Flow Measurement SITRANS F M. Flow sensor MAG /85. Overview

Transcription

1 Siemens AG 2010 low Measurement Overview Design Compact or remote mounting possible Easy plug & play field changeability of transmitter Ex ATEX and M/CSA versions High temperature sensor for applications with temperatures up to 180 C (356 ) Approvals for PTB, OIML R 75 and OIML R 117 Meets EEC directives: PED, 97/23/EC pressure directive for EN flanges Build-in length according to ISO Onsite or factory upgrade to IP68/NEMA 6P of a standard sensor. Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to the velocity of the flow. The MAG 3100 is an electromagnetic flow sensor in a large variety that meets the demands of almost every flow application. Benefits Wide range of sizes: DN 15 to DN 2000 (½ to 78 ) The flexible design is for all applications not covered by the standard industry-specific sensors: MAG 1100, MAG 1100, MAG 3100 P and MAG 5100 W Wide pressure range: PN 6 to PN 100 ANSI Class 150 / 300, AS 2129 / AS 087, JIS K10 and K20. On request up to 690 bar ( psi) Wide range of electrode and liner material to fit even the most extreme process media ully welded construction provides a ruggedness that suits the toughest applications and environments Easy commissioning, the SENSORPROM unit automatically updates settings. Designed to allow patented in-situ verification using the SENSORPROM fingerprints. Application The main applications of the electromagnetic flow sensors can be found in the following fields: Process industry Chemical industry Steel industry Mining Utility Power generation and distribution Oil and gas / HPI Water and waste water Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 and 6000 I. The flexible communication concept USM II simplifies integration and update to a variety of fieldbus systems such as HART, OUNDATION ieldbus H1, DeviceNet, PROIBUS DP and PA, Modbus RTU/RS85. Siemens I /85

2 low Measurement Siemens AG 2010 Pressure-temperature curve to EN (DIN) flanges, material A 105 carbon steel Pressure-temperature curve to EN (DIN) flanges AISI Pressure - Temperature curve to EN (DIN) langes Material A 105 Carbon steel Pressure - Temperature curve to EN (DIN) langes AISI PN bar PN 63 PN 0 PN 25 PN 16 PN 10 PN ºC bar PN 0 PN 25 PN 16 PN ºC Pressure-temperature curve to EN (DIN) flanges AISI 30 Pressure-temperature curve to ANSI B16.5 flanges Pressure - Temperature curve to EN (DIN) lange material AISI Pressure - Temperature curve to ANSI B16.5 flanges bar PN 0 PN 25 PN 16 PN 10 PN ºC psi A 105 Class º A 105 Class 300 AISI 316 Class 150 AISI 30 Class Note: The pressure-temperature curves only assist in the selection of a system. No responsibility is taken for the correctness of the information. or exact data please refer to the PED requirements. /86 Siemens I

3 Siemens AG 2010 low Measurement Technical specifications Version MAG 3100 MAG 3100 HT (High Temperature) Product characteristic lexible product program Process temperature above 150ºC (300º) Nominal size DN DN 2000 (½ ) DN 15 DN 300 (½ ) Measuring principle Electromagnetic induction Electromagnetic induction Excitation frequency (Mains supply: 50 Hz/60 Hz) Process connection langes DN (½ 2½ ): 12.5 Hz/15 Hz DN ( ): 6.25 Hz/7.5 Hz DN ( ): Hz/3.75 Hz DN ( ): Hz/1.875 Hz EN , raised face (EN , DIN 2501 and BS 50 have the same mating dimensions) DN (2½ 78 ): PN 6 (87 psi) DN (8 78 ): PN 10 (15 psi) DN (2½ 78 ): PN 16 (232 psi) DN (8 2 ): PN 25 (362 psi) DN (½ 2 ): PN 0 (580 psi) DN (2 12 ): PN 63 (913 psi) DN (1 12 ): PN 100 (150 psi) ANSI B16.5 (~BS 1560), raised face ½... 2 : Class 150 (20 bar (290 psi)) ½... 2 : Class 300 (50 bar (725 psi)) AWWA C-207, flat face : Class D (10 bar) AS 2129, raised face ½... 8 : Table E AS 087, raised face: PN 16 (DN , 16 bar (232 psi)) PN 21 (DN , 21 bar (30 psi)) PN 35 (DN , 35 bar (508 psi)) JIS B 2220:200 K10 (1"... 2") K20 (1"... 2") Other flanges and pressure ratings on request DN (½ 2½ ): 12.5 Hz/15 Hz DN ( ): 6.25 Hz/7.5 Hz DN ( ): Hz/3.75 Hz EN , raised face (EN , DIN 2501 and BS 50 have the same mating dimensions) DN (½ 12 ): PN 0 (580 psi) DN (2½ 12 ): PN 16 (232 psi) DN (8 12 ): PN 10 (15 psi) DN (8 12 ): PN 25 (362 psi) ANSI B16.5 (~BS 1560), raised face: ½ : Class 150 (20 bar (290 psi)) ½ : Class 300 (50 bar (725 psi)) AS 2129, raised face ½ : Table E Other flanges and pressure ratings on request Rated operation conditions Ambient temperature (conditions also dependent on liner characteristiques) Standard sensor ºC ( ) ºC ( ) Ex sensor ºC (- +10 ) for up to 150 C (302 ) temperature of medium: ºC (- +10 ) for C ( ) temperature of medium: ºC ( ) With compact transmitter - MAG 5000/ ºC (- +10 ) ºC (- +10 ) - MAG 6000 I ºC (- +10 ) ºC (- +10 ) - MAG 6000 I Ex de ºC (1 10 ) ºC (1 10 ) Siemens I /87

