JCB GUIDE TO LEGISLATION: ANSI A92, CSA B354

Size: px
Start display at page:

Download "JCB GUIDE TO LEGISLATION: ANSI A92, CSA B354"

Transcription

1 JCB GUIDE TO LEGISLATION: ANSI A92, CSA B354

2 THE S THIS DOCUMENT SERVES AS A GUIDE TO ANSI 92 AND CSA 354. Both the proposed ANSI and new CSA standards have three main elements shown in the table below. DESCRIPTION ANSI CSA Design, Calculations, Safety Requirements and Test Methods for Mobile Elevating Work Platforms A92.20 B354.6 Safe Use of Mobile Elevating Work Platforms (MEWPs) A92.22 B354.7 Training Requirements for Operators of Mobile Elevating Work Platforms (MEWPs) A92.22 B JCB ACCESS CHANGES TO ANSI & CSA LEGISLATION

3 AERIAL WORK PLATFORMS (AWPS) WILL BE KNOWN AS MOBILE ELEVATING WORK PLATFORMS (MEWPS) AND WILL BE CLASSIFIED IN THE FOLLOWING WAY: CLASSIFICATION GROUP A GROUP B MEWPs with vertically rising platforms that stay within the tipping lines. MEWPs where the platform extends further than the machine chassis. TYPE 3 Controlled from the work platform and can be driven when elevated. TYPE 2 Controlled from the chassis and can be driven when elevated. TYPE 1 Only driven in the stowed position. The JCB Access range of Mobile Elevating Work Platforms includes Group A and Group B machines with Type 3 classification. JCB ACCESS CHANGES TO ANSI & CSA LEGISLATION 3

4 SPECIFICATION 1 1 GUARD RAILS A minimum guard rail height of 1.1m (43.5 ) All JCB electric scissor machines comply and feature folding guard rails as standard. 2 LOAD SENSE Machines must now monitor load within the basket and prevent machine operation in the event of an overload situation. 2 All JCB electric scissor machines comply and are fitted with the JCB load sensing system which, in the event of machine overload, disables all functions until the overload is removed. 3 3 ENTRY GATE & TOE BOARDS Chain entry systems on electric scissors are no longer permitted. A self closing gate and all round toe boards must be fitted. All JCB electric scissor machines comply and feature a self-closing, full -height gate and all-around toe boards. 4 JCB ACCESS CHANGES TO ANSI & CSA LEGISLATION

5 SPECIFICATION 4 4 WIND SPEED Machines need to be certified to be used outdoors which take into account both wind speed and side load forces. Select JCB electric scissor models are designed for outdoor use and comply with the requirements. 5 5 OPERATOR S MANUALS Operator s manuals shall include a list of MEWP functions, features, operating characteristics, limitations and devices included on the machine for familiarization. JCB s operator manual for electric scissor machines complies. 6 6 TILT SENSOR Machines can now operate on slopes but must be fitted with a tilt sensor for safe operation. All JCB electric scissor machines comply and are fitted with tilt sensors which allow the machines to operate on slopes of up to 1.5 degrees sideto-side and 3 degrees front-to-rear. IF IT S JCB, IT COMPLIES! JCB ACCESS CHANGES TO ANSI & CSA LEGISLATION 5

6 TRAINING ANSI AND CSA S MANDATE MORE COMPREHENSIVE TRAINING FOR PEOPLE INVOLVED WITH MEWPS. Both standards define specific groups that require training: Operators (ANSI & CSA) Supervisors (ANSI only) Occupants (ANSI & CSA) Maintenance & Repair Personnel (CSA only) The required training will provide dealers, rental houses, owners and operators with a greater understanding of safe work and maintenance practices. JCB dealer s can offer the required training or provide a referral to a certified training specialist. RISK ASSESSMENT ANSI and CSA standards require a full risk assessment for the job being performed, including but not limited to: 1. Task definition: Who? When? What? Where? How? 2. Machine selection: Scissor? Boom? Machine suitability. 3. Risk identification: Machine risks. Activity risks. Location risks. Personnel risks. 4. Risk minimization: What can be done to reduce risk? Ensure control measures are in place for all activities. 5. Communicate: Distribute the risk assessment to all involved in the activity and supervisors. 6. Revisit: Should any element of the job change, the risk assessment should be revisited taking into account the changes. A full explanation risk assessment requirements is included in mandatory MEWP training. JCB offers operator training in conjunction with the International Powered Access Federation (IPAF), to provide a common global learning platform for the certification of operators. This is delivered through the combination of distance learning and a hands on evaluation. Contact your participating local JCB dealer for more information. THE JCB PATHWAY DISTANCE LEARNING HANDS ON EVALUATION CERTIFICATION Inspection Maintenance Use Application / On Site Risk Assess- Operation IPAF PAL Card 6 JCB ACCESS CHANGES TO ANSI & CSA LEGISLATION

7 THE JCB RANGE OF ACCESS ELECTRIC SCISSOR LIFTS ARE DESIGNED TO A HIGHER, TO MEET THE NEEDS OF RENTAL COMPANIES AND CONTRACTORS. THE NINE ELECTRIC SCISSORS MODELS, WITH PLATFORM HEIGHTS FROM 15 FEET TO 45 FEET, COMPLY TO THE NEW S. RANGE S1530E S1930E S2032E S2046E S2632E S2646E S3246E S4046E S4550E Platform Height ft-in Weight lb Load Capacity lb Outdoor Certified Power to Platform Folding Rails Extending Deck For more details, contact JCB North America : IF IT S JCB, IT COMPLIES! JCB ACCESS CHANGES TO ANSI & CSA LEGISLATION 7

