Temperature Sensors for MARINE ABEE. Member Of

Transcription

1 Temperature Sensors for MARINE ABEE Member Of

2 Previous experience, Know-how of 40years of Sensor manufacturing Page 2

3 COPYRIGHT 2012 UTECO ABEE. ALL RIGHTS RESERVED. 7 Series BMR Thermocouple temperature sensors with connection head Type B with single protection tube preferred for measuring of exhaust temperature in ships and stationary diesel engines. Excellent vibration proof & shockproof. Application Field Diesel engines- generatorsmarine sector 8 Series BMR- Thermocouple temperature sensor with connection head Type B and single protection tube. Preferred for measuring for flue gas temperature in ships with junction box, temperature transmitter and the extension cable. 8 Series BMR- Resistance thermometer with connection head Type B for measuring temperature lubricant oil, fuel oil, water cooling, sea water circulation systems, fluid gas temperature 9 Series BMR- Exhaust gas temperature sensors with protection tube. For measuring and regulation exhaust gas, temperature in stationary and marine. Suitable for measuring diesel engines, turbines and compressors. 9 Series BMR- Resistance thermometer for lubricant oil, water cooling and seawater circulation system. This is the internal element without protecting well (thermowell). 10 Series TWT- Temperature sensors with screwed bar stock thermowell for process technology (chemical and petrochemical plant, pressure vessels, etc.), are preferably used for measuring temperatures in liquids and gasses. 10 Series BM- Resistance thermometer head type B for measuring temperature lubricant oil, fuel oil, water cooling and sea water circulation system. 11 Series BMRM- Resistance thermometer insert type with Terminal head form B suitable for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and marine applications. 11 Series BMRM- Resistance thermometer Insert type with spring pocket for measuring temperature in solids, on closed pipe work for engine room. 12 Series BMRM- Exhaust gas temperature sensors with solid drilled protection tube. For measuring and regulation exhaust gas, temperature in stationary and marine. Suitable for measuring diesel engines, turbines and compressors. 12 Series BMRM-Temperature sensors with screwed bar stock thermowell for cargo oil pumping system, water feed system and medium temperature flow system. 13 Series TWT- Thin line Exhaust gas Temperature sensors with solid drilled protection tube, for measuring and regulation exhaust gas Temperature in stationary and marine suitable for measuring diesel engines, turbines and compressors. 13 Series TWT-B Head - Exhaust gas Temperature sensors with solid drilled protection tube for measuring and regulation exhaust gas Temperature in stationary and marine suitable for measuring diesel engines, turbines and compressors. 14 Series MS- Exhaust gas temperature sensors insert type with miniature socket for measuring and regulation exhaust gas, temperature in stationary and marine diesel engines, turbines and compressors. 14 Series MS Measuring insert for thermocouple and resistance thermometer with terminal head form B. Temperature range -200 to o C 15 Series JG- Resistance thermometer with mini terminal head form J suitable for measuring temperatures of liquids and gases 15 Series CON- Exhaust Gas Temperature sensor for measurement of exhaust temperature in ships and stationary diesel-engines, turbines, compressors and generators with thermocouples up to 900o C 16 Page 3

4 Page 4 Series CON CON 37 Temperature sensors are heavy duty that can be used for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and Marine Application 16 Series CON Resistance thermometer in vibration proof design allow temperature measuring under pressure in motors, compressors, plant engineering and shipbuilding with plug connector to EN Series BMF Thermocouples with terminal head form B. Preferred choice for measuring temperatures in liquids and gases. Application includes heating installations, ovens, furnaces and plant engineering 17 Series BK Incinerator thermocouple with Terminal Head Form KNE. Preferred choice for measuring temperatures of primary and secondary combustion chambers. Application includes Ovens and Furnaces. 18 Series BMF- Duct Resistance thermometer for HVAC 18 Series RM- Outdoor resistance thermometer for HVAC applications mainly used for measuring temperatures outdoors 19 Series RM- Outdoor resistance thermometer for HVAC applications mainly used for measuring temperatures outdoors 19 Series RM- Resistance thermometer suitable for measuring temperatures, in rooms, chill rooms, cargo, refrigerated warehouse and outdoors. 20 Series RM Twin Resistance thermometer 1xPt100 preferred for temperature measurement of water ingress Alarm systems. 20 Series CBRY- Main bearing temperature sensors with cable, quick replacement. The sensors are mounted in the middle of the door. The sensor measures the combined temperature of the bearing shell and the lubrication oil that flows from the bearing 21 Series CBB- Thermocouple Temperature sensor with cable for monitoring bearing temperature 21 Series SUR- Fuel Pump Temperature sensor with Teflon extension cable, is used for measuring temperature on closed pipe work and/or other round surfaces 22 Series SUR- Surface resistance thermometer with silicon extension cable is used for measuring temperatures on closed pipe work and/ or other round surfaces. 22 Series SUR- Pipe contact resistance thermometer with Teflon extension cable is used for temperature detection on pipes and arched surfaces. 23 Series SUR- Surface resistance thermometer with silicon extension cable is used for measuring temperatures on closed pipe work and/ or other round surfaces. 23 Series CBW- Exhaust gas resistance thermometer (2xPt1000) for measurement of exhaust temperature in ships- and stationary diesel-engines, turbines, compressors and generators with resistance thermometer for up to 700 C 24 Series CBW- Exhaust gas temperature sensors for measurement of exhaust temperature in ships- and stationary diesel-engines, turbines, compressors and generators with thermocouples for up to 900 C 24 Series CBW- Thermocouple temperature sensor with cable & single protection tube. Preferred for measuring of exhaust temperature in ships & stationary diesel engines. Excellent vibration proof and shockproof. 25 Series CBWR- Exhaust gas temperature sensors for measurement of exhaust temperature in ships-engines, with thermocouples for up to 800 C 25 Series CBWR- Angle thermocouple temperature sensor with cable and single protection tube. Preferred for measuring temperature, mainly on ships in connection with diesel engines in exhaust system 26

5 Series CBR- Resistance thermometer with connection cable and single protection tube excellent vibration proof and shockproof performances at high temperature, preferred for measuring temperature exhaust system. 26 Series CBR- Thermocouple temperature sensor with cable and single protection tube. Preferred for measuring of exhaust temperature in ships and stationary diesel engines. Excellent vibration proof and shockproof. Application field Diesel engines- Generators- Marine sector. 27 Series MIC- Bearing Resistance Thermometer for medium speed engines. This sensor can withstand vibration and special environments fitted with spring loaded system. 27 Series MIC- Thermocouple temperature sensor with connector type ITT Cannon Preferred for measuring temperature main engine exhaust gas 28 Series MIC Flexible mineral insulated thermometer (type Mantel). Preferred for temperature measurement of temperatures in pipe and tank systems e.g. in oil tankers, or part of a volume measuring system. 28 Series MIC Τriple Thermocouple Temperature sensors. Accurate, Rapid Response for measurements Diesel engine with connector 6 pole 29 Series MIC Double Exhaust gas Temperature sensors. Accurate, Rapid Response for measurement Diesel Engine with connector 4 pole 29 Series INS- Resistance Thermometers for measurement meat and fruit during transportation specially on board ships the operating range is from o C application Marine sector containers. 30 Type UMIC UTECO Mineral insulated 31 Head mounted Analog 3- wire transmitter with digital adjustment d TRANS T03 BU (Type ) - for connection to Pt100 resistance thermometer for installation in: Terminal Head form B to DIN Head mounted transmitter d TRANS T01 Junior (Type ) programmable 2-wire for connection to resistance thermometer and thermocouples to install in: Terminal Head form B to DIN Head mounted transmitter d TRANS T03 J (Type ) Analog 2-wire with digital adjustment to install in Terminal Head form J 33 Head mounted transmitter d TRANS T01 (HART) (Type ) Programmable 2-wire for connection to resistance thermometers and thermocouples and installation in: Terminal Head form B to DIN Head mounted transmitter d TRANS T01 HART (Type ) Programmable 2-wire for connection to resistance thermometers and thermocouple for installation in: Terminal Head form B to DIN Head mounted transmitter d TRANS T01 (Type ) Programmable 2-wire for connection to resistance thermometers and thermocouple for installation in: Terminal Head form B to DIN Head mounted transmitter APAQ-HCF T/C for thermocouple input, 4-20mA output. 35 DIN Rail transmitter dtrans T03T PT100, 4-20mA output 36 DIN Rail transmitter APAQ-LR PT100, 4-20mA output 36 DIN Rail 2-wire transmitter APAQ-LC T/C for thermocouples, 4-20mA output 37 DIN Rail universal-programmable transmitter d TRANS T02 PCP 37 DIN Rail programmable transmitter dtrans T04 4 wire Transmitter, settable via DIP switch/pc setup program (707040) for connection to Pt100/Pt1000 resistance thermometer or potentiometer; rail-mounted to EN Page 5

