ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
|
|
|
- Wilfred George
- 5 years ago
- Views:
Transcription
1 ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series Includes brushless, slotless motor The ATS100 series motor-driven linear stages provide the high resolution and repeatability required for semiconductor wafer testing and fabrication, automated microscope inspection systems, and precision micromachining applications. Outstanding Construction Features ATS100 series stages are machined from a special cast aluminum alloy to provide a high strength-to-weight ratio, and long-term stability. The base is a box design that provides exceptional stiffness and stability. ATS100 series stages employ a precision-ground ball screw pre-loaded to eliminate backlash, and its nut has wipers to prevent contamination and maintain high accuracy throughout the life of the stage. High-quality, pre-loaded duplex bearings are used to eliminate axial play. All ATS100 series stages incorporate Linear Motion Guide (LMG) bearings to provide high load capability and high stiffness. The LMG design provides a compact stage with continuous carriage support over the entire travel and good cantilevered load capability. Integral wipers on the bearing trucks help ensure stage travel life. Highly accurate optical limit switches and end stops are also standard. Integral bellows-type waycovers protect the drive and bearing system from contamination. Metal surfaces are protected with an attractive clear anodized finish. Both metric (standard) and English mounting and bolt-hole patterns are available. High Accuracy The ATS100 sets the standard for precision performance in a compact package. With the HALAR option, the ATS100 is capable of submicron accuracy and an impressive repeatability of 0.3 µm. Motors and Drives Included with the ATS100 series stages are Aerotech s BMS series brushless rotary motors. This motor has all of the advantages of a brushless motor high acceleration, no brushes to wear, and lower heating yet has zero cogging for extremely smooth motion and accuracy. Aerotech manufactures a wide range of matching drives and controls to provide a fully integrated and optimized motion solution. Standard options include a precision right-angle bracket for multi-axis assembly, and vacuum preparation to 10-6 torr. 1
2 ATS100 Series SPECIFICATIONS Linear Stages ATS100 Series Basic Model ATS ATS ATS ATS Total Travel 50 mm (2 in) 100 mm (4 in) 150 mm (6 in) 200 mm (8 in) Maximum Travel Speed (1) 100 mm/s (4 in/s) Maximum Load (2) Vertical 10.0 kg (22.0 lb) Horizontal 25.0 kg (55.1 lb) Side 10.0 kg (22.0 lb) Accuracy HALAR (3) ±0.5 µm (±20 µin) ±0.5 µm (±20 µin) ±0.75 µm (±30 µin) ±1.0 µm (±40 µin) Standard ±2.0 µm (±80 µin) ±3.0 µm (±120 µin) ±5.0 µm (±200 µin) ±6.0 µm (±240 µin) Repeatability HALAR (3) ±0.3 µm (±12 µin) (Bidirectional) Standard ±0.7 µm (±30 µin) Differential HALSF 1.0 µm/25 mm (40 µin/in) Straightness and Standard 2.0 µm/25 mm (80 µin/in) Flatness Maximum Deviation HALSF ±0.5 µm (±20 µin) ±1.0 µm (±40 µin) ±1.5 µm (±60 µin) ±1.75 µm (±70 µin) Standard ±1.0 µm (±40 µin) ±2.0 µm (±80 µin) ±2.0 µm (±80 µin) ±3.0 µm (±120 µin) Pitch and Yaw 5 arc sec 8 arc sec 10 arc sec 12 arc sec Nominal Stage Less Motor 1.6 kg (3.5 lb) 1.7 kg (3.7 lb) 1.8 kg (4.0 lb) 2.0 kg (4.4 lb) Weight With Motor 2.7 kg (6.0 lb) 2.8 kg (6.2 lb) 2.9 kg (6.4 lb) 3.1 kg (6.8 lb) Construction Aluminum Body/Stage and Table; Clear Anodize Finish Notes: 1. Excessive duty cycle may impact stage accuracy. 2. Payload specifications are for single axis systems and based on ball screw and bearing life of 2500 km (100 million inches) of travel. 3. Available with Aerotech controllers. 4.Specifications are for single-axis systems, measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications. L VC and L SC Cantilevered Load Capability (ATS100) ATS100s shown in common XYZ orientation. An optional failsafe brake is available for heavy vertical loads. 2
3 Linear Stages ATS100 Series 3 ATS100 Series DIMENSIONS
![ATS100 Series HDZ1 Bracket and MP100 DIMENSIONS Linear Stages HDZ1 Bracket Basic Model HDZ1 HDZ1L Dimensions - Millimeters [Inches] Recommended For ATS100-50 thru ATS100-100 ATS100-150 thru](/docs-images/90/102006276/images/4-0.jpg "ATS100-200 A1 241.3 [9.50] B 20 303.3 [11.94] 32 Weight kg [lb] 1.39[3.05] 1.49[3.28] 12.5 [0.47] 25.0 [0.97] 75.0 [3.00] Ø3.0 Ø[ 0.15] Thru 2 Holes 36.5 [1.44] 12.5 [0.47 75.0 [3.00] ATS100 Series 25.")
