40 Series - Miniature PCB relays A. Features
|
|
- August Horn
- 5 years ago
- Views:
Transcription
1 1. = = = Series - Miniature PCB relays A Features & 2 Pole relay range Pole 10 A (3. mm pin pitch) Pole 10 A ( mm pin pitch) Pole 8 A ( mm pin pitch) PCB mount - direct or via PCB socket 3 mm rail mount - via screw and screwless sockets DC coils (standard or sensitive) & AC coils Cadmium Free contact material 8 mm, 6 kv (1.2/0 µs) isolation, coil-contacts UL Listing (certain relay/socket combinations) Flux proof: RT II standard, (RT III option) 9 series sockets Coil EMC suppression Timer accessories 86 series 3. mm contact pin pitch 1 Pole 10 A PCB or 9 series sockets mm contact pin pitch 1 Pole 10 A PCB or 9 series sockets mm contact pin pitch 2 Pole 8 A PCB or 9 series sockets = 7. = 7. = FOR UL HORSEPOWER AND PILOT DUTY RATINGS SEE General technical information page V Copper side view Copper side view Copper side view Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load AC1 VA Rated load AC1 (230 V AC) VA Single phase motor rating (230 V AC) kw Breaking capacity DC1: 30/0/2 V A Minimum switching load mw (V/mA) Standard contact material Coil specification Nominal voltage (U N ) V AC (0/60 Hz) V DC Rated power AC/DC/sens. DC VA (0 Hz)/W/W Operating range AC DC/sens. DC Holding voltage AC/DC Must drop-out voltage AC/DC Mechanical life AC/DC cycles Electrical life at rated load AC1 cycles Operate/release time ms Insulation between coil and contacts (1.2/0 µs) kv Dielectric strength between open contacts V AC Ambient temperature range C Environmental protection (according to type) 1 CO (SPDT) 1 CO (SPDT) 2 CO (DPDT) 10/ 10/ 8/1 20/400 20/400 20/400 2,00 2,00 2, /0.3/ /0.3/0.12 8/0.3/ (/) 300 (/) 300 (/) AgNi AgNi AgNi /0.6/0. 1.2/0.6/0. 1.2/0.6/0. ( )U N ( )U N ( )U N ( )U N /( )U N ( )U N /( )U N ( )U N /( )U N 0.8 U N /0.4 U N 0.8 U N /0.4 U N 0.8 U N /0.4 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N / / / /3 - (12/4 sensitive) 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive) 6 (8 mm) 6 (8 mm) 6 (8 mm) 1,000 1,000 1, RT II** RT II** RT II** ** See general technical information Guidelines for automatic flow solder processes page II. 1
2 1. = Series - Miniature PCB relays A Features xx Pole 16 A ( mm pin pitch) 40.xx.6 - Bistable versions of the 40.31, 40.1, 40.2 & relays PCB mount - direct or via PCB socket 3 mm rail mount - via screw and screwless sockets DC coils & AC coils Cadmium Free option available 8 mm, 6 kv (1.2/0 µs) isolation, coil-contacts UL Listing (certain relay/socket combinations) Flux proof: RT II standard, (RT III option) 9 series sockets Coil EMC suppression Timer accessories 86 series mm contact pin pitch 1 Pole 16 A PCB or 9 series sockets Bistable (single coil) versions of 40.31/1/2/61 PCB or 9 series sockets Bistable version (1 coil) types: = For wiring diagrams see page FOR UL HORSEPOWER AND PILOT DUTY RATINGS SEE General technical information page V Copper side view Contact specification Contact configuration Rated current/maximum peak current Rated voltage/maximum switching voltage V AC Rated load AC1 Rated load AC1 (230 V AC) Single phase motor rating (230 V AC) Breaking capacity DC1: 30/0/2 V A VA VA kw Minimum switching load mw (V/mA) Standard contact material Coil specification Nominal voltage (U N ) V AC (0/60 Hz) V DC Rated power AC/DC/sens. DC VA (0 Hz)/W/W Operating range Holding voltage Must drop-out voltage Mechanical life AC/DC Electrical life at rated load AC1 Operate/release time A AC DC/sens. DC AC/DC AC/DC cycles cycles ms Insulation between coil and contacts (1.2/0 µs) kv Dielectric strength between open contacts V AC Ambient temperature range C Environmental protection (according to type) 1 CO (SPDT) 16/30* 20/400 See relays 4, /0.3/ (10/) AgCdO ***See table /0.6/0. 1.0/1.0/ ( )U N ( )U N ( )U N /(0.8 1.)U N ( )U N / 0.8 U N /0.4 U N 0.2 U N /0.1 U N / 10 6 See relays /3 - (12/4 sensitive) (8 mm) , Min. impulse duration RT II** ms * With the AgSnO 2 material the maximum peak current is 1 A - ms on normally open contact. *** Nominal voltage (U N ): V DC 2 ** See general technical information Guidelines for automatic flow solder processes page II.
