AUTOMOTIVE LUBRICANTS

Transcription

1 Table of Contents Page General Application Guide Shell Engine Oils Antifreeze / Coolant Shellzone Rotella ELC Extended Life Coolant Engine Oils Rotella T with XLA (Multigrade) Rotella T Plus Rotella T SB Rotella T Single Grade Shell Fleet FormulaShell Engine Oils Synthetic Mineral and synthetic blend SAE 30 and SAE AUTOMOTIVE Gear Oils Dentax Automotive Gear Oils Spirax HD Gear Oils Dentax S Spirax S Greases Darina XL Albida LC SRS Darina AX Transmission Fluids Donax CFD Donax TG Donax TD and TDL Donax TC Donax TF

2 3.2

3 General Application Guide for Shell Engine Oils Product Rotella T Plus 15W-40 Rotella T with XLA 10W-30 15W-40 Rotella T 10W 20W Rotella T SB Syn. Blend 10W-40 Syn. Blend 0W-30 Syn. Blend 5W % Syn. 0W-40 Shell Fleet 10W-30 15W-40 10W 30 FormulaShell 100% Synthetic 5W-30 10W-30 FormulaShell Synthetic Blend 5W-20 5W-30 10W-30 20W-50 FormulaShell 5W-30 10W-30 10W For Light and Heavy Duty Gasoline Powered Engines * For Heavy Duty Diesel Powered Engines For Light Duty Diesel Powered Engines For Detroit Diesel 2-Cycle Diesel Powered Engines *YOU MUST CONSULT OWNERS MANUAL FOR APPLICATION OF THIS PRODUCT.. For Hydraulics and Ancillaries. 3.3

4 Shellzone Universal Antifreeze / Coolant All-purpose coolant for both heavy-duty and gasolinepowered, liquid-cooled engines Low silicate Low dissolved solids Excellent aluminum corrosion protection Excellent heat transfer properties Superior anti-foam properties GM 1825M GM 1899M ASTM D 3306 ASTM D 4985 Properties SHELLZONE Product Code Specific Gravity, 15.0/15.0 C 1.13 ph 33% solution 10.4 Reserve Alkalinity (ml) 11.3 Freeze Point, 50% solution, C -37 Colour Green 3.4

5 Rotella ELC Extended Life Coolant Heavy-duty diesel engine coolant capable of long life usage Gasoline-powered, liquid-cooled engines 1,000,000 kms or 12,000 hours of service One time use of Rotella ELC Extender at 500,000 kms or 6,000 hours No SCA testing required No SCA containing filters required Reduced volume of used coolant for disposal Rotella ELC / pre-diluted protection to -50 C Approved for/meets requirements of: Caterpillar EC-1, Detroit Diesel, Cummins, Navistar, TMC RP329,ASTM 3306 and ASTM D4985 Product Codes Product Rotella ELC Extended Life Coolant / Concentrate Rotella ELC Extended Life Coolant / Pre-diluted Rotella ELC Extender 3.5

6 Donax TC - Caterpillar TO-4 Fluid A series of premium Caterpillar TO-4 approved fluids. Cat Powershift transmissions with Variable Capacity Torque Convertors (VCTC) Cat hydrostatic transmissions Cat torque convertors, hoists brakes and hydraulic systems Cat final drives Also suitable for use in older Cat equipment NOT to be used as an engine oil Contains an additive system specifically designed for newer Caterpillar transmissions and other drive line components Improved transmission life Superior frictional characteristics and efficiency Suitable for use in older Cat equipment Three single grades (10W, 30, 50) for seasonal flexibility One multigrade (Lowtemp) for all-season use in some components Lowtemp is not fully approved for Cat TO-4, though it uses the same performance additives approved for the TG-4 fluid Formulated for superior antiwear, antifoaming and oxidation stability Single grades are Cat TO-4,TO-2 approved Allison C-3, C-4 3.6

7 Donax TC Caterpillar TO-4 Fluid Properties DONAX TC Grades LOWTEMP 10W Product Code C C Viscosity Index Brookfield Viscosity, cp -15 C , C , C , C 7, HTHS 150 C, cp Pour Point, C

