plates and with flexible conduit. Ø Outlet (mm)
|
|
- Harriet Franklin
- 5 years ago
- Views:
Transcription
1 SELF-ADJUSTING VALVES BAR ALIZE Self-adjusting exhaust valves Wide range of self-adjusting exhaust valves, manufactured from injection moulded white polystyrene. Designed for kitchen, bathrooms and toilet ventilation applications, they are available either for one fixed air volume or for dual air volume. Versions: plates and with flexible conduit Valves with 3-claw mounting connector To mount the connector to the valve only it is necessary to push it. Ø Outlet (mm) Valves with duct mounting connector with rubber seal Ø Outlet (mm) BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ BARP BARJ s with 2 flows. In the two-flow extraction valves, maximum extraction flow is obtained by pulling the cord. Maximum opening is achieved for a fixed time of 30 minutes. 15/30 20/75 30/90 45/105 45/120 45/135 Valves with 3-claw mounting connector Ø Outlet (mm) Valves with duct mounting connector with rubber seal Ø Outlet (mm) BARP 15/ BARJ 15/ BARP 20/ BARJ 20/ BARP 30/ BARJ 30/ BARP 45/ BARJ 45/ BARP 45/ BARJ 45/ BARP 45/ BARJ 45/ Dimensiones (mm) BARP Ø 125 BARJ Ø 125 Extraction opening 3-claw mounting connector Extraction opening Mounting connector 846
2 SELF-ADJUSTING VALVES Components Ø 170 Regulation module 4 Additional air volume pull cord 5 Cord 3 1 Connector 2 Flap indicating additional air volume 3 Removable louvre grille Self-adjusting exhaust valves accessories MNGJ 99 Connector Ø 99 with gasket for BAR (except for double flow valves and models ). L: 45 mm MNGJ 125 Connector Ø 125 with gasket. L: 45 mm ANGULO ALIZE Return angle guide Ceiling instalation will require the return angle fitting for pull cord guidance. MNGP 100 Connector Ø 100 or Ø 125 with anchoring supports for Pladur. (except for double flow valves and models ). L: 100 mm MNGP 125 Connector Ø 100 or Ø 125 with anchoring supports for Pladur. L:100 mm MNGP 80 Connector Ø 80 with anchoring supports for Pladur. L: 100 mm MIA Sound attenuator module Except models from 75 to 150 m 3 /h). Made of melamine foam fitted on a polystyrene support, the MIA module reduces noise transmission (Dn,e,w). Installation The MIA is fitted on the back part of the exhaust valve BAR. Noise attenuation without MIA. Noise attenuation with MIA. 124 mm Sound attenuator accessory Plastic connector with gasket and basotect foam. Only valves for Ø 125 AAC - Installation 100 mm 847
3 SELF-ADJUSTING VALVES Noise attenuation without MIA Lw en db(a) Dn,e,w (ctr) (db) 70 Pa 100 Pa 130 Pa 160 Pa Lw en db(a) Dn,e,w (ctr) (db) 70 Pa 100 Pa 130 Pa 160 Pa 15/ / / / / / Technical characteristics (PV CSTB and and test reports CETIAT nº ) 200 ALIZE ALIZE ALIZE ALIZE 122 ALIZE 115 ALIZE 100 Air flow m 3 /h 100 ALIZE 90 ALIZE 75 ALIZE 60 Air flow m 3 /h 100 ALIZE 87 ALIZE 72 ALIZE ALIZE ALIZE 30 ALIZE Pressure in Pa Pressure in Pa m 3 /h 45/135 m 3 /h 45/120 m 3 /h 45/105 m 3 /h 30/90 m 3 /h 20/75 m 3 /h 45/135 m 3 /h 30/90 m 3 /h 20/75 m 3 /h 15/30 m 3 /h Nominal airflow Max. airflow Pressure in Pa 848
4 HUMIDITY-ADJUSTABLE VALVES ALIZE BEH Humidity-adjustable exhaust valves Humidity-adjustable exhaust valves made of white polystyrene, to control the airflow according to humidity or air pollution inside detached houses, flats or commercial premises. In houses, these inlets will be connected to an extractor network. There are timed (30 minutes) humidity-adjustable versions, manual, electric or with a presence detector. They have a clamp-type connector. s Humidityadjustable Timer Presence detector Electrical Q Min HIGRO Q Max HIGRO Q Additional Ø Connection BEHT 15/ BEHT 15/ BEHT 15/ BEHT/E 10-45/ BEHT/DP 7,5/ , BEHT/DP 7,5/ , BEHC 6/40/ BEHC 12/45/ BEHC 10/45/ BEHC 10/45/ BEHC/E 6/40/ BEHC/E 12/45/ BEHC/E 10/45/ BEHC/E 10/45/ BEHW/DP 5/ Technical characteristics m 3 /h HR % Dimensions (mm) Acoustic characteristics s 100 Pa 130 Pa 160 Pa BEHT 15/ BEHT 15/ BEHC 6/40/ BEHC 12/45/ BEHC 10/45/ BEHC 10/45/ BEHC/E 6/40/ BEHC/E 12/45/ BEHC/E 10/45/ BEHC/E 10/45/ BEHT/E 10-45/ BEHW/DP 5/30-80 < 20 < BEHT/DP 7,5/ BEHT/DP 7,5/ Lw: Sound level measured at the valve Acoustic accesories 124 mm INSTALLATION Other accessories BEHW/DP BEHT - BEHC/E BEHT/E - BEHT/DP 100 mm ANGULO ALIZE Angle changer Angle changer for inlets with a cord installed in the ceiling. Enables the cord to be guided along the wall with the BEHC and BEHW manual control inlets AAC Made of melamine foam, fitted behind the inlet. Only valves Ø
5 ø78 EXHAUST AND/OR SUPPLY VALVES BOCP Plastic exhaust valves Plastic exhaust valves manufactured from injection moulded white polypropylene plastic. Used for extraction in VMC simple or double flow installations. Can be fitted: The clamping sleeve, made of plastic, has three securing clamps. A gasket ensures securing to the duct as well as sealing. Ø (mm) Connector BOCP AT claw mounting connector BOCP AT claw mounting connector Dimensions (mm) A B D1 D2 H BOCP BOCP BOAP Plastic exhaust valves Plastic exhaust valves manufactured from injection moulded white polypropylene plastic. Used for extraction in simple or double flow VMC installations. Clamp inlet (BOAP). The clamp sleeve, made of plastic, has 3 securing clamps. Ø (mm) Connector BOAP HT claw mounting connector BOAP HT claw mounting connector Dimensions (mm) A A A BOAP BOAP A 60 A ø122 BOAP 80 BOAP
6 EXHAUST AND/OR SUPPLY VALVES BDOP Exhaust / supply valves White plastic valves used in extraction or blowing and in single flow or double flow VMC installations. When blowing, the direction and the distance of the airflow can be adjusted. It can be fitted with a flow regulator. Ø Outlet (mm) Connector BDOP Height 100 mm - 3-claw mounting connector BDOP Height 100 mm - 3-claw mounting connector Dimensions (mm) D A B D H BDOP BDOP H B A BOR Interior air exhaust valve White polystyrene air exhaust valves for dwelling and commercial applications. All models offer an adjustable central valve to regulate the airflow. They can be used in heating, air conditioning and ventilation systems. Operation range from 40 to 150 Pa. The central mobile shutter can be used to control the airflow by utilising a central adjustment screw. Versions: Adjustable inlets with a clamp for installation in Pladur BOR-P Ø Duct Pladur anchoring connector Joint connector diameter (m (mm) /h) BORP 80 BORJ BORP 100 BORJ BORP 125 BORJ BORP 160 BORJ BORP 200 BORJ
7 EXHAUST AND/OR SUPPLY VALVES Dimensions (mm) H ØD1 ØD2 ØA2 H2 ØA1 ØB1 H1 BOR valve ØB2 BORP Pladur anchoring connector BORJ Air characteristics and dimensions (mm) ØD1 ØD2 ØH ØA1 ØB1 ØH1 ØA2 ØB2 ØH2 BOR BOR BOR BOR BOR Technical characteristics (PV CSTB and and test reports CETIAT nº ) BOR 80 BOR 100 Supply air Supply air Pressure loss in Pa Extract air Pressure loss in Pa Extract air Ariflow in m 3 /h Ariflow in m 3 /h BOR 125 BOR 160 Pressure loss in Pa Supply air Extract air Pressure loss in Pa Supply air Extract air BOR 200 Ariflow in m 3 /h Ariflow in m 3 /h Supply air Pressure loss in Pa Extract air Ariflow in m 3 /h 852
