D4-225/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data

Size: px
Start display at page:

Download "D4-225/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data"

Transcription

1 VOLVO PENTA AQUAMATIC DUOPROP D4-2/DP Technical Data Engine designation D4-2 A Crankshaft power, kw (hp) 16 (2) Propeller shaft power, kw (hp) 18 (21) Engine speed, rpm 3 Displacement, l (in 3 ) 3.7 (224) Number of cylinders 4 Bore/stroke, mm (in.) 13/11 (4./4.33) Compression ratio 17.:1 Volvo Penta Duoprop drive DPH Ratio 1.96:1 Dry weight with DP, incl. prop. & PS, kg (lb) 644 (142) Rating R4* & R** Emission compliance IMO NOx, EU RCD, US EPA Tier 3 Technical data according to ISO 866. With fuel having an LHV of 427 kj/kg and density of 84 g/liter at 1 C (6 F). Merchant fuel may differ from this specification which will influence engine power output and fuel consumption. *RATING 4. For light planing craft in commercial operation **RATING. For pleasure craft applications, and can be used for high speed planing crafts in commercial applications kw Nm Liters/h 4 3 Power Crankshaft power Calculated propeller load exp Torque Torque measured at crankshaft Fuel consumption At calculated propeller load exp. 2. hp, metric kpm US gal/h

2 D4-2/DP Technical description: Engine block and head Cylinder block and cylinder head made of cast-iron Combined ladder frame and balance shafts 4-valve technology with hydraulic lash adjusters Double overhead camshafts Oil-cooled pistons with two compression rings and one oil scraper ring Integrated cylinder liners Replaceable valve seats Five-bearing crankshaft Rear-end transmission Engine mounting Flexible engine mounting Lubrication system Easily replaceable separate full-flow and bypass oil filter Seawater-cooled tubular oil cooler Fuel system Common rail fuel injection system Control unit for processing the injection Fine filter with water separator and alarm Air inlet and exhaust system Air filter with replaceable insert Crankcase gases vented into the air inlet Exhaust elbow or exhaust riser Freshwater-cooled turbocharger Loss of sea water alarm Cooling system Thermostatically regulated freshwater cooling Tubular heat exchanger with separate large volume expansion tank Coolant system prepared for hot water outlet Seawater strainer and easily accessible impeller pump Electrical system 12V two-pole electrical system 11A marine alternator with Zener-diodes to protect the system from peak voltage, and integrated charging regulator with battery sensor cable for maximum use of alternator Fuses with automatic reset Auxiliary stop button Instruments/control Complete instrumentation/display packages, including e-key, the electronic key from Volvo Penta. Digital Power Trim instrument with analog or digital reading Electronic shift and throttle Plug-in connections Drive Complete with transom shield, and installation components Max tilt angle (adjustable) Protective zinc anodes to prevent corrosion Built-in kick-up function to reduce possible damage, in the event the drive strikes an underwater object Electrical shifting performed by electronic actuator Power Trim with one-button operation in twin installation Fully integrated water inlet and exhaust system Isolated propellers to prevent corrosion Fully hydraulic power-assisted steering system Optional electronic steering prerequisite for Sterndrive Joystick. Twin installation only. Option U.S.C.G./MED (SOLAS) kit available. Dimensions D4-2/DP Not for installation 374 [14.7] 243 [9.6] 38 [1.] 1±6 [2±.2] [1.2] 363 [14.3] 83±8 [3.3±.3] 11 [4.3] 228 [9.] 91 [3.6] 2 [2.] 83 [32.9] 611 OPTION [24.1] 67 [23.9] 198 [7.8] 229 [9.] 461 [18.1] 784 [3.9] More information [11.3] [11.3] 789 [31.1] 846 [33.3] Contact your nearest Volvo Penta dealer for more information about Volvo Penta engines and optional equipment/accessories or go to IOS Android Not all models, standard equipment and accessories are available in all countries. All specifications are subject to change without notice. The engine illustrated may not be entirely identical to production standard engines. AB Volvo Penta SE-4 8 Göteborg, Sweden English AB Volvo Penta.

3 VOLVO PENTA AQUAMATIC DUOPROP D4-26/DP Technical Data Engine designation D4-26 A Crankshaft power, kw (hp) 191 (26) Propeller shaft power, kw (hp) 184 () Engine speed, rpm 3 Displacement, l (in 3 ) 3.7 (224) Number of cylinders 4 Bore/stroke, mm (in.) 13/11 (4./4.33) Compression ratio 17.:1 Volvo Penta Duoprop drive DPH Ratio 1.8:1 Dry weight with DP, incl. prop. & PS, kg (lb) 66 (14) Rating R* Emission compliance IMO NOx, EU RCD, US EPA Tier 3 Technical data according to ISO 866. With fuel having an LHV of 427 kj/kg and density of 84 g/liter at 1 C (6 F). Merchant fuel may differ from this specification which will influence engine power output and fuel consumption. *RATING. For pleasure craft applications, and can be used for high speed planing crafts in commercial applications kw Nm 6 4 Liters/h 4 Power Crankshaft power Calculated propeller load exp Torque Torque measured at crankshaft Fuel consumption At calculated propeller load exp. 2. hp, metric kpm 6 4 US gal/h