4 low Measurement Siemens AG 2010 Version MAG 3100 MAG 3100 HT (High Temperature) Operating pressure [abs. bar] (maximum operating pressure decreases with increasing operating temperature and with stainless steel flanges) Enclosure rating Pressure drop at 3 m/s Test pressure Mechanical load (vibration) Temperature of medium Soft rubber bar ( psi) EPDM bar ( psi) Linatex bar ( psi) Ebonite bar ( psi) PTE -DN 300 ( 12 ): bar ( psi) DN 600 (1 DN 2 ): bar ( psi) PA - DN (½ 6 ): Vacuum bar ( psi) IP67 to EN 60529/NEMA X/6, 1 mh 2 O for 30 min Option: IP68 to EN 60529/NEMA 6P,10 mh 2 O cont. (not for Ex) Hz random in x, y, z, directions for 2 hours according to EN Sensor: 3.17 grms Sensor with compact MAG 5000/ 6000 mounted transmitter: 3.17 grms Sensor with compact MAG 6000 I/ 6000 I Ex mounted transmitter: 1.1 grms Soft rubber C ( ) EPDM C (1 158 ) Linatex (rubber) C ( ) (for temperatures below -20 C (- ) AISI 30 or 316 flanges must be used) Ebonite 0 95 C ( ) PTE C ( ) PA C ( ) As straigth pipe 1.5 x PN (where applicable) PTE Teflon - DN (½ 12 ) (130/180 C (266 /356º)): 0.3/ bar (/ psi) (180 ºC (356 º) PTE has factory mounted grounding SS rings type E and SS terminal box) PA - DN (½ 6 ): Vacuum bar ( psi) IP67 to EN 60529/NEMA X/6, 1 mh 2 O for 30 min Option: IP68 to EN 60529/NEMA 6P,10 mh 2 O cont. (not for Ex) Hz random in x, y, z, directions for 2 hours according to EN Sensor: 3.17 grms Sensor with compact MAG 5000/ 6000 mounted transmitter: 3.17 grms Sensor with compact MAG 6000 I/ 6000 I Ex mounted transmitter: 1.1 grms PTE C ( ) PTE C ( ) actory mounted grounding rings type E in SS and SS terminal box. Can only be used with remote transmitter. PA C ( ) EMC 200/108/EC 200/108/EC Design Weight See dimensional drawings lange and housing material Carbon steel ASTM A 105, with corrosion resistant two component epoxy coating (min. 150 μm) or Carbon steel ASTM A 105, with corrosion resistant two component epoxy coating (min. 150 μm) or AISI 30 (1.301) flanges and carbon steel housing, with corrosion resistant two component epoxy coating (min. 150 μm) or AISI 316 L (1.0) flanges and housing, polished Measuring pipe material AISI 30 (1.301) AISI 30 (1.301) Electrode material AISI 316 Ti (1.571) PTE: Hastelloy C276 PA: Hastelloy C22 Platinum/Iridium, Titanium Tantalum Grounding electrode material Rubber liner: AISI 316Ti or Hastelloy PTE: none PA: optional in Hastelloy, Tantalum or Platinium AISI 30 (1.301) flanges and carbon steel housing, with corrosion resistant two component epoxy coating (min. 150 μm) or AISI 316 L (1.0) flanges and housing, polished AISI 316 Ti (1.571) PTE: Hastelloy C276 PA: Hastelloy C22 Platinum/Iridium, Titanium Tantalum PTE: none PA: optional in Hastelloy, Tantalum or Platinium /88 Siemens I

