Three Phase Flat Motors Three Phase Saw Arbor Motors. for sawing, milling, routing of wood, plastics and metal. type of protection IP 54

Size: px
Start display at page:

Download "Three Phase Flat Motors Three Phase Saw Arbor Motors. for sawing, milling, routing of wood, plastics and metal. type of protection IP 54"

Transcription

1 Thr Phs Flt Motors Thr Phs Sw Arbor Motors for swing, milling, routing of wood, plstics nd mtl of protction IP 54 Thr phs flt motors with br of protction IP 54 Thr phs flt motors of protction IP 55 (possibl on rqust) CSA vrsion (possibl on rqust) B

2 Thr-Phs Flt Motors for swing, drilling, routing of wood, plstics nd mchining of mtl of protction IP 54 Mchnicl dsign Thr-phs motor with squirrl cg rotor Owing to thir low profil th strong nd sthticlly dsignd flt motors grtly rduc th cutting dpth loss. Th mtril of th bring shilds nd housing in th individul sris r diffrnt nd r dscribd sprtly in th following prformnc tbls. Th brings of th shft consist of sufficint dimnsiond groov bll brings. Th driv nd bring is fixd br-ing, th vntiltor nd on is n unfixd bring. Th brings r to b rgrdd for norml instlltion conditions s dust-proof. Bcus of thir grsing for liftim th motor of sris KN 50, KN 60 nd KN 70 r fr of mintnnc nd grtly sy to oprt. On using ths motors for cutting of plstics nd mtl th brings r spcilly ndngrd by dust nd chips. For ths oprting conditions th brings cn b providd dditionlly, on rqust, with lbyrinth sls on th both nd shilds. This is lrdy rrngd s rgulr ftur for th sizs KN / KC 70..., K 11..., K 14..., K 16..., nd K 20. Th connction of trminl box r normlly situtd on th right on viwing on th shft nd, howvr, thy cn lso b instlld, on spcil rqust, on th lfthnd sid. Th ntris for cbls cn b rottd by 90 togthr with th trminl box, if rquird. Flt motors for ston woring r listd sprtly in sction C. Typ of protction IP 55 on rqust. Elctricl dsign Th motors r dsignd ccording to DIN EN / VDE 0530 prt 1 ruls. High qulity insulting mtril r usd for insultion. Th imprgntion is ffctd ccording to th ltst tchnology of vcuum procssing. Th thrml cpcity is conform to insultion clss "F". On rqust th motors cn lso b supplid with insultion for tropicl conditions. A powr rduction of ths motors will rsult if thos r instlld t coolnt tmprturs highr thn 40 C (104 F) or t hights xcding 1,000 m (3,2 ft) bov min s lvl. All motors cn b dsignd for diffrnt voltgs nd frquncis. For thos spcil pplictions it is rcommndd to nquir, spcilly, if it is ncssry to mt connction rgultions vlid brod. Most s r vilbl in CSA dsign (fil no. L.R ). Dpnding on th motors will dvlop pull-out torqus of pproximtly 250 to 350 % of th nominl torqu. Thrfor, th motors provid tmporry, strong ovrlod cpcity nd r dsignd spcilly for rough swing wors. On short priod utilistion of ths powr ps it is rcommndd to dimnsion th protction fuss nd th supply cbls ccording to th highr currnts mt in ths css. Pls inquiry in such css. B 26

3 Thr-Phs Flt Motors sw rbor motors of protction IP 54 with squirrl cg rotor spcil flt housing in luminium-di-cst mtl, bring shilds in gry cst iron lbyrinth sls on both nds voltgs: 400 V spcil voltg on rqust frquncy: 50 Hz output rting for insultion clss "F" high qulity vcuum imprgntion, high pull-out torqu nd high ovrlod cpcity mbint tmprtur 40 C (104 F), instlltion hight 1,000 m (3,2 ft) ovr min s lvl with intgrtd lctromchnicl br, s pg 33. spd 3,000 rpm continuous rting S1 intrmittnd rting S6 60% intrmittnd rting S6 40% full lod spd S1 wight sw bld flng drwing (W) 400 V c. A (W) 400 V c. A (W) 400 V c. A rpm c. g mm Ø KN KN KN KN KN KN KN KN KC KC KC KC KC ,730 2,730 2,730 2,810 2,820 2,820 2,820 2,820 2,860 2,860 2,870 2,870 2, MS 3087 MS 3087 MS 3087 MS 640 MS 640 MS 640 MS 640 MS 640 MS 652 MS 652 MS 652 MS 652 MS B

4 Thr-Phs Flt Motors sw rbor motors of protction IP 54 : KN 50 drwing without swflngs drwing No. MS 3087 clmping width for sw bld 0..6 mm trminl box right KN 50 KN 51 KN drwing without swflngs nd nut : KN 60 drwing No. MS 640 trminl box right stndrd vrsion without mchind surfc nd borings for fstning protction hood KN 60 KN 61 KN drwing without swflngs : KC 70 drwing No. MS 652 insid thrd ccording to ordr with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right KC 70 KC 71 KC stndrd vrsion: lft hnd thrd dimnsions subjct to chng B 28

