NEW BUILD - 15m Oil Spill Response Vessel Listing ID:

Transcription

1 Australia - Great Britain - Indonesia - New Zealand - Philippines - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) NEW BUILD - 15m Oil Spill Response Vessel Listing ID: DESCRIPTION: DATE LAUNCHED: LENGTH: BEAM: DRAFT: LOCATION: BROKER: PRICE: NEW BUILD - 15m Oil Spill Response Vessel BUILT TO ORDER 15m (49ft 2in) 5.5m (18ft) 1.5m (4ft 11in) ex factory, India Geoff Fraser POA General Description DESCRIPTION The vessel shall be constructed as a high speed, sea kindly Whale Watching and Passenger service vessel. The Helm is raised and arranged to allow all round vision. Provision will be provided for storage of Oil Spill Response equipment, Fire Fighting equipment, etc.. PRINCIPLE DIMENSIONS Length overall (Hull Moulded) meters Length at waterline meters Beam 5.50 meters Draft 1.50 meters Fuel 3000 litres Water 500 litres Power Cummins QSL-9 x 2 ( RPM) Gear Boxes ZF Propulsion Conventional Drives Speed (Cruising) 22 Knots (90% MCR) (Maximum) 24 Knots (Light Ship) Oil Spill Response Crew 3 Crew (Vessel Operation) 2 Dispersant Deck Equipment 2 Accessories 0.5 Tonnes HULL AND SUPERSTRUCTURE GENERAL The vessels hull shall be moulded in GRP, transversely framed and longitudinally stiffened with scantlings in accordance with the Indian Register of Shipping (IRS) an IACS member, for GRP planing craft, under Certification of the IRS or equivalent. Four (4) watertight bulkheads shall be provided for watertight subdivision in each hull. Limber holes to be provided as necessary to ensure proper drainage and ventilation of all tanks, compartments, pockets and voids. Insert blocks shall be used for all local structural reinforcement as required. Additional stiffening shall be applied above the propellers and ample tip clearance shall be provided. The bow and stern quarters shall be additionally stiffened internally. 85 dba. shall be the desired sound level within the main deck cabin area. MATERIALS: All materials used shall be in accordance with the Standards approved by the IRS. HATCHES AND DOORS The following hatches and doors shall be provided: - Watertight soft patches over engine bays. - Watertight access hatches fitted to engine rooms. - Weather tight door fitted to cabin aft bulkhead. - Weather tight anchor locker in bow. - Watertight hatches (flush) to steering compartments. Page 1 of 6

