97-03 Volkswagen 1.9L TDI Injector Nozzles
|
|
- Verity O’Neal’
- 6 years ago
- Views:
Transcription
1 97-03 Volkswagen 1.9L TDI Injector Nozzles Product Description Part Number.205 Injector Nozzels # Injector Nozzels #44201
2 VW INJECTOR NOZZLES Introduction These instructions outline how to install the Bully Dog Volkswagen Injector Nozzles. It is very important that these injectors are installed by an experienced mechanic. If the install is not done correctly, damage to the injectors and possibly engine components can occur. These injectors should only be installed on volkswagen 1.9L TDI diesels and should not be used for any other application. Bully Dog offers two different sizes of nozzles, the first is a 205 which is rated to add 20 horsepower over stock, and our 216 race only injector nozzles rate at 30 horsepower. The size 216 injector nozzles are not recommended for every day driving. The 216 will cause excess smoke that needs to be accounted for with additional racing parts. Installation for the 205 and 216 flow injectors is exactly the same so no additional precautions need to be taken for the installation of either injector. BILL OF MATERIALS 4 Injector Nozzles TOOLS NEEDED 17mm wrench 15 mm wrench 13 mm wrench Torque wrench Vice Flat head screw driver
3 1. Remove the engine cover to reveal the engine. 2. Remove the fuel lines using a flat head screw driver and a 17mm wrench. When removing the fuel lines place a paper towel under the line openings to soak up any fuel leakage. 3. Injector #3 has an electronic connector that attaches to the top of the injector by a small black wire. Follow that small black wire down from injector #3 to locate the connector. Remove the black connector from its cradle, remove the small metal lock and pull apart the two pieces so that the injector can then be removed. 4. Notice the black insulated wire that runs below the injectors and connects to each one of the glow plugs. Pull upward on each of the glow plugs to remove this wire from each one of the glow plugs and gain access to the injector holders. Hint: Start at injector #1 on the left side. Removing Stock injectors VW INJECTOR NOZZLES Injector Order Note that the instructions will refer to the injectors from left right as if facing the engine. see the diagram to the right which clearly displays how this instruction set refers to each injector. 2
4 VW INJECTOR NOZZLES 5. Pull the fuel injector return lines off one side of each injector to separate the injectors from each other, which will make it possible to remove each injector individually. 6. Use a 13mm socket to remove each injector holder bolt. Remove the injector holder along with each bolt. 7. Remove the injectors by simply pulling upward on the injector while giving it a little wiggle. Use a wrench, with descresion, if there is difficulty removing the injector by hand. As each injector is removed note that there is a washer on the end of the injector that must be saved, this washer will be reused. Be sure to cover up the injector holes in the head with paper towels. This system is direct injection so anything that falls into those holes goes straight into the cylinder. 8. Once each injector has been removed the nozzles can be swapped. 3
5 VW INJECTOR NOZZLES Changing the injector Nozzles You must have some sort of vice to complete this step. Only change one injector nozzle at a time. 1. Put the injector into a vice, nozzle side up. Only tighten the vice enough to hold the injector in place, do not pinch or dent the injector body. 2. Using a 15mm wrench remove the injector nozzle cover and the stock injector nozzle. 3.Clean the injector nozzle cover and injector washers with diesel fuel to remove diesel soot before reusing. 4. Place the Bully Dog injector nozzle onto the top of the injector body. Line up the two nozzle holes on the bottom of the nozzle to the two rods sticking up from the injector body and line up the open hole on the bottom of the nozzle to the largest hole on top of the injector body. 5. Place the nozzle cover over the top of the nozzle and torque it down to about 25lbs. of torque. 6. Place the stock injector nozzles back into the plastic nozzle cases for safe keeping. 7. Continue this process on each injector until all four injector nozzles have been swapped. 4
6 VW INJECTOR NOZZLES Injector flow test The injectors should be flow tested at a certified Bosch dealer. This should be done to verify that the injectors are all flowing at the same rate and to also verify that the injector nozzles are meeting their specified flow rate. The nozzles rated at 205 should flow close to.205 liters/minute and the 216 should flow close to.216 liters/ minute. The injectors can be installed without flow testing, but they may not work to their full potential and efficiency. Installing the Injectors 1. Before putting any of the injectors back in place put a small spot of oil or grease on each washer so they will stick to the injector and not fall off during placement of the injectors. 2. Place each injector back in its original location. Make sure each injector is placed firmly. 3. Reconnect the fuel injector return lines. 4. Put the injector holders in place and hand tighten each injector holder bolt. Once all are in place torque the holder bolts to 20lbs. This step is important if the injectors are not placed and tightened correctly the engine may leak exhaust gas past the sides of the injectors. 5. Install the rest of the components that were removed during the removal of the injectors. 6. Bleeding the fuel lines: Before attempting to start the vehicle, the fuel lines need to be bled to get all of the air out of the fuel lines. Bleeding the lines takes two people, one to watch the fuel lines and one to turn over the engine. a. Bleed one line at a time: Start with line one, disconnect line one from the top of the injector and turn the vehicle engine over. Continue turning the engine until fuel comes out of the line. After fuel comes out of the line, that line can be connected to the top of the injector. Continue to bleed each line on every injector line until all are bled, and then start the engine. b. Once the engine has been started let it run and observe the injector ports, be sure that the engine sounds normal and that there is no exhaust gas moving upward past the injectors. 5