5 Thr-Phs Flt Motors of protction IP 54 with squirrl cg rotor housing nd bring shilds in gry cst iron, for highr strsss in stl or stl wldd, with lugs for fstning protction hood s modls I rspctivly II, concrning K nd K housing nd bring shilds stl wldd output rting for insultion clss "F", high qulity vcuum imprgntion, high pull-out torqu nd high ovrlod cpcity. Th s blow r lso vilbl with intgrtd lctromchnicl br, s dditionl pg 35. voltgs: 400 V spcil voltg on rqust frquncy: 50 Hz drwing continuous rting S1 spd 3,000 rpm intrmittnd rting S6-60% full lod spd wight sw bld flng (W) 400 V c. A (W) 400 V c. A rpm c. g mm Ø K.19 2 K K K K K K K K K K K K.50 2 D K.50 2 D K D K.50 2 D MS 630 A MS 630 A MS 630 A MS 630 A MS 630 B MS 630 C MS 630 C MS 630 C MS 630 C MS 630 D MS 630 D MS 630 D MS 3503 MS 3503 MS 3503 MS ,820 2,820 2,820 2,900 2,900 2,925 2,925 2,925 2,940 2,940 2,940 2,950 2,950 2,950 2,950 2, spcil spcil spcil spcil drwing continuous rting S1 spd 1,500 rpm intrmittnd rting S6-60% full lod spd wight sw bld flng (W) 400 V c. A (W) 400 V c. A rpm c. g mm Ø K K K K K K K.49 4 D K.49 4 D MS 630 A MS 630 B MS 630 C MS 630 D MS 630 D MS 630 D MS 3503 MS ,420 1,440 1,440 1,470 1,470 1,470 1,470 1, spcil spcil 29 B

6 Thr-Phs Flt Motors of protction IP 54 : K drwing without swflngs drwing No. MS 630A clmping width for sw bld 0..6 mm stndrd vrsion: lft hnd thrd with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right K K 81 K 82 K : K drwing without swflngs drwing No. MS 630B clmping width for sw bld 0..6 mm with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right : K 110 clmping width for sw bld 0..6 mm drwing without swflngs nd nut drwing No. MS 630C with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right K 111 K 112 K stndrd vrsion: lft hnd thrd dimnsions subjct to chng B 30

7 Thr-Phs Flt Motors of protction IP 54 drwing without swflngs : K 140 drwing No. MS 630D clmping width for sw bld 0..6 with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right K 140 K : K D drwing No. MS 3503 trminl box right K D K 162 D : K.50 2 D drwing No. MS 3621 stndrd vrsion: lft hnd thrd dimnsions subjct to chng 31 B

8 Thr-Phs Flt Motors With Br Mchnicl dsign Thr-phs motor with squirrl cg rotor Intgrtd lctromchnicl br coold by th mountd vntiltor of th motor Switching on th motor th br is lso supplid with currnt. Its strong lctromgnt lifts th br plts nd rlss th motor for running. Whn switching off th motor th strong springs xisting in th br giv high br prssur on th friction discs nd bring th motor to stndstill. This is lso vlid in cs of powr filur s sfty br is usd hr. Elctricl dsign of th motor As dscribd on pg 26 Elctricl dsign of th br Conncting voltg: 230 V or 400 V onphs AC (ltrnting currnt). Th lctromgnt is dsignd for DC (dirct currnt) nd is fd by rctifir which is positiond in th trminl box togthr with th trminls of motor nd br. On-phs ltrnting currnt is ncssry for th fding. Normlly, this currnt is to b tppd off prlll from th motor trminl bord in ordr to contin th sm circuit of motor nd br nd thrfor utomtic intrction. Whn strting th motor vi Y/ -connction th currnt supply of th br hs to b gurntd lso whn switching protctivly to void prticulr sttus without voltg. If this is, howvr, not possibl s th voltg of th motor dvits too much from th rtd voltg of th br or if vribl voltg is usd for spd rgultion sprt powr supply is ncssry for th br. In this cs th usr hs to provid synchronous connction sttus (motor/br). Pls s for connction digrm. Importnt not Whn motor with br is usd s sw rbor motor, th sw bld togthr with th outsid flng nd nut would li to run forwrd bcus of th rottiv torqu, nd th nut would b loosnd from th thrd whn bring th motor. In this cs th nut hs to b scurd ginst unscrwing or through y hs to b fittd which lso scurs th outsid sw bld flng ginst loosning. Th sw bld thn hs to indict biggr boring dimtr s th shft dimtr nd hs to b positiond on spcr or corrsponding flng surfc. Pls considr tht th br is not suitbl s locing dvic for tool chng (sw bld chng). B 32

9 Thr-Phs Flt Motors With Br of protction IP 54 xtrmly flt housing in luminium cst iron, bring shilds in gry cst motor vrsion with lbyrinth sls on both sids voltg: 400 V, spcil voltgs on rqust frquncy: 50 Hz output rting for insultion clss "F" high qulity vcuum imprgntion, high pull-out torqu nd high ovrlod cpcity mbint tmprtur 40 C (104 F), instlltion 1,000 m (3,2 ft) ovr min s lvl with intgrtd lctromchnicl br, ctiv utomticlly whn switching off currnt supply, up to 7 rpm rtd spd (dpnding on, pls s). br torqu: KN 5: 4 Nm KN 6: 3 Nm KC 7: 16 Nm For th slction of th br switching frquncy, tool, momnts of inrti, spd, tc. r to b considrd! continuous rting S1 intrmittnd rting S6 60% full lod spd S1 wight sw bld flng drwing KN Br KN Br KN Br KN Br KN Br KN Br KN Br KN Br KC Br KC Br KC Br KC Br KC Br (W) 400 V c. A (W) 400 V c. A rpm c. g mm Ø 0, 1,10 1,20 1,50 1,85 2,20 2,50 3,00 3,00 4,40 5,50 7,00 7,50 2,1 2,9 3,2 3,3 4,0 4,8 5,6 6,7 6,5 9,0 11,0 14,0 15,0 0,90 1,30 1,50 1, 2,20 2,60 3,00 3,50 3,70 5,00 6,50 8,00 9,00 2,3 3,4 3,8 4,0 4,7 5,5 6,5 7,6 8,0 10,5 13,0 16,0 18, ,5 14,0 15,0 15,5 18,0 20,5 21,5 23,0 32,0 39,0 44,0 51,0 57,0 MS 645 MS 645 MS 645 MS 646 MS 646 MS 646 MS 646 MS 646 MS MS MS MS MS B

