Cardan Shaft Coupling
|
|
- Mae Harvey
- 6 years ago
- Views:
Transcription
1 Crdn Shf Couping 55
2 Crdn Shf Couping GF Series 21 R < 3,2µm imension ppy o unighened unis. Type d w* M c Fnge M Numer of kg mm knm mm mm mm mm mm mm mm os** Nm os** G F , ,3 M5 x ,5 24 0, ,24 G F , ,5 M6 x ,9 24 0, ,33 G F , ,8 M6 x ,2 30 0, ,66 G F , , M8 x ,2 40 0, ,80 G F , M8 x ,8 50 1, ,54 G F , , M10 x ,6 60 3, ,24 G F , ,5 M12 x ,4 70 6, ,52 56 Furher sizes on reques. Technic chnges o e reserved wihou noice. ** Fnge hoes, o size nd o quniy my e vrin (dependen on he seer of he crdn shf). Fnge os: Grde 12.9 : M16 nd upwrds wih wshers: IN EN ISO 7416 When ordering pese se : e. g. GF x 60 x A (Type x Ø d w x mode) ddiion: f nge hoes, o size nd o quniy if vrin from cogue
3 Crdn Shf Couping GF Series 22 imension ppy o unighened unis. Type d w* M Tighening M c Fnge M Quniy kg mm knm os** Nm mm mm mm mm mm mm mm os** Nm of os** G F M , M14 x , G F M M16 x , G F M M18 x , G F M M20 x , G F M M22 x , G F M M22 x , G F M M24 x , G F M M27 x , Furher sizes on reques. Technic chnges o e reserved wihou noice. ** Grde 10.9; Fnge hoes, o size nd o quniy my e vrin (dependen on he seer of he crdn shf). For ighening os M16 nd upwrds re used wih wshers (IN EN ISO 7416). When ordering pese se: e. g. GF x 90 x A (Type x Ø d w x mode) ddiion: f nge hoes, o size nd o quniy if vrin from cogue 57
4 Crdn Shf Couping GF Series 23 imension ppy o unighened unis. Type d w* M Tighening M c Fnge- M Quniy kg mm knm os** Nm mm mm mm mm mm mm mm os** Nm of os** G F M , ,5 M14 x , G F M M16 x , G F M M18 x , G F M M20 x , G F M M22 x , G F M M22 x , G F M M24 x , G F M M27 x , Furher sizes on reques. Technic chnges o e reserved wihou noice. ** Grde 10.9; Fnge hoes, o size nd o quniy my e vrin (dependen on he seer of he crdn shf). For ighening os M16 nd upwrds re used wih wshers (IN EN ISO 7416). When ordering pese se: e. g. GF x 150 x A (Type x Ø d w x mode) ddiion: f nge hoes, o size nd o quniy if vrin from cogue
5 Mouning nd Remov Insrucions for Crdn Shf Couping Before mouning Type GF 21 Afer mouning Type GF 21 Mouning The STÜWE crdn shf coupings GF re suppied redy o e mouned. Series 21 wih ighening os Series 22 nd 23 wih ighening os, wihou f nge connecing os. Therefore hey shoud no e dismned prior o empoying he uni for he fi rs ime. 1. egrese f nge ore, shf, nd fron of ocking uni nd crdn shf. o no ighen he ighening os efore he shf is mouned. 2. Push f nge ono he shf. 3. Tighen he ighening os. I shoud consider he foowing: Wih series 21 he ocking uni nd he crdn shf wi e conneced in singe pss. Wih series 22 nd 23 ighening screws hve o e ighened in he fi rs pss. In he second pss he crdn shf hs o e mouned wih f nge connecing os. Approch: 3.1 Tighen four os eveny disriued over he circumference y reduced orque (pprox. 50 o 70 % of mximum ighening orque). 3.2 Aferwrds ighen ighening os uniformy, one y one, over sever revouions wih he mximum orque uni he ouer ring his he inner ring nd uni he os cn no e ighened wih he mx. orque nymore. 3.3 Check ech ighening o wice for he required ighening orque. ismouning This is simir o mouning. 1. Wih series 22 nd 23 fi rs remove f nge connecing os nd he crdn shf. 2. oosen ighening os uniformy nd one y one, iniiy no more hn qurer urn per o. Under no circumsnces shoud he ocking os e compeey removed s his coud e dngerous nd resu in injury. 