![0 [0.97] 25.0 [0.97] 31.8 [1.25] 18.8 [0.74] M6 x 1 Thd Thru 1/4-20 Thd Thru (B) Holes 1.5 [0.06] 23.9 [0.94] A 12.5 [0.50] Typ Ø 6.6 Ø[ 0.28] Thru 8 Mounting Holes 100.0 [3.94] 12.5 [0.47] 58.7 [2.](/docs-images/90/102006276/images/4-1.jpg "31] 100.0 [3.94] 14.2 [0.56] 7.3 [0.28] 1.5 [0.06] 100.0 [3.94] MP100 150.0 [6.00] 63.5 [2.50] 100.0 [4.00] 82.6 [3.25] 127.0 [5.00] 63.5 [2.50] 88.9 [3.50] 177.8 [7.00] Ø6.6 Ø11.1 6.8 Dp [Ø0.")
4 ATS100 Series HDZ1 Bracket and MP100 DIMENSIONS Linear Stages HDZ1 Bracket Basic Model HDZ1 HDZ1L Dimensions - Millimeters [Inches] Recommended For ATS thru ATS ATS thru ATS A [9.50] B [11.94] 32 Weight kg [lb] 1.39[3.05] 1.49[3.28] 12.5 [0.47] 25.0 [0.97] 75.0 [3.00] Ø3.0 Ø[ 0.15] Thru 2 Holes 36.5 [1.44] 12.5 [ [3.00] ATS100 Series 25.0 [0.97] 25.0 [0.97] 31.8 [1.25] 18.8 [0.74] M6 x 1 Thd Thru 1/4-20 Thd Thru (B) Holes 1.5 [0.06] 23.9 [0.94] A 12.5 [0.50] Typ Ø 6.6 Ø[ 0.28] Thru 8 Mounting Holes [3.94] 12.5 [0.47] 58.7 [2.31] [3.94] 14.2 [0.56] 7.3 [0.28] 1.5 [0.06] [3.94] MP [6.00] 63.5 [2.50] [4.00] 82.6 [3.25] [5.00] 63.5 [2.50] 88.9 [3.50] [7.00] Ø6.6 Ø Dp [Ø0.28] Thru [Ø0.41] C'Bore X [0.28] Dp (4) Mounting Holes M6 X 1 Thd [1/4-20 Thd] 8 Holes Ø5.6 Thru [Ø0.22] 19.0 [0.75] 11.9 [0.47] Ø9.9 [Ø0.34] 7.8 Dp C'Bore X [0.31] Dp (4) Holes Dimensions - Millimeters [Inches] Basic Recommended Model For MP100 ATS100-50, -100, -150 Mtg Plate & ATS
5 ATS100 Series ORDERING INFORMATION Ordering Example ATS P -M -BMS -2 -NC Series Travel (mm) Stage Construction Drive Screw Tabletop Motor Foldback Motor Orientation Limits Coupling /VAC3 /VAC6 /STEEL -20P -M -U -NM -SM -BMS -BMS-BRK -BMS-AS -BMS-AS-BRK -BM -BM-BRK BM-AS -BM-AS-BRK -FB025 -FB025-BRK NC-9DU -NC-FLY -NO-9DU -NO-FLY -C025 -C0375 -NONE -MP100U -MP100U/VAC -MP100M -MP100M/VAC Linear Stages ATS100 Series ATS100 Series Linear Ball-Screw Stage ATS100 The ATS100 series motor-driven linear stages provide the high resolution and repeatability required for a broad array of industrial applications. ATS100 series stages employ a precision-ground ball screw, which is pre-loaded to eliminate backlash, and its nut has wipers to prevent contamination and maintain high accuracy throughout the life of the stage. High-quality, pre-loaded duplex bearings are used to eliminate axial play. ATS mm (2 in) travel stage with limits ATS mm (4 in) travel stage with limits ATS mm (6 in) travel stage with limits ATS mm (8 in) travel stage with limits Stage Construction (Optional) /VAC3 Vacuum preparation of stage to 10-3 torr /VAC6 Vacuum preparation of stage to 10-6 torr /STEEL All steel construction Drive Screw (Required) -20P 2 mm/rev precision-ground ball screw Tabletop (Required) -M Tabletop with metric dimension mounting pattern and holes; stage mounting base holes slotted for English and metric installation -U Tabletop with English dimension mounting pattern and holes; stage mounting base holes slotted for English and metric installation Motor (Required) -NM -SM -BMS -BMS-BRK -BMS-AS -BMS-AS-BRK -BM -BM-BRK -BM-AS -BM-AS-BRK No motor or encoder Stepping motor with connector and home marker pulse (50SMB2-HM/) Brushless servo motor with 2500-line encoder (BMS60-A-D25-E2500H) Brushless servo motor with 2500-line encoder and motor-mounted brake (BMS60-A-D25-E2500H-BK1) Brushless servo motor with 1000-line amplfied sine encoder (BMS60-A-D25-E1000ASH) Brushless servo motor with 1000-line amplified sine encoder and motor-mounted brake (BMS60-A-D25-E1000ASH-BK1) Brushless servo motor with connectors and 2500-line encoder (BM75-D25-E2500H) Brushless servo motor with connectors, 2500-line encoder, and motor-mounted brake (BM75-D25-E2500H-BK1) Brushless servo motor with connectors and 1000-line encoder (BM75-D25-E1000ASH) Brushless servo motor with connectors, 1000-line encoder, and motor-mounted brake (BM75-D25-E1000ASH-BK1) Foldback (Optional) -FB025 Foldback kit for 1/4" diameter shaft NEMA 23 motor -FB025-BRK Foldback kit with brake for 1/4" diameter shaft NEMA 23 motor 5
