UT-1200X. Unmatched Capacity and Reliability for Undermount Applications

Transcription

1 UT-1200X Unmatched Capacity and Reliability for Undermount Applications Self Powered Truck Single Temperature Low emission and high performance engine Reduced operating costs Superior quality and reliability

2 The New UT-1200X The new Thermo King UT-1200X is designed to have a positive impact on your bottom line and very little impact on the environment. The UT-1200X was developed for undermount applications on trucks and drawbar trailers. This new unit was extensively tested at Thermo King s state-of-the-art global research and development centres, making it the industry benchmark in reliability, durability and performance. Benefits for you: Lower fuel consumption Improved reliability Improved refrigeration capacity Easy, low-cost installation Easier service accessibility 2 Benefits for the environment: Lower fuel consumption Reduced engine emissions with new GreenTech engine R-404 A refrigerant EMI 2000 hours extended maintenance interval

3 The green engine from Thermo King low emission, high performance: TK 3.76 Engine life The new range of truck engines is more powerful, running at no more than 80% of their maximum output. Both oil and coolant temperatures are reduced, resulting in less component stress and less engine wear. Engine life will be extended by up to 20% and the engine will find it even easier to withstand high ambient temperatures. Noise The TK 3.76 engine has no effect on the overall sound power / pressure of the unit. Fuel consumption Although reduced-emission engines are typically less fuel efficient, this new engine is as economical as its predecessor. Emissions (Particulate Matter): Competitor vs New Truck Unit Engines g/kw/hr (PM) % less Emissions (Particulate Matter): Old vs New Truck Unit Engines g/kw/hr (PM) down 75% 0.17 old TK 3.95 new TK 3.76 Bio-fuel compatibility All the new engines are approved for use with B5 fuels (5% bio / 95% petroleum diesel) with no change in the maintenance schedule. Fuels with a higher bio-diesel content (B6 up to B100) will require shorter intervals between oil changes and injector servicing. EMI 2000: Extended Maintenance Interval These units come equipped as standard with Thermo King s exclusive EMI 2000 filter and fluids package, thus increasing service intervals. 2,000 hour oil change 12,000 hour coolant change competitor engines new TK 3.76

4 Whisper-quiet operation Thermo King recognises the critical importance of low noise levels, especially for operation in noise-sensitive areas. The belt drive system and fan are now positioned at the back of the unit, resulting in a significant decrease in noise levels. This, combined with sound-abating packaging around critical components, makes the UT-1200X significantly quieter than competitor systems. Percentage contribution to noise reduction Scroll compressor Technological advantages High efficiency means high capacity Greater capacity means fast pulldown/recovery 83% fewer moving parts means high reliability/long life Lower fuel consumption means more operating profit Tuned intake, muffler and exhaust system Cyclonic air filter Scroll compressor Low emission engine 20% 35% 45% Noise absorption materials Environmental advantages Less fuel required means less fuel consumed Less fuel consumed means lower diesel emissions Quieter operation means lower noise emissions Chlorine-free R-404A means zero ozone depletion 4 User-friendly Smart Reefer controller Thermo King s SMART REEFER microprocessor controller features an easily read backlit liquid crystal display and simple-to-operate touch, and it can be customised to match individual needs. The controller can be conveniently installed in the driver s cab or in a weatherproof enclosure on the truck body. Exclusive driver training software such as Thermo King s Tutor Series provides rapid but effective interactive training to reduce driver error and ensure optimum equipment operation. Hour meters indicate when service is due. How the scroll compressor works: Compression in the scroll is created by the interaction of an orbiting spiral and a stationary spiral. Gas enters an outer opening as one of the spirals orbits. The open passage is sealed off as gas is drawn into the spiral. As the spiral continues to orbit, the gas is compressed into an increasingly smaller pocket. By the time the gas arrives at the centre port, discharge pressure has been reached. Actually, during operation, all six gas passages are in various stages of compression at all times, resulting in nearly continuous suction and discharge. Weatherproof enclosure

5 Features & Options 1 TotalKare Because maintenance costs constitute a key variable in the Total Life Cost of a temperature control system, we now offer, through TotalKare, a complete selection of maintenance programmes. 2 Cycle-Sentry Stops engine when refrigeration is not needed and restarts when refrigeration or battery charge is needed. Fuel savings of up to 80% Increases component life Reduces maintenance costs 3 Extended maintenance interval Thermo King s EMI 2000 package will extend your maintenance interval and reduce your operating cost by: Reducing clean-up and disposal costs Reducing environmental impact with less spillage and less waste Extending engine life with improved, highly efficient filtration Reducing scheduled maintenance costs by up to 40% 4 Thermo King high performance battery The Thermo King high performance battery is designed exclusively for transport refrigeration applications. It is the only battery recommended by Thermo King for its equipment. It incorporates new Silver and Calcium technologies that provide performance far superior to that of any conventional automotive battery technology. The Thermo King high performance battery minimises your costs and maximises your confidence on the road. It is totally maintenance-free and its service life is more than 20% longer than conventional batteries. 5 Warranty coverage 1st year complete warranty 2nd year major components warranty: covers specified components Features and Options LIFE COST MANAGEMENT 1 Guaranteed maintenance contracts 2 Cycle-Sentry start / stop control system 3 EMI 2000 extended maintenance 4 Thermo King high performance battery 5 Warranty coverage 6 TherMax system DATA CAPTURE & COMMUNICATIONS 7 DAS (Data Acquisition System) 8 TKDL data capture 9 Wintrac data analysis software 10 FleetWatch fleet management software 11 TracKing tracking and load monitoring LOAD PROTECTION 12 SMART REEFER in-cab controller 13 Auto phase correction 14 Diesel / electric auto-switching 15 Door switches Standard Feature 6 TherMax system Faster defrost Option: Factory Installed 7 DAS (Data Acquisition System) Option: Dealer Supplied High performance data recorder system. Records temperatures, set point, operating modes and external events. Data can be output to computer or printer Operates independently of unit controller 512K memory stores over one year s data Reassures customer of total quality control Provides evidence of correct practice Approved to EN-12830, CE Mark and IP-65 standards Up to six independent sensors Automatic power-up and shut-off to protect unit battery 5