6 Series TWT- Screw-in pocket for systems where drain- or pressure- less installations/ exchanging of thermocouples or resistance thermometers are required. 39 Series TWT- Screw-in pocket for systems where drain or pressure less installations / exchanging of thermocouples or resistance thermometers. 39 Isolated Barriers for Temperatures Probes 41 Miniature Connector with thermocouple material contacts 42 Standard Connector with thermocouple material contacts 42 Standard panel with Thermocouple material contacts 42 Series MAGN: Level Switches-Magnetic Float with reed relays 43 Series MAGN: Level Switches-Magnetic float UTECO Magnetic float level, suitable for level indication of normal and explosive liquids and can be used for level control tasks 43 Series Conductive - Level sensors for conductive limit value detection 44 Series Conductive - Level sensors for conductive limit value detection 44 ACCESSORIES Connection Head 45 Connection head type XDA ATEX 94/9/EC, 45 Page 6 EN 50018, EN Connection head type KNE 45 Connection head to DIN EN FORM B 45 Connection head type XD-SD 46 Connection head form BUZH 46 Connection head to DIN EN Form A 46 Connection head TYP BBK to DIN EN Form B 47 Connection head form J (miniature head) 47 ACCESSORIES-Cable Gland 48 Temperature measuring transmitter for MSD4 Power connector 4-20 ma or 0-10V 49 Standard Cylindrical Connectors 50 Standard Cylindrical Connectors 50 Standard Cylindrical Connectors 50 COMPENSATING & EXTENSION CABLES 51 HIGH TEMPERATURE CABLES 52 MARINE APPROVED CABLES 53 MARINE APPROVED CABLES 54 DATA CONTROL & HIGH VOLTAGE CABLES 56 INSTRUMENTATION & BUS CABLES 57 INTERNATIONAL COLOR CODE FOR COMPENSATING & EXTENSION CABLES 58 REPRESENTED FIRMS 60 ORDERING FORM 63

7 A few words about this catalogue Dear Customers, You will find below a standardized list of Temperature sensors & Special cables from us, which are always in stock at our warehouse, capable of solving the immediate need of the most demanding applications. The catalogue includes code, type, basic technical description and a photo for visual recognition of our product. Indicative list: Temperature sensors with different measuring range, length, construction material, process connection etc. are also available. Cables with different numbers of cores or pairs, different sections (mm2), insulation or color codes (standard), etc. are also available. If your requests are not covered by this publication, please contact us By phone at Through fax at Or by mail at export@uteco.gr Copyright 2012 UTECO ABEE. All rights reserved. NOTICE: All information contained herein is the property of UTECO ABEE. No part of this publication (whether in hardcopy or electronic form) may be reproduced or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of the Adobe Systems Incorporated. UTECO ABEE and the UTECO ABEE logo are either registered trademarks or trademarks of UTECO ABEE in Greece and/or other countries. All other trademarks are the property of their respective owners. This publication and the information herein is furnished AS IS, is subject to change without notice, and should not be construed as a commitment by UTECO ABEE. UTECO ABEE assumes no responsibility or liability for any errors or inaccuracies, makes no warranty of any kind (express, implied, or statutory) with respect to this publication, and expressly disclaims any and all warranties of merchantability, fitness for particular purposes, and on infringement of third party rights. Image material used in this publication might differ from the actual product depending on the current production line of each manufacture. Page 7

8 Series BMR Thermocouple temperature sensors with connection head Type B with single protection tube preferred for measuring of exhaust temperature in ships and stationary diesel engines. Excellent vibration proof & shockproof. Application Field Diesel enginesgenerators- marine sector M2-1 The measuring insert with thermocouple type K to DIN IEC Class 2. Solid construction with high resistance against vibration according to IEC ungrounded from the bottom Outside diameter: Sheath material: Process connection: Immersion length: Temperature range: Terminal head: Ø12x1.5mm AISI 316 Ti ¾ BSP 80mm, 100mm, 150mm, 200mm, 250mm and 300mm from 0 C to +750 C Type BUZ Cast Aluminum IP65 Other technical characteristics (length, diameter, process connection, etc.) available upon request. Series BMR- Thermocouple temperature sensor with connection head Type B and single protection tube. Preferred for measuring for flue gas temperature in ships with junction box, temperature transmitter and the extension cable. M2-2 The thermocouple insert is fitted with thermocouple Type K according to class 2 to DIN EN Solid construction with high resistance against vibration according to IEC the thermocouple is electrical insulated from the protective tube connected to the process by adjustable compression fitting. Probe diameter: 8x1,5mm Immersion length: 300mm Sheath material: 310 S Process connection: ½ BSP Junction Box: IP65, die cast aluminum Transmitter: 4-20mA APAQ-HC Cable Length: 2m with insulation silicon-glass fiber & steel braid 200 o C Temperature range: from 0 C to 900 C Terminal head: Type BUZ die cast Aluminum IP65 Page 8 Other technical characteristics (length, diameter, process connection, etc.), available upon request.

9 Series BMR- Resistance thermometer with connection head Type B for measuring temperature lubricant oil, fuel oil, water cooling, sea water circulation systems, fluid gas temperature M2-3 Resistance type and tolerances: Outside diameter: Immersion length: Sheath Material: Process connection: Welded Pocket: Temperature range: Terminal head: Resistance thermometer Pt100, Class B, 3 wire system to DIN EN x1.5mm 120mm, 270mm or 320mm AISI 316Ti M24x1.5 Female -See Series TWTfrom 0 C to +650 C Type BUZ die Cast Aluminum IP65 Other technical characteristics (length, Diameter, process connection etc.) available upon request. Series BMR- Exhaust gas temperature sensors with protection tube. For measuring and regulation exhaust gas, temperature in stationary and marine. Suitable for measuring diesel engines, turbines and compressors. M2-4 Resistance type and tolerances: Outside diameter: Sheath material: Process connection: Immersion Length: Temperature range: Terminal head: Resistance thermometer PT100, Class B, 3 wire system as per DIN EN mm or 15mm AISI 316 Ti G ¾ 80mm, 100mm, 110mm, 150mm, 200mm, 250mm, 300mm from -50 C to +650 C Cast Aluminum IP65 Other technical characteristics (length, diameter, process connection etc.), available upon request. Page 9

10 Series BMR- Resistance thermometer for lubricant oil, water cooling and seawater circulation system. This is the internal element without protecting well (thermowell). M2-5 The measuring insert is fitted with resistance thermometer 1xPt100 to DIN EN Class B with 3 wire system. The protecting well diameter 12,7mm for length 80, 100, 120 and 150mm. The protecting well diameter 13,8mm for length 200mm, 250mm and 300mm. Outside diameter: Sheath material: Process connection: Immersion Length: Temperature range: Terminal head: 7mm AISI 316 Ti G ¾ 80mm, 100mm, 120mm, 150mm, 200mm, 250mm, 300mm +5mm(for all length) 0 C to +200 C Form BUZ IP65 cast aluminum. Other technical characteristics (length, diameter, process connection, etc.), available upon request. Series TWT- Temperature sensors with screwed bar stock thermowell for process technology (chemical and petrochemical plant, pressure vessels, etc.), are preferably used for measuring temperatures in liquids and gasses. M2-6 Page 10 The measuring insert is fitted with resistance thermometer PT100 to DIN EN 60751, CLASS A with 2,3 or 4 wire system. With replaceable measuring insert D6mm (mineral insulated cable). Stem diameter under thread: 18mm Tip diameter: 14mm Tip thickness: 4mm Immersion length: 100mm Extension length: 100mm Connection head: weather proof, cast-aluminum IP65, Form EExd Ambient temperature: from -20 C to +130 C Process connection: R ½ NPT Sheath Material: AISI 316L Bore: 7mm Available with 2-wire transmitter (4-20mA/HART/In Ex version) Other technical characteristics (length, diameter, process connection, etc.), available upon request.

11 Series BM- Resistance thermometer head type B for measuring temperature lubricant oil, fuel oil, water cooling and sea water circulation system. M2-7 Resistance type and tolerances: Outside diameter : Probe Length: Sheath material: Temperature range: Terminal head: Resistance thermometer 1x Pt100 Class A, single or double to DIN IEC ,3,4 or 6 wire system version with Ni100, Pt1000, T802Ω can also be supplied. 9.5mm 80mm,125mm,150mm,200mm or 250mm AISI 316L From -50 to +200 o C Type BUZ - IP65 die cast aluminum Other technical characteristics (length, diameter, etc.) available upon request. Series BMRM- Resistance thermometer insert type with Terminal head form B suitable for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and marine applications. M2-8 Resistance type and tolerances: Resistance thermometer PT100, Class B, DIN EN Single or double, available with 2,3 or 4 wire circuit. Outside diameter : 10mm x 2mm Sheath material : AISI 316 Ti Process connection: G ½ A or G¾ A Immersion length: 50mm,80mm,100mm,150mm,200mm Extension length: 50mm Temperature range: o C Vibration stability: shock 100g in 6ms vibration 4g sine function 2-100Hz Terminal head : Cast Aluminum Type B - IP65 Available with temperature transmitter 4-20 ma supply voltage 8-35 V DC Other technical characteristics (length, diameter, process connection, sensor tolerance etc.) available upon request. Page 11

12 Series BMRM- Resistance thermometer Insert type with spring pocket for measuring temperature in solids, on closed pipe work for engine room. M2-9 Resistance type and tolerances: Resistance thermometer 2ΧPT100, Class Α, DIN EN with 2 wire circuit. Outside diameter : 11mm Sheath material : Bronze Immersion Length: 33mm Process connection: ½ BSP Terminal Head: Cast Aluminum form BUZ IP65 Temperature range: o C Other technical characteristics (length, diameter, process connection, etc.) available upon request. Series BMRM- Exhaust gas temperature sensors with solid drilled protection tube. For measuring and regulation exhaust gas, temperature in stationary and marine. Suitable for measuring diesel engines, turbines and compressors. M2-10 Page 12 PT100 Thin film Technology specially developed for heavy duty application. Screwed bar stock thermowells with tapered stem. Resistance type and tolerance: Resistance thermometer PT100, CLASS B, DIN/IEC 60751, 2 wire or 3 wire system. Stem diameter under thread: 24mm Tip diameter: 14mm Tip thickness: 4mm Extension length: 50mm or 100mm Immersion length: 80mm, 100mm, 150mm, 200mm, 250mm Connection head: weatherproof, heavy duty head with screw on cover IP65 Temperature range: from 0 to +650 C Sheath Material: AISI 316 Bore: 9mm Other technical characteristics (length, diameter, process connection etc.), available upon request.