10 Thr-Phs Flt Motors With Br of protction IP 54 drwing without swflngs : KN 50 Br drwing No. MS 645 clmping width for sw bld 0..6 mm tool st Ø30h6 trminl box right KN 50 Br KN 51 Br KN 52 Br drwing without swflngs nd nut : KN 60 Br drwing No. MS 646 clmping width for sw bld 1..2,5 tool st Ø30h6 lft with borings for fstning protction hood (t dditionl cost) trminl box right KN 60 Br KN 61 Br KN 62 Br drwing without swflngs : KC 70 Br drwing No. MS clmping width for sw bld 1..4 tool st Ø60h6 with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right KC 70 Br KC 71 Br KC 72 Br dimnsions subjct to chng B 34

11 Thr-Phs Flt Motors With Br of protction IP 54 with squirrl cg rotor housing nd bring shilds in gry cst iron, from K 140 bring shilds in stl cst iron, with lugs for fstning protction hood ccording to vrsion I rspctivly II ginst dditionl pric, from s K nd K housing nd bring shilds stl wldd voltg: 400 V spcil voltg on rqust output rting for insultion clss "F" frquncy: 50 Hz intgrtd lctromchnicl br, ctiv utomticlly whn switching off currnt supply. Br torqu on rqust. drwing continuous rting S1 spd 3,000 rpm K.19 2 Br K Br K Br K Br K Br K Br K Br K Br K Br K Br K Br K Br K.50 2 D Br K.50 2 D Br K D Br MS 635 MS 635 MS 635 MS 635 MS 636 MS 633 C MS 633 C MS 633 C MS 633 C MS 631 MS 631 MS 631 MS 639 MS 639 MS 639 (W) 400 V c. A (W) 400 V c. A rpm c. g mm Ø 6,6 9,2 11,0 15,0 17,5 22,0 30,0 37,0 45,0 45,0 54,0 65,0 65,0,0, intrmittnd rting S6-60% 8,0 11,0 13,0 18,0 20,0 25,0 37,0 45,0 55,0 55,0 65,0 75,0 70,0 90,0, full lod spd wight sw bld flng 1 spcil spcil spcil drwing continuous rting S1 spd rpm intrmittnd rting S6-60% full lod spd wight sw bld flng (W) 400 V c. A (W) 400 V c. A rpm c. g mm Ø K Br K Br K Br K Br K Br K Br K.49 4 D Br K.49 4 D Br MS 635 MS 636 MS 633 C MS 631 MS 631 MS 631 MS 639 MS 639 6,2 9,5 20,0 22,0 30,0 40,0 50,0 60,0 13,5 20,0 38,0 43,0 57,0 76,0 88,0 105,0 7,5 11,0 24,0 26,0 35,0 45,0 55,0 66,0 16,0 22,0 45,0 50,0 63,0 84,0 95,0 114, spcil spcil 35 B

12 Thr-Phs Flt Motors With Br of protction IP 54 drwing without swflngs : K Br drwing No. MS 635 clmping width for sw bld 1-4 tool st Ø60h6 with mchind surfc nd borings for fstning protction hood (t dditionl cost) K Br K 81 Br K 82 Br K 83 Br drwing without swflngs : K 91 Br drwing No. MS 636 clmping width for sw bld tool st Ø60h6 with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right drwing without swflngs : K 110 Br drwing No. MS 633C on clmping width for sw bld tool st Ø60h6 with mchind surfc nd borings for fstning protction hood (t dditionl cost) trminl box right K 111 Br K 112 Br K 113 Br stndrd vrsion: lft hnd thrd B 36 dimnsions subjct to chng

13 Thr-Phs Flt Motors With Br of protction IP 54 drwing without swflngs : K 140 Br drwing No. MS 631 clmping width for sw bld K 140 Br K 141 Br : K Br drwing No. MS 639 trminl box right K Br K 162 Br ) Sw rbor motor s dscribd on pg 33 Th intgrtd brs in stndrd dsign hv th following br torqus: sris KN 5.. Br sris KN 6.. Br sris KC 7.. Br sris KN 7.. Br br torqu 4 Nm br torqu 3 Nm br torqu 16 Nm br torqu 17 Nm 2) Gnrl vlidity Th lctromchnicl br is to b chcd in ch cs of ppliction. Its stbility, i.. liftim of th br discs, is function of spd, switching frquncy nd momnts of inrti. To nbl budgtry chc, w s for informtion bout: spd (rpm) t which th br should bcom ctiv switching frquncy (switchs pr hour) momnts of xtrnl inrti (gm 2 ) Not Dsign of br stndrd vrsion: lft hnd thrd dimnsions subjct to chng 37 B

14 B 38

BEARINGS Ball & Socket Joints - DIN Left & Right (d 2 b )Handed : M5 - M16. Nut Supplied (ISO 4032) d1 d2 d2b d3 L a e l4 l2 L3 R

BEARINGS Ball & Socket Joints - DIN Left & Right (d 2 b )Handed : M5 - M16. Nut Supplied (ISO 4032) d1 d2 d2b d3 L a e l4 l2 L3 R l4 RAS l3 l2 d 2 Push/Pull SW (A/F) Bll & Sockt Joints DIN 7102 Lft & Right (d 2 b )Hndd : M 15 Front to Bck d 1 R 15 15 15 L Sid to Sid Nut Supplid (ISO ) RAS Typ: RIGHT HAND THREADED Stl (Zinc Pssivtd)

More information

New end mills with multiple internal holes for efficient flow of coolant. y

New end mills with multiple internal holes for efficient flow of coolant. y IMPACT MIRACLE nd mill with multipl intrnl through coolnt hols -MHV-CH -MHVRB-CH -SFPR-CH Sris -MHV-CH -MHVRB-CH -SVR-CH -MHV-CH -MHVRB-CH Nw nd mills with multipl intrnl hols for fficint flow of coolnt.