2 DECK FITTINGS AND HARDWARE 1. Eight off aluminium mooring bollards at each corner of the vessel (Twin pillar style). Towing Bollards shall be located at rear of cabin structure (panama style) in the bulwarks. 2. One set mooring line 3. One set aluminium rails as shown. 4. Mounting (reinforced) for deck crane (options) 5. Removable guard rails on both sides of vessel. 6 Anchor winch with drum end (2 tonnes capacity) shall be fitted at the bow port side. Capstan shall be fitted at the stern, starboard side (2 tonnes capacity). Above winch shall be hydraulically actuated. 7. Underfloor storage with watertight flush hatches shall be provided for storage boom anchors, rope and connectors. 8 Recessed tie down points shall be provided on the main deck to secure equipment. PAINTING AND DECK FINISHES The vessel's hull and superstructure shall have a FRP high gloss finish. The side, aft and foredeck shall be provided with a non-skid paint finish. All underwater areas shall be anti-fouled and provided with sacrificial anodes as required. FENDERING Flexible fender sections 1.00 Meter long shall be recessed into the vessels sides, bow and stern quarters. These shall be located at the agreed height from the main deck level. The vessels bulwarks shall be strengthened to support the recessed fenders. Fenders diameter shall be approximately 450 mm. ENGINEERING MAIN ENGINES AND GEARBOXES GENERAL Two (2) off freshwater heat exchange, sea water cooled, Cummins model QSL 9 ( RPM) or equivalent, medium continuous rating diesel engines shall be installed coupled to reverse / reduction marine, gearboxes as specified by engine suppliers. Alarms on main engine function (no shutdowns). The engines shall be fitted with an electric starter motor, crankshaft p.t.o. for steering pump. Water injected exhaust elbows. An auxiliary p.t.o. and bilge pump shall be fitted to one engine. Engines instrument panel and key stop / start to be provided for the main helm. Main engines to be resiliently mounted to ship's structure. Crank case breather shall be plumbed to above deck. Axial fans shall be fitted, 220 volt, in the machinery space for ventilation. Cummins QSL 9 Series Engine Brochure as Below. DRIVE AND STEERING SYSTEM GENERAL The gearboxes shall be connected to 316 stainless steel propeller shafts (3") supported in heavy walled brass stern tube and water lubricated bearings. Stern tube glands shall be provided. Manganese bronze, balanced 4 blade propellers shall be fitted. Semi balanced rudders constructed of stainless steel with a stainless steel stock shall be provided. Cast bronze tillers shall be fitted to the stocks and actuated by double acting hydraulic rams. Two (2) off 1500 litres aluminium fuel tank shall be provided and installed. Fuel tank vents shall terminate above deck level. Duplex fuel filters, Raycor or similar, to be fitted to main engines. Approved flexible hoses to be used for all engine connections. Tank level instruments to be installed (sight tube), to be actuated by weight valve. Fuel drain valves and inspection hatches shall be installed. Emergency shut off valves remote operated shall be installed. DECKWASH / BILGE SYSTEM Engine driven deckwash / bilge pump shall be provided with bilge suction forward, midship and engine compartments. An emergency hand pump shall be provided. Non return valves shall be installed to overboard discharge lines. A sea-suction and deck wash outlet fitted and plumbed to the bilge pump. A non return valve or "L" port cock to be fitted to prevent back flooding. EXHAUST SYSTEM Main engine exhaust fittings shall be constructed of stainless steel and shall provided with a flexible hose sections and water injections. Exhausts shall terminate at the vessel's transom area and shall be fitted with a self closing flap. MACHINERY INSTRUMENTS Pilot House Instruments Engine Oil Pressure gauge Gear Oil Pressure gauge Water Temperature gauge ELECTRICAL The electrical power shall be supplied from two banks of low maintenance lead acid batteries located in an enclosure in the machinery space. Battery selection will be via a Colhersee or similar rotary selection switch mounted adjacent to the batteries. The batteries will be float charged by engine driven battery charging alternators. Wiring shall be ISI Approved having electrical, mechanical and thermal properties complying with the Survey Authorities. The following shall be supplied: Page 2 of 6