8 EXHAUST AND/OR SUPPLY VALVES BIR Supply valves Outlets entirely made of sheet steel coated in white epoxy paint. Consists of a blowing cone, a mobile central shutter enabling the air jet to be adjusted and its direction guided and a rubber gasket that ensures it is secured and sealed, which can resist a continuous temperature of -20 C to 120 C. Used for injecting air in commercial accommodation and premises, ceiling-fitted. Range of use from 50 to 150 Pa. The outlet comes with a galvanized steel connector to facilitate installation. Technical characteristics and dimensions (mm) Ø Dimensions (mm) D1 (mm) D2 (mm) H (mm) BIR BIR BIR BIR Performance curves These graphs show the flow-pressure curves of the BIR outlets as well as their Lw noise production expressed in db (A). The figures at the top indicate the adjustment amount. Adjustment R BIR 100 BIR 125 Pressure difference in Pa in m 3 /h Pressure difference in Pa in m 3 /h BIR 160 BIR 200 Pressure difference in Pa in m 3 /h Pressure difference in Pa in m 3 /h 853
9 EXHAUST AND/OR SUPPLY VALVES BOC Interior air exhaust valve Interior air exhaust valves for dwelling and commercial applications. All models offer an adjustable central valve to regulate the airflow. They can be used in heating, air conditioning and ventilation systems. ØB L1 ØA ØE ØC L Ø A Ø B Ø C Ø D Ø E L BOC BOC BOC BOC (Pa) 200 B O C ( m m ) 200 (Pa) B O C ( m m ) ( m 3 / h ) ( m 3 / h ) (Pa) B O C ( m m ) (Pa) B O C ( m m ) ( m 3 / h ) ( m 3 / h )
10 EXHAUST AND/OR SUPPLY VALVES: ACCESSORIES RD Air volume regulators Air volume regulators fitted within a duct to maintain a constant air volume within a pressure range from 50 to 200 Pa, manufactured from flame retardant (M1) plastic. Can be installed: 3 /h). RD 80/15 15 RD 80/30 30 RD 80/45 45 RD 100/15 15 RD 100/30 30 RD 100/45 45 RD 100/50 50 RD 100/60 60 RD 100/75 75 RD 100/90 90 RD 125/15 15 RD 125/30 30 RD 125/45 45 RD 125/60 60 RD 125/75 75 RD 125/90 90 RD 125/ RD 160/ RD 160/ RD 160/ RD 160/ RD 160/ RD 160/ RD 160/ RD-200/ RD-200/ RD-200/ RD-200/ RD-200/ RD-200/ RD-200/ RD-250/ RD-250/ RD-250/ RD-250/ RD-250/ RD-250/ RD-250/ RD 125/ RD-200/ RD-250/ RD 125/ RD-250/ Dimensions (mm) Manufactured from flame retardant (M1) plastic with working temperature up to 60ºC. D1 1 2 D1 L 3 Regulators RD Ø 80 a Ø 100 Ø (mm) D1 (mm) D2 (mm) L (1) ExtBrush seal (2) Regulator casing (3) Flap D1 1 D1 2 Regulators RD Ø 125 a Ø 250 Ø (mm) D1 (mm) D2 (mm) L L (1) ExtBrush seal (2) Regulator casing (3) Flap 855
11 EXHAUST AND/OR SUPPLY VALVES: ACCESSORIES Installation The air volume regulators are mounted inside vertical and horizontal ducting by simple interlocking. In a horizontal conduit, "BAS" (bottom) indicated at the front of the regulator. An external brush seal provides airtightness. When the regulator is fitted to an inlet, the minimum distance between the inlet and the regulator must be the same as the diameter for extraction and three times the diameter for blowing. It is important to respect the air flow direction shown on the connector. 3 x D Air volume regulator in supply air operation 1 x D Air volume regulator in extract air operation Performance curves The curves show the air volume variations in m 3 /h in relation with the pressure in Pascals. Q Q DP (Pa) DP (Pa) Acoustic characteristics The values shown in the following chart are sound power level Lw in db(a) 50 Pa 100 Pa 150 Pa 200 Pa Lw in db(a) 50 Pa 100 Pa 150 Pa 200 Pa
12 EXHAUST AND/OR SUPPLY VALVES: ACCESSORIES IRIS Iris-damper Complete range of dampers enabling to measured and regulate air volume in a circular duct system. Manufactured from galvanised sheet steel they incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. Performance curves Ø d Ø D L A Weight (Kg) IRIS ,5 IRIS ,5 IRIS ,7 IRIS ,9 IRIS ,4 IRIS ,1 IRIS ,5 IRIS ,4 IRIS ,6 IRIS ,6 IRIS ,0 IRIS-80 IRIS-100 IRIS
13 EXHAUST AND/OR SUPPLY VALVES: ACCESSORIES IRIS-160 IRIS-250 IRIS-315 IRIS-400 IRIS-500 IRIS