3 1. = Series - Miniature PCB relays A Features Pole relay range Pole 10 A (Flat pack) Pole 16 A (Flat pack) Pole 10 A (Vertical) PCB mount - direct or via PCB socket (40.41 version) DC coils Cadmium Free option available 8 mm, 6 kv (1.2/0 µs) isolation, coil-contacts NO version available Pole 10 A Flat pack PCB mount 1 Pole 16 A Flat pack PCB mount 1 Pole 10 A Vertical PCB or 9 series socket Contact specification FOR UL HORSEPOWER AND PILOT DUTY RATINGS SEE General technical information page V Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage V AC Rated load AC1 VA Rated load AC1 (230 V AC) VA Single phase motor rating (230 V AC) kw Breaking capacity DC1: 30/0/2 V A Minimum switching load mw (V/mA) Standard contact material Coil specification Nominal voltage (U N ) V AC (0/60 Hz) V DC Rated power AC/DC/sens. DC VA (0 Hz)/W/W Operating range AC DC/sens. DC Holding voltage AC/DC Must drop-out voltage AC/DC Mechanical life AC/DC cycles Electrical life at rated load AC1 cycles Operate/release time ms Insulation between coil and contacts (1.2/0 µs) kv Dielectric strength between open contacts V AC Ambient temperature range C Environmental protection (according to type) Copper side view Copper side view Copper side view 1 CO (SPDT) 1 CO (SPDT) 1 CO (SPDT) 10/ 16/30 10/ 20/400 20/400 20/400 2,00 4,000 2, /0.3/ /0.3/ /0.3/ (/) 00 (10/) 300 (/) AgCdO AgCdO AgCdO / /0. / /0. / /0. /( )U N /( )U N /( )U N /0.4 U N /0.4 U N /0.4 U N /0.1 U N /0.1 U N /0.1 U N 28. / 10 6 / 10 6 / /4 12/4 12/4 6 (8 mm) 6 (8 mm) 6 (8 mm) 1,000 1,000 1, RT I RT I RT I = 3
4 40 Series - Miniature PCB relays A Ordering information Example: 40 series PCB relay, 2 CO (DPDT), 230 V AC coil. A B C D Series Type 1 = PCB - 3. mm pinning, flat 3 = PCB - 3. mm pinning 4 = PCB - 3. mm pinning = PCB - mm pinning 6 = PCB - mm pinning No. of poles 1 = 1 pole for: 40., 10 A/16 A 40.31, 10 A 40.41, 10 A 40.1, 10 A 40.61, 16 A 2 = 2 pole for: 40.2, 8 A Coil version 6 = AC/DC bistable 7 = Sensitive DC 8 = AC (0/60 Hz) 9 = DC Coil voltage See coil specifications A: Contact material 0 = Standard AgNi for 40.31/1/2, AgCdO for = AgCdO (standard for 40./41) 4 = AgSnO 2 = AgNi + Au ( µm) B: Contact circuit 0 = CO (npdt) 3 = NO (npst) D: Special versions 0 = Standard 1 = Wash tight (RT III) 3 = High temperature (+ 12 C) wash tight C: Options 0 = None 16 = With rated current 16 A (for 40.) Selecting features and options: only combinations in the same row are possible. Preferred selections for best avaliability are shown in bold. Type Coil version A B C D 40. sensitive DC sensitive DC / sensitive DC /1 AC-sens. DC /1 DC AC-sens. DC DC AC-sens. DC DC /1/ bistable /61 4
5 40 Series - Miniature PCB relays A Insulation according to EN :04 1 pole 2 pole Nominal voltage of supply system V AC 230/ /400 Rated insulation voltage V AC Pollution degree Insulation between coil and contact set Type of insulation Reinforced (8 mm) Reinforced (8 mm) Overvoltage category III III Rated impulse voltage kv (1.2/0 µs) 6 6 Dielectric strength V AC 4,000 4,000 Insulation between adjacent contacts Type of insulation Basic Overvoltage category II Rated impulse voltage kv (1.2/0 µs) 2. Dielectric strength V AC 2,000 Insulation between open contacts Type of disconnection Micro-disconnection Micro-disconnection Dielectric strength V AC/kV (1.2/0 µs) 1,000/1. 1,000/1. Conducted disturbance immunity Burst (...0)ns, khz, on - EN level 4 (4 kv) Surge (1.2/0 µs) on - (differential mode) EN level 3 (2 kv) Other data Bounce time: NO/NC ms 2/ Vibration resistance ( )Hz: NO/NC g 10/4 (1 changeover) 1/3 (2 changeover) Shock resistance g 13 Power lost to the environment without contact current W 0.6 with rated current W 1.2 (40./31/41/1) 2 (40.61/2/40.-16) Recommended distance between relays mounted on PCB mm
6 40 Series - Miniature PCB relays A Contact specification F 40 - Electrical life (AC) v contact current Types 40.31/1/ F 40 - Electrical life (AC) v contact current Type Cycles 10 6 Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 Cycles 10 6 Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 limit for 40.31/ (A) (A) F 40 - Electrical life (AC) v contact current Types 40./41 H 40 - Maximum DC1 breaking capacity Cycles Resistive load - cosϕ = 1 Inductive load - cosϕ = limit for version 10 A (A) DC breaking current (A) current limit 40./31/41/1 current limit 40.2 current limit single contact contacts in series DC voltage (V) When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of can be expected. In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 6
7 40 Series - Miniature PCB relays A Coil specifications DC coil data W standard (types 40.31/1/2/61) DC coil data - 0. W sensitive (types 40.31/1/2/61) Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min U max R I at U N V V V Ω ma , , , , , , ,00.3 Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min * U max ** R I at U N V V V Ω ma , , , , , , , , *U min = 0.8 U N for **U max = 1. U N for DC coil data - 0. W sensitive (types 40./41) Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min U max* R I at U N V V V Ω ma , , ,0 8.3 *U max = 1. U N for AC coil data (types 40.31/1/2/61) Nominal Coil Operating range Resistance Rated coil voltage code consumption U N U min U max R I at U N (0Hz) V V V Ω ma , , , , , , AC/DC coil data - bistable (types 40.31/1/2/61) Nominal Coil Operating range Resistance Rated coil DC: Release voltage code consumption resistance** U N U min U max R I at U N R DC V V V Ω ma Ω , , , ,00 ** R DC = Resistance in DC, R AC = 1.3 x R DC 1W 7
