Stationary power chuck Dividing head / Tailstock
|
|
- Horatio Pearson
- 5 years ago
- Views:
Transcription
1 Stationary power chuck Dividing head / Tailstock 10/2015
2
3 Contents: Stationary power chuck type SPA, pneumatic...4 Stationary power chuck type SPA, round, pneumatic...5 Stationary power chuck type SHP, pneumatic...6 Stationary power chuck type SHH, hydraulic...7 Spring power chucks type FSP...8 FN manual dividing head...9 Mounting plate for FN dividing head...10 FN round table...11 FN tailstock...12 Turo tailstock Typ REM...13 Turo tailstock Typ RES...14
4 Stationary power chuck type SPA, pneumatic The stationary power chuck is ideal for work that does not require any division of the part. The double-action stationary pneumatic chuck can be used for both vertical and horizontal applications. Positive locking by collet chucks ensures that parts are clamped securely without deformation. Use: Vertical and horizontal Operating pressure: 3-6 bar A1 E G B C1 C2 D C C2 A1 A N B1 B2 N Collet type F12 (113E) F27 (147E) F38 (164E) F48 (173E) F66 (185E) A A B B B C C1 0/ C D E M 8 M10 M 12 M 12 M 12 G G 1/8 G 1/4 G 1/4 G 1/4 G 1/4 N H Clamping force at 6 bar 4.3 kn 16 kn 18 kn 18 kn 32 kn Order No technical subject to change
5 Stationary power chuck type SPA, round, pneumatic The stationary power chuck is ideal for work that does not require any division of the part. The double-action stationary pneumatic chuck is designed for vertical applications only. Positive locking by collet chucks ensures that parts are clamped securely without deformation. Use: Vertical Operating pressure: 3-6 bar B B1 4x90 2x G A Nute C F F Collet type F12 (113E) F27 (147E) F38 (164E) F48 (173E) F66 (185E) A B B C E M 8 M 10 M 12 M 12 M 12 F G G 1/8 G 1/4 G 1/4 G 1/4 G 1/4 Slot H Clamping force at 6 bar 4.3 kn 16 kn 18 kn 18 kn 32 kn Order No technical subject to change 5
6 Stationary power chuck type SHP, pneumatic Stationary pneumatic clamping chuck for System Hainbuch size 42 and 65 clamping heads. The air can be optionally supplied through lateral union pieces or O-rings in the bottom part. The chuck is protected by internal clamping springs that assist the clamping force and ensure that the clamping force is retained in the event of a loss of air. Body made of aluminium, wearing parts made of hardened and ground steel. Chuck heads Gr. 42 Gr. 65 Centering Z170 / Z220 Z170 / Z250 A A B B1 6 x M6 6 x M6 C C E F P H P1 h R S 8 x M10 8 x M10 T Max. clamping pressure bar 7 7 Maximum axial tension kn Order No technical subject to change
7 Stationary power chuck type SHH, hydraulic Hydraulic stationary clamping chuck for System Hainbuch size 42 and 65 clamping heads. The air can be optionally supplied through lateral union pieces or O-rings in the bottom part. The chuck is protected by internal clamping springs that assist the clamping force and ensure that the clamping force is retained in the event of a loss of pressure. Body made of aluminium, wearing parts made of hardened and ground steel. Chuck heads Gr. 42 Gr. 65 Centering Z115 / Z170 Z140 / Z200 A A B 6 x M6 6 x M6 C C E F P H P1 h R S 4 x M10 4 x M10 T Max. clamping pressure bar Maximum axial tension kn Order No technical subject to change 7
8 Spring power chucks type FSP - For vertical and horizontal applications - Spring-action clamping, hydraulic opening - Also available as modular system for grid 30/40/50 for all grid plate systems ø D ø E G 12 øe B H ø A F J K J L K Type FSP-F12 FSP-F16 FSP-F28 FSP-F35 FSP-F48 A B C D E F G M8 x 1 M8 x 1 M10 x 1 M10 x 1 M10 x 1 H Weight Order No Cylinder mount and thread can be supplied for any grid system 8 technical subject to change
9 FN manual dividing head Technical features: With manual quick-set, for vertical and horizontal applications - Standard divisions: 2/3/4/6/8/12/24 - Subdivisions set rapidly and simply by adjusting the limit stop - Cast iron body, dividing plates made of hardened and ground steel - Division tolerance: 2 - Impact tolerance of conical seat: 0.02 mm - Parallelism to base plate: 0.02 mm - Rectangularity and axis parallelism to mounting surface 0.02 mm - Precision of the scroll chuck: mm Standard accessories: - Sliding blocks - Fixing screws Morsekegel Morse Taper Cône morse Size Height of centers A B C D d Morse taper E H F G H K K K L Order No. with cast iron chuck Order No. without chuck Other dividing plates on request technical subject to change 9