4 D4-26/DP Technical description: Engine block and head Cylinder block and cylinder head made of cast-iron Combined ladder frame and balance shafts 4-valve technology with hydraulic lash adjusters Double overhead camshafts Oil-cooled pistons with two compression rings and one oil scraper ring Integrated cylinder liners Replaceable valve seats Five-bearing crankshaft Rear-end transmission Engine mounting Flexible engine mounting Lubrication system Easily replaceable separate full-flow and bypass oil filter Seawater-cooled tubular oil cooler Fuel system Common rail fuel injection system Control unit for processing the injection Fine filter with water separator Air inlet and exhaust system Belt-driven compressor with silencer of absorption type on both inlet and output port Air filter with replaceable insert Crankcase gases vented into the air inlet Exhaust elbow or exhaust riser Freshwater-cooled turbocharger Loss of sea water alarm Cooling system Thermostatically regulated freshwater cooling Tubular heat exchanger with separate large volume expansion tank Coolant system prepared for hot water outlet Seawater strainer and easily accessible impeller pump Electrical system 12V two-pole electrical system 11A marine alternator with Zener-diodes to protect the system from peak voltage, and integrated charging regulator with battery sensor cable for maximum use of alternator Fuses with automatic reset Auxiliary stop button Instruments/control Complete instrumentation/display packages, including e-key, the electronic key from Volvo Penta. Digital Power Trim instrument with analog or digital reading Electronic shift and throttle Plug-in connectors Drive Complete with transom shield, and installation components Max tilt angle (adjustable) Protective zinc anodes to prevent corrosion Built-in kick-up function to reduce possible damage, in the event the drive strikes an underwater object Electrical shifting performed by electronic actuator Power Trim with one-button operation in twin installation Fully integrated water inlet and exhaust system Isolated propellers to prevent corrosion Fully hydraulic power-assisted steering system Optional electronic steering prerequisite for Sterndrive Joystick. Twin installation only. Option U.S.C.G./MED (SOLAS) kit available. Dimensions D4-26/DP Not for installation 374 [14.7] 243 [9.6] 38 [1.] 1±6 [2±.2] [1.2] 363 [14.3] 83±8 [3.3±.3] 11 [4.3] 228 [9.] 91 [3.6] 83 [32.9] 2 [2.] 67 [23.9] 611 OPTION [24.1] 198 [7.8] 229 [9.] 461 [18.1] 784 [3.9] More information [11.3] [11.3] Contact your nearest Volvo Penta dealer for more information about Volvo Penta engines and optional equipment/accessories or go to IOS 789 [31.1] 846 [33.3] Android Download the Volvo Penta dealer locator App for your IPhone or Android Not all models, standard equipment and accessories are available in all countries. All specifications are subject to change without notice. The engine illustrated may not be entirely identical to production standard engines. AB Volvo Penta SE-4 8 Göteborg, Sweden English AB Volvo Penta.

5 VOLVO PENTA AQUAMATIC DUOPROP D4-3/DP Technical Data Engine designation D4-3 A Crankshaft power, kw (hp) 221 (3) Propeller shaft power, kw (hp) 214 (291) Engine speed, rpm 3 Displacement, l (in 3 ) 3.7 (224) Number of cylinders 4 Bore/stroke, mm (in.) 13/11 (4.6/4.33) Compression ratio 17.:1 Volvo Penta Duoprop drive DPH Ratio 1.76:1 Dry weight with DP, incl. prop. & PS, kg (lb) 663 (2) Rating R* Emission compliance IMO NOx, EU RCD, US EPA Tier 3 Technical data according to ISO 866. With fuel having an LHV of 427 kj/kg and density of 84 g/liter at 1 C (6 F). Merchant fuel may differ from this specification which will influence engine power output and fuel consumption. kw Nm Liters/h 6 Power Crankshaft power Calculated propeller load exp Torque Torque measured at crankshaft Fuel consumption At calculated propeller load exp. 2. hp, metric kpm US gal/h 1 *RATING. For pleasure craft applications, and can be used for high speed planing crafts in commercial applications