6 ATS100 Series ORDERING INFORMATION Linear Stages Motor Orientation (Required) -0 No motor -2 Bottom cable exit (optional orientation) -3 Left side cable exit (standard orientation) -4 Top cable exit (optional orientation) -5 Right side cable exit (optional orientation) -8 Right side fold-back (requires "FB" option, standard orientation) -12 Left side fold-back (requires "FB" option, optional orientation) ATS100 Series Limits (Required) -NC-9DU -NC-FLY -NO-9DU -NO-FLY Normally closed end of travel limit switches; 9-pin D connector Normally closed end of travel limit switches; flying leads Normally open end of travel limit switches; 9-pin D connector Normally open end of travel limit switches; flying leads Coupling (Required) -C in coupling -C in coupling (required for BMS100 / BM130 motor) -NONE No motor coupling Note: Coupling -NONE must be selected with all -FB options -MP100U -MP100U/VAC -MP100M -MP100M/VAC English base mounting plate VAC6 prepared English base mounting plate Metric base mounting plate VAC6 prepared metric base mounting plate Accessories (to be ordered as separate line item) ALIGNMENT-NPA Non-precision XY assembly ALIGNMENT-NPAZ Non-precision XZ or YZ assembly ALIGNMENT-PA10 XY assembly; 10 arc sec orthogonal ALIGNMENT-PA10Z XZ or YZ assembly with L-bracket; 10 arc second orthogonal ALIGNMENT-PA5 XY assembly; 5 arc sec orthogonal ALIGNMENT-PA5Z XZ or YZ assembly with L-bracket; 5 arc second orthogonal HDZ1 English right angle L-bracket (ATS thru ATS ) HDZ1U/VAC6 VAC6 prepared English right angle L-bracket (ATS thru ATS ) HDZ1M Metric right angle L-bracket (ATS thru ATS ) HDZ1M/VAC6 VAC6 prepared metric right angle L-bracket (ATS thru ATS ) HDZ1L English right angle L-bracket (ATS thru ATS ) HDZ1L/VAC6 VAC6 prepared English right angle L-bracket (ATS thru ATS ) HDZ1LM Metric right angle L-bracket (ATS thru ATS ) HDZ1LM/VAC6 VAC6 prepared metric right angle L-bracket (ATS thru ATS ) HALAR High-accuracy system linear error correction for accuracy and repeatability HALSF High-accuracy system improved straightness and flatness 6
ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series
ATS150 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
Linear Stages Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Submicron accuracy Optional
ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
Linear Stages TS100 Series TS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Includes
ATS1000 Series. Mechanical Bearing, Ball-Screw Stage. Precision-ground ball screw. Long-life linear motion guide bearing system
ATS1000 Series Mechanical Bearing, Ball-Screw Stage Precision-ground ball screw Long-life linear motion guide bearing system Low-cost high performance stage Optional bellows waycovers Optional hard cover
L VC and L SC Cantilevered Load Capability (ATS115)
Linear Stages Mechanical Bearing, Ball-Screw Stage Travels up to 600 Speeds up to 300 /s Side seal design with hard-cover Low-cost; high performance Long-life linear motion guide bearing system The ATS115
PRO225-HS (High Speed) Series
Linear Stages PRO225-HS (High Speed) Series Mechanical Bearing, Ball-Screw Stage Twelve models with travels from mm to 1500 mm More than 6X speed capability of the regular PRO series up to 1400 mm/s -seal
PRO225SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package
Linear Stages PRO2SL/SLE Series PRO2SL/SLE Series Mechanical Bearing, Ball-Screw Stage Improved second-generation design High-performance in a cost-effective package Rugged mechanical construction Optional
ECO115SL Series. Mechanical Bearing, Ball-Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design
Linear Stages Mechanical Bearing, Ball-Screw Stage High-performance in a cost-effective, economic package Rugged mechanical design Available with servomotor or stepping motor Nine models with travels from
ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system
ALS20000 Series Mechanical Bearing, Linear Motor Stage Protective metal waycover Integral cable management system Ideally suited for clean-room applications Compact, high-performance, linear motor stage
ECO165SL Series. Mechanical Bearing, Ball Screw Stage. High-performance in a cost-effective, economic package. Rugged mechanical design