10 a Mounting plate for FN dividing head G D h C H B A F E Size A B C H E F G M10 M10 M12 M16 H J Weight kg Order No technical subject to change
11 FN round table Technical features: Universal round table with hand wheel for direct and indirect division. Suitable for vertical and horizontal applications. - Hardened and ground worm and Morse cone - Radial run-out of Morse taper 0.01 mm - Parallelism of table surface 0.02 mm - Worm gearing can be disconnected - Direct divisions 2/3/4/6/8/12/24, with T-slots - Scale 360 on table circumference with adjustable zero setting H F G A D MK L B E C Dimension / D A B C E F G 4 x 10 4 x 10 4 x 12 4 x 12 6 x 14 H L Morse taper Weight kg Order No Adapter plate steel for round table ø for 3-/4-Jaws Chuck Order No technical subject to change 11
12 FN tailstock Cast iron housing Clamping on the left, inc. 60º half peak L F MK H K C E A B Size Height of centers A B C H E F Morse taper Weight kg Order No technical subject to change
13 Turo tailstock Typ REM Steel housing Tailstock manual with hand wheel Clamping on the left as standard, optionally on the right. MK /100 B 0.01/100 B H Sph 0.01/100 A E F 13 A H6 B 100 Sph H E F Stroke Order No Other height of center or pneumatic version on request technical subject to change 13
14 Turo tailstock Typ RES Steel housing Tailstock manual with hand wheel Pressure applied by spring force Clamping on the left as standard, optionally on the right. für Auswerfer 60 MK-2 ca /100 B 0.01/100 B E H SpH 0.01/100 A F A B 20H6 100 Sph H E F Stroke ca. 15 ca. 20 ca. 20 ca. 20 ca. 20 ca. 20 ca. 20 Order No Other height of center or pneumatic version on request 14 technical subject to change
15
16 FN NIEDERHAUSER AG Allmend 39 CH Sempach phone 0041 / (0) / fax 0041 / (0) info@niederhauser.ch /
Collet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationAutomatic Positioning System APS
Automatic Positioning System APS 0 MODULES pag. 0. 2 CLAMPING PINS pag. 0. 5 / 0. 8 PLATES pag. 0. 9 PLATES FOR 5 AXIS pag. 0. 13 ANGLE PLATE pag. 0. 21 TOMBSTONES pag. 0. 26 CRANKWEBS pag. 0. 30 STEEL
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationTaladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS
RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationZERO-POINT CLAMPING SYSTEM
simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point
More informationAutomatic Positioning System APS
Automatic Positioning System APS 0 MODULES page 6 CLAMPING PINS page 12 PLATES page 13 TOMBSTONES page 18 CRANKWEBS page 22 STEEL SMOOTH PLATES page 24 STEEL PLATES WITH GRID page 25 FLANGES FOR INDEXING
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationDesign principle / Technical features
Design principle / Technical features Components and construction groups IV 4 Stationary opening unit - Construction group IV. Non-rotating distributor. Non-rotating housing. Housing, axial movable Power
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationAxis Modules pneumatic
Axis Modules pneumatic Axis Modules XY-Compensation Order no. Stroke XY-Ebene Handling weight Page ± [mm] recommended [kg] Product Information 6 XY70 3 6 10 XY100 5 12 12 XY160 8 30 14 XY220 10 150 16
More informationTel VIT VIT VIT VIT VIT VIT VIT VIT-300
VIT-450-1 VIT-600-1 2 PCS HIRTH Coupling VIT-450-5 VIT-600-5 VIT-800-5 VIT-1000-5 VIT-1200-5 300x300 450x450 600x600 700x700 800x800 1000x1000 1200x1200 140 170 200 220 280 300 340 - ø30 ø40 ø40 ø60 ø60
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationTel
30 20 10 60 0 60 H B g ed e A H1 A1 VSC-5A SUIT FOR BS-0 OR HV-6, VUT-6, VU-150 VSC-6A SUIT FOR BS-1 OR HV-8, 10, VUT-6, VU-200 VSC-7A, 8A SUIT FOR BS-2 OR HV-10, 12, 14, VUT-10, 12 VSC-10A SUIT FOR HV-14,
More informationPERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationtesting and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationCentres-Live Chucks Type