8 IF IT S JCB, IT COMPLIES! JCB North America Issue 1, Nov JCB ACCESS CHANGES TO ANSI & CSA LEGISLATION 2000 Bamford Blvd., Pooler, Georgia, Tel: (912) Download the very latest information on all available N.orth American product ranges at JCB Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB Inc. All references in this publication to operating weights, sizes, capacities and other performance measurements are provided for guidance only and may vary dependent upon the exact specification of machine. They should not therefore be relied upon in relation to suitability for a particular application. Guidance and advice should always be sought from your JCB Dealer. JCB reserves the right to change specifications without notice. Illustrations and specifications shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. /JCBNA /JCBNORTHAMERICA /JCBNA

ELECTRIC SCISSORS. Platform height 4.6m (15 1 ) to 13.8m (45 3 ) ACCESS

ELECTRIC SCISSORS. Platform height 4.6m (15 1 ) to 13.8m (45 3 ) ACCESS ELECTRIC SCISSORS Platform height 4.6m (15 1 ) to 13.8m (45 3 ) ACCESS ACCESS high quality, world-class equipment. Whilst our achievements to date have been considerable, at JCB we believe in always looking

More information

JCB ATTACHMENTS FOR MINI AND MIDI EXCAVATORS A class-leading range of attachments suitable for mini and midi excavators.

JCB ATTACHMENTS FOR MINI AND MIDI EXCAVATORS A class-leading range of attachments suitable for mini and midi excavators. JCB ATTACHMENTS FOR MINI AND MIDI EXCAVATORS A class-leading range of attachments suitable for mini and midi excavators. #completingthesolution www.jcb.com AREAS OF APPLICATION. QUICK HITCHES. CONTENTS

More information

SKID STEER LOADER 135 HD/155 HD

SKID STEER LOADER 135 HD/155 HD SKID STEER LOADER 15 HD/155 HD Operating weight: 2770 2900 kg Gross rated power: 4 42 kw (46 57 hp) PRODUCTIVE PERFORMANCE. POWER AND PERFORMANCE ARE ESSENTIAL FEATURES FOR ANY SKID STEER LOADER. WITH

More information

SKID STEER LOADER 135 HD/155 HD

SKID STEER LOADER 135 HD/155 HD SKID STEER LOADER 135 HD/155 HD Operating weight: 2770 2900 kg Gross rated power: 34 42 kw (46 57 hp) PRODUCTIVE PERFORMANCE. POWER AND PERFORMANCE ARE ESSENTIAL FEATURES FOR ANY SKID STEER LOADER. WITH

More information

Rough Terrain Fork Lift

Rough Terrain Fork Lift ROUGH TERRAIN FORK LIFT Rough Terrain Fork Lift Engine Power: 55kW (74hp) Operating Capacity: 2.6 to 4 tonnes Operating Weight: 5910kg to 7500kg Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes

More information

MICRO EXCAVATORS 8008/8010 CTS

MICRO EXCAVATORS 8008/8010 CTS MICRO EXCAVATORS 8008/8010 CTS Operating weight: 950kg/1110kg Net engine power: 9.0kW/13.8kW PRODUCTIVITY AND PERFORMANCE. Class-leading power reduces time and manpower of labour-intensive digging jobs

More information

A Product of Hard Work AERIAL WORK PLATFORM

A Product of Hard Work AERIAL WORK PLATFORM A Product of Hard Work AERIAL WORK PLATFORM Smooth, precise, versatile Working at height has never been so easy When you need to get your people up to inaccessible areas, you need a combination of flexibility

More information

8061 CTS MIDI EXCAVATOR Max Operating Weight: 6,175kg Net Engine Power: 41kW

8061 CTS MIDI EXCAVATOR Max Operating Weight: 6,175kg Net Engine Power: 41kW 8061 CTS MIDI EXCAVATOR Max Operating Weight: 6,175kg Net Engine Power: 41kW STRENGTH, DURABILITY & PRODUCTIVITY THE MIDI EXCAVATOR FROM JCB OFFERS COMPACT, VERSATILE PERFORMANCE. EXPERIENCE SUPERB LEVELS

More information

WHEELED EXCAVATOR RANGE

WHEELED EXCAVATOR RANGE WHEELED EXCAVATOR RANGE THE. Ever since JCB was founded by Joseph Cyril Bamford in a small garage in Staffordshire in 1945, innovation has driven our machines and our thinking. Of course we ve grown since

More information

TELESKID 3TS-8W/3TS-8T

TELESKID 3TS-8W/3TS-8T NEW TELESKID 3TS-8W/3TS-8T Gross rated power: 74 hp/55 kw Lift capacity: 3,208-3,695 lb (1,347-1,676 kg) Max load height: 13 ft 5 in (4.1 m) Introducing a unique machine with endless possibilities. The

More information

GUIDELINES FOR THE USE OF SCISSOR LIFTS (ELEVATING WORK PLATFORMS) AND AERIAL BOOM LIFTS (EXTENSIBLE BOOM PLATFORMS)

GUIDELINES FOR THE USE OF SCISSOR LIFTS (ELEVATING WORK PLATFORMS) AND AERIAL BOOM LIFTS (EXTENSIBLE BOOM PLATFORMS) Building for Tomorrow s Leaders LACCD Program Management 1055 Corporate Center Drive Monterey Park, California 91754 www.build-laccd.org 323.981.7200 tel BuildSafe Safety Bulletin for April 2018 GUIDELINES

