Performance Series Motor Oil. Automatic Transmission Fluid
|
|
- April Loraine Cobb
- 6 years ago
- Views:
Transcription
1
2 Marathon Products 1 2 Performance Series Motor Oil Heavy Duty Motor Oil 9 15 Automatic Transmission Fluid Automotive Gear Lubes Cycle Oil Hydraulic Oils Transmission/Drive Train Fluid Endurance Oils Greases Lubricant Reference Online Ordering/Quick Tips Bulk Lubricants 36
3 PERFORMANCE SERIES MOTOR OIL Marathon s Performance Series line of motor oils for passenger vehicles is top of the line in terms of quality. Representative of Marathon s top performing products, the name speaks to everything we stand for as a brand. Our Performance Series Motor Oils reflects the quality and reliability of the Marathon Brand. MARATHON LUBRICANTS PRODUCT LINE Marathon provides a FULL line of quality automatic transmission fluids, industrial/fleet motor oil, and heavy duty hydraulics and greases. 1
4 Performance Series Motor Oils SAE 10W-30 A popular multi-viscosity motor oil designed for use in new and old cars. This product offers: Easy starting benefits of an SAE 10W oil High temperature performance of an SAE 30 oil. Meets the requirements for an Energy Conserving oil. Recommended for use in engines which require an SAE 10W-30 motor oil designed for API Service SN. Licensed as an ILSAC GF-5 certified engine oil. SAE 5W-30 A widely used multi-viscosity motor oil designed for use in today s newer cars. During cold weather: Flows faster to critical engine parts to minimize wear and ease starting. Meets the requirements for an Energy Conserving oil. Recommended for use in engines which require an SAE 5W-30 motor oil designed for API Service SN. Licensed as an ILSAC SAE 10W-40 A multi-viscosity motor oil designed for use in older cars, trucks, and certain farm equipment. It combines: Easy starting benefits of an SAE 10W oil. High temperature performance of an SAE 40 oil. Recommended for use in engines which require an SAE 10W-40 motor oil designed for API Service SN. SAE 5W-20 New domestic and foreign cars that require an SAE 5W-20 multi-viscosity motor oil. Reduce engine friction Performance Series Motor Oils 2
5 Ease starting Improve fuel economy. Meets requirements for an Energy Conserving oil. Also meets specifications for API Service SN and licensed as an ILSAC GF-5 certified engine oil. SAE 20W-50 A heavier-bodied multiviscosity motor oil. Designed to: Resist thinning out at high operating temperatures, Provide improved control of oil consumption Greater bearing protection in high load applications Recommended for use in cars, vans, pickup trucks, recreational vehicles, sports cars, marine engines, motorcycles and vehicles used for trailer towing. Meets the requirements for API Service SN. SAE Grade 5W-20 5W-30 10W-30 10W-40 20W-50 Gravity, API Viscosity, 100 C Viscosity Index Flash Point, C Pour Point, C Available In: Bulk Transport/55 Gallon/1 Gallon/1 Quart Identification using API Service Symbol Identification Using ILSAC Certification Mark Applicable to only Performance Series Motor Oils: SAE 5W-20, SAE 5W-30, SAE 10W-30 3 Performance Series Motor Oils
6 Performance Series Synthetic Blend Motor Oils SAE 5W-20 A Performance Series Motor Oil is a unique blend of synthetic base stocks and mineral base stocks for better fuel economy and reduced harmful emissions. It is formulated using advanced detergent-dispersant, antioxidant, anti-wear agent, friction modifier, and defoamant additives for better wear protection. It provides: Excellent protection against sludge Protects against engine rust and corrosion under severe low temperature operating conditions. It s designed for certain new domestic and foreign cars that require SAE 5W-20 multi-viscosity motor oil. Formulated to: Reduce engine friction Easy starting Improve fuel economy. Meets requirements for an Energy Conserving oil. Also meets specifications for API Service SN and licensed as an ILSAC GF-5 certified engine oil. SAE 5W-30 Widely used multi-viscosity motor oil designed using a unique blend of synthetic and mineral base stocks for use in today s newer cars. During cold weather: Flows faster to critical engine parts to minimize wear and easy starting. Meets the requirements for an Energy Conserving oil. Recommended for use in engines which require an SAE 5W-30 motor oil designed for API Service SN. Licensed as an ILSAC GF-5 certified engine oil. Performance Series Motor Oils 4
7 SAE 10W-30 A popular multi-viscosity motor oil designed using a unique blend of synthetic and mineral base stocks for use in new and old cars. It offers: Easy starting benefits of SAE 10W oil High temperature performance of an SAE 30 oil. Meets the requirements for an Energy Conserving oil. Recommended for use in engines which require an SAE 10W-30 motor oil designed for API Service SN. Licensed as an ILSAC GF-5 certified engine oil. SAE Grade 5W-20 5W-30 10W-30 Gravity, API Viscosity, 100 C Viscosity Index Flash Point, C Pour Point, C Available In: Bulk Transport Identification using API Service Symbol Identification Using ILSAC Certification Mark Applicable to only Performance Series Motor Oils: SAE 5W-20, SAE 5W-30, SAE 10W-30 5 Performance Series Motor Oils
8 Performance Series Full Synthetic Motor Oils SAE 10W-30 A high performance multiviscosity motor oil designed to meet specification is for high performing engines designed by General Motors. It offers: Easy starting benefits of an SAE 10W oil High temperature performance of an SAE 30 oil. Meets the requirements for an Energy Conserving oil. Recommended for use in engines which require an SAE 10W-30 motor oil designed for API Service SN. Licensed as an ILSAC GF-5 certified engine oil. SAE 5W-30 A high performance widely used multi-viscosity motor oil designed to meet requirements of high performing engines. During cold weather: Flows faster to critical engine parts to minimize wear and ease starting. Meets the requirements for an Energy Conserving oil. Recommended for use in engines which require an SAE 5W-30 motor oil with API Service SN and ILSAC GF-5. It is also suitable for use where GM Dexos 1 is recommended SAE 5W-20 A NEW Performance Series Motor Oil is blended using synthetic base stocks for better fuel economy and reduced harmful emissions. It is formulated using advanced detergent-dispersant, antioxidant, anti-wear agent, friction modifier, and defoamant additives for better wear protection. Performance Series Motor Oils 6
9 It provides: Excellent protection against sludge Protects against engine rust and corrosion under severe low temperature operating conditions. It s designed for certain new domestic and foreign cars that require SAE 5W-20 multi-viscosity motor oil. Formulated to: Reduce engine friction Easy starting Improve fuel economy. Meets requirements for an Energy Conserving oil. Also meets specifications for API Service SN and licensed as an ILSAC GF-5 certified engine oil. SAE Grade 5W-20 5W-30 10W-30 Gravity, API Viscosity, 100 C Viscosity Index Flash Point, C Pour Point, C Available In: Bulk Transport/55 Gallon Identification using API Service Symbol Identification Using ILSAC Certification Mark Applicable to only Performance Series Motor Oils: SAE 5W-20, SAE 5W-30, SAE 10W-30 7 Performance Series Motor Oils
10 Performance Series Full Synthetic Motor Oils SAE 0W-20 A specially formulated low viscosity, full synthetic motor oil designed to help optimize fuel economy and provide complete protection for today s new engine technology. Formulated to provide: Advanced sludge protection to keep engines clean Continued high performance even with extended drain intervals Identification using API Service Symbol SAE 0W-20 API SERVICE SN RESOURCE CONSERVING SAE 5W-20 API SERVICE SN RESOURCE CONSERVING SAE 5W-30 API SERVICE SN RESOURCE CONSERVING SAE 10W-30 API SERVICE SN RESOURCE CONSERVING SAE Grade 0W-20 Gravity, API 35.8 Viscosity, 100 C 8.2 Viscosity Index 166 Flash Point, C 220 Pour Point, C -51 Available In: 55 Gallon/1 Gallon/1 Quart Performance Series Motor Oils 8
