BCM Electrocardiograph (Ver 1.2) Operation Manual

Transcription

1 Operation Manual BCM- 600 Electrocardiograph (Ver 1.2) Head Office/Factory 687-5, Sangoan-ri, Hongcheon-eup, Hongcheon-gun, Gangwon-do, Korea (zip ) Tel : Fax : Customer Service Dept. Tel : Fax : Address of Region Representative Im Erlengrund 20, D Oberhausen, Germany Tel : +49 (0) Fax : +49 (0)

2 OPERATION MANUAL Electrocardiograph (Ver 1.2) (FEB )

3 Table of Contents 1. Before using the product 3 2. Contacts 3 3. Product Guarantee 4 4. Symbols in the Manual 5 5. Operational Do s and Don ts 6 6. Precations for Electrical Safety 9 7. Characteristics and Principles of Composition of How to set 12 Precations for Settings 12 Checkpoints Before Use 12 Maintenance and Cleaning After Use Components of 14 Front & Operation Panel 14 Side & connection Description of Product Symbols 16 Screen configuration How to set 19 How to use MENU SETTING 20 EKG SETTING 20 Other Menu Setting 22 Default Set PRINT 26

4 Before Using the Product Thank you for purchasing 15. How to use RECORDS Power & Battery Specifications 30 AC Power 30 Battery Specifications EKG Measurement 32 How to connect ECG cable 32 Electrode Attachement 33 Electro Cardiography 33 For safe and efficient operation, please read the manual to learn about the functions of the product before use. Please keep this manual nearby to assist you with operating the functions of the product. The product should be used under the supervision of a medical- related certified professional. The product is used for examining patient s abnormal condition. For the safety of the patient, only the components or the accessories recommended by our company should be used. If you connect any accessories to the product that is not specified in the manual, please be sure to notify our company or an agency authorized to distribute our products. 18. Before Requesting After Sale Service Product Specifications Product Warranty 38 Contacts For various services and product information, please feel free to contact our salesperson at the following number. For any questions about use or setup of the product, please contact the following number. Technical Support BIONICS Co.,Ltd. Tel: For reporting defects or abnormalities, please note the model name, product serial number, purchasing date, and abnormal points before contacting us. Before Using the Product 3

5 Product Guarantee Symbols in the Manual The product you have purchased comes with a 1-year warranty from the purchasing date covering inferior materials and the manufacturing process. For the disposable products, a warranty is given for 6 months from the purchasing date or 6 months from its first use covering inferior materials and the manufacturing process. This warranty cannot be applied to consumption supplies such as the battery, external cables, cradle and disposable accessories. We are not responsible for any physical, financial and mental loss or damage and direct or indirect expenses caused by, or resultant from, accidental or special circumstances during the use of the product. The warranty is limited to the repair or exchange of the product by the authority of the company or the agency, for problems in materials or the manufacturing process which occurred during use under normal circumstances. The company has no legal responsibility for the confirmation of services, declarations or whole warranty beyond the warranty specified above, which were supplied or will be supplied by the agency or the staff of the company at their own discretion. The user cannot request the company of services, declarations or whole warranty which were supplied or will be supplied by the agency or the staff of the company at their own discretion based on the statements above. Some symbols are used in this manual to help users or patients use this product safely and appropriately and to prevent any risk to patients or damage to materials. Please read and understand all warnings and precautions. Each symbols mean : WARNING The Warning symbol indicates that a dangerous situation may occur resulting in fatal injury or death of the patient, or may incur material and financial damage when the warning is ignored. CAUTION The Caution symbol indicates that a situation may occur resulting in injury or damage to the patient, though not life-threatening, when the caution is ignored. NOTE The Note symbol is used to inform you of important, but not dangerous, information regarding installation, use, and maintenance of the product. The contents of this warranty represent all other warranties indicated or implied, and also represent all kinds of service- related responsibilities of the product sellers for the product they sell. The product was manufactured under strict quality controls and the inspection process of the company. The indemnification standard for product repair and exchange is according to the Economic Planning Board notification Regulation for the indemnification of consumer damage WARNING Use of this product is prohibited during MRI photographing. A fire may breakout from the induced current, and the accuracy of the product and the MRI may be influenced by cross interference. All cables should be set properly. Cables and hoses etc. should be kept away from the patient, so that there is no possibility of the patient s neck being entangled in them, and the cables and lines should be well arranged for the safety of the staff in the hospital. The computerized ECG analysis should be judged by qualified medical professionals, and it should not be the sole basis in determining necessity of treatment for the patient. 4 Product Guarantee Symbols in the Manual 5