13 Series BMRM-Temperature sensors with screwed bar stock thermowell for cargo oil pumping system, water feed system and medium temperature flow system. M2-11 The measuring insert is fitted with resistance thermometer PT100 to DIN EN 60751, CLASS A With 3 or 4 wire system with replaceable measuring insert D6mm Stem diameter under thread: Immersion length: Connection head: Process connection: Sheath Material: 10mm 16mm Weatherproof with screw on cover, cast-aluminum IP65, explosion proof EExd IICT6 M22X1,5mm AISI 316L Other technical characteristics (length, diameter, process connection, etc.), available upon request. Series TWT- Thin line Exhaust gas Temperature sensors with solid drilled protection tube, for measuring and regulation exhaust gas Temperature in stationary and marine suitable for measuring diesel engines, turbines and compressors. M2-12 Resistance type and tolerance: resistance thermometer PT100 CLASS B 3 wire system to DIN/EN Stem diameter under thread: 24mm Tip diameter: 14mm Bore: 9mm Tip thickness : 4mm Immersion length: 80, 100,120,150,170,200,250 or 300mm Extension length : 50mm Process connection : G 3/4 A Hex 32 Sheath Material : AISI 316L Connection head: weather proof, IP65 Thinline Temperature range : From 0 to 650 o C Other technical characteristics (length, diameter, Process connection, etc.) available upon request Page 13

14 Series TWT-B Head - Exhaust gas Temperature sensors with solid drilled protection tube for measuring and regulation exhaust gas Temperature in stationary and marine suitable for measuring diesel engines, turbines and compressors. M2-13 Resistance type and tolerance: Resistance thermometer PT100 CLASS B 3 wire system to DIN EN Stem diameter under thread: 24mm Tip diameter: 14mm Bore: 9mm Tip thickness : 4mm Immersion length: 80, 100,120,150,170,200,250 or 300mm Extension length : 50mm or 100mm Process connection : G 3/4A Hex 32 Sheath Material : AISI 316L Connection head: Cast Aluminum, Weather proof, IP65 Temperature range : 0-650o C Other technical characteristics (length, diameter, Process connection, etc.) available upon request Series MS- Exhaust gas temperature sensors insert type with miniature socket for measuring and regulation exhaust gas, temperature in stationary and marine diesel engines, turbines and compressors. M2-14 Resistance type and tolerance: Probe outer diameter: Immersion length: Terminal blocks: Temperature range: Resistance thermometer PT100, CLASS B, to DIN/ EN 60751, 2 wire or 3 wire system. 8.0mm 150mm, 170mm, 190mm, 250mm form J ceramic Ø25.1mm (miniature socket) from 0 to +650 C Other technical characteristics (length, diameter), available upon request. Page 14

15 Series MS Measuring insert for thermocouple and resistance thermometer with terminal head form B. Temperature range -200 to o C M2-15 The measuring inserts are normally fitted with a temperature sensor PT100 to DIN EN 60751, CLASS B with 2, 3 or 4 wire system. The measuring insert with thermocouple Type K is according to Class 2 of DIN EN Tube diameter: Immersion length: Terminal block: Temperature range: 3mm, 4,5mm, 6mm, 8mm 170mm, 220mm, 315mm, 385mm, 405mm form B Diameter 42mm from -200 to C Available with transmitter output 4-20 ma or 0-10 V Version with PT500 or PT1000 can also be supplied. Also as single or twin insert. Other technical characteristics (length, diameter, etc.), available upon request. Series JG- Resistance thermometer with mini terminal head form J suitable for measuring temperatures of liquids and gases M2-16 Resistance type and tolerances: Resistance thermometer PT100, Class A, DIN EN 60751, 2, 3, or 4 wire system Outside diameter: 7mm Sheath material: AISI 316 Ti Process connection: G 1/2 Immersion length: 50mm Temperature range: from -50 C to +260 C Terminal head: mini terminal head form J Pg9, IP54 Other technical characteristics (length, diameter, connector, etc.), available upon request. Page 15

16 Series CON- Exhaust Gas Temperature sensor for measurement of exhaust temperature in ships and stationary diesel-engines, turbines, compressors and generators with thermocouples up to 900o C M2-17 The measuring insert is fitted with thermocouple type K, tolerance EN , CLASS 1, 1xNiCr Ni Tube diameter: Immersion length: Gasket Temperature range: Connector: 4.5mm 133mm Ø 14x10x7/3mm o C Jaeger 6 pole male Other technical characteristics (Length, diameter, etc), are also available upon request Series CON CON 37 Temperature sensors are heavy duty that can be used for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and Marine Application M2-18 The measuring insert is fitted with resistance thermometer PT100 to DIN EN 60751, CLASS B with 2 or 3 wire systems. Gold plated male and female connector CON 37 with interchangeable measuring insert. Diameter: Immersion length: Process connection: Temperature range: Coupling: 8mm 50mm,150mm, 200mm G1/2, G3/4A,G1/4 or ½-14 NPT from -50 to +260 C DIN 43650/PG 13.5mm Page 16 Other technical characteristics (length, diameter, process connection, etc.), available upon request.

17 Series CON Resistance thermometer in vibration proof design allow temperature measuring under pressure in motors, compressors, plant engineering and shipbuilding with plug connector to EN With protection class IP 65 when connected vibration proof design: German Lloyd, application category D Characteristic line 2 M2-19 The measuring insert is fitted with resistance thermometer 1xPt100 2, 3 or 4 wire system class A to DIN IEC60751 with connection socket pg9 to EN Outer Diameter: Immersion length: Process connection: Temperature range: 8mm 50mm,100mm,150mm, 200mm Thread G 1/2, or G 1/4, G 3/8, M18x1.5, M20x1.5m thread from -50 to +260 C Other technical characteristics (length, diameter, process connection, etc.), available upon request Series BMF Thermocouples with terminal head form B. Preferred choice for measuring temperatures in liquids and gases. Application includes heating installations, ovens, furnaces and plant engineering M2-20 The measuring insert is fitted with thermocouple according to Class 2 to DIN EN Probe diameter: 15x2mm Sheath material: No Process connection: stop flange 15mm dia DIN Probe length: 250mm, 500mm, 710mm, 1000mm, 1400mm Temp. range: from 0 to C Terminal head: form B DIN Aluminum die casting IP54 Transmitter: Programmable Transmitter, Output 4-20ma/20-4 ma can also be supplied Other technical characteristics (length, diameter, process connection etc.) available upon request. Page 17

18 Series BK Incinerator thermocouple with Terminal Head Form KNE. Preferred choice for measuring temperatures of primary and secondary combustion chambers. Application includes Ovens and Furnaces. M2-21 The measuring insert is fitted with thermocouple according to Class 2 to DIN EN Ceramic probe outer diameter: 10x2mm, 15x2mm Metallic support tube: 15mm ( for ceramic tube 10mm) 22mm ( for ceramic tube 15mm ) Process connection: Screwed pipe point ¾ BSP Ceramic Material: C799 (KER 710) Probe total length: 250mm, 370mm,500mm,710mm Temp. range: from 0 to C Terminal head: weather proof with screw on cover and chain Other technical characteristics (length, diameter, process connection, etc.), available upon request. Series BMF- Duct Resistance thermometer for HVAC M2-22 The measuring insert is normally fitted with a Pt100 or Pt1000 Temperature Sensor to DIN IEC60751 Class A in 2-wire, 3-wire and 4-wire circuit. Terminal Box: Plastic PVC housing IP65 Protection Tube: Stainless steel 1,4571 diameter 8mm Immersion length: 200mm Transmitter: analog transmitter, output 4 20 ma or 0-10V Other versions available with Pt500, Ni 1000, Ni 120, NTC 10 KΩ, KTx 11-6 can also be supplied. Page 18 Other technical characteristics (length, diameter, etc.), available upon request.

19 Series RM- Outdoor resistance thermometer for HVAC applications mainly used for measuring temperatures outdoors M2-23 The measuring insert is normally fitted with a Pt100 or Pt1000 Temperature Sensor to IEC 951 Class A in 2-wire, 3-wire and 4-wire circuit. Resistance type and tolerances: Resistance thermometer Pt100 or Pt1000 class A accuracy ±0,150 C to 0 C, IEC751 3-wire system Terminal Box: Plastic PC housing IP65 Transmitter: analog transmitter, output 4 20 ma or 0-10V Versions: Pt500, Ni1000, Ni120, or NTC10KΩ can also be supplied Series RM- Outdoor resistance thermometer for HVAC applications mainly used for measuring temperatures outdoors M2-24 Resistance type an tolerance thermometer P+100 or P+1000 class A accuracy ±0,15 C to DIN IEC 60751, 2 or 3 system wire Terminal box: Material PA6, Color: pure white similar to RAC 9010 Cable entry: PE 14 Protection: IP65 Terminal Clamp: Screwing terminal max 1,5mm2 Version Pt500, Ni 1000, NTC 10KΩ, KTY 21-5 can also be supplied Cable length: 3m Cable insulation: PVC-PVC (3 x 0,35mm²) Page 19

20 Series RM- Resistance thermometer suitable for measuring temperatures, in rooms, chill rooms, cargo, refrigerated warehouse and outdoors. M2-25 The measuring insert is normally fitted with a Pt100 Temp. Sensor to DIN EN Class 1/3 or 1/6DIN in 3-wire, 4-wire and 6-wire circuit, single or duplex resistance thermometer. Connection Box: Material Aluminum, Protection IP65 Protection Tube: round 14mm stainless steel perforated with open end Measuring Insert: Pt100 1/3B or 1/6B DIN Transmitter: analog transmitter, output signal 4 20 ma or 0-10V Response time: Mean Values-measured at velocities in Water at 0.4m/s t0.5=11sec Air at 3.0m/s t0.5=35sec Series RM Twin Resistance thermometer 1xPt100 preferred for temperature measurement of water ingress Alarm systems. M2-26 Resistance thermometer 1xPt100 Class A, 2 wire systems to DIN EN Probe diameter: 2mm or 7mm Probe Length: 50mm Protection tube: St. St Process Connection: 1/8 NPT Bare end: 70mm with insulation Teflon 2x0.22mm 2 Temperature range: o C Response time: Within 5 sec Ingress Protection: IP68 Page 20

