SpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry.
|
|
- Aldous Strickland
- 5 years ago
- Views:
Transcription
1 SpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry. Wire speed: 0 45 m/s (0 148 ft/s)
2 The fastest cutting machine SpeedCut, the fastest diamond wire cutting machine on the market is a high productivity product for the dimension stone industry. As the fastest machine of its kind, SpeedCut enables you to cut at speeds up to 45 m/s. A unique, patented wire tensioning system makes it possible to combine high cutting speed with low wire consumption by utilizing load cells technique. Main benefits Highest cutting capacity on the market Low wire consumption Full control of the cutting process 2 3
3 Maximum performance with the highest cutting capacity SpeedCut has a unique wire tensioning system that makes it possible to combine the high cutting speed with low wire consumption. This patented system enables the machine to place constant tension on the wire. + Full control of your productivity The PMI (Panel Machine Interface), allows several operations such as parameter setting, recording and loading of saved cutting data. The PMI controls both inverters (retraction/speed control) and the load cell. It keeps a constant tension on the diamond wire regardless of external circumstances such as water flow, non-homogenous materials or a fall in electric tension. Thanks to this, you gain the full potential of the wire and increase its life span. The PMI gives the operator full control through every cut. + Cuts a perfectly smooth face SpeedCut creates a perfectly smooth face of the block. It is capable of cutting both vertical and horizontal and close to ground level so that you get an even bottom. Furthermore, SpeedCut s main flywheel can be rotated 320. It can make parallel cuts with a maximum distance of two meters without repositioning, thanks to the rotation of the main flywheel. + Highest cutting capacity The combination of the 8-pole motor and the special software developed for SpeedCut is the key to reach maximum performance. The motor provides necessary torque to adapt the 1000 mm flywheel with high contact surface for a better capacity, especially when starting the cuts and makes it possible to get the wire to speeds up 45m/s. With SpeedCut you gain the highest cutting capacity available on the market. Technical specifications Main Components Two versions 75 & 100 hp. 8-pole motor. DSI application Marble Granite Sandstone Limestone Motor, 8-pole SpeedCut 75 SpeedCut 100 Inverter 55 kw/75 HP 75 kw/100 HP Diamond wire speed, variable 0 45 m/s ft/s Inverter main motor Inverter backing motor Filtered and forced air ventilation Flywheel Omron (YASKAWA) Omron (YASKAWA) Main Flywheel diameter mm 39.4" Flywheel guide diameter 425 mm 16.7" Rotation main flywheel 320 Environment Temperature limits -20 C +45 C -4 F +113 F PLC control system. PMI wire remote control. Suitable cutting stages Primary bench cutting Horizontal cutting Secondary cutting PLC control systemt Tensioning system in electronic way through a loading cell grants a constant tension of the wire PMI wire remote control It allows: The direction of commands from the operator A constant auto - diagnostics of the machine in order to find signal dysfunctions immediately Recording data and time of possible manumissions Download all the info on a B key Management and memorization of all the working parameters: Time Length of cutting Performances of the wire etc Track Two, 3 m length Light, strong and easy to connect to each other Track can be lifted and moved together with the machine A comprehensive service offering Epiroc service Even the best equipment requires regular Even service the best to ensure equipment optimal needs performance. to be serviced Epiroc provides regularly service to make solutions sure it sustains to safeguard performance. optimized An relationship Epiroc service between peak solution productivity, offers availability peace of mind, and operational maximizing availability cost. Epiroc and Mining performance and Rock throughout Excavation the Technique lifetime of has your over equipment technicians We focus on worldwide. safety, productivity By combining and reliability. the usage of Epiroc genuine parts with service provided By by combining a certified genuine Epiroc technician, parts and an you ll Epiroc service have a from winning our certified combination technicians, no matter we of safeguard where in the your world productivity you operate. wherever you are. Improved air ventilation of the electrical cabinet Two 3 m tracks that are easy to connect to each other, as well as lift and move together with the machine 75 or 100 hp 8-pole motor increases the dimensions of cut and the performance of the machine Flywheel with a new system on rubber keeping enabling easier and safer rubber replacement (on request) 4 5
4 Technical specifications Technical specifications Cutting areas (100 ) 2 m 320 +/-200 mm 90 cut Start/end cut (220 ) Horizontal cut Blind hole cut mm Accessories (optional) mm mm Device with four guide wheels for cutting at 90. Start/end cutting device with guide wheel. Start/end cutting device with spherical junction. Dimensions Length (L) mm 118.1" Width (W) mm 59.8" Height (H) mm 68.9" Weight Standard unit excluding all options and accessories kg lb Horizontal cutting device with guide wheels. Blind cutting device with guide wheels. Stabilizer legs for a quicker and safer positioning. Optional equipment Electrical connection plug. Manostat temperature control kit. 6 7
5 , Örebro, Sweden. Legal Notice Copyright 2018, Epiroc Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information. United in performance. Inspired by innovation. Performance unites us, innovation inspires us, and commitment drives us to keep moving forward. Count on Epiroc to deliver the solutions you need to succeed today and the technology to lead tomorrow. epiroc.com
SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry.
SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry. Hole diameter: 70 105 mm (2.75" 4.25") Speed up your profits SpeedROC D30 is a versatile and flexible
More informationUnigrout Flex S and Flex M. The flexible grouting system to reinforce both underground and on surface construction
Unigrout and The flexible grouting system to reinforce both underground and on surface construction 1 A flexible grouting system Quick and easy to move, the complete Unigrout and system consists of a manually
More informationFlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
More informationFLEXIROC T35,T40 SPEEDROC D30. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2
FLEXIROC T35,T40 Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 SPEEDROC D30 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone
More informationDiamec Smart 6 Core drilling rig
Diamec Smart 6 Core drilling rig Hole diameter: A, B, N and H Designed to perform Epiroc's advanced Rig Control System means the Diamec Smart 6 operates automatically. Drilling functions are easily performed
More informationFlexiROC T20 R A drill rig for surface- and underground construction
FlexiROC T20 R A drill rig for surface- and underground construction Hole diameter: 38 64 mm (1.5 2.5 ) Multi-purpose without compromise The FlexiROC T20 R (MK II) is the construction contractor s new
More informationFlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Pioneering productivity The FlexiROC T30 R quarry edition is a tophammer rig designed
More informationPowerROC T30 E Surface drill rig for quarrying and construction
PowerROC T30 E Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (3.5 5.5 ) Stronger than ever With a robust engine and a reach of 4.3 meters the PowerROC T30 E takes your performance
More informationRobbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
More informationPowerROC T25 DC Surface drill rig for drill site construction civil engineering, small aggregate and limestone quarrying.
PowerROC T25 DC Surface drill rig for drill site construction, civil engineering, small aggregate and limestone quarrying. Hole diameter: 51 89 mm (2" 3½") 1 Your way to success The PowerROC T25 DC uses
More informationFlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction
FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction Folding boom hole diameter: 38 64 mm (1½ 2½ ) Improve your speed and accuracy The FlexiROC T25 R construction edition
More informationFlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction
FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Extend your reach and versatility The FlexiROC T30 R Construction Edition is a tophammer
More informationPowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking
More informationExplorac 100 Reverse circulation drill rig for exploration drilling
Explorac 100 Reverse circulation drill rig for exploration drilling Hole diameter: 127 165 mm (5" 6.5") Fast and accurate Reverse circulation (RC) drilling represents a fast and economical way to retrieve
More informationRobbins 91/123. Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter
Robbins 91/123 Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter 1 Compact and powerful The Robbins 91 and Robbins 123 rigs are powerful raise-boring rigs with
More informationBoomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²
Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein
More informationPowerROC T35. Surface drill rig for construction and quarrying Hole diameter: mm (2½" 4½")
PowerROC T35 Surface drill rig for construction and quarrying Hole diameter: 64 115 mm (2½" 4½") 1 Power and performance Epiroc s PowerROC rigs truly live up to their names with enough muscles for tough
More informationBoltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions
Boltec S Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions 1 Making mining safe Boltec S is a fully mechanized rock bolting rig suitable
More informationScooptram ST2G. Underground diesel loader with 4 tonne load capacity
Scooptram ST2G Underground diesel loader with 4 tonne load capacity 1 Popular underground loader The scooptram ST2G is a popular choice for applications varying from mine development, production in small
More informationFlexiROC T35 & T40 Surface drill rigs for quarrying and construction
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 hole diameter: 64 115 mm (2.5 4.5 ) FlexiROC T40 hole diameter: 64 127 mm (2.5 5 ) Flexible rigs for all occasions For
More informationSimba K102 production drill rig. Hydraulic production drill rig for long-hole mining
Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift
More informationBoomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2
Boomer 281 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationPowerROC D55 Surface drill rig for mining, aggregate quarries, and construction
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction Hole diameter: 90 165 mm (39/₁₆" 6½") 1 Power up your performance The PowerROC D55 is designed according to our philosophy
More informationBoltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters
Boltec M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m and heights up to 9.5 meters 1 Making mining safe A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 meters.
