Modul-Connect VEHICLE ELECTRICS MADE SIMPLE

Transcription

1 Modul-Connect VEHICLE ELECTRICS MADE SIMPLE

2 BENEFITS WITH THE MODUL-CONNECT DIGITAL WIRING AND CONTROL SYSTEM Integrated battery guard Electronic fusing Low weight Reduced downtime Flexible Water resistant Guaranteed for 2 years Second life

3 Modul-Connect MODULAR, DIGITAL WIRING AND CONTROL SYSTEM With Modul-Connect vehicle electrics are made simple. Thanks to plug & play functionality, the system can be installed quickly and safely, without the need for experienced electricians or complex programming. Modul-Connect is a modular, digital wiring and control system for light commercial vehicles. Using a unique digital signal to control all electrical components connected to the system, it allows multiple products to be powered and switched along a single cable simultaneously and with extreme reliability. Because the system is modular, it can be tailored to suit every need. The modularity also makes it extremely flexible, and easy to adapt if the requirements change. Modul-Connect comes with an inbuilt battery guard, which will protect the vehicle s start capacity. It is also extremely resistant to dust and water (IP67). In addition, it is electronically fused to prevent accessories from breaking in the event of a short circuit. As it is a stand-alone solution, not connected to the vehicle s CAN bus system, it will not be effected by, for example, software updates from the vehicle manufacturer. In addition, it is lightweight. For customers who have a lot of electrical components in their vehicles, Modul-Connect can offer a significant weight reduction. Example sketch of a vehicle wired up with Modul-Connect digital wiring and control system.

4 MODUL-CONNECT BASE KIT The base kit consists of the products required to wire two warning beacons / a light bar, work lights and interior lights in a vehicle. All products are controlled by switches. The system, which can easily be expanded, is electronically fused and has an in-built battery guard. Modul-Connect base kit CABLE ASSEMBLIES AND CONNECTORS The plug & play cables are used for expanding the base system. The cables are connected using T-pieces, and are available in several lengths Cable assembly Cable assembly, unplugged T-piece connector REMOTE CONTROL The RF unit enables you to turn beacons, interior lights and work lights on and off using a remote control. The remote will work from a distance of 50 meters. RF unit beacon / interior light / work light

5 CONVERTERS Electronically fused converters, without the need for programming, which are used for connecting additional products to the Modul-Connect system. By using the compatible switch, it is possible to manage the component from a convenient location in the vehicle. Handbrake switch converter Battery guard warning buzzer Inverter converter Cabin light converter Hand wash converter Auxiliary socket converter Interior light converter 4A When more than 3A is needed for interior lighting

6 SWITCH PANELS Switch panels with LED light are available in several configurations and with multiple panels. Plug & play installation and self-adhesive fixing makes them easy to install. For use together with the compatible converter. Please refer to our website for vehicle specific mounting brackets for the switch panels. 3-way switch Beacon/inverter/hand wash 3-way switch Beacon/interior light/work light 3-way switch Inverter/cabin light/hand wash * * * * Unplugged * Unplugged * Unplugged 2-way switch Inverter/cabin light 1-way switch Inverter 1-way switch Cabin light * * * * Unplugged * Unplugged * Unplugged 1-way switch Hand wash 1-way switch Interior light A, B & C * * Unplugged * * * * Unplugged

7 POWER INVERTERS By using a power inverter, it is possible to run 230V equipment from the vehicle battery. We offer a range of high quality, pure sinewave DC to AC power inverters. All inverters feature a low battery alarm to prevent total battery discharge and overload and over-temperature shutdown to protect the inverter and the conversion. Power inverter 400W Power inverter 600W Power inverter 1000W Available autumn Available autumn Power inverter 2000W Power inverter 3000W Remote switch, inverter Not compatible with 3000W The Modul-System inverters ( 1000W) have a display panel for battery status and load measurement, EU output socket/sockets and a USB port for charging USB devices.

8 BATTERY CHARGERS By using a battery charger you ensure that your auxiliary battery bank is always properly charged. We install both DC-DC and AC-DC chargers. The Modul-System battery chargers are compatible with all light commercial vehicles, including those with smart alternators, regenerative braking technology and start/stop functionality. Battery Charger DC-DC 30A Remote voltage monitoring and temperature probe POWER SOCKETS 12V power sockets with surface mounted housing. The double socket comprises of one power socket and one USB socket with double output. 12Vdc power socket 12Vdc power socket + USB 5V 1A/2.1A

9 HEATERS A heater will make sure that the vehicle is warm, even when the outside temperature is low. We offer both water and air heaters. The water heaters will pre-warm the engine / cabin, while the air heaters are suitable for warming up the load compartment / cabin. Eberspächer Airtronic D2 & D4 U-kit Airtronic D2 & D4 MSN Airtronic Vehicle Installation D2/D4/D Eberspächer Hydronic 2 Economy D4S + U-kit + fuel pipe Fuel pipe 2mm L=450 Eberspächer EasyStart Timer

10

11 LIGHTS & BEACONS Both efficiency and safety can be improved with good lighting conditions. Our high-quality LED lights are specially designed for the vehicle s cargo space, and have received all relevant accreditations, including the E mark. In addition to interior lights, we offer a wide range of beacons, light bars, work lights, etc. Lightbar

12 Beacon, amber glass 12/24V Beacon, white glass 12/24V Beacon with magnetic base, amber glass 12/24V Beacon adapter, flat Beacon adapter 3-1 point Beacon adapter roof bar, low Beacon adapter roof bar, high

13 Strobe light, flat 12/24V Strobe light, 135 degrees 12/24V Strobe light, 180 degrees 12/24V , Strobe light for grill 12/24V Strobe light, corner 12/24V Work light 18W 12/24V Work light with magnetic base 18W 12/24V Work light 48W 12/24V Work light with magnetic base 48W 12/24V

14 AMBIENT / WORKBENCH LIGHTS LED lights in robust design that are easily mounted on the vehicle ceiling or over a workbench. Thanks to the integrated constant current circuit, the LED brightness will not fluctuate with an increase/decrease in the battery voltage. Ambient/Workbench ligh Ambient/Workbench light with switch DRAWER/SHELF LIGHTS The patented LED lights can be mounted either on a drawer unit or in a shelf. Thanks to the integrated constant current circuit, the LED brightness will not fluctuate with an increase/decrease in the battery voltage. Drawer / shelf light

15

16 Copyright Modul-System Ver MODUL-SYSTEM