FACULTY PUBLICATIONS

Transcription

1 FACULTY PUBLICATIONS K. Rajasekhar, G. V. N. B. Prabhkar, Optimization of Biodiesel Blend Ratio For Compression Ignition Engine, International Journal in IT and Engineering (IJITE), Vol.03, Issue-04, April-2015, Pg: 70-77, ISSN: (UGC approved Journal) SyambabuNutalapati, Structural analysis of shock absorber by using ANSYS, International Journal of Engineering Research-Online a peer reviewed International Journal, Volume 3, Issue 6, DEC 2015,pp ,IJOER. (UGC approved Journal) Syambabunutalapati, D.Azad, G Swami Naidu, Structural analysis of friction clutch plate by changing fillet radius International Journal Of Engineering Research-online, vol.5., issue.1., 2017 January-February. (UGC approved Journal) SyambabuNutalapati, D Azad, G Swami Naidu, Effect of fluid pressure on impeller, International Journal of Engineering Research-online, vol.5, issue.2, 2017 march-april. (UGC approved Journal) Mr. Suresh JS, Dr. M. Pramila Devi, Mr. Rafi Md, Dr. C. Naga Bhaskar Processing, Mechanical Characterization and Topsis Ranking of Glass/Particulates Reinforced Epoxy Based Hybrid Composites in International Journal of Scientific Research, May (UGC approved Journal)

2 Other International journals Ch.Naveenkumar, R.VijayKrishna,A.Madhuri,K.Vidya, CFD Analysis of a Heat Pipe with Different Lengths and Various Wick Structures,International Journal of Engineering Trends and Technology (IJETT),Volume 32 Number 1, ISSN: , Pg:11-15,February 2016 Mr.R.Vijay Krishna, Dr.C.NagaBhaskar, Performance Analysis of Various Disc Brake Profiles, International Journal of Engineering Trends and Technology (IJETT),Volume 35 Number 5,ISSN: , Pg: , May 2016 KottetiSirisha, Dr.C.NagaBhaskar, Mr.R.Vijay Krishna, Modeling and Analysis of Heat Pipe in Drilling Applications,International Journal & Magazine of Engineering, Technology, Management and Research (IJMETMR),Volume 3, Issue No:9, ISSN No: ; Pg: , September 2016 S.Suresh, R.Vijay Krishna, C.NagaBhaskar, A.Madhuri, Performance Analysis of Phase Change Materials in Buildings by using ANSYS, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET),Volume 5, Issue No:9, ISSN (Online): , ISSN(Print): , Pg: , September 2016 K. Ravi, K. Vidya, Dr.C.NagaBhaskar, R.Vijay Krishna, Thermal and Static Analysis on a Ceramic Coated Diesel Engine Piston, International Journal of Scientific Engineering and Technology Research (IJSETR), Vol.05, Issue.29, ISSN , Pages: , Sep-2016 B.Hari Kumar, T.Rajendra Prasad, R.Vijay Krishna, Experimental

3 Investigation Of Thermal And Mechanical Characterization Of Glass Fiber Reinforced Epoxy Hybrid Composites With And Without Addition Of Mild Steel Scrap Powder, International Journal of Professional Engineering Studies (IJPRES),Volume 8,Issue 5, Pg: 60-72,JUN 2017 G.Purna Chandra Rao, Sk.AbdulAzeez, R.Vijay Krishna, Ch.Naveen Kumar, Performance & Evaluation of Diesel Engine (4-stroke 1-cylinder) using Jatropha Oil Blends with Super Charging Method, International Journal for Modern Trends in Science and Technology (IJMTST), Volume: 03, Issue No: 07, ISSN: ; Pg: 50-59, July 2017 B.Ramesh, A.Madhuri and R.Vijay Krishna, Experimental Investigation On 4- Stroke Single Cylinder Water Cooled Diesel Engine Using Ethyl Esters Of Sesame Oil Blends With Air Preheating, International Journal Of Innovative Research In Technology (IJIRT), Volume 4, Issue 2, ISSN: , Pg: 86-91, July 2017 S.Venkateswararao, P.Ravindra Kumar and P.Vijay Kumar Performance of air power engine powered with compressed air and engine exhaust gas, International journal of innovative research in technology (IJIRT)Volume 4, Issue 3,ISSN: ; Pg: 20-28, August 2017 D.Sreeramprasad, p.ghandhi, Geometrical Optimazation and analysis of crankshaft of automobile using FEA International journal of innovative research in technology (IJIRT)Volume 2, Issue 3,ISSN: ; Pg: 12-22, August Ch.Naveenkumar, G.S.R.NagaMalleswararao, Experimental investigation on4- stroke single cylinder Diesel engine by using Roselle seed oil as Bio- diesel international journal of engineering Treands and technology (IJETT), v43(3), January 2017, ISSN