8 40 Series - Miniature PCB relays A Coil specifications R 40 - DC coil operating range v ambient temperature Standard coil R 40 - DC coil operating range v ambient temperature Sensitive coil, types 40.31/1/2/61 U U N U U N /1/ ( C) /1/ ( C) R 40 - DC coil operating range v ambient temperature Sensitive coil, types 40./41 R 40 - AC coil operating range v ambient temperature U U N /41 U U N ( C) ( C) 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. Wiring diagram for 40 series bistable coil version AC Operation DC Operation R AC ~ 1.3 R DC D = 1N4007 set D set reset reset V DC R DC V AC R AC On momentary closure of the SET switch the relay is magnetised through the diode and the relay contacts transfer to the set position and remain in this position. On momentary closure of the RESET switch the relay is demagnetised through limiting resistor (R AC ) and the contacts return to the reset position. Notes: On momentary closure of the SET switch the relay is magnetised and the relay contacts transfer to the set position and remain in this position. On momentary closure of the RESET switch the relay is demagnetised through limiting resistor (R DC ) and the contacts return to the reset position. The minimum SET or RESET impulse time is ms. The maximum time can be continuous. In practice, always ensure that the SET and RESET contacts cannot be operated simultaneously. 8
9 9 Series - Socket overview for 40 series relays 9.0 See page 10 Module Socket Relay Description Mounting Accessories Screw terminal (Box clamp) socket Panel or 3 mm rail - Coil indication and EMC Top terminals - Contacts (EN 0022) mount suppression modules Bottom terminals - Coil - Jumper link Timer modules - Plastic retaining and release clip Module Socket Relay Description Mounting Accessories Screw terminal (Box clamp) socket Panel or 3 mm rail - Coil indication and EMC wiring: (EN 0022) mount suppression modules Top terminals - Contacts - Jumper link Bottom terminals - Coil - Plastic retaining and release clip See page Module Socket Relay Description Mounting Accessories Screw terminal (Box clamp) socket Panel or 3 mm rail - Coil indication and EMC Top terminals - Contacts (EN 0022) mount suppression modules Bottom terminals - Coil - Jumper link Plastic retaining and release clip See page Module Socket Relay Description Mounting Accessories Screwless terminal socket Panel or 3 mm rail - Coil indication and EMC For fast cable connections (EN 0022) mount suppression modules Top terminals - Contacts - Timer modules - Bottom terminals - Coil - Plastic retaining and release clip See page Module Socket Relay Description Mounting Accessories Screwless terminal socket Panel or 3 mm rail - Coil indication and EMC 40.2 For fast cable connections (EN 0022) mount suppression modules Top terminals - Contacts - Plastic retaining and release clip - Bottom terminals - Coil See page 14 See page Module Socket Relay Description Mounting Accessories PCB socket PCB mounting - Metal retaining clip Plastic retaining clip Top terminals Bottom terminals 9
10 9 Series - Sockets and accessories for 40 series relays Certain relay/socket combinations Screw terminal (Box clamp) socket panel or 3 mm rail mount 9.03 (blue) (black) 9.0 (blue) (black) For relay type , 40.2, Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Identification tag Modules (see table below) Timer modules (see table below) Sheet of marker tags for retaining and release clip plastic, 72 tags, 6x12 mm Rated values 10 A - 20 V * Insulation 6 kv (1.2/0 µs) between coil and contacts Protection category IP Ambient temperature C Screw torque Nm 0. Wire strip length mm 8 Max. wire size for 9.03 and 9.0 sockets solid wire stranded wire mm 2 1x6 / 2x2. 1x4 / 2x2. AWG 1x10 / 2x14 1x12 / 2x14 * For currents >10 A, contact terminals must be connected in parallel (21 with, 24 with 14, 22 with 12). With the relay 40.1 the change-over contact will be COM 21 COM NO NC NO NC = = COIL COIL way jumper link for 9.03 and 9.0 sockets (blue) (black) Rated values 10 A - 20 V series timer modules (12 24)V AC/DC; Bi-function: AI, DI; (0.0s 100h) ( )V AC; Bi-function: AI, DI; (0.0s 100h) DC Modules with non-standard polarity (+) on request coil indication and EMC suppression modules for 9.03 and 9.0 sockets Diode (+, standard polarity) (6...2)V DC LED (6...24)V DC/AC LED ( )V DC/AC LED ( )V DC/AC LED + Diode (+, standard polarity) (6...24)V DC LED + Diode (+, standard polarity) ( )V DC LED + Diode (+, standard polarity) (0...2)V DC LED + Varistor (6...24)V DC/AC LED + Varistor ( )V DC/AC LED + Varistor ( )V DC/AC RC circuit (6...24)V DC/AC RC circuit ( )V DC/AC RC circuit ( )V DC/AC Residual current by-pass ( )V AC