More information

JCB POWER PRODUCTS QS GENERATOR RANGE. Power: 50Hz, kVA / 60Hz, kW

JCB POWER PRODUCTS QS GENERATOR RANGE. Power: 50Hz, kVA / 60Hz, kW JCB POWER PRODUCTS QS GENERATOR RANGE Power: 50Hz, 20-220kVA / 60Hz, 18-165kW PERFORMANCE AND INNOVATION. THE G20QS TO G220QS ARE A COMPREHENSIVE GENERATOR RANGE. AS WITH ALL OF OUR MODELS, THESE MACHINES

More information

JCB QS GENERATORS G20QS G220QS

JCB QS GENERATORS G20QS G220QS NEW JCB QS GENERATORS G20QS G220QS 18 200kVA PRP / 20 220kVA ESP 50Hz 25 200kVA PRP / 28 220kVA ESP 60Hz PERFORMANCE AND INNOVATION. THE G20QS TO G220QS ARE THE VERY LATEST GENERATORS IN THE COMPREHENSIVE

More information

Australian Standard. Cranes, hoists and winches Safe use. Part 10: Mobile elevating work platforms AS AS

Australian Standard. Cranes, hoists and winches Safe use. Part 10: Mobile elevating work platforms AS AS AS 2550.10 2006 AS 2550.10 2006 Australian Standard Cranes, hoists and winches Safe use Part 10: Mobile elevating work platforms This Australian Standard was prepared by Committee ME-005, Cranes. It was

More information

DOUBLE DRUM ROLLER VMD70/VMD100. VMD70: Drum width: 650mm Operating weight: 740kg VMD100: Drum width: 750mm Operating weight: 920kg

DOUBLE DRUM ROLLER VMD70/VMD100. VMD70: Drum width: 650mm Operating weight: 740kg VMD100: Drum width: 750mm Operating weight: 920kg DOUBLE DRUM ROLLER VMD70/VMD100 VMD70: Drum width: 650mm Operating weight: 740kg VMD100: Drum width: 750mm Operating weight: 920kg When you re in a tight spot trust the JCB VMD70 and VMD100 to get the

More information

Wheeled Loading Shovel 403. Max. engine power: 28kW (37.5hp) Max. operating weight: 2115kg Max. loader capacity: 0.3m³

Wheeled Loading Shovel 403. Max. engine power: 28kW (37.5hp) Max. operating weight: 2115kg Max. loader capacity: 0.3m³ Wheeled Loading Shovel 403 Max. engine power: 28kW (37.5hp) Max. operating weight: 2115kg Max. loader capacity: 0.3m³ Go anywhere, do anything compact performance Compact dimensions allow the 403 to access

More information

TRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.

TRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0. TRACKED EXCAVATOR JS370 LONG REACH Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.79m 3 STATIC DIMENSIONS I E H M N J F K L G C D A B Illustration shows optional

More information

Wind and Temperature Tip Over Hazard Do not add notice boards or similar

Wind and Temperature Tip Over Hazard Do not add notice boards or similar Lift & Work Platform Safety Information Safety Information: Boom Lifts Safety Information: Scissor Lifts Safety Information: Boom Lifts Power Lines Electrocution Hazard Maintain safe clearance from Electrical

More information

JCB ATTACHMENTS AGRICULTURAL ATTACHMENTS. Stronger, lighter, more durable.

JCB ATTACHMENTS AGRICULTURAL ATTACHMENTS. Stronger, lighter, more durable. JCB ATTACHMENTS AGRICULTURAL ATTACHMENTS Stronger, lighter, more durable. MAXIMUM PERFORMANCE MAXIMUM EFFICIENCY. JCB HAS ALWAYS UNDERSTOOD THAT, WHEN IT COMES TO AGRICULTURAL MACHINERY, ONLY THE VERY

More information

A Product of Hard Work ROUGH TERRAIN FORK LIFT

A Product of Hard Work ROUGH TERRAIN FORK LIFT A Product of Hard Work ROUGH TERRAIN FORK LIFT Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes and lift heights from 3.6 to 6.70m 63kW (84hp) engine delivers powerful performance JCB Synchro

More information

TELESKID 3TS-8W/3TS-8T

TELESKID 3TS-8W/3TS-8T NEW TELESKID 3TS-8W/3TS-8T Gross rated power: 74hp/55kW Lift capacity: 3208-3695lb (1455-1676kg) Max load height: 13ft 5in (3.8m) Introducing a unique machine with endless possibilities. The new JCB Teleskid

More information

JCB Eco Welfare Unit Compact. Sustainable. Portable.

JCB Eco Welfare Unit Compact. Sustainable. Portable. NEW jcb eco welfare unit JCB Eco Welfare Unit Compact. Sustainable. Portable. compact. sustainable. portable. Portable The only TRUE 1v mobile welfare unit available in the UK. Primarily powered by solar

More information

AERIAL LIFTS/MAN-LIFTS

AERIAL LIFTS/MAN-LIFTS AERIAL LIFTS/MAN-LIFTS Aerial lifts are pieces of equipment that many workers can't imagine working without. This equipment, if used correctly, provides quick and safe access to work areas that at one

More information

TRACKED EXCAVATOR RANGE. broekveldt.nl

TRACKED EXCAVATOR RANGE. broekveldt.nl TRACKED EXCAVATOR RANGE THE Ever since JCB was founded by Joseph Cyril Bamford in a small garage in Staffordshire in 1945, innovation has driven our machines and our thinking. Of course we ve grown since

More information

A Product of Hard Work POWERPACKS AND BREAKERS

A Product of Hard Work POWERPACKS AND BREAKERS A Product of Hard Work POWERPACKS AND BREAKERS RELIABILITY POWERPACKS AND BREAKERS Built-in quality and reliability A growing tide of opinion says that hydraulic powerpacks make better business sense than

More information

shortform operating instructions

shortform operating instructions B 0800 52 15 95 www.facelift.co.uk ascendant 17m shortform operating instructions SAFETY TIPS ALWAYS Inspect your machine before use. Check all operations including ground controls. Check ground conditions.