3 The electrical power shall be supplied from four lead acid batteries located in an enclosure in the machinery space. Battery selection will be via a Colhersee or similar rotary selection switch mounted adjacent to the batteries. The batteries will be float charged by engine driven battery charging alternators. Wiring shall be ISI Approved having electrical, mechanical and thermal properties complying with the Survey Authorities. The following shall be supplied: (a) Cabin Lighting Helm and cabin areas (b) Deck Lighting Boarding lights fitted to walkways and floodlights to main deck (c) Navigation Lights (i) Anchor Light (ii) Masthead light (iii) Port side light (on roof) (iv) Starboard side light (on roof) (v) Stern Light (vi) Flashing Orange Light (c) Search Light (2 off) 360 degrees search light mounted on wheel-house roof (d) Three Circuits Spare circuits supplied (e) VHF Radio (2 off) Raymarine RAY 49E (f) HF Radio (Optional Extra) (g) SSB Radio (1 off) Raymarine 240E (h) Auto Pilot (Optional Extra) (I) Radar Furuno Navnet 3D System (j) Echo Sounder Furuno Navnet 3D System (k) Speed Log (l) Magnetic Compass (m) GPS Furuno Navnet 3D System (n) Shore Power Connection (o) Loud Hailer Furuno LH 3000 (p) Portable VHF Radio (2 off) (q) AIS Raymarine AIS 950 (r) Navtex Receiver (Optional Extra) (2 off) (i) Manual anchor winch (rope & chain) clutch type (Optional Electric Type). (j) Compass - swung at port of final delivery. (k) Tap in Engine room - F.W. pressure fed. (l) Depth Sounder (m) Chart Plotter (n) Radar (o) GPS (p) AIS (q) Compass (r) SART (s) Autopilot (Optional Extra) (t) SSB Radio (u) Galley - Electric Kettle - Microwave Oven - Refrigerator with freezer (100 litres) - Cabinet spaces for storage with Dinette for six. SAFETY EQUIPMENT The following safety equipment shall be provided : (Included in quotation) : (a) Inflatable Life Rafts as per Class requirements (b) Life Buoys as per Class requirements (c) Fire Extinguishers as per Class requirements (d) Fire Buckets as per Class requirements (e) Anchor with rope & chain (f) Audible Alarm warning horn (g) Portable Torch (2 off) Battery operated (h) Tool / Maintenance Kit (i) First Aid Kit (1 off) (j) Fire & Safety Plan to be displayed (k) Life Jackets (10 off) or as per Class requirements FIRE FIGHTING EQUIPMENT An engine driven fire pump providing a constant 150 Kilo Pascals shall be fitted with 18 meters of hose with nozzle mounted on a hydrant adjacent to the wheel-house. Fire pumps shall be driven via an approved coupling / decoupling mechanism. Two (2) off portable CO2 fire extinguishers will be provided. Nine (9) off 9 litre foam extinguishers will be provided. DISPERSANT SPRAY FACILITY Hinged aluminium spray arms shall be mounted on the bow of the vessel situated at 2.0 to 2.5 meters above water level. Spray coverage shall be 20 meters. Two (2) off dispersant tanks (7500 litres each) made as an integral part of the vessel with calibrated dip stick shall be supplied. Transfer of dispersant to be able to be done from forward to aft tanks via owners dispersant pump. Page 3 of 6

4 The dispersant filling points and sullage shall be easily accessible and not subject to sea water egress. All associated pipework to connect boom to dispersant tank shall be provided by the Builder - Praga Marine Private Limited. AIR CONDITIONER / GENERATOR AIR CONDITIONER Air cooled two stage system (Carrier or equivalent) shall be installed with centre ducting fitted with dampers in saloon to ensure no cold spots occur 420 c to 20 / 240 c cooling efficiency. Ducting shall be insulated to ensure no that no condensation build up may occur. Heat exchangers in air-conditioning system shall have sacrificial zinc anodes fitted. Alternatively Split Air conditioning system can be installed. GENERATOR Two, Sole diesel 17 GTC, 16.4 KVA 50 Hz, sea water cooled marine gen set or equivalent shall be installed in compartment forward of engine room of Starboard and Port hull as recommended by the designer Mark Ellis Marine Design. FM-200 GASEOUS FIRE FIGHTING SYSTEM (Included in this Quote) The FM 200 gaseous system uses a regulated greenhouse gas, under the Ozone Depleting Substances & Synthetic Greenhouse Gases (ODS & SGG) Management Regulations This gaseous system works in seconds and is readily suited to the protection of high value assets. The FM 200 provides total flood when used in; computer and electronic control rooms, telecommunication and switch rooms, data processing centres, vaults/tape storage, marine machinery spaces, chemical storage and clean rooms, medical laboratories and emergency power facilities. Features: Uses a regulated greenhouse gas that are liquefied under pressure for storage These agents are classified as suitable for use in occupied areas and are considered to have no ozone depleting potential (ODP). The systems are designed in accordance with AS Gaseous fire extinguishing systems, parts 1 and 2. DECK CRANE To supply and fit a FASSI - F hydraulic crane or equivalent with hydraulic pump supply and winch installed includes manual extension. OIL SPILL RESPONSE EQUIPMENT Oil spill response equipment shall be provided and provision for installation allowed for by the Builder. Provision to move easily the 400 mm boom mounted reels forward and aft for better weight distribution whilst travelling and required position for deployment (1000 mm. increments for locating boom assembly shall be provided). Three (3) off 400 meter VIKOMA inflatable boom and reels or similar shall be provided. FIXING All fasteners throughout the vessel shall be of 316 grade stainless steel with nylon insulators utilised where dissimilar metals, as required. SPRAY PUMP Option spray pump with mixer for water, foam, dispersant use. Mounted below deck with separate sea water suction, connection to dispersant tanks or drum foam carried on deck. (Price - To Be Advised) TROLLING VALVES To supply and fit trolling valves to each main engine gearbox. The valve would allow the engine to operate at a higher speed than would be required for the vessel speed (actually slip clutch) and give much greater flexibility for operation and manoeuvring. (Price - To Be Advised) BOWTHRUSTERS Praga Marine Private Limited offers to install into the starboard bow a hydraulic bowthruster of approximately 35 HP capacity. (Price - To Be Advised) Praga Marine Private Limited offers to make provision for Retro fitting of a bowthruster whereby structure in the starboard hull shall be designed to fit unit at a later date. TRAINING For two (2) weeks training on the vessel, covering all aspects of the vessel and equipment operation routine maintenance and Oil spill equipment training. (Price - To Be Advised) Maintenance manuals, operation manuals are provided with the vessel and normal commissioning trails are included with the price. CLASSIFICATION The Vessel/s shall be constructed in accordance to the relevant Class under Survey and Certification of the Indian Register of Shipping (IRS) an IACS member classification society. INTERPRETATION The quality of construction testing and trials of the vessel/s, its machinery, fittings, equipment, material and workmanship shall be in accordance with accepted standards of shipbuilding practice and in accordance with the Specification and Plans. The Specifications and Plans are intended to explain each other and anything shown in the Plans but not stipulated in the Specifications or stipulated in the Specifications but not shown in the Plans, shall be deemed and considered as if included in both. Page 4 of 6

