Biax D and D/E. GE Lighting DATA SHEE T. Compact Fluorescent Lamps Non-Integrated 10W, 13W, 18W and 26W

Size: px

Start display at page:

Download "Biax D and D/E. GE Lighting DATA SHEE T. Compact Fluorescent Lamps Non-Integrated 10W, 13W, 18W and 26W"

Christiana Lloyd
5 years ago
Views:

GE Lighting Biax D and D/E Compact Fluorescent Lamps Non-Integrated 1W, 13W, 18W and 26W DATA SHEE T Product information Biax D & D/E LongLast lamps are available in 1, 13, 18 and 26 watt ratings, 1

1 GE Lighting Biax D and D/E Compact Fluorescent Lamps Non-Integrated 1W, 13W, 18W and 26W DATA SHEE T Product information Biax D & D/E LongLast lamps are available in 1, 13, 18 and 26 watt ratings, 1 and 13W in T3 tube size, 18 and 26W in T4 tube size and ranging from 11mm to 174mm in length. Five colours are available in two-pin and four-pin caps. A high colour rendering index (CRI) of 82 gives rich, vibrant colour. The lamps are available in warm and cool colour temperatures suitable for a wide variety of environments. Features Up to 8% energy saving versus normal incandescent lamps Lasts 1 times longer than standard incandescent lamps High colour rendering index 82Ra Full range of colour temperatures 27, 3, 3, 4 and 6K 4 -pin lamps for use with electronic gear may be used with dimmers Application Areas: Hospitality Retail

2 Basic data Wattage Wattage on Energy consumption [kwh/h] Voltson [V] Product Description Product Code [lm] [lm] Lamp Efficacy on [lm/w] CCT [K] CRI [Ra] Mercury [mg] Life on Diameter Length 3h-cycle [h] EEC PackQty Biax D 2-pin, Internal Starter G24d-1 F1DBX/T3/827/2P , 34,4 18 B G24d-1 F1DBX/T3/83/2P , B G24d-1 F1DBX/T3/835/2P , B G24d-1 F1DBX/T3/84/2P , B G24d-1 F1DBX/T3/865/2P , B G24d-1 F13DBX/T3/827/2P , A G24d-1 F13DBX/T3/83/2P , A G24d-1 F13DBX/T3/835/2P , A G24d-1 F13DBX/T3/84/2P , A G24d-1 F13DBX/T3/865/2P , A G24d-2 F18DBXT4/SPX27/ , B G24d-2 F18DBXT4/SPX3/ , B G24d-2 F18DBXT4/SPX35/ , B G24d-2 F18DBXT4/SPX41/ , B G24d-2 F18DBXT4/SPX65/ , B G24d-3 F26DBXT4/SPX27/ , B G24d-3 F26DBXT4/SPX3/ , B G24d-3 F26DBXT4/SPX35/ , B G24d-3 F26DBXT4/SPX41/ , B G24d-3 F26DBXT4/SPX65/ , B 1 Wattage Wattage on Energy consumption [kwh/h] Voltson [V] Product Description Product Code [lm] [lm] Lamp Efficacy on [lm/w] CCT [K] CRI [Ra] Mercury [mg] Life on electronic Diameter Length gear 12h-cycle [h] EEC PackQty Biax D/E LongLast 4-pin, External Starter Required G24q-1 F1DBX/T3/827/4P , A G24q-1 F1DBX/T3/83/4P , A G24q-1 F1DBX/T3/835/4P , A G24q-1 F1DBX/T3/84/4P , A G24q-1 F1DBX/T3/865/4P , A G24q-1 F13DBX/T3/827/4P , A G24q-1 F13DBX/T3/83/4P , A G24q-1 F13DBX/T3/835/4P , A G24q-1 F13DBX/T3/84/4P , A G24q-1 F13DBX/T3/865/4P , A G24q-2 F18DBX/SPX27/827/4P , A G24q-2 F18DBX/SPX3/83/4P , A G24q-2 F18DBX/SPX35/835/4P , A G24q-2 F18DBX/SPX41/84/4P , A G24q-3 F26DBX/SPX27/827/4P , A G24q-3 F26DBX/SPX3/83/4P , A G24q-3 F26DBX/SPX35/835/4P , A G24q-3 F26DBX/SPX41/84/4P , A G24q-3 F26DBX/SPX65/865/4P , A 1 Biax D/E LongLast 4-pin average life with on 3 hours per start is 12, hours. Dimensions 2 Lmax. Lmax. G24q-1 G24q-2 G24q-3 Lmax. Lmax. G24d-1 G24d-2 G24d-3 Wattage Biax D 2-pin Lmax Biax D/E LongLast 4-pin

Lamp life average life for Biax D LongLast is 12, hours (switching cycle: 2hrs 45min ON/15min OFF, see Graph A) and D/E LongLast is 2, hours (switching cycle: 11hrs ON/1hrs OFF, see graph B).