5 Siemens AG 2010 low Measurement Version MAG 3100 MAG 3100 HT (High Temperature) Design (continued) Terminal box (remote version only) Standard fibre glass reinforced polyamide Standard fibre glass reinforced polyamide (max. 150 C (302 )) Cable entries Option Stainless steel AISI 316 (1.36) Ex Stainless steel AISI 316 (1.36) Remote installation 2 x M20 or 2x½" NPT Compact installation - MAG 5000/MAG 6000: x M20 or x ½ NPT - MAG 6000 I: 2 x M25 or 2 x ½" NPT (for supply/output) - MAG 6000 I Ex de: 2 x M25 or 2 x ½" NPT (for supply/output) Stainless steel AISI 316 (1.36) Ex Stainless steel AISI 316 (1.36) Remote installation 2 x M20 or 2x½" NPT Certificates and approvals Calibration Standard production calibration, Zero-point, 2 x 25 % and 2 x 90 % Zero-point, 2 x 25 % and 2 x 90 % calibration report shipped with sensor Conforms to PED (All EN flanges conforms to PED) 97/23 EC 1) CRN PED (All EN flanges conforms to PED) 97/23 EC 1) CRN Material certificate On request On request EN Ex approvals Ex sensors ATEX 2 GD DN : EEx d e ia IIC T - T6 Drinking water approvals Custody transfer (CT) ( DN2000) (only together with MAG 5000/6000 CT), order as special DN EEx e ia IIC T - T6 M Class 1, Div 1 2) M Class 1, Zone 1 CSA Class 1, Zone 1 IEC Ex de ia IIC T3-T6 Standard sensors M Class 1, Div 2 CSA Class 1, Div 2 EPDM lining: WRAS (WRc, BS6920 cold water, GB) NS/ANSI Standard 61 (Cold water, US) ACS listed () DVGW W270 (D) Belgaqua (B) MCERTS (GB) (EPDM or PTE lining with AISI 316 or Hastelloy electrodes) Cold water pattern approval - DANAK TS , PTB (Denmark and Germany) Heat meter pattern approval - OIML R 75 (Denmark) Hot water pattern approval - PTB (Germany) Other media than water - OIML R 117 (Denmark) Ex sensors ATEX 2 GD DN : EEx d e ia IIC T3 - T6 M Class 1, Div 1 2) M Class 1, Zone 1 CSA Class 1, Zone 1 IEC Ex de ia IIC T3-T6 Standard sensors M Class 1, Div 2 CSA Class 1, Div 2 Heat meter pattern approval - OIML R 75 (Denmark) Hot water pattern approval - PTB (Germany) Technical specification for transmitter - see transmitter pages. 1) or sizes larger than 600 mm (2 ) in PN 16 PED conformity is available as a cost-added option. The basic unit will carry the LVD (Low Voltage Directive) and EMC approval. All products sold outside of EU and ETA are excluded from the Pressure Equipment directive, also products sold into certain market sectors are excluded. These include: a) Meters used in networks for the supply, distribution and discharge of water. b) Meters used in pipelines for the conveyance of any fluid from offshore to onshore. c) Meters used in the extraction of petroleum or gas, including christmas tree and manifold equipment. d) Any meter mounted on a ship or mobile offshore platform. 2) Only with sensors sizes DN ( ½"... 12") compact Siemens I /89