11 9 Series - Sockets and accessories for 40 series relays Screw terminal (Box clamp) socket panel or 3 mm rail mount (blue) (black) (blue) (black) For relay type , 40.2, Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Identification tag Modules (see table below) Sheet of marker tags for retaining and release clip plastic, 72 tags, 6x12 mm Rated values 10 A - 20 V * Insulation 6 kv (1.2/0 µs) between coil and contacts ( only) Protection category IP Ambient temperature C Screw torque Nm 0. Wire strip length mm 7 Max. wire size for and sockets solid wire stranded wire m 2 1x6 / 2x2. 1x4 / 2x2. AWG 1x10 / 2x14 1x12 / 2x14 * For currents >10 A, contact terminals must be connected in parallel (21 with, 24 with 14, 22 with 12). With the relay 40.1 the change-over contact will be COM 12 NC 21 COM 14 NO NO COIL 41 COIL NC way jumper link for and sockets (blue) (black) Rated values 10 A - 20 V *Modules in Black housing are available on request. Green LED is standard. Red LED available on request coil indication and EMC suppression modules for and sockets Blue* Diode (+, standard polarity) (6...2)V DC LED (6...24)V DC/AC LED ( )V DC/AC LED ( )V DC/AC LED + Diode (+, standard polarity) (6...24)V DC LED + Diode (+, standard polarity) ( )V DC LED + Diode (+, standard polarity) (0...2)V DC LED + Varistor (6...24)V DC/AC LED + Varistor ( )V DC/AC LED + Varistor ( )V DC/AC RC circuit (6...24)V DC/AC RC circuit ( )V DC/AC RC circuit ( )V DC/AC Residual current by-pass ( )V AC
12 9 Series - Sockets and accessories for 40 series relays Screw (Box clamp) terminal socket panel or 3 mm rail mount (blue) (black) (blue) (black) For relay type , 40.2, Accessories Metal retaining clip Plastic retaining and release clip way jumper link Identification tag Modules (see table below) Sheet of marker tags for retaining and release clip plastic, 72 tags, 6x12 mm Rated values 10 A - 20 V * Insulation 6 kv (1.2/0 µs) between coil and contacts Protection category IP Ambient temperature C Screw torque Nm 0. Wire strip length mm 8 Max. wire size for and sockets solid wire stranded wire m 2 1x6 / 2x2. 1x4 / 2x2. AWG 1x10 / 2x14 1x12 / 2x14 * For currents >10 A, contact terminals must be connected in parallel (21 with, 24 with 14, 22 with 12). With the relay 40.1 the change-over contact will be COM 21 COM 14 NO NO 12 NC NC COIL 32.6 COIL way jumper link for and sockets (blue) (black) Rated values 10 A - 20 V *Modules in Black housing are available on request. Green LED is standard. Red LED available on request coil indication and EMC suppression modules for and sockets Blue* Diode (+, standard polarity) (6...2)V DC LED (6...24)V DC/AC LED ( )V DC/AC LED ( )V DC/AC LED + Diode (+, standard polarity) (6...24)V DC LED + Diode (+, standard polarity) ( )V DC LED + Diode (+, standard polarity) (0...2)V DC LED + Varistor (6...24)V DC/AC LED + Varistor ( )V DC/AC LED + Varistor ( )V DC/AC RC circuit (6...24)V DC/AC RC circuit ( )V DC/AC RC circuit ( )V DC/AC Residual current by-pass ( )V AC
13 9 Series - Sockets and accessories for 40 series relays Screwless terminal socket panel or 3 mm rail mount 9. (blue) 9..0 (black) For relay type 40.1, 40.2, Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) Modules (see table below) Timer modules (see table below) Sheet of marker tags for retaining and release clip plastic, 72 tags, 6x12 mm Rated values 10 A - 20 V * Insulation 6 kv (1.2/0 µs) between coil and contacts Protection category IP Ambient temperature C Wire strip length mm 8 Max. wire size for 9. socket solid wire stranded wire mm 2 2x( ) 2x( ) AWG 2x( ) 2x( ) * For currents >10 A, contact terminals must be connected in parallel (21 with, 24 with 14, 22 with 12). With the relay 40.1 the change-over contact will be COM 21 COM NO NC COIL NO NC COIL series timer modules (12 24)V AC/DC; Bi-function: AI, DI; (0.0s 100h) ( )V AC; Bi-function: AI, DI; (0.0s 100h) DC Modules with non-standard polarity (+) on request coil indication and EMC suppression modules for 9. socket Diode (+, standard polarity) (6...2)V DC LED (6...24)V DC/AC LED ( )V DC/AC LED ( )V DC/AC LED + Diode (+, standard polarity) (6...24)V DC LED + Diode (+, standard polarity) ( )V DC LED + Diode (+, standard polarity) (0...2)V DC LED + Varistor (6...24)V DC/AC LED + Varistor ( )V DC/AC LED + Varistor ( )V DC/AC RC circuit (6...24)V DC/AC RC circuit ( )V DC/AC RC circuit ( )V DC/AC Residual current by-pass ( )V AC
14 9 Series - Sockets and accessories for 40 series relays Screwless terminal socket panel or 3 mm rail mount 9..3 (blue) (black) For relay type 40.1, 40.2, Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) Modules (see table below) Sheet of marker tags for retaining and release clip plastic, 72 tags, 6x12 mm Rated values 10 A - 20 V * Insulation 6 kv (1.2/0 µs) between coil and contacts Protection category IP Ambient temperature C Wire strip length mm 8 Max. wire size for 9..3 socket solid wire stranded wire mm 2 2x( ) 2x( ) AWG 2x( ) 2x( ) * For currents >10 A, contact terminals must be connected in parallel (21 with, 24 with 14, 22 with 12). With the relay 40.1 the change-over contact will be COM NO 21 COM NC COIL NO 22 NC COIL *Modules in Black housing are available on request. Green LED is standard. Red LED available on request coil indication and EMC suppression modules for 9..3 socket Blue* Diode (+, standard polarity) (6...2)V DC LED (6...24)V DC/AC LED ( )V DC/AC LED ( )V DC/AC LED + Diode (+, standard polarity) (6...24)V DC LED + Diode (+, standard polarity) ( )V DC LED + Diode (+, standard polarity) (0...2)V DC LED + Varistor (6...24)V DC/AC LED + Varistor ( )V DC/AC LED + Varistor ( )V DC/AC RC circuit (6...24)V DC/AC RC circuit ( )V DC/AC RC circuit ( )V DC/AC Residual current by-pass ( )V AC
15 9 Series - Sockets and accessories for 40 series relays PCB socket (blue) (black) (blue) 9.1. (black) For relay type 40.31, , 40.2, Accessories Metal retaining clip (supplied with socket - packaging code SMA) 09.1 Plastic retaining clip 09.2 Rated values 10 A - 20 V * Insulation 6 kv (1.2/0 µs) between coil and contacts Protection category IP Ambient temperature C * For currents >10 A, contact terminals must be connected in parallel (21 with, 24 with 14, 22 with 12). With the relay 40.1 the change-over contact will be Ø Ø (21) (21) Copper side view (22) (24) Copper side view (21) Packaging codes How to code and identify retaining clip and packaging options for sockets. Example: 9. 0 S P A A Standard packaging SM Metal retaining clip SP Plastic retaining clip 9. 0 Without retaining clip 1