Typical lifetime characteristics are based on GE Lighting s measurements according to the relevant IEC standards.

For instance improper cathode preheat, too high operating current, or too low operating current without additional cathode heating reduces the expected life.

3 Lamp life average life for Biax D LongLast is 12, hours (switching cycle: 2hrs 45min ON/15min OFF, see Graph A) and D/E LongLast is 2, hours (switching cycle: 11hrs ON/1hrs OFF, see graph B). Cathodes of a fluorescent lamp lose their electron-emissivity during life due to the evaporation of emission mixture. When the deterioration reaches a certain level, the cathode breaks. Typical lifetime characteristics are based on GE Lighting s measurements according to the relevant IEC standards. The declared lamp life is the median life, which is when % of the lamps from a large sample batch would have failed. Real lifetime figures may depend on actual application. For instance improper cathode preheat, too high operating current, or too low operating current without additional cathode heating reduces the expected life. Survival in % % 9% 8% 7% 6% % Biax D on standard gear Survival rate 3 h cycle maintenance Graph A 4 6, 8, 1, 12, Operating hours Hours Survival rate 3h cycle maintenance maintenance maintenance graph shows how the luminous output decreases throughout life. The main causes of the light depreciation are the deterioration of phosphor coating and the lamp blackening due to the deposition of evaporated emission mixture on the glass tube. These effects are unavoidable. maintenance curve presented here for Biax D and D/E LongLast lamps are based on lumen readings under laboratory conditions. Test conditions: Photometric sphere Vertical, cap up burning position Switching cycle: 11 hours On 1 hour Off High frequency operation 25 C ambient temperature See graph A and B. Survival in % % 9% 8% 7% 6% % Hours Biax D/E on electronic gear Survival rate 12 hours maintenance Survival rate 3 hours 2, 4, 6, 8, 1, 12, 14, 16, 18, 2, Survival rate 12 hours Operating hours maintenance Survival rate 3 hours 2, , , , , , Graph B Life versus frequency of switching Life versus frequency of switching Graph C For impact on life of alternative switching cycles refer to the Graph C. For applications where a fast switching cycle is required it is possible to minimise the effect of switching on lamp life with the use of a suitable electronic gear with a 4-pin lamp. Relative life gear Electronic gear Hours/switching 3

Luminous intensity distribution The luminous intensity distribution describes the quantity of light that is radiated in a particular direction.

The left plot of Graph D shows horizontal while the right plot shows the vertical light intensity distribution plots.

4 Luminous intensity distribution The luminous intensity distribution describes the quantity of light that is radiated in a particular direction. Graph D shows luminous intensity distribution curve of Biax D & D/E lamps. Tests were taken with lamps burning in vertical cap up position. The left plot of Graph D shows horizontal while the right plot shows the vertical light intensity distribution plots. Radial luminous intensity distribution (horizontal) Radial luminous intensity distribution (vertical) Graph D Burning position: cap up Graph D output vs. ambient air temperature Photometrical and light parameters of a fluorescent lamp depend on the mercury vapor pressure inside the lamp. Mercury vapor pressure in turn is controlled by temperature. When installed in a luminaire, the temperature of the air surrounding the lamp cap changes and this can affect the light output of the lamp. The effects of changes in ambient temperature for a typical lamp are shown in Graph E. Relative light output% Light output of DBX lamps vs ambient temperature vertical base up burning position DBX 1W on electronic gear DBX 13W on electronic gear DBX 18W on electronic gear DBX 26W on electronic gear General DBX Ambient Temperature in C Graph E Spectral distribution 2 Spectral Power Distribution [27K] 2 Spectral Power Distribution [3K]

5 Spectral Power Distribution [3K] Spectral Power Distribution [4K] Spectral Power Distribution [6K] Biax D/E compatibility with other 4pin cap lamps Biax D Compatibility with Biax T 2pin Lamps 2pin BiaxTM D (Double) F1DBX F13DBX G24d-1 2pin BiaxTM T (Triple) Biax D Compatibility with Biax T 4pin Lamps 4pin BiaxTM T (Triple) F13TBX F18TBX F26TBX 4pin BiaxTM D (Double) F13TBX/4P F18TBX/4P F26TBX/4P Gx24d-1 Gx24d-2 Gx24d-3 Gx24q-1 Gx24q-2 Gx24q-3 yes F1DBX/4P F13DBX/4P G24q-1 F18DBX G24d-2 yes F18DBX/4P G24q-2 yes F26DBX G24d-3 yes F26DBX/4P G24q-3 yes yes Circuit diagrams E = Electronic LH = Lamp Holder Biax D/E 1W, 13W, 18W and 26W Supply Voltage E Parallel Compensated B = Ballast (Hz) LH = Lamp Holder Biax D 1W, 13W, 18W and 26W Supply Voltage B LH LH 5