More informationScooptram ST2D. Underground diesel loader with 3.6 tonne load capacity
Scooptram ST2D Underground diesel loader with 3.6 tonne load capacity 1 Hardened loader For small and narrow vein mines A parallel boom design matched to an aggressive bucket configuration provides efficient
More informationBoomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2
Boomer E1-DH Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2 1 For power and productivity The Boomer E1-DH rig has extensive coverage areas of
More informationBoomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs
More informationBoomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2
Boomer 281-15 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationBoomer XL3 D face drilling rig
Boomer XL3 D face drilling rig Three-boom tunneling drill rig for large sized underground tunnels and cross sections, with maximum coverage area 178 m 2 1 A giant of high penetration Boomer XL3 D is a
More informationPowerROC T45. Surface drill rig for quarrying and construction Hole diameter: mm( (3" 5")
Surface drill rig for quarrying and construction Hole diameter: 76 127 ( (3" 5") 1 Power built in The gives you high reliability and power worthy its name. Thanks to its compact structure and high manoeuvrability,
More informationBoltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters
Boltec E Fully mechanized rock bolting rig for bolt lengths from 2.4-6 meters, effective in roof heights up to 13 meters 1 Making mining safe Boltec E is a fully mechanized rock bolting rig suitable for
More informationSimba S7. Rugged rig with smart design and increased automation made for tight, tough conditions
Simba S7 Rugged rig with smart design and increased automation made for tight, tough conditions 1 Flexibility, versatility and reliability Maximize productivity in small spaces with the Simba S7. This
More informationSmartROC CL Surface drill rig for open pit mining and selective mining
SmartROC CL Surface drill rig for open pit mining and selective mining Hole diameter: 115 216 mm (4.5 8.5 ) The SmartROC CL is built to beat the rock The fuel-efficient SmartROC CL is one of the most powerful
More informationDiamec PHC range Core drilling rigs
Diamec PH range ore drilling rigs Hole diameter:,, N and H ore drilling rigs that you can depend on The machines in the rugged Diamec PH-series (Pilot Hydraulic ontrol) utilize well-proven technology.
More informationSmartROC D50 and D55 DTH surface drill rig for quarrying and mining
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power
More informationBoomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²
Boomer L2 Hydraulically controlled face drilling rig with a coverage area up to 104 m² 1 Fast and efficient face drilling The Boomer L2 is a powerful hydraulically controlled face drilling rig for mining
More informationChristensen CT20. Surface core drill rig for mineral exploration
Christensen CT20 Surface core drill rig for mineral exploration MODERN DEEP HOLE DRILLING Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck mounted or crawler mounted,
More informationBoomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
Boomer E3/E4 series Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² 1 For power and productivity Face drill rigs in the Boomer E3 and E4 series have
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system 1 The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationBoomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²
Boomer E1/E2 series Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² 1 For power and productivity The Boomer E1 and Boomer E2 rigs have extensive coverage
More informationSmartROC T45 Surface drill rig for quarrying and construction
SmartROC T45 Surface drill rig for quarrying and construction Folding boom hole diameter: 89 127 mm (3,5" 5") Standard boom hole diameter: 89 140 mm (3,5" 5,5") Smart and precise efficiency With the SmartROC
More informationFLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION FIELD
More informationBoomer S2. Robust face drilling rig with a coverage area up to 56 m 2
Boomer S2 Robust face drilling rig with a coverage area up to 56 m 2 1 Robust performace in a small package The Boomer S2 is our smallest mining and tunneling rig with intelligent control, now tougher
More informationFLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½" 5")
FLEXIROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION YEARS OF
More informationScooptram ST7 Battery. Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader
Scooptram ST7 Battery Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader 1 Cutting costs and boosting productivity with smart solutions The
More informationFlexiROC D60/D65 Surface drill rig for quarrying and construction
FlexiROC D60/D65 Surface drill rig for quarrying and construction FlexiROC D60 hole diameter: 110 178 mm (4.3" 7") FlexiROC D65 hole diameter: 110 203 mm (4.3" 8") A rig you can rely on The FlexiROC D60
More informationT50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6
powerroc T50 Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: 102 152mm / 4 6 trustful performer with striking efficiency Everything about
More informationChristensen CT20 Surface core drilling rig for deep hole exploration drilling
hristensen T20 Surface core drilling rig for deep hole exploration drilling ole size:,, and odern deep hole drilling hristensen T20 has a drilling depth capacity of 2 450 meters. The rig comes truck-mounted
More informationScooptram EST1030. Electric underground loader with 10-tonne capacity
Scooptram EST1030 Electric underground loader with 10-tonne capacity 1 Electrically powered to save energy, time and money The Scooptram EST1030 is a fast, electrically powered loader with a 10 tonne capacity
More informationMinetruck MT2200. Articulated underground truck with 22-tonne load capacity
Minetruck MT2200 Articulated underground truck with 22-tonne load capacity 1 Productive and reliable operations Minetruck MT2200 is a high-capacity truck built for fast, efficient underground haulage.