6 low Measurement Siemens AG 2010 Order No. Sensor MAG M E Diameter DN 15 (½ ) (PTE and PA liner) DN 25 (1 ) DN 0 (1½ ) DN 50 (2 ) DN 65 (2½ ) DN 80 (3 ) DN 100 ( ) DN 125 (5 ) DN 150 (6 ) DN 200 (8 ) DN 250 (10 ) DN 300 (12 ) DN 350 (1 ) DN 00 (16 ) DN 50 (18 ) DN 500 (20 ) DN 600 (2 ) DN 700 (28 ) DN 750 (30 ) (AWWA and AS 2129 only) DN 800 (32 ) DN 900 (36 ) DN 1000 (0 ) DN 1050 (2 ) (AWWA only) DN 1100 ( ) (AWWA only) DN 1200 (8 ) DN 100 (5 ) DN 1500 (60 ) DN 1600 (66 ) DN 1800 (72 ) DN 2000 (78 ) lange norm and pressure rating EN PN 6 (DN (2½ )) PN 10 (DN ( )) PN 16 (DN (2½... 8 )) PN 16, non PED (DN ( )) PN 25 (DN ( )) PN 0 (DN (½... 2 )) PN 63 (DN ( )), not PTE or PA PN 100 (DN ( )), not PTE or PA ANSI B16.5 Class 150 (½... 2 ) Class 300 (½... 2 ) AWWA C207 Class D ( ) V 2 D 2 R 2 Y 3 3 M 3 T B H P V 5 D 5 K 5 R 5 Y 6 6 P 6 Y 7 D 7 H 7 M 7 R 7 U 7 V 8 B 8 8 K 8 P 8 T 8 Y AS 2129, table E M 087, PN 16 (DN ( )) N 087, PN 21 (DN ( )) P 087, PN 35 (DN ( )) Q JIS B 2220:200 K10 (1"... 2") K20 (1"... 2") lange material Carbon steel flanges ASTM A Stainless steel flanges, AISI 30 2 Stainless steel flanges and sensor body, AISI 316L, 3 polished A B C D E G H J K L R S Order No. Sensor MAG M E Liner material Soft rubber 1 EPDM 2 PTE (DN 300, PN 50 bar / 12, PN 725 psi), 3 PTE (350 DN 600, PN 0 bar / 1 DN 2, PN 580 psi) Ebonite Linatex (PN 0 bar (580 psi) DN 600 (2 )) 5 PA (DN (½"... 6")) 7 (PN 0 bar (580 psi)) Electrode material (Grounding electrodes not for PTE liner or Pressure PN 100) AISI 316 TI (not for PA) 1 Hastelloy C276 (PA liner: Hastelloy C22) 2 Platinum (DN 300/12") 3 Titanium (not PA liner) Tantalum (DN 600 (2")) 5 Hastelloy C22 incl. grounding electrodes (only PA) 6 Platinium incl. grounding electrodes (only PA) 7 Tantalum incl. grounding electrodes (only PA) 8 Transmitter with display Standard sensor for remote transmitter (Order transmitter A sep.) Ex sensor for remote transmitter (Order transmitter B separately) MAG 6000 I, Alu V DC, V AC C MAG 6000 I Alu V DC, Ex D MAG 6000 I Alu V, Ex E MAG 6000 Polyamide, V DC / 11 2 V AC H MAG 6000, Polyamide, V AC J MAG 5000, Polyamide, V DC / 11 2 V AC K MAG 5000, Polyamide, V AC L Communication No communication, add-on possible A HART B PROIBUS PA Profile 3 (only MAG 6000/MAG 6000 I) PROIBUS DP Profile 3 (not for Ex) G (only MAG 6000/MAG 6000 I) Modbus RTU/RS 85 (not for Ex) E (only MAG 6000/MAG 6000 I) OUNDATION ieldbus H1 J (only MAG 6000/MAG 6000 I) Cable glands/terminal box Metric: Polyamide terminal box or 6000 I compact 1 ½" NPT: Polyamide terminal box or 6000 I compact 2 Metric: SS terminal box (mandatory for Stainless 3 steel MAG 6000 Transmitter) ½" NPT: SS terminal box (mandatory for Stainless steel MAG 6000 Transmitter) Short lead time (details in PMD) Please also see for practical examples of ordering /90 Siemens I

7 Siemens AG 2010 low Measurement Order code Additional information Please add -Z to Order No. and specify Order code(s) and plain text. actory certificate according to EN C1 actory certificate according to EN C15 Tag name plate, stainless steel fixed with SS wire Y17 (add plain text) Tag name plate, plastic (self adhesive) Y18 Customer-specific converter setup Y20 Sensor cables wired (specify cable order no.) Y0 Sensor for remote transmitter's junction box potted to Y1 IP68 with wired cable (specify cable order no.) (not for Ex) Other postproduction requirements (add desired text) Y99 Additional calibrations Matched pair - (Standard production calibration where sensor and transmitter is calibrated together) On request 1) Accredited Siemens low Instruments matched pair On request 1) Calibration acc. to ISO/IEC 17025: 2005 Customer specified calibration up to 10 point On request 1) CT verification and authority seal according to: On request 1) Cold water pattern approval - DANAK TS , PTB (Denmark and Germany) Customer witnessed calibration On request 1) Any of above calibration 1) Ordering On request as dedicated information from the customer on the individual sensors is required. Please fill in the calibration form found on pi.khe.siemens.de/index.aspx?nr=1760 and send together with the order. (Size dependent restriction on maximum flow rates may apply) Operating instructions for MAG 3100 Description Operating instructions for MAG 3100 English German Spanish rench Order No. A5E A5E A5E A5E This device is shipped with a Quick Start guide and a CD containing further SITRANS literature. All literature is also available for free at: Description Order No. Potting kit for terminal box DK-085U0220 of sensors for IP68/NEMA 6P (not for Ex) Short lead time (details in PMD) Please use online Product selector to get latest updates. Product selector link: MAG 5000/6000 transmitters and sensors are packed in separate boxes, the final assembly takes place during installation at the customer's place. MAG 6000 I/MAG 6000 I ATEX 2G D transmitters and sensors are delivered compact mounted from factory. Communication module will be pre-mounted in the transmitter. Siemens I /91

