3000 psi (207 bar) Output/ min. 115 VAC 10cc (0.61 cu. in.) 24 VDC 12cc (0.73 cu. in.) Discharge Element Output Port.
|
|
- Reynard Heath
- 5 years ago
- Views:
Transcription
1 MultiPort Lubricator Grease, Injector General The MultiPort Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with injector systems. The unit includes two pumping elements for a distribution network of injectors. These lubricators are available in 115 VAC or 2 VDC versions which make them ideal for use in industrial applications. Use of a remote timer/controller (SMAC/SMDC) or customer PLC is required for this lubricator. Operation Power supplied to a motor with gear box drives a precision eccentric cam which engages with two spring load piston elements. This action creates a suction and pressure stroke of the element(s), thereby displacing a fixed volume of lubricant through an outlet check valve. Lubricant is discharged through main line tubing to a series of injectors and on to multiple lubrication points. The lubricator also includes a solenoid operated vent valve which relieves mainline pressure when the pump motor stops, allowing injectors to reset for the next cycle. Features + Compact rugged design + Minimal maintenance required + High pressure capabilities + Follower in reservoir assures grease delivery to inlet of pump elements + Low level switch psi unit for CXL2/FL Injectors Refer to the following datasheets: + Datasheet #6911: SMDC Controller + Datasheet #6912: SMAC Controller + Datasheet #582: CXL2 Injectors + Catalog # 1 FL Injectors Technical Data Lubricator Reservoir Capacity 2, & 8 liter (, 8 & 16 lb) Grease NLGI grade Maximum Working Pressure 000 psi (207 bar) Output/ min. 115 VAC 10cc (0.61 cu. in.) 2 VDC 12cc (0.7 cu. in.) Discharge Element Output Port 1/" NPT(F) Operating Temperature Range 5 F to 122 F (-15 C to 50 C ) Operating Voltage 115 VAC, 2 VDC Motor As noted below Fill Connection Quick disconnect Motor IP Enclosure Rating Voltage Amperage IP VAC 1.8 FLA 2 VDC 2 FLA 1
2 How To Order Name Reservoir Capacity Voltage Relief Pressure Part # MultiPort Injector Lubricator liter (8 lb) 115 VAC 000 psi liter (16 lb) 115 VAC 000 psi liter ( lb) 2 VDC 000 psi 7962 liter (8 lb) 2 VDC 000 psi 771 When ordering, specify by name, reservoir capacity, voltage, and part number, e.g. MultiPort Injector Lubricator, liter (8 lb) reservoir, 2 VDC, Part #771. Accessories Description Part # Pressure gauge (5000 psi, 1/ NPT, LM) U902F Service Parts 115 VAC Item Description Part # Qty. 1 Nut Washer Tie rod: for liter (8 lb) Tie rod: for 8 liter (16 lb) Reservoir: liter (8 lb) Reservoir: 8 liter (16 lb) O-ring Low level switch Motor (115 VAC) & worm gear Standard pump element 2280* Copper seal Copper seal Cartridge Valve Coil 115 VAC 77 1 * Copper seal part # (x1) & (x2) required for installation
3 Service Parts 2 VDC Item Description Part # Qty. 1 Nut Washer Tie rod: for 2 liter ( lb) Tie rod: for liter (8 lb) Reservoir: 2 liter ( lb) Reservoir: liter (8 lb) O-ring Low level switch Washer Motor cover screw Motor cover (bottom) Motor cover (top) Motor (2 VDC) & worm gear 12 Standard pump element 2280* 2 1 Copper seal Copper seal Cartridge Valve Coil 2 VDC * Copper seal part # (x1) & (x2) required for installation
4 Dimensional Schematics 115 VAC Measurements shown in millimeters. Lube Outlet Mounting Holes Ø9mm(x2) 5 H1 H2 265 Reference H1 H2 liter 75 8 liter 55 67
5 Dimensional Schematics 2 VDC Measurements shown in millimeters. Lube Outlet Mounting Holes Ø9mm(x2) 5 H1 H2 265 Reference H1 H2 2 liter liter 77 5
6 Wiring 115 VAC 2 VDC Level Switch 05 Wiring (COM) 1 2 (NC) (NO) Normally closed terminal (NC) Normally open terminal (NO) Common terminal (COM) (protective cover removed) 6
MultiPort II Lubricator
MultiPort II Lubricator Mobile, PDI, Grease General The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with positive displacement injector(pdi)
