Mobility & emobility

Transcription

1

2 Mobility & emobility History Company founded in Circontrol believes that innovation, internationalization, quality, and close contact with the clients is the most effective way to offer the best products and service. Activity Designer and manufacturer of Mobility (Total efficiency on car park solutions) and emobility (Intelligent recharging solutions for electric vehicles) solutions.

3 CirCarLife - Catalogue INDEX E Intelligent recharging solutions for electric vehicles E1 INTRODUCTION 5 E1.1 CHARGING MODES 5 E1.2 TYPES OF CONNECTORS 6 E2 WallBox smart charging system for car parks and communal blocks 7 E2.1 BASIC SERIES 8 E2.2 SMART SERIES 10 E3 POST Charging system for city streets and inter-city roads 12 E3.1 basic charging posts 13 E3.2 post URBAN smart series 15 E3.3 SMART CHARGING POSTS SERIEs 17 E3.4 TWO WHEELS VEHICLE CHARGING SYSTEM 19 E4 MULTIPOINT SYSTEM 21 E4.1 MASTER CONTROLLER 22 E4.2 SLAVE WALLBOX 24 E5 QUICK CHARGING SYSTEM 26 E5.1 QUICK CHARGING ADVANCE SYSTEM 27 E5.2 QUICK CHARGING COMPACT SYSTEM 29 E5.3 QUICK CHARGING COMPACT & COMBO 2 SYSTEM 31 E6 MANAGEMENT AND CONTROL SOFTWARE 33 E7 ACCESSORIES 34 E7.1 SMART STANDALONE DATA CENTRALISING UNIT 34 E7.2 COMMUNICATION ACCESSORIES 35 E7.3 PRE-PAYMENT SOLUTIONS 36 E8 TECHNICAL FEATURES 37

4 1 4 ULTRA-fast charging system electric vehicle charging in city streets electric vehicle charging in Public car parks (indoors) electric vehicle charging in Car parks (OUTdoors) electric vehicle charging in COMMUNAL blocks

5 CirCarLife Intelligent recharging solutions for electric vehicles E1 INTRODUCTION E1.1 Charging modes The EV charging process is regulated by the IEC and IEC international standards. These standards define the different charging modes and the type of connection required to charge EVs. All CirCarlife products have been created and designed in compliance with the strictest European regulations and standards, prioritising the end user s safety. CIRCONTROL is a leading and constantly innovating company committed to developing its products and adapting them to market requirements. Mode 1 Technical features Standard electrical network connector, non-specific for EVs. Slow AC charging. The installation must be protected with circuit breakers and earth leakage protection elements. 1 Maximum 16 A per phase (3.7 kw - 11kW). Mode 2 Technical features 5 Standard electrical network connector, non-specific for EVs. Slow AC charging. The installation must be protected with circuit breakers and earth leakage protection elements. Maximum 32 A per phase (3.4 kw - 22kW). Special cable with an intermediate electronic device, with a control and protection pilot function. Mode 3 Technical features Electrical network connector, specific for EVs. Slow or semi-fast charging in single or three-phase installations. Protection elements included in the special infrastructure for EVs. Maximum 64 A per phase (14.8 kw - 43 kw). Direct connection of the EV to the charging unit. Mode 4 Technical features Electrical network connector, specific for EVs. Quick DC charging. Charging station, exclusively used for EVs. Maximum 400 A per phase (50 kw kw). Control and protection elements installed in the infrastructure.

6 E1.2 Types of connectors Type 1 SAE J1772 Regulation. 5 pins (L1/N, PE, CP, CS). Maximum 230Vac 32A single-phase (7.3kW). Type pins (L1, L2, L3, N, PE, CP, PP). Maximum 400Vac 63A three-phase (43kW). 6 Type 3 7 pins (L1, L2, L3, N, PE, CP, PP). Maximum 400Vac 32A three-phase (21kW). CHAdeMO Indirect connection between the EV and DC supply point. Control and protection elements installed in the infrastructure. Combined Charging System Combo 2 DC connector of the combined AC/DC plug-in charging system: The inlet of the plug-in connector can also be used for AC voltage charging with a type 2 AC plug. One inlet is required on the vehicle side for AC and DC charging.