6 Operational Do s and Don ts Do not operate or store the equipment under the following environments. Locations exposed to chemical or explosive gases. Make sure to prevent dust, especially metal debris, from penetrating in. Avoid damp locations, and do not operate the equipment with wet hands. Locations where the machine is exposed to direct sunlight. Disassembling of equipment should be done only by authorized personnel, otherwise we will not be required to provide, any services. Do not plug in the power unit, until installation is completed, otherwise, damage may be caused to the equipment. Locations where the temperature fluctuation is rather large. (Operational temperature range: 10~45 (C, Moisture level : 30~85%) Locations close to electrical heating apparatuses. When pulling out the power cord, be sure to hold the plug and pull, not the cord. Locations where moisture level increase considerably or where air is not ventilated properly. Locations where sudden impact or vibration could be received. Standard operational conditions are as follows. Temperature : 10 ~ 45 (50 ~ 113 ) Altitude : 70 ~ 106kpa Humidity : 30 ~ 85% Standard storage and transportation conditions are as follows. Temperature : -10 ~ 50 (14 ~122 ) Altitude : 70 ~ 106kpa Himidity : 20 ~ 95% 6 Operational Do s and Don ts Operational Do s and Don ts 7

7 Precautions for Electric Safety CAUTION The product may not work well when it is kept or operated beyond the temperature and humidity specified. If you want to turn off the while you re operating, please use the power switch where is the front of the product. When you keep or operate the product in large temperature difference, product malfunctioning can be happened because of humidity of battery pack. Please operate product after keep it room temperature for three hours. CAUTION Leakage, heating, ignition or rupture of the battery may cause fire or injury. Do not use batteries beyond those specified in this manual. Do not short-circuit the battery and do not heat, disassemble, or dispose of it in a fire. Do not mix using the used battery with new batteries, different kind of batteries, other company batteries Do not insert batteries with (+) and (-) ends reversed. When the product is not used for a long time, separate the battery from the product. To ensure the lifecycle and safety of battery, please discharge the battery and then charge perfectly again every six months. Also time-worn battery exceed 24 months should be replaced. When the product has been moved, make sure to turn it off and arrange the accessories in order. Injured cords or cables may cause fire or electric shock. Please check the following points before use. Is the product supplied with the appropriate power? (100~240VAC) Are all connecting parts (power cables or the product) properly connected? Is the product completely grounded? (If not, noise may occur.) Before turning the power on, is the accessory for measuring the target parameter well connected to the product? NOTE To prevent electric noise during use, the product should be installed apart from dynamo, X-ray equipment, broadcast equipment or portable cables. An inaccurate result may occur when these equipment are placed near the product. requires an independent power circuit and a stable earth connection. Sharing power with other electric equipment may result in inexact results. NOTE is classified as follows : Type 1 for electric shock, CF grade Please do not use this product near inflammable anesthetics and diluents. Calssification is Class IIb The noise level is B Class according to the IEC/EN (Safety of Electric Medical Product), and the noise redemption is B Level according to the IEC/EN (Electromagnetic Compatibility Requirements) Protection grade against water is IPX 0. 8 Operational Do s and Don ts Precautions for Electric Safety 9