4 K. Manipaul, G. V. N. B. Prabhkar, Computational and Thermal Analysis for Finding Heat Transfer Through an Annular Bend Tube For Various Nano Fluids International Journal Of Scientific Progress And Research (IJSPR), Volume 30, Number 01, 2016, ISSN: K. Rajasekhar, G. V. N. B. Prabhkar, Comparative Study of Performance of a Dual Fuel Compression Ignition Engine with LPG and Biodiesel. International Journal of Innovations in Engineering and Technology (IJIET), Volume 5, issue 01, Pg: , 2016, ISSN: G.V.N.B.Prabhkar, B.KiranBabu, K.Durga Prasad, Digital Twin and Triple Spark Ignition in FourStroke Internal Combustion Engines of Two Wheelers, International Journal of Innovations in Engineering and Technology (IJIET). Volume 4, Issue 4, December Pg: , ISSN: K. Rajasekhar, G. V. N. B. Prabhkar Exhaust Gas Analysis on Twin Cylinder Diesel Engine with Different Pure and Blended Fuels, International Journal Of Innovations In Engineering And Technology (IJIET), Volume 5, issue 01, Feb 2015, Pg: ISSN: T.manojkumar, G. V. N. B. Prabhkar, Modelling of S.I Engine single crank shaft with different materials subjected to thermal analysis, ISSN no: SyambabuNutalapati, Design and Analysis of Leaf Spring By Using Composite Material For Light Vehicles International Journal Of Mechanical Engineering And Technology (IJMET) volume 6, issue 12, DEC 2015, pp , article id: ijmet06_12_005 Syambabunutalapati,D.Azad, G Swami Naidu, Effect of welding current on welding speed and ultimate tensile strength (UTS) of mild steel International Journal Of Mechanical Engineering And Technology (IJMET) volume 7, issue

5 5, September October 2016, pp , article id: ijmet_07_05_018

6 Mohan Manoj Gupta,yerrapothudurgesh, Evaluation of mechanical properties of sludge rein forced composites JTASR, vol. 1, issue 04, Oct-Dec K.Nagaraju and Dr.K.Appa Rao Experimental Investigation On Diesel Engine Using Black Sesame Seed Oil August 2016, IJIRT, Volume 3 Issue 3, ISSN: Pg: KolagotlaVenkateswara Reddy, G.Diwakar, P.Ravikumar, Diagnosis of the unbalance by using shaft deflection measurement International Journal Of Advanced Research In Engineering & Management (IJAREM) vol. 01, Issue 09, December KolagotlaVenkateswarareddy, G.Diwakar, P.Ravikumar Diagnosis the unbalance in rotating overhanging disk by using FEA International Journal of Advanced Research in Engineering & Management (SRIJAREM), vol. 01, Issue 02, January 2016, 36. K. Srinivasa Rao, N.Sravani, N.V.Aravind Prasad, M.Sindhuja, D.Lohith, Precession of Surface Roughness by CNC End Milling,International Research Journal of Engineering and Technology (IRJET,Volume: 02, Issue: 03, June M.Sindhuja, Md.TouseefAhamad, Dr.P.C.Jain, P.Narendra Mohan, B.PurnaChandhraSekhar, Stress and Buckling based design for a hemispherical dome International Journal for Research in Applied Science & Engineering Technology (IJRASET)ISSN: ; IC Value: 45.98; SJ Impact Factor:6.887, Volume5,Issue VIII, August Ch.Naveenkumar, P.Vijay Kumar and K. Dilip Kumar, Simulation and CFD Analysis of Heat Pipe with Different Wick Geometry using CFX, International