6 D4-3/DP Technical description: Engine block and head Cylinder block and cylinder head made of cast-iron Combined ladder frame and balance shafts 4-valve technology with hydraulic lash adjusters Double overhead camshafts Oil-cooled pistons with two compression rings and one oil scraper ring Integrated cylinder liners Replaceable valve seats Five-bearing crankshaft Rear-end transmission Engine mounting Flexible engine mounting Lubrication system Easily replaceable separate full-flow and bypass oil filter Seawater-cooled tubular oil cooler Fuel system Common rail fuel injection system Control unit for processing the injection Fine filter with water separator Air inlet and exhaust system Air filter with replaceable insert Crankcase gases vented into the air inlet Exhaust elbow or exhaust riser Freshwater-cooled turbocharger Loss of sea water alarm Cooling system Thermostatically regulated freshwater cooling Tubular heat exchanger with separate large volume expansion tank Coolant system prepared for hot water outlet Seawater strainer and easily accessible impeller pump Electrical system 12V two-pole electrical system 11A marine alternator with Zener-diodes to protect the system from peak voltage, and integrated charging regulator with battery sensor cable for maximum use of alternator Fuses with automatic reset Auxiliary stop button Instruments/control Complete instrumentation/display packages, including e-key, the electronic key from Volvo Penta. Digital Power Trim instrument with analog or digital reading Electronic shift and throttle Plug-in connectors Drive Complete with transom shield, and installation components Max tilt angle (adjustable) Protective zinc anodes to prevent corrosion Built-in kick-up function to reduce possible damage, in the event the drive strikes an underwater object Electrical shifting performed by electronic actuator Power Trim with one-button operation in twin installation Fully integrated water inlet and exhaust system Isolated propellers to prevent corrosion Fully hydraulic power-assisted steering system Optional electronic steering prerequisite for Sterndrive Joystick. Twin installation only. Dimensions D4-3/DP Not for installation 374 [14.7] 243 [9.6] 38 [1.] 1±6 [2±.2] [1.2] 363 [14.3] 83±8 [3.3±.3] 11 [4.3] 228 [9.] 91 [3.6] 2 [2.] 83 [32.9] 67 [23.9] 611 OPTION [24.1] 198 [7.8] 229 [9.] 461 [18.1] 784 [3.9] More information [11.3] [11.3] 789 [31.1] 846 [33.3] Contact your local Volvo Penta dealer for more information regarding Volvo Penta engines and optional eguipment/accessories or visit IOS Android Download the Volvo Penta dealer locator App for your IPhone or Android Not all models, standard equipment and accessories are available in all countries. All specifications are subject to change without notice. The engine illustrated may not be entirely identical to production standard engines. AB Volvo Penta SE-4 8 Göteborg, Sweden English AB Volvo Penta.

D6-330/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data

D6-330/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data VOLVO PENTA AQUAMATIC DUOPROP D6-33/DP Technical Data Engine designation D6-33 A Crankshaft power, kw (hp) 243 (33) Propeller shaft power, kw (hp) 233 (317) Engine speed, rpm 35 Displacement, l (in 3 )

More information

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6 VOLVO PENTA INBOARD DIESEL D11-510 Technical Data Engine designation D11-510 No. of cylinders and configuration in-line 6 Method of operation 4-stroke, direct-injected, turbocharged diesel engine with

More information

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6 VOLVO PENTA INBOARD DIESEL D13-7 Technical Data Engine designation D13-7 No. of cylinders and configuration in-line 6 Method of operation 4-stroke, direct-injected, turbocharged diesel engine with charge

More information

CXO300. Technical Specification CXO300. coxmarine.com

CXO300. Technical Specification CXO300. coxmarine.com TYPE YEAR 2018 DIESEL OUTBOARD ENGINE Technical data Engine designation Crankshaft power, kw (hp) 252 (338) Propeller shaft power, kw (hp) 224 (300) Engine propping speed, rpm 3700-4000 Displacement, L

More information

engine range 2017 For sailboats and powerboats hp

engine range 2017 For sailboats and powerboats hp engine range 2017 For sailboats and powerboats 12 900 hp More performance, less emissions The Volvo Penta 12 900 hp engine range for leisure boats includes state-of-the-art propulsion systems with engines,

More information

VOLVO PENTA MARINE Leisure Engines

VOLVO PENTA MARINE Leisure Engines Valid from Recommended Retailprices 1/2017-2018 Compact Diesel Gearbox/drive Propellershaft- Crankshaft- RPM TYPE Stroke- Weight Price EURO Emission - Price EURO Model 1) 2) 8) D1-13 MS15L/A 8,6 / 11,8

More information

Yanmar type 4BY150 The Powerful Gem

Yanmar type 4BY150 The Powerful Gem Yanmar type 4BY15 The Powerful Gem Configuration Maximum output at crankshaft * Continuous rating output at crankshaft Displacement Bore x stroke Cylinders Combustion system Aspiration Starting system

More information

1012. The engine for construction equipment kw at min -1

1012. The engine for construction equipment kw at min -1 1012. The engine for construction equipment. 41-123 kw at 1500-2500 min -1... Engines with integrated cooling system These are the characteristics of the 1012: Modern water-cooled 4- and 6-cylinder in-line

More information

MD PRODUCT BULLETIN V8 500 VGT. Turbocharged Diesel Marine Propulsion System PRODUCT BULLETIN.