More informationMultiPort II Lubricator
MultiPort II Lubricator Mobile, Progressive, Grease General The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with progressive divider valve
More informationMultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R3 09/09
MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed output pumping elements to discharge grease
More informationMultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R6 08/17
MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to
More informationMultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R8 08/18
MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to
More informationCXL2 Injectors & Manifolds
CXL2 Injectors & Manifolds Premium Single Line Grease Systems General Designed for use in single line high pressure automatic grease systems, CXL2 Injectors deliver precise volumes of lubricant at predetermined
More informationFill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer)
GPO ubricator Motor-driven gear pump, Oil General The GPO ubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors
More informationOperators Manual TTN LUBRICATOR Series Progressive r#9
Operators Manual TTN LUBRICATOR Series Progressive 5580 r#9 Contents Precautions & Symbols... Manufacturer s Statement... General... Application... TTN Lubricator at a Glance... Technical Data...4 ISO
More informationCLP - Cartridge Lube Pump
General The Cartridge Lube Pump is an electrically driven, single outlet, pump designed for use with the universal grease cartridges widely available in industry today. The lubricator is available with
More informationSureFire II Lubricator
SureFire II Lubricator Automatic, Oil & Fluid Grease, Single Phase General The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements
More informationLubePro Series Pumps For Simple, Injector-based Automatic Lubrication Systems
LubePro Series Pumps For Simple, Injector-based Automatic Lubrication Systems The Choice of Lubrication Professionals. As a hard-working professional focused on ensuring your production lines keep moving
More information400 psi (28 bar) PDI & INJ. 100 psi (7 bar) PDI & INJ
Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is
More informationSeries 3000 Divider Valve Manifold
Series 3000 Divider Valve Manifold Progressive Systems General The Series 3000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points. A typical divider
More informationAirmatic Lubricator. Pneumatic Operation, Oil. General. Application. Operation. Technical Data
Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is
More informationFZ-A Lubricator. Electric, Oil & Grease. General. Application. Operation. Features. Adjustment of Discharge Rate R2 03/09
FZ- Lubricator Electric, Oil & Grease General The FZ- Lubricator is primarily designed for direct feed applications for servicing up to 12 lubrication points. The lubricators are supplied with pump bodies
More informationElectric grease pump series L-EGP 230VAC / 400VAC
Electric grease pump series L-EGP / 400VAC The series L-EGP are electric driven grease pumps Activation and deactivation takes place via an external control unit. Reservoir made of transparent plastic
More informationGrease and Oil Injectors
Grease and Oil Injectors LIT099 AL-32 Grease Injector OVERVIEW The AL-32 Grease Injectors are designed for single line, high-pressure centralized lubrication systems. These injectors are available in
More informationOperators Manual Electric Barrel Pump r#0
Operators Manual Electric Barrel Pump 36915 r#0 Contents General Data & Features...Page 2 Operation...Page 3 Technical Data...Page 3 How to Order...Page 4 Service Parts...Page 5 Exploded View...Page 6
More informationUse Type C control units. Viscosity range is 100 to 10,000 SSU at operating temperature. See Bijur Engineering Manual for system limitations.