More informationMinetruck MT436LP. Underground truck with 32.6-tonne load capacity
Minetruck MT436LP Underground truck with 32.6-tonne load capacity 1 Reliable underground haulage for low seam operations Minetruck MT436LP is an underground truck with a 32.6-metric tonne load capacity.
More informationMinetruck MT431B. Underground articulated truck with 28.1-metric tonne load capacity
Minetruck MT431B Underground articulated truck with 28.1-metric tonne load capacity 1 Reliable underground haulage Minetruck MT431B is a high speed, articulated underground truck, featuring state-of-the-art
More informationUnigrout Flex M. The flexible grouting system
Unigrout Flex M The flexible grouting system Unigrout Flex M A flexible grouting system Quick and easy to move, the complete Unigrout Flex M system consists of a manually operated grouting platform which
More informationFlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 )
FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 Hole diameter: 64 115 mm (2 1/2 4 1/2 ) FlexiROC T40 Hole diameter: 64 127 mm (2 ½ 5 ) Flexible rigs for all occasions
More informationBoomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²
Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1 Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece
More informationSmartROC C50 Surface drill rig for quarrying, mining and construction
SmartROC C50 Surface drill rig for quarrying, mining and construction Hole diameter: 90 140 mm (3.5 5.5") 1 Speed, power and precision The SmartROC C50 from Epiroc gives you the best of both worlds. The
More informationPowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )
PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction. Hole range: 90 165mm ( 3 9/16 6 1/2 ) Power up your performance The PowerROC D55 is designed according to our philosophy
More informationFLEXIROC T30 R. Construction Edition. Hole diameter: mm (1 3/4 3 1/2 )
FLEXIROC T30 R Construction Edition Hole diameter: 45 89 mm (1 3/4 3 1/2 ) EXTEND YOUR RECH ND VERSTILITY THE FLEXIROC T30 R CONSTRUCTION EDITION IS TOPHMMER RIG DESIGNED FOR WIDE RNGE OF DRILLING PPLICTIONS.
More informationRD20/RD20XC/APL Drill Rigs. Oil and Gas Drilling
RD20/RD20XC/APL Drill Rigs Oil and Gas Drilling 1 The Industry Standard Approximately 300 RD20 s operating worldwide have earned a reputation for reliability, strength and drilling performance. The RD20
More informationSimba M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter
Simba M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 Compact and powerful long-hole drilling solution The sturdy Simba M4 is a
More informationSmartROC T35 & T40 Surface drill rigs for quarrying and construction
SmartROC T35 & T40 Surface drill rigs for quarrying and construction SmartROC T35 hole diameter: 64 115 mm (2.5" 4.5") SmartROC T40 hole diameter: 76 127 mm (3" 5") World champion of fuel efficiency SmartROC
More informationPrecise and flexible production drilling
Simba E7-series Hydraulic long-hole production drill rig for medium to large size drifts, with excellent coverage area and hole range from 51 to 178 mm 1 Precise and flexible production drilling The drill
More informationpowerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying.
powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. Hole diameter : 64 89mm (2 1/2 3 1/2 ) : 64 115mm (2 1/2 4 1/2 ) Power and performance Atlas Copco s
More informationHigh precision solution
Simba M6 Hydraulic production drill rig with I-beam mounted drilling unit for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 High precision solution The sturdy Simba
More informationSERPENT. A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation.
