Pressure Transmitter JUMO dtrans p30 Type

Transcription

1 Data Sheet Page 1/6 Pressure Transmitter JUMO dtrans p0 Type General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter is a piezo-resistive element or a thin-film strain gauge. The pressure is converted into an electrical signal. Technical data Reference conditions as per DIN and IEC 770/5. Ranges see order details Overload limit 0 bar x full scale 0 40 to 0 0 bar 2 x full scale to bar 1.5 full scale Bursting pressure 0 40bar 4 x full scale 0 60 to bar 8 x full scale to bar 5 x full scale bar x full scale Parts in contact with medium normally: st. steel, Mat. Ref / for range 60 bar: Mat. Ref / Output 0 20mA -wire burden (U B -12 V) / 0.02A 4 20mA 2-wire burden (U B -10 V) / 0.02A 4 20mA -wire burden (U B -12 V) / 0.02A V burden 50 k 1 6V burden 10 k 0 10 V burden 10 k Burden error 0.5% max. Zero offset 0.% of full scale Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for 0 0 mbar mbar mbar Ambient temperature error within range 0 to +100 C (compensated temperature range) for 0 and 400 mbar zero: 0.0%/ C typical, 0.05%/ C max. span: 0.02%/ C typical, 0.04%/ C max. for above 600 mbar zero: 0.02%/ C typical, 0.04%/ C max. span: 0.02%/ C typical, 0.04%/ C max. with basic type extension 024: zero: 0.01%/ C Deviation from characteristic 0.5% of full scale (limit point adjustment) with basic type extension 02: 0.2% of full scale (limit point setting) Hysteresis 0.1% of full scale Repeatability 0.05% of full scale Response time with current output (output 402, 405 or 406): msec max. with voltage output (output 412, 415, 418 or 420): 10 msec max. Stability per year 0.5% of full scale Supply 10 0VDC Type with terminal box (output 4 20mA and 1 6V) 5 V DC (output V) VDC (output 0 10V) V DC (output 0(4) 20 ma) Ripple: the voltage spikes must not go above or below the values specified for the supply max. current drawn: approx. ma Supply voltage error 0.02% per V (nominal supply voltage 24 V DC) in proportion for supply 5 V DC ( 0.5 V) Permissible ambient temperature -20 to +100 C Storage temperature -40 to +1 C Permissible temperature of medium -0 to +120 C Electromagnetic compatibility EN interference emission: Class B noise immunity: industrial requirements Mechanical shock (to IEC ) 100 g/1 msec Mechanical vibration (to IEC ) 20 g max. at Hz Protection with terminal box IP65 to EN (connecting cable diameter 5 mm min., 7 mm max.)

2 JUMO GmbH & Co. KG 605 Fulda, Germany Data Sheet Page 2/6 with connecting cable IP67 to EN with circular connector M12 x 1 P67 to EN Housing stainless steel, Mat. Ref polycarbonate GF Pressure connection see order details; other connections on request see order details terminal box to DIN 4 650, Form A, conductor cross-section up to 1.5 mm 2 ; or attached 4-core PVC cable, length 2 m other lengths on request Nominal position unrestricted Weight 200 g Connection Supply 10 0 V DC V DC 5VDC Output 1 6V 0 10V V Caution Earth instrument! (pressure connection and / or or screen Terminals Plug Cable M12 x 1 1 L+ white 1+ 2 L Output 4 20 ma, 2-wire Output 0(4) 20 ma, -wire Protective earth yellow white proportional current 4 to 20 ma in supply yellow Screen black Pin assignment M12 x Dimensions with terminal box (61) with attached cable (12) with circular connector M12 x 1 (6) M12 x a/f ø ø0 ø27