7 warranty & disclaimer VW INJECTOR NOZZLES REMEMBER, THIS IS A PERFORMANCE PRODUCT, USE AT YOUR OWN RISK. This product is not intended to be used to break the law. Do not use this product until you have carefully read the following agreement. This agreement sets forth the terms and conditions for the use of this product. The installation of this product indicates that the buyer has read and understands this agreement and accepts the terms and conditions. Never exceed recommended vehicle or tire top speed ratings. DISCLAIMER OF LIABILITY Bully Dog Technologies, LLC. Its distributors, jobbers, and dealers (hereafter Seller) shall be in no way responsible for the product s proper use and service. THE BUYER HERBY WAIVES ALL LIABILITY CLAIMS. The Buyer acknowledges that he is not relying on the Sellers skill or judgment to select or furnish goods suitable for any particular purpose and that there are no liabilities which extend beyond the description on the face hereof, and the Buyers hereby waivers all remedies or liabilities expressed or implied, arising by law or otherwise, (including without any obligation of the Seller with respect fitness, merchantability and consequential damages) or whether or not occasioned by the Seller s negligence. The Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages. The Buyer acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the Buyer agrees to indemnify the Seller and to hold the Seller harmless from any claim related to the item of the equipment purchased. Under no circumstances will the Seller be liable for any damages or expenses by reason of use or sale of any such equipment. The Seller assumes no liability regarding the improper installation or misapplication of its products. It is the installer s responsibility to check for proper installation and if in doubt contact the manufacturer. The Buyer is solely responsible for all warranty issues from the manufacturer. LIMITATION OF WARRANTY BULLY DOG TECHNOLOGIES, LLC. (Hereafter Seller ) gives Limited Warranty as to description, quality, merchantability, and fitness for any particular purpose, productiveness, or any other matter of Seller s product sold herewith. The Seller shall be in no way responsible for the products proper use and service and the Buyer hereby waives all rights other than those expressly written herein. This warranty shall not be extended, altered or varied except be a written instrument signed by Seller and Buyer. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the products kit. All products that are in question of Warranty must be returned prepaid to the Seller and must be accompanied by a dated proof of purchase receipt. All Warranty claims are subject to approval by BULLY DOG TECHNOLOGIES, LLC. Under no circumstances will the Seller be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product or any other contingent expenses. Under no circumstances will the Seller be liable for any damage or expenses incurred by reason of the use or sale of any such equipment. IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS AGREEMENT: THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE TO THE PLACE OF PURCHASE WITHIN TEN (10) DAYS FROM DATE OF PURCHASE FOR A FULL REFUND. THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS. 6
8 Bully Dog Technologies, LLC is a team built on integrity that is dedicated to leading the vehicle performance industry with an uncompromising code of ethics demonstrated in the soundness of its employees, excellent customer service and superior products. UNLEASH THE POWER WITH BULLY DOG PERFORMANCE PRODUCTS Downloaders Intake Systems Custom OutLook Pod Exhaust Systems See More at: bullydog.com Doc.# BD64001 Version For a full listing of Diagnostic Trouble Codes go to: For Free Technical Support Call: 866-bullydog ( )
Rapid Flow Induction Dodge Cummins 5.9L 52101
INSTALLATION Manual Rapid Flow Induction Vehicle Application Part Number 03-07 Dodge Cummins 5.9L 52101 TROUBLESHOOTING: If you have questions during the installation of this product, please visit www.bullydog.com/product_updates.php.
More informationVehicle Application: Part Numbers
INSTALLATION Manual Part Numbers Power Punch #40601 Power Punch (Adjustable) #40602 Vehicle Application: 7000 Tractor models 8000 Tractor models 9000 Combine models 7710 8100 9550 7810 8200 9650 8300 9750
More informationTractor Applications Rapid Power Model Number
INSTALLATION Manual Tractor Applications Rapid Power Model Number John Deere 8130 to 8530 40605 John Deere 8230 (T) to 8430 (T) 40605 TABLE OF CONTENTS TROUBLESHOOTING: If you have questions during the
More informationVehicle Application. Rapid Flow 4 Aluminized Exhaust Dodge Cummins 5.9L Rapid Flow 4 T-409 SST Exhaust Dodge Cummins 5.
INSTALLATION Manual Vehicle Application Part# Rapid Flow 4 Aluminized Exhaust Dodge Cummins 5.9L 94-02 182010 Rapid Flow 4 T-409 SST Exhaust Dodge Cummins 5.9L 94-02 182445 Troubleshooting/FAQ Warranty/Disccliamer
More informationFLUID DAMPER. Vehicle Applications:
INSTALLATION Manual Vehicle Applications: Vehicle description Product Part Number 94-98 5.9L Dodge Cummins 62100 98.5-02 5.9L Dodge Cummins 62101 03-06 5.9L Dodge Cummins 62102 01-06 6.6L GM Duramax 63100
More informationUNLEASH THE POWER. See More at: bullydog.com WITH BULLY DOG PERFORMANCE PRODUCTS. Doc.# BD41001 v1.0.3
Bully Dog Technologies, LLC is a team built on integrity that is dedicated to leading the vehicle performance industry with an uncompromising code of ethics demonstrated in the soundness of its employees,
More informationDual Fueler CP3 Pump Kit Installation Guide for LBZ/LMM
Dual Fueler CP3 Pump Kit Installation Guide for LBZ/LMM Supplied Parts: 19b 19c 19a 1. Control Module 2. 3/8 Inlet Fuel Line with Attached 1/2 x 1/2 x 3/8 T Connector 3. 5/16 Return Fuel Line with Attached
More informationDual Fueler CP3 Pump Kit Installation Guide for LB7
Pacific Performance Engineering, Inc. www.ppediesel.com Dual Fueler Installation Guide Dual Fueler CP3 Pump Kit Installation Guide for LB7 Supplied Parts: 1. Control Module Pulley 9. Oil Filler Tube 2.