Linear Stages Mechanical Bearing, Ball Screw Stage High-performance in a cost-effective, economic package Rugged mechanical design Available with servomotor or stepping motor Nine models with travels from
PRO165SL/SLE Series. Mechanical Bearing, Ball-Screw Stage. Improved second-generation design. High-performance in a cost-effective package
PRO165SL/SLE Series Mechanical Bearing, Ball-Screw Stage Improved second-generation design High-performance in a cost-effective package Rugged mechanical construction Optional linear encoder 18 models
ALS20000 Series. Mechanical Bearing, Linear Motor Stage. Protective metal waycover. Integral cable management system
ALS20000 Series Mechanical Bearing, Linear Motor Stage Protective metal waycover Integral cable management system Ideally suited for clean-room applications Compact, high-performance, linear motor stage
PRO165LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Ten models with travels from 100
PRO280LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Eight models with travels from 300
PRO225LM Series. Mechanical Bearing, Linear Motor Stage. Improved second-generation design. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Improved second-generation design Rugged mechanical construction Direct-drive linear motor for ultra-precise motion Twelve models with travels from
ECO225LM Series. Mechanical Bearing, Linear-Motor Stage. High-performance in a cost-effective, economic package. Rugged mechanical design
Linear Stages Mechanical Bearing, Linear-Motor Stage High-performance in a cost-effective, economic package Rugged mechanical design Direct-drive linear motor for precision motion Nine models with travels
PRO115LM Series. Mechanical Bearing, Linear Motor Stage. Aerotech s smallest sealed linear motor stage. Rugged mechanical construction
Linear Stages Mechanical Bearing, Linear Motor Stage Aerotech s smallest sealed linear motor stage Rugged mechanical construction High-performance in a cost-effective package Direct-drive linear motor
AGR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Enhanced speed and load capacity
AGR Series Mechanical-Bearing, Worm-Driven Rotary Stage Enhanced speed and load capacity Innovative precision worm-gear assembly (patent pending) provides outstanding accuracy and repeatability over a
ABL1500WB Series. Air Bearing, Linear Motor Stage. Wide base for large offset loads. Powerful dual linear motor drive
Air Bearing, Linear Motor Stage Wide base for large offset loads Powerful dual linear motor drive Designed for high-performance scanning and inspection Active air preload on all air-bearing surfaces The
ART300 Series. Mechanical-Bearing Rotary Stage. Continuous 360º rotary positioning
ART300 Series Mechanical-Bearing Rotary Stage Continuous 360º rotary positioning Precision worm gear drive for outstanding accuracy and repeatability High speed and load capacity Includes brushless servomotor
ABL1500 Series. Air Bearing, Linear Motor Stage. Designed for high-performance scanning and inspection. Active air preload on all air-bearing surfaces
ABL10 Series Air Bearing, Linear Motor Stage Designed for high-performance scanning and inspection Active air preload on all air-bearing surfaces Linear encoder feedback provides subnanometer resolution
ADR175/240 Series. Mechanical-Bearing Rotary Stage. Direct-drive brushless servomotor. Cog-free design for outstanding velocity stability
DR175/240 Series Mechanical-Bearing Rotary Stage Direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding error motions Direct coupled, high-accuracy rotary encoder
ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage
ATX165SL/SLE Series Mechanical-Bearing, Screw-Driven Linear Stage Travel lengths up to 250 mm with anti-creep crossed-roller bearings Optional center-mounted linear encoder for direct position feedback
AGR Series Gear-Driven Rotary Stages
AGR Series Gear-Driven Rotary Stages Enhanced speed and load capacity Large aperture addresses a wide range of applications Continuous 360 degrees rotary positioning Rotary Stages AGR Series Direct encoder
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