16
5 mm contact pin pitch PCB or 95 series sockets
1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A 55 Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationCO (DPDT) 16/25 250/ /440 2,000 4, /0.5/ /0.5/ (5/5) 300 (5/5) AgNi
46 Series - Miniature industrial relays 8-16 A Features 46.52 46.61 1 & 2 Pole relay range 46.52-2 Pole 8 A 46.61-1 Pole 16 A Socket mount or direct connection via Faston connectors AC coils & DC coils
More information2 pole 10 A PCB mount A1 A
Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)
More information46 and 56 Series - Relays for railway applications 8-12 A. Features 46.52T 56.32T 56.34T
46 and 56 Series - Relays for railway applications 8-12 A Features 46.52T 56.32T 56.34T Plug-in power relays: 8 A, 2 pole 12 A, 2 and 4 pole DC coils with extended range Complies with UNI CEI 11170-3 (protection
More information44 SERIES. PCB/Plug-in relays from 6 to 10 A
44 PCB/Plug-in relays from 6 to 10 44 2 CO power relays with high separation between adjacent contacts Direct PCB or socket mount Type 44.52 -- 2 CO 6 (5 mm pin pitch) Type -- 2 CO 10 (5 mm pin pitch)
More information55 Series - Miniature General Purpose Relays 5-10 A
Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:
More information2 pole, 10 A power contacts 8 pin plug-in CO (DPDT) 3 CO (3PDT) Rated current/maximum peak current
0 Series - General purpose relays - 0 Features 0. 0. Plug-in mount 0 General purpose relay & pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket
More informationGeneral purpose relays 7-10 A
55 SЕRIES General purpose relays 7-10 utomation for blinds, grilles and shutters Control and management of electric power Shipyards Road / tunnel lighting Hoists and cranes Circuit breakers and switches
More information60 Series - General purpose relays 6-10 A. Features SERIES
60 Series - General purpose relays 6-10 60 SERIES Features 60.12 60.13 Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils
More informationMiniature Industrial relay 8-16 A
46 SЕRIES Miniature Industrial relay 8-16 utomation for blinds, grilles and shutters Elevators and lifts Shipyards Road / tunnel lighting Hoists and cranes Bottling plant Control panels Panels for electrical
More information94 Series - Socket overview for 55 series relays
94 Series - Socket overview for 55 series relays 94.04 See page 7 Module Socket Relay Description Mounting 99.02 94.02 55.32 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and
More informationGeneral purpose relays 6-10 A
60 SЕRIES General purpose relays 6-10 Shipyards Hoists and cranes Road / tunnel lighting Burners, boilers and furnaces Wood-processing machines Panels for electrical distribution Control panels Control
More informationTime scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets
86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module
More informationSlim P.C.B. Relays (EMR or SSR) A
34 SЕRIES Slim P.C.B. Relays (EMR or SSR) 0.1-0.2-2 - 6 Bottling plant Packaging machines Labelling machines Road / tunnel lighting Burners, boilers and furnaces Timers and lighting controls Electronic
More information90 Series - Socket overview for 60 series relays
90 Series - Socket overview for 0 series relays See page 90 90.0 99.0 90.0 0. Screw terminal (Box clamp) socket Panel or mm rail - Coil indication and EMC 90.0 0. Double terminal (EN 00) mount suppression
More informationTime scale: from 0.05 s to 100 h Multi-function Plug-in for use with 96 series sockets. Relay + socket. Wiring diagram (without control signal)
86 Timer modules 86 Timer modules for use in conjunction with relay & socket. 86.00T - Multi-function & multi-voltage timer module 86.30T - Bi-function & multi-voltage timer module Complies with EN 45545-2:2013
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More information2 pole, 10 A AC/DC supply non polarized Plug-in for use with 94 series sockets
Miniature plug-in timers 7-10 A Plug-in timer.02-2 Pole 10 A.03-3 Pole 10 A.04-4 Pole 7 A Multifunctions Seven time scales, from 0.05 s to 100 h 94 series sockets for 35 mm rail (EN 60715) mount with push-in
More informationxxx.1xx xxx.4xx0. AgNi contacts, specifically intended for resistive and slightly inductive loads as well as for motor loads
22 Series - Modular contactors 25-40 - 63 22 SERIES Features 22.32.0.xxx.1xx0 22.32.0.xxx.4xx0 25 modular contactor - 2 pole 17.5 mm wide NO contact gap 3 mm, double break Continuous duty for the coil
More informationRUC industrial relays of small dimensions
RUC 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current
More informationPluggable interface relays RT, PT and MT range
Content Pluggable interface relays RT, PT, MT Benefits and advantages, approvals... 190 Ordering details... 191 Technical data... 194 Circuit diagrams... 19 Dimensional drawings... 19 189 Benefits and
More informationContact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage
35 Royal Road Flemington, NJ 08822-6000 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage R ated load Min. switching current Max. inrush current
More informationV REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.