More information

Section 27 Brieser Construction SH&E Manual

Section 27 Brieser Construction SH&E Manual Brieser Construction SH&E Manual January 2017 This program establishes the minimum requirements for the operation of aerial work platforms used in the course of work performed by personnel. This program

More information

HYDRAULIC EXCAVATOR JS300 LC. Net engine power: 165kW (221hp) Operating weight: 32430kg

HYDRAULIC EXCAVATOR JS300 LC. Net engine power: 165kW (221hp) Operating weight: 32430kg HYDRAULIC EXCAVATOR JS300 LC Net engine power: 165kW (221hp) Operating weight: 32430kg PERFORMANCE AND PRODUCTIVITY. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO BE TOUGH ENOUGH TO PERFORM

More information

OPERATORS MANUAL AND SAFETY INSTRUCTIONS FOR STAR SAFETY WORK PLATFORMS

OPERATORS MANUAL AND SAFETY INSTRUCTIONS FOR STAR SAFETY WORK PLATFORMS 4101 Garland Dr, Fort Worth, Texas Phone: 817-485-6073 MODEL 1208B SHOWN SAFETY WORK PLATFORM INDUSTRIAL PLATFORM OPERATORS MANUAL AND SAFETY INSTRUCTIONS FOR STAR SAFETY WORK PLATFORMS INCLUDES MODELS

More information

Work Platforms. Operators Manual Warning Stickers ANSI Standards. ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 )

Work Platforms. Operators Manual Warning Stickers ANSI Standards. ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 ) Work Platforms ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 ) Operators Manual Warning Stickers ANSI Standards Marv Haugen Enterprises 1851 Heartland Ave. 1851 Heartland

More information

A Product of Hard Work COMPACT LOADING SHOVEL 403

A Product of Hard Work COMPACT LOADING SHOVEL 403 A Product of Hard Work Go anywhere, do anything compact performance Compact dimensions allow the 403 to access restricted farm buildings and other sites Hydrostatic transmission makes it easy for anyone

More information

TRACKED EXCAVATOR JS85. Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: m 3

TRACKED EXCAVATOR JS85. Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: m 3 TRACKED EXCAVATOR JS85 Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: 0.32 0.35m 3 STATIC DIMENSIONS K I L M J F E H G ENGINE Model Type Rated power (net) Torque Piston

More information

LIFTING DEVICES AND LIFTING EQUIPMENT - USE AT INOVYN

LIFTING DEVICES AND LIFTING EQUIPMENT - USE AT INOVYN INSTRUCTIONS 1(9) LIFTING DEVICES AND LIFTING EQUIPMENT - USE AT INOVYN Table of contents 1. Lifting devices and lifting equipment - General - Inspection and risk assessment - Equipment requirements -

More information

Operation of Fork Lift Trucks

Operation of Fork Lift Trucks Operation of Fork Lift Trucks 1. PURPOSE The purpose of this Procedure is to define the rules for the safe operation of Forklift trucks within the University. 2. SCOPE These rules apply to all rider-type

More information

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40, 524-50, 527-55 SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40 MAX. PAYLOAD: MAX. LIFT HEIGHT: MAX. HORSEPOWER: 4000lb 13ft 3in 50hp B A JCB LOADALL 520-40 H D E C F G STATIC DIMENSIONS

More information

DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD

DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD (By authority conferred on the Director of the Department of Licensing and Regulatory Affairs

More information

Solutions for Working at Height Safely and Efficiently

Solutions for Working at Height Safely and Efficiently Solutions for Working at Height Safely and Efficiently Taking You to New Heights Safely The Lift You Need Manlift provides safe and efficient solutions for working at height. At Manlift we are committed

More information

SECTION 14: AERIAL LIFT PROGRAM

SECTION 14: AERIAL LIFT PROGRAM SECTION 14: AERIAL LIFT PROGRAM Fisher Auto Parts is committed to promoting a safe and healthy environment for all employees and customers. Protection from accidental loss of any resources, especially

More information

DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD STANDARDS

DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD STANDARDS DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY AND HEALTH STANDARD STANDARDS Filed with the Secretary of State on These rules become effective immediately upon

More information

shortform operating instructions

shortform operating instructions 0800 52 15 95 www.facelift.co.uk nifty heightrider 10 & 12 shortform operating instructions self propelled access This book is designed as a guide to enable you to start work quickly and safely. It is

More information

MOBILE VERTICAL LIFT 20MVL 20MVL WITH PARCEL TRAY. Joystick proportional control for drive, lift and lower. Extendable platform. Load Sensing System

MOBILE VERTICAL LIFT 20MVL 20MVL WITH PARCEL TRAY. Joystick proportional control for drive, lift and lower. Extendable platform. Load Sensing System MOBILE VERTICAL LIFT 2MVL Joystick proportional control for drive, lift and lower Load Sensing System Extendable platform Dual chains and timing cable on anodised aluminium mast 2MVL WITH PARCEL TRAY Enclosed

