Digital Auto Multi-Tester
|
|
- Clyde Hunter
- 5 years ago
- Views:
Transcription
1 Digital Auto Multi-Tester ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at To prevent serious injury, read and understand all warnings and instructions before use. Copyright 2007 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call
2 Specifications Construction Thermoplastic with LED Display Input Voltage 9-35 VDC Operating Temperature F. at <75% Humidity Storage Temperatur e 4-22 F. at <85% Humidity Circuit Breakers Overall Dimensions Dual 8 Amp Intended For 2 "W x 7-5/8"L x -3/4" T N et Weight:.7 LBS. Product Features Automotive multifunction tester will test Battery Voltage, Battery Condition while Starting, Checks Interior and Exterior Lights, Checks Relays, Checks Power Windows and Electric Motors, Checks all LED Sources. Includes LED Flashlight, Voltage Source and Warning Buzzer, and Dual 8 AMP Circuit Breakers. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool!. Keep work area clean. Cluttered areas invite injuries. 2 Volt Automotive Systems 2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids. Be aware of the inherently dangers of working on a gasoline engine. Be careful when working with hot engine components; stay clear of moving engine components. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. 4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 5. Use the right tool for the job. This automotive multi-tester is intended for use in gasoline powered engines. Do not modify this tool and do not use this tool for a purpose for which it was not intended. This tool is not intended for any aircraft purpose. SKU For technical questions, please call Page 2
3 6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Use eye and ear protection. Always wear ANSI approved impact safety goggles when working on gasoline engines. 8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. 9. Maintain tools with care. Keep tester maintained and clean for better and safer performance. 0. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Any part that is damaged should be properly repaired or replaced by a qualified technician. 2. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 3. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. 4. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. Caution is necessary when near coil, spark plug cables, or distributor of running engine. Engine should be off during distributor adjustment. 5. Carbon Monoxide Warning: Be sure to work in a well ventilated place, or pipe exhaust gasses to the outdoors. Guard against exposure to Carbon Monoxide, which is an odorless, colorless gas produced by gasoline engines. Carbon Monoxide exposure may cause serious injury or death. 6. Read and adhere to all warnings in the service manual of the vehicle being worked on. 7. Do not use the Multi-Tester on any A/C electrical systems. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU For technical questions, please call Page 3
4 Unpacking When unpacking, check to make sure the following parts are included. Accessory Power Cord (2) Test Lead (23b) + Test Lead (23a) + Relay Test Lead (24a) Relay Test Lead (24b) Extension Lead (25b) + Extension Lead (25a) Test Probe (9) Power Cord Extension (20) Auto Multi-Tester Unit Battery Power Cord (9) (Please see parts list on page 8 and 9 for more information on these parts.) If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. LED Display Relay Test Jacks (on side) LED B V-CHECK Switch Power Test LEDs Converter Power Switch LED A OP -OUT Switch Light Switch Buzzer Switch Power Cord (22) SKU For technical questions, please call Page 4
5 About Automotive Electrical Multi-Testing An Automotive Electrical Multi-Tester can give you valuable information about the condition and operation of an automotive electrical system and its parts. Using this tool, you can: a) Find shorts and broken connections. b) Identify overloaded circuits. c) Test battery condition at rest and while starting engine. d) Check condition of lamps, relays and electrical motors. If you are not experienced in doing this type of diagnostic test, the work should be done by a qualified technician. Controls. To power the unit, connect the Power Cord to the vehicle s power supply using Battery Power Cord (9), Accessory Power Cord (2), and/or Power Cord Extension (20). 2. Set the V-CHECK switch in the OFF position. The display will show the voltage of the battery. 3. Press and hold the side of the Converter Power Switch (4). The Red Power Test LED will illuminate, and the Buzzer will sound repeatedly, if the Buzzer switch is depressed. 4. In this situation, if connected to the Test Pin Jack, the Test Probe (9) is energized with the battery voltage and can be used for further testing. CAUTION: The Test Probe (9) is powered and will create an arc and short circuit if touched to ground. This tester has circuit breakers built in to help prevent a fire in the event of a short circuit. 5. Press and hold the = side of the Converter Power Switch (4). The Green Power Test LED will illuminate, and the Buzzer will sound repeatedly, if the Buzzer switch is depressed and the Test Probe is connected to any vehicle ground. 6. Set the V-CHECK switch to the ON position. LED B will light. The display will show the voltage of the Test Probe connection, and the Converter Power Switch will be disabled. 7. Set the OP-OUT switch in the OFF position. The two additional Relay Test Jacks on the side of the unit will be disabled. SKU For technical questions, please call Page 5