Accessories Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5mm / 5mm; relay height 15.7 mm n New retainer clip with ejection function n Easy replacement of relays on a densely packed
More informationMiniature Relay PT 2 pole 12 A, 3 pole 10 A or 4 pole 6 A DC- or AC-coil
2, 3 or 4 C/O contacts Switching performance up to 3000 VA Relay height 29 mm Cadmium-free contact material Mechanical indicator Manual test tab, optionally lockable. White marking tabs Applications Universal
More informationGeneral Purpose Relays Accessories. Accessories Industrial Power Relay RT
Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5 mm / 5 mm; n New retainer clip with ejection function n Easy replacement of relays on a densely packed DIN rail n No reduction of
More informationFINDER RELAYS & MODULAR TIMERS IN STOCK AT MARSH ELECTRONICS
Finder relays, modular timers and accessories in stock at FINDER RELAYS & MODULAR TIMERS IN STOCK AT MARSH ELECTRONICS Finder Relay has hundreds of possible combinations of relays and modular timers. Those
More informationSeries 858, Relay Sockets with Industrial Relay
Series 858, Relay Sockets with Industrial Relay voltage: V DC 4 changeover contacts voltage: V DC 4 changeover contacts (gold contacts) * In order to prevent the gold layer from being damaged, these values
More informationIndustrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
More informationGeneral Purpose Low Power PCB Relays
Power PCB Relay RT2 DC and AC (for global markets) n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature up to 85 C n
More informationGeneral Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
More informationPCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load G6C - - VDC
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
More informationMicro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
More informationOrdering Information. Text PCB Power Relay G5LE
A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms
More information1 Form A 5A small size power relay for interface
1 Form A 5A small size power relay for interface PQ RELAYS RoHS compliant Protective construction: Sealed type FEATURES 1. Compact and slim 20 mm (L) mm (W) 16 mm (H).787 inch (L).394 inch (W).630 inch
More informationMulti-function. Mono-function 1 NO (SPST-NO)
Features Range of electronic staircase timers 17.5 mm wide Time setting from 30 s to 20 min Zero crossing load switching Switch-off early warning - model 14.01 Suitable for 3 or 4 wire systems, with automatic
More informationScheda prodotto Relè Series E
Relè Miniatura All-or-Nothing relays ideally suited for any electronic appliances demanding very compact design and low power consumption. Design includes a protective dust cover and a completete range
More informationOrdering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
More informationPower PCB Relay. Type Contact material Contact form Construction Part number General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay Creepage distance of 8.0 mm (0.31 in) min. between coil and contact Dual-winding latching type available Plug-in and quick-connect terminals available High sensitivity (360 mw) and high
More informationPCB Relay. Contact form Terminal Single-side stable Single-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98 mw pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Plastic-sealed construction. Unique moving
More information881WP. Type List. Ordering Information 881 WP1-1A C - - C Basic series designation 4. C -- Contact material AgNi
Type List Terminal style WP (High power type, terminals)-.0mm pitch Contact form A (SPNO) Features Low Profile mm w/ fasten terminals. High Rating 7A 277VAC. High temperature withstand up to 2. UL/CUL
More informationGeneral Purpose Relay
General Purpose Relay Exceptionally reliable general purpose relay Long life (minimum 100,000 electrical operations) assured by silver contacts Built-in operation indicator (mechanical, LED), diode surge
More informationfunctions: --Staircase timer --Staircase timer + maintenance function --Staircase timer with early warning
14 SERES 14 SERES Multi-function electronic staircase timers 1 O 16 A 17.5 mm wide Type 14.01 --8 functions --Switch-off early warning options Type 14.71 --3 functions Time setting from 30 seconds to 20
More informationSurface mounting, flush mounting, and DIN track mounting
Solid-state Timer H3JA Economical, Compact, Plug-in Timer Time limit, ON-delay, operation with automatic resetting. DIN size (36 x 36 mm), fits standard 8-pin sockets. Wide choice of supply voltages: 24,
More informationAuxiliary contact blocks - with spring terminals Accessories
Auxiliary contact blocks - with spring terminals Accessories CA3-10S 1SBC101037F0014 Description The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. CA3
More informationRU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
More informationGeneral Purpose Relays Industrial Relays. Power Relay RM 2/3/7
Power Relay RM 2/3/7 n 2/3 pole 10/16A, 2 form C (CO) or 3 form C (CO) contacts n Switching capacity up to 6000VA n DC or AC coil n Mechanical indicator n Push-to-test button n Plug-in version, PCB terminals,
More informationGeneral Purpose Relays Accessories. Accessories Miniature Relay PT
Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n
More informationPCB Relay. Single-side stable EN60950/EN41003 PCB terminal G6S-2 G6SU-2 G6SK-2 G6S-2-Y Surface mounting. stable
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
More informationSealed type washable 1C H-1C-C 812H-1C-V 812H-1C-S (SPDT) F 812H-1C-C F 812H-1C-V F 812H-1C-S F
8H Type List 8H Terminal style Contact form Features Miniature PCB Power Relays A 2VAC. High CTI 2 material or product comply with IEC 33-1 are available. UL Insulation Class F. VDE, UL/CUL, TUV, CSA/CUS
More informationAccessories Miniature Relay PT (Continued)
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
More informationR600 & R500. Interface relays R600, R500. Phone: Fax: Web: -
R00, R500 R00 CR & R500 Range Range R00 & R500 R00 CR & R500 Range Range, R00, R500 Benefits and advantages R00 series Standard range in screw clamp or spring clamp versions Spacing : mm Wire size : 2.5
More informationType Terminal Coil Contact form Model
General Purpose Relay MK Exceptionally reliable general purpose relay. Long life (minimum 100,000 electrical operations) assured by silver contacts. Built-in operation indicator (mechanical, LED), diode
More informationZ b. General Purpose Relays PCB Relays SCHRACK. Power PCB Relay RT1
Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85 C (DC coil) n WG version: product in accordance to IEC 60335-1
More informationPCB Relay RC FCC. Ordering Information. Fully Sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment
PCB Relay Fully Sealed Relay with High Impulse Dielectric for Use in Telecommunications Equipment High sensitivity can be driven by digital circuits. Horizontal design allows use in /2-inch PCB racks.