14 EXHAUST AND/OR SUPPLY VALVES: ACCESSORIES IRIS-630 IRIS-800 MPC Flow detector A B C D E F G H MPC MPC-500/ MPC-500/ MPC MPC MPC Flow detectors designed to correctly measure pressures at the inlet of Series TD devices unaffected by airflow A B C D E MPC MPC
TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans
IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).
More informationUltra-quiet circular duct fans TD-SILENT ECOWATT Series
TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan
More informationACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
More informationVENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
More informationACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box
ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All
More informationEDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc
AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 Ceiling or wall mounting extract ventilation Extract ventilation through wall or using a shunt duct system All V models incorporate all accessories
More informationTD-ECOWATT AND DECOR-ECOWATT Series
S&P presents its new ranges of domestic and commercial fans with DC motors TD-ECOWATT AND DECOR-ECOWATT Series Up to 55% savings in energy consumption Reduced CO 2 emissions Improvement of the environment
More informationCENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationEDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM
AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 0 015982 603071 Installation examples Ceiling or wall mounting Extract ventilation through short duc extract ventilation Extract ventilation
More informationBATHROOM EXTRACT FANS DECOR-100 Series
DECOR-1 Series Range of axial extractors with airflow rates of 1 m 3 /h, for connection to 1 mm diameter circular ducting. All the fans are manufactured from injection moulded plastic, fitted with neon
More informationMVF S.r.l. Via San Giovanni Bosco, Alessandria Tel Fax Web:
MV S.r.l. Via San Giovanni osco, 12-15121 Alessandria Tel. +39 131 68.73 - ax +39 131 56.334 Web: www.mvf.it -mail: info@mvf.it IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series TD-SILNT - MOD 16 TO
More informationTD-SILENT Series (160 to 1000 models)
IN-LINE MIXED LOW DUT ANS ultra-quiet Series (1 to models) Low profile Mixed-flow fans with sound-absorbent insulation. Extremely quiet. ertified of Approval Noise Abatement Society (TD-3, TD-, TD-8 and
More informationAcoustic humidity sensitive air inlet. Technical specifications
Acoustic humidity sensitive air inlet Technical specifications Copyright Aereco. Data and pictures not contractual. Some characteristics may vary. Aereco S.A keeps the right to modify any characteristic
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More informationROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for
More informationCRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS
ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire
More informationBap SI. Self-balanced grilles Full range of single and double airflow grilles from 15 to 150 m 3 /h for residential housing and commercial premises
Self-balanced grilles Full range of single and double airflow grilles from 15 to 150 m 3 /h f residential housing and commercial premises Bap SI Selection guide Description Advantages Construction Range
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationMIXVENT-TH Series Mixed Flow Fans
ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans 0 021682 603075 P P L I T I O N S Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured
More informationKSOM Control exhaust valve
KSOM Control exhaust valve KSOM is ideal for rooms which require forced exhaust air flow. KSOM consists of exhaust valve, control motor and controller card, which are installed in the valve cone. KSOM
More informationCGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
More informationCMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C
BACKWARD CURVED CENTRIFUGAL FANS CMRT Series 80 C Continuous operation Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC. Casings are manufactured
More informationROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
MIXVENT-TH ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength
More informationAcoustic Twin Fans (ATQ)
Acoustic Twin Fans (ATQ) Features and Benefits Available in sizes from 100 to 500mm dia 50mm Acoustically treated housing, Class O rated, self extinguishing, zero burn rate, resists ignition, no toxic
More informationCGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More informationNozzle diffuser DYRH / Supply air unit DYRB (=DYRH+ATTD)
Nozzle diffuser DYRH / Supply air unit DYRB (=DYRH+ATTD) The DYRB is a quiet, ceiling-mounted supply air unit that consists of a nozzle diffuser, DYRH, and a plenum box, ATTD. The diffuser has adjustable
More informationTD-SILENT range, the quietest fans in the world in their class
TD-SILNT IN-LIN MIXD LOW DUT NS ULTR-QUIT TD-SILNT Series NW Low profile Mixed-flow fans with sound-absorbent insulation. xtremely quiet. Manufactured in plastic material, with a specifically designed
More informationIn-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
More informationROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
More informationShut-off dampers. Type AKK. For contaminated air PD AKK 1
X X testregistrierung Shut-off dampers Type Variant with circular spigot For contaminated air Plastic circular shut-off dampers for shutting off aggressive media volume flows in air conditioning systems
More informationCYLINDRICAL CASED AXIAL FLOW FANS
- Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate
More informationBELT DRIVEN CABINET FANS CVTT Series
Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal
More informationCMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced
CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC
More informationTD-SILENT range, the quietest fans in the world in their class
IN-LIN MIXD LOW DUT NS ULTR-QUIT Series NW 44682 314 Low profile Mixed-flow fans with sound-absorbent insulation. xtremely quiet. Manufactured in plastic material, with a specifically designed internal
More informationDisc valves. Type Z-LVS. For supply air. 03/2017 DE/en PD Z-LVS 1
X X testregistrierung Disc valves Type For supply air Circular disc valves with manually adjustable annular gap Nominal sizes 100, 125, 160, 200 mm Volume flow rate range 10 90 l/s or 36 324 m³/h Diffuser
More informationCOLIBRI Ceiling QUICK FACTS. Square ceiling diffuser with discs for supply air
Square ceiling diffuser with discs for supply air QUICK FACTS Adjustable discs flexible spread pattern Can be used for vertical air diffusion Swirl function Also available in the Extract air version Designed
More informationAIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS
AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS Airodyne multi leaf volume control tampers have been specifically designed for use in air conditioning and ventilation system for volume,
More informationPELICAN Ceiling. Square ceiling air diffuser for supply air and extract air QUICK FACTS
Square ceiling air diffuser for supply air and extract air QUICK FACTS Flexible distribution pattern, yet the acoustic data remains the same One K-factor regardless of distribution pattern Designed for
More informationTubular Screw Conveyor Capacity: Objectives:
T Tubular Screw Conveyor Capacity: Objectives: I Manufacturing: Helical blades welded onto the central tube Inlet/outlet opening: Maximum slope: Engine: Length: ATEX zone 20/22 Power: Transmission type:
More informationCONFIGURABLE HIGH-EFFICIENCY HEAT RECOVERY UNITS CADB/T-HE PRO-REG Series
False-ceiling models CADB/T-HE 4 to 33 Heat Recovery Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised
More informationVOLUME CONTROL / REGULATING DAMPERS
VOLUME CONTROL / REGULATING S PRODUCT RANGE Model Range Includes A - Multi-Leaf. (Flanged - Rectangular Duct) B - Multi-Leaf. (Slip joint / Spigot - Rectangular Duct) C - Multi-Leaf. (Slip joint / Spigot
More informationDFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser
Halton DFB Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket All sizes
More informationCYCLONE F 400 smoke extraction casing
Fire protection CYCLONE F smoke extraction casing Presentation of the CYCLONE F range (12) WHY CHOOSE A CYCLONE F? In order to fulfil the requirements of the CE markings (EN 1211-3 and the French governmental
More informationFALCON Ceiling. Circular ceiling air diffuser for supply air QUICK FACTS
Circular ceiling air diffuser for supply air QUICK FACTS Manages large supply airflows Horizontal or vertical distribution pattern Provision for motorised adjustment of the distribution pattern Suitable
More informationseries RVV Variable flow rate controllers
series RVV Variable flow rate controllers www.koolair.com Series RVV 1 CONTENTS Variable flow rate controllers, type RVV Description 2 Dimensions and product code 3 Selection tables 4 Variable flow rate
More informationDFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser
Halton DFA Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket Openable
More informationTCDH F400-TCDV F400. Smoke extract - Fire protection SMOKE EXTRACT FANS CENTRIFUGAL BACKWARD ROOF FANS F Application. Range.
N OU VE A U Approved F400 10 (400 C 10 mn) CE marked Special range for speed variation VAR Easy installation and maintenance Low sound level Electrical accessories and relay box mounted wired New vertical
More informationMax. airflow m 3 /s Diam. min. Diam. max
Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationTHB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser
Halton THB Perforated Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation either directly to ductwork or balancing plenum Detachable front panel enables the cleaning of the diffuser
More informationTRB - Conical Ceiling Diffuser. Halton TRB. Conical Ceiling Diffuser
Halton TRB Conical Ceiling Diffuser Horizontal or vertical air supply, suitable for both heating and cooling applications Supply air jet velocity is effectively reduced due to high mixing effect Installation
More informationAKOR-HR NEW HIGH EFFICIENCY HEAT RECOVERY UNIT. Heat Recovery AKOR-HR. Easy maintenance. EN AKOR-HR 14/1/08 13:01 Página 599
EN 599-604 AKOR-HR 14/1/08 13:01 Página 599 HIGH EFFICIENCY HEAT RECOVERY UNIT AKOR-HR NEW Heat Recovery unit with casing manufactured from expanded polypropylene. Outlet and inlet duct conectors Ø150.
More informationFront panel Perforated galvanised steel Stainless steel AISI 316 as option Casing Galvanised steel Stainless steel AISI 316 as option
ZSC - Halton Zen Semi-Circle Displacement ventilation unit Capacity for wide supply airflow range. Uniform supply air distribution is achieved through small perforations, providing optimal conditions in
More informationGigaBox centrifugal fans Product specific information
GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,
More informationCornerAir. CornerAir. Active chilled beam
Active chilled beam Description The active chilled beam is a one-way induction type air-conditioning unit that is designed for exposed installation, mounted directly under the ceiling against the corner.