6 8. Set the OP-OUT switch in the ON position. LED Light A will light. The two additional Relay Test Jacks on the side of the unit will be powered with the battery voltage, so they can be used if desired for additional power sources. These should be used in conjunction with the Negative Test Lead (23b) which can be plugged into the Ground Lead Jack at the top of the unit. 9. If light is needed, press the Light Switch which will light the bright LED at the top of the unit. This is useful as a flashlight when making or testing connections or components. NOTES:. The Ground Lead Jack is internally connected to the negative terminal of the battery. It can be used any time during testing as an active ground. 2. If the polarity connection of the battery lead is wrong, the Buzzer will sound continuously as a warning. The connection should be corrected before proceeding to prevent damage to any components. 3. If the current exceeds 8 Amps, or there is a direct short in the circuit, the circuit breaker will trip. Wait at least 30 seconds, repair the problem and press the circuit breaker reset button on the bottom of the unit. SKU For technical questions, please call Page 6
7 Operation Measuring Battery Voltage from Inside the Vehicle:. Connect the Power Cord (22) and the Accessory Power Cord (2) together. Plug the Accessory Power Cord into the accessory jack (cigarette lighter jack) in the vehicle. 2. Set the V-CHECK switch in the OFF position. The LED display will show the vehicle s battery voltage level. 3. If desired, you can start the engine while the test unit is connected to monitor the battery performance during starting and running. Measuring Battery Voltage:. Connect the Battery Power Cord (9) and the Power Cord together. If a longer cable is needed, connect the Power Cord Extension (20). 2. Connect the RED clip of the Battery Connection Lead to the POSITIVE terminal of the vehicle battery. Connect the BLACK clip of the Battery Connection Lead to the NEGATIVE terminal of the vehicle battery. 3. Set the V-CHECK switch of the tester unit in the OFF position. 4. Read the battery voltage on the LED display. 2+ volts is ideal, but readings from 0-4 volts are acceptable. Measuring Battery Voltage While Starting Engine:. Follow procedures discussed above. WARNING: Keep hands and loose clothing clear of all engine components during start up. Never reach into a running engine, serious injury may result. Operate internal combustion engines only in a wellventilated area as fumes may contain highly poisonous Carbon Monoxide, a colorless and odorless gas. 2. Observe and record battery voltage during start up. 3. Voltage will normally drop below 2 volts during start-up, then rebound above 2 volts to approximately volts as the alternator recharges the battery. Check your vehicle manufacturer s specifications for the proper readings. SKU For technical questions, please call Page 7
8 Checking Vehicle Interior and Exterior Lamps: NOTE: Before test, disconnect the lamp to be tested from the vehicle s electrical system.. Connect the Power Cord to the vehicle s power supply using Battery Power Cord (9), Accessory Power Cord (2), and/or Power Cord Extension (20). 2. Set the V-CHECK switch of the tester unit in the OFF position. 3. Connect the desired Test Leads to the Jacks at the front of the tester. Connect the Negative Lead to one wire of the lamp being tested. Touch the Positive Lead to the other wire of the lamp being tested. 4. Press the Side of the Converter Power Switch. 5. The lamp being tested should light; if not, the lamp is bad or the circuit is open. Testing Power Windows and Electric Motors: NOTE: Before this test, disconnect the motor to be tested from the vehicle s electrical system.. Connect the Power Cord to the vehicle s power supply using Battery Power Cord (9), Accessory Power Cord (2), and/or Power Cord Extension (20). 2. Set the V-CHECK switch of the tester unit in the OFF position. 3. Connect the desired Test Leads to the Jacks at the front of the tester. Connect the Negative Lead to one wire of the motor being tested. Touch the Positive Lead to the other wire of the motor being tested. 4. Press the = Side of the Converter Power Switch. 5. The motor being tested should run; if not, the motor is bad or the circuit is open. SKU For technical questions, please call Page 8