MD PRODUCT BULLETIN V8 500 VGT. Turbocharged Diesel Marine Propulsion System PRODUCT BULLETIN. V8 500 VGT Turbocharged Diesel Marine Propulsion System PRODUCT BULLETIN 1 V8 500 VGT Axis Drive INTRODUCTION Caudwell Marine Axis Drives are the world s most technologically advanced marine propulsion

More information

Mercury Diesel 6.7 L. L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications

Mercury Diesel 6.7 L. L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications Mercury Diesel 6.7 L L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications General Specifications Mercury Diesel 6.7 L L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications

More information

1013. The engine for construction.

1013. The engine for construction. 1013. The engine for construction. 63- kw at 1500-0 rpm Engines for exhaust emission step 2 These are the characteristics of the 1013: Modern water-cooled 4- and 6-cylinder in-line engines. Three separate

More information

Power for marine professionals. Product guide

Power for marine professionals. Product guide Power for marine professionals Product guide 2 At the leading edge in marine diesels Volvo Penta is a solid partner in providing marine power systems. The combined financial and technological resources

More information

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

General 4-stroke direct injected, turbocharged and aftercooled diesel engine General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression

More information

C280-8 MARINE PROPULSION

C280-8 MARINE PROPULSION C280-8 MARINE PROPULSION 3084 bhp (2300 bkw) 900 rpm SPECIFICATIONS Shown with Accessory Equipment In-Line 8, 4-Stroke-Cycle-Diesel Emissions.................. IMO/EPA Tier 2 Compliant Bore mm (in)...

More information

English

English With Volvo Penta engines on board, uncompromising standards are built into your ship. Our comprehensive product program with engine outputs ranging from 100 to 900 hp includes propulsion and auxiliary

More information

C MARINE PROPULSION

C MARINE PROPULSION C175-16 MARINE PROPULSION 2721-2948 m (2683-2907 b) 2001-2168 b SPECIFICATIONS Image shown may not reflect actual engine configuration STANDARD ENGINE EQUIPMENT Air Inlet System Corrosion-resistant aftercooler

More information

STEYR-MOTORS. Document Go to Page

STEYR-MOTORS. Document Go to Page STEYR-MOTORS Document Go to Page Chat with your boat 02 MO94K33-MO10K38 04 MO126K28 06 MO144M38-MO144V38 08 MO164M40 10 MO166K28 12 MO236K43 14 MO246K41 16 MO266K43 18 4Cyl Mercuriser bravo stern drive

More information

The engine company. The Engine for Construction Equipment ,9 kw hp at rpm

The engine company. The Engine for Construction Equipment ,9 kw hp at rpm The engine company. The Engine for Construction Equipment. 23 74,9 kw 31 100 hp at 1600 2800 rpm Engine description Type of cooling: Crankcase: Crankcase breather: Cylinder head: Valve arrangement/ Timing:

More information

Service Bulletin Group 17-9

Service Bulletin Group 17-9 00 Volvo Penta Drive Chesapeake, VA 220 USA 7-9 Gulf of Mexico Oil Spill, Affect on Engines and Drives All Marine Engines Binder: A,B,C Date: 05-200 Page: (5) Models Affected: All marine engines operated

More information

Marine Propulsion 3126

Marine Propulsion 3126 Marine Propulsion 3126 SPECIFICATIONS 22 bkw @ rpm bhp @ rpm Shown with Accessory Equipment STANDARD ENGINE EQUIPMENT Air Inlet System 12V air inlet heater, sea water aftercooler, air cleaner/fumes disposal,

More information

PRODUCT RANGE. Power for marine professionals

PRODUCT RANGE. Power for marine professionals PRODUCT RANGE Power for marine professionals AT THE LEADING EDGE IN MARINE DIESELS Volvo Penta is a solid partner in providing marine power systems. The combined financial and technological resources provided

More information

3516B SPECIFICATIONS. Lube System. gear type oil pump, gear type scavenge oil pump Dual Caterpillar A-III electronic engine control, Mounting System

3516B SPECIFICATIONS. Lube System. gear type oil pump, gear type scavenge oil pump Dual Caterpillar A-III electronic engine control, Mounting System 2840 mhp (2800 bhp) 2088 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 69.0 L (4,210.64 in 3 ) Rated Speed...1880 Bore... 170.0

More information

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2447 bhp) 1825 bkw

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2447 bhp) 1825 bkw 2482 mhp (2447 bhp) 1825 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 78.08 L (4,764.73 in 3 ) Rated Speed...1600 Bore... 170.0

More information

1013. The engine for construction equipment.

1013. The engine for construction equipment. 1013. The engine for construction equipment.... 63-190 kw at 1500-2300 min -1 Engines with integrated cooling system These are the characteristics of the 1013: Modern water-cooled 4- and 6-cylinder in-line

More information

1013ec. The engine for construction equipment.