More information

Construction Loadalls /541-70/535-95/ / HiViz/ HiViz/ /

Construction Loadalls /541-70/535-95/ / HiViz/ HiViz/ / Construction Loadalls -/-/-/-/- HiViz/- HiViz/-/- Gross power: kw/hp kw/hp, Lift capacity: -, Lift height: SPECIFICATION CONSTRUCTION LOADALLS -/-/-/-/- HiViz/- HiViz/-/- STATIC DIMENSIONS C A H D J E

More information

National Grid UK Electricity Transmission plc. NATIONAL SAFETY INSTRUCTION and Guidance

National Grid UK Electricity Transmission plc. NATIONAL SAFETY INSTRUCTION and Guidance National Grid UK Electricity Transmission plc NATIONAL SAFETY INSTRUCTION and Guidance NSI 31 APPROVAL / WITHDRAWAL OF PROCEDURES FOR NATIONAL GRID ELECTRICITY SAFETY RULES & SUPPORTING DOCUMENTATION Copyright

More information

PRODUCT RANGE OVERVIEW

PRODUCT RANGE OVERVIEW PRODUCT RANGE OVERVIEW Snorkel is a leading global manufacturer of aerial work platforms. Our comprehensive range of aerial lifts provides safe and efficient working at height, from 4 metres to 40 metres.

More information

X X26 Serial Numbers

X X26 Serial Numbers X 26-32 X26 Serial Numbers 50906 53100 ENGLISH When contacting Upright for service or parts information, be sure to include the MODEL and SERIAL NUMBERS from the equipment nameplate. Should the nameplate

More information

Your Powered Access specialist. Access Platform Equipment Rental, Sales & Training

Your Powered Access specialist. Access Platform Equipment Rental, Sales & Training Your Powered Access specialist Access Platform Equipment Rental, Sales & Training Raising standards in Powered Access Rental, Sales & Training Access Rental Gulf was established in and has one of the most

More information

SAFETYFIRSTTRAINING.CA

SAFETYFIRSTTRAINING.CA 2425 Matheson Blvd. East, 8th Floor Mississauga, ON L4W 5K4 info@safetyfirsttraining.ca 905.672.3600 COURSE LIBRARY EQUIPMENT This all-in-one safety solution includes access to a comprehensive library

More information

Work at height: Elevated risk

Work at height: Elevated risk Chris Wraith outlines how the powered access industry is using global fatality data to reduce serious MEWP accidents. Article date: Monday, August 7, 2017-18:00 MEWPs Falls from height are still the number

More information

Loadall LOADALL

Loadall LOADALL 515-40 Loadall 515-40 LOADALL Innovation at its heart At 1.8m, it s the ultimate, go-anywhere, mini marvel You want compact size and manoeuvrability. You want a machine that works in restricted height

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual Second Edition First Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

NORTH AMERICA CONSTRUCTION RANGE

NORTH AMERICA CONSTRUCTION RANGE NORTH AMERICA CONSTRUCTION RANGE INTRODUCTION Introducing the world s best construction equipment From the time that Joseph Cyril Bamford founded JCB in a small garage in 1945, we ve worked hard to earn

More information

WARNING. The X32 Machine has been re-assessed to ensure compliance to the Machinery Directive (2006/42/EC). The Machine rating has been changed from:

WARNING. The X32 Machine has been re-assessed to ensure compliance to the Machinery Directive (2006/42/EC). The Machine rating has been changed from: WARNING The X32 Machine has been re-assessed to ensure compliance to the Machinery Directive (2006/42/EC). The Machine rating has been changed from: Windspeed rating of 12.5 m/s (Beaufort 6) To Windspeed

More information

SELF-PROPELLED SCISSOR LIFTS OPERATOR S MANUAL. with Maintenance Information

SELF-PROPELLED SCISSOR LIFTS OPERATOR S MANUAL. with Maintenance Information SELF-PROPELLED SCISSOR LIFTS OPERATOR S MANUAL with Maintenance Information ( For S0608EH, S0808EH, S08EH, S0EH, SEH, S4EH ) ( For S0608E, S0808E, S08E, S0E, SE, S4E ) ( Hydraulic Motor / DC Motor Drive

More information

ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information. Second Edition Second Printing Part No.

ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information. Second Edition Second Printing Part No. ANSI/CSA North America South America Asia AUS Australia with Maintenance Information Second Edition Second Printing Part No. 133291 Operator's Manual Second Edition Second Printing Important Read, understand

More information

WARNING. The MX19 Machine has been re-assessed to ensure compliance to the Machinery Directive (2006/42/EC).

WARNING. The MX19 Machine has been re-assessed to ensure compliance to the Machinery Directive (2006/42/EC). WARNING The MX19 Machine has been re-assessed to ensure compliance to the Machinery Directive (2006/42/EC). The Machine rating has been changed from: Windspeed rating of 12.5 m/s (Beaufort 6) To Windspeed

More information

shortform operating instructions

shortform operating instructions 0800 52 15 95 www.facelift.co.uk UpRight sl20 shortform operating instructions scissor lifts This book is designed as a guide to enable you to start work quickly and safely. It is not intended to replace

More information

National Grid UK Electricity Transmission plc. NATIONAL SAFETY INSTRUCTION and Guidance

National Grid UK Electricity Transmission plc. NATIONAL SAFETY INSTRUCTION and Guidance National Grid UK Electricity Transmission plc NATIONAL SAFETY INSTRUCTION and Guidance WASHING HIGH VOLTAGE INSULATORS USING PORTABLE WASHING EQUIPMENT Copyright National Grid plc 2014, all rights reserved.