11 VEP30 Heavy Duty Motor Oil Heavy duty SAE 30 grade motor oil designed for a wide variety of vehicles equipped with gasoline engines. Recommended for use in cars, vans, trucks and farm tractors. VEP oil meets the requirements for API Service SN. Available in SAE 30 viscosity grade. Identification using API Service Symbol SAE Grade 30 Gravity, API 29.5 Viscosity, 100 C 10.2 Viscosity Index 110 Flash Point, F 230 Pour Point, C -30 Available in: Bulk Transport/55 Gallon/5 Gallon/1 Gallon/1 Quart 9 Multipower-3 Heavy Duty Motor Oil Oil
12 Multipower -3 (Straight Grades) Heavy duty commercial motor oils formulated for use in a wide range of diesel and gasoline-powered engines. Available in SAE 10W thru SAE 50 straight grades. Selection of the proper viscosity grade for the weather and time of year can maximize performance benefits. Meets performance requirements for: API Service CF-2, CF and SL Detroit Diesel 2-stroke engines Caterpillar CD TO-2 Navistar Allison C-4 Military Specification MIL-PRF-2104G SAE Grade Viscosity, 40 C C Viscosity Index Pour Point, F Sulfated Ash, % wt. <1.0 <1.0 <1.0 <1.0 <1.0 Zinc, % wt Total Base Number Available In: Bulk Transport/55 Gallon/1 Gallon/1 Quart (Some grades not available in all sizes.) Heavy Duty Motor Oil 10
13 Multipower -3 Plus Extended Drain Capable Heavy Duty SAE 15W-40 A super high performance commercial motor oil. Designed for use in severe diesel service including: Heavy duty diesel trucks Construction equipment Farm tractors and implements When combined with an oil analysis program, Multipower -3 Plus provides: Extended oil drain intervals Meets API Service categories CI-4 Plus, CI-4, CH-4, CG-4, CF-4, CF, and SL. Meets Mack EO-M Plus, Allison C-4 Meets requirements for: Caterpillar ECF-1 Cummins CES 20076/20078 Navistar Volvo VDS-3, CI-4 Plus, Mack EO-N Premium Plus 2003, DDC 93K214, MIL-A-A CID, MIL-PRF-2104-G SAE Grade 15W-40 Plus Viscosity, 40 C C 15.2 Viscosity Index 133 Pour Point, F -30 Sulfated Ash, % wt. 1.4 Zinc, % wt..13 Total Base Number 12 Available In: Bulk Transport/55 Gallon/1 Gallon/1 Quart (Some grades not available in all sizes.) 11 Heavy Duty Motor Oils
14 Multipower -3 ELITE Heavy Duty SAE 15W-40 CK-4 Motor Oil Multipower -3 Elite is a premium quality heavy duty engine oil designed for use in 4-stroke diesel engines designed to meet new fuel efficiency requirements and provide exceptional wear performance. Application Recommendations: Diesel trucks (On-highway) equipped with exhaust after-treatment devises. Older diesel engine technologies equipped with EGR or non EGR engines. Off-highway construction, mining and earth moving equipment. Mixed fleets with gasoline and diesel fueled engines Performance Meets or exceeds requirements for: API CK-4, CJ-4, CI-4 Plus, CI-4, CH-4, CG-4, SM Cummins CES 20081, CES Mack EO-O Premium Plus, EOS-4.5, EO-N Caterpillar ECF-3, ECF-2 Volvo VDS-4, VDS-4.5, VDS 3 Detroit Diesel Power Guard 93K218, 93K222 Renault RLD-3, RLD-4 MAN M3575 Mercedes-Benz MB MTU Category 2.1 Ford WSS-M2C171-F1 SAE Grade 15W-40 Viscosity, 100 C 15.7 Viscosity Index 137 Pour Point, C -30 Sulfated Ash, % wt. 1.0 Total Base Number 10 Available in: Bulk Transport/55 Gallon/5 Gallon/1 Gallon/1 Quart Heavy Duty Motor Oil 12
15 Multipower -3 ELITE Full Synthetic Heavy Duty SAE 5W-40 CK-4 Motor Oil Multipower -3 Elite 5W-40 is a premium quality full synthetic heavy duty engine oil designed to improve fuel economy. Tests prove: National Full Synthetic SAE 5W-40 delivers greater than 1% fuel economy over conventional SAE 15W-40 oils under all driving conditions. It has exceptional wear protection characteristic. To minimize soot-related abrasive wear: Patented dispersant technology delivers twice the soot handling capability of API CI-4 oils. Delivers exceptional low temperature flow properties, oxidation stability, TBN and viscosity retention, deposit control, engine protection and durability, and soot handling ability. It is recommended for all season use by diesel or mixed fleets. Application Recommendations: Diesel trucks (On-highway) equipped with exhaust after-treatment devises. Older diesel engine technologies equipped with EGR or non EGR engines. Off-highway construction, mining and earth moving equipment. Mixed fleets with gasoline and diesel fueled engines. 13 Heavy Duty Motor Oil
16 Note: For applications not using Ultra low Sulfur Diesel (ULSD) fuel consult the engine manufacturer for recommended service interval. Performance Meets or exceeds requirements for: API CJ-4, CI-4 Plus, CI-4, CH-4, CG-4, SM Cummins CES Mack EO-O Premium Plus Caterpillar ECF-3 Volvo VDS-4 Detroit Diesel Power Guard 93K218 ACEA E7-04 Mercedes-Benz p228.3, p SAE Grade 5W-40 Viscosity, 100 C 14.3 Viscosity Index 170 Pour Point, C -35 Sulfated Ash, % wt. 1.0 Total Base Number 10 Available in: Bulk Transport Heavy Duty Motor Oil 14
17 Automatic Transmission Fluids Marathon Multi-Purpose DM Automatic Trans mission Fluid is the recommended fluid for many applications including General Motors and the Ford Motor Company models built prior to the year Handles the requirements of: Allison C-4 Older Chrysler, and American Motors cars and many foreign cars. For complete fluid change out in newer cars check owners manual. For use in: Automatic transmissions Manual transaxle transmissions Farm equipment and other applications Multi-Purpose DM Gravity, F 31.0 Viscosity, 40 C C 7.3 Viscosity Index 178 Flash Point, F 365 Pour Point, F -39 Available In: Bulk Transport/55 Gallon/5 Gallon/1 Quart 15 Automatic Transmission Fluid
18 Marathon Multi-Vehicle Automatic Transmission Fluid is a high performance automatic transmission fluid designed to meet the requirements of most cars and suv s sold by US and foreign OEM. It was designed to provide improved fuel economy over Dexron III/Mercon fluids, extended fluid life, enhanced performance for newer and older transmissions, consistent shifting and same performance as factory fill fluid. It meets or exceeds the performance of following industry specifications: Allison C-4 Chrysler ATF +3/+4 Audi part #G A2 GM Dexron II/III Honda ATF-Z1 Isuzu Genuine Ford Mercon M2C166H, MERCON SP Ford Mercon M2C919E/M2C202B/M2C9192 Nissan Matic J/K Mitsubishi SP II/III Toyota JWS3309 Toyota Type WS, Type T IV Voith G607 Volvo Part # JASO 1A Quality ZF TE-ML 03d, 040, 14A and 17C ESSO Type LT Idemitsu K17 Multi-Vehicle ATF (MV) Gravity, F 30.6 Viscosity, 100 C 6.8 Viscosity Index 175 Pour Point, F -40 Available In: Bulk Transport/55 Gallon Automatic Transmission Fluid 16
19 Multi-Purpose Gear Compounds Stable, non-foaming lubricants that provide EP protection for gears subjected to high loads. For use where a hypoid, multi-purpose, EP lubricant is recommended. Meets: Mack (GO-H, GO-J) API Service (GL-4,GL-5, MT-1) Military Specification MIL-PRF-2105E Ford M2C108C Available in SAE 80W-90 and SAE 85W-140 viscosity grades MP-571 MP-573 SAE Grade 80W-90 85W-140 Gravity, API Viscosity, 40 C C Viscosity Index Pour Point, C Available In: Bulk Transport/400 lb./129 lb./35 lb. 17 Automotive Gear Lubes