More informationTHIS IS A HIGH PERFORMANCE PRODUCT - USE AT YOUR OWN RISK!!!
9/15/08 6.6 GM Duramax Aurora 5000 Turbo Installation Guide THIS IS A HIGH PERFORMANCE PRODUCT - USE AT YOUR OWN RISK!!! Do not use this product until you have carefully read the following agreement. This
More informationPMD DRIVER RELOCATION KIT For Chevy 6.5L Diesel Trucks
- 1 - PMD DRIVER RELOCATION KIT For 1994-1999 Chevy 6.5L Diesel Trucks Part# 1036520 -- Installation Instructions -- PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLATION. - 2 - Kit Contents BD P/N#
More informationDODGE CUMMINS 24V ISB OEM BYPASS LIFT PUMP KIT Installation Instructions Part #
2/15/2006 2000-2002 Dodge Cummins OEM Bypass Lift Pump Kit # 1050229-1 - 2000-02 DODGE CUMMINS 24V ISB OEM BYPASS LIFT PUMP KIT Installation Instructions Part # 1050229 PLEASE READ ALL INSTRUCTIONS CAREFULLY
More information½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part #
29 July 2005 2003-04.5 Dodge Cummins OEM Bypass Lift Pump Kit # 1050227-1 - 2003-04½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part # 1050227 PLEASE READ ALL INSTRUCTIONS CAREFULLY
More informationRACE PPE Manifolds and Up-Pipes
RACE ONLY High-Flow Exhaust Manifolds with Up-pipes GM DURAMAX 6.6L 2001-2015 DISCLAIMER OF LIABILITY This is a performance product which increases horsepower above factory specifications. Additional horsepower
More informationDual Fueler Kit Dodge Cummins 6.7L kit w/no pump ( ) package w/pump ( ) Installation Guide
Pacific Performance Engineering, Inc. www.ppediesel.com Dual Fueler Kit Dodge Cummins 6.7L 2007.5-2010 kit w/no pump (2130030) 2007.5-2010 package w/pump (2130031) Installation Guide Technical Support
More informationAir-Boss VP Intake Plenum
Installation Manual P/N 98502-ABIP 98.5-02 DODGE CUMMINS Air-Boss VP Intake Plenum Installation Instructions P/N 98502-ABIP GDP Air-Boss VP Plenum Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING
More informationDODGE CUMMINS Arctic-Heat Grid Relocation Kit
Installation Manual P/N 07509-350-GRK 2007.5-09 DODGE CUMMINS Arctic-Heat Grid Relocation Kit Installation Instructions P/N 07509-350-GRK GDP Arctic-Heat Grid Heater Installation PLEASE READ ALL INSTRUCTIONS
More informationPower Edge Juice Module Ford 6.0 Powerstroke Diesel
Power Edge Juice Module Ford 6.0 Powerstroke Diesel 2004, Edge Products Incorporated All rights reserved. Edge Products Incorporated 1080 South Depot Dr. Ogden, UT 84404 (801) 476-3343 www.edgeproducts.com
More informationDODGE CUMMINS Air-Boss CR Intake Plenum
Installation Manual P/N 0307-ABIP 2003-07 DODGE CUMMINS Air-Boss CR Intake Plenum Installation Instructions P/N 0307-ABIP GDP Air-Boss CR Plenum Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING
More informationL DODGE CUMMINS Maximizer System
Installation Manual P/N 07509MAX 2007.5-09 6.7L DODGE CUMMINS Maximizer System Installation Instructions P/N 07509MAX GDP Big Line Kit Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
More informationDODGE CUMMINS GDP Big Line Kit
Installation Manual P/N 9852BLK 1998.5-2002 DODGE CUMMINS GDP Big Line Kit Installation Instructions P/N 9852BLK GDP Big Line Kit Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
More informationDODGE CUMMINS GDP Twin CP-3 Big Line Kit
Installation Manual P/N 0306-TCP3 2003-07 DODGE CUMMINS GDP Twin CP-3 Big Line Kit Installation Instructions P/N 0306-TCP3 GDP Twin CP-3 Big Line Kit Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING
More informationVehicle Programming Instructions Ford Powerstroke 7.3 liter
Vehicle Programming Instructions 1994 2003 FORD Powerstroke 7.3 liter 2003, Edge Products Incorporated All rights reserved. Edge Products Incorporated 1080 South Depot Dr. Ogden, UT 84404 (801) 476-3343
More informationDodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual -
29 September 2005 Dodge Cummins Low Fuel Pressure Alarm Light Kit 1081130-33 1 1999-2005 Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual - Part Number Sequence: 1081130 Red 1081133
More informationSpeedometer Interface
Pacific Performance Engineering, Inc. www.ppediesel.com Speedometer Interface Technical Support (714) 985-4825 Rev: 12/19/12 v5 DISCLAIMER OF LIABILITY This is a performance product which can be used with
More informationL DODGE CUMMINS MK-2 + BLK APPS Mount
Installation Manual P/N MK20305-APPS 2003-05 5.9L DODGE CUMMINS MK-2 + BLK APPS Mount Installation Instructions P/N MK20305-APPS 2 Micron + Big Line Kit APPS Mount Installation PLEASE READ ALL INSTRUCTIONS
More informationDODGE CUMMINS MK-2 Micro-Kleen System
Installation Manual P/N MK20306 2003-07 DODGE CUMMINS MK-2 Micro-Kleen System Installation Instructions P/N MK20306 2 Micron Fuel Filter Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
More informationDodge Cummins 5.9L 24 Valve Edge Products EZ Module Installation Instructions & Manual
1998.5-2002 Dodge Cummins 5.9L 24 Valve Edge Products EZ Module Installation Instructions & Manual OLD P/N s: EZD1000 / EZD1000A / EZD1000B NEW P/N s: 30200 / 30201 2007 Edge Products All rights reserved.