3 JUMO GmbH & Co. KG 605 Fulda, Germany Data Sheet Page /6

4 JUMO GmbH & Co. KG 605 Fulda, Germany Data Sheet Page 4/6 Connections (not front-flush) 502 Standard connection seal DN 1/2" pipe Front-flush connections DN G /4" pipe DN G 1/2" pipe DN G /4" pipe DN G 1" pipe 41 a/f O ring 14x1.78 O ring 20.5x1.78 O ring 26.7x1.78 D 2 L 2 L G /4 ø ø 18 G 1/2" pipe ø 24 G /4" pipe ø /2" pipe 58 ø 0 G 1" pipe Cone nipple with slotted union nut to DIN Clamp connection to DIN Suitable for the JUMO PEKA adapter system, see data sheet ø5 ø9.5 1/4" pipe ø6 ø17.5 1/4-18 NPT 1/2-14 NPT G 1/2 ø4.5 ø9.5 7/16-20 UNF 11 D 1 D D 1 D 2 RD52 x 1/ D 4 DN ød 1 ød 2 ød ød 4 L 1 L x1/ RD RD 52x1/ RD 58x1/ RD 65x1/ RD 78x1/ DN DN Nominal ød 1 ød 2 DIN 2676 (Zoll) Size ISO ,

5 JUMO GmbH & Co. KG 605 Fulda, Germany Data Sheet Page 5/6 Order details (1) Basic type Pressure transmitter JUMO dtrans p0 (2) Basic type extension /000 none /02 reduced deviation from characteristic 1 /024 reduced ambient temperature error 2 /999 special version () Input gauge pressure to 0. bar to 0.4 bar 45 0 to 0.6 bar to 1.0 bar to 1.6 bar to 2.5 bar to 4 bar to 6 bar to 10 bar to 16 bar to bar to 40 bar 46 0 to 60 bar to 100 bar to 160 bar to 0 bar to 400 bar to 600 bar to 0 bar to 0.6 bar to 1.5 bar to bar to 5 bar 48-1 to 9 bar to 15 bar to 24 bar 999 special range gauge pressure () Input absolute pressure to 0.6 bar to 1.0 bar to 1.6 bar to 2.5 bar to 4 bar to 6 bar 49 0 to 10 bar to 16 bar to bar 998 special range 999 special range absolute pressure (4) Output to 20 ma -wire to 20 ma 2-wire to 20 ma -wire to 4.5 V -wire to 10 V -wire to 5 V -wire to 6 V -wire

6 JUMO GmbH & Co. KG 605 Fulda, Germany Data Sheet Page 6/6 (5) Process connection (not front-flush) 502 1/4" pipe to EN /2" pipe to EN 87 (standard connection) 511 1/4"-18 NPT to DIN /2"-14 NPT to DIN /2" pipe to DIN 852 T /16"-20 UNF 998 suitable for connecting to pressure separator (5) Process connection (front-flush) /2" pipe /4" pipe /2" pipe with front seal 575 /4" pipe with front seal " pipe with front seal 4 60 taper pressure connection with slotted nut to DIN11 851, DN taper pressure connection with slotted nut to DIN , DN taper pressure connection with slotted nut to DIN , DN taper pressure connection with slotted nut to DIN , DN taper pressure connection with slotted nut to DIN , DN clamp pressure connection to DIN 2 676, DN clamp pressure connection to DIN 2 676, DN 4, DN2 4 and DN clamp pressure connection to DIN 2 676, DN tank connection with slotted union nut JUMO PEKA 6 (6) Material of process connection 20 stainless steel (7) 12 with attached cable (cable length in plain text) 6 with circular connector M12 x 1 61 with terminal box (8) Extra code 000 none 591 throttle in pressure duct 5 60 enlarged pressure duct / / Order code 1 only for 4 to 20 ma 2-wire output only for between 0.6 and 40 bar not with process connection only for spans between 4 and bar only for output 0 to10 V or 4 to 20 ma 2-wire or 0(4) to 20 ma -wire not with process connection 574 only for from 1 to 400 bar 4 only for up to bar 5 only with process connections that are not front-flush 6 suitable process connection adapter, see data sheet