7 Journal of Thermal Technologies E-ISSN , Accepted 25 July 2015, Available online 01 Sept 2015, Vol.5, No.3 (Sept 2015) Ch.Naveenkumar, R.Vijay Krishna, A.Madhuri, K.Vidya, CFD Analysis of a Heat Pipe with Different Lengths and Various Wick Structures International Journal of Engineering Trends and Technology (IJETT) Volume 32 Number 1- February CH.Naveenkumar, G.S.R.NagaMalleswar Rao, Experimental Investigation on 4-Stroke Single Cylinder Diesel Engine by Using Roselle Seed Oil as Bio- Diesel,International Journal of Engineering Trends and Technology (IJETT) Volume-43 Number-3 -January M.Ramu, B.Sobhanadri, and Ch.Naveenkumar, Fabrication and Experimental Analysis of a Vortex Tube Refrigeration system, October IJIRT Volume 3 Issue 5, ISSN: Y.Venkatesh, Ch. Naveenkumar and Md.Nazeer, Modelling And Analysis Of Composite Torpedo Propeller,International Journal Of Core Engineering & Management (IJCEM)Volume 3, Issue 3, June 2016, ISSN: G.Purna Chandra rao, Sk.AbdualAzeez, R.Vijay Krishna and Ch.Naveenkumar, Performance & Evolution of diesel engine (4-s,1-c) using Jatropha oil blends with super charging method International journal for modern trends in science and technology, Volume 3, Issue 7, July Sk. Abdul Azeez, B. Naveen kumar and Ch. Naveenkumar, Simulation And Thermal Analysis Of Copper Heat Pipe With Various Wick Structures Using CFX, International Journal Of Core Engineering & Management (IJCEM) Volume 2, Issue 9, December 2015, ISSN:

8 Prasad Rayala, S.ChakradarGoud, Parametric Optimization oftig Welding Using Taguchi Method.AIJREAS Volume 1, Issue 10(2016, October), ISSN A.Madhuri, Dr. P. Vijay Kumar and V. Dhanaraju, Simulation of a PCM based roof structure for thermal comfort in buildings using COMSOL software, International Journal of Core Engineering & Management (IJCEM) Volume 2, Issue 5, August ISSN: Ch.Naveenkumar, R.Vijay Krishna, A.Madhuri, K.Vidya, CFD Analysis of a Heat Pipe with Different Lengths and Various Wick Structures, International Journal of Engineering Trends and Technology (IJETT) Volume 32 Number 1- February S.Suresh, R.VijayKrishna, C.NagaBhaskar, and A.Madhuri, Performance Analysis of Phase Change Materials in Buildings by Using ANSYS, International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297: 2007 Certified Organization) Vol. 5, Issue 9, September 2016, ISSN (Online): ISSN (Print): G.LakshmiSujana, D.Pichaiah, and A.Madhuri, Performance & Emission Analysis of Mahua oil blends with Air preheating and supercharging on a CI- Engine, September 2016 IJIRT Volume 3 Issue 4, ISSN: S.Dass, B.Gangadhara Rao, K.Nasaraiah and A.Madhuri, Experimental Analysis of Kusum Seed Oil Blends with Diesel in Single Cylinder water cooled Diesel Engine, September 2016 IJIRT Volume 3 Issue 4 ISSN: B.Ramesh, A.Madhuri and R.Vijay Krishna, Experimental Investigation On 4- Stroke Single Cylinder Water Cooled Diesel Engine Using Ethyl Esters Of

9 Sesame Oil Blends With Air Preheating, July 2017 IJIRT Volume 4 Issue 2 ISSN: JitendraGummadi, G.Vijay Kumar, Gunti Rajesh Evaluation of Flexural Properties of Fly Ash Filled Polypropylene Composites International Journal of Modern Engineering Research (IJMER) Vol.2, Issue.4, July -Aug 2012 pp : BalaNagesh.Dukkipati,Suresh.J.S, JitendraGummadi TOPSIS Ranking of Epoxy Hybrid Composites International Journal of Engineering Science and Computing(IJESC), Vol.7, Issue.10, October-2017, ISSN: K. Prasada Rao and B.V. Appa Rao, Performance and emission characteristics of an indirect diesel injection engine fueled with Mahua methyl ester and methanol as an additive Biofuels,Volume-5, Number 4, pp: , Publisher-Taylor and Frances, (Indexed by Scopus). DOI: / K. Prasada Rao, B.V. Appa Rao and V. Rambabu Heat release rate and engine vibration correlation to investigate combustion propensity of an IDI engine run with biodiesel (MME) and methanol additive as an alternative to diesel fuel Biofuels,Volume-6, Number 1-2, pp: 45-54, Publisher-Taylor and Frances, (Indexed by Scopus) DOI: / K. Prasada Rao, K. Santa Rao and P. Govinda Rao Experimental Investigation on Performance and Emission Characteristics of a DI Diesel Engine Fuelled With Rice Bran Oil Methyl Ester and Methanol as an additive International Journal of Chem Tech Research, Volume-9, Number 3, pp: , Publisher- Sphinx Knowledge House, (Indexed by Scopus)