More informationAttitude Instructions Ford 6.0 Powerstroke
Attitude Instructions Ford 6.0 Powerstroke Attitude 2003, Edge Products Incorporated All rights reserved. Edge Products Incorporated 5875 South Adams Avenue Suite 100 Ogden, UT 84405 (801) 476-3343 www.edgeproductsinc.com
More informationOwner s Manual Ford Powerstroke 7.3 liter CAUTION: THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK.
Owner s Manual 1994 2003 Ford Powerstroke 7.3 liter CAUTION: THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK. Edge Products Inc distributed by BD Power Evolution FORD Powerstroke 7.3 liter - 1
More information20250 Module Installation Guide
20250 Module Installation Guide 2013.5-2017 RAM 6.7L Cummins Up to 90HP Gain 1-3 MPG Fuel Savings AgDieselSolutions.com Adjustable switch connector Power +12 volts (Red wire) & Ground (Black wire) Injector
More informationStage4 Installation Guide STAGE 4 TRANSMISSION KIT INSTALLATION GUIDE Allison LB7/ LLY only for 5 speed trasmissions
STAGE 4 TRANSMISSION KIT INSTALLATION GUIDE 2001-2005 Allison LB7/ LLY only for 5 speed trasmissions DISCLAIMER OF LIABILITY This is a performance product which can be used with increased horsepower above
More informationMega-Rail System Installation
Installation Manual Mega-Rail System P/N 030767-MRS 2003-2007 DODGE CUMMINS Mega-Rail System Installation Installation Instructions GDP 03-07 Mega-Rail System P/N 030767-MRS PLEASE READ ALL INSTRUCTIONS
More informationDfuser T/C Lock-Un Lock
Dfuser T/C Lock-Un Lock Performance Diesel and more! For more information visit our website at: http://www.dfuser.com Page 1 of 6 User Guide This harness overrides and monitors Torque Converter (T/C) lockup
More informationGDP STREET-GATE 38mm Wastegate System
Installation Manual STREET-GATE 38mm Wastegate System P/N SG67-38MM-7510 GDP STREET-GATE 38mm Wastegate System 07.5-10 DODGE CUMMINS Installation Instructions STREET-GATE 38mm Wastegate Kit p/n SG67-38MM-7510
More information30100 Module Installation Guide L
30100 Module Installation Guide 1997-2006 12.0L Mack Engines Up to 30% HP Gain 10-20% Fuel Savings AgDieselSolutions.com 1997-2006 Mack 12.0L Engine Module +12 volts red wire. Ground black wire Injector
More information15100 Module Installation Guide Mercedes EPA07 w/dpf
15100 Module Installation Guide 2007-2009 Mercedes EPA07 w/dpf 7.2L Engines Up to 30% HP Gain 10-20% Fuel Savings AgDieselSolutions.com 2007-2009 Mercedes 7.2L Engine Module +12 volts red wire. Ground
More informationAssembly Instructions
TOOLS REQUIRED: _(2) 3/4 wrenches _7/16 wrench _3/8 wrench _5/16 allen wrench Display/work stand is for assembly procedure only. May be purchased separately. CONTENTS (PARTS & HARDWARE) _(1) Receiver tube
More informationCummins-2004 Dodge Edge EZ Module Installation Instructions and Manual
Cummins-2004 Dodge Edge EZ Module Installation Instructions and Manual 2004, 2005 All rights reserved. 1080 South Depot Dr. Ogden, UT 84404 (801) 476-3343 www.edgeproducts.com Manual Version 110105 Table
More informationMercedes MBE 906/ L & 7.2L Engine Module. Part # Installation Instructions
1999-2006 Mercedes MBE 906/926 6.4L & 7.2L Engine Module Part # 15000 Installation Instructions 15000_revC 1999-2006 Mercedes 6.4L & 7.2L Engine Module +12 volts red wire. Ground black wire Injector Terminals
More informationDfuser T/C Lock Override with LED
Dfuser T/C Lock Override with LED the bug that has no cure For more information visit our website at: http://www.dfuser.com Page 1 of 7 User Guide This harness overrides and monitors Torque Converter (T/C)
More informationUNLEASH THE POWER. See More at: bullydog.com WITH BULLY DOG PERFORMANCE PRODUCTS. Doc.# BD40009 v1.0.0
