GAR-SEAL. Dimensions DN (other sizes upon request) Adapter Flange EN ISO 5211 NF E
|
|
- Edmund Marshall
- 6 years ago
- Views:
Transcription
1 Applications GAR-SEAL butterfly valves are used in most cases where corrosive, abrasive and toxic media need to be controlled. GAR-SEAL valves are used, for controlling, throttling and shutting off purposes in the chemical, petrochemical and chlorine industry as well as in electroplating, the paper industry and many other branches. GAR-SEAL valves convince through their long service life and offer with reduced maintenance requirements an increased amount of operation performance. GAR-SEAL Dimensions DN (other sizes upon request) Flange Connections EN 09 DIN 50 PN 0/6 ANSI B 6.5., Class 50 Face-to-face Dimensions EN 558- GR 0 (DIN 0 T K) ISO 575 table 5 short Line 0 Bodies Wafer and Lug design with neck for insulation. Body Strength DIN / EN 56 T (DIN 840), tested within the scope of the inspection body designated by Modul H Temperature Range 40 C to +00 C Adapter Flange EN ISO 5 NF E 9-40 Operating Pressure DN , 6 bar above DN 00 0 bar Tightness Gastight for overpressure acc. to EN666 P + leakrate A Vacuum up to mbar abs. Liner PTFE Antistatic PTFE (s. SAFETY-SEAL) PVDF UHMPE For additional product information please refer to the valve documentation.
2 Garlock Material Selection Chart Valve Material Design Type Code Valve Body Material Code Body Liner Material Code Disc Material 4 Body Type Code Material 5 Specific Design Body Liner Code Material 6 Valve Type Code Material GGG 40. (0.704) PTFE** GS-C 5 (.069) UHMPE*** Stainless Steel (.458) 4 Others 4 PTFE** UHMPE*** Staniless Steel (.458 and others) Hastelloy B/C* (.4800/.460) W L WAFER Ring Body LUG Flange-On-Body A C V antistatic (SAFETY-SEAL) abrasive Service For increased Vacuum S STERILE-SEAL 5 Titan* (.705) MOBILE-SEAL 9 PVDF**** Monel 400* (.460) Uranus B6* (.4500) Tantal* PVDF**** others With existing Code pipe flanges W-T Drilling in acc. to EN 09 PN 0 L-T Drilling in acc. to DIN 50 PN 0 Drilling in acc. to W-TW DIN 8459 Examples GAR-SEAL, WAFER Design SAFETY-SEAL, LUG Design MOBILE-SEAL, WAFER Design, acc to TW Standard, electrically heated STERILE-SEAL, LUG Design SAFETY-SEAL, WAFER Design, antistatic GAR-SEAL, WAFER Design Vacuum Lining W - - MT L A - MT W-TW - - MT L - S W A - MT W V - MT Performance Data DN , - 4 Nominal Pressure max. 6 bar ( DN 00) Vacuum up to mbar abs. (dep. upon temperature) Operating temperature -40 C to +00 C (for PTFE**) -40 C to +85 C (for UHMPE***) -40 C to +5 C (for PVDF****) MT = GAR-SEAL Butterfly valves comply with the TA-Luft regulations. * upon request ** Polytetrafluorethylene *** Ultrahighmoleculare Polyethylene **** Polyvinylidenfluoride
3 GAR-SEAL Materials Pos. Qty. Material Designation Pos. Qty. Material Designation.4 to DN 00 Shaft 5 PTFE Sealring.40 to DN VITON O-Ring (Sealring) Steel/PTFE slide bearing (top) 7 Stainless steel Nameplate Steel/PTFE slide bearing (center) 8 4 Stainless steel Rivet 4 Steel/PTFE slide bearing (bottom) 9 VITON O-Ring 5 s. table Body 0 PTFE Security element 6 PTFE, carbon reinf. retaining ring (split) Steel electroplated Earthing Cable 7 Stainless Steel Circlip VITON O-Ring (Adapter Flange) 8 GYLON Washer Stainless steel/viton Sealring 9 Stainless Steel Body screw 4 Stainless steel Locking screw 0 GYLON Top gasket 5 4 Stainless steel Screw s. table Lining 6 4 Stainless steel Circlip Silicone Elastomer Backup-Element 7 Stainless steel Adapter Flange s. table Disc 8 GYLON Seal (Adapter Flange) 4 GYLON Bottom gasket (GGG 40) Valve disc does not apply above DN 50 > DN 50 4 Pc. each Special design