More information

제품문의 : SR Tech KALLER GAS SPRING 공식공급업체 100 ( xStroke ) K 500 x 25 mm Initial Force 500 dan 80 ( xStroke )

제품문의 : SR Tech KALLER GAS SPRING 공식공급업체 100 ( xStroke ) K 500 x 25 mm Initial Force 500 dan 80 ( xStroke ) www.rtech.o.kr 제품문의 : R Th 01-966-7017 KAER GA PRING 공식공급업체 Ovrviw - 00 F INIT < 70 3 3 13 ( 8 + 2xtrok ) TU 00 x 2 mm 100 ( 0 + 2xtrok ) K 00 x 2 mm 82 ( 32 + trok ) K 00 x 2 mm Initil For 00 dn Initil

More information

Sliding clamp, compact single acting with spring return

Sliding clamp, compact single acting with spring return Sliding clamp, compact singl acting with spring rturn adaptr Clamping block Prss bd Hydraulic clamping block Optimun adaptation in narrow construction spacs Applications: th compact sliding clamp is a

More information

Power Distribution Board SVS201-PWR (ControlPlex )

Power Distribution Board SVS201-PWR (ControlPlex ) Powr Distribution Board SVS20PWR (ControlPlx ) Dscription Togthr with th bus controllr CPC10 and th lctronic circuit protctor ESX50D-S1xx th powr distribution board typ SVS20PWR-xx forms th intllignt powr

More information

PFF SERIES FLANGED NETWORK PLASTIC BOX

PFF SERIES FLANGED NETWORK PLASTIC BOX PFF SERIES FLANGED NETWORK PLASTIC BOX Thnil Dt Prottion lss: IP40 Oprting tmprtur: -10 C ~ +60 C 1 Nw PF plsti s with wll mounting flng ottom dsign. Md of flm-rsistnt ABS UL94V-0 nd vill in off-whit olor.

More information

Leadership in Filtration. ENTARON XD/MD 40 High performance for high air flows

Leadership in Filtration. ENTARON XD/MD 40 High performance for high air flows Ladrship in Filtration XD/MD 40 High prformanc for high air flows 2 XD/MD 40 For nominal flow rats up to 40 m 3 /min XD 40 MD 40 MD 40 WITH DUALSPIN XT Applications Extrmly dusty applications Mobil applications,

More information

RX VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 380 l/min (22.8 m3/h) Head up to 13 m

RX VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 380 l/min (22.8 m3/h) Head up to 13 m RX -3-- Submrsibl pumps VORTEX Dirty wtr Domstic us Civil us PERFORMANCE RANGE Flow rt up to 30 l/min (. m3/) H up to 3 m APPLICATION LIMITS m mximum immrsion pt (wit sufficintly long powr cbl) Mximum

More information

Submersible DRAINAGE pumps

Submersible DRAINAGE pumps RX Submrsibl DRAINAGE pumps Clr wtr Domstic us Civil us PERFORMANCE RANGE Flow rt up to 300 l/min (18 m3/) H up to 20 m APPLICATION LIMITS m mximum immrsion pt (wit sufficintly long powr cbl) Mximum liqui

More information

Model GOM. G-O-Motor Spring or Spring-less Type Piston Cylinder Actuator OVERVIEW SPECIFICATIONS. No. SS (Rev.

Model GOM. G-O-Motor Spring or Spring-less Type Piston Cylinder Actuator OVERVIEW SPECIFICATIONS. No. SS (Rev. No. SS2-8210-0200 (Rv.6) G-O-Motor Sprin or Sprin-lss Typ iston Cylindr ctutor Modl GOM OVRVIW Th G-O-Motor is pnumtic ctutor tht turs compct in siz, powrul in output nd lon stro. G-O-Motors hv wid rn

More information

rotary parallel pneumatic gripper

rotary parallel pneumatic gripper rotary parallel pneumatic gripper Major Benefits High grip force to weight ratio Two body and jaw styles with a total of four sizes available both imperial and metric versions Sprg assist on open or close

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF30-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF30-30-00-13 Product ID: 1SBL277001R1300 EAN: 3471523111233 Catalog

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF16-30-10-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF16-30-10-13 Product ID: 1SBL177001R1310 EAN: 3471523110632 Catalog

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF52-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF52-30-00-13 Product ID: 1SBL367001R1300 EAN: 3471523132337 Catalog

More information

A V 50Hz / V 60Hz

A V 50Hz / V 60Hz A12-30-10 415-440V 50Hz / 440-460V 60Hz Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: A12-30-10 415-440V 50Hz / 440-460V 60Hz

More information

FITTINGS FOR SPECIAL APPLICATIONS ECCENTRIC JUNCTIONS AND TRANSITION PIECES

FITTINGS FOR SPECIAL APPLICATIONS ECCENTRIC JUNCTIONS AND TRANSITION PIECES FITTINGS FOR SPECIAL APPLICATIONS ECCENTRIC JUNCTIONS AND TRANSITION PIECES 2 Th md-to-msur solution for spil rquirmnts!.. Fittings with/without sokt.. Connting pips with/without sokt... Inflow pip sizs