3. Shoud he ouer ring, when oosing he os, no side uomicy from he inner ring, his cn e ssised y removing hose ocking os djcen o he pped hoes provided for jcking purposes nd screwing hem ino hese pped hoes (ony series 22 nd 23). 4. ismoun shf or pu off f nge. Remove rus which my hve formed on he shf in fron of he ocking uni. Cening nd gresing ismouned crdn shf connecing f nges do no hve o e ken pr nd re-uriced efore remouning. The conic surfces hve o e cened nd regresed ony if empoyed in diry environmen. Use soid uricn wih high conen of MoS 2 nd coeffi cien of fricion of µ = 0,04 o urice he conic surfces. Exmpes: uricn Source Moykoe 321 R (onded coing) Aem-So MO 84-K (onding coing) Moykoe G Rpid + (pse) Aem-So M 19 P (pse) ow Corning A.C. Mhes ow Corning A.C. Mhes The os re uriced wih commerciy vie o uricns. 59
Series VCHC MPa Check Valve 06 G VCHC40 TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. How to Order. Specifications AS-FE KE
Ma Check Valve Series How o Order Using NSF-H cerified grease for he guide ring (sliding) secion Symbol Improved durabiliy in high- environmens by using a polyurehane elasomer poppe 06 G or size 06 3/4
More informationC6 RS6 Front Steel Brake Disc/Pad/Caliper Change
C6 RS6 Fron Seel Brake Disc/Pad/Caliper Change This PDF is spli ino 3 secions as follows Remove/Fi Brake Pads Remove/Fi Brake Caliper & Disc Torue figures These procedures are aken from Elsawin, he Audi
More informationXSz 8... XSz 50 Solenoid actuated fail-safe safety valve
> > /-way or size: G /4... G, /4... NT > > ouble valve conrol sysem, inherenly failsafe wihou residual pressure > > ynamic self monioring > > For use wih pneumaic cluch and brake sysems and oher -way safey
More informationC560 Electronic Time Relays
C560 Elecronic Time Relays Conens Ordering Deails Mono-funcion Elecronic Time Relays... /4 Muli-funcions Elecronic Time Relays... /5 Accessories for Elecronic Time Relays.../5 Technical Daa Technical Daa.../6
More informationThread Milling. Tool Systems.
www.mimaic.de 2017 The affordable sysem wih high performance allows hreading and / or circlip grooving in high precision. The polygonal connecion of inser and milling body improves he efficiency and precision
More informationCentering Rings (Aluminium AW-6082-T6 / Stainless Steel ) with O-Ring (CR/FPM (FKM)) d s. d 2. d 1
Centering Ring (Auminium AW-6082-T6 / Stine Stee 1.4301) wit O-Ring (CR/FPM (FKM)) 2 1 1 2 Orering Informtion Auminium/FPM (FKM) Auminium/CR Stine tee/fpm (FKM) 1) 1 2 Orering Informtion Auminium/FPM (FKM)
More informationNote t Metal glow plugs are always fitted in the 2.7 ltr. common rail engine.
Removing and insalling glow plugs Page 1 of 5 Removing and insalling glow plugs Noe Meal glow plugs are always fied in he 2.7 lr. common rail engine. Two differen ypes of glow plugs are fied in he 3.0
More informationCutting and Turning Tools
Cuing and Turning Toos Our Company Specia Cuing Toos Circuar- and Thread Miing Toos Cuing and Turning Toos Driven Toohoders for CNC Machining Ceners Driven Toohoders for CNC Turning Machines Mui-Spinde
More informationIndex. General Information 5-6. Technical Information. 1-pole terminal boards. 2-pole terminal boards. 3-pole terminal boards. 4-pole terminal boards
Terminal Blocks Index Page General Informaion Technical Informaion pole erminal boards pole erminal boards 3pole erminal boards pole erminal boards pole erminal boards ype KL...K ype K M (acc. o DIN )
More informationDOUBLETRACK 990XT PARTS INCLUDED G F I Q T Y Z. part description part number qty. 1 O. 4 lever / levier / palanca 4 Q 4 R 4 T.