6 6 8 TKDL User-friendly temperature recorders for all makes of temperature-controlled equipment Simple data offload to PC Delivery and journey printouts at the touch of a button Approved to EN-12830, CE Mark and IP-65 standards Up to four independent sensors and 512K memory 9 WINTRAC (data analysis software) Wintrac is a Windows-based, simple-to-use, multilingual management software package designed to communicate with and read data from all Thermo King temperature recorder devices. It provides quick and easy answers to all your questions in relation to the performance of the temperature control unit and the temperature of the produce while in transit. 10 FleetWatch User-friendly software empowers fleet manager with automatic custom reporting. Provides seamless connection to collect and organise output from Thermo King s DAS and TKDL data recorders Automatically organises data recorder output data into simple, selectable reports useful to your operation Reports are easy to understand and user-friendly 11 TracKing Complete load monitoring and fleet tracking at your fingertips Monitors sensitive loads via the web Increases truck asset utilisation Reduces operating costs Enhances customer satisfaction Increases security and reduces insurance risk TracKing can be sold with a TotalKare service contract TracKing is compatible with all Thermo King dataloggers and trailer controllers 12 Smart Reefer in-cab controller Simplified keypad to reduce incorrect operation of the system Visible set point confirmation for load protection Enhanced temperature management Unit self-check for reduced down-time Alarm codes for simplified trouble-shooting Programmable features to tailor operating conditions to the load 13 Auto phase correction Avoids reverse fan rotation while on electric stand-by Protects load 14 Diesel/electric auto switching Automatically starts diesel engine if electric stand-by fails Manual override for ferry operation Protects the load automatically (without manual intervention) 15 Door switches Magnetic door switch minimises cargo temperature fluctuations Protects load Exclusive driver training software Thermo King s Tutor Series with Professor Kool provides rapid and effective interactive training to reduce driver error and ensure optimum equipment operation. Scissor Kit: scissor-truck hose and harness kit. Designed for airport catering and scissor lift truck applications.

7 Specifications System Performance REFRIGERATION CAPACITY: (NB: CAPACITIES OF HOST UNIT AND INDIVIDUAL EVAPORATORS NOT CUMULATIVE.) SYSTEM NET COOLING CAPACITY AT 30 C AMBIENT TEMPERATURE UNDER A.T.P. CONDITIONS Evaporator S-3 + S-3 UTS-E Return air to evaporator 0 C -20 C 0 C -20 C CAPACITY WATTS (UP TO) WATTS (UP TO) UT-1200X on engine power UT-1200X on electric stand-by AIRFLOW Airflow 0 Pa static pressure 4000 m 3 /hr 3740 m 3 /hr Discharge velocity (airthrow) 9.5 m/sec 6.6 m/sec DEFROST / HEATING CAPACITY: SYSTEM NET COOLING CAPACITY AT -29 C AMBIENT AND HIGH SPEED ENGINE / 60 HERTZ ELECTRIC OPERATION Engine power 5300 watts 5300 watts Electric power 3500 watts 3500 watts WEIGHT Evaporator 110 kg 84 kg Net weight unit 515 kg ENGINE: DIRECT INJECTION DIESEL, 3 CYLINDER, LIQUID COOLER Model TK 3.76 Rating 15 kw Maintenance interval 2000 hrs COMPRESSOR: LIGHTWEIGHT ALUMINIUM ALLOY SCROLL COMPRESSOR Model TKO 6.0 scroll Displacement 98 cm 3 ELECTRIC STAND-BY MOTOR (MODEL 50) Voltage / phase / cycles 380/3/50 Rating 7.5 kw REFRIGERANT: R-404A ZERO OZONE DEPLETION POTENTIAL (ODP), INTERNATIONALLY APPROVED Charge 5.5 kg 7 Dimensions- millimetres (inches) 638 (25.1) 1615 (63.6) 634 (24.9) 302 (11.9) 694 (27.3) 795 (31.3) with muffler 1991 (78.4) 987 (38.8) 1094 (43) 201 (7.9) (2 units required)

8 Ingersoll Rand Climate Control Technologies provides equipment and services for: TRANSPORT REFRIGERATION Road Cargo Air Cargo Sea Cargo HEATING, VENTILATION & AIR CONDITIONING Bus Rail STATIONARY REFRIGERATION Commercial Applications Industrial Applications Providing equipment and services to manage controlled-temperature environments for food and other perishables, our Climate Control Technologies sector encompasses both transport and stationary refrigeration solutions. Our product brands include Thermo King, a world leader in transport temperature control systems, and Hussmann - Koxka, a manufacturer of refrigeration and food merchandising equipment For further information please contact: Ingersoll Rand Climate Control Technologies NCI Building - 4th Floor, Culliganlaan 1B, 1831 Diegem, Belgium Ingersoll-Rand Company Limited TK PL EN ( )