ABL1000 Series. Air-Bearing, Direct-Drive Linear Stage. Designed for high-performance alignment and assembly. 0.5 nm closed-loop resolution
Linear Stages Air-Bearing, irect-rive Linear Stage esigned for high-performance alignment and assembly 0.5 nm closed-loop resolution Fully preloaded air-bearing Low-noise linear amplifiers Complete noncontact
ANT130-L-ZS Series. Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages. Nanometer performance in a large travel format (35 mm to 160 mm )
ANT130-L-ZS Series Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages Nanometer performance in a large travel format (35 mm to 160 mm ) Dual-counterbalance, low-profile design High-dynamic,
APR Series High-Precision Mechanical Bearing Rotary Stage
APR Series High-Precision Mechanical Bearing Rotary Stage Accuracies to 1.5 arc second load capacity up to 2 kg Incremental or absolute encoders Large bearings provide high payload and moment load capacity
ADRS Series Mechanical-Bearing Rotary Stage
ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary
ADRS Series Mechanical-Bearing Rotary Stage
ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary
FiberGrate 2000 Series
FiberGrate 2000 Series Linear, Air Bearing Subsystem Fully preloaded air bearing Advanced Automation 3200 PCbased controller Lownoise linear amplifiers Complete noncontact design Includes granite base,
ADRT Series Rotary Stages
ADRT Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free design for outstanding velocity stability Outstanding wobble and runout Direct coupled, high-accuracy
APR Series. Direct-Drive Rotary Stage. Accuracies to 1.5 arc second. Axial load capacity up to 250 kg. Incremental or absolute encoders
APR Series Rotary Stages APR Series Direct-Drive Rotary Stage Accuracies to 1.5 arc second load capacity up to 2 kg Incremental or absolute encoders Large bearings provide high payload and moment load
ABL1000 Series SPECIFICATIONS Linear Stages ABL1000 Series
Linear Stages Air Bearing, Linear Motor Stage Designed for high-performance alignment and assembly Linear encoder feedback provides 2 nm resolution 1 nm closed-loop resolution with the Automation 3200
ALAR Series Direct Drive, Large-Aperture, Rotary Stage
ALAR Series Direct Drive, Large-Aperture, Rotary Stage 5 different aperture sizes: 100 mm, 150 mm, 200 mm, 250 mm, 325 mm Continuous or limited travel Axial load capacity up to 595 kg Rotary Stages ALAR
NLS4 SERIES LINEAR STAGE
NLS4 SERIES LINEAR STAGE The NLS4 have been designed for a variety of applications in research and other industrial areas requiring precision positioning such as in semiconductor processing, fiber optics
ARMS Series Rotary Motion Simulators
ARMS Series Rotary Motion Simulators Designed for highly accurate motion generation Velocity stability of 0.0001% over 360 Position resolution to 0.02 arc sec Payloads to 230 kg Integrated slip rings and
ABL8000 Series. Air Bearing, Linear Motor Stage. Active air preload on all air-bearing surfaces. Travel to 1 meter
Linear Stages Air earing, Linear Motor Stage Active air preload on all airbearing surfaces Travel to 1 meter Linear encoder or laser interferometer feedback High stiffness for heavy loads and excellent
ECO115SL Hardware Manual. Revision:
ECO115SL Hardware Manual Revision: 1.01.00 Global Technical Support Go to www.aerotech.com/global-technical-support for information and support about your Aerotech products. The website provides downloadable
BLM Series. Linear Motors. High output force in an 86.4 mm x 34.3 mm cross section
BLM Series Linear Motors BLM Series Linear Motors High output force in an 86.4 mm x 34.3 mm cross section Continuous force to 397.6 N (89.4 lb; peak force to 1590.4 N (357.5 lb High-energy rare-earth magnets
BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control
BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype motors with the advantage
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
105000BT & BT/CT Series
15BT & 16BT/CT Series Ball Bearing and Cross Roller Bearing Tables Designed for high accuracy and extremely smooth motion, 1 series tables are ideal for light to moderate duty cycle applications such as
POSITIONING STAGES AND SYSTEMS