Bully Dog Technologies, LLC is a team built on integrity that is dedicated to leading the vehicle performance industry with an uncompromising code of ethics demonstrated in the soundness of its employees,
More informationDfuser Stage I Power Module DT-466, DT-570, and HT-570
Dfuser Stage I Power Module DT-466, DT-570, and HT-570 Copyright 2004, 2005, 2006 dfuser.com, LLC. All rights reserved. Page 1 of 6 User Guide What Gain as much as +35HP and 90ft/lbs of torque!, plus improve
More informationTwin Turbo Installation Instructions
Twin Turbo Installation Instructions Pacific Performance Engineering 303 N Placentia Ave. Fullerton, CA 92831 www.ppediesel.com Legal in California only for racing vehicles which may never be used on the
More informationCU6703 Module Installation Guide
Up to 30% More Horsepower 10-20% Fuel Savings Cummins 6.7L Tier III Engines CU6703 Module Installation Guide AgDieselSolutions.com MAP sensor male and female connectors. Power and Ground wires. Module
More informationL DODGE CUMMINS MK-2 High Flow Fuel Filter Kit
Installation Manual P/N MK21318-BLK (non-heated) P/N MK21318-BLKH (heated) 2013-2018 6.7L DODGE CUMMINS MK-2 High Flow Fuel Filter Kit Installation Instructions P/N MK21318-BLK (non-heated) P/N MK21318-BLKH
More informationFemale Plug. connecting to Fuel Quantity
**Ag Diesel Solutions recommends replacing the Transorb/Suppressor Diode before the installation of this module*** Red wire = 12V Constant power. Male Plug connecting to Fuel Quantity Valve Black wire
More informationJDCR2000 Module Installation Guide
Up to 30% More Horsepower 10-20% Fuel Savings John Deere 4.5L, 8.1L & 9.0L Tier III Denso Common Rail Engines JDCR2000 Module Installation Guide AgDieselSolutions.com FEMALE FUEL PRESSURE CONNECTOR (FPC)
More informationTS PERFORMANCE WE ARE DIESEL
TS PERFORMANCE WE ARE DIESEL MP-8 6.7L Cummins 4110803 Installation Manual Thank you for buying the MP-8 for the 6.7L Cummins. Here you will learn how to install this MP-8 into your tractor, and we guarantee
More informationCummins N14 Celect & Celect Plus Engine Module. For Agricultural Applications Only. Part # 31200
1994-2003 Cummins N14 Celect & Celect Plus Engine Module For Agricultural Applications Only Part # 31200 31200_revA Adjustable Switch Agricultural Cummins N14 Engine Module Power and Ground terminals Timing
More informationGM 6.6L Duramax. Up to 90HP Gain. AgDieselSolutions.com
21700 Module Installation Guide 2017 GM 6.6L Duramax *L5P* Up to 90HP Gain 1-3 MPG Fuel Savings AgDieselSolutions.com Adjustable Switch Female Fuel Pressure Sensor Connector Male Fuel Pressure Sensor Connector
More informationInstallation Instructions
1 BD DODGE CUMMINS PERFORMANCE E X H A U S T M A N I F O L D Installation Instructions Application List 1994-1998 12V 1045980 1998½-2002 24V 1045985 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION KIT
More informationJD2800 Module Installation Guide
Up to 30% More Horsepower 10-20% Fuel Savings John Deere 9.0L Tier III Denso Common Rail Engines JD2800 Module Installation Guide AgDieselSolutions.com Ground Terminal Power (+12V constant) Terminal Injector
More informationLB7/ LLY Allison 5 speed transmissions
PPEdiesel.com STAGE 4 TRANSMISSION KIT INSTALLATION GUIDE 2001-2005 LB7/ LLY Allison 5 speed transmissions Technical Support (714) 985-4825 Rev: 01/31/18 v7 DISCLAIMER OF LIABILITY This is a performance
More informationINSTALLATION Manual. DODGE cummins 5.9L. RealTruck.Com Days A Week
INSTALLATION Manual DODGE cummins 5.9L 2 Monitor 1 REMEMBER THIS IS A PERFORMANCE PRODUCT, USE AT YOUR OWN RISK. This product is not intended to be used to break the law. Do not use this product until
More informationVehicle Application Triple Dog Part # OutLook Combo# Dodge 5.9L Cummins Dodge 5.9L Cummins Ford 7.