More informationACOUSTIC CABINET FANS FOR SUPPLY AIR APPLICATIONS CAIB/T PRO-REG Series
ACOUSTIC CABINET FANS FOR SULY AIR ALICATIONS CAIB/T RO-REG Series Introduction of fresh air to commercial offices and industrial kitchens. Acoustic cabinet fan in galvanised sheet steel with reinforced
More informationAccessories. Front vane panel Coupling sleeve with gasket Galvanised steel Gasket of rubber compound
Halton TSR/TSS Swirl Diffuser Radial horizontal air supply Air velocity is effectively reduced due to high mixing effect Circular duct connection with gasket All sizes available as an adapted version for
More informationCHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationTwin and Single Inline Fans. Offers a range of flexible installation and application options, including auto-changeover on the Twin range
Twin and Single Inline Fans Offers a range of flexible installation and application options, including auto-changeover on the Twin range 2 Version 3.1 Breathing Buildings Inline Box Fans Demand Control
More informationDIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
More informationSingle-inlet centrifugal fans
CE 200-280 4-pole Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable CE fans are easy to install. Fans in this series have impellers with forward-curved
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot
More informationCVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
More informationBACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the
More informationJVR CONTENTS. Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Technical data. Selection charts 5 Product codes 6
1 CONTENTS Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Technical data. Selection charts 5 Product codes 6 2 VAV regulator, model Description The variable air volume regulators
More informationNEW CA MD VENTILATION AIR CONDITIONING AIR CLEANING HEATING ATORTAT. DUISIM DELESTIO COMMOLOBORE
NEW CA MD in-line CENTRIFUGAL duct FANS WITH two speeds ATORTAT. DUISIM DELESTIO COMMOLOBORE DOLENISL UTPATET IP44 NONSEQUAM, Lo n g Li f e 3. h VELIT, SI. VENTILATION AIR CONDITIONING AIR CLEANING HEATING
More informationMTD Silent Series MIXED FLOW IN-LINE DUCT FAN
MT Silent Series MIX LOW IN-LIN UT N Mixed low In-Line uct an MT Silent Series MT Silent 100/2~200/2 MT Silent 250~315 Low profile Mixed-flow fans with sound- absorbent insulation. xtreme ly quiet. General
More informationHIGH TEMPERATURE TWIN SQUIF FANS
HIGH TEMPERATURE FANS HIGH TEMPERATURE FOR SMOKE EXTRACT CERTIFIED TO EN12101-3-2002. 374 029 2085 8200 BENEFITS QUIET AND POWERFUL SOLUTIONS High performance centrifugal motor/impeller combination providing
More informationACCESSORIES FOR DUCT FANS
FOR DUCT FANS Duct fan Clamp Filter box Silencer Electric heater Duct fans are mostly used in low-to medium-pressure ducted systems with additional components such as heaters, filter boxes, dampers, etc.
More informationAircell Polymer Range
Aircell Polymer Range S, D Aircell Adjustable Blade Grilles G, A Aircell Polymer Ehaust Grilles T Aircell Polymer Air Transfer Grilles E Aircell Polymer Eggcrate Grilles Aircell - S Aircell - D Aircell
More informationTCM - Conical Ceiling Diffuser. Halton TCM. Conical Ceiling Diffuser
Halton TCM Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Suitable for cooling applications with supply/room air temperature difference as low as -12 C Installation flush to
More informationNEW Slimpak EC Box Fan (SLPT EC)
NEW Slimpak EC Box Fan (SLPT EC) Compact low profile design Duct Sizes 100 500mm Performance - Airflow 0.01 to 1.2m 3 /s, Pressure up to 650Pa Latest energy saving EC/DC motors Internal mounting IPX2 Manufactured
More informationseries Silencers
series SK Silencers www.koolair.com Series SK 1 Silencers CONTENTS ASK-1 and ASK-2 Round Silencers Description 4 ASK-1 Overall Dimensions 5 ASK-2 Overall Dimensions 6 Selection Table and Weights 7 ASK-1
More informationADAPTTM. Free. Active communicative, supply air diffuser for the WISE system, ADAPT F
ADAPTTM Free Active communicative, supply air diffuser for the WISE system, ADAPT F Quick facts Supply air diffuser with an active damper Pressure-dependent and cleanable Integrated sensor module Simple