More information

wide in travel mode 31 ft Tip Height 37 ft with Jib Wireless Radio Remote Control 5,800 lbs Capacity

wide in travel mode 31 ft Tip Height 37 ft with Jib Wireless Radio Remote Control 5,800 lbs Capacity 24 wide in travel mode Wireless Radio Remote Control 31 ft Tip Height 37 ft with Jib 5,800 lbs Capacity URW205 in Action LOAD CHART Lifting capacity varies depending on outrigger configuration and boom

More information

Safety at Every Level GENIE AERIAL WORK PLATFORMS

Safety at Every Level GENIE AERIAL WORK PLATFORMS Safety at Every Level GENIE AERIAL WORK PLATFORMS Customers First Always Partnering for Success Our dedication to lifting you higher extends well beyond the physical reach of our products. We thrive on

More information

JCB MINI EXCAVATORS 8025 ZTS / 8030 ZTS / 8035 ZTS

JCB MINI EXCAVATORS 8025 ZTS / 8030 ZTS / 8035 ZTS OPERATING WEIGHT: 5919 lb (685 kg) 709 lb (317 kg) 8049 lb (3651 kg) NET ENGINE POWER: 6.8 hp (0.1 kw) 6.8 hp (0.1kW) 30.4 hp (.7 kw) Interim Tier IV D F K 805 C C G L H I A B E J STATIC DIMENSIONS ft-in

More information

WHEELED LOADING SHOVEL 432ZX

WHEELED LOADING SHOVEL 432ZX WHEELED LOADING SHOVEL 432ZX Operating weight: 2,00kg Gross engine power: 2kw (50hp) Full turn tipping load: 7,68 kg Standard shovel capacity: 2.m 3 DURABILITY AND BUILD QUALITY. Because industry is tough,

More information

JCB MIDI EXCAVATOR 8085 ZTS

JCB MIDI EXCAVATOR 8085 ZTS JCB MIDI EXCAVATOR OPERATING WEIGHT: 17,694 lb (8026 kg) NET ENGINE POWER: 53 hp (39.5 kw) Interim Tier IV F E L G G1 H M D N I J A B C K STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers 7-6 (2280)

More information

Class-leading performance, styling and serviceability It s the perfect combination for ultimate productivity

Class-leading performance, styling and serviceability It s the perfect combination for ultimate productivity COMPACTION RANGE Class-leading performance, styling and serviceability It s the perfect combination for ultimate productivity PERFORMANCE, QUALITY AND COMFORT THE COMPLETE COMPACTION SOLUTION JCB Compaction

More information

JCB LOADALL / /

JCB LOADALL / / MAX PAYLOAD: 4,000 lb (1,814 kg) MAX LIFT HEIGHT: 13 ft 3 in (4.0 m) MAX HORSEPOWER: 49 hp (37 kw) B A 520-40 H D E C F G 520-40 STATIC DIMENSIONS 10.00 x 16.5 12 ply Tires 12.00 x 16.5 10 ply Tires A

More information

Operator's Manual. GS -1330m. AUS Australia. with Maintenance Information. First Edition First Printing Part No GT. Serial Number Range

Operator's Manual. GS -1330m. AUS Australia. with Maintenance Information. First Edition First Printing Part No GT. Serial Number Range Serial Number Range GS -1330m GS30MD-101 AUS Australia with Maintenance Information First Edition First Printing Part No. 1295173GT Front Matter Contents Introduction... 1 Symbol and Hazard Pictorials

More information

Raising Standards in Accessibility

Raising Standards in Accessibility Raising Standards in Accessibility HIGHLanDer VERTICAL PLatform Lifts Comprehensive Line of Vertical Lifts for Levels up to 14 Feet. Harmar is the leading manufacturer of innovative accessibility solutions,

More information

CONSTRUCTION LIFT AND PLACE LOADALLS / / / / / /

CONSTRUCTION LIFT AND PLACE LOADALLS / / / / / / CONSTRUCTION LIFT AND PLACE LOADALLS 0- / 07- / 09- / 0- / 0- / - / - Gross power: 7 hp / kw 09 hp / 8 kw Lift capacity:,000 lb,000 lb Lift height: JCB LOADALL: ULTIMATE RETURN ON INVESTMENT. JCB LOADALL

More information

Technical Test Theory Mobile Elevating Work Platform - Boom A26

Technical Test Theory Mobile Elevating Work Platform - Boom A26 1 Why are those who operate MEWPs generally regarded as safety-critical workers? 2 What are the possible outcomes of facing prosecution for not complying with legislation and regulations? 3 How do stabilisers

More information

ELECTRIC SCISSOR LIFTS COMPACT 8W/10/12. Maximum load capacity of 990 lb (450 kg) 3 ft (0,92m) platform extension. 5 in (13 cm) ground clearance

ELECTRIC SCISSOR LIFTS COMPACT 8W/10/12. Maximum load capacity of 990 lb (450 kg) 3 ft (0,92m) platform extension. 5 in (13 cm) ground clearance ELECTRIC SCISSOR LIFTS COMPACT 8W/10/12 Maximum load capacity of 990 lb (450 kg) 3 ft (0,92m) platform extension 5 in (13 cm) ground clearance Security system with Pot Hole protection ELECTRIC SCISSOR