INSTALLATION Manual Vehicle Application Triple Dog Part # OutLook Combo# 03-05 Dodge 5.9L Cummins 40500 42500 06-07 Dodge 5.9L Cummins 40500 41500 99.5-03 Ford 7.3 L Power Stroke 40500 N/A 03-07 Ford 6.0
More informationDfuser Eighteen-K Plus Power Module the bug that has no cure
Dfuser Eighteen-K Plus Power Module the bug that has no cure Copyright 2004, 2005, 2006 dfuser.com, LLC. All rights reserved. Page 1 of 6 User Guide What Known as the 18K module, this device is designed
More informationATS Diesel Performance 5293 Ward Road Arvada, CO E-Power Programmer. Toll free
ATS Diesel Performance 5293 Ward Road Arvada, CO. 80002 www.atsdiesel.com Dodge Ram 2003-2005 2003-2006 E-Power Programmer Toll free 800.949.6002 DISCLAIMER OF LIABILITY This is a performance product which
More informationInstallation Instructions
August 04 BD Camplate Installation -1- BD POWER CAMPLATE KIT Installation Instructions PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLATION. NOTE: Unless this product has been identified with a CARB
More informationInstallation Instructions. Application List Dodge 24V PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION
1 BD DODGE CUMMINS 03-055 C O O L - I T I N T E R C O O L E R Installation Instructions Application List 2003-2006 Dodge 24V 1042510 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION KIT CONTENTS: Please
More informationDodge Cummins 5.9L Edge Comp Module Installation Instructions & Manual OLD P/N s: ECD2000, ECD2000A & ECD2000B NEW P/N s: 30300, 30301,
1998.5-2002 Dodge Cummins 5.9L Edge Comp Module Installation Instructions & Manual OLD P/N s: ECD2000, ECD2000A & ECD2000B NEW P/N s: 30300, 30301, 30301 Table of Contents DISCLAIMER OF LIABILITY 3 LIMITATION
More informationDfuser Eighteen-K Plus Power Module T444E Special Edition the bug that has no cure
Dfuser Eighteen-K Plus Power Module T444E Special Edition the bug that has no cure Copyright 2004, 2005, 2006 dfuser.com, LLC. All rights reserved. Page 1 of 7 User Guide What This device is designed for
More information6032 Jacksboro Highway, #100 Fort Worth, Tx MADE IN THE U.S.A.
6032 Jacksboro Highway, #100 Fort Worth, Tx 76135 817-306-2444 888-842-6572 I N S T A L L A T I O N I N S T R U C T I O N S D O D G E 9 8. 5-0 2 MADE IN THE U.S.A. w w w. q u a d z i l l a p o w e r. c
More informationCustom OutLook Pod. Exhaust Systems. See More at: bullydog.com. For Free Technical Support Call: 866-bullydog ( )
Downloaders Intake Systems Custom OutLook Pod Exhaust Systems See More at: bullydog.com For Free Technical Support Call: 866-bullydog (866-285-5936) DODGE CUMMINS 5.9L 2006 Ford POWER STROKE 6.0L 2003-2006
More informationPart# Accessory Power Distribution Module
7 February 2006 Power Pod (1038800) Page 1 BD Powe r Pod Installation Instructions Part# 1038800 Accessory Power Distribution Module Power Pod Specifications: Eliminate multiple T-taps and splices on OEM
More informationDuramax LB7 / LLY / LBZ / LMM
Pacific Performance Engineering, Inc. www.ppediesel.com 2001-2009 Duramax LB7 / LLY / LBZ / LMM Economy / Standard / Hot Installation Guide Made in the U.S.A ATTENTION: Please read instructions carefully
More information, TABLE OF CONTENTS. Contents... PG.2 Installa9on. PG.3-6 Troubleshoo9ng...PG.7 Updates PG.8. Introduc9on
Introduc9on TABLE OF CONTENTS Contents...... PG.2 Installa9on. PG.3-6 Troubleshoo9ng...PG.7 Updates PG.8 8210202, 8210203 TS Performance looks forward to serving the technical needs you may run into, however,
More informationFor electronically controlled E4OD and 4R100 automatic transmissions ** READ ALL INSTRUCTIONS BEFORE INSTALLATION **
26 August 2005 Ford PressureLoc #1060380 1 BD Ford PressureLoc Installation Manual For electronically controlled E4OD and 4R100 automatic transmissions Part#: 1060380 ** READ ALL INSTRUCTIONS BEFORE INSTALLATION
More informationTS PERFORMANCE WE ARE DIESEL. Re-Speed
TS PERFORMANCE WE ARE DIESEL TS Performance Products Re-Speed 1190101 Tire Calibration and Speed Limiter Removal Operation & Installation Manual Installation of the TS Performance Re-Speed Read all instructions
More informationMechanical Lift Pump System
Installation Manual FUEL BOSS Mechanical LP P/N FB-03045 2003 2004.5 DODGE CUMMINS FUEL BOSS Mechanical Lift Pump System Installation Instructions Fuel Boss LP System p/n FB-03045 PLEASE READ ALL INSTRUCTIONS
More informationINSTALLATION MANUAL DURAMAX DIESEL POWERED PICKUP TRUCKS MODEL RP-100 & RP-150. With New Quick Connect Components!