8 Characteristics and Principles of Composition of (Accessories) is a 12-channel ECG recorder, measuring the patient s electrocardiogram. BCM- 600 provides Auto-Diagnosis and the required parameters for the patient s ECG records & Diagnosis. In addition, it can be used effectively in ECG chart management with the printed paper including the patient s information and user s information Considering the convenience of users, it is available to measure ECG, to save data, to apply the filter, to extract the parameters and to get Auto-Diagnosis by pressing the button only one time, and then, it prints in 4inch sized paper Also, it can be easily used for an emergency or transport situation by built-in-battery and portable weight Standard Accessories Main 1 set Limp (4EA) EKG Cable 10 lead type (1EA) Chest electrode (6EA/1set) Features 12 channel ECG waves are configurated with 3channels and 6channels. They can be printed in 4inch sized or 2 inch sized paper prints the ECG, HR, PR interval, QRS interval, QT interval, QTc, P-R-T-axis calculated automatically in the report form. provides the various diagnosis by Auto-Diagnosis can be used in transport by the built-in-rechargeable battery. can be used effectively in ECG chart management with the printed paper including the patient s information and user s information can manage about 30pcs of data and print again after amendment. ECG Gel (1EA) Adapter(1EA) 15V 3Ah Power Cord Operation Manual (1EA) Roll Paper (1EA) Ground Cable (1EA) 10 Characteristics and Principles of Composition of (Accessories) 11

9 How to Set (1) Precautions for Settings Pay attention when setting for the following points - Use under conditions of of circumstantial temperature and 30% 85% humidity. - Check the connection status of the power cord. - Do not connect multiple cords to the power supply. - Place the main body on a flat area. - If noise occurs, ground the equipment. - Do not use any electric cords generating connecting noise. - Take care since the product can be broken by mechanical shock. - Get rid of dust or inflammable material near the product when setting it up. (3) Maintenance and Cleaning After Use A. Keep the product cleans by cleaning it using a soft cloth at least once a month. Do not use thinner, ethylene, oxidant or lacquer since these may damage the product. B. Keep the accessories clean of dust or foreign materials. For cleaning, use a soft cloth and clinical alcohol. C. Do not soak the accessories in liquid or detergents. Keep the product and accessories out of any liquid. D. For the protection of the environment, please contact the agency you purchased the product from when you wish to discard the E. Our product can be used semipermanently. Please contact our Customer Service dept. or any distributor and then replace the parts, when wasting parts such as battery, LCD or LED and so on have a problem. (2) Checkpoints before Use Check the following points before measuring the patient s condition. - Make sure there is no mechanical risk. - Check the lead, power plug, and accessories connected on the outside. Precautions Before Use 1 Do not use product near dynamo, X-ray equipment, broadcast equipment. 2 Do not twist the cable. 3 Attach each Lead properly. 4 Keep the patient motionless with comfortable position while measuring 12 How to Set How to Set 13

10 Components of (1) Front & Operation Panel (2) Side & Connection (1) AC Power Button (2) Screen Shift Button (3) FREEZE Button (4) GAIN Button (5) PRINT START Button (6) SPEED Button (7) EXIT Button (8) MENU Button (9) LCD SCREEN (10) PAPER LOCK (11) PAPER Cover (12) AC Power LED (13) DC Power LED (1) Connecting part with Patient cable (2) USB Port (3) RS-232(For Upgrade) (4) LAN Port (For Upgrade) (5) Power Adapter (6) Potential equalization stud 14 Components of Components of 15

11 3. Description of Product Symbols Symbol Comments Symbol Description (1) Screen Configuration Type CF Product, Defibrillation protected Screen Shift Power stand-by switch Wave Freeze Wave speed change Start Printing (Printer) Attention, consult accompanying documents Equipotentiality Wave size change Initial Screen (Exit) Direct Current Signal Output (Fig1. Main Screen) Signal On/Off RS-232C Port Use for Program Upgrade REF Catalogue number LAN Port Use for Central Monitoring 1 WAVE Area : Display the graph of electrocardiogram 2 Wave Property Area : Display the Speed and Size of electrocardiogram 3 Each measuring Mode icon : Display the status of measurement, printing and so on.(refer SN Serial number Manufacturer the following page (Table 1) Explanation of Screen Icons) 4 Time : Display the present time EC REP European Community Representative Date of manufacture 5 HR : Display the Heart Rate of a Patient Protection against vertically falling drops of water User's Manual operating instructions 0120 CE Mark 16 Description of Product Symbols Description of Product Symbols 17