V5W Lubricator Automatic Continuous Operation The V5W Lubricator consists of a motor-driven gear pump, with a controlled bypass valve. (constant volume or constant pressure models) The fully automatic
More informationPumping Ratio 50:1. ( bar) Max. Output 7500 psi. Air Inlet. Material Outlet. Airmotor Bore Dia. 3 in. (76.2 mm) Stroke
3" and 4.25" Grease Pumps Specifications 5:1 3" Grease Pump Specifications / Performance Testing Pumping Ratio 5:1 Air Pressure 4-15 psi (2.7-1.3 bar) Max. Output 75 psi Pressure (517 bar) Air Inlet 3
More informationLubemaster Pump DESCRIPTION
Lubemaster Pump DESCRIPTION The Trabon Lubemaster is a rugged, reliable pump for use with Trabon Series Flo divider valves to lubricate all types of machinery. It can be driven by an electric motor or
More informationLubePro Series Pumps. For Simple, Injector-Based Automatic Lubrication Systems. The Choice of Lubrication Professionals
LubePro Series Pumps For Simple, Injector-Based Automatic Lubrication Systems The Choice of Lubrication Professionals As a hard-working professional focused on ensuring your production lines keep moving
More informationOil Streak Air-Oil Generating Unit
Oil Streak Air-Oil Generating Unit GENERAL The Air-Oil Generating system delivers high efficiency lubrication for high-speed spindles and other applications requiring accurate oil deliveries, in combination
More informationOperators Manual SUREFIRE II Single Phase PDI - SLR (24VDC, 115VAC & 230VAC) r#3
Operators Manual SUREFIRE II Single Phase PDI - SLR (24VDC, 115VAC & 230VAC) 36412 r#3 Contents Precautions & Symbols...2 Manufacturer s Statement...2 General...2 Features...2 Operation...3-4 Technical
More informationQLS 321 SOLUTIONS. Compact and Rugged Easy to Install and Use Multiple Standard Features. Quicklub Lubrication Systems.
THE LATEST PRODUCTS AND NEWS FOR LINCOLN CUSTOMERS SOLUTIONS APRIL 2001 VOL. 3, NO. 2 A New Addition To Our Line of Powerful Quicklub Lubrication Systems In This Issue: QLS 321 Compact and Rugged Easy
More informationZEM Injector. Series 32, 33, 34, 35, 39. General. Operation. Features. Technical Data. Injector Outputs R2 08/10
ZEM Series 32, 33, 34, 35, 39 General The ZEM Series injector line are positive displacement injectors (PDI) that deliver precise and controlled lubrication outputs which meet exact requirements for diverse
More informationHydraulic pump HP-1. Type 1. Type 2
The BEKA-MAX central lubrication pump model HP-1 is hydraulic actuated and has up to a maximum of independently operating lubricant outlets. A separate pump unit is required for each outlet. Three pump
More informationSeries 1000 Divider Valve Manifold
Series 1000 Divider Valve Manifold Progressive Systems General The Series 1000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points. A typical divider
More informationSureFire II Lubricator
SureFire II Lubricator Automatic, Oil & Fluid Grease, Three Phase General The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements
More informationA system of lubricant dispensing devices (oil or grease) connected by piping to a central pumping unit that is operated automatically or manually.
Air/Oil Systems: A lubrication system in which small measured quantities of oil are introduced into an air/oil mixing device which is connected to a lube line that terminates at a bearing, or other lubrication
More informationGrease Jockey On-Road Lubrication Solutions. Time-tested lubrication equipment with you for the long haul.
Grease Jockey On-Road Lubrication Solutions Time-tested lubrication equipment with you for the long haul. About Graco Since 1926, Graco remains proud to offer best-in-class industrial fluid handling equipment.
More informationHand Operated Hydraulic Pumps PHP121DAH65 PHP121DA95. Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions HP Specifications: Volume Displacement HP22SA 0.20 in3 (3.3 cm3) (When handle is pulled). HP61DA 0.60 in3 (9.8 cm3) per full cycle. HP121DA 1.20 in3 (19.7 cm3) per
More informationFeatures and Benefits
AutoLube-BTX Since 1919, Alemite has been supplying innovative products to meet the growing needs of a competitive lubrication industry. Through dedication to quality, dependability and customer satisfaction,
More informationCentro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
More informationAn IMCI Company EXACTOSERVE COMPONENTS PUMPS, INJECTORS, CONTROLLERS BULLETIN 414
n IMCI Company EXCTOSERVE COMPONENTS PUMPS, INJECTORS, CONTROLLERS BULLETIN 414 Contents Introduction... 2-4. Grease Injectors... 5-8 Oil Injectors...9-12 Injector ccessories... 13-15 Manual Grease Pumps...
More informationYour machinery deserves genuine Bijur parts.