8 low Measurement Siemens AG 2010 Order No. Sensor MAG 3100 HT (High Temperature) 7 M E Diameter DN 15 (½ ) 1 V DN 25 (1 ) 2 D DN 0 (1½ ) 2 R DN 50 (2 ) 2 Y DN 65 (2½ ) 3 DN 80 (3 ) 3 M DN 100 ( ) 3 T DN 125 (5 ) B DN 150 (6 ) H DN 200 (8 ) P DN 250 (10 ) V DN 300 (12 ) 5 D lange norm and pressure rating EN PN 10 (DN ( )) B PN 16 (DN (2½ )) C PN 25 (DN ( )) E PN 0 (DN (½ )) ANSI B16.5 Class 150 (½ ) J Class 300 (½ ) K AS 2129, table E M lange material Carbon steel flanges ASTM A Stainless steel flanges, AISI 30 2 Stainless steel flanges and sensor body, 3 AISI 316L, polished Liner material PTE (130 C (266 )) 2 PTE including type E protection rings AISI (180 C (356 )) PA (150 ºC (302 º)) (DN (½"... 6")) 7 Electrode material AISI 316 TI (not for PA) 1 Hastelloy C276 (PA liner: Hastelloy C22) 2 Platinum 3 Titanium (not for PA) Tantalum 5 Hastelloy C22 incl. grounding electrodes (only PA) 6 Platinium incl. grounding electrodes (only PA) 7 Tantalum incl grounding electrodes (only PA) 8 Transmitter with display Standard sensor for remote transmitter (Order A transmitter separately) Ex sensor for remote transmitter (Order transmitter B separately) MAG 6000 I, Alu V DC, V AC C MAG 6000 I, Alu V DC, Ex D MAG 6000 I, Alu V AC, Ex E MAG 6000, Polyamide, V DC/ H V AC MAG 6000, Polyamide, V AC J MAG 5000, Polyamide, V DC/ K V AC MAG 5000, Polyamide, V AC L Order No. Sensor 7 M E MAG 3100 HT (High Temperature) Communication No communication, add-on possible A HART B PROIBUS PA Profile 3 (only MAG 6000/MAG 6000 I) PROIBUS DP Profile 3 G (only MAG 6000/MAG 6000 I) Modbus RTU/RS 85 E (only MAG 6000/MAG 6000 I) OUNDATION ieldbus H1 J (only MAG 6000/MAG 6000 I) Cable glands/terminal box Metric: Polyamide terminal box or 6000 I compact 1 ½" NPT: Polyamide terminal box or 6000 I compact 2 Metric: SS terminal box (mandatory for Stainless 3 steel MAG 6000 Transmitter) ½" NPT: SS terminal box (mandatory for Stainless steel MAG 6000 Transmitter) This device is shipped with a Quick Start guide and the SITRANS manual CD containing the complete manual library. Printed Operating Instructions are available for purchase via PMD. Order code Additional information Please add -Z to Order No. and specify Order code(s) and plain text. actory certificate according to EN C1 actory certificate according to EN C15 Customer-specific converter setup Y20 Tag name made, stainless steel fixed with SS wire Y17 (add plain text) Tag name plate, plastic (self adhesive) Y18 Sensor cables wired (specify cable order no.) Y0 Sensor for remote transmitter's junction box potted to Y1 IP68 with wired cable (specify cable order no.) (not for Ex) Other postproduction requirements (add desired text) Y99 Additional calibrations Matched pair - (Standard production calibration where On request 1) sensor and transmitter is calibrated together) Accredited Siemens low Instruments matched pair On request 1) Calibration acc. to ISO/IEC 17025: 2005 Customer specified calibration up to 10 point On request 1) CT verification and authority seal according to: On request 1) Cold water pattern approval - DANAK TS , PTB (Denmark and Germany) Customer witnessed calibration On request 1) Any of above calibration 1) Ordering On request as dedicated information from the customer on the individual sensors is required. Please fill in the calibration form found on pi.khe.siemens.de/index.aspx?nr=1760 and send together with the order. (Size dependent restriction on maximum flow rates may apply) /92 Siemens I