DOUBLETRACK 990XT PARTS INCLUDED C B K N A U V W X L M D R E J O P H S G F I Q T Y Z prt description prt numer qty. A B C D E F G H I J K L stinger & ckone ssemly ike tue & wheel holder ssemly upright
More informationWORM GEAR SPEED REDUCERS
WOM GE SPEED EDUCES PECSON QULY SYLE E MULPLE OS SPEEDS UP O rpm MEL: Housing - luminum lloy, Black nodized Shafts - nput - Carbon Steel, ntegral with Worm Polished -Hand hreads Bearings - nput - Ball
More informationB 220. B Compact FA PSS Type
-3-2.1 ompct PSS ype eetures In orer to respon quicky to wie rnge of nees, NSK keeps en-efector recircution system screws, which offer high-spee n ow-noise opertion n compct esign, in stnr stock s the
More informationINSTALLATION AND OPERATION MANUAL
INSTALLATION AND OPERATION MANUAL 2-Ton Hydraulic Folding Shop Crane Model: RSC-2TF PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU
More informationElectronic timer CT-MKE Multifunctional with 1 thyristor
Daa shee Elecronic imer CT-MKE Mulifuncional wih 1 hyrisor The CT-MKE is a mulifuncional elecronic ime relay. I is from he CT-E range. The CT-E range is he economic range of ABB s ime relays and offers
More informationFRICTIONAL CONNECTIONS CATALOGUE
FRICTIONAL CONNECTIONS CATALOGUE Reprinting and all other forms of copying, not even partially, is prohibited without permission from Stüwe. Maschinenfabrik GmbH & Co. KG Production: Studio Salewski GmbH,
More informationSeries S0700 Plug-in Manifold Stacking Base Manifold Optional Parts
Series S0700 lug-in Manifold Sacking Base Manifold Opional ars Blanking plae SS0700-0A- I is used by aaching on he manifold block for being prepared for removing a valve for mainenance reasons or planning
More informationSumitomo Electric Carbide, Inc. DFC Milling Cutter Series
CAT.FCBROCHURE.3/18 Sumitomo Eectric Cride, Inc. FC Miing Cutter Series GS Chipreker Expnsion Improved chip contro for shouder miing High Efficiency, 90 Miing Cutter High Performnce oue-sided 6 Edge Inserts
More informationIFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
More informationElectrohydraulic pumps
+ () 699959 Elecrohydraulic pumps RE 1 1/. 1/7 Replaces: RE 1 1/3.1 EHP Nominal volage (DC):...11 V Size of pump: 1...22.5 cm 3 /rev Table of conens Conen Page Ordering code 2 Program overview Technical
More information8200/ Hexalobular / TORX. Efficient assembly
8200/13.02 Hexaobuar / TORX Efficien assemby Hexaobuar / TORX Torx (Engish Torque) is he bran name for a screw-rive profie in muicircuar shape. I is hane as a furher eveopmen of he crosse so an hexagon
More informationBroadband Plate Beamsplitters
Brodbnd Ple 5:5 spli Idel for CW unble lsers or lser diodes quliy subsres splier These hin film bemspliers re designed o work 45 degrees incidence nd o provide n equl spli beween he rnsmied nd refleced
More informationIFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
More informationSolenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
More informationPrecision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
More informationPRODUCT DEsCRIPTION. optibelt ZR TIMINg belts IsO 5296
opi ZR TIMINg belts srucure Bel layer ension cord ooh Fabric Fabric In order o obain a low level of wear on he running surfaces as well as achieving a high level of oohear srengh, a ough, wear resisan
More informationNew Higher Pressure Rating
New igher Pressure Raing Specificaions Sizes: " 8" Modes: anged (ANSI) Connecion Ony ever and Weigh Opion Bodies: I-PVC, and Seas: EPDM, KM, PTE Sea: EPDM, KM, PTE Sandard eaures (Sizes " 8") Minimum fow
More informationMANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts
MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions
More informationCard Edge GENERAL SPECIFICATIONS
Card Edge GENER SPECIFICTIONS INT MTERIS Plating U/CU File Number: CGE COE: 54453 ECCN: ER99 INTERNTION HRMONIZE COE: MECHNIC : : EECTRIC Operating WV: Current Rating: : ENVIRONMENT Operating Temperature:
More informationPins and Bushes. Oil-less Standard Die-set Press Fit Pin and Bush.