Your machinery deserves genuine Bijur parts. For over 80 years, Bijur has manufactured and supplied the best parts and components for lubrication applications. With over 10,000 parts, you know we have
More informationLUBRICATION SYSTEMS PRELIMINARY WE MEASURE OUR SUCCESS BY YOUR UP-TIME SINCE 1927
L U B R I C A T I O N S Y S T E M S 2017 LUBRICATION SYSTEMS PRELIMINARY WE MEASURE OUR SUCCESS BY YOUR UP-TIME SINCE 1927 GREASE LUBRICATION PUMPS HAMAX SYSTEM 2 BREAKER PUMP HYDRAULIC MOTOR Supply: Hydraulic
More informationDD & DM Valves. Dualine, Grease & Oil. General. Operation. Features. DM Valve. DD Valve R5 09/12
DD & DM Valves Dualine, Grease & Oil General DD and DM Valves are completely hydraulic in operation and will deliver either oil or grease. These Dualine valves are also fully and individually adjustable
More informationTHE REVOLUTIONARY P653S ELECTRIC CENTRO-MATIC PUMP
Lincoln The Industry Leader Since 1910 The Heart of a Centro-Matic Automated Lubrication System The P653S is the central pump station that automatically delivers lubricant through a single supply line
More informationPeople, Capabilities and Systems to Save Money and Increase Productivity
People, Capabilities and Systems to Save Money and Increase Productivity We re the largest and most successful company in our field because we continually satisfy our customers with the world s best lubrication
More informationG3 Electric Lubrication Pump. For Series Progressive and Injector-based Systems
G3 Electric Lubrication Pump For Series Progressive and Injector-based Systems Big features in a compact pump Introducing the G3 electric lubrication pump With its fl exible design, including adjustable
More informationOPERATOR S MANUAL AND SALES AND ENGINEERING DATA
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General
More informationPump Autolub-M. Product description APPLICATION PRODUCT CHARACTERISTICS FUNCTION
Pump utolub-m Product description PPLICTION In the sector of plants and machinery: Machine tools, presses, punching machines, shears, hoisting plants, water pumps, etc.. PRODUCT CHRCTERISTICS + Multi-line
More informationFARVAL DUALINE SYSTEMS. + Ideally suited for heavy industry + Continuous duty operation + More than half a century of excellence
FARVAL DUALINE SYSTEMS Ideally suited for heavy industry Continuous duty operation More than half a century of excellence Contents Introduction... 3 Dualine Systems... 4 Multiple Valve Manifold and Grease
More informationCONTROLS. Bray Pneumatic Actuators & Accessories. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.
CONTROLS A Division of BRAY INTERNATIONAL, Inc. Bray Pneumatic Actuators & Accessories Technical Manual TM-056 Pneumatic Actuator - 08//00 Bray Pneumatic Actuators & Accessories Technical Manual - Table
More informationVersa II SLR Lubricator
Versa II SLR Lubricator With Controller General The Versa II SLR Lubricator is an automatic, robust and durable pump that can handle oil. Its compact size is designed to fit your space requirements and
More informationYour key to maximum design flexibility with seriesprogressive
Bulletin 10102 R MSP Modular Divider Valves Your key to maximum design flexibility with seriesprogressive reliability. IDEX CORPORATION LUBRIQUIP, INC., A Unit of IDEX Corporation 1995. All Rights Reserved.