More information

General Information. Ordering. Popular Downloads. Dimensions. Technical

General Information. Ordering. Popular Downloads. Dimensions. Technical AFS16Z-30-22-30 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AFS16Z-30-22-30 Product ID: 1SBL176082R3022 EAN: 3471523158399

More information

Pressure measurement Index

Pressure measurement Index Indx nrl informtion pg Introduction 577 Sizs for surfc mounting front flng, dsord 580 Diprgm gug connction flngs 581 nrl 582 Product informtion Bourdon tu prssur gugs pg Brss prssur lmnt 583 Plstic cs

More information

Roller and ball bars for easy and safe die change

Roller and ball bars for easy and safe die change Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension

More information

UPS Pure Sinewave UPS

UPS Pure Sinewave UPS UPS Pure Sinewve UPS USR S MANUAL 1.6K / 3.2K / 5KVA 6.4K / 8K/ 10KVA 1. INTRODUCTION 1. 1.1 Generl Description This UPS, powerful ll-in-one solution, delivers unsurpssed clen true sine wve output power

More information

General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS

General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT

More information

DIFFERENTIAL PRESSURE GAUGE DIAPHRAGM OPERATED

DIFFERENTIAL PRESSURE GAUGE DIAPHRAGM OPERATED DIRNTIL PRSSUR U DIPRM OPRTD OST - R SPCIL TURS M PPROVD NCLOSUR I OPRTIN PRSSUR UP TO 100 bar SIMPL ND COMPCT DSIN COST CTIV RLIL PPLICTIONS ILTRS, YDRULIC SYSTMS, WTR TRTMNT PLNTS, CMICL PLNTS, NTURL

More information

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN

More information

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,

More information

WORKING INSTRUCTIONS INSTALLATION AND REPAIR TERMINAL Birsta SafeEnd

WORKING INSTRUCTIONS INSTALLATION AND REPAIR TERMINAL Birsta SafeEnd Datum: 205-09- Rev: WORKING INSTRUCTIONS INSTLLTION ND RPIR TRMINL Introduction is a Terminal that is tested according prn 37-7, performance class T0. The typical installation process is subdivided in

More information

Selection of pressure gauges The bowl is covered with a transparent bowl guard! Square embedded type pressure gauge.

Selection of pressure gauges The bowl is covered with a transparent bowl guard! Square embedded type pressure gauge. Modular F.R.L. Units ttr visibility & nvironmntal rsistanc Doubl layr dsign RoHS Slction of prssur gaugs Th bowl is covrd with a transparnt bowl guard! Intrchangability Intrchangabl with th prvious R sris

More information

BKF Off-line filter / cooler unit

BKF Off-line filter / cooler unit BKF Off-lin filtr / coolr unit Compact dsign Filling function optional (BKF 18/3) Easy installation Low- nois pump DIN filtr lmnts Efficint plat hat xchangr DE 38 1/14 Pag 1/6 Bühlr Tchnologis GmbH D -

More information

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB) Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl

More information

SIZES FROM 1,950-25,000 Nm BACKLASH FREE ELASTIC JAW COUPLINGS

SIZES FROM 1,950-25,000 Nm BACKLASH FREE ELASTIC JAW COUPLINGS K Z SIZS FROM 1,950-25,000 Nm BCKLSH FR LSTIC JW COUPLINGS LSTOMR COUPLINGS K Z Optional: GNRL INFORMTION BOUT R+W LSTOMR COUPLINGS: SRVIC LIF When properly selected, handled, and installed, these couplings

More information

Air Combination Air Filter + Regulator + Lubricator. AC20-A to AC40-A. How to Order. Description. Rc NPT 1/8 1/4 3/8 1/2 3/4

Air Combination Air Filter + Regulator + Lubricator. AC20-A to AC40-A. How to Order. Description. Rc NPT 1/8 1/4 3/8 1/2 3/4 ourtsy of /lodyn/ydradyn otion ontrol ydraulic Pnumatic Elctrical chanical (8) 26-8 www.cmafh.com I ymbol w r t y L ot ) Option ttachmnt mi-standard 3 Thrad typ a b c d f g h 2 Port siz ir ombination ir

More information

Steam-converting Valve Type DUP. and spray water valve

Steam-converting Valve Type DUP. and spray water valve Stam-convrting Valv Typ DUP and spray watr valv Application Stam-convrting valv for powr stations and industrial plants combind with a spray watr valv in on unit Inlt: DN 40 a NPS 1½ a 20 PN 16 a 630 Class

More information

VELAN COMPANY PROFILE

VELAN COMPANY PROFILE VL-GPV-27 VLN COMPNY PROFIL Velan is one of the world's leading manufacturers of industrial steel valves, supplying gate, globe, check, ball, butterfly and knife gate valves for critical applications in

More information

Hydraulic cylinders type CH - square heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

Hydraulic cylinders type CH - square heads with counterflanges to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar) www.atos.com Tabl 0-9/ Hydraulic cylindrs typ - squar hads with countrflangs to ISO 600- - nominal prssur 6 MPa (60 bar) - max 5 MPa (50 bar) SWC Cylindrs Dsignr Softwar for assistd slction of tos cylindrs

More information

Speed Controller with One-touch Fittings

Speed Controller with One-touch Fittings In-lin Typ 4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. Controlld

More information

MEDIUM DUTY, HEAVY DUTY, COMPACT ROUND,

MEDIUM DUTY, HEAVY DUTY, COMPACT ROUND, CYLINDRS MDIUM DUTY, HVY DUTY, COMPCT ROUND, NON-ROTTING ROD, ND ISO/VDM SRIS CV ISO/VDM CYLINDRS INDX: Series CRS Pages - to -6 Series CTS Pages - to - Series, V, HV /", ", & -/8" ore Pages C- to C-7

More information

TA25DU0.4 Overload Relay a. Features. Descriptions

TA25DU0.4 Overload Relay a. Features. Descriptions 3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures

More information

E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A

E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.