4 Garlock Dimensions Garlock Butterfly Valve Wafer Design Flange Connection: EN 09 (DIN 50), PN 0 PN 6 (DN 50 - DN 00) ANSI B 6.5, 50 LBS Overall Length: EN 558- GR0 (DIN 0 T K) Adapter Flange: EN ISO 5 to 4 DN 50 to DN 600 DN 50 and above K Z DN Adapter DIN ANSI SW DIN ANSI Weight Inch mm Flange A B C D E F G H J PN 0 L ø P N PN 0 UNC kg 50 F ,0 40 4xM6 4x 5 /8 -,60 / 65 F ,0 40 4xM6 4x 5 /8 -,60 80 F ,0 40 8xM6 4x 5 /8-4, F ,0 50 8xM6 8x 5 /8-6,0 5 5 F ,0 50 8xM6 8x /4-0 8, F ,0 56 8xM0 8x /4-0, F ,0 56 8xM0 8x /4-0 6, F ,0 60 xm0 x 7 /8-9 7,0 00 F ,0 70 xm0 x 7 /8-9 6, F , xM0 x - 8 7, F , xM4 6x , F , xM4 6x /8-7 5, F , xM4 0x /8-7 57, F , xM7 0x /4-7 56, xm for PN 6 > DN xm xm4
5 GAR-SEAL Dimensions Garlock Butterfly Valve Lug Design Flange Connection: EN 09 (DIN 50), PN 0 PN 6 (DN 50 - DN 00) ANSI B 6.5, 50 LBS Overall Lenght: EN 558- GR0 (DIN 0 T K) Adapter Flange: EN ISO 5 to 4 DN 50 to DN 600 K Z DN Adapter DIN ANSI SW DIN ANSI Weight Inch mm Flange A B C D E F H J PN 0 L ø P N PN 0 UNC kg 50 F ,0 45 4xM6 4x 5 /8 -,40 / 65 F ,0 45 4xM6 4x 5 /8-4,0 80 F ,0 56 8xM6 4x 5 /8-6, F ,0 56 8xM6 8x 5 /8-0,0 5 5 F ,0 60 8xM6 8x /4-0, F ,0 66 8xM0 8x /4-0 6, F ,0 76 8xM0 8x /4-0, F ,0 90 xm0 x 7 /8-9 6,90 00 F ,0 0 xm0 x 7 /8-9 5, F , xM0 x - 8 0, F , xM4 6x - 8, F , xM4 6x /8-7 5, F , xM4 0x /8-7 47, F , xM7 0x /4-7 85, xm for PN 6 > DN xm xm4
6 Garlock Mounting Dimensions Hand lever Garlock Butterfly Valve L & W Design DN Weigth Inch mm a b c d kg / // 50/65/80, /5 00 / ,5 6 / 8 50 / ,5 ØM ØM DN DN F X F Z Z S S O R O R SW T T V L U L W R L DN Adapter Flange Inch mm EN ISO 5 F SW L ØM O nxr S U T Z V W X / // 50/65/80 F , 45 4 x /5 00/5 F ,5 45 4x / 8 50 / 00 F , 45 4 x / 50 / 00 F 50 50, x /6 50 /400 F , x , / / 500 F , x , F ,5,5 8 x ,
7 GAR-SEAL Mounting Dimensions Worm gear Garlock Butterfly Valve L & W Design DN Gross weight (kg) Inch mm f g h i k l m n Type W Type L ,6 69, ,60 7,40 / ,6 79, ,60 8, ,6 94, ,00 0, ,6 09, ,0 4, ,6 4, ,60 6, ,0 47, ,00, ,0 77, ,0 9, ,7, ,0 47, ,7 6, ,0 6, ,7 49, ,00 0, ,7 464, ,70 49, ,0 507, ,40 80, ,0 557, ,0 74, ,0 69, ,0 47,70
8 Garlock Technical Data Torques, Flow Rate Torques For selecting the the correct the valve actuation the enclosed values represent the maximum torques for the opening and closing action. Flow Rate For liquids following references apply: Constant Control: 4,5 m/s Open/Close Control: 7,5 m/s Für GAR-SEAL Butterfly Valves with UHMPE*-Lining the maximum flow rate is limited to,5 m/s. Lining PTFE UHMPE* PTFE Vacuum* PVDF DN Torque Torque Torque Torque Inch mm Nm Nm Nm Nm / * Ultrahighmolecular Polyethylene * Standard-Vacuum: 5 mm Vacuumlining up to DN 00 7 mm Vacuumlining from DN 50 to DN 600 All stated values reflect net torques. For the actuator design a safety factor of 0-5 % should be taken into consideration. P x T Diagram GAR-SEAL Butterfly Valve bar 0 8 DN 50 - DN DN 40, DN 50 - DN C PTFE UHMPE PVDF