Centres-Live Chucks Type 300-422 Face Drivers Type 300-303 with mechanical compensation 2 4 5 6 7 3 8 9 1 Very large bearing surface. Housing moves with centre to compensate for diefferent sizes of component
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
More informationLaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform
LaserTurn 1 Laser Machining System Highly integrated linear/rotary motion platform Pneumatically-actuated collet closer supports 0.1 mm to 7.9 mm O.D. materials with frictionless rotary union Clear aperture
More informationFEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES
FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES The Supertec GU CNC series are designed for grinding complex workpieces in small and large batch productions as well as individual parts. It is built
More informationEROWA MTS The EROWA MTS modular workholding system.
EROWA MTS The EROWA MTS modular workholding system. Reduce set-up time! System solutions from one single source EROWA MTS The flexible zero point palletizing system for production. Vertical Machining Centers
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationMeasuring and testing equipment. Run-out testers Comparator stands Small measuring instruments
Run-out testers Comparator stands Small measuring instruments Benennung Artikel-Nr. Run-out testers Height of centres 50 mm height of centres 75 mm Benzing run-out testers consist of a base plate, a pair
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationKST 16 KST 16V KST 25 KSS 25V KSS
F KST 16V shown KSS 32 shown 186 Industrial Drill Presses KST KSS Rigid table (KST) and column drill presses (KSS) with large work tables Specifications KST 16 KST 16V KST 25 KSS 25V KSS 32 drilling capacity
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationmechanics Rotational units made by isel Torquemotor ird B-90 RDH-M RDH-S RDH-XS DSH-S RF 1 Rotary tilting unit Indexing table B-88 B-92 B-94 B-96 B-98
Overview Torquemotor ird B-90 RDH-M Indexing table / Rotary unit B-92 RDH-S Indexing table / Rotary unit B-94 RDH-XS Indexing table / Rotary unit B-96 DSH-S Rotary tilting unit B-98 RF 1 Indexing table
More informationQUICK-CHANGE 5-AXIS WORKHOLDING
QUICK-CHANGE 5-AXIS WORKHOLDING THE 5-AXIS WORKHOLDING SOLUTION Top Tooling Connect directly to the Quintus Quick-Change Riser Blank Fixture Plate 5-Axis Vise Multifunction Fixture Plate Quintus Quick-Change
More informationADVANCED. Grips & Attachments.
www.worldoftest.com/gaugegrips.htm Qualitest grips and attachments are integral components of testing systems, designed for a wide range of tension, compression, and torque applications. These grips and
More informationThe product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
More informationMulti-Purpose Milling Machine
Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationDRILL CHUCKS AND ARBORS
DRILL CHUCKS AND ARBORS ABOUT US We are leading manufacturer of Geared Type Drill Chucks with s and Arbors since 1944 - manufacturing wide range of our products in various sizes. We manufacture them under
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationNEW POWER-OPERATED CENTERING VICES. Economic and automated clamping with maximum clamping forces and reduced interfering contour
NEW POWER-OPERATED CENTERING VICES Economic and automated clamping with maximum clamping forces and reduced interfering contour POWER-OPERATED CENTERING VICES The new power-operated centering vices have
More informationAutomatic Drilling and Tapping Units
Automatic Drilling and Tapping Units Contents Page Automatic drilling and tapping units... 25 Dimension sketches... 23 Introduction More mechanization in your drilling operations Simple and cost effective,
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationmechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216
Overview RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 D 2 Indexing Table B 218 MD 1 Midget Rotary Axis B 220 ZR 20 Indexing
More informationWhat are the functions of gears? What is gear?