21 Series CBRY- Main bearing temperature sensors with cable, quick replacement. The sensors are mounted in the middle of the door. The sensor measures the combined temperature of the bearing shell and the lubrication oil that flows from the bearing M2-27 Resistance thermometer PT100 to DIN IEC 60751, Class A, 3 wire system. Dimension of Case : Cable Insultation: Temperature range : 63x42x31mm or 121x33x150mm PVC-PVC (3x0,34mm2) C Other technical characteristics (Dimensions, cable length, insulation cable etc.) available upon request Series CBB- Thermocouple Temperature sensor with cable for monitoring bearing temperature M2-28 The measuring insert is fitted with thermocouple (mineral insulated cable) to type K single to DIN IEC CLASS 1. Tube Diameter: Immersion Length under the o-ring : Process connection: Material probe: Compensating cable: Temperature range: 3mm 34 or 80mm Bayonet lock Ø10mm 316L Teflon/braiding/Teflon 2X0,5mm o C Other technical characteristics (length, diameter, process connection, etc.) available upon request Page 21

22 Series SUR- Fuel Pump Temperature sensor with Teflon extension cable, is used for measuring temperature on closed pipe work and/or other round surfaces M2-29 Resistance thermometer PT100 to DIN IEC 60751, Class B available with 2, 3 or 4 wire circuit Probe length: Protection: Cable insulation : 55mm IP67 Teflon-braiding- Teflon (3x0,5 mm2) Other technical characteristics (Other Version -PT1000, 2XPT100, Ni1000, NTC 10KΩ, cable length, insulation cable, etc.) available upon request Series SUR- Surface resistance thermometer with silicon extension cable is used for measuring temperatures on closed pipe work and/ or other round surfaces. M2-30 Resistance thermometer PT100 to DIN IEC 60751, CLASS A or B Available with 2, 3 or 4 wire circuit Probe length: Protection: Cable insulation : 50mm IP67 Silicon- Teflon (3 x 0,5mm²) Page 22 Other technical characteristics (Other versions - Pt1000, Pt500, Ni1000, cable length, insulation cable temperature etc.) available upon request

23 Series SUR- Pipe contact resistance thermometer with Teflon extension cable is used for temperature detection on pipes and arched surfaces. M2-31 Resistance thermometer Pt100 to ICE 751 class B to DIN EN available with 2, 3 or 4 wire system. Protection fitting: Cable insulation : Stainless steel Teflon Braided Teflon (4x0,22mm2) Other versions available with Pt1000, Pt500, Ni1000, Ni120, NTC 10KΩ etc. (available with single or twin resistance thermometer) Series SUR- Surface resistance thermometer with silicon extension cable is used for measuring temperatures on closed pipe work and/ or other round surfaces. M2-32 Resistance thermometer PT100 to DIN IEC 60751, CLASS A or B Available with 2, 3 or 4 wire circuit Probe dimension 15x50x8mm Immersion length: 50mm Protection: IP 55 Material: AISI 304 Cable insulation : ETFE (3x0,75mm2) Cores: Tin plated copper (TRC) Insulation ETFE Screen: Tin plated copper drain wire beneath braid of tin plated copper wire (85% min coverage) Sheath: ETFE Suitable for oil and chemical resistant and flame retardant to IEC The cable has been approved by a number of international recognized bodies including ABS, DNV, GL and NKK Other technical characteristics (Other versions - Pt1000, Pt500, Ni1000, cable length, insulation cable temperature etc.) available upon request Page 23

24 Series CBW- Exhaust gas resistance thermometer (2xPt1000) for measurement of exhaust temperature in ships- and stationary diesel-engines, turbines, compressors and generators with resistance thermometer for up to 700 C M2-33 The measuring insert is fitted with resistance Pt1000 to DIN EN CLASS B with 2, 3 or 4 wires system. Probe Diameter: 4,5mm Probe Length: 130mm Gasket: Ø16x6mm Sheath Material AISI 316Ti Extension cable: Teflon-Braiding-Teflon (4x0.22mm 2 ) Temperature Up to 700 o C Other technical characteristics (length, diameter, cable Length etc.) available upon request Series CBW- Exhaust gas temperature sensors for measurement of exhaust temperature in ships- and stationary diesel-engines, turbines, compressors and generators with thermocouples for up to 900 C M2-34 The measuring insert is fitted with thermocouple type K, Tolerance DIN IEC CLASS 2 (1xNICR NI) Page 24 Tube Diameter: 6.0mm or 4,8mm Probe Length: 50mm,80mm, 127mm,140mm, or 170mm Gasket: Ø16x9.8x7x8mm Extension cable: KAPTON-KAPTON-Braiding 2x0,5mm Ambient temp. cable 300 C Temperature: C Other technical characteristics (length, diameter, cable Length etc.) available upon request

25 Series CBW- Thermocouple temperature sensor with cable & single protection tube. Preferred for measuring of exhaust temperature in ships & stationary diesel engines. Excellent vibration proof and shockproof. Application field: Diesel engine- Generators- Marine sector M2-35 The measuring insert in fitted with thermocouple Type K to DIN IEC Class 2 solid construction with high resistance vibration according to IEC unground from the bottom, straight or angle form. Probe Diameter: 9.5mm Immersion Length: 186mm, 236 mm, 286 mm, 316 mm Protection: IP65 Temperature: Up to +800 C Cable insulation: Silicone-Fiberglass-Braiding Other technical characteristics (length, diameter, process connection, cable length etc.) available upon request Series CBWR- Exhaust gas temperature sensors for measurement of exhaust temperature in ships-engines, with thermocouples for up to 800 C M2-36 The measuring insert is fitted with thermocouple type K, Tolerance to DIN EN CLASS 1. Hot junction isolated from the ground. Tube Diameter: 6.0mm Horizontal length : 60mm Vertical length: 100mm Ring : SSØ9.5mm Length under ring : 80mm Process Connection: M11x1,25mm Material : ST.ST Extension cable: KAPTON+KAPTON+ Steel coating connector output DTO42P Probe Length: 186mm, 236 mm, 286 mm, 316 mm Protection: IP67 Temperature: from 0 to -800 C Compensating cable: Silicone-Fiberglass-Braiding Other technical characteristics (length, diameter, connector etc.) available upon request Page 25

26 Series CBWR- Angle thermocouple temperature sensor with cable and single protection tube. Preferred for measuring temperature, mainly on ships in connection with diesel engines in exhaust system M2-37 The measuring insert is fitted with Thermocouple (mineral insulated cable) to type K (double) to DIN IEC Class 2. Tube diameter : Probe Length : Process Connection: Process connection: Material : Compensating cable: Termination: Temperature range: 12/10mm 110mm ½ BSP M24x1.5Fem AISI 316L made from solid bar stock Fiberglass-Fiberglass-Braiding with covered eith stainless steel flexible armour 6 pole female connector (jaeger) o C Other technical characteristics (length, diameter, process connectors, etc.) available upon request Series CBR- Resistance thermometer with connection cable and single protection tube excellent vibration proof and shockproof performances at high temperature, preferred for measuring temperature exhaust system. M2-38 The measuring insert is fitted with resistance thermometer PT100 to DIN IEC 60751, Class B to IEC 751, with 3 wire system. Tube diameter : 12mm Probe Length : 105mm Process Connection: ½ BSP Protection tube: stainless steel Protection : IP67 Cable insulation: Teflon-braiding- Teflon (4x0.5mm2) Temperature range: Up to 700 o C Page 26 Other technical characteristics (length, diameter, process connection etc.) available upon request

27 Series CBR- Thermocouple temperature sensor with cable and single protection tube. Preferred for measuring of exhaust temperature in ships and stationary diesel engines. Excellent vibration proof and shockproof. Application field Diesel engines- Generators- Marine sector. M2-39 The measuring insert is fitted with thermocouple to Type K to DIN IEC class 2. Solid construction with high resistance against vibration according to IEC ungrounded from the bottom. Probe diameter: Immersion Length: Process Connection: Sheath Material: Compensating cable: Temperature range: Cones 12.5x 8.5mm 100mm or 150mm ½ BSP, ¾ BSP or M 18x 1.5 (Compressing Fitting) AISI 316Ti Silicon-fiberglass-Braiding 2x1.5mm 2 or4x1.5mm 2 Up to 800 o C Other technical characteristics (length, diameter, process connection, cable length etc.) available upon request Series MIC- Bearing Resistance Thermometer for medium speed engines. This sensor can withstand vibration and special environments fitted with spring loaded system. M2-40 The measuring insert is fitted with resistance thermometer PT100, to DIN/IEC 60751, CLASS A, 3 Wire system Tip diameter : 6mm Tip length: 16mm (end tip) Sheath Material: AISI 316L Extension length: 1150 or 580mm Mechanical connection: M18x1,5mm Probe length: 20 or 25mm (end tip) Connector Jaeger 3 pole male Insulation: >100MΩ 500 V DC Response time : at 63% 1,6 sec at 90% 3.6 sec Process Connection: M10x1 Springloaded: 42mm Other technical characteristics (length, diameter, process connection etc.) available upon request Page 27