More information

Hydraulic cylinders type CK - square heads with tie rods to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar)

Hydraulic cylinders type CK - square heads with tie rods to ISO nominal pressure 16 MPa (160 bar) - max 25 MPa (250 bar) www.atos.com Tabl 7-/ Hydraulic cylindrs typ CK - squar hads with ti rods to ISO 600- - nominal prssur 6 MPa (60 bar) - max MPa (0 bar) SWC Cylindrs Dsignr Softwar for assistd slction of tos cylindrs &

More information

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated.  Replaces HA /2009 Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009

More information

16. Package Information for Stratix II & Stratix II GX Devices

16. Package Information for Stratix II & Stratix II GX Devices 16. Packag Information for Stratix II & Stratix II GX vics SII52010-4.3 Introduction This chaptr provids packag information for Altra Stratix II and Stratix II GX dvics, including: vic and packag cross

More information

Speed Controller with One-touch Fittings

Speed Controller with One-touch Fittings 4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. mounting DIN

More information

631 ALLOWANES AND TOLERANCES

631 ALLOWANES AND TOLERANCES 631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce

More information

Accessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562

Accessories. Inlet nozzles 550. Guard grilles 553. Lead connections, capacitors 558. Terminal boxes, air filters 562 Accessories Generl informtion Inlet nozzles 550 Gurd grilles 553 Led connections, cpcitors 558 Terminl boxes, ir filters 562 Speed setting, motor protection switch, third-prty ccessories 564 Technology

More information

GIGABIT MAGNETIC JACK 1x1 LED

GIGABIT MAGNETIC JACK 1x1 LED GIGIT MGNTI JK x L MOLX -XXXX WW YY Z FRONT VIW NON L VRSION P/N -00 NOTS: - SHIL MTRIL: STINLSS STL (GROUN PINS R SOLR IPP) - PLSTI MTRIL: PT, LK, UL V-0 - RJ TRMINLS MTRIL: OPPR LLOY ONTT PLTING: 0.

More information

EK TX. SIZES FROM ,000 Nm BACKLASH FREE ELASTOMER INSERT COUPLINGS GENERAL INFORMATION ABOUT R+W ELASTOMER COUPLINGS: SPECIAL SOLUTIONS

EK TX. SIZES FROM ,000 Nm BACKLASH FREE ELASTOMER INSERT COUPLINGS GENERAL INFORMATION ABOUT R+W ELASTOMER COUPLINGS: SPECIAL SOLUTIONS K TX SIZS FROM 0.5-25,000 Nm BKLS FR LSTOMR INSRT OUPLINGS LSTOMR OUPLINGS K TX Optional: GNRL INFORMTION BOUT R+W LSTOMR OUPLINGS: SRVI LIF When properly selected, handled, and installed, these couplings

More information

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007 Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button

More information

LKP LINKEPENG BEARING

LKP LINKEPENG BEARING LKP LINKEPENG BEARING JIASHAN LINKEPENG BEARING CO., LTD PBG-Bushing Soid Luricting Inid Bring Contnts PBG100. Oiss Guid Bushs PBG280. Oiss Guid Bushs with cor Pg 02~03 Pg2~12 PBG200. Oiss Guid Bushs with

More information

Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2

Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2 & - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best

More information

tel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves

More information

SINGLE ROD Pneumatic. Major Benefits

SINGLE ROD Pneumatic. Major Benefits SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy

More information

JUMO MIDAS S05 OEM pressure transmitter - universal

JUMO MIDAS S05 OEM pressure transmitter - universal Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:

More information

TF General Information. Ordering. Dimensions. Popular Downloads. Technical

TF General Information. Ordering. Dimensions. Popular Downloads. Technical TF42-7.6 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF42-7.6 Product ID: 1SAZ721201R1040 EAN: 4013614398117 Catalog Dscription:

More information

TF General Information. Ordering. Dimensions. Popular Downloads. Technical

TF General Information. Ordering. Dimensions. Popular Downloads. Technical TF65-47 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF65-47 Product ID: 1SAZ811201R1004 EAN: 4013614482946 Catalog Dscription:

More information

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1. Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description

More information

TRUCK TYRES RANGE SAFEGUARD THE ENVIRONMENT WITH KORMORAN ISO CERTIFIED FACTORIES REGROOVABILITY AND RETREADABILITY.

TRUCK TYRES RANGE SAFEGUARD THE ENVIRONMENT WITH KORMORAN ISO CERTIFIED FACTORIES REGROOVABILITY AND RETREADABILITY. SAFEGUARD THE ENVIRONMENT WITH KORMORAN TRUCK TYRES RANGE ISO 14001-CERTIFIED FACTORIES All KORMORAN proucts r mnufctur in ISO 14001-crtifi fctoris in Europ. In ition to th rn s qulity strtgy, this nvironmntl

More information

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique

More information

PIMag High-Load Linear Stage

PIMag High-Load Linear Stage PIMag High-Load Linar Stag High Prformanc and Cost Efficincy, Linar Motor V-412 Width 116 mm Travl rang to 610 mm Nominal forc 33 N Incrmntal or absolut linar ncodr Prcision rcirculating ball barings,

More information

PIglide AT3 Linear Stage with Air Bearings

PIglide AT3 Linear Stage with Air Bearings PIglid AT3 Linar Stag with Air Barings High Prformanc Nanopositioning Stag A-123 Idal for scanning applications or highprcision positioning Clanroom compatibl Siz of th motion platform 210 mm 210 mm Travl

More information

IEC 309 RANGE PLUGS AND SOCKETS TO IEC 309 STANDARDS

IEC 309 RANGE PLUGS AND SOCKETS TO IEC 309 STANDARDS IC 309 RNG PLUGS ND SOCKTS TO IC 309 STNDRDS TCHNICL CHRCTRISTICS 1 SL / 3 SL - RPID SSMLY ND WIRING PLUGS ND SOCKTS RFRNC STNDRDS The IC 309 SL industrial plugs and sockets meets the dimensional, construction-performance

More information

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006 Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny

More information

MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1441 Page 1441.

MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1441 Page 1441. MOTOR SPD PRODCT LIN: SRIS 495, 495 Section 44 Page 44. Issue TL OF CONTNTS Features & enefits...2 Standard Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4 Mounting

More information

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02 CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................

More information

HSB series the heavy-duty connectors

HSB series the heavy-duty connectors HS series the hevy-duty connectors HS series the hevy-duty connectors The HS series provides users with 3 A vi ech contct with screw connections for sfe nd relile connection. Technicl dt Stndrds / pprovls

More information

K Series. 360 screening for full EMC shielding high packing density for space savings rugged housing for extreme working conditions.

K Series. 360 screening for full EMC shielding high packing density for space savings rugged housing for extreme working conditions. K K sris connctors hav bn spcifically dsignd for outdoor applications. Thy includ an innr slv and two sals to prvnt pntration of solids or liquids into th housing formd by th plug, fr sockt, fixd sockt

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt

More information

Mechanical Fail-Safe Damper Actuator NFA

Mechanical Fail-Safe Damper Actuator NFA 2-FON echnicl Fil-Sfe Dmper Actutor NFA ctutor emergency function for djusting ir dmpers in ventiltion nd ir conditioning systems in uildings orque Nm Nominl voltge AC 24..4V / DC 24..V Control: Open-close

More information

System 6 Quickfit-Expando Connectors

System 6 Quickfit-Expando Connectors Connctors Systm Faturs A fac boring connctor family for 32mm systm drilling with full rang of panl and application variants for all cabint manufacturing applications Minimum drilling rquirmnts Linar cam

More information

POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch

POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel

More information

Description Individual Reduction Gearbox Model: 2:60mm Gear Type: GN:Helical Gear Reduction Ratio: 3:1 to 200:1 Bearing Type: K:Ball Bearing

Description Individual Reduction Gearbox Model: 2:60mm Gear Type: GN:Helical Gear Reduction Ratio: 3:1 to 200:1 Bearing Type: K:Ball Bearing 6-10W ist of Motor Chrcteristics No od od Prmeters Prmeters Model of Motor Voltge Power Speed Current Speed Torque Current Brush ife Motor Weight V W RPM A RPM m A H kg. Z2D06-12 12 6 00 0.6 Mx. 2950 19

More information

4 POL 4 POL 8 POL 8 POL. CONNECTOR SPECIFICATION / Steckverbindungs-Eigenschaften L =[mm] see table TABLE 1

4 POL 4 POL 8 POL 8 POL. CONNECTOR SPECIFICATION / Steckverbindungs-Eigenschaften L =[mm] see table TABLE 1 POL 0.0 L =[mm] see table. POL 0/0/0 00 URGR 0/0/0 RUNS NO: RWN: HK': PPR: RV M x.. M x. POL POL ONNTOR SPIFITION / Steckverbindungs-igenschaften 0V / VOLTG RTING/etriebsspannung 0V / FORMT: tb-prod- RVISION:

More information

MATERIAL SPECIFICATIONS STYLE PG THREE-HOLE RECTANGULAR STYLE PG STYLE PG THREE-HOLE RECTANGULAR

MATERIAL SPECIFICATIONS STYLE PG THREE-HOLE RECTANGULAR STYLE PG STYLE PG THREE-HOLE RECTANGULAR ROMC HRNSS S HRNSS : STM 36 Steel, profile shape cut with plasma arc or oxy-fuel. Holes plasma arc cut or drilled. Stainless steel optional. TI-S: ll Thread Rod. lloy steel per STM 193 Grade 7. Stainless

More information

MixMate series the high-capacity connectors

MixMate series the high-capacity connectors MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design

More information

Plug-in connectors for power electronics

Plug-in connectors for power electronics Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT Plug-in

More information

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2 Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.

More information

Cable Trolleys for C-Rails Program

Cable Trolleys for C-Rails Program Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble

More information

Natal Iron and Brass Foundry cc Reg. No. 1987/018590/83

Natal Iron and Brass Foundry cc Reg. No. 1987/018590/83 Ntl Iron n Brss Founry Rg. No. 1987/018590/83 Hyworth Ro M Konni Pitrmritzurg P.O. Box 221 Luxmi 37 033-386 6572 / 3 / 6 Fx: 033-386 7001 -mil:ni@mw.o.z Founrs in Frrous n Non Frrous Mtls n Pttrn Mkrs

More information

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4 Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt

More information

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1) Generl informtion should e used to reduce the lod on the motor windings, s well s to reduce the cpcitive lekge currents to PE tht my e cused y the use of long motor cles. A motor filter is required: if

More information

ALLMATIC HD EXTREMELY ROBUST AND RELIABLE

ALLMATIC HD EXTREMELY ROBUST AND RELIABLE 20 ALLMATIC HD EXTREMELY ROBUST AND RELIABLE For mor tn 40 yrs now, ALLMATIC HD s n wtwor for rliility. Its stury sin fftivly mks it liftim invstmnt. 21 HD mnil 22 ALLMATIC HD MECHANICAL MECHANICAL HD