More informationfarval DUaLINE SYSTEMS Ideally suited for heavy industry Continuous duty operation Over 80 years of excellence
farval DUaLINE SYSTEMS + + + Ideally suited for heavy industry Continuous duty operation Over 80 years of excellence Contents Introduction... 3 Dualine Systems... 4 Multiple Valve Manifold and Grease Gun...4
More informationModular Lube Lubrication Systems
Modular Pump Accessories Low-Level Switches Low-level switches for modular design reservoirs. Use with Reservoir # Switch Type Electrical Rating 84235 87417, 87418, 87419 SPDT 84250 87400 SPDT 7 Amps 125
More informationPROFESSIONAL 18-VDC & 120-VAC POWERLUBER
Lincoln The Industry Leader Since 1910 Quality Lincoln Accessories 1201 Batteries 1401 1801 Continually satisfying our customers with the world s best lubrication equipment and pumping systems has made
More informationModels CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - 13C MAY FORM Page. Section - Q3
Models 94422 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" MAY - 2004 FORM 403467 Section - Q3 Page - 13C 9.00" (229 mm) 13.75" (350 mm) 0.35" (9mm) Mounting Holes 4.76" (121 mm) 9.84" (250 mm) Do not use
More informationModel CHASSIS LUBE ELECTRIC GREASE PUMP Series "C"
Model 94222 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" Indicates change MAY - 2004 FORM 403466 Section - Q3 Page - 12B 7.75" (197 mm) 12.6" (321 mm) 0.35" (9 mm) Mounting Holes 4.85" (123 mm) 8.85" (225
More informationQuicklub Lubrication Systems
Electric Grease Pumps 203 Series * Can be set for either minutes or seconds. P203 Series Pump These pumps are electrically operated and are used in progressive-type automated lubrication systems. The proven
More informationModels CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - Q3. MAY FORM Section
Models 94822 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - Q3 MAY - 2004 FORM 403468 Section Page - 14B 13.00" (330 mm) 17.72" (450 mm).35" (9 mm) Mounting Holes 4.72" (120 mm) 9.84" (250 mm) Figure 1
More informationTWO-LINE ELECTRIC CHANGE-OVER VALVE
TWO-LINE ELECTRIC CHANGE-OVER VALVE DPE APPLICATION Two-line electric change-over valves are necessary components of two-line central lubrication system circuits. They are usually connected after lubrication
More informationCentro-Matic. Automated Lubrication Systems
Centro-Matic Automated Lubrication Systems I install Lincoln Centro-Matic systems with confidence because I know they re going to prolong the life of my customer s critical machinery. Les Maness, Installation
More informationBijur Delimon Lubrication Equipment
New range Bijur Delimon NOW IN STOCK Lubrication Equipment Minimise downtime and maximise production with Bijur Delimon s range of highly reliable lubrication products and components. Pumps Distribution
More informationMonarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.
Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve
More informationComponent List for Graco Trabon Lubrication Systems Products
Component List for Graco Trabon Lubrication Systems Products Document No.: CL- F- Trabon Release Date: December 16, 2016 2017 Graco Inc. 352481 Rev. D 1/1/2017 Page No.: 1 of 54 DOCUMENT MANAGEMENT INFORMATION
More informationFracturing Equipment Lubrication Kits
Fracturing Equipment Lubrication Kits Get the Graco Advantage Because not all oil and gas applications require just one solution, Graco offers multiple levels of advanced control and monitoring and accessories
More informationSV SOLENOID OPERATED
Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal
More informationSOLUTIONS. Airless Spray System. In This Issue: Airless Spray System pg. 2. Improved FlowMaster pg. 5
THE LATEST PRODUCTS AND NEWS FOR LINCOLN CUSTOMERS SOLUTIONS DECEMBER 2002 VOL. 4, NO. 1 Airless Spray System In This Issue: Airless Spray System pg. 2 Improved FlowMaster pg. 5 MC 2 Progressive High Pressure
More informationDP556 Pump. 55:1, Air-operated, Grease. General. Operation. Technical Data. Installation. Mounting with Reinforced Cover (Recommended)
DP556 Pump 55:1, Air-operated, Grease General The DP556 Pump is a compressed air-operated reciprocating piston pump. This high capacity demand pump is compatible with mineral and synthetic grease and suitable
More informationFARVAL DUALINE SYSTEMS + + Ideally suited for heavy industry + + Continuous duty operation + + Over 80 years of excellence
FARVAL DUALINE SYSTEMS + + Ideally suited for heavy industry + + Continuous duty operation + + Over 80 years of excellence Contents Introduction... 3 Dualine Systems... 4 Multiple Valve Manifold and Grease
More informationHydraulic Pump. General description. Hydraulic circuit diagram
Hydraulic Pump SYSTEM 2 General description The hydraulically actuated grease pump BEKA HAMAX System 2 is mainly used to lubricate hydraulic hammers or other construction machinery accessories. Due to
More informationTable of Contents.
3551 Table of Contents Operating Information...2 Hydraulic Information Diagrams...7 Hydraulic and Electrical Installation...10 Parts List...11 Troubleshooting...15 Page 1 M3551 M3551 Operating Information
More informationHow to select parts to build an MX series progressive divider valve assembly, with NPT threading.
How to select parts to build an MX series progressive divider valve assembly, with NPT threading. A simple MX assembly consists of these basic parts: 1. Inlet 2. Valve sections 3. End section 4. Tie Rods
More informationDM Valve LINE 1 LINE 1 LINE 2. Positive indication at every bearing. adding or subtracting points at every bearing. Has only two moving parts.