28 Series MIC- Thermocouple temperature sensor with connector type ITT Cannon Preferred for measuring temperature main engine exhaust gas M2-41 The Measuring insert is fitted thermocouple type K to DIN IEC Tube Diameter: 5.5 mm Process Connection : M12x1.0 mm Probe Length: 133 mm Material Inconel: 600 Extension probe: Flexible mineral insulated thermocouple Connector: ITT Cannon, 5 pole (type Mantel) Length: 1500mm Temperature range: oC Other technical characteristics (length, diameter, connector etc.) available upon request Series MIC Flexible mineral insulated thermometer (type Mantel). Preferred for temperature measurement of temperatures in pipe and tank systems e.g. in oil tankers, or part of a volume measuring system. M2-42 Resistance thermometer Pt100 Class A ± 0.15 at 0 C according to DIN IEC 60751, 3wire or 4wire system Probe Diameter: 3mm, 4.5mm Process Connection : 1/8 BSP (male) adjustable Response Time: (main values) measured at velocities in water 0.4m/s t 0.5=11sec Sheath Material: AISI 316 Connecting Cable: Teflon: ambient temp. -50 C to +260 C Page 28 Other technical characteristics (length, diameter, connector etc.) available upon request

29 Series MIC Τriple Thermocouple Temperature sensors. Accurate, Rapid Response for measurements Diesel engine with connector 6 pole this product M2-43 The measuring insert is fitted with thermocouple Type K according to DIN IEC Class 1 Probe Diameter: 2mm Immersion length: 145mm Sheath Material: Inconell 600 Process Connection: M8x1 Termination: 6 pole Female Connector (Jaeger) Temperature: C Compensating Cable: Teflon-braiding-Teflon with flexible armour Other technical characteristics (Cable length, diameter, length etc.) available upon request Series MIC Double Exhaust gas Temperature sensors. Accurate, Rapid Response for measurement Diesel Engine with connector 4 pole this product M2-44 The measuring insert is fitted with thermocouple Type K according to DIN IEC Class 1 Probe Diameter: 2mm Immersion length: 195mm Sheath Material: Inconell 600 Process Connection: Bayonet Lock Termination: 4 pole Female Connector (Jaeger) Temperature: C Compensating Cable: Teflon-braiding-Teflon with flexible armour Other technical characteristics (Cable length, diameter, length etc.) available upon request Page 29

30 Series INS- Resistance Thermometers for measurement meat and fruit during transportation specially on board ships the operating range is from o C application Marine sector containers. M2-45 The measuring insert is normally fitted with Pt100 resistance thermometer according to DIN IEC wire or 4 wire systems. A±(0.15 o C x t actual) o C Tolerance class: 1/3 class B ±(0.10 o C x t actual) o C 1/6 Class B A±(0.05 o C x t actual) o C Probe diameter: 6mm Immersion length: 90mm Cable insulation: Rubber cable 1.5 mm 2 Protection tube: AISI 316Ti, needle shaped with handle Temp. range: C Junction Box: IP65, die cast aluminum Solid construction with high resistance against vibration according to IEC Version available with cable and connection box. Other technical characteristics (length, diameter, cable length etc.) available upon request Page 30

31 Type UMIC UTECO Mineral insulated Application : Element : Tube : Cables: Measurement of temperature in pipe, gases, containers and tank system for mounting directly or in thermowells Mineral insulated Resistance thermometer 1xPt100 or 1xPt1000 class B to DIN EN wire or 4 wire system Protective sheath of Ø3.2mm or 4.5mm annealed stainless steel, Length on request Sensor tip Ø6x60mm or Ø8x100mm The connecting wires are available in Teflon-braiding- Teflon 4x0.22mm 2 Process Connect: Mounting by compression fitting with 1/8 NPT Thread (mean values) measured at velocities in (for tip Ø6x50mm) Response time: Water at 0,4m/S t0,5=7sec - t0,9=27sec Air at 3,0/S =7sec t0,5=24sec Recommended measuring current: max 2mA Type UMIC UTECO Mineral insulated Length/L1/ mm Min.50mm Max.35000mm Optional Length... x 1 Cable material /Temperature o Diam/wall thickness /mm Φ 3.2x0.4mm Φ 4.8x0.4mm Φ 6x0.5mm Φ 8x1mm Tolerance Class/DIN.Class A ± 0.15 o C.Class B ± 0.3 o C.Class 1/3 DIN ± 0.1 o C.Class 1/6 DIN ± 0.05 o C Mounting thread 1/8 NPT 3/8 BSP ½ BSP ¾ BSB Resistance in ohms at o C.Pt100.Pt1000 Number of Conductor 2 Cond 3 Cond 4 Cond Number of elements..1xpt X Cable Length 250mm 500mm 1m 2m 3m Optional length M2-46 Page 31

32 Head mounted analog 2-wire transmitter with digital adjustment d TRANS T03 for connection (Type ) to Pt100 resistance thermometer for installation in: Terminal Head form B to DIN M2-47 Analog 2-wire transmitter with digital adjustment for installation in terminal head Form B Input: Output: Operating temperature range: Supply Voltage: Pt100, 3-wire 4-20 ma o C V DC Standard accessories 1 operating instruction Fixing items (2 screws, 2 pressure spring) Accessories PC setup program, multilingual PC interface (electrically isolated) with TTL/RS232 converter, power supply (230V AC) and adapter (socket) PC interface (electrically isolated) with TTL/RS232 converter, power supply (115V AC) and adapter (socket) supply units 1-way and 4-way (Data Sheet ) isolating amplifier and supply isolator (Data Sheet ) supply unit for transmitters (Data Sheet ) Head mounted Analog 3- wire transmitter with digital adjustment d TRANS T03 BU (Type ) - for connection to Pt100 resistance thermometer for installation in: Terminal Head form B to DIN M2-48 Analog 3-wire transmitter with digital adjustment for installation in terminal head Form B Input: Pt100, 3-wire Output: 0-10V Operating temperature range: o C Supply voltage: V DC Page 32 Standard accessories & Accessories As above

33 Head mounted transmitter d TRANS T01 Junior (Type ) programmable 2-wire for connection to resistance thermometer and thermocouples to install in: Terminal Head form B to DIN Input thermocouple: J, K, S,R, N, DIN EN Resistance thermocouple: Pt100 DIN EN Pt100 JIS Pt1000 DIN Connection circuit: 2,3 or 4-wire circuit Output: 4-20mA Operating temperature Range: C Supply Voltage: DC V Standard accessories 1 operating instruction B Fixing items (2 screws & 2 compression springs) Accessories PC setup program, multi-lingual PC interface with USB/TTL converter, adapter supply units 1- and 4-way isolating amplifier and supply isolator M2-49 Head mounted transmitter d TRANS T03 J (Type ) Analog 2-wire with digital adjustment to install in Terminal Head form J M2-50 Input: Connection circuit Mounting Output: Operating temperature range: Supply voltage: Pt100 2 wire terminal head Form J 4-20mA -40 to +85 C V DC Standard accessories Operating instruction Fixing items Accessories PC setup program, multilingual PC interface cable (isolated) with TTL/RS 232 converter, power supply (230V AC) and adapter. Page 33

34 Head mounted transmitter d TRANS T01 (HART) (Type ) Programmable 2-wire for connection to resistance thermometers and thermocouples and installation in: Terminal Head form B to DIN M2-51 Input: Thermocouple L, J, U, T, E, B, D, C, K, S,R, N, DIN EN Resistance thermocouple: Ni100 Ni500 Ni1000 Pt100 DIN EN Pt100 JIS Pt500 DIN Pt1000 DIN Connection circuit 2, 3 or 4 wire circuit Output: 4-20mA Operating temperature Range: C Supply voltage: 10 35VDC Standard accessories 1 operating instruction B Fixing items :2 screws & 2 compression springs Accessories PC setup program, multi-lingual HART modem (sales No.40/ ) supply units 1- and 4-way (JUMO Datasheet ) Supply unit isolating transformer-with HART capability (JUMO Datasheet ) Head mounted transmitter d TRANS T01 HART (Type ) Programmable 2-wire for connection to resistance thermometers and thermocouple for installation in: Terminal Head form B to DIN M2-52 Page 34 Input: Thermocouple L, J, U, T, E, B, D, C, K, S,R, N, DIN EN Resistance thermocouple: Pt1000 DIN Ni100 Ni500 Pt100 DIN EN Pt100 JIS Pt500 DIN Ni1000 Connection circuit 2,3 or 4-wire circuit Output: 4-20mA Operating temperature Range: C Supply voltage: 10 30V DC Certificates: II GEx ia IIC T6/T5/T4 II 2GEx ia IIc T6/T5/T4 Standard accessories 1 operating instruction Fixing items : 2 screws & 2 pressure springs Accessories PC setup program, multi-lingual HART modem USB Supply isolator for transmitter with 2-wire connection, HART capable (Jumo Datasheet )

35 Head mounted transmitter d TRANS T01 (Type ) Programmable 2-wire for connection to resistance thermometers and thermocouple for installation in: Terminal Head form B to DIN M2-53 Input: Thermocouple L, J, U, T, E, B, D, C, K, S,R, N, DIN EN Resistance thermocouple: Ni100 Ni500 Ni1000 Pt1000 DIN Pt100 DIN EN Pt100 JIS Pt500 DIN Connection circuit 2, 3 or 4 wire circuit Output: 4-20mA Operating temperature Range: C Supply Voltage: 8 30V DC Certificates: II 1GEEx ia IIC T6/T5/T4 Standard accessories 1 operating instruction & Fixing items : 2 screws & 2 pressure springs Accessories PC setup program, multi-lingual - PC interface cable with TTL/RS 232 con & adapter Head mounted transmitter APAQ-HCF T/C for thermocouple input, 4-20mA output. M2-54 Input: Thermocouples selectable: type J, L, T, K and N with ranges within -5 to +55 mv Input: impedance: >5 MΩ Input: Max. sensor wire resistance: 500 Ω (total loop) Monitoring: Sensor break detection, selectable: Upscale ~25 ma, downscale ~3 ma Adjustments: Span, selectable: 10 to 50 mv Adjustments: Span, fine adjustment: ±10 % Output: Current: 4-20 ma Output: Current limitation: ~ 25 ma Output: Permissible load: VDC, 25 ma Temperature: Ambient, operating: -40 C to +85 C Response time 10-90%: 0.2 s Power supply voltage: 6.5 to 32 VDC (polarity protected) Permissible ripple: 4 50/60 Hz Linearity (ma output to mv input): ±0.1 % of mv span Calibration ±0.1 % of span Material / Flammability(UL): Zinc alloy + ABS / V0 Mounting: DIN B-head or larger Connection, single/stranded wires: 2.5 mm2, AWG 14 Protection, housing with cover/terminals: IP 20 / IP 10 Page 35