9 Testing Relays:. Connect the Power Cord to the vehicle s power supply using Battery Power Cord (9), Accessory Power Cord (2), and/or Power Cord Extension (20). 2. Set the V-CHECK switch of the tester unit in the ON position. 3. Set OP-OUT switch in ON position. 4. Connect the desired Test Leads to the Jacks at the front of the tester. Connect the Relay Test Leads (24a, 24b) to the Relay Test Jacks on the Side of the Meter. Connect the tester to the relay as shown in the diagram. 5. The voltage shown on the LED readout should be near the rated voltage of the battery (e.g.. 2 volts). (Example relay and connection shown. Relay types and testing procedures may vary.) Maintenance Electronic tools and components must be protected from water, moisture in the atmosphere and corrosive materials. Always handle this meter and its accessories with care and store in a cool, dry protected place. WARRANTY LIMITED YEAR WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 349 Mission Oaks Blvd. PO Box 6009 Camarillo, CA 930 (800) SKU For technical questions, please call Page 9
10 Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU For technical questions, please call Page 0
11 Assembly Diagram (Continued) Parts List Part # D escription Q TY. Part # D escription QTY. Front Cover 5 Contact Plate 2 2 Button Covers 2 6 Screw st 2.0 x Label Sheet 7 Overload Protector 4 4 Converter Power Switch 8 Power Cord Protector 5 LED Lens 9 Battery Power Cord 6 Relay Test Jacks 2 20 Power Cord Extension 7 Frame 2 Accessory Power Cord 8 Test Lead Jacks 2 22 Power Cord 9 Test Probe 23a Positive Test Lead (Red) 0 Probe Sheath 23b Negative Test Lead (Black) Back Cover 24a Positive Relay Test Lead (Red) 2 Foot Pad 2 24b Negative Relay Test Lead (Black) 3 Screw st 2.9 x a Positive Extension Lead (Red) 4 Strong Magnet 2 25b Negative Extension Lead (Black) SKU For technical questions, please call Page
12 Circuit Diagram SKU For technical questions, please call Page 2
DISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationSIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
SIDE-WIND, A-FRAME TRAILER JACK Model 95157 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More information6 OFF ROAD LIGHT BAR
6 OFF ROAD LIGHT BAR LOUD speaker Model 95953 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationWHEEL KIT FOR 13 HP GENERATOR
WHEEL KIT FOR 13 HP GENERATOR 94192 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationSUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS
SUBMERSIBLE PUMP Model 37952 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationFor technical questions and replacement parts, please call
Digital CLAMP MULTIMETER 42396 95652 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More information25 GALLON PORTABLE OIL LIFT
25 GALLON PORTABLE OIL LIFT Model 92859 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationWINDSHIELD REMOVAL KIT
WINDSHIELD REMOVAL KIT 94180 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationMINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892
MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by
More information1000 Lb. Motorcycle Lift
1000 Lb. Motorcycle Lift 91764 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the
More informationSUBMERSIBLE POND PUMP
SUBMERSIBLE POND PUMP 258 Gallons Per hour 47117 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More informationSUBMERSIBLE MINI-PUMP
SUBMERSIBLE MINI-PUMP Model 41287 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationELECTRIC HYDRAULIC GEAR PUMP
ELECTRIC HYDRAULIC GEAR PUMP 46169 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More information4 TIER STOCKER SERVICE CART
4 TIER STOCKER SERVICE CART 90160 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationPOWER INVERTER 1,000 WATT / 2,000 WATT PEAK
POWER INVERTER 1,000 WATT / 2,000 WATT PEAK 94009 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS
More informationPUSH BUTTON KEY CABINET
PUSH BUTTON KEY CABINET Model 95689 INSTALLATION And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationCAMBELT TENSION GAUGE
CAMBELT TENSION GAUGE Model 96557 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More information2 GALLON COOLANT PUMP
2 GALLON COOLANT PUMP Model 45333 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationflexible infrared thermometer
flexible infrared thermometer Model 94233 assembly and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationRECHARGEABLE 24 LED WORK LIGHT
RECHARGEABLE 24 LED WORK LIGHT MODEL 95181 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements; actual product may differ slightly from product described herein. 3491 Mission Oaks Blvd.