8 Donax TD and TDL - Universal Tractor Fluids Mineral based, heavy duty transmission and hydraulic fluid primarily for use where one oil system supplies the hydraulics, transmission, differential, power takeoff, wet brakes and steering. Off highway farm, construction and forestry equipment Gears, differentials, final drives, transmissions Hydraulic systems Bearings Wet brakes, PTO (power takeoff) clutches TDL is a lighter, low temperature, winter version of Donax TD Improved EP and antiwear for gears and hydraulic pumps Frictional characteristics designed to improve braking, reduce chatter and noise in brakes and provide positive clutch engagement Rust and corrosion protection John Deere J20C (Donax TD), John Deers J20D (Donax TDL) Ford New Holland M2C134D Allison C-4 Recommended for John Deere, Case-International, Ford New Holland, Massey Ferguson,Allis Chalmers, Oliver-White, Kubota,Versatile, Minneapolis-Moline, Deutz-Allis,Agco Properties DONAX Products / Grades TD TDL Product Code C C Viscosity Index Brookfield Viscosity, -20 C 1, C C 59, C ,000 Pour Point, C Flash Point, C

9 Donax TF - Automatic Transmission Fluid (Type F) Automatic transmission fluid meeting Ford s EWSM2C33-F (Type F) Fluid Automatic transmissions of some 1977 and earlier Ford cars and trucks where Type F is specified Other applications where Type F is specified Saab speed transmissions Jaguar (1990/92 Borg-Warner automatic transmissions) Dyed red for identification Ford EWSM2C33-F (Type F) Properties DONAX TF Grades TF Product Code Colour Red 100 C 7.2 Brookfield -18 C 1, C 34,500 Pour Point, C -46 Phosphorous, % mass

10 Donax TG - Automatic Transmission Fluid (ATF) Premium, GM Dexron* and Ford Mercon* automatic transmission fluid. GM passenger car and light duty truck automatic transmissions Where Ford Mercon*,Type CJ and Type H fluids are recommended Heavy duty truck transmissions requiring Allison C-4 or Cat TO-2 Hydrostatic drives in construction equipment Allison V-730 transmissions Hydraulic systems requiring an ISO 32 grade oil where water demulsification is not required Oil flooded rotary screw and vane compressors requiring an ISO 32 Outstanding low temperature performance Frictional characteristics designed to optimize transmission performance Oxidation and corrosion protection Antiwear protection for transmissions and hydraulic systems Detergents and dispersants to improve system cleanliness Compatible with most seal materials and other mineral oils GM Dexron* IIIG Ford Mercon*, ESP 138-CJ, M2C 166-H Allison C-4, Cat TO-2 Spicer transmissions Voith DIWA transmission Meets Vickers 35VQ25 hydraulic pump test Meets Denison HF-1 and HF-2 requirements for hydraulic vane and piston pump Sundstrand hydraulics See our Lubricants Report for a more complete list Properties DONAX TG Product Code Colour 40 C 100 C 7.5 Viscosity Index 200 Brookfield Viscosity, C 1,290 Pour Point, C -45 Flash Point, C

11 Donax CFD 60 - Premier Gear Lubricant for Caterpillar Final Drives/Axles Specifically designed and approved for modern Caterpillar final drives and axles that do not contain friction materials. Provides greater protection and lubrication of severely loaded gears in Caterpillar final drives and axles compared to conventional TO-4 fluids. For applications where friction materials are present Donax TC TO-4 approved lubricants are recommended. NOT recommended for engines, transmissions, hydraulic systems, or final drives and axles that contain friction materials and/or wet brakes. Specifically designed for equipment operating under severe heavy loads. Provides extended life and reduced wear of final drives and axles. Excellent Timken and FZG wear performance Superior oxidation stability and anti-corrosion properties Compatible with Caterpillar seals and Cat.TO-4 lubricants Approved for Caterpillar final drive and axle lubricant specification FD-1 Properties Donax CFD 60 Product Code Viscosity cst (mm2/s) at 40 C 335 cst (mm2/s) at 100 C 25.6 Viscosity Index 98 Density at 15, kg/m 3,897 Pour Point, C -15 Flash Point, C