20 Heavy Duty Synthetic Gear Lubricants (EATON EXTENDED WARRANTY COVERAGE) Formulated using synthetic base stocks and sulfurphosphorous additive technology. Recommended for year around use in wide range of automotive manual transmissions, differentials, steering gears, rear axles, and transfer cases. These lubricants are designed to provide the potential for improving fuel economy and extended drain interval. These lubricants meet or exceed following industry specifications: API GL-5, API MT-1, API PG-2 Eaton Axle PS-037, Rockwell International 0-76-E, 0-76-B Eaton Extended Warranty Coverage Mack GO-H/S, GO-J Plus Dana/Spicer Axle, GE D50E9C MIL-PRF-2105E SAE Grade 75W-90 80W-140 Gravity, API Viscosity, 40 C C Viscosity Index Pour Point, C Available In: Bulk Transport/400 lb./129 lb./35 lb. Automotive Gear Lubes 18
21 Full Synthetic NEA Gear Lubricants Recommended for year around use in wide range of automotive manual transmissions, differentials, steering gears, rear axles, and transfer cases. They are formulated using synthetic base stocks and proprietary additive system to provide excellent fluidity at lower temperatures assuring faster lubrication of components and easier shifting of transmission. These lubricants meet or exceed following industry specifications: API GL-5, API MT-1 Dana Heavy Duty Eaton Axle PS-163 SAE J2360 Mack GO-J MIL-PRF-2105E SAE Grade 75W-90 80W-140 Gravity, API Viscosity, 100 C Viscosity Index Pour Point, C Available In: Bulk Transport/400 lb./129 lb./35 lb. 19 Automotive Gear Lubes
22 Marine-Terrain 2-Cycle Oil A premium quality 2-cycle engine oil designed for use in air and water-cooled 2-cycle engines with and without oil injection. Applications include: Outboards, snowmobiles, motorcycles, lawn mowers, snow blowers, and others. Solvent treated for easy mixing and dyed for identification in gasoline. Meets NMMA TC-W3. Also suitable for TC, TC-W and TC-WII. Color Green Gravity, API 30.1 Viscosity, cst@ 40 C C 8.3 Viscosity Index 165 Flash Point, C 95 Pour Point, C Max -46 Available in: Bulk Transport/55 Gallon/1 Quart 2-Cycle Oil 20
23 Multi-Purpose Hydraulic Oils Premium quality hydraulic oils designed for use in most hydraulic systems as well as many other uses. Fortified against: Rust Corrosion, Foaming Oxidation Wear For hydraulic systems equipped with: Vane, gear, screw and radial pumps These oils exceed the requirements of: Vickers and Denison HF0, HF1, HF2 Cincinnati Milacron P-68(ISO-32), P-70(ISO-46), and P-69 (ISO-68) Also for use in: Air compressors, electric motors, some enclosed gear cases, circulating systems and other applications. Available in ISO 32, 46, 68 and 100. HF Oil A low viscosity oil for use in non-critical applications. Uses include: Chain oil, machine oil, certain air systems, form oil and light duty hydraulic applications. Multi-Purpose ISO HF Oil Grade Gravity, API Viscosity, 40 C C Viscosity Index Pour Point, F Flash Point, F Available In: Bulk Transport/55 Gallon/5 Gallon 21 Hydraulic Oils
24 Premium AW II Hydraulic Oils Marathon PREMIUM AW II Hydraulic Oils are formulated with high quality API Group II base-stocks and an additive package that provides protection against: Rust, oxidation, corrosion, foaming and wear. Performance Meets or exceeds following requirements: Vickers I-286-S, M-2950-S Vickers 35VQ25 Denison HF-1, HF-2, HF-0 Denison TE6-C U.S. Steel 136, 127 CETOP RP91H Jeffrey No. 87 Lee-Norse B. F. Goodrich 0152 Afnor E (HM) ASLE 64-1 TO 64-4, 70-1 TO 70-3 Cincinnati Milacron P-68, P-69, P-70 General Motors LH-04-1, LH-06-1, LH-15-1 Military Specifications 2075-T-H, 2110-T-H, 2135-T-H Benefits Marathon PREMIUM AW II Hydraulic Oils are recommended for use in hydraulic systems with: Vane, gear, screw and radial pumps. Other applications include: Air compressors, circulating systems and enclosed gear cases. Grade Color Viscosity, 40 C C Viscosity Index Pour Point, F Flash Point, F Available In: Bulk Transport Hydraulic Oils 22
25 Marafluid Super HT A multi-viscosity all-season hydraulic and transmission fluid designed to meet the special lube requirements of most farm tractors and implements. Provides: EP protection Oxidation and corrosion resistance Moisture dispersion capability Reduces brake chatter Maintains necessary power-take-off performance Meets the fluid requirements of farm equipment manufactured by: Allis Chalmers, J.I. Case, John Deere, Deutz, Ford, IH, Massey Ferguson, Oliver, Steiger, Versatile, White and others. Applications include: Transmissions, differentials, final drives and hydraulic systems SAE Grade Gravity, API C 9.2 Viscosity Index 148 Pour Point, C -36 Zinc, % wt..12 Available In: Bulk Transport/55 Gallon/5 Gallon/1 Gallon 23 Transmission/Drive Train Fluids
26 Marafluid 4 Fluids Transmission and Drive Train Fluids de signed for use in certain construction and farm equipment. Applications include: Transmissions, differentials, final drives, and hydraulic systems These fluids meet the requirements of: Caterpillar TO-4, Allison C-4, ZF TE-ML03 and API GL 1, 2, 3 Available in SAE 10W, 30, and 50 viscosity grades. SAE Grade 10W Gravity, API Viscosity, 40 C C Viscosity Index Pour Point, C Flash Point, F Available In: Bulk Transport/55 Gallon/5 Gallon Heavy Duty Synthetic Transmission Fluid SAE 50 (EXTENDED DRAIN with EXTENDED WARRANTY) It is formulated for use in heavy duty manual transmissions operated under server service. It is designed for transmission applications in equipment that is operated in on-highway and off-highway. It allows an extended drain interval to 250,000 miles in conjunction with extended warranty coverage to Transmission/Drive Train Fluids 24
27 750,000 miles. It meets or exceeds following industry specifications: Rockwell International 0-81 Eaton PS-081, PS-109 API MT-1 Full Synthetic Transmission Fluid SAE 50 It is designed for use in heavy duty manual transmissions operated under server service. It is formulated using synthetic base stocks and proprietary additive technology. It is designed for transmission applications in equipment that is operated in on-highway and off-highway. It meets or exceeds following industry specifications: Eaton PS-164 API MT-1 SAE Grade Heavy Duty Full Gravity, API Viscosity, 100 C Viscosity Index Pour Point, C Available In: Bulk Transport/400 lb./120 lb./35 lb. 25 Transmission/Drive Train Fluids
28 Endurance R&O Oils Turbine quality, industrial oils formulated to: Resist rust, oxidation and thickening in high temperature service. Used in: Non EP gear cases, steam turbines, air compressors, non-antiwear hydraulic systems, chain drives, circulating oil systems and simple oiling systems. Available in ISO 32, 46, 68 and 100 viscosity grades. Meets or exceeds these specifications: MIL-L-17672C Denison HF-1 Cincinnati Milacron P-38, P-55, and P-54 DIN Part 1 of Endurance R & O Oils ISO Grade Gravity, API Viscosity, 40 C C Viscosity Index Pour Point, F Flash Point, F Available in: Bulk Transport/55 Gallon Endurance R&O Oils 26
29 Maralube Moly A lithium-base No. 2 grade grease fortified with polyethylene and molybdenum disulfide for extra protection against wear and water washout. A multi-purpose grease with proven performance in varied applications including automotive and commercial fleets, farm, construction, and industrial. Meets the Ford MIC-75B Specification Super Maraplex EP-2 A red colored, lithium-complex, No. 2 grade grease fortified with an EP additive to prevent wear. Resists water and breakdown under operating temperatures as high as 400 F. Exhibits a tacky consistency to resist throw-off. An outstanding lubricant for: Automotive use as well as farm and construction equipment and industrial applications. Ideal for use in wheel bearings. Meets NLGI grease classifications GC-LB for wheel bearing and chassis lubrication. Maratrac (#2 ) & Maratrac LT (#1) Construction & Farm Grease with 3% Moly Disulfide Contains 3% moly disulfide to minimize wear under heavily loaded conditions. Recommended for: Heavy duty construction equipment, especially where high temperature or water contamination is a concern. Typical applications include: Ball joints and any points needing grease lubrication on bulldozers, scrapers, loaders, log skidders, and other heavy duty off-road equipment. Also recommended for farm tractors and implements. 27 Greases