Oil-less Standard ie-set Press Fit Pin and ush Hales self-lubricating die components offer industry self-lubricating, maintenance-free performance resulting in overall cost savings and operational safety.
More informationIndustrial buffer. RINGFEDER Friction Spring
RINGFEDER Fricion Spring Indusrial buffer Fricion Spring RINGFEDER can also be supplied as complee indusrial buffers. A range of approved smaller buffer ypes are shown in he able a page 22. Cusomized versions
More informationFlat Products. Check our website for the latest technical information.
Flat Products www.daytonlamina.com Check our website for the latest technical information. BE OF CONENS Introduction... 3 -Gibs Bronze-Plated, Inch... 4 V-Gibs Bronze-Plated, Inch... 5 -Gibs Solid-Bronze,
More informationLOW PROFILE POWER UNITS 10 to 30 Gallon Reservoir Capacity L O W P R O F I L E P O W E R U N I T S
OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity O W R O F I O W R U N I S 74 OW ROFI OWR UNIS to 30 Gallon Reservoir Capacity ow rofile ower Units are designed for use in locations where space is at a
More informationH Pin Voltage Surveillance with Time-out. Features. Typical Operating Configuration. Description. Pin Assignment. Applications.
EM MICELECTNIC-MIN S -Pin olage Surveillance wih Time-ou Feaures Proper microprocess resar afer power up Process rese a power down n-chip oscilla gives a ypical P of 60 ms ese oupu wking down o.6 No exernal
More informationCATALOGUE PIPE SUPPORTS
CTOGUE B R T IN SIN C E 1 9 2 4 G 90 YERS ST E RU CE T PIPE SUPPORTS O F PIPE SUPPORTS - PICTORI INEX PIPE SUPPORTS The Unistrut pipe support systems covers an extensive range of hangers, pipe clips, pipe
More informationSTRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP
SIGH UNNING CHINS with low noise accumulation rollers Series BP 821 - BP 8257 - BP 831 46 48 SIDFXING CHINS with low noise accumulation rollers Series BP 878 B - BP 879 M BP 882 B - BP 882 M 49 52 PPICION:
More informationp max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
More informationElectronic relays. Timing. Timing
Elecronic relays Descripion C56x iming relays are snapped direcly ono a 35mm DIN rail safely and easily in accordance wih DIN VDE 50 022. Assembly and disassembly can be performed wihou complicaions or
More informationBALL BEARING UNITS SET SCREW TYPE PILLOW BLOCKS CAST HOUSING UCP2 SET SCREW TYPE FLANGED UNITS CAST HOUSING UCF2
ERIG UIT ET CREW TYPE PIOW OCK CT OUIG UCP haf Diameer 90 8 / 3 / ET CREW TYPE FGED UIT CT OUIG UCF haf Diameer 90 88 UCF / 3 / haf Diameer 90 94 / 3 / 76 77 . COTRUCTIO The K bearing uni is a combinaion
More information2" - 64" DUCTILE IRON MECHANICAL JOINT COMPACT FITTINGS
GENER SPECIFICIONS MERI: Ductile Iron per SM 536 PRESSURE: ESING: 350 PSI rating for 2" - 24" sizes, 250 PSI rating for 30" - 48" sizes and 150 PSI rating for 54" - 64" sizes In accordance with NSI/WW
More informationProduct Name -High Positioning Accuracy Disc Clamping- -High Rigidity Disc Clamping- Page
Coupings oors or Servo oors or Servo oors Coupings oors Produc Name -High Posiioning ccuracy isc Camping- -High Rigidiy isc Camping- Page 963 963 or Servo oors or Servo oors or Servo oors -Ura High isc
More informationScreed flush duct systems
creed flush duc sysems creed flush duc eavy-duy floor duc A04-A16 A18-A21 A umeric index creed flush duc sysems Fla head apping screw A16 K ens head screw A16 U UDF levelling suppor A14 UK boom piece A18