More information1250 LB. CAPACITY MECHANICAL WHEEL DOLLY
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationCompressor Duty Motor - 1 HP. Model 40132
Compressor Duty Motor - 1 HP Model 40132 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight
More informationBucket Grease Pump ASSEMBLY AND OPERATING INSTRUCTIONS
Bucket Grease Pump 9793 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More information1/2 Ton - 2 Stage Transmission Jack
1/2 Ton - 2 Stage Transmission Jack 34032 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationSquare Solar Garden Light 95706
Square Solar Garden Light 95706 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationp.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
p.t.o. Slip clutch 65517 Installation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read
More informationSPECIFICATIONS GENERAL SAFETY RULES PERSONAL SAFETY. Save This Manual TOOL USE AND CARE WORK AREA
SPECIFICATIONS 2 Forged Safety Latch Hooks Cable extends to: 44 Drop forged steel hanging bracket Heavy duty 3/16 Steel Cable Pulling Capacity: 1200 LB. One piece double ratchet gear Save This Manual You
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web site at
AIR FILTER, REGULATOR AND LUBRICATOR 40312 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2000 by Harbor Freight
More informationANALOG SOUND LEVEL METER
ANALOG SOUND LEVEL METER 92282 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools.
More informationwill result in death or serious injury. could result in death or serious injury. Indicates a hazardous situation which, if not avoided,
SAFETY SETUP OPERATION MAINTENANCE WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
More informationTable of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance
Table of Contents Safety Setup Operation Maintenance Safety... 2 Specifications... 3 Setup... 4 Operation... 5 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Diagram... 10 Warranty...
More information14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS
14.4 CORDLESS DRILL 40209 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight Tools. All
More informationHYDRAULIC SPRING COMPRESSOR SET
HYDRAULIC SPRING COMPRESSOR SET Model 47890 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More informationPOWER INVERTER 700 WATT / 1800 WATT PEAK
POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationIMPORTANT SAFETY INSTRUCTIONS
Table of Contents Safety... 2 Specifications... 3 Functions... 4 Operation... 5 Maintenance... 7 Warranty... 7 SAFETY SPECIFICATIONS OPERATION MAINTENANCE WARNING SYMBOLS AND DEFINITIONS This is the safety
More informationWelding Clips. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
Welding Clips Model 95637 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationWOODEN SIDE PANEL KIT
WOODEN SIDE PANEL KIT Model 40141 (FOR USE WITH MODEL 42709 UTILITY TRAILER) ASSEMBLY INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http//www.harborfreight.com Copyright
More informationBEARING ADAPTERS FWD/FRONT WHEEL. Model 45210
BEARING ADAPTERS FWD/FRONT WHEEL Model 45210 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationComponent Size Weight Capacity
Specifications Component Size Weight Capacity Top Shelf 72 W x 19-1/2 L 1500 lb Drawer A (x3) 37-3/8 W x 19-1/2 L x 2-1/4 H 154 lb each Drawer B 37-3/8 W x 19-1/2 L x 5-1/4 H 220 lb Drawer C 37-3/8 W x
More information2-1/4 Gallon Sprayer
2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More information1200W Paint DRYING Lamp
1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationAIR COMPRESSOR 2 HP - 8 GALLON
AIR COMPRESSOR 2 HP - 8 GALLON 40400 ASSEMBLY & OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationPOLISHER KIT Model 95030
3 PNEUMATIC POLISHER KIT Model 95030 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationSEALER-15-1/2 ELECTRICAL IMPULSE
SEALER-5-/ ELECTRICAL IMPULSE OPERATING INSTRUCTIONS 39 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 000 by Harbor Freight Tools. All rights reserved.