9 GAR-SEAL Technical Data Control Characteristics k v -Values Open/Close Control Characteristic Curve The graph shows the percentage flow rate, depending upon the disc-aperture. The curve reflects a throttle valve of any size with slight mods depending upon thickness and profile of the disc itself. Throttle valves with apertures above 60 should be used for on/off control only. Angle of aperture Continuous Control / Characteristic Curve For continuous control of a throttle valve the flow rate for a 60 aperture is defined with 00 % to provide a flow reserve. The graph has a characteristic of similar percentage for disc opening from 0 to 60. Angle of aperture Flow rate in % Flow rate in % Nominal bore k v -factor against the angle of aperture Inch mm / k v -values against the angle of aperture The k v -factor reflects the flow of water (density 000 kg/m ) in m/h for a pressure gradient of p = bar. The resistance characteristic of the butterfly valve is subject to the k v -factor. It replaces all earlier definitions, s.a. cross-section, flow and friction coefficient. A detailed butterfly valve dimensioning for maximum flow and/or for throttle use is performed by CONVAL software programming. Please consult Garlock direct.
10 Garlock Explosion View GAR-SEAL Butterfly Valve Pos. Designation Shaft Top Bush Bearing Intermediate Bush Bearings 4 Bottom Bush Bearing 5 Body (split) 6 Retaining Ring 7 Spring Washer * Special design Pos. Designation 8 Washer 9 Bolt 0 Gasket Liner Back-up Elastomer Disc 4 Gasket Pos. Designation 5 Sealring 6 O-Ring 7 Nameplate 8 Groove pin 9 O-Ring 0 Sealing Element Pos. Designation O-Ring Gasket* 4 Plug 5 Bolt 6 Spring Washer 7 Support Ring 8 Sealing Element
11 Notes GAR-SEAL
12 Product Range Hydraulic Components Oil Seals Gasketing Products Metallic Gasketing Resiliant Metal Seals Assemblies Compression Packings Graphite Seals Inflatable Seals Valves Mechanical Seals Service Technical details subject to change without notice. TDGS /09 Garlock GmbH Falkenweg 4468 Neuss Germany Phone: +49-/49-0 Fax: +49-/ Garlock France S.A.S 90, Rue de la Roche du Geai 409 Saint-Etienne France Phone: +-4/ Fax: +-4/ Garlock (GB) Limited Unit H5, Premier Way Lowfield Business Park Elland, West Yorkshire, HX5 9HF United Kingdom Phone: +44-4/600 Fax: +44-4/ Garlock Middle East P.O. Box 58 Oilfield Supply Centre Jebel Ali Free Zone Dubai U.A.E Phone: +97-4/8865 Fax: +97-4/ Other Garlock facilities: Garlock Inc., N.Y., U.S.A. Garlock of Canada Ltd. Garlock de Mexico Garlock Pty. Ltd., Australia Pacific Rim Operations, Singapore
Garlock Butterfly Valves Trusted throughout chemical, petrochemical and many other industries
Garlock Butterfly Valves Trusted throughout chemical, petrochemical and many other industries Advancing the Science of Sealing Table of contents GARLOCK BUTTERFLY VALVES Overview The correct type of lining
More informationPS-SEAL PTFE based high-performance seals
Garlock PS-SEAL PTFE based high-performance seals PS-SEAL Contents Introduction and advantages.............. 2 Technical data............................ 3 + 4 PS Standard/PS Non Standard.............
