiency Alt. 4/4 % No. Poles Voltage regulator No. wires Insulation Xd (%) X d (%) X Degree of protection COMPOUND TRANS 6 H IP23 GENERATOR SET CONSUMPTION % POWER USED LITRES/HOUR 50% 75% 100% DIMENSIONS, CAPACITIES, APPROXIMATE WEIGHT Dimensions (mm) LENGTH WIDTH HEIGHT FUEL TANK (LITRES) WEIGHT (KG) NOISE LEVEL (db (A))

4 GENERAL DESCRIPTION INMESOL GENERATOR SET The INMESOL generator set is an electrical energy generating machine which is used in places where there is no mains supply or when there is a MAINS failure. The mobile elements, distribution belt, fan, etc., and those parts which reach high temperatures during operation, exhaust manifold, etc, include their corresponding protections, in compliance with the requirements of the Machinery Directive 2006/42. Inmesol, S.L. company with ISO 9001 quality management system certificate and ISO Environmental Management System Certificate for the: Design, manufacture, marketing and technical assistance of power GENSETS, lighting towers, welding GENSETS, tractor with PTO GENSET and hybrid generation systems. Europe regulations: Inmesol power GENSET sets comply with European legislation and were given the CE marking which includes the following directives: 2006/42/EC on machinery safety. 2005/88/EC on NOISE EMISSIONS by equipment for outdoor use (amends the 2000/14/EC). 2014/30/UE on Electromagnetic Compatibility. 2014/35/UE on electrical safety, electrical equipment designed to be used within certain voltage limits 2002/88/EC and 2004/26/EC amending the 97/68 on the emission of gases and pollutant particles from internal combustion engines that are installed in nonroad mobile machinery. International regulations: It also complies with International Legislation and Regulations: Technical Regulation on Safety of Machinery & Equipment No. 753, repealing GOST R standards for exports to Russia. Resolution nº dated August 30th 2013 Reglamento Técnico de Instalaciones Eléctricas RETIE issued by the Ministry of Mining and Energy, Section Engines and power generators, for exports to Colombia. Information: The power ratings are for reference to environmental conditions: barometric pressure 100 kpa, 25 C and 30% relative humidity. These are defined by ISO 8528 and ISO PrimePower (PRP) Main Service is applicable for power GENSETs that function as main electric power source. It may be overloaded by 10% in limited time points, maximum once every 12 hours. StandbyPower (LTP) Emergency Service applies to power GENSETs that run during Electrical Grid failure. This power may NOT BE OVERLOADED. Nevertheless, to obtain long engine life, it is recommended that the active power average load (kw) connected to the power GENSET set in any period of 24 hours of operation does not exceed the following values: In Main Service 70% of the PRP power. In Emergency Service during Electrical Grid failure 80% of the LTP power.

5 SB STANDBY RANGE Scope of supply GENSET WITH AMF CONTROL PANEL WHITOUT TRANSFER SWITCH. READY TO ADD SEPARATED LTS PANEL. Engine/alternator monobloc directly conected and installed via silent blocks on a frame made from high tensile electro welded steel profiles that are treated with degreasing liquids and aplicated with a phosphate coat and Polyester (QUALICOAT) paint. Fuel tank integrated in the chassis provided with fuel level jauge and fuel lines to the engine. Engine with mechanical engine driven pusher fan. Industrial silencer with 15 db(a) noise reduction and exhaust outlet tube. Termal and magnetic circuit breaker Battery charge alternator. Starter battery complete with cables to the engine and pole protection. Installation prepared for earthing spike (spike not included). Security protection for blets and moving parts as well as on electrical component. External emergency stop push button. Self excited and auto regulated alternator. 4 Lifting points for gen sets from 450 kva and bigger. Base frame preparated for trailer kit Standard electronic speed governor on engines from 220 kva and up. Electric control cubicle with digital control module, automatic mains failure, manual start or remote start on signal. Battery charger for gen set with 12VCC battery (2A). Battery charger for gen set with 24VCC battery (5A). Electric engine coolant preheating on gen sets with automatic mains failure controller. Control cable of 6 m OPTIONS Eearth fault relay LTS Panel in metal cabinet Residential silencer