1013ec. The engine for construction equipment. 1013ec. The engine for construction equipment. 92-235 kw at 2000-2300 rpm Engines with conventional cooling system. These are the characteristics of the 1013ec: Modern water-cooled 4- and 6-cylinder in-line

More information

PRODUCT GUIDE. Marine commercial engines, options and accessories

PRODUCT GUIDE. Marine commercial engines, options and accessories PRODUCT GUIDE Marine commercial engines, options and accessories This is Volvo Penta Volvo Penta is a world-leading supplier of engines and complete power systems for marine applications. Here you will

More information

1100 Series M250C Marine Propulsion Engine 186 kw ( rpm

1100 Series M250C Marine Propulsion Engine 186 kw ( rpm These are the latest addition to the common platform concept of 1106 Series diesel engines. Assembled on a new high technology production line, these ultra clean engines will provide a superior replacement

More information

The Most Efficient Technology for Auxiliary Power for Sail or Motor Vessels

The Most Efficient Technology for Auxiliary Power for Sail or Motor Vessels The Most Efficient Technology for Auxiliary Power for Sail or Motor Vessels The Most Efficient DC Generator for Hybrid Electric Propulsion for Mono-Hull and Multi-Hull Sailing Craft in the 9 to 15 meter

More information

3516B Offshore Generator Set

3516B Offshore Generator Set 3516B Offshore Generator Set 1285 ekw (1836 kva) 60 Hz (1200 rpm) Actual configuration may vary from displayed image CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... IMO Tier I Bore...

More information

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2200 bhp) 1641 bkw

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2200 bhp) 1641 bkw 2231 mhp (2200 bhp) 1641 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 69.06 L (4,214.3 in 3 ) Rated Speed...1800 Bore... 170.0

More information

3056 MARINE PROPULSION

3056 MARINE PROPULSION 056 MARINE PROPULSION 9 bkw (125 bhp) Image may not reflect actual engine SPECIFICATIONS I-6, -Stroke-Cycle-Diesel Bore... 100 mm (.9 in.) Stroke... 127 mm (5.0 in.) Displacement.................. 6 L

More information

6LY400 6LY MHP 440 MHP MARINE COMMON-RAIL ENGINES

6LY400 6LY MHP 440 MHP MARINE COMMON-RAIL ENGINES 6LY4 6LY44 4 MHP 44 MHP MARINE COMMON-RAIL ENGINES Specifications Configuration In-line 6-cylinder, 4-stroke, vertical, water-cooled diesel engine Maximum output at crankshaft *294 kw@33 rpm [4 mhp]@33

More information

C9 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 575 mhp (567 bhp)

C9 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 575 mhp (567 bhp) 575 mhp (567 bhp) 423 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO compliant Displacement... 8.82 L (538.23 in 3 ) Rated Speed...2500 Bore... 112.0

More information

3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1810 bhp) 1350 bkw

3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1810 bhp) 1350 bkw 1836 mhp (1810 bhp) 1350 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Compliant Displacement... 58.56 L (3,573.55 in 3 ) Rated Speed...1600 Bore...

More information

ENGINE PERFORMANCE CURVE M1-158 hp ( rpm

ENGINE PERFORMANCE CURVE M1-158 hp ( rpm Rating: ENGINE PERFORMANCE CURVE M1-158 hp (118 kw) @ 0 rpm PowerTech 6.8 L Engine Model: 6068TFM75 Application: Marine (Propeller Power is approximately 97% of Crankshaft Power) Power -- hp (kw) (179)

More information

3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2550 bhp) 1902 bkw

3512C MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2550 bhp) 1902 bkw 2586 mhp (2550 bhp) 1902 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Compliant Displacement... 58.56 L (3,573.55 in 3 ) Rated Speed...1800 Bore...

More information

Engine Diagrams

Engine Diagrams 100-002 Engine Diagrams Engine Views The illustrations that follow show the locations of the major external engine components, the filters, and other service and maintenance points. Some external components

More information

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE Manufacturer: Engine Family: Certificate Number: AB VOLVO

More information

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

General 4-stroke direct injected, turbocharged and aftercooled diesel engine D11B-A (R-51IB) 5 General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front

More information

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

General 4-stroke direct injected, turbocharged and aftercooled diesel engine D11B3-A (R-625IB) 5 General -stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front

More information

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

General 4-stroke direct injected, turbocharged and aftercooled diesel engine General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression

More information

CHOOSE THE CORRECT PROPELLER

CHOOSE THE CORRECT PROPELLER CHOOSE THE CORRECT PROPELLER A correct choice of propeller is absolutely vital to get the most out of the engine and drive. Their performance decides whether the power produced is turned into boat performance

More information

C32 ACERT MARINE PROPULSION

C32 ACERT MARINE PROPULSION 1470-1925 m (1450-1900 b) 1081-1417 b s for Pleasure Craft Applications C32 ACERT Heat Exchanger Cooled Image shown may not reflect actual engine SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions.................

More information

Marine Propulsion Engines

Marine Propulsion Engines Marine Propulsion Engines Commercial / Military a Division of MD Group Content Introduction...3 Features Unique To Marinediesel s Engine Design...4 Engine Reference Table...5 MD170...6 MD200...7 MD250...8

More information

1100 Series. Marine Propulsion Engine M250C and M300C. Powered by Your Needs

1100 Series. Marine Propulsion Engine M250C and M300C. Powered by Your Needs 1100 Series Marine Propulsion Engine M250C and M300C These are the latest addition to the common platform concept of 1100 Series diesel engines. Assembled on a new high technology production line, these

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D7.3L DI LD / D7.3L D-Tronic (Mercury MerCruiser D7.3L LD D-Tronic and D7.3L

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L 230 (4.2 MS 230 and 4.2 MI 230 Model) IMPORTANT: To comply with regulations