DD & DM Valves Dualine, Grease & Oil General DD and DM Valves are completely hydraulic in operation and will deliver either oil or grease. These Dualine valves are also fully and individually adjustable
More informationDM Valve LINE 1 LINE 1 LINE 2. Positive indication at every bearing. adding or subtracting points at every bearing. Has only two moving parts.
DD & DM Valves Dualine, Grease & Oil General DD and DM Valves are completely hydraulic in operation and will deliver either oil or grease. These Dualine valves are also fully and individually adjustable
More informationPneumatic Chemical Metering Pump
Timberline s was designed with the well pumper and the chemical man in mind. Each pump has a simple but rugged design that can be repaired in the field within minutes on the tailgate of a pickup truck.
More informationLubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
More informationForm No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A
Parts List for: Form No. 000339 RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 3 9, 0 4 5 6 6 5 4, 3 9,0 SPX Hydraulic Technologies, Rockford, IL 609 USA powerteam.com
More informationMHH Modular Divider Valves
Manzel MHH Modular Divider Valves Available Electronic Only Modular, Series-Progressive, Divider Valve Delivers Positive Oil Lubrication for Gas Engines, Compressors and Similar Equipment at Pressures
More informationModular Lube. Automated Lubrication Systems
Modular Lube Automated Lubrication Systems We install Lincoln Industrial Modular Lube systems to protect our equipment and ensure the performance our customers demand. Ryan Riske, Weatherford Compression
More information3-way 1/2-2 Globe Valves
Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More informationRedundant Control System
Redundant Control System Safety instrumented system applications up to SIL 3 Process reliability Process valve diagnostics COMPLETE FUNCTIONAL SAFETY WITH ENHANCED RELIABILITY The Redundant Control System
More informationFarval. Dualine Installation System Start-Up. Bulletin DL300 BIJUR DELIMON INTERNATIONAL
Farval Dualine Installation System Start-Up Bulletin DL300 BIJUR DELIMON INTERNATIONAL 2685 Airport Road Kinston, NC 28504 Tel. 800-227-1063 Fax: 252-527-9232 website: www.bijurdelimon.com DC1-1 SECTION
More informationMulti-line and Progressive Systems
Multi-line and Progressive Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Multi-line and Progessive
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationELECTRIC GREASE AND OIL PUMPS ILC-MAX
ELECTRIC GREASE AND OIL PUMPS ILC-MAX ELECTRIC GREASE AND OIL PUMPS - ILC-MAX 24 ELECTRIC GREASE (ILC-MAX-G) OIL (ILC-MAX-O) PUMPS HOW TO ORDER 40.2.24AC.FST.G TANK 2 = 2 Kg transparent 4 = 4 Kg transparent
More informationHYDRAULIC STEERING MANIFOLD HM260 TABLE OF CONTENTS. 1. GENERAL INFORMATION... p TECHNICAL SPECIFICATIONS... p. 01
HYDRAULIC STEERING MANIFOLD HM260 TABLE OF CONTENTS 1. GENERAL INFORMATION... p. 01 2. TECHNICAL SPECIFICATIONS... p. 01 3. HYDRAULIC MANIFOLD... p. 01 4. INSTALLATION... p. 01 4.1 Mechanical 4.2 Hydraulic
More informationUV-5(A/B)T Valve Exploded View
UV-5(A/B)T Valve Exploded View 38 UV-5(A/B)T Parts List ITEM PART NO. DESCRIPTION QTY. 1 5000BA UV-5AT BODY 1 1 5900BA UV-5BT BODY AR 2 5012C BYPASS CLOSURE 1 3 5007-TAB BYPASS PISTON 1 4 5006-1 BYPASS
More informationSOLUTIONS. International Solutions. FOR A Global Marketplace. In This Issue:
THE LATEST PRODUCTS AND NEWS FOR LINCOLN INDUSTRIAL CUSTOMERS SOLUTIONS JANUARY 2000 VOL. 2, NO. 1 International Solutions FOR A Global Marketplace In This Issue: Worldwide Coverage for all Lincoln Industrial
More informationDUOFLEX lubrication pumps
DUOFLEX lubrication pumps 1-0012-1-US for dual-line central lubrication systems MS AS FD3 FV50 Applications DUOFLEX grease lubrication pumps are used when a large number of lube points have to be reliably