More informationIMPORTANT SAFETY INFORMATION
Specifications Tricycle Height 26 Front Wheel 5/8 Axle Diameter, 13 Pneumatic Knobby Tire Back Wheels 5/8 Axle Diameter, 10 Pneumatic Knobby Tire Age Range 5 and up Weight Capacity 150 lb. IMPORTANT SAFETY
More informationMOUNTABLE WALL SINK ASSEMBLY AND OPERATING INSTRUCTIONS
MOUNTABLE WALL SINK 90326 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools. All
More informationPISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA 93011
g ordon PISTOL SHAPE SPOTLIGHT 500,000 CANDLE POWER 4603 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Copyright 200 by Harbor Freight Tools. All rights reserved. No portion
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationInstallation Precautions. Use Precautions. Specifications
Important Safety Information Safety Setup Operation Maintenance Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationSwing Arm Magnifying Lamp
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More information2 PIECE SOLAR LIGHT SET 93886
PIECE SOLAR LIGHT SET 93886 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationSwing Back Trailer Jack
Swing Back Trailer Jack Model: 91474 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationOPERATING INSTRUCTIONS
8 FUNCTION DIGITAL MULTIMETER 90939 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights
More informationSTEEL SIDE PANEL KIT. Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER)
STEEL SIDE PANEL KIT Model 47423 (FOR USE WITH MODEL 42709 FOLDABLE UTILITY TRAILER) Set up and Operating Instructions (MODEL 42709 TRAILER and TARP NOT INCLUDED. TARP SOLD SEPARATELY. Shown for illustration
More informationMINI AIR ANGLE DIE GRINDER
MINI AIR ANGLE DIE GRINDER Model 33171 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationTURTLE SOLAR LIGHT 94412
TURTLE SOLAR LIGHT 92 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 39 Mission Oaks Blvd., Camarillo, CA 930 Visit
More informationRio color changing solar light
Rio color changing solar light Model 95850 Assembly and operation instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationMOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:
MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY Model 94813 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure
More information4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:
4 AIR ANGLE GRINDER Model 95504 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011
SPARK PLUG CLEANER ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More information360 Watt Charge Controller
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationPropane torch. Model Assembly And Operation Instructions
Propane torch Model 39953 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
More information4 in 1 POWER STATION Model: 7226
Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product. Observe all safety information to protect yourself and others. Failure to observe
More informationELECTRIC LONG SHAFT DIE GRINDER 44141
ELECTRIC LONG SHAFT DIE GRINDER 44141 ASSEMBLY and OPERATING INSTRUCTIONS 1/4 Collet Accepts Most Popular Die Grinding Accessories Diagrams within this manual may not be drawn proportionally. Due to continuing
More informationANGLE DIE GRINDER KIT
ANGLE DIE GRINDER KIT Model 93157 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More information3 PC. SOLAR GARDEN LIGHT SET 92686
3 PC. SOLAR GARDEN LIGHT SET 92686 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More informationManual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
More informationIMPORTANT SAFETY INFORMATION
Specifications Overall Dimensions Batteries 9" L x 6-3/4" W x 6-3/4" H 4 - AA (sold separately) IMPORTANT SAFETY INFORMATION Installation Precautions 1. Verify that installation surface has no hidden utility
More informationAutomatic Emergency Light
Automatic Emergency Light Item 38013 Read this material before using this product. Failure to do so can result in serious injury. Save this manual. When unpacking, make sure that the product is intact
More informationSPOTLIGHT 30 MILLION CANDLEPOWER
SPOTLIGHT 30 MILLION CANDLEPOWER 93175 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight
More informationSpecifications. Important Safety Information
Specifications Gauge Range 0-30 IN. of mercury (in Hg) 0-760 torr Important Safety Information WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow instructions listed below may result in serious