10 B.V. Narayana, Ch. Ratnam, R. Umamaheswara Rao and K. Prasada Rao Multi- Response Optimization of DI Diesel Engine Performance Parameters using Karanja Methyl Ester by Applying Taguchi based Principal Component Analysis (PCA) Biofuels, Volume-8, Number 1, pp: 49-57, Publisher- Taylor and Frances, (Indexed by Scopus) DOI: / K. Prasada Rao, T. Victor Babu, G. Anuradhaand B.V.Appa Rao IDI Diesel Engine Performance and Exhaust Emission analysis using Biodiesel with an Artificial Neural Network (ANN) Egyptian Journal of Petroleum, publisher- Elsevier-2016,Indexed by Scopus), T. Victor Babu, K. Prasada Rao, B.V. Appa Rao and Aditya. K Experimental investigation on combustion, emissions, performance and cylinder vibration analysis of an IDI engine with RBME along with Isopropanol as an additive Biofuels, Publisher-Taylor and Frances, (Indexed by Scopus) K. Prasada Rao and B.V.Appa Rao Experimental Investigation on Cylinder Vibration analysis, Combustion, Emission and Performance of an IDI Engine International Journal of Manufacturing, Materials and mechanical Engineering (IJMMME), Volume-7, Number 1, pp: DOI: /IJMMME , Publisher- IGI Global, (Indexed by ESCI (Web of Science) & Scopus). K. Prasada Rao and B.V.Appa Rao Parametric Optimization for Performance and Emissions of an IDI Engine with Mahua Biodiesel Egyptian Journal of Petroleum,publisher-Elsevier-2016, Indexed by Scopus)

11 K. Prasada Raoand VaraLakshmiReddi Performance Evaluation of Diesel Engine with Biodiesel along with additive for Replacing Diesel Fuel International Journal of Chemical Sciences, Volume-14, Number 4, pp: , Publisher-Sadguru Publications., (Indexed by Scopus) K. Prasada Raoand VaralakshmiReddi, Parametric Optimization for performance and emissions of DI diesel engine with Mahua biodiesel along with Diethyl ether as an additive, Biofuels, Publisher-Taylor and Frances, (Indexed by Scopus), (accepted). CH. Naveen Kumar and K. Prasada Rao Experimental Investigation on Performance and Emission Characteristics of a DI Diesel Engine Fuelled with Palm oil Methyl Ester and Methanol as an Additive International Journal of Engineering Trends and Technology (IJETT), Volume 26, Number 3, pp: , 2015, ISSN: K. Prasada Rao,V. Ram Babu, K Santa Rao and D Venkata Rao, Mobile Operated Lawnmower published in InternationalJournal of Mechanical Engineering and Robotics Research (IJMERR), Volume. 3, No. 4, 2014, ISSN D.Venkata Rao, K. Prasada Rao, S. Chiranjeeva Rao and R.Umamaheswara Rao, Design and Fabrication of Power generation System using Speed Breaker published in InternationalJournal ofcurrent Engineering and Technology, Volume 4, Number 4, pp: , 2014, E-ISSN , P-ISSN INPRESSCO. K. Prasada Rao, B. V. Appa Rao, Combustion and Emission Analysis of IDI- Diesel Engine operated with Neat Mahua Methyl Ester (MME) blended with Methanol as an Additive published in InternationalJournal of Engineering