More informationDP33 Pump. 60:1, 3+3, Air-operated, Grease. General. Operation. Technical Data. Installation R2 08/15
DP33 Pump 0:1, 3+3, Air-operated, Grease General The DP33 Pump is a compressed air-operated reciprocating piston pump designed to pump all types of mineral greases. Suitable for installations with medium
More informationILC PICO-MAX ELECTRIC GREASE PUMP Automatically Lubricates Small, Medium and Large Machinery
Automatically Lubricates Small, Medium and Large Machinery Programmable Multi-Functional Lubricator 2 Outlet injection feeds for Progressive Distributors Up to 8 direct outlet injectors feeds The compact
More informationOperation & Service Manual
Operation & Service Manual Model: 06-4035-3600 Hydraulic Service Unit 03/2003 AA Rev. 15 Includes Illustrated Parts List Tronair, Inc. 1740 Eber Road Holland, Ohio 43528-9794 USA Telephone: (419) 866-6301
More informationModel 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG
Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics
More informationAirPulse TM Ultra Small Dot Positive Displacement Valve
AirPulse TM Ultra Small Dot APD1 The APD1 is an excellent solution for micro dot or micro bead dispensing while utilizing a positive displacement metering system. The APD1 precisely measures a predetermined
More informationMini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
More informationIndustrial Pumping Equipment PileDriver III Series III Air Motor Features
PileDriver III Series III Air Motor Features These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs. Air motors are 3,
More informationMizer Single Pump and Starter Box
Mizer Single Pump and Starter Box Table of Contents Line Diagram... 2 Overview... 3 Booster Pump Specifications... 3 Water... 3 Electrical... 3 Models... 3 Mounting... 4 Electrical... 6 Motor Rotation...
More informationM2500. Modular Valves for Central Lubrication Systems. Featuring. Valve sections. Zone control valves. Manifold bases. Accessories
M2500 Modular Valves for Central Lubrication Systems Featuring n Valve sections n Manifold bases n Zone control valves n Accessories For oil and grease applications Easy to install. Easy to modify. Easy
More information25 mm (1 in), 38 mm (1-1/2 in) & 50 mm (2 in) TYPE S FLOWMETERS WITH MODEL 157 AND 800 SERIES REGISTERS
TS- Rev. B Type S lowmeters 1, 1 1 2 & 2 mm (1 in), mm (1-1/2 in) & mm (2 in) TYPE S LOWMETERS WITH MODEL 7 AND 8 SERIES REGISTERS 1-1/2" Type S with Model 7 Register SPECIICATIONS 1" Type S with Model
More informationInjection Oilers, Micro Pumps
Injection Oilers, Micro Pumps 1-5012-4-US for minimal quantity metering Magnetic piston pump Injection oiler Micropump Grease metering P Metering pumps deliver and meter out lubricants. This piston pumps
More informationServ-O-Spray. Repeatable Precision
Serv-O-Spray Repeatable Precision Serv-O-Spray Repeatable Precision Serv-O-Spray delivers precise, repeatable shots of lubricant, and is ideal for any operation where controlled, intermittent fluid application
More informationServ-O-Spray. H&O DIE SUPPLY, INC Interstate 20 Kennedale, TX Repeatable Precision
Environmentally Friendly Lubrication Serv-O-Spray Repeatable Precision Serv-O-Spray Repeatable Precision Serv-O-Spray delivers precise, repeatable shots of lubricant, and is ideal for any operation where
More informationDM Valve LINE 1 LINE 1 LINE 2. Positive indication at every bearing. No small ports No system redesign when
DD & DM Valves dualine, Grease & Oil General dd and dm Valves are completely hydraulic in operation and will deliver either oil or grease. These dualine valves are also fully and individually adjustable
More informationElectric Pump EP-1. Electric pump EP-1 with steel reservoir and pump element PE-120 V with manometer:
The BEKA-MAX central lubrication pump model type EP-1 is electrical actuated and has a maximum of independently operating lubricant outlets. The pump is delivered with one pumping element as a standard,
More information