TECHNICAL SPECIFICATIONS

Transcription

1 CapDI SYSTEMS TECHNICAL SPECIFICATIONS

2 CapDI Voltea CapDI Membrane Capacitive Deionization We specialize in tunable water deionization that is designed to remove total dissolved salts (TDS) from a variety of water sources, ranging from tap water and brackish groundwater to industrial process water. CapDI achieves this at a lower economic cost and reduced environmental impact than any other available technology. Voltea s CapDI technology treats water types ranging from residential consumer appliances to large-scale industrial plants. Our systems are modular, allowing easy expansion to meet any increased water demands. CapDI Benefits Quality Assurance Automated cleaning CE Certified Remote monitoring available High water recovery, up to 95 % Tunable TDS reduction, up to 95 % Complete system monitoring and feedback UL on request Factory Acceptance Test on request Systems and Modules Quality Control Tested Voltea Remote Monitoring and Control Package Dynamic Control - controlled output water quality Customizable system sizing to reach client needs Operation at high temperatures, up to 60 C (140 F) Low energy usage, 0,4-0,8 kwh/m ( kwh/kgal) Patented Membrane Capacitive Deionization Technology Feed Water Quality PARAMETER UNIT RANGE INTERMITTENT Removal Limit Δppm Total Dissolved Solids (TDS) ppm Total Organic Carbon Chemical Oxygen Demand Turbidity ppm ppm NTU < 15 < 50 < 4 Fats, Oils, Greases ppm < 0.5 < 100 < 100 Total Suspended Solids (TSS) ppm < 4 < 20 Free Chlorine ppm < 1 < 25 ph Iron total ppm < 0.5 Total Hardness (CaCO )* M Alkalinity (as CaCO )* ppm < 1000 ppm < 1000 Pre-filtration µm 5 Temperature C 1-60 Chemicals - Contact Voltea 1-12 * Limits depend on set TDS reduction and water recovery

3 IS-2H CapDI IS-2H Industrial Series 1-2 Module Skid 0-40 L/min (0-11 gpm) 0,2-2,1 m /h (1-9 gpm) 0,2-1,2 m /h (1-5 gpm) 0.6 kw, please specify 1-ph 110 V AC / 60 Hz OR 20 V AC / 50 Hz 0,85 x 0,8 x 1, m (2 10 x 2 7 x 4 ) 250 kg (550 lbs) 1/ 1/ 1/ 2,1 m bar ( 9 40 psi) 1-60 C (4-140 F) 50 L/min (1.8 6 bar (90 psi), pneumatic, size /8 Input - Potential free contact (0-0 V DC / V AC, 0-5 A)

4 IS-6H CapDI IS-6H Industrial Series -6 Module Skid 0-85 L/min (0-22 gpm) 0,5-6,1 m /h ( gpm) 0,5 -,5 m /h ( gpm) 1.4 kw, please specify 1-ph 110 V AC / 60 Hz OR 20 V AC / 50 Hz 0,9 x 1,1 x 1,6 m (2,11 x '7 x 5 ) 400 kg (880 lbs) 1 union 1 union 1 union 6,1 m bar ( psi) 1-60 C (4-140 F) 100 L/min (.5 6 bar (90 psi), pneumatic, size /8 Input - Potential free contact (0-0 V DC / V AC, 0-5 A)

5 IS-12H CapDI IS-12H Industrial Series 7-12 Module Skid L/min (0 - gpm) 1,1-12,2 m /h (5-54 gpm) 1,1-7,0 m /h (5-1 gpm) 2.4 kw, 1 ph V AC, Hz AND ph with neutral V AC, Hz 1,65 x 1,0 x 2, m (5'5 x '4 x 7 7 ) 620 kg (1,400 lbs) 1 1/ 1 1/ 1 1/ 12, m bar ( psi) 1-60 C (4-140 F) 100 L/min (.5 6 bar (90 psi), pneumatic, size /8 Input - Potential free contact (0-0 V DC / V AC, 0-5 A)

6 IS-24 CapDI IS-24 Industrial Series 1-24 Module Skid L/min (0-12 gpm) 2,2-17, m /h (10-76 gpm) 2,2-10,0 m /h (10-44 gpm) 4.6 kw, -ph with neutral ( V AC / Hz),1 x 1,0 x 2, m (10 1 x x 7 7 ) 1,200 kg (2,645 lbs) 17, m bar ( psi) 1-60 C (4-140 F) 200 L/min (7 6 bar (90 psi), pneumatic, size 1/2 Input - Potential free contact (0-0 V DC / V AC, 0-5 A)

7 IS-6 CapDI IS-6 Industrial Series 25-6 Module Skid L/min (0-26 gpm),2-25,9 m /h ( gpm),2-15,0 m /h (14-65 gpm) 6.8 kw, -ph with neutral ( V AC / Hz) 4,6 x 1,0 x 2, m (12 2 x x 7 7 ) 1,800 kg (4,000 lbs) 2 1/ 2 1/ 25,9 m bar ( psi) 1-60 C (4-140 F) 00 L/min ( bar (90 psi), pneumatic, size 1/2 Input - Potential free contact (0-0 V DC / V AC, 0-5 A)

8 IS-48 CapDI IS-48 Industrial Series 7-48 Module Skid 0-1,500 L/min (0-95 gpm) 4, - 4,6 m /h ( gpm) 4, - 20,0 m /h (19-87 gpm) 9.8 kw, -ph with neutral ( V AC / Hz) 5, x 1,0 x 2, m (17 4 x x 7 7 ) 2,400 kg (5,00 lbs) 2 1/ 2 1/ 4,5 m bar ( psi) 1-60 C (4-140 F) 400 L/min (14 6 bar (90 psi), pneumatic, size 1/2 Input - Potential free contact (0-0 V DC / V AC, 0-5 A)