12 (Table 1). Explanation of screen icons Icon Meaning How to display How to Use (1) How to Use R Limb Electrode (R) lead check Normal (Green) Abnormal(Red) Step 1) Turn on the main power switch at the back of the product. Check the light-on status of L Limb Electrode (L) lead check Normal (Green) Abnormal(Red) the AC LED in the front, and push the power switch 1~2 seconds to turn it on.(if any problems occur, refer to the How to solve the problems section in the manual) F Limb Electrode (F) lead check Normal (Green) Abnormal(Red) Step 2) If you want to change the setting value etc. during use, push the Menu button to C1 Chest Electrode (C1) lead check Normal (Green) Abnormal(Red) change the setting values per each measurement parameter C2 Chest Electrode (C2) lead check Normal (Green) Abnormal(Red) Step 3) When the measurement sensor is connected to the patient, the information of the C3 Chest Electrode (C3) lead check Normal (Green) Abnormal(Red) patient electrocardiogram is displayed as values and waveforms on the LCD screen C4 Chest Electrode (C4) lead check Normal (Green) Abnormal(Red) C5 Chest Electrode (C5) lead check Normal (Green) Abnormal(Red) NOTE C6 Chest Electrode (C6) lead check Auto diagnosis Normal (Green) Abnormal(Red) Flickers at 1-second interval. Push the Power button 1~2 seconds when turn it off and then Power off massage will be displayed. Printing Flickers at 1-second interval. Waveform stop Flickers at 1-second interval. AC in use Fixed. Battery in use Fixed. 18 Description of Product Symbols How to Use 19

13 MENU Setting All of the Menu can be controlled by Menu button. The way to control is as below EKG Lead change To change the EKG Lead Wave setting, Roll the menu buttons to right or left and select by press it Step 1) To change the default setting, press the Menu button once, then you can see the below display MENU MENU PRINT PATIENT SETUP EXIT MENU MENU PRINT PATIENT SETUP EXIT EKG LEAD SPEED GAIN FILTER MUSCLE BASELINE NOTCH Return LEAD - 3X1-3X2-6X1-6X2 Return After moving to Menu you want to change, by rolling to left or right the Menu button, you can select the Menu by press (the triangle on the right side of Menu means that there are more menu) Lead of provides the 4 kinds of screen EKG channel conversion can be done by press the Lead key - 4 different configurations are as below; Step 2) Each Menu can be changed by the above mentioned way (by rolling to right or left the menu button and press) (1) EKG setting MENU MENU EKG LEAD 3 X 1 3 X 2 PRINT SPEED PATIENT GAIN SETUP FILTER EXIT MUSCLE BASELINE NOTCH Return 6 X 1 6 X 2 20 MENU Setting MENU Setting 21

14 (2) Other Menu setting PRINT Menu Changeable Range Description Please refer the below table for the other menu EKG Menu LEAD SPEED GAIN Changeable Range 3 x 1 3 x 2 6 x 1 6 x mm/sec 25.0 mm/sec 50.0 mm/sec 5 mm/mv 10 mm/mv 15 mm/mv Description Select the Configuration type of EKG wave to be displayed (same way in printing) Select EKG Wave processing speed Select EKG Wave Size MODE WAVE SIZE BRIGHTNESS RECORDS MONITOR DIAGNOSIS FREEZE MONITOR : Patient s information, WAVE display DIAGNOSIS : Patient s information, WAVE, Diagnosis information FREEZE : Patient s information, WAVE output 2 ~ 9 sec. Time control for the WAVE print 1 ~ 3 stage Control the Output Density (1-Dull,2-Normal,3-Dark) 30 pcs Refer the How to use Record on page 27 FILTER 40 Hz 100 Hz 150 Hz Select EKG Filter NOTE The print processing speed, size, and channel settings comply with the setting value MUSCLE BASELINE NOTCH ON ON 50 Hz 60 Hz Muscle Artifact filter setting Baseline filter setting If there is input, the elimination frequency is set. on the LCD screen. To print what are on the screen, as they are, it makes users to get more accurate judgments In order to change the print processing speed, size and cannel setting, Press the Menu button to EKG menu, where you can change the setting value on Freeze in Print Mode, you can print as they are,after checking the waves on the screen In case of no paper, "PAPER OUT" appears and you can not print Open the printer paper cover 4 inches of the paper to be printed facing up, please NOTE insert. Perforations, past the end of the paper should be positioned. The choice of the filter may distort the original signal Therefore, you d better use appropriately only in case the recorded signal is bad so that the distortion of ECG signal can be reduced And we recommend you to apply the Baseline filter and Notch Filter all the time and to apply appropriately Muscle filter 150Hz of filter is recommend in case of printing Diagnosis CAUTION Do not print greater than consecutive 3 times There is possibility of fire, Do not use printing for 5min. after consecutive 3 times of printing. 22 MENU Setting MENU Setting 23