More information

EXPLOSION PROOF. Diesel Engines For Hazardous Areas

EXPLOSION PROOF. Diesel Engines For Hazardous Areas EXPLOSION PROOF Diesel Engines For Hazardous Areas HAZARDOUS AREAS Managing the Risk There is always a risk of a flammable hydrocarbon release in the oil and gas industry. When the release comes into contact

More information

Boom Lift Platform Capacity Reduction Manual. For Set Lighting Technicians and Studio Grips

Boom Lift Platform Capacity Reduction Manual. For Set Lighting Technicians and Studio Grips Boom Lift Platform Capacity Reduction Manual For Set Lighting Technicians and Studio Grips Part Number 0075625 August, 2008 The aerial platform is not electrically insulated. Death or serious injury will

More information

Important. Contents. Contact us: First Edition Third Printing. Operator's Manual

Important. Contents. Contact us: First Edition Third Printing. Operator's Manual Operator's Manual First Edition Third Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator s Manual Third Edition Third Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Parts Manual. Operator's Manual Supplement. Special Supplement to Genie Industries Operator's Manual

Parts Manual. Operator's Manual Supplement. Special Supplement to Genie Industries Operator's Manual Parts Manual Operator's Manual Supplement Special Supplement to Genie Industries Operator's Manual Serial Number Range For Authorized and Trained Set Lighting Technicians and Studio Grips WARNING This

More information

PRODUCT RANGE OVERVIEW

PRODUCT RANGE OVERVIEW QUEENSLAND, AUSTRALIA 11 Meakin Road, Meadowbrook, Qld, 4131 SALES 07 3489 7000 FAX 07 3489 7099 SERVICE & PARTS 07 3489 7599 FAX 07 3489 7588 PRODUCT RANGE OVERVIEW Snorkel is a leading global manufacturer

More information

LIGHT DUTY PIPE/STEEL STUD RACK Designed, tested, and certified by Skyjack

LIGHT DUTY PIPE/STEEL STUD RACK Designed, tested, and certified by Skyjack LIGHT DUTY PIPE/STEEL STUD RACK Designed, tested, and certified by Skyjack The light duty pipe rack maximizes platform work space and productivity. The pipe rack is an ideal aid for plumbers, electricians

More information

NEW TELESKID 3TS-8W. Gross rated power: 55kW (74hp) Rated operating capacity at full extension: 611kg Maximum load height: 4.05m

NEW TELESKID 3TS-8W. Gross rated power: 55kW (74hp) Rated operating capacity at full extension: 611kg Maximum load height: 4.05m NEW TELESKID 3TS-8W Gross rated power: 55kW (74hp) Rated operating capacity at full extension: 611kg Maximum load height: 4.05m Introducing a unique machine with endless possibilities. The new JCB Teleskid

More information

Health & Safety Policy and Procedures Manual SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS

Health & Safety Policy and Procedures Manual SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS 1. Scope: This policy and procedure applies to the design, construction testing, use, and maintenance or personnel platforms and hosting of personnel platforms

More information

ELECTRIC SCISSOR LIFTS

ELECTRIC SCISSOR LIFTS 930ES 2030ES 2630ES 2646ES 3246ES A. Platform Height Elevated 5.72 m 6.0 m 7.75 m 7.92 m 9.68 m B. Platform Height Lowered 0.86 m.23 m.26 m.26 m C. Platform Railing Height D. Stowed Height (Rails Folded).98

More information

Ground Controls. Cage Control Levers. 1) Cage/Platform 2) Cage Controls 3) Ground Controls Buttons. Ground Control Levers

Ground Controls. Cage Control Levers. 1) Cage/Platform 2) Cage Controls 3) Ground Controls Buttons. Ground Control Levers P14936/01 P14939/01 1 2 3 4 5 6 Nifty HR12 (12082) 1) Cage/Platform 2) Cage Controls 3) Ground Controls Buttons 4) Ground Controls - Levers 5) Lower 6) Upper 7) Cage/Ground Selector 8) Manual Hand Pump

More information

Revision #: 14.4 Document #: Page: 1 of 5 Title: Mobile Aerial Work Platforms

Revision #: 14.4 Document #: Page: 1 of 5 Title: Mobile Aerial Work Platforms Revision #: 14.4 Document #: 12.06 Page: 1 of 5 1. PURPOSE The purpose of this procedure is to provide guidance on the safe use of mobile aerial work platforms. 2. SCOPE This procedure applies to all employees

More information

Technical Test Theory Lorry Loader A36

Technical Test Theory Lorry Loader A36 1 Using the Operator s Manual, state the hydraulic tank oil capacity OR oil type. Note: The Operator s Manual for the machine being used for the test MUST be available for reference by the candidate. 2

More information

EXPLOSION PROOF. Diesel Engines For Hazardous Areas

EXPLOSION PROOF. Diesel Engines For Hazardous Areas EXPLOSION PROOF Diesel Engines For Hazardous Areas HAZARDOUS AREAS Managing the Risk There is always a risk of a flammable hydrocarbon release in the oil and gas industry. When the release comes into contact

More information

PROCEDURE. Operative Date: 22/12/2016 Department: HSEC. Revision: Author: D Steel CONTENTS

PROCEDURE. Operative Date: 22/12/2016 Department: HSEC. Revision: Author: D Steel CONTENTS Title: Cranes - Inspection and Maintenance PROCEDURE Procedure No: P314.422 Issue: 1 Revision: 0 Operative Date: 22/12/2016 Department: HSEC Sect./Classification: Safety / Gear & Equipment Author: D Steel