30 It provides: Low oil bleed Minimal separation for equipment requiring lubricant Stability during storage. Meets or exceeds the requirements for: Caterpillar MPGM, Case MPGM, John Deere, FMC, International Harvester, and MG-C of Greases Maraplex Maratrac Maratech Moly EP2 Maratrac LT HDP NLGI Soap Type Lithium Lithium Lithium Lithium Polyurea Complex Complex Complex Performance EP EP EP/Moly EP EP Additives Poly/Moly Tackiness Tackiness Tackiness Texture Smooth Tacky Tacky Tacky Smooth Color Gray Red Black Black Green Dropping Point, F Penetration 60 Strokes Viscosity of Extracted Oil 40 C C Timken Load, Lbs Available In: 400 lb./120 lb./35 lb./14 oz. Greases 28
31 Motor Oil Reference Licensing and Certification All oils licensed and certified by the American Petroleum Institute (API) bear the API donut logo showing the oil s viscosity grade, service classification, and energy conserving capability. Some gasoline engine oils also display the International Standardization and Approval Committee (ILSAC) starburst logo. The starburst makes it easier for consumers to select the correct engine oil for their vehicles. Gasoline Engine Oil Classifications Oils designed for gasoline engine service are grouped into S (Service Oils) categories. The latest S category oil can be used in place of any obsolete S oil. SA Obsolete Contains no additives. Not suitable for use in gasoline-powered automotive engines built after Use in more modern engines may cause unsatisfactory performance or equipment harm. SB Obsolete Not suitable for use in gasolinepowered automotive engines built after Use in more modern engines may cause unsatisfactory performance or equipment harm. SC Obsolete Not suitable for use in gasolinepowered automotive engines built after Use in more modern engines may cause unsatisfactory performance or equipment harm. SD Obsolete Not suitable for use in gasolinepowered automotive engines built after Use in more modern engines may cause unsatisfactory performance or equipment harm. SE Obsolete Not suitable for use in gasolinepowered automotive engines built after SF Obsolete SG Obsolete SH Obsolete SJ Current For 2001 and older automotive engines. 29 Lubricant Reference
32 SL Current SM Current For 2004 and older automotive engines. For 2010 and older automotive engines. SN Current Introduced in October 2010 for 2011 and older vehicles, designed to provide improved high temperature deposit protection for pistons, more stringent sludge control, and seal compatibility. API SN with Resource Conserving matches ILSAC GF-5 by combining API SN performance with improved fuel economy, turbocharger protection, emission control system compatibility, and protection of engines operating on ethanol-containing fuels up to E85. NLGI Certification Marks Greases may also be identified by the NLGI certification marks as shown below. Greases with these certification marks have been tested in accordance with ASTM D-4950 and meet its higher performance categories. Wheel Bearing Dual Service Chassis Service Service NLGI Consistency Grades Consistency Penetration at 25 C Lubricant Reference 30
33 SAE Viscosity Grades for Engine Oils SAE Low Temperature ( C) Maximum Temperature (100 C) Viscosity Max. Cranking Max. Pumping Min. Max. (cp) (cp) (cst) (cst) 0W 6,200 at ,000 at W 6,600 at ,000 at W 7,000 at ,000 at W 7,000 at ,000 at W 9,500 at ,000 at W 13,000 at ,000 at Diesel Engine Oil Classifications Oils designed for diesel engines service are grouped into C (Commercial Oils) categories. CA Obsolete CAUTION: Not suitable for use in diesel-powered engines built after CB Obsolete CAUTION: Not suitable for use in diesel-powered engines built after CC Obsolete CAUTION: Not suitable for use in diesel-powered engines built after CD Obsolete Introduced in For certain naturally aspirated and turbocharged engines. CD-II Obsolete Introduced in For two-stroke cycle engines. CE Obsolete Introduced in For high-speed, four-stroke, naturally aspirated and turbocharged engines. Can be used in place of CC and CD oils. CF Obsolete Introduced in For off-road, indirect-injected and other diesel engines including 31 Lubricant Reference
34 those using fuel with over 0.5% weight sulfur. Can be used in place of CD oils. CF 2 Obsolete Introduced in For severe duty, two-stroke-cycle engines. Can be used in place of CD-II oils. CF-4 Obsolete Introduced in For high-speed, four-stroke, naturally aspirated and turbocharged engines. Can be used in place of CD and CE oils. CG-4 Obsolete Introduced in For severe duty, high-speed, four-stroke engines using fuel with less than 0.5% weight sulfur. CG-4 oils are required for engines meeting 1994 emission standards. Can be used in place of CD, CE, and CF-4 oils. CH-4 CURRENT Introduced in For highspeed, four-stroke engines designed to meet 1998 exhaust emission standards. CH-4 oils are specifically compounded for use with diesel fuels ranging in sulfur content up to 0.5% weight. Can be used in place of CD, CE, CF-4, and CG-4 oils. CI-4 CURRENT Introduced in For highspeed, four-stroke engines designed to meet 2004 exhaust emission standards implemented in CI-4 oils are formulated to sustain engine durability where exhaust gas recirculation (EGR) is used and are intended for use with diesel fuels ranging in sulfur content up to 0.5% weight. Can be used in place of CD, CE, CF-4, CG-4, and CH-4 oils. Some CI-4 oils may also qualify for the CI-4 PLUS designation. CJ-4 CURRENT For high-speed four-stroke cycle diesel engines designed to meet 2010 model year on-highway and Tier 4 nonroad exhaust emission standards as well as for previous model year diesel engines. These oils are formulated for use in all applications with diesel fuels ranging in sulfur content up to 500 ppm (0.05% by weight). However, the use of these oils with greater than 15 ppm (0.0015% by weight) sulfur fuel may impact exhaust after treatment system durability and/or drain interval. CJ-4 oils are especially effective at sustaining emission control system durability where particulate filters and other advanced after treatment systems are used. Lubricant Reference 32
35 CK-4 CURRENT Introduced in 2017 for a wide range of engine applications, these oils offer better performance than CJ-4 oils and are designed to support new fuel efficiency standards. Offers improved oxidation protection and aeration control. Suitable for use in older and newer engines. Optimum protection is provided for control of catalyst poisoning, particulate filter blocking, engine wear, piston deposits, low- and high-temperature stability, soot handling properties, oxidative thickening, foaming, and viscosity loss due to shear. API CK-4 oils exceed the performance criteria of API CJ-4 with CI-4, CI-4 PLUS, CH-4, CG-4 and CF-4 and can effectively lubricate engines calling for those API Service Categories. When using CK-4 oil with higher than 15 ppm sulfur fuel, consult the engine manufacturer for service interval. Gear Oil Reference API Gear Oil Categories API Category Type of Service Typical Applications GL-1 GL-2 GL-3 GL-4 GL-5 GL-6 MT-1 Mild sliding conditions, low loads Mild sliding conditions, low loads Mild to moderate sliding conditions and loads Moderate to severe sliding conditions and loads Severe sliding conditions and loads with high-speed shock loads Obsolete Added component wear and oil seal protection over GL-5 Truck manual transmissions Automotive worm gear axles Manual transmissions and spiral bevel gears Hypoid gears in passenger cars and any GL-3 application Hypoid gears in severe service, and any GL-4 application Nonsynchronized manual transmissions in heavy-duty service 33 Lubricant Reference