15 PRINT Menu Changeable Range Description (3) Default setting NAME ID AGE Within 16 characters Within 16 characters, 0 ~ 110 age Patient s name setting Patient s Serial no. setting Patient s age setting The default settings of the values can be used, without the need of changing the setting values of each parameter. WEIGHT HEIGHT SEX, 0~300Kg, 0~250cm FEMALE MALE Patient s weight setting Patient s Height setting Patient s gender setting Parameter EKG Item Name LEAD SPEED GAIN FILTER Neonate - 6 x mm/sec 10 mm/mv 40 Hz SETUT Menu HOSPITAL DATE&TIME Initialize DEMO LANGUAGE Changeable Range Within 16 characters Year, Month, Day, Hour, Min. ON English Description Hospital name setting Date/time setting Initialization (Default Set referrence) DEMO MODE setting Language Select PRINT PATIENT MUSCLE BASELINE NOTCH MODE WAVE SIZE BRIGHTNESS NAME ID AGE WEIGHT 50 Hz MONITOR 3 sec 2(Normal) PATIENT ID-001 HEIGHT SEX HOSPITAL BIONICS SETUP DEMO LANGUAGE ENGLISH 24 MENU Setting MENU Setting 25

16 PRINT The print processing speed, size, and channel settings comply with the setting value on the LCD screen. To print what are on the screen, as they are, it makes users to get more accurate judgments. In order to change the print processing speed, size and cannel setting, press the Menu button to EKG menu, where you can change the setting value. If you use an USB Flash Memory, you can save a printed data to an USB Flash Memory. When you save a printed data to an USB Flash Memory, print information will not be printed. (You can use it in case of no paper) For more information about USB SAVE, please refer to the PC Program manual provided by our company. Please refer the below table for the contents of other PRINT Menu. PRINT Menu Changeable Range Description NOTE In case of no paper, "PAPER OUT" appears and you cannot print Open the printer paper cover 4 inches of the paper to be printed facing up, please insert. Perforations, past the end of the paper should be positioned. CAUTION Do not print greater than consecutive 3 times. There is possibility of fire, do not use printing for 5min. after consecutive 3 times of printing. When you save a printed data, don't remove an USB Flash Memory until the save progress is complete. Please use an USB Flash Memory listed in ' Viewer Manual'. If not, it may cause malfunction of the product. MODE MONITOR DIAGNOSIS FREEZE Print Menu Setting MONITOR : Patient's information, WAVE display DIAGNOSIS : Patient's information, WAVE, Diagnosis information FREEZE : Patient's information, WAVE output WAVE SIZE 2 ~ 9 sec. Time control for the WAVE print BRIGHTNESS RECORDS 1 ~ 3 stage 30 pcs Control the Output Density (1-Dull, 2-Normal, 3-Dark) Refer the How to use Record on page PRINT PRINT 27

