Power Meter INSTRUCTION MANUAL. Model Number: AESPP AUS

Transcription

1 Power Meter Model Number: AESPP-0718 INSTRUCTION MANUAL

2 1

3 Welcome Congratulations on choosing to buy a Bauhn product. All products brought to you by Bauhn are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come. 2

4 Contents Welcome 2 Warranty Notice 4 General Safety Instructions 5 Function Overview 7 Product Overview 9 Product Operation 11 Troubleshooting 15 Specifications 16 Repair and Refurbished Goods or Parts Notice 17 3

5 Power Meter Warranty Details REGISTER YOUR PURCHASE AT TO KEEP UPDATED WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. AUS

6 General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference. These safety precautions reduce the risk of fire, electric shock and injury when correctly adhered to. This product complies with Australian Safety standard AS/NZS 3122 to ensure the safety of the product. The RCM is a visible indication of a product s compliance with all applicable ACMA regulatory arrangements, including all technical and record-keeping requirements. Do not attempt to open the product housing. There are no userserviceable parts inside this product. Do not expose this product to water, rain, moisture or dust. Electronic products of this kind should never be subjected to moisture or extreme temperatures. Do not repair the unit yourself. If your device is not functioning correctly, disconnect the product from power, and contact after sales support. Supervise young children to ensure they do not play with the product. Do not expose to water, dust, moisture, chemicals, oils, or other liquids. Do not expose to naked flames or other heat sources. Do not drop or subject the device to undue shock. Keep device away from magnets at all times. Keep away from direct sunlight. Indoor use only. Unplug this device during lightning storms or when unused for long periods of time. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Do not exceed the maximum power load (2400W). 5

7 General Safety Instructions Batteries Do not use any other battery than specified. Do not use old and new batteries together. Danger of explosion if battery is incorrectly replaced. Dispose of batteries promptly and properly follow any guidelines for recycling and disposal of batteries that apply in your local area. Keep batteries away from children and pets. Never throw batteries into fire or expose them to extreme heat. Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short-circuit, leak or explode. Do not attempt to disassemble battery. WARNING! Keep batteries out of reach of children. Swallowing may lead to serious injury or death in as little as 2 hours due to internal burns. If swallowed, go straight to a hospital emergency room. Dispose of used batteries immediately. Responsible disposal of the packaging The packaging of your product has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please ensure they are offered for recycling rather than throwing these materials away. Responsible disposal of the product At the end of its working life, do not throw this product out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Contact your local authority for your nearest recycling centre. Electrical and electronic items contain materials and substances which, if handled incorrectly, could potentially be hazardous to the environment and human health. 6

8 Function Overview

9 Function Overview (Cont.) 1. Set: choose which data reading to display (select from six modes) 2. Energy: toggles between the following display settings: voltage, current, frequency, power factor, overload power, present power 3. Timer: displays the time lapsed in hours, minutes and seconds 4. Energy data display: shows energy usage 5. Cost display: calculates the cost of the energy being consumed by the connected appliance 6. Reset: in the case of abnormal operation, use the tip of a pen to push this button and reset the device 7. Up: use to enter your electricity price and to set your overload limit 8. Cost: enter the price of electricity per KWh 9. Power socket: connect an appliance by plugging it in here 8

10 Product Overview The BAUHN Power Meter can measure the power consumption of electric appliances and carbon emissions, as well as calculate the cost of the electricity being used. It will help you to track your electricity consumption and potentially reduce your power bill and carbon emissions. 9

11 Product Overview (Cont.) Reading the Display 1. The Timer on the top of the LCD screen displays the total time the appliance has been measured using the Power Meter. It will begin in minutes and seconds. After one hour has elapsed the display will change to hours and minutes. After 24 hours the timer will reset to zero. 2. The middle section of the LCD displays the current electrical parameter. Press the ENERGY button to switch between monitoring voltages, current, frequency, power factor, overload power and present power. 3. The bottom section of the LCD screen displays the cost and accumulated usage statistics. Press the COST button to change between accumulated energy cost, electric power usage, cost per kwh, the total number of days monitored and the CO2 volume in kg. 10