7 CirCarLife Intelligent recharging solutions for electric vehicles E5. Quick charging system Description CIRCONTROL s ultra-fast charging stations offer the fastest way to recharge the current electric vehicles used. the innovative construc- tion design offers a quick charging solution that is easy to use and complies with the current standards (CHAdeMO, Combo...) for fast electric vehi- cle charging with direct current. ease of installation and electrical pro- tection to increase user safety are other major factors of consideration in the system design. Integrated communications in this device enable permanent connec- tion with a remote control station, which monitors the device charging data in real time and activates the device remotely, meaning it can be simply and fully exploited ADVANCE COMPACT COMPACT & COMBO 2 Integrated dispenser power unit Communication CHAdeMO Socket Combo Socket ADVANCE - - compact - compact & combo 2

8 E5.3 Quick charging COMPACT & COMBO 2 Description Circontrol CCQC (Compact combined quick charged) combine CHAdeMO (DC 50kW), Combo 2 (DC 50kW) and AC 43kW. Designed to support dual protocol CHAdeMO and CCS (combo 2) to cover all users needs, making suitable for business and commercial fleets as well as petrol station along the roads. The Compact Combined version has been adapted with latest communication protocols OCPP and XML. Circontrol offers an innovative scada software for remote control and as a management tool. Charging operator can friendly access to status information, graphics and charge reports according historical data registered. 5 Technical Features Quick Charging in 15 minutes User interface 8 LCD screen for user interaction 31 Start, Stop and emergency buttons Light indications for status RFID identification and prepayment Charging management Mode 3 and mode 4 locking mechanism Real time energy metering Time and consumption based prepayment modes Simultaneous AC & DC charging with maximum demand control Communications and protocols Remote control and monitoring of the unit through standard XML & HTML OCPP protocol integration Ethernet 10/100BaseTX communication and 3G (Optional) IP Rate: IP54 Security & Protection Temperature range -30ºC to +45ºC Protection against overloads, short-circuits and insulation faults with an automatic switch EV standards: IEC , IEC , CHAdeMO and CCS (combo 2)

9 Technical features Type Ref V in F Hz I in P in V out I out Connector type Charging Mode Technical Features Page Input Output CCL-QPC- CCS 400VAC 50/60Hz +/- 5% 80 A 58 kva 500V 120ADC JEVS G105 Mode 4 79 CCl-QPC- CH-CCS 120ADC (Connector 1) JEVS G105 (Connector 1) Mode 4 (Connector 1) 5 COMBO2 (CCS) 400VAC 50/60Hz +/- 5% 80 A 58 kva 500VDC 120 ADC (Connector 2) Type 2 COMBO (Connector 2) Mode 3 (Connector 2) CCL-QPC- CH-CCS- AC VDC (Connector 1) 120ADC (Connector 1) JEVS G105 (Connector 1) Mode 4 (Connector 1) 500VDC (Connector 2) 120ADC (Connector 2) Type 2 COMBO (Connector 2) Mode 4 (Connector 2) 400VAC 50/60Hz +/- 5% 143 A 103 kva VAC (Connector 3) 63A (Connector 3) Type 2 (Connector 3) Mode 3 (Connector 3)

10 CirCarLife Intelligent recharging solutions for electric vehicles E8. Technical Features 8 37

11 Quick Charge Combo CCL-QPC-CCS Type CCL-QPC-CCS Code AC Input AC power supply 3P + N + PE AC Voltage 400V AC +/- 5% Nominal input current 80 A (software limit control) Required power supply capacity 58 kva Power Factor >0,96 Efficiency Frequency DC Output Maximum output current Maximum output power Output voltage range Charge system 95 % at nominal output power 50 / 60 Hz 120 A 50 kw VDC DC charge Mode 4 (IEC /24) Electrical protections Overcurrent protections MCB Safety protection Network connection Ethernet General Compliance Enclosure rating Enclosure material Operating temperature Ambient temperature storage Operating humidity RFID system Display Power limit control DC Cable lenght Lights for status indication Interface protocol Dimensions (D x W x H) Weight Isulating system Cooling system Type Combo-2 (DIN 70121) RCD 30mA autorecovery (class A) 10/100BaseTX (TCP-IP) CE / Combo-2 (DIN 70121) EN IP54 / IK10 Zinced steel -10 to + 45 C (Heater system included) -20 to +60Cº 30 to 90 % RH Noncondensing ISO / IEC14443A / B 8" HMI DC by software 3 meters RGB colors indicator OCCP / XML 780mm x 650mm x 2060mm 440kg High frequency transformer isolation Air Cooling fans Optional devices Wireless Comunication Armonic Filter 3G/GPRS/GSM <13% THD MiD certified AC meter Active Energy Class B, Reactive Energy Class 2.0 Low temp. option -30 to + 45 C 79 8