POSITIONING STAGES AND SYSTEMS DEVELOPING HIGHLY ENGINEERED LINEAR POSITIONING SYSTEMS THAT IMPROVE PRECISION, INCREASE PRODUCTIVITY AND CREATE VALUE FOR CUSTOMERS Linear and Rotary Positioning Stages
Ultra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Rotary Series Rotary Series: Direct Drive Precision Stages
Rotary Series Rotary Series: Direct Drive Precision Stages Parker Bayside s Direct Drive Rotary Stages feature a robust construction and high performance in a compact package, providing smooth, near-frictionless
BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control
BMS Series Rotary Motors BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype
Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
HexGen HEX HL Hexapod Six-DOF Positioning System
HexGen HE500-350HL Hexapods and Robotics HexGen HE500-350HL Hexapod Six-DOF Positioning System Six degree-of-freedom positioning with linear travels to 110 mm and angular travels to 40 Precision design
Crossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
Screw Driven automation tables
Screw riven automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical
BLMC Series. Linear Motors. Compact size for tight space constraints; 57.2 mm x 31.8 mm cross section
BLMC Series Linear Motors Compact size for tight space constraints; 7.2 mm x 31.8 mm cross section Continuous force to 184.0 N (41.4 lb); peak force to 736.0 N (16. lb) Non-magnetic forcer coil provides
Screw Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
AXR Series Two-Axis Rotary Assembly
AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to
300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
BLMUC Series Linear Motors
BLMUC Series Linear Motors Ultra-compact size for tight space constraints; 52.0 mm x 20.8 mm cross section Continuous force to 58.0 N (13.0 lb); peak force to 231.8 N (52.1 lb) Non-magnetic forcer coil
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
LaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform
LaserTurn 1 Laser Machining System Highly integrated linear/rotary motion platform Pneumatically-actuated collet closer supports 0.1 mm to 7.9 mm O.D. materials with frictionless rotary union Clear aperture
Screw Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
VT-80 Linear Stage. Related and Compatible Products. Basic Version for Universal Use
VT-80 Linear Stage Basic Version for Universal Use Travel ranges from 25 to 300 mm (1 to 12") Low profile Max. velocity to 20 mm/s Load capacity to 5 kg Standard-class linear stage Recirculating ball bearings
Linear Servo Motor Driven
Linear Servo Motor Driven High Speed, High Precision Tables Positioning systems needed for many of today s high-technology applications must satisfy an ever-increasing demand for high throughput and the
AXR Series. Two-Axis Rotary Assembly. Multiple configurations support a range of load and accuracy requirements
AXR Series Two-Axis Rotary Assembly Multiple configurations support a range of load and accuracy requirements Integral rotary union for vacuum- or airactivated tooling High-speed yaw axis provides up to
Minibot Series. Miniature Precision Actuator Family. The Precision Alliance. Ph: us.com
Miniature Precision Actuator Family Ph: 800-284-9784 Simple Low Cost Design Compact Package Highly Configurable Maintenance Free Long Life Introduction The proliferation of life science and medical instruments
SM Series. High-Performance Stepper Motors. Industry-standard NEMA frame stepper motors. Available encoder feedback and brake options
SM Series Rotary Motors SM Series High-Performance Stepper Motors Industry-standard NEMA frame stepper motors Available encoder feedback and brake options Models to run off of North American & Asian/European
Compact Linear Stage
Compact Linear Stage With DC or Stepper Motor L-505 Travel ranges 13 or 26 mm Stepper motor or DC servo motor with and without gearhead Velocity to 15 mm/s Load capacity to 30 N Integrated reference point
Compact Linear Stage
Compact Linear Stage For Loads to 10 kg L-406 Travel ranges from 26 mm to 102 mm (1" to 4") Stepper motor or DC servo motor with and without gearhead Direction-sensing reference point switch Integrated