12 FormulaShell - Engine Oils Mineral and synthetic blend engine oils. Domestic and imported gasoline powered passenger cars and light duty trucks Recommended for Liquified Propane Gas (LPG) and Compressed Natural Gas (CNG) fuelled engines 4-cycle motorcycles in the appropriate viscosity grade All-season performance Synthetic blends provide improved low temperature fast flow characteristics Superior wear protection Maintains excellent engine cleanliness Energy conserving 5W-20, 5W-30 and 10W-30 formulations Special base stocks to provide low oil consumption API SL, SJ (also older SH) 5W-20, 5W-30 and 10W-30 grades exceed ILSAC GF-3 (also ILSAC GF-2) JASO T903 MA Quality 3.12

13 FormulaShell - Engine Oils Properties FormulaShell Engine Oils Grades Synthetic Blend Synthetic Blend Synthetic Blend Synthetic Blend 5W-20 5W-30 10W-30 20W-50 5W-30 10W-30 10W-40 Product Code C C Viscosity Index CCS (cranking), -10 C , C , , C 4,072 5, , Borderline Pumping Temp. (MRV), C Pour Point, C Flash Point, C

14 FormulaShell - 100% Synthetic Engine Oils Premium full synthetic engine oils Domestic, Japanese and European gasoline powered passenger cars and light duty trucks Including high performance and turbocharged gasoline engines Light duty diesel engines requiring a CF engine oil Recommended for Liquified Propane Gas (LPG) and Compressed Natural Gas (CNG) fuelled engines Recommended for Corvette engines All-season use Superior wear protection Excellent engine cleanliness Outstanding high temperature performance Superior low temperature performance Energy conserving Synthetic base oils provide even lower oil consumption API SL (also older SJ) ILSAC GF-3 GM 4718M (Corvette engines) API CF Properties FormulaShell 100% Synthetic Engine Oils Grades 5W-30 10W-30 Product Code C C Viscosity Index CCS -20 C C 3, Borderline Pumping Temp. (MRV), -30 C C 12, Pour Point, C Flash Point, C

15 FormulaShell SAE 30 and SAE Gasoline-powered engines where single grades are specified Small construction equipment 4 stroke lawnmowers Older farm equipment Superior wear protection Maintains excellent engine cleanliness Outstanding high temperature performance Low oil consumption API SL API CD (obsolete) Properties FormulaShell SAE Grade Product Code C C Viscosity Index Pour Point, C

16 Shell Fleet - Heavy Duty Engine Oils Premium engine oils for severe diesel and gasoline service. Moderate and severe service gasoline and diesel mixed fleets On-highway and off-highway, construction, farm, woodland, marine or stationary power plants Naturally aspirated and high output turbocharged and aftercooled diesel engines including the latest low-emission designs High output Cummins, Caterpillar, Detroit Diesel, Navistar and Mack. Transmissions requiring an Allison C-3 / C-4 or Cat CD / TO-2 transmission fluid including Allison Powershift transmissions Hydraulics where water separation is not an issue Ford, GM, Chrysler and other engine builders Soot control -suited for low emission engines where soot related oil thickening is an issue Oxidation / thermal stability control deposits and engine cleanliness Wear protection Base retention neutralizes acids and protects against corrosion Viscosity retention Filterability maintained over the life of the oil Foam control API CH-4, CG-4, CF-4, CF/SJ (15W-40) API CH-4, CG-4, CF-4, CF/SH (10W-30) SAE 30 grade meets CF-2,CF Meets Mack EO-M Plus (15W-40 and 10W-30) Meets Caterpillar SEBU , , Meets Cummins CES (15W-40 and 10W-30) Meets Detroit Diesel Bulletin 7SE270 latest version Volvo VDS (15W-40) 3.16

17 Shell Fleet - Heavy Duty Engine Oils Properties SHELL FLEET Grades 15W-40 10W-30 10W 30 Product Code C C Viscosity Index Pour Point, C CCS Viscosity, cp -20 C 6, C - - 5,814 5, Borderline Pumping Temperature, C TBN- E Sulphated Ash, %wt