More information

4/2- and 4/3-way shut-off valve

4/2- and 4/3-way shut-off valve Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure

More information

Tractor - Setup Instructions

Tractor - Setup Instructions Trtor - Stup Instrutions WARNING AVOID SERIOUS INJURY OR DEATH: R n follow th trtor oprtor mnul for running ngin. Not: Follow th prours tht pply to your mol. Trtor Mols Mowr Mols 69595 4 69098 69596 69099

More information

ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800

ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800 Fcts nd figures ALLROUNDER 12 T Tble dimeter: 12 mm Clmping force: 8, 1, 16, 2 kn (cc. to EUROMAP): 7, 1, 17, 29, 4, 8 www.rburg.com 12 T Mchine dimensions up to 1 kn 385 1) 323 2) 3545 3) 366 4) 391 5)

More information

Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers

Screwdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used

More information

EK-X Technical Data vertical order pickers EK-X

EK-X Technical Data vertical order pickers EK-X @ Tchnical Data vrtical ordr pickrs vrtical ordr pickr This spcification sht to VDI guidlin 2198 only givs th tchnical figurs for slctd quipmnt variants. Othr Elctric-ngin Prformanc data Dimnsions Tyrs/chassis

More information

SE Encore Multimount Worm Gear Speed Reducers

SE Encore Multimount Worm Gear Speed Reducers S ncore Worm ear Speed Reducers VILL IN 24 HOURS! Winuard lack poxy Coating System Quill Input daptor Solid Output Shaft(s) (Standard Diameter) Hollow Output Shafts (Max Standard ore) ushing Kits ase Kits

More information

50Hz HORIZONTAL MULTISTAGE PUMPS

50Hz HORIZONTAL MULTISTAGE PUMPS ORIZONTL MULTISTG PUMPS INDX Stainless Steel orizontal Multistage Pump................................................................ 2 General Product Curves..................................................................................

More information

MBF Series. Xe nâng Pallet chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50. Frame and body

MBF Series. Xe nâng Pallet chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50. Frame and body MBF Sris X nâng Pallt chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50 Top quality dosn't nd to com at a high pric. Our low-cost hand pallt - trucks giv you vrything you nd to do th job - plus a

More information

13. Package Information for Stratix Devices

13. Package Information for Stratix Devices 13. Packag Information for Stratix vics S53008-3.0 Introduction This data sht provids packag information for Altra dvics. It includs ths sctions: Sction Pag vic & Packag Cross Rfrnc.....................

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted

More information

CLASSIC PRODUCTS. increase productivity Reduce downtime Reduce scrap SUPERIOR VALUE

CLASSIC PRODUCTS. increase productivity Reduce downtime Reduce scrap SUPERIOR VALUE increase productivity Reduce downtime Reduce scrap SUPRIOR VLU www.phdinc.com 1-800-6-8511 CLSSIC PRODUCTS catalog 006 cylinders rotary actuators powered slides grippers accessories www.phdinc.com 1-800-6-8511

More information

ISOMETRIC VIEW SCALE: 1/2

ISOMETRIC VIEW SCALE: 1/2 NOTS:.. THIS RWING SRIS TH UL xx SRIS LTRONI UL PUMP. UNLSS OTHRWIS SPII, LL VIWS R MOLS -c, -c OR -c. TURS INLU: - THR PHS RUSHLSS MOTOR WITH NOYMIUM MGNTS - INTGRT LTRONIS WITH SP ONTROL - WT MOTOR SIGN,

More information

Switches and Indicators 14

Switches and Indicators 14 Switchs and Indicators 14 14 Switchs and Indicators Indx Sris 14 Dscription Pag 331 Product Assmbly Pag 332 Product Rang - pushbuttons for standard mounting - pushbuttons for flush mounting - accssoris

More information

OHIO MODEL MC-1A AUTO/MANUAL DROP MAGNET CONTROLLER

OHIO MODEL MC-1A AUTO/MANUAL DROP MAGNET CONTROLLER OHIO MODEL MC-A AUTO/MANUAL DROP MAGNET CONTROLLER DESCRIPTION Th MC-A Controllr is hvy duty mgnt ontrollr usd for mgnts whos old urrnt rngs from 20 A to 00 A d. Cold urrnt rfrns th urrnt flowing through

More information

COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL

COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE

More information

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see Technical data) Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533

More information

Series Bloom TM Hydraulic Speed Reducers Standard Features. Hydraulic Speed Reducer. Powerful Compact Efficient

Series Bloom TM Hydraulic Speed Reducers Standard Features. Hydraulic Speed Reducer. Powerful Compact Efficient Series 1200 Hydraulic Speed Reducer The rugged construction and versatility of the Series 1200 Speed Reducer is ideal for stationary & mobile applications where slow speed, high torque, or variable speed

More information

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6 4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used

More information

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273 Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd

More information

Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x

Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,

More information

DESCRIPTION OHIO MODEL MC-1A AUTO / MANUAL DROP MAGNET CONTROLLER INSTALLATION PROCEDURES INSTALLATION, MAINTENANCE, AND PARTS BULLETIN

DESCRIPTION OHIO MODEL MC-1A AUTO / MANUAL DROP MAGNET CONTROLLER INSTALLATION PROCEDURES INSTALLATION, MAINTENANCE, AND PARTS BULLETIN DESCRIPTION OHIO MODEL MC-A AUTO / MANUAL DROP MAGNET CONTROLLER Th MC-A Controllr is hvy duty mgnt ontrollr usd for mgnts whos old urrnt rngs from 20 A to 00 A d. Cold urrnt rfrns th urrnt flowing through

More information