9 Siemens AG 2010 low Measurement MAG 3100 and MAG 3100 HT Type C Grounding and protection rings AISI 30 grounding and protection rings type C for all liners except PTE and PA Type C t C DN PN 6 PN 10 PN 16 PN 25 PN 0 AS2129, Table E Order No. Order No. Order No. Order No. Order No. Order No. DN 25 DK-083N8361 DK-083N8361 DN 0 DK-083N8362 DK-083N8362 DN 50 DK-083N83 DK-083N83 DN 65 DK-083N835 DK-083N835 DK-083N835 DK-083N836 DN 80 DK-083N837 DK-083N837 DK-083N837 DK-083N837 DN 100 DK-083N8070 DK-083N8025 DK-083N8025 DK-083N8025 DN 125 DK-083N8071 DK-083N8071 DK-083N8071 DK-083N8071 DN 150 DK-083N8072 DK-083N8008 DK-083N8008 DK-083N8008 DN 200 DK-083N807 DK-083N8011 DK-083N8011 DK-083N8011 DK-083N8075 DK-083N8011 DN 250 DK-083N8078 DK-083N8013 DK-083N8013 DK-083N8013 DK-083N8079 DK-083N8013 DN 300 DK-083N8080 DK-083N8012 DK-083N8012 DK-083N8081 DK-083N8082 DK-083N8012 DN 350 DK-083N8083 DK-083N8039 DK-083N8039 DK-083N808 DK-083N8085 DK-083N8039 DN 00 DK-083N8099 DK-083N8100 DK-083N8100 DK-083N8101 DK-083N8102 DK-083N8100 DN 50 DK-083N8103 DK-083N8103 DK-083N810 DK-083N810 DK-083N8105 DK-083N810 DN 500 DK-083N8107 DK-083N8107 DK-083N8108 DK-083N8108 DK-083N8109 DK-083N8108 DN 600 DK-083N8111 DK-083N8111 DK-083N8112 DK-083N8112 DK-083N8113 DN 700 DK-083N8300 DK-083N829 DK-083N829 DK-083N8372 DN 750 DN 800 DK-083N8303 DK-083N830 DK-083N830 DK-083N8373 DN 900 DK-083N8306 DK-083N8307 DK-083N8307 DK-083N8396 DN 1000 DK-083N8309 DK-083N8310 DK-083N8310 DK-083N8397 DN 1100 DK-083N8367 DK-083N8367 DK-083N8367 DN 1200 DK-083N8312 DK-083N8313 DK-083N8313 DK-083N8398 DN 100 DK-083N867 DK-083N868 DK-083N869 DN 1500 DK-083N871 DK-083N872 DK-083N873 DN 1600 DK-083N875 DK-083N876 DK-083N877 DN 1800 DK-083N879 DK-083N880 DK-083N881 DN 2000 DK-083N883 DK-083N88 DK-083N885 Size ANSI Class 150 Class 300 JIS K10 JIS K20 Order No. Order No. Order No. Order No. 1 DK-083N8361 DK-083N8361 DK-083N8361 DK-083N8361 1½ DK-083N8362 DK-083N8362 DK-083N8362 DK-083N DK-083N83 DK-083N83 DK-083N83 DK-083N83 2½ DK-083N835 DK-083N835 DK-083N835 DK-083N835 3 DK-083N837 DK-083N837 DK-083N837 DK-083N837 DK-083N8025 DK-083N8025 DK-083N8070 DK-083N DK-083N8071 DK-083N8071 DK-083N8071 DK-083N DK-083N8008 DK-083N8073 DK-083N8008 DK-083N DK-083N8011 DK-083N8076 DK-083N8011 DK-083N DK-083N8013 DK-083N8079 DK-083N8013 DK-083N DK-083N8012 DK-083N8082 DK-083N8012 DK-083N DK-083N8039 DK-083N8085 DK-083N8083 DK-083N DK-083N8100 DK-083N8102 DK-083N8100 DK-083N DK-083N810 DK-083N8106 DK-083N8103 DK-083N DK-083N8107 DK-083N8110 DK-083N8107 DK-083N DK-083N8113 DK-083N811 DK-083N8111 DK-083N8112 Size AWWA C207 Order No. 28 DK-083N DK-083N DK-083N DK-083N DK-083N DK-083N839 DK-083N DK-083N831 5 DK-083N DK-083N87 66 DK-083N DK-083N DK-083N886 Siemens I /93