18 Rotella T Single Grade Diesel Engine Oils Premium mineral oil, single grade diesel engine oils Heavy-duty 4 stroke diesel engines In appropriate grade, Detroit Diesel 2 stroke diesel engines HD transmissions High temperature piston cleanliness Freedom from turbo-charger deposits Resistance to cylinder bore and ring wear Prevention of low temperature sludge formation API CF (10W and 20W-20 grades) API CF-2, CF (30, 40 and 50 grades) API CC, CD (obsolete) Allison C

19 Rotella T Single Grade Diesel Engine Oils Properties ROTELLA T SINGLE GRADE Grades 10W 20W Product Code C C Viscosity Index Cold Crank C - - 3, C 5, TBN-E Sulphated Ash, % wt Apparent Viscosity (MRV) C 13, C - - 6,

20 Rotella T with XLA - Premium Engine Oils Shell s top-of-the-line engine oil for heavy duty diesel and mixed fleets of diesel and gasoline engines Heavy duty 4 stroke diesel engines Gasoline engines HD Transmissions See Rotella T Single Grade Diesel Engine Oils for most Detroit Diesel 2 stroke engine applications Hydraulic systems where water separation is not needed Pump and compressor crankcases where product rationalization is important Rotella T with XLA has exclusive advanced additive technology with proven Million Mile Oil durability Excellent deposit control Suitable for use in multiple applications to reduce oil inventories Excellent antiwear properties in hydraulic systems API CH-4, CG-4, CF-4,CF API SJ (15W-40) API SH (10W-30) Mack EO-M Plus, EO-M, EO-L Plus Cummins CES 20076, CES Volvo VDS-2 (15W-40) Allison C

21 Rotella T with XLA - Premium Engine Oils Properties ROTELLA T with XLA Grades 15W-40 10W-30 Product Code C C Viscosity Index CCS (cranking), -20 C 6, C - - 5,982 Borderline Pumping, C Pour Point, C Sulphated Residue, % TBN- E

22 Rotella T SB - Premium Engine Oils Synthetic blend versions of Shell s top-of-the-line engine oil for heavy duty diesel and mixed fleets of diesel and gasoline engines. Heavy duty 4 stroke diesel and gasoline engines HD transmissions requiring C-4 fluid Hydraulic systems where water separation is not needed Pump and compressor crankcases where product rationalization is important Improved soot control Excellent low temperature properties Potential fuel economy benefits SB 0W-30:API CH-4, CG-4, CF-4, CF/SJ, Mack E0-M Plus, Cummins CES 20071,Allison C-4 SB 5W-30:API CF,Allison C-4 SB 100% 0W-40:API CG-4, CF-4, CF/SJ,Allison C-4 SB 10W-40:API CH-4, CG-4, CF-4, CF/SJ, Mack EO-M Plus, Cummins CES 20076,Volvo VDS-2,Allison C

23 Rotella T SB - Premium Engine Oils Properties ROTELLA T SB Grades 10W-40 5W-30 0W-30 0W % Syn. Product Code C C Viscosity Index CCS (cranking), -25 C 6, C -- 5, C ,101 4,911 Pour Point, C Sulphated Residue, % MRV -30 C 19, C -- 18, C ,979 15,

24 Rotella T Plus - Premium Engine Oils All the benefits of Rotella T with XLA plus extended service capability. Shell s top-of-the-line engine oil for heavy duty diesel and mixed fleets of diesel and gasoline engines Heavy duty 4 stroke diesel engines Gasoline engines HD Transmissions All the benefits of Rotella T with XLA, as well as: Improved soot handling capability Improved valve train wear Better oxidation stability Higher base number (TBN) for control of crankcase acids Better base number retention Extended Service capability API CH-4, CG-4, CF-4, CF/SJ Mack EO-M Plus, EO-M Cummins CES 20076, CES Volvo VDS-2 Allison C