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L IDI (Mercury MerCruiser D4.2L Model) IMPORTANT: To comply with regulations

More information

Diesels. Preliminary Information 10/2000 TAKING THE WORLD OF WATER BY STORM. THE NEW D1.7L DTI DIESEL EFFECTIVE OCT 2000

Diesels. Preliminary Information 10/2000 TAKING THE WORLD OF WATER BY STORM. THE NEW D1.7L DTI DIESEL EFFECTIVE OCT 2000 Diesels Preliminary Information 10/2000 EFFECTIVE OCT 2000 THE NEW D1.7L DTI DIESEL TAKING THE WORLD OF WATER BY STORM. LIGHT-YEARS AHEAD. SO YOU CAN LEAVE YOUR WORRIES BEHIND. Heart-thumping acceleration

More information

ENGINE PERFORMANCE CURVE M3-135 hp ( rpm M2-120 hp ( rpm

ENGINE PERFORMANCE CURVE M3-135 hp ( rpm M2-120 hp ( rpm Rating: Application: ENGINE PERFORMANCE CURVE M3-135 hp (11 kw) @ 25 rpm M2-12 hp (9 kw) @ rpm Marine POWERTECH.5 L Engine Model: 5TFM5 [Option 16HP / 16HQ]* (179) 339 lb-ft (6 N m) (52) 32 (3) (1) Torque

More information

PRODUCT RANGE. Power for marine professionals

PRODUCT RANGE. Power for marine professionals PRODUCT RANGE Power for marine professionals AT TE EADING EDGE IN MARINE DIESES Volvo Penta is a solid partner in providing marine power systems. The combined financial and technological resources provided

More information

MARINE C18 SPECIFICATIONS. Lube System. service, oil level gauge - RH or LH service, oil filler, Cooling System

MARINE C18 SPECIFICATIONS. Lube System. service, oil level gauge - RH or LH service, oil filler, Cooling System 486 mhp (479 bhp) 357 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Displacement... 18.1 L (1106 cu in) Rated Speed...1800 Bore... 145.0 mm (5.7 in) Stroke... 183.0 mm

More information

Designed for productivity. High-performance propulsion

Designed for productivity. High-performance propulsion Designed for productivity High-performance propulsion An inclusive offer to marine professionals A service vessel on its way to repair a malfunctioning wind power station, a marine ambulance rescue operation

More information

Benefits of Next Generation Gas Engines. Reasons to Buy Volvo Penta

Benefits of Next Generation Gas Engines. Reasons to Buy Volvo Penta Introduction Benefits of Next Generation Gas Engines Performance Reasons to Buy Volvo Penta Testimonials Powerful Efficient Reliable and More V8 5.3L Allows us to leverage: World class engineering Automotive

More information

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE Manufacturer: Engine Family: Certificate Number: AB VOLVO

More information

C18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm

C18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1

More information

Hydra Drive. The HYDRA DRIVE diesel line-up. All the turnkey pleasure and reliability from Yamaha but inside.

Hydra Drive. The HYDRA DRIVE diesel line-up. All the turnkey pleasure and reliability from Yamaha but inside. Hydra Drive Diesel Hydra Drive The HYDRA DRIVE diesel line-up. All the turnkey pleasure and reliability from Yamaha but inside. Welcome to the world of YAMAHA, where unmatched experience in the manufacture

More information

C12 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 715 mhp (705 bhp) 526 bkw

C12 ACERT MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 715 mhp (705 bhp) 526 bkw 715 mhp (705 bhp) 526 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 11.95 L (729.23 in 3 ) Rated Speed... 2300 Bore... 130.0 mm (5.12

More information

C18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm

C18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1

More information

Bore 145 mm 5.71 in Stroke 162 mm 6.38 in Displacement 32.1 L in 3 Twin Turbocharged-Aftercooled (TTA) Compression Ratio 15.0:1 67.

Bore 145 mm 5.71 in Stroke 162 mm 6.38 in Displacement 32.1 L in 3 Twin Turbocharged-Aftercooled (TTA) Compression Ratio 15.0:1 67. EU Locomotive Stage IIIB 89-895 bkw/5-00 bhp @ 800 rpm Image shown may not reflect actual configuration Specifications Cat C ACERT Metric Imperial (English) Configuration V-, 4-Stroke-Cycle Diesel Bore

More information

INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES Base Engine MR706L Cummins MerCruiser

More information

3512B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1360 bhp)

3512B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (1360 bhp) 1379 mhp (1360 bhp) 1014 bkw Image shown may not reflect actual SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 51.8 L (3,160.84 cu. in) Rated Speed...1600 Bore... 170.0 mm (6.69

More information

Power Rating Minimum Power 218 bkw 292 bhp Maximum Power 359 bkw 482 bhp mm (5.4 in) mm (6.5 in)

Power Rating Minimum Power 218 bkw 292 bhp Maximum Power 359 bkw 482 bhp mm (5.4 in) mm (6.5 in) The Cat 3406C Diesel Fire Pump Engine is offered in ratings ranging from 218-359 bkw (292-482 bhp) @ 1750-2300 rpm. These ratings are non-certified and available for global non-regulated areas. They are