36 SAE Viscosity Grades for Gear Oils SAE Viscosity Centistokes (cst) at 100 C Maximum Temperature C for Grade Min. Max. Viscosity of 150,000 Centipoise (cp) 75W W W Comparative Viscosity Classifications (ISO vs. SAE) ISO SAE SAE Gear Typical Viscosity Grade Engine Grade Centistokes Saybolt Universal Grade 40 C) Seconds 100 F) 32 10W 75W W W W Grease Reference Grease Classifications In 1991, the National Lubricating Grease Institute (NLGI) developed the NLGI Service Classification System to classify greases. Greases are classified by the following automotive applications: Wheel Bearing Service GA Mild duty GB Moderate duty, typical of most vehicles GC Severe duty, high temperatures, frequent stop and go service Chassis Service LA Mild duty, frequent relubrication LB High loads, water exposure, infrequent relubrication For more information about API s engine oil program visit Lubricant Reference 34
37 Marathon Lubes Online Ordering System for Marathon Jobbers Utilize the new Marathon Lubes Online Ordering System for fast and accurate orders. Marathon Dealers can purchase Marathon brand motor lubricants from: Their supplying Marathon Jobber Through Marathon-approved grocery wholesalers Pinnacle Oil is located at: 5009 W. 81st Street Indianapolis, IN Contact Pinnacle Technical Services at: Quick Tips The empowered website provides information on: Repackaging program features and details Product specification data sheets (MSDS data) Pallet configurations available Jobber Lubricant Rebate definitions A Link to the Marathon Lubes Online Ordering System Products displaying the API Donut and the ILSAC Starburst meet the latest quality requirements of the automakers. Learn more about recycling used oil on the web at Go to for used oil collection center locations 35 Online Ordering/Quick Tips
38 Marathon Bulk Lubricants With Marathon as your partner, you ll capture higher margins with more competitive and aggressive pricing for engine, commercial, and industrial lubricants. Typically, you ll save over one dollar/gallon purchasing product in bulk, as compared to the price of the same product packaged in quart containers. Marathon has two bulk programs to fit your needs: Totes Program Designed for customers who don t have bulk product storage. New and reconditioned totes are both available. Repackaging Program Transfer bulk oils and lubricants from a storage tank to 55-gallon drums or 5-gallon pails bearing Marathon s trademark. Marathon Jobber Lubricant Volume Rebate Program: Total Annual Purchases (Gallons) Annual Rebate 25,000 49,000 $.01 50,000-99,999 $ , ,999 $ , ,999 $ , ,999 $ , ,999 $ ,000 + $.07 *Rebate Program subject to change See your Marathon Representative for program details and requirements. Bulk Lubricants 36
39 Visit us on the web at For additional copies of the booklet call , Ext. 2 and reference materials number May 2017
DIVELUCA OIL COMPANY
DIVELUCA OIL COMPANY HIGH QUALITY OIL LUBRICANTS Email: info@diveluca.com Web: www.diveluca.com PH. 713-589-3164 Houston, TX PH. 954-536-6602 Miami, FL PRODUCTS ENGINE OIL Gasoline Motor Oil Non-Detergent
More informationPRODUCT CATALOG 20 16
PRODUCTCATALOG 2016 Passenger Cars Synth-Blend Motor Oils: MorGas Motor Oils are premium quality, passenger car motor oils (PCMO) that meet the latest automotive manufacturers requirements of API SN. MorGas
More informationPremium Protection for Today s Engines EXTRA PROTECTION AND VALUE. PROTECK TM ELITE K SYNTHETIC BLEND ENGINE OIL
Premium Protection for Today s Engines TM EXTRA PROTECTION AND VALUE. TM ELITE K SYNTHETIC BLEND ENGINE OIL TM ELITE K SYNTHETIC BLEND 10W-30 AND 15W-40 CK-4 ENGINE OIL PROVIDES EXTRA PROTECTION AND VALUE,
More informationMorGas PRODUCTCATALOG 2013
MorGas PRODUCTCATALOG 2013 QUALITY ASSURANCE With MorGas you have quality assurance from start to finish... All incoming raw materials are tested to assure quality All products are manufactured using the
More informationHEAVY DUTY DIESEL ENGINE OILS
HEAVY DUTY DIESEL ENGINE OILS FULL SYNTHETIC MAG 1 Full Heavy Duty Diesel Engine Oil is designed to provide the highest levels of protection and performance from our most advanced technology and formulations.
More informationThe values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification.
HEAVY-DUTY DIESEL MOTOR OIL D-MO 10W-30, 15W-40 PRODUCT DESCRIPTION D-MO (Diesel Motor Oil) is designed to exceed the tests required for the new API CK-4 specification for all naturally aspirated and high-output
More informationReduces friction losses by half, resulting in fuel economy exceeding 3% (compared to standard 5W30 oil)
Product Code 45607 Reduces friction losses by half, resulting in fuel economy exceeding 3% (compared to standard 5W30 oil) ECOTech 5W30 ULTRA FE A full synthetic engine lubricant, formulated using the
More informationHeavy Duty Fleet Lubricants. Engineered for Performance
Heavy Duty Fleet Lubricants Engineered for Performance Heavy Duty Product Range Superior Heavy Duty Diesel Engine Lubricants Keeping operating costs under control We have been looking to keep our fleet
More informationPRO-SPEC IV SYNTHETIC BLEND
PRO-SPEC IV SYNTHETIC BLEND 89 Years of world-class manufacturing experience has enabled Texas Refinery Corp. to develop the most robust Total Base Number in the industry, miles ahead of other CJ-4 oils
More information15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines.
15W40 CH4/SJ : This oil is a high performance, dedicated heavy duty engine lubricant designed for use in modern high speed turbocharged diesel engines. It uses an exclusive additive formulation in conjunction
More informationPremium Engine Oil Products
Premium Engine Oil Products PRODUCTCATALOG 2018 Passenger Cars Synth-Blend Motor Oils: MORGAS MotorOilsare premiumquality,passenger car motor oils(pcmo)thatmeet the latest automotive manufacturers requirements
More informationCONTENTS 01 GASOLINE ENGINE OILS 02 DIESEL ENGINE OILS 04 AUTOMOTIVE FLUIDS 05 AUTOMOTIVE GREASES
CONTENTS 01 GASOLINE ENGINE OILS 02 DIESEL ENGINE OILS...... 2 10 0 3 M A N U A L A U T O M O T I V E G E A R O I L S... 1 7 04 AUTOMOTIVE FLUIDS... 05 AUTOMOTIVE GREASES... 6 Oraby Street, El Tawfikeya
More informationAUTOMOTIVE LUBRICANTS
Table of Contents Page General Application Guide Shell Engine Oils............................. 3.3 Antifreeze / Coolant Shellzone................................... 3.4 Rotella ELC Extended Life Coolant................
More informationMobil Delvac 1300 Super
PrintFind a PDSFind a MSDS Mobil Delvac 1300 Super Extra High Performance Diesel Engine Oil Product Description Mobil Delvac 1300 Super 10W-30 and 15W-40 are extra high performance diesel engine oils that
More informationENGINEERED FOR DYNAMIC PERFORMANCE
ENGINEERED FOR DYNAMIC PERFORMANCE Integrated Lubricant Manufacturing Hub Hin Leong Marine International, part of Hin Leong Group, began production of lubricants in Singapore in 1995 under the brand HL
More informationConventional and Synthetic Blend Lubricants
Below is a short summary about some of the more popular lubricants that we carry at the Beattie Coop. Conventional and Synthetic Blend Lubricants SuperLube TMS (Heavy Duty Diesel Engine Oil) SuperLube
More informationDELIVERING MAXIMUM ENGINE PROTECTION
DELIVERING MAXIMUM ENGINE PROTECTION CENEX HEAVY DUTY DIESEL ENGINE OILS PREMIUM HEAVY DUTY DIESEL ENGINE OILS for Superior Engine Protection Engineered to exceed the highest industry and diesel engine
More informationThis product guide will be your reference to the high quality range of lubricants available in Misr Petroleum Co.