T-MAX SERIES Direct Drive Rotary Servo
T-MAX SERIES Direct Drive Rotary Servo T-MAX SERIES Direct Drive Rotary Servo Low Profile Direct-drive Rotary Stage Smooth Brushless Servo-drive Positioning Motion Integrated High Resolution Rotary Encoder
PIglide RM Rotation Stage with Air Bearings
PIglide RM Rotation Stage with Air Bearings Friction-Free, Ideal for Indexing, Positioning, Scanning, Measuring Technology A-62x Cleanroom compatible Motion platform diameter from 50 mm to 300 mm Load
Rotary Positioning Stages Introduction
Introduction Features Aluminum/steel construction Protective black anodize finish Low-friction rotary adjustment Precise/accurate movement Trouble-free operation aedal precision rotary stages are utilized
BM Series. DC Brushless Rotary Servomotors. Standard NEMA frame sizes. Neodymium iron boron rare-earth magnets maximize performance
BM Series Rotary Motors BM Series DC Brushless Rotary Servomotors Standard NEMA frame sizes Neodymium iron boron rare-earth magnets maximize performance Skewed stator with 8-pole design minimizes torque
UMR Series Precision Double-Row Ball Bearing Linear Stages. Angular Deviation
877 UMR Series Precision ouble-row Ball Bearing Linear Stages Shown with optional M-PBN Base Plate and UTR Series Rotation Stage (Order actuators, rotation stage and base plates separately) Low-profile
Screw Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
Extruded Positioning Stage
Extruded Positioning Stage Single-axis stage Turnkey operation Modular aluminum construction with integral brushless linear motor, linear encoder, limit switches, cable carrier, linear bearings and bellows
PRO165LM Hardware Manual. Revision:
PRO165LM Hardware Manual Revision: 1.08.00 Global Technical Support Go to www.aerotech.com/global-technical-support for information and support about your Aerotech products. The website provides downloadable
!Servo Motors & Drives. !Gearmotors & Gearheads. !Linear & Rotary Positioning Stages. Ultra Series Product Manual
!Servo Motors & Drives!Gearmotors & Gearheads!Linear & Rotary Positioning Stages Ultra Series Product Manual Ultra Series Product Manual Rev: 1 / 904 Please check www.baysidemotion.com for latest revisions.
LRQ-DE Series Datasheet
Simplifying Motion Control LRQ-DE Series Datasheet * 75, 150, 300, 450, 600 mm travel * Up to 13 µm accuracy over 600 mm travel * 100 kg load capacity * Up to speed and up to 300 N thrust * Integrated
Mini-MAG Positioning Products
Mini-MAG Positioning Products Miniature Linear Stage The Mini-MAG (MMX) line of miniature linear stages blends the ultimate in performance, reliability, and value, delivering nearly twice the accuracy
LRQ-E Series Datasheet
Simplifying Motion Control LRQ-E Series Datasheet 75, 150, 300, 450, 600 mm travel 100 kg load capacity Up to 8 speed and up to 300 N thrust Encoder position feedback with slip/stall detection and automatic
SM Series. Hybrid, Permanent Magnet Motors. Industry-standard NEMA 23 and 34 frame sizes for ease of installation
SM Series Rotary Motors SM Series Hybrid, Permanent Magnet Motors Industry-standard NEMA 23 and 34 frame sizes for ease of installation Torque of 0.3 to 2.6 N-m (38 to 370 oz-in) covers virtually any application
BMS Series. DC Brushless Torque Motors. Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control
BMS Series Rotary Motors BMS Series DC Brushless Torque Motors Slotless, brushless stator design provides zerocogging torque for unsurpassed velocity control Smoother velocity than with standard DC brushtype
Trilogy. Linear Motors and Positioners. Rometec srl - - Rometec srl - - Rometec srl -
Rometec srl - www.rometec.it Trilogy Linear Motors and Positioners Rometec srl - www.rometec.it Rometec srl - www.rometec.it WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF
DS4-SERIES POSITIONING TABLES
www.danahermotion.com/ds4 DS4-SERIES POSITIONING TABLES Performance & Versatility in a compact design For single- & multiaxis requirements, DS4 is your modular solution. PERFORMANCE DURABILITY FLEXIBILITY
Positioning Systems. Linear Motor Stages Product Overview. LMX1E-C Page 14. LMX1L-S Page 19.