36 DIN Rail transmitter dtrans T03T PT100, 4-20mA output M2-55 Transmitters T03T are designed for industrial applications, used to measure temperatures through Pt100 resistance thermometers in 2-/3-wire circuit connections. Output 4-20mA is linear with temperature calibration / configuration of the transmitter from a PC using Jumo s setup program for adjustable / configurable parameters. It features fine calibration / adjustment of the output signal of a transmitter. Input: Analogue output: Supply voltage: Calibration / configuration accuracy: Pt100 (EN 60751) from -200 C to +850 C 4-20mA 7,5 30 V DC ±0,2% or ±0,2 C Accessories PC setup program, multilingual PC interface (electrically isolated) with TTL/RS232 converter, power supply (230V AC) and adapter (socket) PC interface (electrically isolated) with TTL/RS232 converter, power supply (115V AC) and adapter (socket) DIN Rail transmitter APAQ-LR PT100, 4-20mA output M2-56 Page 36 Input: Pt100 3-wire connection Sensor Failure upscale, downscale Fine adjustment: ± 10% Zero: from -50 C to +50 C (from -60 F to +120 F) Output: 4-20 MA Operating temperature: from -20 C to +70 C Galvanic isolation: NO Power supply: from 6,5 to 32VDC Typical accuracy: ± 0,15% of temperature span Input: Pt100 3-wire connection

37 DIN Rail 2-wire transmitter APAQ-LC T/C for thermocouples, 4-20mA output M2-57 Input: T/C J,L,T,K,N Sensor Failure upscale, downscale Span: from 10 to 50MV continuously Fine adjustment: ± 10% Output: 4-20 MA Operating temperature: from -20 C to +70 C Galvanic isolation NO Power supply: from 6,5 to 32VDC Typical accuracy: ±0,5% to ±1,0% of temperature span DIN Rail universal-programmable transmitter d TRANS T02 PCP M2-58 The dtrans T02 PCP is a digital 4-wire transmitter/signal conditioner with isolation of the standard signal, custom linearization, 2 alarms, 2 LEDs and fine adjustment with 2 push buttons or the setup program. Features excellent long-term stability and probe break and short circuit detection. Utilization of setup software allows true online communication with display of actual value. Accessories Input: TC, RTD, voltage, current, resistance transmitter, potentiometer Analog Output: 0-20mA or 4-20mA or 0-10V or 2-10V Digital Output: alarm: 2 open-collector outputs switching capacity: 35V, 100mA Supply: 20-53V AC/DC or V AC Setup program, multilingual 70/ PC interface with TTL/RS232 converter and adapter (socket) 70/ PC interface with USB/TTL converter, adapter (socket) and adapter (pins) 70/ Page 37

38 DIN Rail programmable transmitter dtrans T04 4 wire Transmitter, settable via DIP switch/pc setup program (707040) for connection to Pt100/Pt1000 resistance thermometer or potentiometer; rail-mounted to EN M2-59 The transmitters intended for industrial applications record the temperature or the resistance with an RTD temperature probe Pt100, Pt1000, or a potentiometer in 2-wire or 3-wire connection. The continuous analog signal path allows for fast output reaction times in the event of a temperature change (analog permanent measurement instead of digital sampling rate). This results in a low-noise and interference-resistant output signal. High precision is ensured by range-specific amplification even in small measuring ranges. The transmitter is set directly on the device using DIP switches or with the PC setup program. Accessories Input: Pt100,Pt wire, Potentiometer Analog Output: 0-20mA or 4-20mA or 0-10V Supply: AC, AC/DC PC interface with converter USB/TTL, JUMO/ Page 38

39 Series TWT- Screw-in pocket for systems where drain- or pressure- less installations/ exchanging of thermocouples or resistance thermometers are required. M2-60 pockets in different materials: steel , stainless steel , steel operating pressure : up to 450 bar Immersion Length: 100mm Outside diameter: 8mm,10mm,12mm,15mm Process Connection: R ½ BSP, ¾ BSP or NPT Temperature range: up to 800 C Other technical characteristics (length, diameter, connector etc.) available upon request Series TWT- Screw-in pocket for systems where drain or pressure less installations / exchanging of thermocouples or resistance thermometers. M2-61 Type: Welded Pocket Sheath materials: AISI 316L or 304 Tip thickness: 4mm Immersion Length: 100mm, 250mm, 300mm, 600mm Outside diameter: 15mm Process Connection: R 3/4 BSP male M24x1.5 male Temperature range: up to 800 C Other technical characteristics (length, diameter, process connection etc.) available upon request Page 39

40 Isolated Barriers for Temperatures Probes Intrinsic safety barriers Page 40

41 Isolated Barriers for Temperatures Probes Intrinsic safety barriers Page 41

42 Miniature Connector with thermocouple material contacts M2-62 Thermowells are used for installing thermocouples resistance thermometers,whenever replacement without draining the system and/or pressure resistance are required Body material: Tough, self-extinguishing thermoplastic compound with low moisture absorption rate and good dielectric strength Maximum cable diameter: min. 0,12mm, max. 0,8mm Wire terminals: screw type for quick wiring, 5mm Maximum temperature rating: 200 C Standard Connector with thermocouple material contacts M2-63 Thermowells are used for installing thermocouples resistance thermometers,whenever replacement without draining the system and/or pressure resistance are required Body material: Tough, self-extinguishing thermoplastic compound with low moisture absorption rate and good dielectric strength Maximum cable diameter: 1.6mm Wire terminals: 6.4mm Maximum temperature rating: 200 C Standard panel with Thermocouple material contacts M2-64 Thermowells are used for installing thermocouples resistance thermometers, whenever replacement without draining the system and/or pressure resistance are required Page 42 Front panel: anodized aluminum 2,4mm thick Panel dimensions: 38x38mm Panel cut out: square or round 30mm Depth behind panel: 20mm Maximum temperature rating: 200 C Maximum conductor dimension: 1.6mm

43 Series MAGN: Level Switches-Magnetic Float with reed relays M2-65 Material of wetted parts: Stainless steel 316 Ti Medium density: min. 0.8g/cm3 Max. process pressure : 2.5 MPa (25bar) at 20oC Process connection: 1 BSP, 2 BSP or 1-½ BSP Medium temperature range -40 oc oc Nominal float dimension: Φ27.8x30mm or 42x50mm Output: 1-5 pcs reed switches, connecting on side of each NO/NC Switching rate: 120w/VA, 250V AC/DC, 3A/ reed relay Distance of switches: min 110mm Mechanical Protection: IP68 Connection head: Type BUZ IP 65 Other technical characteristics (length, diameter, process connection etc.) available upon request Series MAGN: Level Switches-Magnetic float UTECO Magnetic float level, suitable for level indication of normal and explosive liquids and can be used for level control tasks Material: stainless steel Immersion length: 80mm Medium density: min. 0.7kg/dm3 M2-66 Max. process pressure : Max. 25bar Process connection: 1 BSP, 2 BSP or 1-½ BSP Medium temperature range -40 o C o C Ambient temperature: -20 o C o C Nominal float dimension: Φ27.8x30mm or 42x50mm Output: 1 reed switch, NO/NC Switching rate: 120W/VA, 250V AC/DC, max. 3A Switching point: 40mm+-3mm from the cottom of the protecting tube Float shape : cylindrical Electrical connection cable length 3m, 3x0,5mm with insulation polypropylene Process Connection: BSP : ¼ or 3/8 Distance of switches: min 110mm Mechanical Protection: IP68 Other technical characteristics (length, diameter, process connection etc.) available upon request Page 43

44 Series Conductive - Level sensors for conductive limit value detection M2-67 Material: st. st Diameter rod: 4mm Process connection: R ½ or 1½ BSP Insulation rod electrode: PFA or PVC Temperature range: from 0 C to 200 C Length rod electrode: 350mm, 500, 1000mm Number of electrode: 1,2,3,4 or 5 electrode Terminal box: Plastic,IP65 Other technical characteristics (length, number of electrodes, connections etc.) available upon request Electronic units amplifiers available upon request Series Conductive - Level sensors for conductive limit value detection M2-68 Material: stainless steel Diameter rod: 4 mm Process connection: R ¼ BSP Insulation rod electrode: PFA Temperature range: from 0 C to 260 C Electronic units amplifiers available upon request Page 44

45 ACCESSORIES Connection Head Connection head type XDA ATEX 94/9/EC, EN 50018, EN Material of body and cover :aluminum diecasting Service temperature : Cable gland: Process thread: Protection degree : Certificate no. Ordering Nr C silicon rubber ¾ NPT ½ NPT IP65 EEXD IIC T6 IP65 U Connection head type KNE Material of body and cover :aluminum diecasting Cable gland washer-zinc- -Plated press steel Cover chain-chrome-plated steel Service temperature : Cable gland: Process thread: Protection degree : Ordering Nr C silicon rubber M20x1,5 ½ NPT IP65 U Connection head to DIN EN FORM B Material of body and cover :aluminum diecasting Service temperature : Cable gland: Process thread: Protection degree : C M20X1.5 B15 or M24X1,5mm IP65 Ordering Nr. B15 U M24X1,5mm U Page 45