More information

C32 ACERT MARINE AUXILIARY/ GENERATOR SET

C32 ACERT MARINE AUXILIARY/ GENERATOR SET C32 ACERT MARINE AUXILIARY/ GENERATOR SET 590-994 b (791-1333 b) C32 ACERT Keel Cooled Marine Auxiliary/ Generator Set Images shown may not reflect actual engines SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel

More information

CONTINUOUS 3520 ekw 4400 kva 50 Hz 1000 rpm

CONTINUOUS 3520 ekw 4400 kva 50 Hz 1000 rpm DIESEL GENERATOR SET CONTINUOUS 3520 ekw 4400 kva Image shown may not reflect actual package Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched

More information

HIGH-PERFORMANCE PROPULSION FOR MARINE PROFESSIONALS. High Performance

HIGH-PERFORMANCE PROPULSION FOR MARINE PROFESSIONALS. High Performance HIGH-PERFORMANCE PROPULSION FOR MARINE PROFESSIONALS High Performance 1 WHEN TIME IS TIGHT A service vessel on its way to repair a malfunctioning wind power station, a marine ambulance racing to assist

More information

MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 375 mhp (370 bhp)

MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 375 mhp (370 bhp) 375 mhp (370 bhp) 276 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 7.2 L (442 cu in) Rated Speed...2600 Bore... 110 mm (4.33 in) Stroke...

More information

PRIME 3880 ekw 4850 kva 50 Hz 1000 rpm

PRIME 3880 ekw 4850 kva 50 Hz 1000 rpm DIESEL GENERATOR SET PRIME 3880 ekw 4850 kva Image shown may not reflect actual package Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched flexibility,

More information

C15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm

C15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...18.0:1

More information

C11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm

C11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...140.0 mm (5.51 in) Displacement... 11.1 L (677.36 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.2:1

More information

C13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm

C13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...157.0 mm (6.18 in) Displacement... 12.5 L (762.8 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.3:1

More information

VOLVO PENTA GENSET ENGINE TAD531GE

VOLVO PENTA GENSET ENGINE TAD531GE VOLVO PENTA GENSET ENGINE TAD531GE 1500 rpm, 102 kw (139 hp) 1800 rpm 111 kw (151 hp) The TAD531GE is a powerful, reliable and economical Generating Set Diesel Engine. Durability & low noise Designed for

More information

MAN Diesel & Turbo. Main Engine Room Data. Project name BrasNave 25 Project type Project number 3 Date 2010 Yard

MAN Diesel & Turbo. Main Engine Room Data. Project name BrasNave 25 Project type Project number 3 Date 2010 Yard MAN Diesel & Turbo Main Engine Room Data Main Engine Compliance 6S80MC6.1-TI IMO-NOx Tier I Project name BrasNave 25 Project type Project number 3 Date 2010 Yard Country Brasil Made by BrasNave Department

More information

C9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

C9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.1:1

More information

MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 320 mhp (315 bhp) 235 bkw

MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT. 320 mhp (315 bhp) 235 bkw 320 mhp (315 bhp) 235 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions...IMO Displacement... 7.2 L (442 cu in) Rated Speed...2400 Bore... 110 mm (4.33 in) Stroke...

More information

C15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm

C15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

MARINE ENGINE PERFORMANCE DATA [T2P PREFIX]

MARINE ENGINE PERFORMANCE DATA [T2P PREFIX] MARINE PERFORMANCE DATA [T2P PREFIX] Sales Model: C18 DITA Combustion: DI Aspr: TA Engine Power: 715 HP Speed: 2,100 After Cooler: SWAC Manifold Type: W/C Governor Type: After Cooler Temp(F): -- Turbo

More information

FOR MARINE APPLICATIONS

FOR MARINE APPLICATIONS NEF 100 N45 MNA M10 FOR MARINE APPLICATIONS 4 CYLINDERS IN LINE - DIESEL CYCLE 74 kw (100 CV) @ 2800 rpm (A1) 66.5 kw (90 CV) @ 2800 rpm (B) 63 kw (85 CV) @ 2800 rpm (C) 63 kw (85 CV) @ 2800 rpm (D) T

More information

STANDBY 2860 ekw 3575 kva 50 Hz 1000 rpm

STANDBY 2860 ekw 3575 kva 50 Hz 1000 rpm DIESEL GENERATOR SET STANDBY 2860 ekw 3575 kva Image shown may not reflect actual package Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched flexibility,

More information

C9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm

C9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

2013. The engine for agricultural equipment kw at 2100 rpm

2013. The engine for agricultural equipment kw at 2100 rpm 2013. The engine for agricultural equipment. 81-118 kw at 2100 rpm... These are the characteristics of the 2013: Modern water-cooled 6-cylinder in-line engines. Turbocharging and turbocharging with charge