25 Rotella T Plus - Premium Engine Oils Properties ROTELLA T PLUS Grades 15W-40 Product Code C C 14.0 Viscosity Index 142 CCS (cranking), -20 C 5,720 Borderline Pumping (MRV), C (based on 60,000 cp max.) -32 Pour Point, C -36 Sulphated Residue, % 1.4 TBN- E 10 Flash Point, C

26 Dentax Automotive Gear Oils 1.27 Dentax 80W-90 and 140 are premium, non-ep automotive gear oils designed for manual transmissions specifying straight mineral gear oils meeting API GL-1. Dentax 80W-90 and 140 are straight mineral gear oils designed for use where EP additives are not recommended Usually recommended for non-ferrous gears including spiral bevel, helical and straight gear applications Recommended for tractor transmissions and final drives calling for API GL-1 lubricants Recommended for some manual transmissions, such as Meritor Good oil film strength to protect gears Contains rust and oxidation inhibitors Contains viscosity modifiers to improve low temperature flow characteristics Dentax 80W-90 and 85W-140 meet API GL-1 Properties DENTAX OILS Grades 80W Product Code C Viscosity Index Brookfield Viscosity, -12 C C 100, C Pour Point, C Flash Point, C

27 Spriax HD Automotive Gear Oils Spirax HD oils are premium extreme pressure automotive hypoid gear oils. Spirax HD oils are approved for drive-train gears in heavily loaded equipment and passenger cars Including hypoid, spur, helical, spiral-bevel and worm gears in differentials, manual transmissions, final drives, transfer cases and steering mechanisms Spirax HD 85W-140 is typically used in off-highway applications See Shell Spriax S 75W-90 for extended warranty applications Spirax HD oils contain EP additives for superior load carrying capacity in heavy duty applications Superior thermal and oxidation stability Spirax HD 75W-90 is a semi-synthetic oil for improved low temperature performance and reduced frictional losses for improved fuel economy Spirax HD 80W-90 and 85W-140 meet API GL-4, GL-5, API MT-1, MIL-L-2105D and MIL-PRF-2105E Spirax HD 80W-90 and HD 85W-140 are Mack GO-H and GO-J approved Spirax 75W-90 meets API GL-5 Properties SPIRAX HD GEAR OILS Grades 75W-90 80W-90 85W-140 Product Code C C Viscosity Index Brookfield Viscosity, -12 C C , C 123, Channel Point, C < -45 < -35 < -20 Pour Point, C Flash Point, C

28 Dentax S - 100% Synthetic Heavy Duty Transmission Fluid A premium, 100% synthetic, non EP, manual transmission fluid for extended oil drain warranty programs Manual transmissions and transfer cases of trucks, farm and construction equipment requiring a GL-1 type lubricant Severe service Extended drain / warranty programs All-season operation Outstanding low temperature performance Outstanding winter fuel economy Meets API GL-1 requirements Meets API MT-1 test requirements Eaton-Fuller PS-081 extended warranty program (E250) Eaton-Fuller PS-164 extended warranty program (E500) Meritor 0-81-E extended warranty program Properties DENTAX S Grades SAE 50 Product Code C C 18.2 Viscosity Index 151 Pour Point, C -40 Brookfield Viscosity, cp -30 C 38,

29 Spirax S - 100% Synthetic Heavy Duty Automotive Gear Oil Spirax S is a premium, 100% synthetic, extreme pressure automotive gear oil, approved for Eaton-Fuller and Meritor extended warranty programs. Severe service automotive gear applications Differentials, heavy duty axles, transfer cases, manual transmissions of trucks, farm equipment, automobiles and heavy construction equipment Some industrial gear applications requiring wide temperature capabilities in an ISO 100 or 150 grade Extended drain warranty program approved Full synthetic base oil Excellent wear protection -full automotive EP additive system Outstanding flow at low temperatures All season operation Improved winter fuel economy API GL-5, MT-1 Meritor 0-76-E, 0-76-N Eaton Fuller PS-037 (E250), PS-163 (E500) Mack Truck GO-J, GO-J Plus Dana Corporation,Axle Division MIL-L-2105D MIL-PRF-2105E Properties SPIRAX S Grades 75W-90 Product Code C C 16.6 Viscosity Index 147 Channel -51 C Pass Pour Point, C