6 Light colour applications Warm; Warm White 27 K Specialty retailers, restaurants, hotel lobbies, residential applications Neutral; Neutral White 3-3 K Grocery stores & produce markets, retail stores, bank lobbies Cool; Cool White 4 K Offices, manufacturing, schools, hospitals Daylight 6 K Printers, paint studios, art galleries, car dealerships specification Cathode resistances Power Resistance values measured a test current Values conform IEC 691 related datasheets Datasheet 691-IEC Test current [A] Cathode Itest Min. 1 G24q G24q G24q G24q Max. Cathode preheat requirements Power Datasheet 691-IEC Qmin [J] Preheat time shall be longer than.4s and shorter than 3s Ballast preheat energy shall be measured with substitution resistance of above table Values conform IEC 691 related datasheets Emin = Qmin + Pmin*ts Pmin Rsub,min Emax = Qmax + Pmax*ts 1 G24q G24q G24q G24q Qmax [J] Pmax Rsub,max Dimming requirements Power Datasheet 691-IEC In the dimming range of the lamp operating current Idmin Idmax Minimum SoS = ILH2+IL=X-Y*Id Target SoS = ILH2+IL=X-.3*Y*Id Idmax for dimming operation = Idmin for normal operation Values conform IEC proposal When the new fluorescent lamp is installed into dimming system, it is advised to operate lamps for period of hours at full light output. Idmin [A] 1 G24q G24q G24q G24q Idmax [A] X [A2] Y [A] 6

7 Starting requirements Power Datasheet 691-IEC Ignition voltage [Vrms] Ballast open circuit voltage shall be measured with substitution resistance of above table Values conform IEC 691 related datasheets Non-ignition voltage [Vrms] 1 G24q G24q G24q G24q Rsub Recommended list of ballasts* Wattage Lamp description Ballast manufacturer Single ballast description Twin ballast description Biax D/E LongLast 4-pin 1W F1DBX/SPX27/827/4P Tridonic Atco Helvar Vossloh-Schwabe Biax D/E LongLast 4-pin 13W F13DBX/SPX27/827/4P Tridonic Atco Helvar Vossloh-Schwabe Biax D/E LongLast 4-pin 18W F18DBX/SPX27/827/4P Tridonic Atco Helvar Vossloh-Schwabe Biax D/E LongLast 4-pin 26W F26DBX/SPX27/827/4P Tridonic Atco Helvar Vossloh-Schwabe *Ballast manufacturers have the right to change ballast specification without prior notification or official announcement so these data based on GE measurement 21/211. PC 1x1-13 TCD PRO EL 1/2x9-13TCs ELXc PC 1x5 16 W Basic EL 1/2x9-13TCs ELXc PC 1x18 TCD PRO E/2x18TCs ELXc PC 1x26/32/42 TCT PRO EL 1/2x18-42TCs ELXc PC 2/1/13 TCD PRO EL 1/2x9-13TCs PC 2/1/13 TCD PRO EL 1/2x9-13TCs PC 2/18 TCD PRO E/2x18TCs PC 2x26/32 TCT PRO EL 1/2x18-42TCs ELXc

8 Compliance s IEC IEC or EN 691 IEC or EN CIE S 9/E:2 European Directives CE mark Energy Labelling RoHS WEEE REACH ErP ecodesign Lamp caps and holders together with gauges for the control of interchangeablity and safety Single-capped lamps - performance requirements Single-capped lamps - safety requirements Photobiological safety of lamps and lamp systems 93/68/EEC; LVD: 6/95/EC; Ecodesign 5/32/EC, ROHS 211/65/EU Directive 21/3/EU, 874/212/EU energy labelling of electrical lamps and luminaires Directive 211/65/EU on Restrictions of the use of certain Hazardous Substances (RoHS) Directive 212/19/EU on Waste Electrical and Electronic Equipment (WEEE) Directive 6/197/EC on Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Directive 5/32/EC, 9/245/EC ecodesign requirements (of Energy-related Products) for tertiary sector lamps and General Electric are both registered trademarks of the General Electric Company GE Lighting is constantly developing and improving its products. For this reason, all product descriptions in this brochure are intended as a general guide, and we may change specifications time to time in the interest of product development, without prior notification or public announcement. All descriptions in this publication present only general particulars of the goods to which they refer and shall not form part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, GE Lighting cannot accept any liability arising from the reliance on such data to the extent permitted by law. Biax D and DE Data Sheet October 213

Biax D and D/E. Compact Fluorescent Lamps Non-Integrated 10W, 13W, 18W and 26W. GE Lighting DATA SHEET. Product information.

Biax D and D/E. Compact Fluorescent Lamps Non-Integrated 10W, 13W, 18W and 26W. GE Lighting DATA SHEET. Product information. GE Lighting Biax D and D/E Compact Fluorescent Lamps Non-Integrated 1W, 13W, 18W and 26W DATA SHEET Product information Biax D & D/E LongLast lamps are available in 1, 13, 18 and 26 watt ratings, 1 and