More informationFeatures. Type List. Ordering Information S - 1A - - C - Contact Rating
Features Heavy duty A VAC, A VAC power type. AC & DC coils are both available. PCB terminals and quick terminal types. Optional for special large contact gap 3.0mm version. SPNO-ST & DPNO-ST contact configuration.
More informationPCB Relay. 2. Contact Form 2: DPDT 3. Terminal Shape None: PCB terminal F: Surface mount terminal
PCB Relay Ultracompact, Ultrasensitive DPDT Relay Compact size and low 5-mm profile. Low power consumption (140 mw for single-side stable, 100 to 300 mw for latching type) and high sensitivity. Low thermoelectromotive
More informationMiniature General Purpose Relay HY
www.industrialcontroldirect.com Tel: --00 Fax: -9-09 info@industrialcontroldirect.com Miniature General Purpose Relay HY General purpose, amp Plug in Power Relay, available in PCO, PCO and PCO Arc barriers
More informationScheda prodotto Relè Series B
Relè di Potenza All-or-Nothing Relays designed to meet high power switching applications with up to three changeover contacts, rated 4000 or 7500 VA - AC1. They are ideally suited for arduous duties where
More informationType Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed
PCB Relay G5LA A Cubic, Single-pole 1A Power Relay Economical cube relay with universal terminal footprint Conforms to VDE435, CQC UL recognized/ CSA certified. High switching power: 1A @ 5VAC Withstands
More information22AF 40AF AF 150AF 225AF 400AF 800AF
Contactors MC-Series UL508 E108780 Contactor 3 Pole Standards and Certifications UL508 IEC 60947-2 & IEC 60947-4-2 CSA C22.2 No.14 Features 8 Frame Sizes 1/2HP up to 600HP @ 480V AC Screw Terminals (Lug
More informationType List. Standard Type. High Power Type. Designation (provided with) Terminal style Contact form Contact gap
Features 8A/1 miniature PCB Power Relay. Large contact gap : 2mm/. High dielectric strength and comply with IEC 16950. Epoxy seal type and sealed flux free are both available. Design for UPS and power
More informationGeneral Purpose Relays Power Relays. T9G series, DC coil 30A PCB Relay
T9G series, DC coil 30A PCB Relay n 30A switching in NO and 20A in CO n Minimum Board space (29mm x 21.5mm) n Meets UL 508 for clearance / creepage n Meets IEC 61810-1 for reinforced insulation n Option
More informationTeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
More informationVEO. V2TF01 Art.Nr.: V2TF01P Art.Nr.: TECHNICAL DATA
P Temperature monitoring (PTC) Short-circuit monitoring Supply voltage 24-240 V AC/DC 1 normally open contact Width 22,5 mm Status indication LED U: Supply voltage LED TFailure: Temperature failure TECHNICAL
More informationApproved Standards. Ordering Information. Mini Motor Contactor J7KNA. Model Number Legend. Main contactor. Accessories. Mini Motor Contactor J7KNA 1
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
More information0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)
Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and
More informationModel Number Structure
Power Relay G7J Electromechanical Relays A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive
More informationType List. Standard Type. High Power Type
Features 8A/1 miniature PCB Power Relay. Large contact gap : 2mm/. High dielectric strength and comply with IEC 16950. Epoxy seal type and sealed flux free are both available. Design for UPS and power
More informationRUMC22F7 universal plug-in relay - Zelio RUM - 2 C/O V AC - 10 A - with LED
Characteristics universal plug-in relay - Zelio RUM - 2 C/O - 120 V AC - 10 A - with LED Product availability : Stock - Normally stocked in distribution facility Price* : 13.79 USD Main Range of product
More informationRE48AML12MW time delay relay 2 functions s..300 h V AC - 2 OC
Characteristics time delay relay 2 functions - 0.02 s..300 h - 24..240 V AC - 2 OC Complementary Product front plate size Control type Housing material Main Range of product Product or component type Electrical
More informationNSL..S 4-pole / 8-pole Contactor Relays - Spring Terminals
NSL..S 4-pole / 8-pole Contactor Relays - Spring DC Operated Description - 1-stack contactor relays: 4-pole, - 2-stack contactor relays: 8-pole, - Mechanically linked contact elements available, - Low
More informationAC 250V AC 250V AC 250V AC 250V DC 110V DC 110V DC 110V DC 110V Max. Allowable Current 15A 10A 10A 10A
Main Feature 1. 1 Pole to 4-Poles versions available with switching current at 15A (1 Pole) and 10A (2-4 Poles). 2. Printed Circuit Board Terminal, Plug-in Terminal and Flanged Case are designed for easy
More informationLoad Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
More informationAF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
More informationGeneral Purpose Relay
General Purpose Relay Arc barrier equipped High dielectric strength (2,000 VAC) Long dependable service life assured by AgCdO contacts Choose models with single or bifurcated contacts, LED indicator, diode
More informationSafety technique. Emergency Stop Module BH 5928, BI 5928