46 Connection head type XD-SD Material of body and cover : Stainless steel DIN AISI 316 Service temperature : Cable gland: Process thread: Protection degree : T= C Silicon rubber Maximum space for transmitter (without spring loading Ø 58x35mm) M20X1.5 (double) 1/2NPT IP68 Flame proof zone1, zone 21 Zone 2, zone 22 Ordering Nr. U Connection head form BUZH Material of body and cover :aluminum diecasting Service temperature : Cable gland: Process thread: Protection degree : Ordering Nr C M20X1.5 M24X1,5mm IP65 U Connection head to DIN EN Form A Material of body and cover : Aluminum die-casting Service temperature : Cable gland: Process entry: Protection degree : Ordering Nr C M20X1.5mm D 22,8mm or 32,5mm IP64 A22 U A32 U Page 46

47 Connection head TYP BBK to DIN EN Form B Material of body and cover : PPO Plastic Service temperature : -30 C to 130 C Cable gland: M20X1.5mm Process thread: M24x1,5 Protection degree : IP65 Ordering Nr. U Connection head form J (miniature head) Material of body and cover :aluminumcasting Service temperature : Cable gland: Process thread: Protection degree : Ordering Nr. -40 to +100 C M16X1.5mm M12X1mm IP65 U Page 47

48 ACCESSORIES-Cable Gland Screwed cable gland Euro top brass With the new Euro-Top Connect, which is equipped with a special sealing insert, it is possible to secure cables with pre-assembled connectors particularly easy and quickly Material: Nickel plated brass Sealing : Neoprene Clamping insert : Polyamide o-ring Perbunan (NBR) Temperature : -40 C to +100 C Thread metric acc to EN Protection class : IP68 Notes integrated strain relief acc to EN Size: M20x1,5 Clamping range : 6.0 to 12 mm Wrench size 22/22 Ordering Nr. U Cable gland for armored cables Suitable for use in areas less than 2000 cm3 with gas group IIC according to EN 50014/50018 The cable gland is suitable for direct insertion into the apparatus installation. For use in gas and dust potentially hazardous areas zone 1 and 2 groups IIA,IIB and IIC Exd and Exe 2G and D Temperature : 40 C to +110 C=LCIE 97 ATEX 6008 X102 Entry thread NPT ½ Clamping flange 3.0 to 12,0 mm Page 48 Material St. St. ( 316L) Sealing : Neoprene Certificates: IMQ08 ATEX 021X Marking Ex II 2GD Exd II CGb/Exell CGb/ Extb III CDb Approvals ATEX Protection class IP66/68 : Wrench size 22/22 Other entry thread : Ordering Nr. NPT 3/8, NPT ¾ NPT 1, NPT 1 ¼ NPT 1-1/2, NPT 2 NPT 2-1/2, NPT 3 NPT 4 U

49 Screwed cable gland Euro top Polyamide With the new Euro-Top Connect, which is equipped with a special sealing insert, it is possible to secure cables with pre-assembled connectors particularly easy and quickly Material: Polyamide 6 Sealing : Neoprene Thread metric acc to EN Temperature : -30 C to +80 C intermittent to +150 C Entry thread NPT ½ Clamping range 6.0 to 12 mm Protection class : IP68 Notes integrated strain relief acc to EN Size: M20x1,5mm Wrench size 24/24 Ordering Nr D0G1 Cable gland for armored cables Operating conditions: dangerous area group II zone , Indoor high humidity, dusts and oil and /or outdoor rain exposed Thread standard: Ambient Temperature: Protection mode: Size: Cable Dimensions: GK UNI 6125 pr NPT or ISO Metric Material standard zinc- plated steel -40 C to +110 C 112GDExd IIC, Exe, Exi.ExtDA21 IP66/67 1/2 NPT or ¾ NPT Ø Max 9 to 17mm Ordering Nr Temperature measuring transmitter for MSD4 Power connector 4-20 ma or 0-10V UTECO transmitter transforms the temperature sensitive resistance of a RTD into a 4 to 20 ma. The housing of the transmitter is a female power connector DIN EN (DIN 43650) Thus the refitting of a transmitter for a temperature sensor with a power connector is possible by simple replacement of the female part of the connector Sensor Connector: RTD acc. to EN (e.g. PT100) Sensor connection 2-wire circuit Measuring current 0,8 ma Output signal 4-20 ma 2 wire current loop Also Available 0-10V Loop voltage: V DC Sensor fracture >24mA Sensor short circuit <2.6mA Type of clamps : Screw clamps Weight : approx.30g Power connector: DIN EN (DIN 43650) Binder MSD4, Hirschmann GDM Service temperature : C Cable gland: M20X1.5mm Process entry: D 22,8mm or 32,5mm Protection degree : IP64 Ordering Nr. 4-20mA C U Page 49

50 Standard Cylindrical Connectors Standard Connector Female 3 pole Ø contacts Ø 2mm Specification: 6,9,12 and 19 Contacts of Ø to 52 contacts, of Ø 2-3 and 4mm Contacts to be soldered Cord section max. 1,34-3,18-5,26mm2 Standard series Water proof standard series High voltage series Usage temperature: -40 C to +100 C Protection degree : IP 50,54 with joint under base Ordering Nr. U Standard Cylindrical Connectors Standard connector male 4 pole Ø contacts Ø 2mm Specification: 6,9,12 and 19 Contacts of Ø to 52 contacts, of Ø 2-3 and 4mm Contacts to be soldered Cord section max. 1,34-3,18-5,26mm2 Standard series Water proof standard series High voltage series Usage temperature: -40 C to +100 C Protection degree : IP 50,54 with joint under base Ordering Nr. U Standard Cylindrical Connectors Standard panel connector male 4 pole Ø contacts Ø 2mm Specification: 6,9,12 and 19 Contacts of Ø to 52 contacts, of Ø 2-3 and 4mm Contacts to be soldered Cord section max. 1,34-3,18-5,26mm2 Standard series Water proof standard series High voltage series Usage temperature: -40 C to +100 C Protection degree : IP 50,54 with joint under base Ordering Nr. U Page 50

51 Compensating & extension cables Code: Type: AN 11 LR 2Χ1,5 mm2 For thermocouple : Type Κ NiCr-Ni Color code: Acc to IEC 584 Insulation: Silicone Fiberglass-Braid Resistance to temperature: up to 180 C External diameter: 6,2 mm Code: Type: AN 11-4LR 4x1,50 For thermocouple: Type Κ NiCr-Ni Color code: Acc to IEC 584 Insulation: Silicone Silicone - Braid Resistance to temperature: up to 180 C External diameter: 9,3 mm Code: Type: 2X1,3 mm2 PVC-PVC (flat) For thermocouple: Type Κ NiCr-Ni Color code: Acc to DIN Insulation : PVC - PVC Resistance to temperature : up to 70 C External diameter : 6,7 mm Code: Type: 2X0,22 mm PVC-PVC (Round) For thermocouple: Type Κ NiCr-Ni Color code: Acc to IEC 584 Insulation: PVC - PVC Resistance to temperature: up to 70 C External diameter: 4,0 mm Code: Type: JX 2X0,5 Fiber-Fiber-Braid For thermocouple: Type J Fe-CuNi Color code: Acc to IEC 584 Insulation: Fiber Fiber - Braid Resistance to temperature: up to 400 C External diameter: 4,0 mm Code: Type: G/G-24-KK (G3 NICR-NI) 2x0,5 For thermocouple: Type Κ NiCr-Ni Color code: Acc to ANSI MC 96.1 Insulation: Fiber - Fiber Resistance to temperature: up to 400 C External diameter: 2,0 mm Code: Type: RT-Y(St)YSWAY-fl 1x2x1,29 mm NiCr-Ni For thermocouple: Type K NiCr-Ni Color code: Acc to ANSI MC 96.1 Insulation: PVC Aluminum foil -Steel Wire Armor-PVC Resistance to temperature : up to 70 C External diameter: 13,1mm Code: Type: SX PVC-SCH-PVC 16x2x0,50 mm 2 For thermocouple: Type S PtRh10-Pt Color code: Acc to DIN Insulation: PVC Aluminum foil - PVC Resistance to temperature : up to 70 C External diameter : 19,2 mm Page 51

52 Code: Type: SIHF-GLS(GLP) 3X1,5 mm2 Insulation: Silicone-Silicone-Fiberglassς-Braid Resistance to temperature: up to 180ºC External diameter: 8,9 mm Form: Round High Temperature Cables Code: Type: PFA-SS-PFA 3X1,5 mm2 Insulation: Teflon-Braid-Teflon Resistance to temperature: up to 260ºC External diameter: 6,0 mm Form: Round Code: Type: Teflon- Fiber-Braid 3XAWG16 Insulation: Teflon- Fiberglass-Braid Resistance to temperature: up to 260ºC External diameter: 5,0 mm Form: Round Code: Type: VIBRA RV 1.00 STV02 2X1,0 mm Insulation: Vibraflame Braid- Vibraflame Resistance to temperature: -196ºC +1565ºC External diameter: 7,0 mm Form: Round Code: Type: PT100 3X0,5 FIBER-FIBER-BRAID Insulation: Fiber Fiber - Braid Resistance to temperature: up to 400ºC External diameter: 3,0 mm Form: Round Code: Type: Hyflon-Silicon 4X0,22 mm2 Insulation: Hyflon - Silicone Resistance to temperature: up to 180ºC External diameter: 4,3 mm Form: Round Code: Type: X0,14mm2 Insulation: Teflon Braid - Teflon Resistance to temperature : up to 260ºC External diameter: 3,5 mm Form: Round Page 52