INSTALLATION MANUAL 2001-2009 DURAMAX DIESEL POWERED PICKUP TRUCKS MODEL RP-100 & RP-150 With New Quick Connect Components! PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION! 705
More information9/8/ ½-2004 Dodge 5.9L Cummins Flow-MAX Lift Pump Retro Kit # ½ L DODGE CUMMINS. Installation Instructions
9/8/2008 1998½-2004 Dodge 5.9L Cummins Flow-MAX Lift Pump Retro Kit # 1050302-1 - 1998½-2004 5.9L DODGE CUMMINS RETRO FIT INTAKE PUMP Kit Installation Instructions P/N# 1050302 PLEASE READ ALL INSTRUCTIONS
More informationDodge 24v ISBe
BD SUPER B 2003-2004 Dodge 24v ISBe (Non 600 motors) Part # 1045230 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION This turbo system is not compatible with an AFE intake system WITHOUT MODIFICATIONS.
More informationDODGE CUMMINS 24V ISB
6 November 2009 2000-2002 Dodge Cummins FlowMAX Lift Pump Kit # 1050301B - 1-2000-02 DODGE CUMMINS 24V ISB FLOWMAX LIFT PUMP KIT Installation Instructions Part# 1050301B PLEASE READ ALL INSTRUCTIONS CAREFULLY
More informationPro RMK Install
PHANTOM TETH-AIR TM 2013-15 Pro RMK Install : 1 1. Using 2 sided adhesive foam tape; stick the Upper Control Unit to the front of the throttle block as shown. 2. Use the long plastic cable ties to secure
More informationOwner smanual. Banks Big Hoss Intake Manifold System Chevy/GMC Duramax Turbo-Diesel Engines. with Installation Instructions
Owner smanual with Installation Instructions Banks Big Hoss Intake Manifold System 2001-2007 Chevy/GMC Duramax Turbo-Diesel Engines THIS MANUAL IS FOR USE WITH KITS 42733 Gale Banks Engineering 546 Duggan
More informationBD SUPER B SPECIAL Dodge 5.9L Cummins 24v ISB
1 This turbo is intended for high performance applications and is not to be used for towing applications BD SUPER B SPECIAL 1994-2002 Dodge 5.9L Cummins 24v ISB Part# 1045120 PLEASE READ ALL INSTRUCTIONS
More informationINSTALLATION MANUAL #29 FOR CHEVY DIESEL PICKUP TRUCKS. MODEL RP-100 & RP-150 With New Quick Connect Components
INSTALLATION MANUAL #29 FOR Fuel Inlet ON Left Side 1992-2000 CHEVY DIESEL PICKUP TRUCKS Fuel Inlet ON Left Side MODEL RP-100 & RP-150 With New Quick Connect Components READ THESE INSTRUCTIONS THOROUGHLY
More information6.0L Ford Powerstroke 2003 THROUGH 2007
INSTALLATION MANUAL #32 6.0L Ford Powerstroke 2003 THROUGH 2007 MODEL RP-100 & RP-150 Supplemental Lift Pump With New Quick Connect Components! PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING
More information7.3L Ford PowerStroke
INSTALLATION MANUAL #31 7.3L Ford PowerStroke 1999-2003 MODEL RP-100 & RP-150 Supplemental Lift Pump With New Quick Connect Components! PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION!
More informationBD Ford 1999½ L Power Stroke CRANKCASE VENTILATION KIT
30 October 2008 1999.5 2003 FORD 7.3L CCV Kit 1 BD Ford 1999½-2003 7.3L Power Stroke CRANKCASE VENTILATION KIT P/N#: 1032170 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION 30 October 2008 1999.5 2003
More informationCRANKCASE VENTILATION KIT
30 October 2008 2004-07 Ford 6.0L CCV Kit 1 BD Ford 2004-2007 6.0L Powerstroke CRANKCASE VENTILATION KIT P/N# 1032175 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION 30 October 2008 2004-07 Ford 6.0L
More information2004½-2007 Dodge 5.9L Cummins 24v ISBe (600 motors only)
31 October 2006 Part # 1045235-1 - BD Supe r B Single 2004½-2007 Dodge 5.9L Cummins 24v ISBe (600 motors only) Part # 1045235 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION. Note: This turbo system is
More informationINSTALLATION MANUAL FOR 24 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 1998 ½ THROUGH 2002 MODEL RP-100 & RP-150
INSTALLATION MANUAL FOR 24 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 1998 ½ THROUGH 2002 MODEL RP-100 & RP-150 With New Quick Connect Components! READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION
More informationTable of Contents. Disclaimers Warranty... 5 Gas Tuner Instructions Diesel Tuner Instructions Fuse Removal...
INSTALLATION Table of Contents Disclaimers... 3-4 Warranty... 5 Gas Tuner Instructions... 6-10 Diesel Tuner Instructions... 11-14 Fuse Removal... 15 2 Release The Beast Thanks for your purchase of a Quadzilla
More informationINSTALLATION MANUAL #24 FOR 12 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 1989 THROUGH MODEL RP-100 & RP-150 With New Quick Connect Components!