5 In the event that there should exist any conflict, inconsistencies or contradictions or there should be any doubt regarding the interpretation between the Plans and Specifications, the Specifications shall prevail and govern. Likewise in event of inconsistencies or contradictions between Plans or the Specifications and the Agreement, the provisions of the Agreement shall prevail and govern. Not with-standing anything to the contrary in this Agreement, Plans and Specifications, it shall be obligatory to the BUILDER to construct and deliver the vessel/s in compliance with the requirements of the Class, the Laws, rules and regulations mentioned in the Specifications. IMPORT DUTY At present, any materials and equipment imported for the purpose of construction of vessel/s for Export are fully exempted from Import Duties. However, should this Exemption Notification be withdrawn or if any Import Duties are levied at any time, the amount of such Duties will be charged to the Buyers Account and payable at the time of clearance of the goods at the Port of delivery. TRIALS Trials will be conducted prior to hand over in Cochin in accordance with the requirements of this specification in the presence of the Owners Representative. Upon completion of satisfactory Trials the vessel will be accepted by the Owner and Delivery taken afloat alongside Builders Yard. Speed trials will be carried out in gentle sea breeze conditions as defined in Beaufort scale. The condition of the vessel will be in fully laden condition with 40 passengers (equivalent to 65 Kg. Each), with 50% of fuel and 50% water capacities. Trials will be taken over a measured distance and the average time for four runs (two in each direction) will be taken. DELIVERY The BUILDER shall deliver the Vessel/s and the BUYER or his authorised representative shall take delivery of the Vessel/s afloat and complete in all respects in accordance with the Specification free along side the BUILDERS SHIPYARD. The schedule of delivery shall be as follows: YARD No. CAT / 15 / 01-OSRV Vessel No WEEKS On delivery of the Vessel/s, the BUILDER and BUYER shall sign a Protocol of Delivery and Acceptance. On signing of the same, the title and Risk of the Vessel/s shall pass onto the BUYER. Provided that the BUYER shall concurrently pay to the BUILDER all sums due and payable upon delivery of the Vessel/s, the delivery of the Vessel/s shall be forthwith effected upon Acceptance thereof by the BUYER, of a Protocol of Delivery and Acceptance which is concurrently delivered by each of the parties to the other party acknowledging delivery of the Vessel/s by the BUILDER and Acceptance thereof by the BUYER. This Protocol shall be prepared in duplicate and executed by each of the parties. Delivery is subjected to prior orders and availability of yard space. IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale price change, or withdrawal without notice. NEW BUILD - 15m Oil Spill Response Vessel Images Page 5 of 6

6 Page 6 of 6