More informationGarlock Butterfly Valves Trusted throughout chemical, petrochemical and many other industries
Garlock Butterfly Valves Trusted throughout chemical, petrochemical and many other industries Europe, Middle East and Africa Advancing Leaders the in Science Sealing of Integrity Sealing Table of contents
More informationGarlock Butterfly Valves Technical Catalog
Technical Catalog Trusted throughout the chemical, petrochemical & many other industries TABLE OF CONTENTS GARLOCK BUTTERFLY VALVES Overview...3 The correct type of lining...4 Head flange, body, flange
More informationGarlock Butterfly Valves Technical Catalog Trusted throughout the chemical, petrochemical & many other industries
Technical Catalog Trusted throughout the chemical, petrochemical & many other industries Garlock Butterfly Valves Trusted throughout chemical, petrochemical and many other industries FOR CORROSIVE AND
More informationTechnical data Pressure (bar) : 10 Temperature ( C) : Sizes (mm) : Flange accommodation : DIN PN 10/(16)
50 300 mm wafer and lugged lined butterfly valves - Coilspring shaft sealing A PTFE lined solution according ISO 5752/5 short (EN 558-1/T5) with various corrosion resistant disc materials to satisfy demanding
More informationBR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationPneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
More informationSIL. BIANCA - Butterfly valve DN Description. Product features
Description Centric butterfly valve plastomer lined for On/Off and control service for aggressive and corrosive fluids and high purity application Product features Body construction B1 Wafer DN 3-600 B3
More informationLined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
More informationNAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300
NAF-Torex butterfly valves DN 80-700, Size 3-28, PN 10-40, ANSI Class 150, 300 Fk 41.42(18)GB 11.04 Primary characteristics NAF-Torex, High-Performance butterfly valve is available with either metal-to-metal
More informationThe HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck length according HeizAnlV. External
More informationOperating Instructions Garlock Butterfly Valves DN : mm / 2-24
Operating Instructions Garlock Butterfly Valves DN : 50-600 mm / 2-24 PN : 10 / 16 Type: GAR-SEAL SAFETY-SEAL STERILE-SEAL MOBILE-SEAL Conformity declaration... 14 0 Introduction... 15 1 Proper use...
More informationDN25 DN1000 resp. 1" 42"
DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationptfe seated 30 years of high quality experience
ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation
More informationBIANCA - Butterfly valve DN Description. Product features
Description Centric butterfly valve plastomer lined for On/off and control service for aggressive and corrosive fluids and high purity application Product features Body construction B1 Wafer DN 32-600
More informationButterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
More informationNELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS Metso's Neles BO series butterfly valve is designed for use in vacuum Pressure Swing Adsorption
More informationBR 14b / BR 14c Application:
High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example
More informationHigh performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.
Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,
More informationPeter Meyer Ball valves Cryogenic
Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing
More informationbrands you trust. XLD - Lined Butterfly Valve Series
brands you trust. XLD - Lined Butterfly Valve Series PERFORMANCE We listened to our most demanding critics: Our customers. Here s our response. ANSI Class 150/PN10 valve design! Temperature Range 0 to
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
More informationCylindrical Valves SCP Series
SCP: Product Info 22 Cylindrical Valves, plastomer-lined PM 22 M.00 e May 2004 Cylindrical Valves SCP Series are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even
More informationButterfly valve VZAF
Key features and product range overview General Construction Characteristics Supplier Nominal diameter Wafer Ideal for very corrosive, InterApp DN32 DN900 VZAF-C agressive and high purity application Flow
More information16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
More informationSBE Butterfly Valves elastomer-lined PM 52 e / Modular Design
DN40 DN800 resp. 1½" 32" SBE Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
More informationBrewSeal butterfly valves Wafer and lugged
Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.
More informationNAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300
NAF-Torex butterfly valves DN 80-700, Size 3-28, PN 10-40, ANSI Class 150, 300 Fk 41.42(17)GB 08.01 Primary characteristics NAF-Torex, High-Performance butterfl y valve is available with either metal-to-metal
More information1" 42" SBP Butterfly Valves plastomer-lined PM 51 us /
1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design Valves are available
More informationSERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES
SERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES Series 835 process-rated ANSI Class 150 high-performance Wafer-Sphere butterfly valves are an excellent cost-effective
More informationSBP Butterfly Valves 1" 42"
PRODUCT MANUAL PM SBP: Product Info 51 Butterfly Valves, plastomer-lined PM 51 M.00 us SBP Butterfly Valves 1" 42" are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationPneumatic Butterfly Valve Pfeiffer Type BR 14b/AT
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Application Tight closing, double eccentric butterfly valve for process engineering and plants with industrial requirements Nominal size DN 80 to DN 400
More informationKEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationThe ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
More informationR o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationSeries 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
More informationButterfly Valves SBP Series
SBP: Product Info 51 Butterfly Valves, plastomer-lined PM 51 M.00 e May 2004 Butterfly Valves SBP Series are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationNELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
More informationCOMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
More informationSCP Cylindrical Plug Valves plastomer-lined PM 22 e / Modular Design
DN15 DN100 resp. ½" 6" RP (red. port) SCP Cylindrical Plug Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even toxic process media in either liquid or gaseous
More informationThe Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.
The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-to-face dimension, according to
More informationKeystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
More informationMETAL SEATED NELDISC BUTTERFLY VALVES, SERIES L12
METAL SEATED NELDISC BUTTERFLY ALES, SERIES L12 2 L12 20 Issue 4/99 SIZES AND PRESSURE RATINGS Size range DN 80-600, 3" - 24". Pressure ratings PN 10, 16, 25 and ANSI 150. FEATURES Third-generation, metal-to-metal
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
More informationFLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS
FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS 1 M1 20 Issue 4/99 DESIGN FEATURES Size range DN... 300. For larger sizes, DN 350-400, select series MP, MA, or MT. PN 10, 16, and 40. Pressure
More informationCentred disc butterfly valve with elastomer liner. Wafer type body Full -lug type body
Type series booklet 0167.1/8-10 KE ELASTOMER Centred disc butterfly valve with elastomer liner Wafer type body Full -lug type body DN 40 to 300 Allowable pressure PS 10 bar Design in accordance with EN
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationR o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
More informationKeystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationDouble Offset Butterfly Valve
General Applications Airport Refuelling Hydrocarbon Processing HVA hemical Processing Purified Gas Steam & Vacuum Services Potable Water Variations of Sealing PTFE - Teflon with glass Metal/Metal Fire
More informationMETAL SEATED NELES ZEROLEAK NELDISC BUTTERFLY VALVES, SERIES L1 & L2
METAL SEATED NELES ZEROLEAK NELDISC BUTTERFLY ALES, SERIES L & L Neldisc series L is a wafer type and series L a lug type metal seated high performance butterfly valve. With close to equal percentage characteristics