12 Product Operation Connecting Appliances 1. Remove the plastic pull tab from the battery compartment at the rear of the product to access the internal batteries. 2. Plug the Power Meter into the mains socket. 3. Plug the appliance you wish to monitor into the exposed socket of the power meter. 4. Switch the mains socket power switch to ON. 5. Use the connected appliance as normal - the Power Meter will now monitor the energy used by the appliance. TIP: The internal batteries will allow you to set the Power Meter functions before plugging into the mains power. Setting the Electricity Price 1. Press COST button for three seconds to enter electricity price setting mode. When COST/KWh on the LCD is displayed, use the UP button to set the rate. Use the SET button to navigate between the digits. When you have finished setting the rate, press the COST button to save your settings. 2. The default value for electricity price field displays as 1.00 COST/KWh. 11

13 Product Operation (Cont.) 3. If no button is pressed within ten seconds, the device will automatically exit the electricity price setting mode. Setting the Overload Limit 1. Press ENERGY for three seconds to enter the Overload Mode. When OVERLOAD on the LCD is displayed, use the UP button to enter the value. Use the SET button to move decimal place. When you have finished setting the chosen overload limit, press the ENERGY button to save your setting. 2. The default overload value is 3680W. When the set overload limit is exceeded, OVERLOAD will flash on the LCD screen. Resetting the Power Meter If an abnormal display appears and/or the buttons become unresponsive, the device can be reset. To do this, press the small red RESET button using the tip of a pen/pencil. 12

14 Product Operation (Cont.) Display Modes You can personalise the type of data that is displayed on the Power Meter screen. There are six different combinations of data display to choose from: Mode 1 Top: accumulative time Middle: present voltage (range: 0.000~9999V) Bottom: accumulative electricity (range: 0.000~9999kWh) Mode 2 Top: accumulative time Middle: present current (range: 0.000~9999A) Bottom: electricity price Mode 3 Top: accumulative time Middle: present frequency (range: 0.000~9999Hz) Bottom: accumulated days (range: 0.000~9999 days) 13

15 Product Operation (Cont.) Mode 4 Top: accumulative time Middle: present power factor (range: 0.000~1.00 power factor) Bottom: Volume of CO2 (range: 0.000~9999kgs. Note: 1kWh of electricity will emit 0.998kg CO2) Mode 5 Top: accumulative time Middle: Overload wattage (range: 0.000~9999W. Note: default is 3680W) Bottom: blank Mode 6 Top: accumulative time Middle: present power (range: 0.000~9999W) Bottom: accumulative electric cost (range: 0.000~9999 cost) 14

16 Troubleshooting Problem Power Meter isn t turning on Power Meter isn t showing the right information Power Meter isn t counting the energy usage Power Meter isn t displaying any information How can I find out the cost of my electricity in KWh? Solution The battery in the Power Meter may be flat. Replace the batteries by using a screwdriver to open the battery compartment at the rear of the product. Replace the batteries using 2 x LR44 batteries, observing the correct polarity. Try resetting the Power Meter to its default setting (see page 9 regarding the RESET button). Re-program your settings. The Power Meter will not start counting energy usage unless the attached device is using more than 2W of energy. Make sure your power outlet is switched on. Check your most recent power bill or contact your electricity provider. 15

17 Specifications Technical Specifications Technical parameters Working conditions Voltage: 240V AC/50Hz Max load current: 10A Max load power: 2400W Working Voltage: V AC Voltage Frequency: 50Hz Working Current: 10A Working Temperature: 0-50 C Product Care Only use a soft, dry cloth for cleaning the product; do not use a damp cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent or other chemicals. Wipe off any dirt or dust on the power plug pins with a clean, dry cloth. Version 1.0 Date 05/

18 Power Meter Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet ALDI s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Phone us on or write to us at: Tempo (Aust) Pty Ltd ABN PO Box 6056, Frenchs Forest, NSW 2086, Australia Tempo Help Desk: (Aust) (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST) info@tempo.org 17 AUS

19 This page has been left blank intentionally. 18

20 ! Warranty returns Should you for any reason need to return this product for a warranty claim, you must include all accessories with the returned product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, contact our After Sales Support Centre on before returning it to the store for a refund. 19