10 low Measurement Siemens AG 2010 MAG 3100 and 3100 HT Type E grounding and protection ring 1 pc. AISI 316 grounding and protection rings type E for PTE liners Note: or MAG 3100 HT High temperature version 7ME for PTE 180 C versions. - grounding ring type E is included and factory mounted. Type E t E DN PN 6 PN 10 PN 16 PN 25 PN 0 Order No. Order No. Order No. Order No. Order No. DN 15 DK-083N8365 DN 25 DK-083N8271 DN 0 DK-083N8278 DN 50 DK-083N8282 DN 65 DK-083N828 DK-083N8285 DK-083N8286 DN 80 DK-083N8288 DK-083N8289 DK-083N8290 DN 100 DK-083N8116 DK-083N8117 DK-083N8118 DN 125 DK-083N8120 DK-083N8121 DK-083N8122 DN 150 DK-083N812 DK-083N8125 DK-083N8126 DN 200 DK-083N8129 DK-083N8130 DK-083N8130 DK-083N8131 DK-083N8132 DN 250 DK-083N8135 DK-083N8136 DK-083N8137 DK-083N8138 DK-083N8139 DN 300 DK-083N81 DK-083N81 DK-083N815 DK-083N816 DK-083N817 DN 350 DK-083N8152 DK-083N8153 DK-083N815 DK-083N8155 DK-083N8156 DN 00 DK-083N8160 DK-083N8161 DK-083N8162 DK-083N8163 DK-083N816 DN 50 DK-083N8168 DK-083N8169 DK-083N8170 DK-083N8171 DK-083N8172 DN 500 DK-083N8177 DK-083N8178 DK-083N8179 DK-083N8180 DK-083N8181 DN 600 DK-083N8186 DK-083N8187 DK-083N8188 DK-083N8189 Protection of PTE liner use 2 pcs. Earthing of PTE lined flowmeter use 1 pc. Size ANSI Class 150 Class 300 JIS K10 JIS K20 Order No. Order No. Order No. Order No. ½ DK-083N8365 DK-083N DK-083N8272 DK-083N8272 DK-083N8271 DK-083N8271 1½ DK-083N8279 DK-083N8279 DK-083N8278 DK-083N DK-083N8283 DK-083N8283 DK-083N8282 DK-083N8282 2½ DK-083N8287 DK-083N8287 DK-083N8285 DK-083N DK-083N8291 DK-083N8292 DK-083N8288 DK-083N8289 DK-083N8118 DK-083N8119 DK-083N8116 DK-083N DK-083N8122 DK-083N8123 DK-083N8121 DK-083N DK-083N8126 DK-083N8127 DK-083N8125 DK-083N DK-083N8370 DK-083N8133 DK-083N8130 DK-083N DK-083N810 DK-083N811 DK-083N8137 DK-083N DK-083N818 DK-083N819 DK-083N81 DK-083N816 1 DK-083N8157 DK-083N8158 DK-083N8152 DK-083N DK-083N8165 DK-083N8166 DK-083N8161 DK-083N DK-083N8173 DK-083N817 DK-083N8169 DK-083N DK-083N8182 DK-083N8183 DK-083N8178 DK-083N DK-083N8190 DK-083N8191 DK-083N8187 DK-083N8189 Protection of PTE liner use 2 pcs. Grounding of PTE lined flowmeter use 1 pc. AS2129, Table E DN DN 15 DN 25 DN 0 DN 50 DN 65 DN 80 DN 100 DN 125 DN 150 DN 200 DN 250 DN 300 DN 350 DN 00 DN 50 DN 500 DN 600 Protection of PTE liner use 2 pcs. Grounding of PTE lined flowmeter use 1 pcs. Order No. DK-083N8365 DK-083N8272 DK-083N8280 DK-083N8281 DK-083N828 DK-083N8293 DK-083N8117 DK-083N8121 DK-083N8128 DK-083N813 DK-083N813 DK-083N8151 DK-083N8153 DK-083N8161 DK-083N8176 DK-083N8185 DK-083N8193 /9 Siemens I

11 Siemens AG 2010 low Measurement MAG 3100 and MAG 3100 HT type E grounding and protecting ring 1 pc. Hastelloy C276 grounding and protection ring type E for PTE liners Type E t E DN PN 6 PN 16 PN 0 Size ANSI Class 150 Class 300 Order No. Order No. Order No. Order No. Order No. DN 15 DK-083N887 ½ DK-083N887 DK-083N887 DN 25 DK-083N888 1 DK-083N889 DK-083N889 DN 0 DK-083N890 1½ DK-083N891 DK-083N891 DN 50 DK-083N892 2 DK-083N893 DK-083N893 DN 65 DK-083N89 DK-083N895 DK-083N896 2½ DK-083N897 DK-083N897 DN 80 DK-083N898 DK-083N899 DK-083N DK-083N8501 DK-083N8502 DN 100 DK-083N8503 DK-083N850 DK-083N8505 DK-083N8506 DK-083N8507 MAG 3100 and MAG 3100 HT Grounding rings: lat rings 1 pc. AISI 316 grounding flat ring for all liners (PTE max. 130 ºC) t t = 2 mm (0.08 inch) DN PN 10 PN 16 PN 0 Size ANSI Class 150 Class 300 Order No. Order No. Order No. Order No. Order No. DN 15 A5E ) ½ A5E ) DN 25 A5E ) 1 A5E ) A5E ) DN 0 A5E ) 1½ A5E ) DN 50 A5E ) 2 A5E ) A5E ) DN 65 A5E ) A5E ) 2½ A5E ) DN 80 A5E ) A5E ) 3 A5E ) A5E ) DN 100 A5E ) A5E ) A5E ) A5E ) DN 125 A5E ) A5E ) 5 A5E ) DN 150 A5E ) A5E ) 6 A5E ) DN 200 A5E ) A5E ) A5E ) 8 A5E ) DN 250 A5E ) A5E ) A5E ) 10 A5E ) DN 300 A5E ) A5E ) A5E ) 12 A5E ) ) Subject to export regulations AL: 9I999, ECCN: N. Siemens I /95