More informationAccessories. Unidirectional Flow Control DRV
Unidirectional Flow Control DRV Technical data - Body: Aluminium - Seals: NBR - Springs: Stainless steel - Internal parts: Brass OT58 - Operating pressure: 2 to 10 bar (DRV75B, DRV100B: vacuum 0.2 to 10
More information2/2 MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Series
MOTORISE VALVES sainless seel body hreaded pors, /8 / / / Series 9 FEATURES High flow due o angled sea design Aniwaerhammer design (fluid enry under he disc) Acuaor roaable hrough 6 In opion closing of
More informationMNPV6 REV A DISCO 4X FINAL ASSY
NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More informationTKA SERIES Chip-Tight Tube Series
TKA55 Corporae Headquarers U.S. Tsubaki Power Transmission, LLC 301 E. Marquard Drive Wheeling, IL 60090 Tel: (800) 33-7790 Fax: (847) 459-95 www.ussubaki.com Roller Chain Division 81 Main Sree Holyoke,
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationMOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Translucent polyamide (PA) PA66, GB 30% (ball fibre reinforced)
MOTORISE VALVES sainless seel body hreaded pors, /8 - / - / / Series 90 FEATURES High f due o angled sea design Ani-waerhammer design (fluid enry under he disc) Acuaor roaable hrough 60 Mainaining posiion
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationAccessories HS - Hydraulic speed regulators for cylinders to ISO standard Ø
ccessories HS - Hydraulic to ISO 5552 standard Ø 40 00 DESCRIPTION Hydraulic regulators series HS assure a constant speed of pneumatic cylinders during their working cycle. In fact in the control of tools,
More informationWÜPLAST WÜPLAST. WÜRTH Industrie Service. Screws for thermoplastics. Screws for thermoplastics DE EN
WÜPLAST Screws for hermoplasics WÜRTH Indusrie Service DE EN WÜPLAST Würh Indusrie Service GmbH & Co. KG Indusriepark Würh, Drillberg 97980 Bad Mergenheim T +9 79 31 91-0 F +9 79 31 91-000 wueplas@wuerh-indusrie.com
More informationInstruction Bulletin. MASTERPACT MP, MF and MC Circuit Breakers
nsrucion Bullein 48049-071-03 01/2002 Cedar Rapids, A, USA MASTERPACT MP, MF and MC Circui Breakers Reain for fuure use. MASTERPACT MP, MF and MC Circui Breakers 48049-071-03 nsrucion Bullein 01/2002 NOTCE!
More informationINTERCHANGEABLE BUSHINGS
INTERCHNGEE Index SECTION PROUCT PGE INEX................................................................................... - USHING TYPES..........................................................................
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationQuadra-Powr X Spring Diaphragm Actuators. Installation, Maintenance and Operating Instructions
Quadra-Powr X Spring Diaphragm ctuators Installation, Maintenance and Operating Instructions IMO-215 en 8/2017 2 IMO-215 en able of Contents 1 GENERL... 3 1.1 WRNING...3 1.2 Handling Quadra-Powr X ctuators...3
More informationHaitian Mars II Series. Series. Haitian Mars. Specifications / Europe
Haiian Mars II Series Haiian Mars Series Specificaions / Europe Mars Series STANDARD equipen Mars Series ECO pack Mars Series UNIVERSAL pack : Copac five poin oe syse, new desin Open and cose (ax. 5-saed,
More informationFlow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
More informationImpact Wrench Features
24 Impact Wrench Features Ease of service Simple piece construction for ease and speed of servicing. Durable steel clutch housings (zinc option on some models). Output Options lutch Options Desoutter have