More information

MARINE ILLUSTRATED PARTS MANUAL

MARINE ILLUSTRATED PARTS MANUAL MARINE ILLUSTRATED PARTS MANUAL MODEL MP454 XLi SERIAL NUMBER 101810 THRU 103880 MODEL MP7.4L SERIAL NUMBER 103538 AND ABOVE L510008 10/01 This Page Was Intentially Left Blank Contents: MODEL MP7.4L PARTS

More information

STEYR MONOBLOCK DIESEL MARINE ENGINE SERIES

STEYR MONOBLOCK DIESEL MARINE ENGINE SERIES STEYR MONOBLOCK DIESEL MARINE ENGINE SERIES WHY TO CHOOSE The STEYR MONOBLOCK engine family consists of several design solutions which are the key for highest power density, reliability and safety in operation

More information

General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel

General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the

More information

: see performance curve rev. A : suction 900 mm / discharge 700 mm

: see performance curve rev. A : suction 900 mm / discharge 700 mm PUMPUNIT HK700 PUMP General The HK pump is a single-stage mixed-flow centrifugal pump for lifting large quantities of water to medium heads. The pump is suitable for heavily contaminated and unpurified

More information

Engine for Industrial Applications kw hp at 2600 min -1 rpm EU Stage III B / US EPA Tier 4 interim

Engine for Industrial Applications kw hp at 2600 min -1 rpm EU Stage III B / US EPA Tier 4 interim Engine for Industrial Applications 28-55.9 kw 38-75 hp at 2600 min -1 rpm EU Stage III B / US EPA Tier 4 interim 4 cylinder in-line engines turbocharged, with or without charge air cooler Water-cooled

More information

Volvo Penta Aq131 Marine Engine File Type

Volvo Penta Aq131 Marine Engine File Type We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with volvo penta aq131 marine

More information

Parts Book. VGT series engine

Parts Book. VGT series engine Parts Book VGT series engine Rev 2.2 AUG 2017 1 Dear customer In this catalog you will find all the components that your Marinediesel VGT-engine is constructed of. We have listed a couple of tips that

More information

C7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm

C7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation

More information

for Power Generation Continuous/Prime/Peak Applications with air-to-air charge air cooling

for Power Generation Continuous/Prime/Peak Applications with air-to-air charge air cooling Gendrive Series 1600 Gx0 for Power Generation Continuous/Prime/Peak Applications with air-to-air charge air cooling Dimensions and Masses Engine Dimensions (LxWxH) mm (in) Mass, dry kg (lbs) 10V 1598 x

More information

C18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air

C18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air 560 mhp (553 bhp) 412 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO/EPA Tier 2 Displacement... 18.1 L (1106 cu in) Rated Speed...2100 Bore... 145.0 mm

More information

USCG ACCEPTED LIFEBOAT/RESCUE BOAT ENGINES

USCG ACCEPTED LIFEBOAT/RESCUE BOAT ENGINES USCG ACCEPTED LIFEBOAT/RESCUE BOAT ENGINES Accepted SOLAS Lifeboat/Rescue Boat Inboard Diesel Engines meeting US EPA Nonroad Compression-Ignition Engine Exhaust Emission Standards by Model Year 2014 or

More information

General Installation Factors Affecting Engine Performance Engine Installation... 8

General Installation Factors Affecting Engine Performance Engine Installation... 8 General... 1 Recreational... 1 Commercial... 1 Emissions Certification... 1 Application and Installation Resources... 2 Design To Order (DTO)... 2 Product Identification Information... 3 Model Views...

More information

C18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air

C18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air 460 mhp (454 bhp) 339 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO/EPA Tier 2 Displacement... 18.1 L (1106 cu in) Rated Speed...1800 Bore... 145.0 mm

More information

CLEAN. QUIET. Powerful. y o u r b e s t b o a t i n g. e v e r.

CLEAN. QUIET. Powerful. y o u r b e s t b o a t i n g. e v e r. PRODUCT GUIDE POWERBOAT 2007 2008 CLEAN. QUIET. Powerful. y o u r b e s t b o a t i n g. e v e r. We just don t like to compromise. And since we both care for the environment and love boating, we had

More information

C7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

C7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation

More information

Guascor MARINE DIESEL

Guascor MARINE DIESEL Guascor MARINE DIESEL ENGINES AND SYSTEMS 1. POWER DEFINITION Dresser-Rand s Guascor diesel engines ratings stated in this document are based in ISO3046-1:2002(E), ISO3046-3:2006(E), ISO15550:2002(E).

More information

CALIFORNIA Proposition 65 Warning:

CALIFORNIA Proposition 65 Warning: PARTS MANUAL P1064 For Models: L1064D, L1064A, M1064D, M1064T1, M1064T2, M1064A, M1064H, NL1064D, NL1064T1, NL1064T2, NL1064H1, NL1064H2, M40C2, M55C2, & M65C2 CALIFORNIA Proposition 65 Warning: Diesel

More information

Technical Specification

Technical Specification Technical Specification including performance data Project 3 x 9CM25 rev 2. consisting of 3 Caterpillar Diesel Generator sets Type 9CM25 with site output of: 2475 bkw at each engine flywheel rated 750

More information

C7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm

C7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1

More information