INSTALLATION MANUAL #24 FOR 12 VALVE 5.9L CUMMINS POWERED DODGE TRUCKS 1989 THROUGH 1993 MODEL RP-100 & RP-150 With New Quick Connect Components! READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION
More informationBD Cummins VE Fuel Pin Kit
14 October 2009 1040178 1988-93 Dodge VE Fuel Pin 1 BD Cummins 1988-93 VE Fuel Pin Kit P/N# 1040178 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION Please note this product has not been evaluated by the
More informationSOARER TT BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
IMPORTANT NOTES ON FITTING YOUR BOV SOARER TWIN TURBO ADAPTOR Turbosmart recommends that your Blow Off Valve (BOV) and Adaptor kit is fitted by an appropriately qualified technician. ADAPTOR KIT CONTENTS
More informationBD Torq/Un-Loc. Torque Converter Control System Part# ENSURE YOU READ ALL INSTRUCTIONS BEFORE INSTALLING THIS PRODUCT
6 December 2005 Torq/UnLoc #1030398 1 BD Torq/Un-Loc Torque Converter Control System Part# 1030398 ENSURE YOU READ ALL INSTRUCTIONS BEFORE INSTALLING THIS PRODUCT 6 December 2005 Torq/UnLoc #1030398 2
More informationSUPRA JZA80 TWIN TURBO BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
IMPORTANT NOTES ON FITTING YOUR SUPRA TWIN TURBO ADAPTOR Turbosmart recommends that your Blow Off Valve (BOV) and Adaptor kit is fitted by an appropriately qualified technician. ADAPTOR KIT CONTENTS Please
More information7.3L POWERSTROKE BANJO BOLT KIT Fits L Powerstroke Diesel. Installation Guide
7.3L POWERSTROKE BANJO BOLT KIT Fits 94-03 7.3L Powerstroke Diesel Installation Guide INSPECT CONTENTS OF THIS KIT THOROUGHLY BEFORE STARTING THE INSTALLATION PROCESS! IF YOU FIND A PROBLEM WITH YOUR PACKAGE:
More information2017 FIAT 124 Spider 1.4L MultiAir Turbo MADNESS Autoworks MAXPower ECM Module Installation Instructions & Manual Part Numbers
2017 FIAT 124 Spider 1.4L MultiAir Turbo MADNESS Autoworks MAXPower ECM Module Installation Instructions & Manual Part Numbers 1 SAFETY INFORMATION The MADNESS product you have purchased is a high performance
More informationL/6.7L DODGE CUMMINS
11/6/2009 2005-08 5.9/6.7 Dodge Cummins FlowMAX Lift Pump Kit # 1050310B - 1-2005-08 5.9L/6.7L DODGE CUMMINS BD FLOWMax V2 LIFT PUMP KIT Installation Instructions P/N # 1050310B PLEASE READ ALL INSTRUCTIONS
More informationInstallationManual. Banks SpeedBrake Chevy/GMC 6.6L (LLY) Turbo-Diesel Pickup. For use with Palm Tungsten E2
InstallationManual Banks SpeedBrake For use with Palm Tungsten E2 2004-2005 Chevy/GMC 6.6L (LLY) Turbo-Diesel Pickup THIS MANUAL IS FOR USE WITH KITS 55419 & 55421 Gale Banks Engineering 546 Duggan Avenue
More informationDuramax GM 6.6L Duramax Diesel LB7/LLY/LBZ/LMM ( )
PPEdiesel.com Duramax GM 6.6L Duramax Diesel 2001-2010 LB7/LLY/LBZ/LMM (111001800) User Guide Maximum performance designed for closed course racing applications. Technical Support (714) 985-4825 Rev: 06/06/18
More informationBanks Speed-Loader Chevy/GMC 6.6L (LMM) Duramax Turbo-Diesel Pickups THIS MANUAL IS FOR USE WITH KIT 63838
Banks Speed-Loader 2007-2008 Chevy/GMC 6.6L (LMM) Duramax Turbo-Diesel Pickups THIS MANUAL IS FOR USE WITH KIT 63838 Gale Banks Engineering 546 Duggan Avenue Azusa, ca 91702 (626) 969-9600 Fax (626) 334-1743
More informationOwner smanual. Banks Ram-Air Filter. with Silencer Delete Tube L EcoDiesel Ram with Installation Instructions
with Installation Instructions Owner smanual Banks Ram-Air Filter with Silencer Delete Tube 2014-2015 3.0L EcoDiesel Ram 1500 THIS MANUAL IS FOR USE WITH SYSTEM 42260 Gale Banks Engineering 546 Duggan
More informationINSTALL GUIDE Dodge/RAM 5.7L HEMI
INSTALL GUIDE 2009-2017 Dodge/RAM 5.7L HEMI TABLE OF CONTENTS 3 GETTING STARTED 3 PARTS LIST 4 INSTALLATION INSTRUCTIONS 4 REMOVING THE STOCK INTAKE ASSEMBLY 6 INSTALLING THE AIR FILTER 7 INSTALLING THE
More informationProduct Name: Product Description: Product Number: Comp-Gate40 40mm External TS-0505-1XXX ------------------------------------------------------------------------------------------------------------------------
More informationInstallation Steps. Vehicle Application
Installation Steps INSTALLATION Manual Vehicle Application Part# Dyno Dominator 03-04 Ford Power Stroke 41065 Dyno Dominator w/outlook 03-04 Ford Power Stroke 41076 rapid power 03-04 Ford Power Stroke
More informationHOW TO INSTALL YOUR BOV
Product Name: Product Description: Product Number: BMW Kompact BOV Kit Model specific BOV Kit TS-0203-1050/TS-0203-1250 ------------------------------------------------------------------------------------------------------------------------
More information