More informationRichter PFA/PTFE Shut-off and Control Butterfly Valves
Richter PFA/PTFE Shut-off and Control Butterfly Valves NK, NKS, NKL, NKS-C, NKL-C New: Sizes to mm (4 ) Titanium, PE-UMW Body lining PTFE, TFM-PTFE, PTFE-L, PE-UMW Disc/stem unit PFA, PFA-L, stainless
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationSolutions For The Oil & Gas
Bolted Bonnet Gate & Globe Crane Globe & Gate Valves are used on almost all refinery units and are available in different material options of cast steel. Gate, globe, check, globe stop-check valves are
More informationBR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
More informationTHROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationButterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly
More informationNeotecha NTB - NTC PFA lined ball valves
These PFA lined ball valves are used in a wide variety of applications in many industries Features General application The valves are ideally suited for corrosive applications, requiring reliable performance,
More informationBUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31
BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:
More informationBUTTERFLY VALVES HIGH PERFORMANCE
VALVE MANUFACTURER FOR INDUSTRIAL AND WATER APPLICATIONS BUTTERFLY VALVES HIGH PERFORMANCE Pressure : PN10 ~ PN40 / Class 150 ~ 300 Size : Basic Type : 2" ~ 48" (50mm ~ 1200mm) Fire Safety Type : 2" ~
More informationBUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
More informationKEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
More informationTECHNICAL BULLETIN. Valtek Torex TX Control and Shut-off Valves Butterfly Valves. Experience In Motion VLENTB
Valtek Torex TX Control and Shutoff Valves Butterfly Valves VLENTB414302 01.11 TECHNICAL BULLETIN Experience In Motion Primary characteristics Valtek Torex TX, HighPerformance butterfly valve is available
More informationProduct Range. Products for all industrial applications
Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric
More informationSeries 8500 Grayline Butterfly Valves
Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure
More informationBUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
More informationPRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
More informationARI-ZETRIX ANSI. with worm gear. with electric rotary actuator Auma or Schiebel. with pneumatic actuator. with hydraulic actuator
Process valve - Fig. 016 - Double flanged process valve with metallic sealing - Triple offset - Fig. 018 - Fully lugged process valve with metallic sealing - Triple offset - Fig. 019 - Butt weld ended
More informationTriple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi ug, ug and Flanged Type API 607 Fire Safe Page 1 Year : Description Specification : GVC double eccentric High Performance butterfly valves suitable for bi-directional flow and bubble
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
More informationButterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
More informationCHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
More informationSoft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 50-300 2 components DN 350-500 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data 5 technical data 5 KA series 6 components DN 40-300 6
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationCentered disc butterfly valves with AMRING elastomer liner. 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631
Type series booklet 8444.1/9 -- 10 ISORIA 10 Centered disc butterfly valves with AMRING elastomer liner 11/2 to 40 inch 150 psig Rated (10 Bar) Design in accordance with EN 593 and ISO 10631 Applications
More informationball valve soft seated maintenance-free with floating ball
Data sheet 8220.1/8 TOPI 210 ball valve soft seated maintenance-free with floating ball The sealing variants are approved in accordance with the german clear air regulations TA-Luft 2002 Flanged ends PN
More informationSeries 26d Ball Valve
Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
More informationSoft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
More informationButterfly valve Series K
P R O C E S S T E C H N I K G M B H Centrally mounted butterfly valve PTFE lined Type KG 6 KG 8 K 16 K 18 two-piece body GEFA-MULTITOP Automation system Exchangeable flange for direct installation Unsurpassed
More informationKE ELASTOMER. Type Series Booklet
Butterfly Valve KE ELASTOMER Centred-disc Butterfly Valve Elastomer Liner DN 40-300 PS 10 bar Type Series Booklet Legal information/copyright Type Series Booklet KE ELASTOMER All rights reserved. The contents
More informationMaterials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Long neck for isolation Wafer
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More information1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA
TECNICA DATA Nominal diameter: 0 Face-to-face: EN Series (DIN 2 T 1) ISO 72 Series API 09 Table 1 BS 1 Series Flange accommodation: DIN 1 PN /1 ap-joint flange: DIN 21 and DIN 22 Weld-on flange: DIN 27
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More information