Misr Petroleum Co. is a major manufacturing and marketing company in Egypt. We manufacture and market a wide range of lubricants such as automotive, industrial and greases. These lubricants are blended
More informationStandards, Specifications and Classifications of Lubricants
STANDARDS, SPECIFICATIONS AND CLASSIFICATIONS OF LUBRICANTS The most important function of lubricants is the reduction of friction and wear and the relative movement of two bearing surfaces is only possible
More informationCHAMPION OEM SPECIFIC 0W30 MS-BHDI
NEW PRODUCTS PASSENGER CAR NEW 0W30 MS-BHDI KEY BENEFITS Meeting PSA specification B71 2312. Euro VI Blue HDI DW 10F. Fuel economy benefit of 4,2% over a 5W40 oil. Backward compatible with all euro IV
More informationEXCEPTIONAL STABILITY PROFOUND PERFORMANCE
EXCEPTIONAL STABILITY PROFOUND PERFORMANCE CENEX PREMIUM GASOLINE ENGINE OILS POWERFUL GASOLINE ENGINE OILS Remarkable Engine Protection Engineered to exceed the latest industry and manufacturers requirements
More informationEXCEPTIONAL STABILITY PROFOUND PERFORMANCE
EXCEPTIONAL STABILITY PROFOUND PERFORMANCE CENEX PREMIUM GASOLINE ENGINE OILS POWERFUL GASOLINE ENGINE OILS Remarkable Engine Protection Engineered to exceed the latest industry and manufacturers requirements
More informationNEW PRODUCTS MARCH 2015 WOLF OFFICIALTECH 0W30 MS-BHDI KEY BENEFITS SPECIFICATION LEVEL PACKAGING DESCRIPTION PERFORMANCE NEW
NEW PRODUCTS PASSENGER CAR MOTOR OILS NEW 0W30 MS-BHDI KEY BENEFITS Meeting PSA specification B71 2312. Euro VI Blue HDI DW 10F. Fuel economy benefit of 4,2% over a 5W40 oil. Backward compatible with all
More informationAUTOMOBILE LUBRICANT INDUSTRIAL LUBRICANT GREASE
INDUSTRIAL LUBRICANT GREASE TOP PRIME 0W40 XTeer TOP PRIME is a premium performance engine oil formulated with state of the art additives and fully synthetic base fluids (PAO+GIII). It provides best
More informationAUTOMOTIVE LUBRICANTS PROGRAM
AUTOMOTIVE LUBRICANTS PROGRAM OEM-APPROVED, LICENSED AND GUARANTEED AUTOMOTIVE LUBRICANTS MARKETING TOOLS TO ACQUIRE AND RETAIN CUSTOMERS THE CITGO AUTOMOTIVE LUBRICANTS FAMILY ENGINE OIL Gasoline Diesel
More informationGREATER EFFICIENCY FOR YOUR BUSINESS
GREATER EFFICIENCY FOR YOUR BUSINESS Commercial Heavy Duty On-Highway Lubricants CITGO Lubricants Deliver More Value to Business Your world is always asking you to do more often lots more with less. Businesses
More informationFOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO
FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO DELO DELIVERS CONFIDENCE TABLE OF CONTENTS Introduction 3 Engine Oils 4-5 Transmission Fluids 6 Gear Lubricants 7 Greases 8 Coolant/Antifreeze
More informationPASSENGER CAR MOTOR OILS
PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed
More informationenjoy technology the complete line of lubricants for your truck efficiency and reliability in all working conditions
enjoy technology the complete line of lubricants for your truck efficiency and reliability in all working conditions the line of i-sigma lubricants From eni s research laboratories comes a complete line
More informationSpecification Number. CXO-0W30-LAS12 WSS-M2C171-D 1 Liter 12 (Case Qty.) CXO-0W30-DAS WSS-M2C171-D 55 U.S. gal Specification Number
Motor Oil 0W-30 Super All Season Motor Oil CXO-0W30-LAS12 WSS-M2C171-D 1 Liter 12 (Case Qty.) 167658 CXO-0W30-DAS WSS-M2C171-D 55 U.S. gal. 1 167658 0W-30 API SERVICE CI-4/SN Motorcraft 0W-30 Super All
More informationPASSENGER CAR MOTOR OILS
PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed
More informationThe PURUS Advantage Product Overview
The PURUS Advantage The PURUS Advantage Product Overview PURUS Heavy Diesel Engine Oils (HDEO) have been designed to deliver premium performance in over-the-road & off-road applications PURUS HDEO provides
More informationHAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF
HAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF PRODUCT DESCRIPTION Havoline Full Synthetic Multi-Vehicle ATF is a premium quality synthetic transmission fluid that is recommended for most modern 6+ speed automatic
More informationValvoline Premium Blue Plus
What is? Valvoline is a benchmark in diesel engine oil technology, specially produced to lubricate the modern diesel engines meeting latest emission norms operating under a wide variety of service conditions.
More informationCAM2
www.cam2.com 1-800-338-CAM2 1 2 What Does Motor Oil do for Your Engine? 4 What is in your CAM2 motor oil? 4 Why You Change Your Motor Oil 5 Selecting the Right Motor Oil for Your Vehicle 6 Viscosity 6
More informationDavid Weber Oil Company 601 Industrial Road Carlstadt, NJ X X X 6735 X X Y Y. Grade A Petroleum 90 E Hawthorne Ave. Valley Stream, NJ 11580
BID TABULATION SHEET Title: Automotive and Diesel Lubricants (Oils): Engine/Gear Oils, Greases, ATF & Hydraulic Oils Opening Date: September 18, 2015-2:30pm Contract #: CC-0047-15 Total Bids Received:
More informationAUTOMOTI VE LUBRIC ANTS PROGRAM
AUTOMOTI VE LUBRIC ANTS PROGRAM OEM-APPROVED, LICENSED AND GUARANTEED AUTOMOTIVE LUBRICANTS MARKETING TOOLS TO ACQUIRE AND RETAIN CUSTOMERS THE CITGO AUTOMOTIVE LUBRICANTS FAMILY ENGINE OIL Gasoline Diesel
More informationP R O D U C T C ATA L O G U E
CATALOGUE COMPANY CULTURE International Lubricant Company was established to meet the demand for providing more energy efficient and dynamic lubricant products required by Original Equipment Manufacturers
More informationPRODUCT NAME ANTI OXIDANT BRAND NAME PETRO HIND PRODUCT CODE- BAB 108
PRODUCT NAME ANTI OXIDANT PRODUCT CODE- BAB 108 BAB 108 is a kind of multipurpose ash-free additive. It not only boasts outstanding anti-oxidation performance, but has great abrasion resistance and extreme
More informationProduct Description. Its performance features can also be realized in the vast majority of older transmission applications (<6 speeds).