Safety technique Emergency Stop Module BH 5928, BI 5928 with time delay safemaster 0226419 Function diagram According to EU directive for machines 98/37/EG According to IEC/E 60 204, E 954-1 Safety category
More informationPCB Relay. Ordering Information. Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications G8P - - VDC
PCB Relay Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications Compact, yet capable of switching up to 30-A loads. Complies with UL873 and UL508 column A spacings (1/8 through
More information6mm and 14mm Slim Interface Relay
6mm and mm Slim Interface Relay RV8 Series 6mm Width Electromechanical Screw Terminal Solid State Spring Clamp Terminal PRODUCT DESCRIPTION IDEC 6mm and mm interface relays provide a compact solution for
More informationElectronic timers CT-E range Selection and ordering details
Selection and ordering details Characteristics 12 single function and 2 multifunction (24-240VAC/DC) Single or dual supply voltage ranges 24VAC/DC, 110-130VAC, 220-240VAC Output contacts 1c/o contact (250V
More informationOrdering Information. Text Surface-Mounting Signal Relay G6K
Surface-Mounting Relay with the World s Smallest Mounting Area and a Height of Only 5.2 mm ROHS compliant. Sub-miniature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density mounting.
More informationMiniature microswitches - Positive break
1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very
More informationRE48AML12MW time delay relay 2 functions s..300 h V AC - 2 OC
Characteristics time delay relay 2 functions - 0.02 s..300 h - 24..240 V AC - 2 OC Main Range of product Product or component type Electrical connection Discrete output type Contacts type and composition
More informationGeneral Purpose Relay
General Purpose Relay Designed small, 2- and 3-pole types break 5 A loads and 4-pole type, 3 A load High reliability, long life Ultra-high sensitivity with quick response High vibration/shock resistance
More informationCommand and signalling E 250, E 259 selection table
E 250, E 259 selection table Latching relays E250 Installation relays E259 Contacts switching on each impulse sent to the control coil. Contacts maintained in switched position only while the control coil
More informationT75S5D Product Details
T75S5D112-12 Product Details Industrial Relays (General Purpose) Converted to EU RoHS but not ELV Compliant (Statement of Compliance) T75S5D112-12 TE Internal Number: 1393223-3 Active Product Highlights:
More informationCharacteristics TeSys contactors 0 TeSys k contactors and reversing contactors
90 Characteristics TeSys contactors 0 TeSys k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 5424 Product certifications LCp
More informationAF09... AF30 3-pole Contactors up to 25 HP / 600 VAC
AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24
More informationSquare D General Purpose Relays
Square D General Purpose Relays Class 0R plug-in relays 0RS (SPDT) 0RS (DPDT) 0RS3 (3PDT) 0RS (PDT) Catalog 0 Contents Class 0R plug-in relays bbspecifications....................................................
More informationRSB1A160B7 interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A
Characteristics interface plug-in relay - Zelio RSB - 1 C/O - 24 V AC - 16 A Stock Code: Stock - Normally stocked in distribution facility Price*: 4.20 USD Complementary Shape of pin Jul 8, 2015 Main Commercial
More informationData sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
More informationPCB Relay. Ordering Information. Surface Mounting DPDT Relay G6S
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
More informationAXICOM Telecom-, Signal and RF Relays. W11 Relay V Nov. 07 Rev. C ECOC: JM10
108-98010 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
More informationFLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT
FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT NC NC RELAYS Flat type Flat type (PC board) (PC board) FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic design achieves 10.9
More informationAF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts
AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up
More informationAutomotive Relays PCB Single Relays. Micro Relay K (THT THR)
Micro Relay K (THT THR) Small power relay Limiting continuous current at 8 C Low weight Low noise operation Wave (THT) and reflow (THR/pin-in-paste) solderable versions Typical applications Door lock,
More informationASL09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp ASL09..S 3-pole Contactors - Spring DC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Low coil consumption, - Polarity on the coil
More informationApproved Standards. Ordering Information. Mini Contactor Relays 4-pole J7KNA-AR. Model Number Legend. Main contactor. Accessories
Mini Contactor Relays 4-pole J7KN-R ) Main contactor C & DC operated 4-, 6- and 8-pole versions in different configurations Positively guided contacts Screw fixing and snap fitting (35 mm DIN rail) Rated
More informationAF09... AF30 3-pole Contactors up to 20 HP / 480 VAC
AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory
More informationTX³ RCCBs 2P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More information