More informationSlot diffusers, Round duct diffusers. IMP Klima
, Round duct diffusers 04 Round duct diffusers 176 , Round duct diffusers SLOT DIFFUSERS, ROUND DUCT DIFFUSERS SWIRL DIFFUSERS, VARIABLE SWIRL DIFFUSERS CIRCULAR DIFFUSERS, SQUARE DIFFUSERS VENTILATING
More informationCYLINDRICAL CASED AXIAL FLOW FANS TGT Series - ADJUSTABLE PITCH FANS
- ADJUSTABLE PITCH FANS Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish. All models incorporate
More informationIN-LINE CENTRIFUGAL FANS FOR INDUSTRIAL / COMMERCIAL USE
IN-LINE CENTRIFUGAL FANS FOR INDUSTRIAL / COMMERCIAL USE CIL - Centrifugal In-Line Fans SBAF - Slimbox Acoustic Fans ACF - Acoustic Cabinet Fans - Direct Drive ACFS - Super-Silent Acoustic Cabinet Fans
More informationGDD - Supply Grille. Halton GDD. Supply Grille
Halton GDD Supply Grille Horizontal supply, for circular duct installations For cooling and heating applications; suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes
More informationDOMESTIC RANGE DOMESTIC FANS. Perimetral bathroom fans. Axial bathroom fans. Centrifugal bathroom fans WALL FANS
VENTILATION DOMESTIC RANGE DOMESTIC FANS Perimetral bathroom fans E-100 - p.8 X-MART Matic - p. 9 X-MART - p. 10 SILENTIS - p. 11 Axial bathroom fans B-Plus - p. 12 B-Matic - p. 13 B-Pir - p. 14 B -
More informationCONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,
RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from
More informationCircular Box Fans - DAISHO EC Range DAISHO EC 125. Features. Electrical Supply. Product Code. Sizes 125, 150, 200, 250, 315, 450, 630 and 1000.
Circular Box Fans - DAISHO EC Range Features 125mm to 1mm Air flow 1,25 m 3 /h (3.5m 3 /s) Static pressures up to 125 Pa Maximum temperature range 6ºC Suitable for variable or constant pressure systems
More informationADAPTTM. Sphere. Active communicative, supply air diffuser for the WISE system. Quick Selection
ADAPTTM Sphere Active communicative, supply air diffuser for the WISE system Quick facts Supply air diffuser with an active damper Pressure-dependent and cleanable Integrated sensor module Simple wiring,
More informationShhhhhhhhhhh! Here there is silence.
TD SILENT RANGE Shhhhhhhhhhh! Here there is silence. New TD Silent range. The world s most quiet fans in its class. TD SILENT range: A leap in time. S&P, a world leader in ventilation, presents the world
More informationACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans
Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and
More informationAccessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise
Halton AWE/AWU Universal Grille Horizontal air supply, suitable also for exhaust Fixed front vanes, stable throw pattern with vertical 15 deflection: AWE, no deflection: AWU Adjustable rear vanes for horizontal
More informationHIGH INDUCTION DIFFUSERS WITH VARIABLE GEOMETRY
HIGH INDUCTION DIFFUSERS WITH VARIABLE GEOMETRY OVERVIEW CHARACTERISTICS APPLICATIONS KQ OVERVIEW : KQ high induction diffusers with variable geometry are a new type of air diffusion equipment. Their unique
More informationDCS - Ceiling Diffuser. Halton DCS. Ceiling Diffuser
Halton DCS Ceiling Diffuser DCS/C DCS/A DCS/N DCS/J DCS/P Horizontal air supply, suitable also for exhaust Modular construction with five different, interchangeable front panel options suited for modular
More informationHXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
More informationIrisControlDamper. For Adjustment and Measuring of Airflow.
IrisControlDamper For Adjustment and Measuring of Airflow www.actionair.co.uk sales@actionair.co.uk Iris Control Damper (ICD) Quick, silent and efficient is the simple summary of the features of the Actionair
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationPELICAN Ceiling HF. Square extract air diffuser QUICK FACTS
Square extract air diffuser QUICK FACTS Perforated air diffuser front face Manages large extract airflows Flush design Designed for modular suspended ceilings Quick Access front face Can be combined with
More informationLINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise
LINEAR BAR GRILLES T SERIES Quality and e!ciency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk
More information