8//0 hapter seven Laith atarseh are very important in power transmission between a drive rotor and driven rotor What are the functions of gears? - Transmit motion and torque (power) between shafts - Maintain
More informationCONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationStraight Drills. ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions
Screwdriving Technology Automation Air Motors Air Tools Straight Drills ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions Our line of drills are especially
More informationMarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post
More informationCX 4 Heavy Duty Precision CNC Lathe
X 4 The X Series heavy duty precision N lathe by Kingston is designed for heavy and long work pieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstock
More informationThe best in your hands
The best in your hands ALBRECHT Precision Drill Chucks Okay: The best drill chuck in your hands those are pretty strong words. However, we are sure of this. When we invented the self-tightening drill chuck
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationUniversal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More information1 Collets and collet sleeves
1 1.3 Wibemo - Honing sleeve 1.4 Wibemo - Extenso collets 1.6 Wibemo - Croco collets 1.10 Wibemo - CuBe collets 1.11 Wibemo - Phenol collets 1.12 Custom made collets 1.18 Wibemo - Wifex collets 1.22 Tornos
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationTyphoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
More informationTWIST DRILLS AND COUNTERBORES
TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationwww.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
More informationmechanics RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100
Overview RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100 DSH-S Rotary tilting unit 2-102 RF 1 Indexing table 2-104 2-94 Overview
More informationLaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform
LaserTurn 1 Laser Machining System Highly integrated linear/rotary motion platform Pneumatically-actuated collet closer supports 0.1 mm to 7.9 mm O.D. materials with frictionless rotary union Clear aperture
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationCMZ Machinery Group, S.A.
High perfomance from within TA 15 TA 20 TA 25 TA 30 TA 15M TA 20M TA 25M TA 30M TA 15S TA 20S TA 25S TA 30S TA 15MS TA 20MS TA 25MS TA 30MS TA 15Y TA 20Y TA 25Y TA 30Y TA 15YS TA 20YS TA 25YS TA 30YS Excellent
More informationM E T A L W O R K I N G
M E TA LW O R K I N G 2009/2010 JET: 50 years of experience 50 years of high-quality machines 1958 The foundation of JET The flight with the first Boeing jet aeroplane from Seattle (USA) to Japan with
More informationMATSUMOTO and NEIDLEIN maintain a partnership for the production and supply of face drivers, live centers, and dead centers on a worldwide basis.
ULTRA-LIVE CENTERS DEAD CENTERS MATSUMOTO and NEIDLEIN maintain a partnership for the production and supply of face drivers, live centers, and dead centers on a worldwide basis. NEIDLEIN live centers and
More informationCNC Ultra High Precision. UHP-Turn 450. High precision spindle precision of = <0.8 µm
CNC Ultra High Precision UHP-Turn 45 High precision spindle precision of =
More informationIndexing chucks Shaft chucks Column chucks
Pull-down chucks ompensating chucks Indexing chucks Shaft chucks olumn chucks Page 100 Page 102 Page 10 Page 106 Page 108 TSF- TSR- Self centering Self centering Pull-down chucks Ø 170-650 mm tongue &
More informationSCHMIDT PneumaticPress
Maximum pressing force from 1.6 kn to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
More informationmechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162
Overview RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 DSH-S Rotary Swivelling Unit C 164 RF 1 Indexing Table C 166 D 1 Rotary
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationHandwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationVALVE REPAIR MACHINES. VM7000 Repair a safety valve in about the same time it would take to remove the damaged valve.
VALVE REPAIR MACHINES FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA VM6000 Repair in-line valves with 2.5-13 inch (63.5-330.2 mm) diameter pressure seal bores The Model VM6000 Portable
More informationTECHNICAL CHARACTERISTICS
GEARBOX WM 26 8 Nm TECHNICAL CHARACTERISTICS Worm gearbox. Life-time lubrication by grease, therefore it is main tenance-free. Housing. Die-casting aluminium. Worm-shaft. Hardened steel with grinding.
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE
More informationHACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE
HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR
More informationMechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
More informationTyphoon B Series CNC Turning Centres
Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More information