53 Marine Approved Cables Cable Category Cable Type Product Code Multicored cables Type:RTFRO 300/500V Teflon-Braid-Teflon RTFRO 3 x 0, Developed for demanding installations in tough areas such as engine rooms and control rooms, RTFRO diesel engine cable are able to offer mechanical strength which enables installation without added protection along with a wide temperature range of -65oC to +150oC that can guarantee a long lifetime, even when placed close to the heat source. RTFRO diesel engine cables are oil and chemical resistant and flame retardant to IEC adding major safety benefits. Insulation: ETFE Sheath color: Black Core identification: Tin Plate Copper (TPC) Number of cores: 3 cores Filling Screen: Tin plated copper drain wire beneath braid of tin plated copper wire (85% min coverage) Rated Voltage: 300 / 500V Test Voltage: 1 minute at 5 kv DC Flame retardance test: Low smoke generation: IEC RoHS Resistance to temperature: -65oC to +150oC Rated Voltage: 300 / 500V Test Voltage: 1 minute at 5 kv DC Flame retardance test: Low smoke generation: IEC RoHS Description no. / size mm2 approval body cabled shield (s) sheath (s) max 0 Weight g/m amps at 40oC Max RTFRO 2 x 0,75 2x 0,75 ABS DNV GL NKK 3,9 4,8 x 5,8 5,6 x 6, ,8 RTFRO 2 x 1,5 2x 1,50 ABS DNV GL NKK 5,4 6,3 x 7,3 7,3 x 8, ,2 RTFRO 3 x 0,5 3x 0,50 ABS DNV GL NKK 3,9 4,6 x 5,6 5,4 x 6,4 70 9,1 RTFRO 3 x 0,75 3x 0,75 ABS DNV GL NKK 4,2 5,1 x 6,1 5,9 x 6, ,9 RTFRO 3 x 1,5 3x 1,50 ABS DNV GL NKK 5,7 6,6 x 7,6 7,6 x 8, ,7 RTFRO 4 x 0,5 4x 0,50 ABS DNV GL NKK 4 4,8 x 5,8 5,6 x 6,6 72 8,2 RTFRO 4 x 0,75 4x 0,75 ABS DNV GL NKK 4,7 5,6 x 6,6 6,4 x 7, ,8 RTFRO 4 x 1,5 4x 1,50 ABS DNV GL NKK 6,3 7,2 x 8,0 8,2 x 9, RTFRO 5 x 0,75 5x 0,75 ABS DNV GL NKK 5,1 6,1 x 7,1 7,1 x 8, ,1 RTFRO 5 x 1,5 5x 1,50 ABS DNV GL NKK 7,1 8,0 x 9,0 9,1 x 10, ,9 RTFRO 7 x 0,75 7x 0,75 ABS DNV GL NKK 5,7 6,7 x 7,7 7,7 x 8, ,7 RTFRO 7 x 1,5 7x 1,50 ABS DNV GL NKK 7,8 8,7 x 9,7 9,8 x 10, ,8 RTFRO 8 x 0,75 8x 0,75 ABS DNV GL NKK 6,3 7,2 x 8,2 8,2 x 9, ,3 RTFRO 9 x 0,5 9x 0,50 ABS DNV - NKK 6,5 7,5 x 8,4 8,5 x 9, ,1 RTFRO 10 x 1,5 10x 1,50 ABS DNV - NKK 10,1 11,2 x 12,2 12,4 x 13, ,5 RTFRO 12 x 0,75 12x 0,75 ABS DNV GL NKK 7,7 8,6 x 9,6 9,7 x 10, ,4 RTFRO 20 x 0,75 20x 0,75 - DNV GL - 9,6 10,6 x 11,6 12,0 x 13, ,4 RTFRO 25 x 0,75 25x 0,75 ABS DNV GL NKK 10,8 11,8 x 12,4 13,2 x 13, ,7 Page 53

54 Marine Approved Cables Cable Category Cable Type Product Code Armoured Power & Control Cable 0.6/1kV Flame Retardant-Halogen Free-Low Smoke emission xx-xx-x Minimum recommended installation temperature -15 o C Lowest Operation Temperature -40 o C Identification: Lot number, cable type, cable size, voltage, temperature, standards, production month, manufacturer s name and meter marking on the sheath Conductor: Stranded copper conductor Insulation: XLPE plastic Bedding: Filler tape Armour: copper wire braid, coverage >90% Sheath: Polyolefine plastic, SHF1 Standard colour black,other colours on request Rated Voltage: AC 0.6/1kV (1.2kV) DC0.9/1.5kV (if voltage to earth does not exceed 0.9kV) Maximum conductor temp.:+90 o C Flame-retardant: IEC IEC Halogen-free: IEC series Smoke emission: IEC series Number of conductors & cross-section n x mm2 Cross- section of armour mm2 Nominal outer diameter mm Approximate weight Kg/Km Current Rating A at +45oC Min. bending radius fixed installation mm Page 54 1x x x x x x x x x x12C x x x x x x x x x x x x x x x x x

55 3x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x C x x x C x x x x x x x x Page 55

56 Code: Type: LIYCY Insulation: PVC Braid - PVC Resistance to temperature: up to 70 C External diameter: 7,9 mm Data Control & High Voltage Cables Code: Type: NYMH11YO-J (YPUR) 3X1,5 mm2 Insulation : Polyurethane - Polyurethane Resistance to temperature: up to 70 C External diameter: 7,9 mm Very good chemical resistance Code: Type: S 200 3x0,75 Insulation: TPE-E - PUR Resistance to temperature: up to 70 C External diameter: 7,9 mm Very good chemical resistance Highly flexible for continues bending motions Code: Type: ZKBi 1,0 mm2 Y.T. 20 KV Insulation: Silicone Fiber glass- Silicone Resistance to temperature: up to 180 C External diameter: 8,0 mm 20 KV High Voltage cable Page 56

57 Code: Type: RE-2Y(St)Y-fl 300 V 2x2x1,0 mm 2 Black Insulation: PVC/OS/PVC Resistance to temperature: up to 70ºC External diameter: 8,2 mm Instrumentation & Bus Cables Code: Type: RE-Y(St)YSWAY-fl 300V 2X2X1,0 mm2 Grey Insulation: PVC/OS/PVC/SWA/PVC Resistance to temperature: up to 70ºC External diameter: 15,00 mm Code: Type: RE-Yw(St)YwSWAYw-fl 300V 1X2X1,5 mm2 Insulation: PVC/OS/PVC/SWA/PVC Resistance to temperature: up to 105ºC External diameter: 12,4 mm Code: Type: RE-2Y(ST)Y-PIMF 2x2x0,5 mm 2 Blue Insulation: PVC/OS/IS/PVC Resistance to temperature: up to 70ºC External diameter: 11,2 mm Code: Type: RE-2G(St)HSWAY-fl CI 500V 5x2x0,75 mm 2 Insulation: Silicon Rubber/OS/LSZH/SWA/PVC Resistance to temperature: up to 90ºC External diameter: 18,1 mm Standard: IEC Fire Resisting (CI) Code: Type: PROFIBUS FMS/DP 1x2xAWG 22/1 Conductor: solid conductors Resistance to temperature: up to 70ºC External diameter: 7,9 mm Code: Type: Profibus L2 7-wire 1x2x0,64 Conductor: 7 strand Resistance to temperature: up to 70ºC External diameter: 7,3 mm Code: Type: CC-LINK BU 3x0,5 (AWG20/7) Conductor: 7 strand Resistance to temperature: up to 70ºC External diameter: 7,9 mm Page 57

58 International Color Code for Compensating & Extension Cables Page 58

59 Zener Barriers PLC Inverter Level Switch Calibrator Ex Indicators Positioners Proximity Switches-Sensors Page 59

60 REPRESENTED FIRMS Frequency Inverter for AC Motors, PLC-Servo-HMI SCADA Low-Voltage Switchgears /Contactors- Breakers CNC Robots Controllers, Power Units, System/Recording Technology Analytical measurement Pressure instruments Thermostats and Dial thermometers Transducers for temperature & Humidity PA Intrinsic Safety Isolators Zener Barriers Signal Conditioners Fieldbus Infrastructure Remote I/O Systems HART Interface Solutions Level Measurement HMI + Visualization Custom Cabinets + Junction Boxes Corrosion Monitoring Separator Alarm Systems Sensors for Hazardous Areas Page 60 Pressure & differential transmitters Liquid level transmitters Density transmitters Liquid interface transmitters Flow transmitters (Coriolis, electromagnetic, Vortex, mass) Temperature & humidity transmitters Analytical instrumentation (PH, Redox, Dissolved Oxygen ) Recorders, Indicators, positioners, Controllers, Accessories.

61 Display instrumentation for use in safe and hazardous areas Obsolete products Loop powered indicators Temperature Fieldbus displays transmitters Fieldbus indicators Setpoint stations Serial text displays Digital panel meters Batch controllers Sounders & Totalisers Counter timer tacho clock beacons Battery powered clock Pneumatic controllers & Transmitters Temperature & Pressure Recorders Positioners I/P converters Control Valves Air Filter Regulator Transmitters Pressure switches Temperature switches Pressure gauges Thermometers Moderator Measuring instruments Analogue panel meters Electrical transducers Safety testing devices Multi-function indicating instruments Analogue display with stepper motor Page 61

62 LEVEL SWITCHES LEVEL TRANSMITTERS Float NON-Contact Microwawe/ Conductivity RADAR Magnetic Coupling Microwave Level Transmitter Magnetic Tracking Ultrasonic Level Transmitter Vibration Magnetostrictive Rotary Paddle Hydrostatic & pressure Stationary & portable Ultrasonic flow meters Mixers, agitators Level Transmitters Telemetry Process calibrators Test & Measurement / Portables Page 62

63 Company Name: Ordering Form Please print this form out and send it to Contact Name: Company Address: City: Area: Country: Company Phone: Company Fax: Quantity Ordering Nr. Type Other Characteristics Signature Corporate seal Page 63

64 Page 64