More informationMPH Maximum pressure 10 bar F l o w r a t e s t o l / m i n
MPH Maximum pressure bar F l o w r a t e s t o l / m i n 6 echnical data housing (Materials) Head: luminium: MPH ---- nodised luminium: MPH 6-8 Painted luminium: MPH 66 Cover: Nylon: MPH --- luminium:
More informationFlow rates to 3000 l/min
MPH Maximum pressure bar Flow rates to l/min echnical data housing (Materials) Head: luminium: MPH nodised luminium: MPH 68 Painted luminium: MPH 66 Cover: Nylon: MPH luminium: MPH nodised luminium: MPH
More informationCurrent Sensing Chip Resistors
FEURES SURFCE MOUNE 0805, 1206, 2010 ND 2512 CSE SIZE O RESISNCE ME SRI CONSRUCION RECISON OERNCE (±1%) ED & REE CKGING FOR ESY ICK ND CE REFO COMIE SECIFICIONS ype EI Size Material (See Note on EMF Characteristics
More informationFlow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
More information228 River Avenue, Cochrane, Alberta, Canada T4C 2C1 thisisant.com
of 8 9. Messge Summry Clss PC Inerfce Funcion Refer Secion # Config. Messges Unssign Chnnel Assign Chnnel Chnnel I Chnnel Period Serch Timeou Chnnel RF Se Nework Trnsmi Power I Lis Add I Lis Config Chnnel
More informationMPH Maximum pressure 10 bar F l o w r a t e s t o l / m i n
MPH Maximum pressure bar F l o w r a t e s t o l / m i n 6 echnical data Filter housing (Materials) Head: luminium: MPH ---- nodised luminium: MPH 6-8 Painted luminium: MPH 66 Cover: Nylon: MPH --- luminium:
More informationINSTALLATION AND OPERATION MANUAL
INSTALLATION AND OPERATION MANUAL 12,000 Pound capaciy SURFACE MOUNTED full-rise SCISSOR LIFTS Models: XR-12000 xr-12000a IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Please read THE ENTIRE CONTENTS
More informationRéducteur à renvoi d angle. Dynabox
Réducteur à renvoi d angle Dynabox www.rosier.fr 4 SAR/SOP SERVICE S5 - Calculate acceleration torque on gearbox output : C2acc = C1accxix x1x2 1 and 2 : correction factors as per following chart. GEARBOX
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationE & G Tools (M) Sdn Bhd Tel : / Fax :
E & G Tools (M) Sdn Bhd Tel : 03-78044210/03-78044202 Fax : 03-78044212 Email : egtools@gmail.com 245 PNEUMTIC TOOS PNEUMTIC TOOS S o m e t i m e s i m m i n e n t s u c c e s s i s i n t h e a i r. O
More informationHYDROSTATIC STEERING UNITS AND ACCESSORIES
HYDOSIC SEEING UNIS ND CCESSOIES CONENS age Hydrostatic Steering Units ype XY.../1, 2... Hydrostatic Steering Units ype HKU.../, 4...5 Hydrostatic Steering Units ype HKU.../7...6 Hydrostatic Steering Units
More informationKeyless Locking Devices
Keyless ocking evices IC 100 IC 100 s N/ 2 17 47 20 26 6 16 260 31 104 18 47 20 26 6 16 280 31 104 19 47 20 26 6 16 290 31 104 20 47 20 26 6 16 310 31 104 22 47 20 26 6 16 340 31 104 24 50 20 26 6 16 370
More informationTESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
More informationRESERVOIR PRESSURE ESTIMATION USING PTS DATA. Rodolfo Belen Jr., Zim Aunzo, Cal Strobel, and Phil Mogen
PROCEEDINGS, Tweny-Fourh orkshop on Geoherma Reservoir Engineering Sanford Universiy, Sanford, Caifornia, January 25-27, 1999 SGP-TR-162 RESERVOIR PRESSURE ESTIMATION USING PTS DATA Rodofo Been Jr., Zim
More informationClamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
More informationFUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)
FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................