Product Description Chemlube Synthetic MV ATF is a synthetic universal automatic transmission fluid specifically designed for passenger car and light duty trucks to meet the performance requirements and
More informationFOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO
FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO DELO DELIVERS CONFIDENCE TABLE OF CONTENTS Introduction 3 Engine Oils 4-5 Transmission Fluids 6 Gear Lubricants 7 Greases 8 Coolant/Antifreeze
More information1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
More informationAUTOMOTIVE ENGINE OILS PREMIUM LOW SAPS FULLY SYNTHETIC GRADES FULLY SYNTHETIC GRADES
A U T O M O T I V E AUTOMOTIVE ENGINE OILS The Exol range of automotive products is formulated to give the following benefits:- EXCELLENT LUBRICATION OVER A WIDE TEMPERATURE RANGE EASE OF COLD START COMBINED
More informationHAVOLINE PRODS FULL SYNTHETIC MOTOR OIL
HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL SAE 5W-40, Euro 5W-40 PRODUCT DESCRIPTION Fully synthetic motor oils formulated to provide exceptional wear protection in hot or cold operating temperatures. They
More informationLUBRICANTS FOR FLEETS
LUBRICANTS FOR FLEETS Petro-Canada Lubricants fluids and greases meet and exceed specifications set by many of the world s most demanding Original Equipment Manufacturers (OEMs). From heavy duty engine
More informationDelo 400 MGX SAE 15W-40 Superb Protection in both High - and - Low Sulphur Diesel Fuel Environments
Delo 400 MGX SAE 15W-40 Superb Protection in both High - and - Low Sulphur Diesel Fuel Environments INTRODUCTION Let s Go Further with Delo 400 MGX SAE 15W-40. When your heavy-duty equipment is working,
More informationPREMIUM GERMAN OIL MOLINOL
PREMIUM GERMAN OIL WWW..DE SEMI-SYNTHETIC ACTIVE SM/SL/CF 10W40 SEMI-SYNTHETIC ENGINE OIL API SM/SL API CF VW 501.00 RN O700 SYNTHETIC GOLD ACTIVE SM/SL/CF/EC FULL SYNTHETIC ENGINE OIL SAE 5W/40 API SM/CF
More informationARIYAT INTERNATIONAL FZE DUBAI, U.A.E INDEX. No Topic Page No
ARIYAT INTERNATIONAL FZE DUBAI, U.A.E INDEX No Topic Page No 1 Index 1 2 Introduction 2 3 Automotive Lubricants Motor oil 3-9 4 Automotive Lubricants Diesel Engine oil 10-17 5 Automotive Lubricants Two
More informationDIVELUCA OIL COMPANY
DIVELUCA OIL COMPANY HIGH QUALITY OIL LUBRICANTS Email: diveluca@aol.com Tel. 713-893-6173 Web: www.diveluca.com Houston, TX PRODUCTS ENGINE OIL Gasoline Motor Oil Non-Detergent 2 Gasoline Motor Oil (Monograde)
More informationLONG SERVICE LIFE OILS. The Larix MED engine oils are particularly developed for all modern turbocharged, high output
MODERN EXTENDED DRAIN S LONG SERVICE LIFE OILS The Larix MED engine oils are particularly developed for all modern turbocharged, high output gasoline and diesel cars. The Larix MED range consists of four
More informationLubricants & speciality products for commercial vehicles
Lubricants & speciality products for commercial vehicles Yet to be replaced with the HiRes version or approved pic Engine oils Chevron Global Lubricants scientists and engineers work closely with OEMs
More informationSupreme Plus - 5w30 LL Supreme Plus
Supreme Plus - 5w30 LL Supreme Plus 1L 88901005 5L 88901006 20L 88901007 60L 88901008 205L 88901009 ACDelco 5w30 Supreme Plus is a multi-grade engine oil specially formulated to give long life performance.
More informationHEAVY DUTY OIL STABILIZER PURE SYNTHETIC OIL STABILIZER ENGINE OIL STOP LEAK
ENGINE OIL ADDITIVES HEAVY DUTY OIL STABILIZER Increases oil life at least 50% longer Reduces oil consumption Eliminates dry starts Raises oil pressure Increases power and miles per gallon 1 Quart 10001
More informationCHAIRMAN'S MESSAGE. Thanking you, Redha Hassan Al Yousuf Chairman
CHAIRMAN'S MESSAGE UNITED GREASE & LUBRICANTS CO.LLC was established with the aim of responding to our customers needs in an efficient, dynamic and profitable way and guide our esteemed customers with
More informationCommercial Lubricant dba Metrolube 229 Arlington Avenue Staten Island, NY X X X X X X Y X. Bilo Industries 145 Brook Avenue Deer Park, NY 11729
BID TABULATION SHEET Title: Automotive and Diesel Lubricants (Oils): Opening Date: September 16,02016-2:30pm Contract #: CC-0047-16 Total Bids Received: 5 Signed Proposal Stock Disclose Non- Collusion
More informationTOP 1 OIL PRODUCTS COMPANY
TOP 1 ENGINE OIL TREATMENT-GOLD TOP 1 ENGINE OIL TREATMENT-GOLD is a fast-action, multi-power oil additive engineered for high performance engines. TOP 1 GOLD is engineered to improve the oil by helping
More informationSAMLUBE GEAR MAX RANGE EP 90; EP 80W90 & EP 85W140 (GL4)
GEAR OILS SAMLUBE GEAR MAX RANGE EP 90; EP 80W90 & EP 85W140 (GL4) High performance mild extreme pressure gear lubricant, containing multi-functional additives required for mild extreme pressure conditions.
More informationENGINE OILS. MF Ultra Engine Oil 15W/40
ENGINE OILS MF Ultra Engine Oil 15W/40 MF Ultra Engine Oil 15W/40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic diesel engine oil. This product has been formulated to provide the utmost
More informationCatalog Number Greases, Oils & Lubricants
Catalog Number 90600 Greases, Oils & Lubricants Greases 11315 11300 11304 11302 11316 Multi-Purpose Lithium Grease Long lasting, hard working formula delivers high performance in a wide range of heavy-duty
More informationSpectra Xtreme 15W40 CJ-4
Spectra Xtreme CJ-4 Advanced Performance Synthetic Blend Motor Oil SAE 15W-40 Synthetic blend, multi-grade Diesel or Gasoline motor oil formulated for severe duty and extended drain intervals Provides
More informationQuick guide to Havoline engine oils. Product SAE Code API API ILSAC ACEA MB VW A3/B3 A3/B4 C3 A3/B3 A3/B4 C ,
November 2009 Quick guide to Havoline engine oils Product SAE Code ILSAC ACEA MB VW Havoline Fully Synthetic 5W-40 3032 SM CF - Havoline Fully Synthetic C3 5W-30 3042 SM CF - A3/B3 A3/B4 C3 A3/B3 A3/B4
More informationMarine Range.
Marine Range www.motul.com ADVICE Why do Marine engines require specific lubricants? Marine engines are used in very different conditions from that of automotive engines. They are also operating at much
More informationGasoline Engine Oils Synthetic & Semi Synthetic
Gasoline Engine Oils Synthetic & Semi Synthetic Page 1 of 61 QBREX SM/CF Qbrex International QBREX API SM/CF is a fully synthetic lubricants for ultimate engine protection and performance. It is a multi-grade
More informationTHE MODERN ENGINE OILS
MODERN LONG SERVICE LIFE S THE MODERN S The Hypoxis MLS lubricants of Dyade are high quality lubricants with one of the latest API specifications. The Hypoxis MLS comes in the 5W/30 and 5W/40 full synthetic
More informationENGINE CARE FULL PRODUCT RANGE
ENGINE CARE FULL PRODUCT RANGE HISTORY OUR VISION CORE VALUES AREAS OF OUR FOCUS Since inception in 1987, Motosel Industrial Group, Inc has established itself as a manufacturer and supplier of lubricants
More informationLUBRICANTS. heavy duty vehicles
LUBRICANTS heavy duty vehicles TABLE OF CONTENTS 4 DIESEL TURBO VHPD 5W30 4 DIESEL TURBO UHPD MID SAPS 10W40 5 DIESEL TURBO UHPD 10W40 5 DIESEL TURBO THPD MID SAPS 15W40 6 DIESEL TURBO THPD 10W40 6 DIESEL
More informationSOCIEDAD DE REPRESENTACIONES OTR CHILE SPA
SOCIEDAD DE REPRESENTACIONES OTR CHILE SPA MANQUEHUE SUR 520, OFICINA 205, LAS CONDES EMAIL: VENTAS@OTRCHILE.COM FONO: +56232246464 WWW.OTRCHILE.COM Product Info Premium TOP PRIME TOP Gasoline Gasoline
More informationThe Mobil range of agricultural lubricants
The Mobil range of agricultural lubricants 1 Mobil lubricants proven both in the laboratory and in the field High-performance oils for diesel engines Mobil Delvac 1 LE 5W-30 Fully synthetic heavy-duty
More informationPRECISION HYDRAULIC PERFORMANCE
PRECISION HYDRAULIC PERFORMANCE CENEX PREMIUM HYDRAULIC FLUIDS CENEX HYDRAULIC OIL for All Your Applications Choose the right premium hydraulic fluid for all of your equipment applications. Your precision
More informationReliability you can trust to keep you on the road