More informationBATTERY ISOLATOR. Model 93801: 70 Amp Model 93802: 90 Amp
BATTERY ISOLATOR Model 93801: 70 Amp Model 93802: 90 Amp Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationBATTERY CHARGER WITH LCD DISPLAY
BATTERY CHARGER WITH LCD DISPLAY 65834 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationSolar mosquito killer
Solar mosquito killer Model 96415 Assembly And Operation Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More informationPROPANE TORCH WITH TURBO BURNER
PROPANE TORCH WITH TURBO BURNER MODEL 91894 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,
More informationAluminum Plus Low Profile Service Jack
Aluminum Plus Low Profile Service Jack Operating Instructions & Parts Manual Model Number ATD7344 ATD7345 Capacity 1.5 Ton 2.5 Ton Model ATD7344 Model ATD7345! This is the safety alert symbol. It is used
More information2 line price marking gun
2 line price marking gun Model 95878 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationrechargeable umbrella light
rechargeable umbrella light Model 98154 assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More information4 color Solar light. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
4 color Solar light Model 95665 Setup And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor
More informationUTILITY WAGON WITH 1000 LB. CAPACITY
UTILITY WAGON WITH 1000 LB. CAPACITY 94908 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationTWIN HALOGEN SHOP LIGHT
TWIN HALOGEN SHOP LIGHT 36787 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More informationBATTERY OPERATED BI-PLANE
BATTERY OPERATED BI-PLANE 91311 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Website at www.harborfreight.com IMPORTANT: If damage is caused due to a crash,
More informationEIGHT GALLON PSI AIR COMPRESSOR
EIGHT GALLON - 115 PSI AIR COMPRESSOR Model 95370 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission
More informationIMPORTANT SAFETY INFORMATION
Specifications Outer Dimensions Inner Dimensions Lockbox Inner Dimensions Panel Features Includes 21 W x 15 D x 59 H 20-1/2 W x 12 D x 49-1/2 H 20-1/2 W x 11 D x 7-5/8 H Dual Security System for Keyed
More informationALUMINUM JACK. 3,000 lb. Jack Capacity & JACK STAND COMBO. Model ASSEMBLY AND OPERATING INSTRUCTIONS
ALUMINUM JACK 3,000 lb. Jack Capacity & JACK STAND COMBO 6,000 lb. Jack Stand Capacity (when used in pairs) Model 91850 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011
More information4 in 1 solar bird bath
4 in 1 solar bird bath 66557 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com
More informationModel Due to continuing improvements, actual product may differ slightly from the product described herein.
12 volt Oooga horn Model 96291 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationSUBMERSIBLE DIRTY WATER PUMP
SUBMERSIBLE DIRTY WATER PUMP Model 93819-1 HP Model - 1.2 HP ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationOPERATING INSTRUCTIONS. Note: 6V Charging. Requires Manual Shut Off.
Requires Manual Shut Off. 6 / 2 AMP,, DUAL RATE BATTER TTERY CHARGER 45005 OPERATING INSTRUCTIONS E224783 E224783 Note: 6V Charging Due to continuing improvements, actual product may differ slightly from
More informationCHIPPER/SHREDDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS
CHIPPER/SHREDDER Model 95091 ASSEMBLY AND OPERATING INSTRUCTIONS Do to continuing improvements, actual product may differ slighlty from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationPNEUMATIC GARDEN STOOL
PNEUMATIC GARDEN STOOL 90473 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com 3 THANK YOU for choosing a HARBOR FREIGHT TOOLS product.
More informationA/C Manifold Gauge Set
A/C Manifold Gauge Set Stock Number W89730 OWNER'S MANUAL : USE ONLY R-134A REFRIGERANT WITH THE A/C MANIFOLD GAUGE SET TO PREVENT EXPLOSION, SERIOUS IN- JURY, AND DEATH: Service of air conditioning systems
More informationELECTRIC PORTABLE PIPE THREADER. Model ASSEMBLY AND OPERATING INSTRUCTIONS
ELECTRIC PORTABLE PIPE THREADER Model 93880 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationOPERATION MANUAL FOR BRAKE FLUID EXCHANGER
PRODUCT AND COMPANY IDENTIFICATION Product Name: Brake Fluid Exchanger GS-432 Product Use: Brake fluid exchanger Date of issue : 27.05.2012 Revision Date : 05.09.2013 Company Information: Sudheimer Car
More information