12 Quick Charge Combo CCL-QPC-CH-CCS 8 80 Type Code Number of plugs 2 AC Input AC power supply CCL-QPC-CH-CCS 3P + N + PE AC Voltage 400V AC +/- 5% Nominal input current 80 A (software limit control) Required power supply capacity 58 kva Power Factor >0,96 Efficiency Frequency DC Output Maximum output current Maximum output power Output voltage range Charge system DC Charge 1 DC Charge 2 Electrical protections Overcurrent protections Safety protection Network connection Ethernet General Compliance Enclosure rating Enclosure material Operating temperature Ambient temperature storage Operating humidity RFID system Display Power limit control DC Cable lenght Lights for status indication Interface protocol 95 % at nominal output power 50 / 60 Hz 120 A 50 kw VDC Mode 4 (IEC /24) Combo-2 (DIN 70121) Mode 4 (IEC /24) JEVS G105 (IEC ) MCB RCD 30mA autorecovery (class A) 10/100BaseTX (TCP-IP) CE / Combo-2 (DIN 70121) EN CHAdeMO rev.0.9 certified IP54 / IK10 Zinced steel -10 to + 45 C (Heater system included) -20 to +60Cº 30 to 90 % RH Noncondensing ISO / IEC14443A / B 8" HMI DC by software 3 meters RGB colors indicator OCCP / XML Dimensions (D x W x H) Weight Isulating system Cooling system Optional devices Wireless Comunication Armonic Filter 780mm x 650mm x 2060mm 440kg High frequency transformer isolation Air Cooling fans 3G/GPRS/GSM <13% THD MiD certified AC meter Active Energy Class B, Reactive Energy Class 2.0 Low temp. option -30 to + 45 C

13 Quick Charge Combo CCL-QPC-CH-CCS-AC63 Type Code Number of plugs 3 AC Input AC power supply CCL-QPC-CH-CCS-AC63 3P + N + PE AC Voltage 400V AC +/- 5% Nominal input current Required power supply capacity 143 A (software limit control) 103 kva Power Factor >0,96 Efficiency Frequency DC Output Maximum output current Maximum output power Output voltage range AC Output Maximum output current Maximum output power Output voltage range Charge system 95 % at nominal output power 50 / 60 Hz 120 A 50 kw VDC 63 A 43 kw 400V AC 3P + N + PE DC Charge 1 Mode 4 (IEC /24) Combo-2 (DIN 70121) DC Charge 2 Mode 4 (IEC /24) JEVS G105 (IEC ) AC charge Electrical protections Overcurrent protections Safety protection Network connection Ethernet General Compliance Enclosure rating Enclosure material Operating temperature Ambient temperature storage Operating humidity RFID system Mode3 (IEC ) Type 2 (IEC6296) tethered cable MCB RCD 30mA autorecovery (class A) 10/100BaseTX (TCP-IP) CE / Combo-2 (DIN 70121) EN CHAdeMO rev.0.9 certified IP54 / IK10 Zinced steel -10 to + 45 C (Heater system included) -20 to +60Cº 30 to 90 % RH Noncondensing ISO / IEC14443A / B Display Power limit control DC cable lenght AC cable lenght Lights for status indication Interface protocol Dimensions (D x W x H) Weight Isulating system Cooling system Optional devices Wireless Comunication Armonic Filter MiD certified AC meter 8" HMI AC & DC by software 3 meters 5 meters RGB colors indicator OCCP / XML 780mm x 650mm x 2060mm 445 Kg High frequency transformer isolation Air Cooling fans 3G/GPRS/GSM <13% THD Active Energy Class B Reactive Energy Class 2.0 Low temp. option -30 to + 45 C 81 8

14 Circontrol has a network of distributors and representative agents all over the world, for further information contact with: Nº CIRCONTROL S.A. (Headquarter) C/ Innovació, 3 - Industrial park CAN MITJANS VILADECAVALLS (Barcelona) Spain Tel.: Fax.: circontrol@circontrol.com