17 How to use RECORDS NOTE has stored the late 30pcs of printed data MENU MENU PRINT PATIENT SETUP EXIT PRINT MODE WAVE SIZE BRIGHTHESS RECORDS Return Select RECORDS on Print Menu by press Menu button 1. Press Menu button after moving to Menu wanted to select by rolling the Menu button to right or left (1) The data entry area already printed (2) Print Key (3) Cancel Key (4) Print properties 2. In order to change the print properties, press the Menu button after moving to that properties by rolling the Menu button to right or left 3. To print, select Print Menu. And to move to no.1, select CANCEL 4. Press EXIT button to close Menu 28 How to use RECORDS How to use RECORDS 29

18 Power & Battery Specifications Both AC and DC power is used for. Basically, AC power is used and a rechargeable battery is available for portable use. CAUTION When the battery is removed, all data can be reset. Only in case the product is kept for long time, Remove the battery from the product 1. AC Power (110~240VAC) If the AC power is connected to the main body of the product, a light-green color lights up on the AC LED on the front. If the product is not being used, the power changes automatically to the recharging mode. C. Natural lifetime for spontaneous discharge of battery The table below shows the lifetime for spontaneous discharge of the battery when the product is unused. Storage temperature Life for spontaneous discharge A. Type of Adaptor 0 ~ 20 9 months - Model : MW160 (KA1503F02) - Input : 100~240V(AC), 50~60Hz - Output : 15V(DC), 3Ah - Manufacturer: BridgePower Corp 21 ~ ~ 45 6 months 3 months CAUTION During operation using AC power, noise may occur in the waveform. If this is the case, ground the product soundly. An AC power connection in a wet or damp area may cause electric shock or fatal damage to the product. When you connect the adapter will charge the battery automatically 2. Battery Specifications When the AC power is disconnected and the switch is turned on, the power is supplied using the battery, signaled by the orange light on the battery LED. A. Signs for Battery D. Type of Battery The same sort of battery should be used for replacement. - Model : 3S2P(LS18650) - Type : LI-Ion Battery E. Time for the Battery exchange The lifetime of the battery gets shorter if it is not 100% recharged for use Charge / Discharge ration Number for use 100 % Charge / discharge 1200 times 50 % Charge / discharge 500 times 30 % Charge / discharge 200 times Battery status Explanation Battery full After use for 50 ~ 60 minutes Requiring recharging Low battery requiring recharging B. Time for 1 ea of battery Recharging time : 9 H(OP Mode), 6H (Power Off Mode) Use time :240 minutes CAUTION For the protection of the environment, please contact the agency you purchased the product from when you wish to discard the battery. Contact the agency you purchased battery in case battery should be changed. To ensure the lifecycle and safety of battery, please discharge the battery and then charge perfectly again every six months. Also time-worn battery exceed 24 months should be replaced. 30 Power & Battery Specifications Power & Battery Specifications 31

19 EKG Measurement A. How to Connect the ECG Cable WARNING With the use of an electric pacemaker, do not touch the patient, table, or other equipment. Check if the ECG cable is damaged before taking the ECG measurement. (A damaged ECG cable cannot protect the patient.) Do not use disposable electrodes. (They may cause noise.) When the patient is on stable condition, lay him down on the bed. Then spread EKG gel all over the parts where the electrodes are to be attached. Please confirm the EKG signal on LCD screen after attaching the patient electrodes to the patient Please rub the skin with the gel, the alcohol or the water before measuring the patient Attach the patient s electrode to the sites shown below. B. Electrode Attachment Check the status of the electrode attachment When you measure a patient's condition - Make sure if there are mechanical hazards or not - Check the cable connected to External and accessories. - Check all of the measuring instruments to measure the patient C. Electro Cardiography After attaching electrodes to the patient, Turn the power switch Set the filter, Wave size, printing speed, channel composition, printing time, diagnosis. Input the patient information Check the state of ECG signal and the state of Lead through the LCD screen. Check the electrode connection if the signal is in bad condition records the patient s ECG by press printer button analyzes and prints the cumulated ECG data for 10 seconds. Please wait will be appeared in case the ECG data are cumulated within 10seconds. Press printer button in order to stop working for ECG analysis or to stop printing V1 = C1 V2 = C2 V3 = C3 V4 = C4 V5 = C5 V6 = C6 RA = R LA = L R.L = N L.L = F 32 EKG Measurement EKG Measurement 33