6 DSE 6020 MKII AUTOMATIC CONTROL PANEL WITHOUT ATS PANEL PROTECTION, DISTRIBUTION AND AUTOMATIC CONTROL panel which starts the generator set when it detects a mains failure and stops it when the mains is restored with the control unit DSE 6020 MKII. It also starts and stops the group manually via a pushbutton or remote startup by contact. Image for guidance purposes. It has the following: 1. EMERGENCY STOP PUSHBUTTON 2. PROTECTIONS: Magnetothermal switch (preheating resist.) 2P (16 A) Protection fuses for control module 3. BATTERY CHARGER PREWIRED GENSET READY TO INSTALL AMF CONTROL PANEL. GENSET WITH AMF CONTROL PANEL WITH TRANSFER SWITCH. GENSET WITH AMF CONTROL PANEL WHITOUT TRANSFER SWITCH. READY TO ADD SEPARATED LTS PANEL.

7 DSE 6020 MKII AUTOMATIC CONTROL PANEL WITHOUT ATS PANEL 4. DSE 6020 MKII PROTECTION CONTROL MODULE. LCD SCREEN: It has a digital LCD screen, which provides easy reading of the information regarding the ENGINE, ALTERNATOR, MAINS and CHARGING. ENGINE: ALTERNATOR AND CHARGE: MAINS: Coolant temperature Oil pressure Turning speed (rpm) Voltages between phases and between phases and neutral. Intensities Frequency Frequency Voltages between phases and neutral (L1N, L2N, L3N). Voltages between phases and (L1L2, L2L3, L1L3). Fuel level Active Power (kw) Active Power (kw) Battery voltage Reactive Power (kvar) Reactive Power (kvar) Battery alternator voltage. Apparent Power (kva) Apparent Power (kva) Operating hours Cos phi Cos phi Number of startups Active energy meter (kwh) CONTROL OF THE SET: STARTS and STOPS the set AUTOMATICALLY when mains failure is detected and when it is restored, respectively. It can also operate MANUALLY a REMOTE STAR. Breaker control via fascia buttons. PROTECTION OF THE ENGINE AND ALTERNATOR, WITH THE ALARMS ACTIVATED: ENGINE: ALTERNATOR: MAINS: Low oil pressure Low and High Voltage Low and High Voltage High coolant temperature Low and High Frequency Low and High Frequency Low and High battery Voltage. Failure of the alternator to charge batteries Overload due to Intensity (A) Power Overload (KW) Low fuel level Engine maintenance alarms for fuel filter, air filter and oil filter OTHER CHARACTERISTICS: The realtime clock provides an exact record of events. Extensive number of configurable inputs and outputs. Configurable alarms and timers. USB connectivity Fully configurable via software and PC. Communication via USB cable for remote control Programmable clock with multiple maintenance events which can be configured for optimal motor functioning. Weekly and/or monthly programming for up to 8 startups and shutdowns per week. ALTERNATIVE CONFIGURATIONS, which open up the working possibilities PREWIRED GENSET READY TO INSTALL AMF CONTROL PANEL. GENSET WITH AMF CONTROL PANEL WITH TRANSFER SWITCH. GENSET WITH AMF CONTROL PANEL WHITOUT TRANSFER SWITCH. READY TO ADD SEPARATED LTS PANEL.

8 DSE 6020 MKII AUTOMATIC CONTROL PANEL WITHOUT ATS PANEL 5. PROTECTIONS MAGNETO. PROTECTION (A) EARTH LEAK PROTECTION DISTRIBUTION 16A, 4P OPCIONAL Direct from circuit breaker OPTION: 4Pole Switchboard in metal cabinet independent from the Automatic Panel PREWIRED GENSET READY TO INSTALL AMF CONTROL PANEL. GENSET WITH AMF CONTROL PANEL WITH TRANSFER SWITCH. GENSET WITH AMF CONTROL PANEL WHITOUT TRANSFER SWITCH. READY TO ADD SEPARATED LTS PANEL.