8 inear Motor Stages 2.1 Product Overview MX1E-C Page 14 Complete linear stage with coreless motor, type MC Excellent for applications with a high degree of synchronous operation requirements Also for
X-LSM-E Series Datasheet
Simplifying Motion Control X-LSM-E Series Datasheet * 25, 50, 100, 150, 200 mm travel * 10 kg load capacity * Up to speed and up to 55 N thrust * Built-in controller; daisy-chains with other Zaber products
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
rtisan Technology Group is your source for quality new and certified-used/pre-owned equipment FST SHIPPING ND DELIVERY TENS OF THOUSNDS OF IN-STOK ITEMS EQUIPMENT DEMOS HUNDREDS OF MNUFTURERS SUPPORTED
Akribis Systems. Where Precision Matters
Akribis Systems TM Where Precision Matters Akribis Logo TM Akribis is a Latinized Greek word that means Precision. On the logo, the letter a is formed by a line and a circle, representing linear and rotary
MOUNTING CARRIAGE TOPS
MOUNTING CARRIAGE TOPS Linear Motion Systems " I " Holes (4) are for customer mounting purposes. MOTOR TABLE TOPS USE M4X.7 TAPPED HOLES Material: Aluminum Alloy (6061) Finish: Black Anodized Note: Mounting
Crossed Roller & Ball Bearing Series Crossed Roller & Ball Bearing Linear Slides: High Precision
rossed Roller & earing Series rossed Roller & earing Linear Slides: High Precision ompact Design with Smooth Motion rossed Roller & earing Linear Slides: Overview 0.00008 inch straightline accuracy per
stage from resolution accuracies is 400 peak) and the from an to outpu positioning (as shown N] continuous continuous needs
![stage from resolution accuracies is 400 peak) and the from an to outpu positioning (as shown N] continuous continuous needs](/thumbs/80/81553844.jpg "stage from resolution accuracies is 400 peak) and the from an to outpu positioning (as shown N] continuous continuous needs")
Earthquake Simulation Using Single or Dual-Axis Linear Motion Stages With the goal of safer buildings and saving lives, scientists and engineers, through the simulation of many recent earthquakes, need
Model No. Travel Runout Return Force Weight (extension-compression)
Specifications: motioncontrol catalog manualstages MM-1 Standard Manual MicroMini TM Stages Constructible into over 16 different configurations (request 3 D Basic Construction Diagrams) Wobble (max): 10
LS100 Series Positioning Tables
LS100 Series Positioning Tables User s Guide A N A H E I M A U T O M A T I O N 4985 East Landon Drive Anaheim, CA 92807 e-mail: info@anaheimautomation.com (714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com
RT Series Rotary Stage Design
ROTARY POSITIONERS RT Series Rotary Stage Design Medium Load Capacity Rotary Table Series Newmark s line of rotary stages offer high resolution and repeatability. Newmark rotary stages are suitable for
Positioning Systems Linear Motor Systems
www.hiwin.de Positioning Systems HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved. Complete or partial
Extruded Positioning Stage
Sold by Servo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ 07866 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com Extruded Positioning Stage The Extruded
Ultra Precision Elevation Stages
Ultra Precision Elevation Stages Nano Precision Elevation Stage Ultra Precision Elevation Stage UPL-120 www.pimicos.com // info@pi-usa.us // 508.832.3456 East 949.679.9191 West // www.pi-usa.us 4.128 Nano
zt10 PROmech Series Miniature Linear Positioners Catalog 8094/USA Daedal
zt10 PROmech Series Miniature Linear Positioners Catalog 8094/USA Daedal PROmech LP28 Miniature Linear Positioner PROmech LP28 Miniature Linear Positioner Features: Miniature Profile Optimal length to
Positioning Systems Linear Motor Systems
www.hiwin.de Positioning Systems Linear Motor Systems HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved.
Rotary Tables. Z Theta system
Rotary Tables High force Air bearings Roller bearings XY tables Z Theta system Cartesian systems Linear stepping motors and systems Linear brushless motors and systems Linear measurement systems Semiconductor/Electronics
zt08 I-FORCE Ironless Linear Motor Positioners Catalog USA
zt08 I-FORCE Ironless Linear Motor Positioners Catalog USA TABLE OF CONTENTS I-Force Ironless Linear Motor Positioner T1D N T1S P T2D R T2S T T3D V T3S NN T4D NP T4S NR How to order NT I-FORCE Ironless