20 Before Requesting After-Sales Service This section shows how to treat simple problems encountered during use. Please check the following points before requesting after-sales service Problems in Display Sign The power of the product is not turned on. The power of the product turns off suddenly during use. How to treat 1. Check if the AC power is supplied.. 2. Press and hold the power button for 2 seconds 1. Check if the power is off due to battery release. 2. Check if AC power is supplied to the product. Problems in Printer (OPTION) Sign No printing Noise during printing How to treat 1. Check if the printer icon blinks on the screen. 2. Check if the paper is set normally. 3. Check if the printer door is closed. 1. Check if the roller is contaminated with foreign materials or if the gear is out of position. 2. Check if the problem is due to a paper jam (change the paper) The power of the product is not turned off. The waveform is not normal. 1. Press the power button during 1~2 seconds 2. Check if Power off message is shown in display. 1. Check if there is any equipment with a strong magnetism around the product. 2. Check if the cable connection is stable. 3. Check if the product is grounded. Problems in Measurement ECG Sign The ECG waveform is not displayed. Severe noise on the waveform. How to treat 1. Check if the cable connection is stable. 2. Check if the ECG cable is damaged. 1. Check if the electrode attached to the patient is stable. 34 Before Requesting After-Sales Service Before Requesting After-Sales Service 35

21 Product Specifications 1) Features - LCD Graphic Display 800 X 480 dots, 3x1/3x2/6x1/6x2 - Channel with base line movement possibility - Standard 6 channels - Real time heart rate display - Real time display and print out - Various patient information - (Patient Name, Sex, Age, Weight, Height) - High Resolution Thermal Printer - Defibrillator protection - Rechargeable Battery Operation 3) Physical Specifications - Power requirements : AC 100 ~ 240V, 50/60Hz - Power consumption : 50VA(MAX) - Battery: LI-Ion, 11.1V, 4400mAh - Continuous operating time with battery : Max 4Hours - Dimension : 327(W) X 206(L) X 87(H) mm (W x D x H) - Weight : 1.75Kg(Incl. battery) 4) Interface - RS-232C port - LAN Port (Program upgrade) - USB Port (Data storage) 2) Specifications - Diagnostic Electrocardiography Input circuit : Floating input Leads : Standard 12 leads Input impedance : 20Mohm min Input circuit current : 0.05 A max Calibration voltage : 1mV with ± 2% CMR : 100dB or more Polarization voltage : ± 350mV min Time constancy : 3.2 seconds (0~+20%) Sensitivity : 5, 10, 15 mm/mv ± 5% Frequency response : 0.05 ~ 100Hz (13dB) Filters : AC50/60 Hz, -20dB or lower, Muscle tremor 35 to 45 Hz, -3db(-6db/oct) A/D conversion : 12bits Sampling rate : 2msec 5) Operating Environment - Temperature : (Operating : 10 ~ 45 / Storage : -10 ~ 50 ) - Humidity : (Operating : 30 ~ 85% / Storage : 20 ~ 95%) - Atmospheric Pressure : (Operating : 70 to 106 kpa / Storage : 70 to 106 kpa) 6) Product specification listed on the manual are subject to change according to the our design change procedure without notice. 36 Product Specifications Product Specifications 37

22 Product Warranty Product Name Model Code Electrocardiograph Manufacture Approval No. Manufacture Approval Date Manufacture Serial No. Warranty Period Purchase Date Customer Information Name of Hospital No One year after the purchase date Date Month Year Address Name Tel Name of Distributor Name of Manufacture Tel) BIONICS Co., Ltd. Fax) Thank you for using This product is a medical device. Only the products that have Passed our extensive and thorough quality tests are offered to our customers Our policies on repairing, exchange and refund complies with Regulation on Consumer Protection & Compensation Standards issued by Economic Planning Board of Korea