More informationPrecision Universal Joint
Precision Universl Joint PREISION UNIVERSAL JOINT Sit universl joints with plin or neele roller erings E - H (IN 808) Of this series oth single n oule joints re ville. s E re with sliing ushes while type
More informationHYDRAULIC JACKS & TOOLS
HYDRULIC JCKS & TOOLS 323 Hydraulic jacks & ools Table of conens Page characerisic of his force-oriened hydraulic Hydraulic cylinders, single-acing program is he operaing pressure which can be as high
More informationEXTERNAL MANIFOLDS & VALVE MOUNTING EXAMPLES
EXERNL MNIFOLDS & VLVE MOUNING EXMLES C + SD02 SCKLE VLVES C + NG3 MICRO LOCKS & VLVES SD00 1.2 1.1 0 1 C O SD02 SCKLE VLVE CONVERER 2.2 2.1 3.2 3.1 4.2 4.1 2 3 4 5 X.1 side port X.2 side port (only version)
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationLOAD REDI LIFT TABLES. l Light Duty. l Medium Duty. l Portable. l Tilt
LIFT TABLES l Ligh Duy l Medium Duy l Porable l Til TILT TABLES Beech Til Tables are designed for muliple applicaions enabling he work o be posiioned up o degrees, decreasing he need for workers o srech,
More informationTHE CALCULUS OF LPG TOROIDAL FUEL TANK SCREWS
The 3 rd Inernaional Conference on DIAGNOSIS AND PREDICTION IN MECHANICAL ENGINEERING SYSTEMS DIPRE 1 Consanin ONESCU, Nicolae POPA Universiy of Pieşi, ROMANIA mihai.boan@ugal.ro, consanin.georgescu@ugal.ro
More informationSI54.21-W-0013A Service Information: New functions in base module MODEL 930, 932, 933, 934
SI54.21-W-13A Service Informaion: ew funcions in base module 23.1.3 n he ACTS, models 93-934 a series of new funcionaliies - PT daa have been inegraed ino he base module (A7). eques and feedback of PTs
More informationSize d Grain # AC No. mm in mm in mm in. Size. mm mm mm
Accessories SANING ISCS FOR ANGLE AN VERTICAL SANERS AC No. Grain # s mm in mm in P-5 125 5 22.2 7/8 14~60 FG-5PX-1 P-6 150 6 22.2 7/8 14~60 FA-4CHK-3, 3F FA-150K-2, 3 FA-6C-9, 9M P-7 180 7 22.2 7/8 14~60
More informationHenan Star Machine Co.,Ltd
Henan Star achine Co.,td Cast Iron Sheaves We provide the whole series of t bore (3V, 5V, 8V.). hey are made of high-grade GG25 cast iron with delicate finish and assembled with high precision. hey can
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
More informationThread Milling Tool GWF
Thread Milling Tool GWF Thread milling >Ø20 mm Spiral flued solid carbide ools, some wih face cuer and fron chamfer This offers he following main advanages compared o he convenional mehods of apping and
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationPNEUMATIC SINGLE ACTING LINEAR ACTUATOR
PNEUMIC SINGLE CING LINER CUOR series P SERVOVLVE spa Via Quasimodo 27-20010 S.SEFNO ICINO (MI) PHONE: 0039-029748461 FX: 0039-0297484646 E-mail: servovalve@servovalve.it P Rev. 2/10 SINGLE CING SERIE
More informationINSTALLATION AND OPERATION MANUAL
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS MANUAL
More informationn Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationHydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,
More informationGet Ready for the Lesson
Lesson 4 5 Frctions nd Decimls Get Redy for the Lesson 1) How do you write frction s deciml? 2) Wht is 4/10 s deciml? Title Pge Get Redy Dy 2 Get Redy Answer: 1) A few wys divide, or chnge the denomintor!
More informationVDC Series High-Pressure Type Variable Volume Vane Pump
V SRS PRSSUR TYP VARA VU VA PUP V Series igh-pressure Type Variabe Voume Vane Pump eatures q ighy efficient and stabe high-pressure operation nnovative pressure contro and pressure baance mechanisms combine
More informationAWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
More informationLoad Moving Systems. Steerman Heavy load moving systems model SX and model S. Capacity t
Seerman Heavy load moving sysems model SX and model S 10-100 These universal heavy load moving sysems have been designed for he safe and cos saving ranspor of loads up o 100 ons. Individual configuraion
More informationSuper T QR20 GENERAL. BAM: Bomber Aerospace Material. Special alloy extracted from aerospace material Ø30 +0.
175 15 GENERAL 80 Ø30 +0.05 0 L.MAX=726.8 L.L.=716.8 L.MIN=566.8 ±2 273 ±2 523 193.8 RAVEL 150 49 35 15 20 0-0.1 +1 0 248.5 he double clamp fork is specifically designed for Downhill use. he fork is damped
More information