Reliability you can trust to keep you on the road Quality Endurance Passion A Partner you can rely on With Gulf you get the benefit of more than 100 years global experience and technical innovation. With
More informationPENNZOIL 100% SYNTHETIC MULTI-VEHICLE ATF
PENNZOIL 100% SYNTHETIC MULTI-VEHICLE ATF Pennzoil 100% Synthetic Multi-Vehicle ATF is the latest formulation and advanced technology which meets specification requirement of North America, Japanese and
More informationAutomotive, Commercial & Industrial. Product Guide
NEW! Agricultural Products Guide Automotive, Commercial & Industrial Product Guide 2018 ENGINE OILS AUTOMOTIVE GEAR OILS TRANSMISSION/POWER FLUIDS GREASES HYDRAULIC FLUIDS INDUSTRIAL GAS ENGINE OILS FUNCTIONAL
More informationWith a rapidly expanding industrial profile, a growing trans- port sector and a population approaching 200 million
Product Guide Our lubricants Hyde Energy branded lubricants address all the major areas of customer demand. With a rapidly expanding industrial profile, a growing transport sector and a population approaching
More informationSAE 10W-30 CK-4 Synthetic Blend is OEM certified by Cummins, Detroit Diesel, Volvo, Mack, Ford, and Renault; and recommended
SAE 15W-40 CK-4 is OEM certified by Cummins, Detroit Diesel, Volvo, Mack, Ford, and Renault; and recommended for use in all engines specifying API CK-4 Service Category and SAE 15W-40. KL-HD0560 $15.95
More informationADVANCED ENGINE PROTECTION FROM DAMAGING DEPOSITS & WEAR NOW INCLUDING
ADVANCED ENGINE PROTECTION FROM DAMAGING DEPOSITS & WEAR NOW INCLUDING TRIM THROW OUT PAGE 2mm from edge Havoline with Deposit Shield For over 100 years, Havoline engine oils have been trusted and tested
More informationProduct by Singapore CO-OWNED BY
Product by Singapore Our full range of lubricants are blended using base oils from new refineries and high tech additives to exceed industry performance standards. CO-OWNED BY About Us HydroPure lubricants
More informationTYRELINE DISTRIBUTORS LIMITED NEW ZEALAND SHELL LUBRICANTS PRODUCT DATA GUIDE
TYRELINE DISTRIBUTORS LIMITED NEW ZEALAND SHELL LUBRICANTS PRODUCT DATA GUIDE DESIGNED TO MEET CHALLENGES Disclaimer This Product Data Guide provides a summary of Shell s main Lubricant grades - as well
More information2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES
2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer*
More informationFull Range of Total Lubricants. For passenger cars
Full Range of Total Lubricants For passenger cars Passenger Car Product Range Superior quality lubricants WHO IS TOTAL? At Total, expertise equals quality Total, the world s fifth-largest oil company,
More information315 SIMPLEX SUPREME. Continued on Next Page TD-315 (Rev. 08/2009)
315 SIMPLEX SUPREME Simplex Supreme is a universal extreme pressure para-synthetic torque converter fluid that is designed for use in most farm and industrial tractors. Simplex Supreme meets and exceeds
More informationUnivar / Boss Lubricants Product Portfolio
Univar / Boss Lubricants Portfolio 1 Hydraulic Oils Engine Oils Keep your engines in optimal condition with the complete line of engine oils from BOSS Lubricants. We have a number of different oil blends
More informationBRB additives Over 30 years of experience coming your way
BRB additives Over 30 years of experience coming your way Issue date: July 23, 2015 Viscosity Index Improvers Viscotech 6-series: o OCP Viscosity Modifiers with excellent shear stability (22 SSI), thickening
More information2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES
2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer
More informationAugust
truck and Construction Equipment Range August 2014 www.facebook.com/motul www.youtube.com/motul www.motul.com DIESEL ENGINE LUBRICANTS 100% SYNTHETIC TechnoSynthese FULL SAPS Fuel Economy Tekma Optima
More informationINDUSTRIAL LUBRICANTS & GREASES
INDUSTRIAL LUBRICANTS & GREASES ANTI-WEAR HYDRAULIC OIL AW ISO 22* AW ISO 32* AW ISO 46* AW ISO 68* 5 Gallon 65847 55 Gallon 62970 3/1 Gallon 00326 2/2.5 Gallon 00322 5 Gallon 00325 55 Gallon 62861 330
More informationPERRYS PRODUCTS. (08)
PERRYS PRODUCTS (08) 8636 2274 admin@perrys.com.au www.perrys.com.au Product Name Package Size Specifications Perrys 222 Grease 450 G, 20 KG Page 3 Perrys 422 20 Lt Page 5 Perrys 424 20 Lt, 200 Lt Page
More informationCompany Profile. Mission. Vision. Values.
Company Profile Crystal Petroleum is a Pioneer Company in the field of Lubricants and Greases. It was established back in 1997 in Middle East Trade-Hub - UAE. Within a span of few years, Crystal Petroleum
More informationPETROL & GAS EQUIPMENTS DOMESTIC and FOREIGN TRADE LTD. CO.
www.ozkaroil.com PETROL & GAS EQUIPMENTS DOMESTIC and FOREIGN TRADE LTD. CO. Rexoil Diamond Pro FE 5W-30 Rexoil Diamond Pro F 5W-30 Easier start in cold Low oil consumption Increases system efficiency
More informationHEAVY DUTY CK-4 DIESEL OILS
HEAVY DUTY TRUCK OILS HEAVY DUTY CK-4 DIESEL OILS CK-4 is available in Synthetic Blend and Petroleum Longer engine life Extended oil changes Lower soot levels Less filter maintenance Less oxidation Lower
More information2013 FUEL & OIL / LUBRICANT PRICING
2013 FUEL & OIL / LUBRICANT PRICING EFFECTIVE JANUARY 1, 2013 (Updated August 23, 2013) INCLUDES: Pre-Mixed Fuel (2-Stroke) Pre-Mixed Fuel (4-Stroke) Bar & Chain Oil 2-Stroke Engine Oil - XP Professional
More informationPart No oz. (946 ml) bottle 11 oz. (325 ml) can
Diesel Service Page 1 / Page 2 The BG Diesel Service addresses the needs of these specialized powerplants by restoring lost performance and preventing costly repairs. This service will reduce overall maintenance
More informationMULTI-PURPOSE GREASE PRODUCT DESCRIPTION TECHNICAL PROPERTIES PERFORMANCE FEATURES APPLICATIONS GREASE
SONIC BLUE GUARD MULTI-PURPOSE PRODUCT DESCRIPTION SONIC BLUE GUARD is a premium-quality, multipurpose NLGI #2, lithium-complex grease. It is designed to lubricate effectively both heavy- and light-duty
More informationMade in USA AUTOMOTIVE INDUSTRIAL MARINE
Made in USA AUTOMOTIVE INDUSTRIAL MARINE Passenger Car Motor oil EURO SYN MOTOR OIL 5W40 (Full Synthetic) * Excellent oxidation stability supports extended service intervals * Formulated exclusively with
More informationGear oils for passenger cars and commercial vehicles
High-tech safety for gearboxes Gear oils for passenger cars and commercial vehicles Gear oils for passenger cars. For problem-free operation over the entire life of the vehicle, passenger car gearboxes
More informationNEXUS LUBRICANTS Ξ PASSENGER CAR Ξ HEAVY DUTY
NEXUS LUBRICANTS Ξ PASSENGER CAR Ξ HEAVY DUTY Our Technology Nexus Lubricants are designed and manufactured using Nano-Technology and nanographene particles to enhance the lubricants performance. This
More informationLubricant Viscosities
Page 1 of 5 Shutdown SIS Previous Screen Product: TRUCK Model: 793C TRUCK ATY Configuration: 793C Off-Highway Truck ATY00001-UP (MACHINE) POWERED BY 3516 Engine Operation and Maintenance Manual 793C Off-Highway
More informationVECTON with System Pro Technology TM
Spotlight on: VECTON with System Pro Technology TM New engines bring new challenges for your oil VECTON can give you confidence to take on these challenges System Pro Technology means longer useful oil
More information2/ OFF-ROAD: PUBLIC WORKS
2/ OFF-ROAD: PUBLIC WORKS TOTAL has developed lubricants suited to construction, mine and quarry machinery. A complete range of specific products to satisfy all international standards and approvals required
More informationUltimate Performance Ultimate Protection
Advanced Quality Assurance... a commitment, not only in the formulation, testing, manufacturing and packaging of lubricants, but also to ordering, fulfillment and service - the entire process. We have
More information294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680
294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680 Supreme Gear Lube No Tack is a multipurpose thermally stable and thermally durable para-synthetic gear lubricant that is recommended
More information