12 low Measurement Siemens AG 2010 MAG 3100 and MAG 3100 HT Grounding rings : lat rings 1 pc. Hastelloy C276 grounding flat ring for all liners (PTE max. 130 ºC) t t = 2 mm (0.08 inch) DN PN 10 PN 16 PN 0 Size ANSI Class 150 Class 300 Order No. Order No. Order No. Order No. Order No. DN 15 A5E ) ½ A5E ) DN 25 A5E ) 1 A5E ) A5E ) DN 0 A5E ) 1½ A5E ) DN 50 A5E ) 2 A5E ) A5E ) DN 65 A5E ) A5E ) 2½ A5E ) DN 80 A5E ) A5E ) 3 A5E ) A5E ) DN 100 A5E ) A5E ) A5E ) A5E ) DN 125 A5E ) A5E ) 5 A5E ) DN 150 A5E ) A5E ) 6 A5E ) DN 200 A5E ) A5E ) A5E ) 8 A5E ) DN 250 A5E ) A5E ) A5E ) 10 A5E ) DN 300 A5E ) A5E ) A5E ) 12 A5E ) MAG 3100 and MAG 3100 HT Grounding rings : lat rings 1 pc. Tantalum grounding flat ring for all liners (PTE max. 130 ºC) t t = 2 mm (0.08 inch) DN PN 16 PN 0 Size ANSI Class 150 Class 300 Order No. Order No. Order No. Order No. DN 15 A5E ) ½ A5E ) DN 25 A5E ) 1 A5E ) A5E ) DN 0 A5E ) 1½ A5E ) DN 50 A5E ) 2 A5E ) A5E ) DN 65 A5E ) A5E ) 2½ A5E ) DN 80 A5E ) A5E ) 3 A5E ) A5E ) DN 100 A5E ) A5E ) A5E ) A5E ) ) Subject to export regulations AL: 9I999, ECCN: N. /96 Siemens I

13 Siemens AG 2010 low Measurement Dimensional drawings MAG 3100 and MAG 3100 HT sensor with compact or remote transmitter 131 (5.16) 155 (6.10) 218 (8.58) 208 (8.19) 131 (5.16) 2 x M25 M20 (½"NPT) A1 A 2 D 1 A D 1 B L T E T C D B L T E T C Dimensions in mm (inch) Metric DN A 1) A 1 /A 8) 2 B D 1 L 2) EN ANSI 16.5 PN 6, 10 PN 16/ PN 16 PN PN PN PN Class Class non PED [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] / / ) ) 272 1) / / / / / / / / / / / / / / / / / / / / / / / / ) Not according to ISO Siemens I /97

14 low Measurement Siemens AG 2010 DN L 2) 3) T C 3) T E 3) T 3) T T Wgt. ) AS 2129 E AWWA JIS K10 JIS K20 AS 087 PN 16, 21, 35 C-207 Class D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] ) ) ) ) ) ) ) ) ) ) ) ) ) 1.5 mm shorter with AISI terminal box (Ex and high temperature version) 2) When earthing flanges are used, the thickness of the earthing flange must be added to the built-in length 3) T C = Type C grounding ring, T E = Type E grounding ring (Included and factory mounted on high temperature 180 C (356 ) PTE sensor), T = lat type grounding rings ) Weights are approx. (for PN 16) without transmitter 5) PN 35 DN 80 = 272 mm (not according to ISO 13359) 6) PN 35 DN 500 = 680 mm 7) PN 35 DN 600 = 750 mm 8) A 2 is 3 mm shorter than A 1 9) Not AS 087 PN 21 or PN 35 10) Size is out to ISO not available D = Outside diameter of flange, see flange tables /98 Siemens I

15 Siemens AG 2010 low Measurement MAG 3100 and MAG 3100 HT sensor with compact or remote transmitter Imperial Size A 1) A 1 /A 8) 2 B D 1 L 2) EN ANSI 16.5 PN 6, 10 PN 16/ PN 16 non PED [in.] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] ½ ½ ½ / / ) ) ) / / / / / / / / / / / / / / / / / / / / / / / / PN 25 PN 0 PN 63 PN 100 Class 150 Class 300 1) Not according to ISO Siemens I /99

16 low Measurement Siemens AG 2010 Size L 2) T C 3) AS 2129 E AS 087 PN 16, 21, 35 AWWA C-207 Class D JIS K10 JIS K20 T E 3) T 3) T T 3) Wgt. ) [in.] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [inch] [lb] ½ ½ ½ ) ) ) ) inch shorter with AISI terminal box (Ex and high temperature version) 2) When earthing flanges are used, the thickness of the earthing flange must be added to the built-in length 3) T C = Type C grounding ring, T E = Type E grounding ring (Included and factory mounted on high temperature 180 C (356 ) PTE sensor), T = lat type grounding rings ) Weights are for ANSI 150 without transmitter 5) PN 35 DN 80 = inch 6) PN 35 DN 500 = inch 7) PN 35 DN 600 = inch 8) A 2 is 0.06 inch shorter than A 1 - not available D = Outside diameter of flange, see flange tables /100 Siemens I