More information

Operator's Manual GS -1530/32 GS -1930/32 GS GS GS GS GS GS with Maintenance Information

Operator's Manual GS -1530/32 GS -1930/32 GS GS GS GS GS GS with Maintenance Information GS -1530/32 GS -1930/32 GS -2032 GS -2632 GS -3232 GS -2046 GS -2646 GS -3246 CE with Maintenance Information Original Instructions Sixth Edition Second Printing Part No. 133568GT Front Matter Important

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator s Manual Third Edition Fourth Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

BACKHOE LOADER RANGE

BACKHOE LOADER RANGE BACKHOE LOADER RANGE BUILDING THE ULTIMATE RANGE. Ever since JCB was founded by Joseph Cyril Bamford in a small garage in Staffordshire in 1945, innovation has driven our machines and our thinking. Of

More information

Operator s Manual Z-45/25 Z-45/25J. DC Power Bi-Energy Power. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information

Operator s Manual Z-45/25 Z-45/25J. DC Power Bi-Energy Power. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information Operator s Manual Z-45/25 Z-45/25J DC Power Bi-Energy Power ANSI/CSA North America South America Asia AUS Australia with Maintenance Information Fourth Edition Second Printing Part No. 114344 Operator's

More information

JCB MINI EXCAVATORS 8016 & 8018

JCB MINI EXCAVATORS 8016 & 8018 JCB MINI EXCAVATORS & OPERATING WEIGHT: NET ENGINE POWER: 55 lbs (59 kg) & lbs ( kg) 9 HP (. kw) H I E F K C J A B D G L JCB MINI EXCAVATORS & STATIC DIMENSIONS Machine model A Sprocket idler centers -

More information

PRODUCT RANGE OVERVIEW

PRODUCT RANGE OVERVIEW PRODUCT RANGE OVERVIEW Snorkel S3219E Snorkel is a leading global manufacturer of aerial work platforms. Our comprehensive range of aerial lifts provides safe and efficient working at height, from 2 metres

More information

1. Cranes. 3. Hazardous Chemicals. 4. Signs. 2. Trenching and Excavations

1. Cranes. 3. Hazardous Chemicals. 4. Signs. 2. Trenching and Excavations A Safe Operation Safety Tips for Heavy Construction 1. Cranes Cranes are a common piece of equipment on heavy construction jobsites. Always perform a walk around inspection before and after each shift

More information

A Product of Hard Work MICRO EXCAVATOR

A Product of Hard Work MICRO EXCAVATOR A Product of Hard Work MICRO EXCAVATOR Compact, powerful, versatile Small enough to fit through doorways, strong enough to do the work of ten men. JCB Micro excavators are remarkable both for their compact

More information

A Product of Hard Work BACKHOE LOADER 1CX SERIES

A Product of Hard Work BACKHOE LOADER 1CX SERIES A Product of Hard Work BAKHOE LOADER X SERIES Big solution in a small package Superb manoeuvrability lets you operate in tight areas Wide choice of loader and backhoe attachments increases versatility

More information

A Product of Hard Work EXCAVATORS

A Product of Hard Work EXCAVATORS A Product of Hard Work EXCAVATOR You need an excavator for the toughest tasks They d be a lot tougher without a CB excavator CB manufacturing excellence The CB excavator range is a product of our drive

More information

AERIAL WORK PLATFORMS A E RIAL WORK PLATFORMS

AERIAL WORK PLATFORMS A E RIAL WORK PLATFORMS AERIAL WORK PLATFORMS A E RIAL WORK PLATFORMS W H E N YO U N E E D A L I F T, YO U K N O W I T M U S T B E A G E N I E. Genie sets the standard by which other lifts are judged. Simply put, we build a better

More information

Eminox Electronic Service Indicator

Eminox Electronic Service Indicator ESI Installation and Instruction Manual Eminox Electronic Service Indicator I n s t a l l a t i o n a n d I n s t r u c t i o n M a n u a l LITM004 ESI Installation and Instruction Manual Section Title

More information

BUILDING THE ULTIMATE RANGE.

BUILDING THE ULTIMATE RANGE. WHEEL LOADER RANGE BUILDING THE ULTIMATE RANGE. Ever since JCB was founded by Joseph Cyril Bamford in a small garage in Staffordshire in 1945, innovation has driven our machines and our thinking. Of course

More information

Australian Standard. Cranes, hoists and winches. Part 6: Guided storing and retrieving appliances AS AS

Australian Standard. Cranes, hoists and winches. Part 6: Guided storing and retrieving appliances AS AS AS 1418.6 2004 AS 1418.6 2004 Australian Standard Cranes, hoists and winches Part 6: Guided storing and retrieving appliances This Australian Standard was prepared by Committee ME-005, Cranes. It was approved

More information

Hire Sales Service Training

Hire Sales Service Training Hire Sales Service Training www.skyjacks.co.za Who We Are Company Profile SkyJacks is a leading supplier of access systems including aluminium scaffolding, suspended platforms and highly advanced hydraulic

More information

CMC MODEL60HD ARBOR PRO TECHNICAL DATA SPECSHEET

CMC MODEL60HD ARBOR PRO TECHNICAL DATA SPECSHEET CMC MODEL60HD + TECHNICAL DATA SPECSHEET 60HD+ UNIQUE FEATURES STANDARD FEATURES // AERIAL LIFT 62 working height Up to 38 lateral side reach 29.5 lateral reach when outriggers are in narrow position Capable

More information