SERPENT A complete ventilation system for successful tunneling and mining operations, including system design, fan station, ducting and installation. CONTROL THE AIR. CONTROL YOUR BUSINESS. THE SERPENT
More informationSMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 )
SMARTROC D60 Surface drill rig for aggregate and limestone quarries, surface mining and construction Hole diameter 110 178 mm (4 5/16 7 ) SMART IS THE NEW ROBUST A SMART DRILLING SOLUTION, BUILT ON A ROBUST
More informationScooptram ST14. Underground loader with 14-tonne capacity
Scooptram ST14 Underground loader with 14-tonne capacity 1 Superior underground mucking The Scooptram ST14 is full with features that makes it powerful and yet fuel efficient and the thorough improvements
More informationUNIGROUT FLEX. The flexible grouting system. Product Catalogue
UNIGROUT FLEX The flexible grouting system Product Catalogue UNIGROUT FLEX THE FLEXIBLE GROUTING SYSTEM UNIGROUT FLEX RANGE OFFERS VERSATILE GROUT PLANTS IN VARIOUS SIZES AND CONFIGURATIONS TO MEET YOUR
More informationScooptram ST7LP. Low-profile underground loader with 6.8-tonne capacity
Scooptram ST7LP Low-profile underground loader with 6.8-tonne capacity 1 Superior productivity in low seam applications The low-profile Scooptram ST7LP with a back height of only 1.6 M is a robust underground
More informationScooptram ST7. Underground small size loader with 6.8-tonne capacity
Scooptram ST7 Underground small size loader with 6.8-tonne capacity 1 The latest technology in narrow vein mining The Scooptram ST7 is a robust loader which is built for demanding underground applications
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationSMARTROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½ 5 )
SMARTROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY With the SmartROC
More informationSMARTROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½ 5 )
SMARTROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY WITH THE SMARTROC T45
More informationSCOOPTRAM ST7 BATTERY
SCOOPTRAM ST7 BATTERY Power Unleashed Delivering unparalleled productivity, Scooptram is the most reliable underground loader on the market. The New Scooptram ST7 is fully battery powered and fully automation
More informationMinetruck MT42. Underground truck with 42-tonne load capacity
Minetruck MT42 Underground truck with 42-tonne load capacity 1 Superior underground haulage Minetruck MT42 is a high speed, 42-metric tonne articulated underground truck, featuring state-of-the-art levels
More informationMinetruck MT54. Underground truck with a load capacity of 54 metric tonnes
Minetruck MT54 Underground truck with a load capacity of 54 metric tonnes 1 Productive high capacity underground haulage Minetruck MT54 is a high-capacity underground truck in a compact design, engineered
More informationThe Predator Drilling Rig. 220,000 lb Hook Load (100,000 kg)
The Predator Drilling Rig 220,000 lb Hook Load (100,000 kg) 1 Insight and innovation The Predator Drilling System is designed to meet the more complex drilling and financial requirements of today s oil
More informationBoomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity
More informationSMARTROC D65. Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining.
SMARTROC D65 Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining. Hole diameter 110 203 mm (4 5/16 8") THE MINING MASTERMIND THE SMARTROC
More informationSCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity
SCOOPTRAM EST1030 Electric underground loader with 10-tonne capacity ELECTRICALLY POWERED TO SAVE ENERGY, TIME AND MONEY THE SCOOPTRAM EST1030 IS A FAST, ELECTRICALLY POWERED LOADER WITH A 10 -TONNE CAPACITY
More informationMEYCO ME3. Concrete Spraying Mobile for medium sized tunnels
MEYCO ME3 Concrete Spraying Mobile for medium sized tunnels VERSATILE CONCRETE SPRAYING APPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE. MAIN BENEFITS
More informationMINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity
MINETRUCK MT431B Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B RELIABLE UNDERGROUND HAULAGE THE MINETRUCK MT431B IS AN ARTICULATED UNDERGROUND TRUCK WITH A 28.1-METRIC
More informationMINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity
MINETRUCK MT5020 Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 FAST, EFFICIENT UNDERGROUND HAULAGE MT5020 IS AN ARTICULATED UNDERGROUND TRUCK WITH 50 METRIC TONNES LOAD CAPACITY.
More informationMINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity
MINETRUCK MT2010 Underground articulated truck with 20-tonne load capacity MINETRUCK MT 2010 COMPACT AND QUICK FOR EFFICIENT HAULAGE MT2010 IS AND ARTICULATED UNDERGROUND TRUCK WITH A LOAD CAPACITY OF
More informationBOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2
BOOMER T Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 PRIME PERFORMANCE PACKED INTO A SMALL, VERSITILE UNIT THE BOOMER T1 D IS AN IDEAL RIG FOR NARROW VEIN
More informationHUK Machine & Company S.A.R.L.
HUK Machine & Company S.A.R.L. Company Profile HUK-Machine & Company S.A.R.L. has been serving Lebanon community since 1997. We specialize in Cutter, Polisher and other Machines. We also have available
More informationSIMINE DRAG. Innovative solutions for maximum productivity and reliability. Mining Technologies
SIMINE DRAG Innovative solutions for maximum productivity and reliability Mining Technologies 3 Lowest cost per ton for material moved Your challenge: In the mining business, our customers are challenged
More informationMEYCO ME5. Mobile concrete spraying for large sized tunnels
MEYCO ME5 Mobile concrete spraying for large sized tunnels DEPENDABLE CONCRETE SPRAYING ACCURATE ECONOMICAL CONCRETE SPRAYER. BETTER THAN EVER Productivity heightened with improved pumping efficiency Accuracy
More informationROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
More informationBOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2
BOOMER S Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 w GROUND-BREAKING PRODUCTIVE DRILLING THE BOOMER S1 IS A FACE DRILLING RIG FOR MINING AND TUNNELLING.
More informationMetso NW Rapid. Crushing & screening plant. Making the big difference to our customers
Metso NW Rapid Crushing & screening plant Making the big difference to our customers Metso NW Rapid Crushing & screening plant At Metso, we are constantly thinking of how to make a big difference in your
More informationTHE DIFFERENCE IS ELECTRIFYING. SANDVIK DD422iE
THE DIFFERENCE IS ELECTRIFYING SANDVIK DD422iE 2 EMISSION-FREE UNDERGROUND DEVELOPMENT Awareness is growing about the potential health impacts of diesel particulate matter (DPM) and other underground engine
More informationROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter
ROBBINS 53RH C Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter SMART IN THE UPS AND DOWNS OF DRILLING THE ROBBINS 53RH C IS A UNIQUE MULTIPURPOSE RAISE DRILL, ABLE TO
More informationTechnology That Transforms. High-Performance Engines For Mining Equipment.
Technology That Transforms. High-Performance Engines For Mining Equipment. Cummins Mining Power. Whether you are mining coal or copper, silver or gold, you ve got to have equipment that you can depend
More informationKeep your trucks moving
Metso Haul Truck Solution Keep your trucks moving Protect your fleet and profitability 2 We help our customers improve operational efficiency, reduce risks and increase profits by utilizing our unique
More informationPowerchip Australia Pty. Ltd. Phone : (03) Fax : (03) Digital Adrenaline For Your BMW X3 3.
Powerchip Australia Pty. Ltd. Phone : (03) 9681 6888 Fax : (03) 9681 6999 sales@powerchipgroup.com Digital Adrenaline For Your BMW X3 3.0d Powerchip technology enhances your BMW to its ultimate level,
More informationSandvik DT series All-around performance
Sandvik DT series All-around performance Focus on absolute excellence RESPONDING TO YOUR TUNNELING CHALLENGES A tunneling project is a race against time and costs. You have to get the project right and
More informationSandvik DI600 Always a hole ahead
Sandvik DI600 Always a hole ahead Enjoy the power and precision EXPERIENCE FOR YOUR BENEFIT As the offspring of the well-known BPI Titon 600, the Sandvik DI600 DTH rigs are a result of 40 years experience
More informationEaser L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m
Easer L Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m Versatile Raiseboring rig Designed to drill opening holes in block cave, sub level caving and sub level stoping mines, this
More informationHydraulic Transverse Cutting Units WS15 - WS150 CUTTING UNITS
Hydraulic Transverse Cutting Units WS15 - WS150 CUTTING UNITS ADVANTAGES OF CUTTING TECHNOLOGY Extremely economic Extremely accurate cut Low vibration Low noise Suitable for underwater operations Low maintenance
More information