12 Research and applications,volume. 3, Issue 6, pp: , 2013, ISSN: K. Prasada Rao, B. V. Appa Rao, Investigation on Emission Characteristics of an Indirect Diesel Injection (IDI) Engine Replacing Conventional Diesel with Mahua Methyl Ester (MME) Blended with Methanol as An Additive published in International Journal of Engineering Research & Technology (IJERT), Volume. 2 Issues 11, pp: , 2013, ISSN: S. Ravi Babu, K. Prasada Rao and P. Ramesh Babua, Performance Evaluation of an IC Engine in the Presence of a C-D Nozzle in the Air Intake Manifold published in International Journal of Current Engineering and Technology, Volume-3, No.4, pp: , 2013, ISSN K. Prasada Rao, R. UmaMaheswara Rao, S. Ravi Babu, Dr V. Rambabu, Optimization of Performance Parameters of a Diesel Engine fuelled with Biofuels published in International Journal of Thermal Technologies, Volume- 3, No.3, pp: 85-91, 2013, ISSN K. Prasada Rao, G. Anuradha, M. Anil Kumar, R. Umamaheswara Rao, The six sigma approach to reduce specific roll consumption in medium merchant & structural mill published in International Journal of Research in Engineering Science & Advanced Technology, Volume-2, Issue-1, pp: , 2013, ISSN: P. Ramesh Babu, K. Prasada Rao and B.V. Appa Rao The role of Oxygenated Fuel additive (DEE) along with Mahua Methyl Ester to Estimate analysis of DI- Diesel Engine published in International journal of thermal technologies, Volume 2, Number 1, pp , 2012, ISSN:

13 V. Rambabu, Dr. V.J.J.Prasad, K. Prasada Rao Performance and Emission Analysis of DI-Diesel Engine Using Neat Linseed Methyl Ester Along with Methanol as Dual Fuel Published in International Journal of Science and Advanced Technology, Volume-2, No 6, PP: 35-39, 2012, ISSN: Ramesh Babu. P, K.Prasad Rao, Dr.V.J.J.Prasad, Experimental studies on a DI -CI engine run with Mahua methyl ester injection and methanol carburetion published in International Journal of Earth Sciences and Engineering, 2012, ISSN: P.Bharathi,TummalapentaGouriLalitha Priyanka, G. Srinivasa Rao, BoggarapuNageswaraRao.``Optimum WEDM Process Parameters of SS304 Using Taguchi Method International Journal of Industrial and Manufacturing Systems (IJIMS) Engineering Volume 1, Issue 3, November 2016, Pages: Bharathi.P,Venkateswarlu. G, Davidson. M.J,Selvaraj. N,Venugopal. Analysis of Tube End Formability of AA 2024 Tubes Using FEM International Journal of Current Engineering and Technology,(IJCET) ISSN Vol.2,No.1 March-2012,pages: Dr.C. Naga Bhaskar and Dr. T. subrahmanyam, Axisymmetric, Submerged and Confined Turbulent Jet Impingement Heat Transfer in International journal of Turbo-physics and Heat transfer. Dr.C. Naga Bhaskar and Dr.T. subrahmanyam, Study of Fluid flow and Heat Transfer Effects of Jet Impingement on Moving Solid walls using CFD., in International Journal of Fluid mechanics. Suresh JS, Dr. M. Pramila Devi, Rafi Md.andDr.C. Naga Bhaskar Effect of Natural Fillers on Mechanical Properties of Epoxy-Glass Reinforced Hybrid

14 Composites and their Ranking by Topsis in International Journal of Engineering Sience and Computing, May2016. Mr. R. Vijaya Krishna, Dr.C. Naga Bhaskar, Performance Analysis of Various Disc Brake Profiles in International Journal of Engineering Trends and Technology (IJETT), May Mr. S. Suresh, Mr. R. Vijaya Krishna, Dr. C. Naga Bhaskar Performance Analysis of Phase Change Materials in Buildings by Using ANSYS in International Journal of Innovative Research in Sciences, Engineering and Technology, Vol. 5, Issue 9, Sep Ms. K. Sirisha, Dr. C. Naga Bhaskar, Mr. R. Vijaya Krishna Modelling and Analysis of Heat Pipe In Drilling Applications in International Journal and Magazine of Engineering, Technology, Management and Research, Vol. 3, Issue 9, Sep Mr. K. Ravi, Ms. K. Vidya, Dr. C. Naga Bhaskar Mr. R. Vijaya Krishna Thermal and Static Analysis on a Ceramic Coated Diesel Engine Piston, in International Journal of Scientific Engineering and Technology Research (IJSETR), SEP Ms. Y. Sai Saranya, Mr. Rafi Mohammed, Dr. C. Naga Bhaskar, Design and Optimization of Air Cooled Engine Cylinder Using Taguchi Technique in International Journal of Advanced Technology and Innovative Research (AJATIR), Sep