ZTrak PRO. 900 Series Mowers. Accept nothing less.

Transcription

1 ZTrak PRO 900 Series Mowers Accept nothing less.

2 It s about decks stamped out of the thickest steel. It s about increased power and better control. And it s about running all day, with ease. Accepting nothing less than the best: it s what guides you in your business. And it s what we used as a benchmark for designing and building our new ZTrak PRO 900 Series mowers. 2

3 Nothing less than the best zero turn mowers in the business. No matter what you re looking for in a commercial zero-turn mower, you ll find it in the Z900 lineup. We have the widest breadth of horsepower choices in the industry: from 22 all the way to 37. Our c-channel frames have been rebalanced for superior weight distribution. New transmissions for more efficient use of power. And improved reliability in the deck drive system. Accept nothing less: it is our mantra, our philosophy, and our measuring stick. And it s what we put into each and every Z900. Once you sit on one, you ll have it too. MOWING PERFORMANCE 7-Iron PRO best deck made today Up to 12 mph mowing speed More torque to the drive tires Better hillside operation SMOOTHER HANDLING New integrated ground drive transmission 2-position damper mounting Enhanced weight redistribution Conveniently placed controls EASE OF USE Deck step entry Run flat caster tires Brake and Go starting Comfort and Convenience package 3

4 Leave nothing behind but the finest cut possible. Caption text can be set at 8/10pt, JDSans Medium in black. Avoid hyphenation. Pay attention to rag. Captions should rest on the template gridlines and be positioned so they easily relate to photos, illustrations, charts or graphs graphics nearby. 4

5 Nothing in the industry matches our 7-Iron PRO deck: stamped out of 7-gauge steel, nor our exclusive Mulchon-Demand deck. But mowing performance is about more than just the mowing deck. Start with speed: the Z900s have an impressive mph. And even on our smaller engines, we have increased displacement for more power. Offset front caster wheels help improve inside corner trim performance and also help reduce between-blade striping. We redistributed weight on our frame, moving it from the front to the rear, so you can mow with confidence on hillsides. Power all along the line. Not only does the Z900 lineup have the widest breadth of horsepower choices, they also have larger displacement block in all of their engines. MOWING PERFORMANCE A solid foundation. The C-Channel frames on the Z900 are rock-solid, indestructible foundations. And a redistribution of weight, from front to rear, including a cast iron bumper, has made side-hill mowing a breeze. Deck drive. Count on these decks running smooth day after day, thanks to all metal, deep and extra-wide pulleys, and optimum belt alignment, no matter what cutting height you choose. 5

6 Sports-car handling and confident traction everywhere you mow. Whether you re tracing a flowerbed edge, mowing a sidehill (or even doing a figure eight), you want a transmission with lightning-quick responsiveness, and traction that never quits. With the new Z900, you get both. Lever position minimizes the motion required to make a turn, and an all-new integrated ground drive transmission offers the security of dual pumps plus ingenious reliability enhancements. And these unique engineering enhancements prevent crabbing or sliding on hills even under tough mowing conditions. Stays cool on hills. Unique cross-porting system routes the coolest hydraulic fluid to the hydraulic pump doing the most work. But we didn t stop there. For long life, our transmissions also feature a piston pump and internal wet disk brakes, and for performance, we added gear reduction drives to enhance torque to the drive wheels. 6

7 Surgically precise control. A smaller range of motion for the control levers, and tuned response time, means the system reacts smoothly to even the smallest movements by the operator. Made to perform. A gear reduction drive in the wheel motor adds mechanical muscle, increasing the torque available over a purely hydraulic system. A brand-new integrated ground drive system gives the Z900 line exceptional controllability, especially on side-hill mowing operations. Improved power and redistribution of weight has also improved performance. SMOOTHER HANDLING 7

8 Ride nothing but a machine that makes your life easier. Easy on, easy off. And everything else in between. From the very start, the Z900 is an operator s dream, thanks to our exclusive Brake and Go system. To start the machine, all you need is for the foot-actuated parking brake to be engaged. Easy is everywhere: a dial-in height of cut adjustment is located right on the control arm. Easy to sight fuel gauge. On-board selfdiagnostics. And run-flat tires that keep you going no matter what. We also make it safe to get on the Z900, thanks to a solid steel deck entry step. And our ANSI-certified ROPS featuring 3 positions. Caption text can be set at 8/10pt, JDSans Medium in black. Avoid hyphenation. Pay attention to rag. Captions should rest on the template gridlines and be positioned so they easily relate to photos, illustrations, charts or graphs graphics nearby. 8

9 ROPS (rollover protective structure) Z900 mowers are equipped with an ANSIcertified, rollover protective structure (ROPS) and seat belt. This 3-position ROPS enhances operator safety as well as provide ample clearance when trailering or mowing under trees. No tools required makes repositioning easy. BRAKE and GO System To put a Z900 into motion, all you have to do is set the parking brake with your foot and turn the key. It s that simple. No need to put the control levers in a certain position. EASE OF USE Ergonomic height-of-cut adjustment dial makes setting cut height simple and easy. The height-of-cut range is 1.5 to 5.0 inches at 1/4 in. increments. This simple mechanical design ensures superior performance and long life. A transport lock keeps your deck in place when loading and unloading. High Back Seat Professionals deserve to ride in comfort. This deep-cushioned, high-back chair has standard armrests for the ultimate ride. Extra-thick foam cushioning keep the bumps and jolts to a minimum. Comfort and Convenience Package These ergonomically angled control levers come with thick padded grips. What s more, the levers contain built-in electronic controls that let you raise or lower the deck as well as disengage the mower blades all with the push of a button. 9

10 Strength: you re either stamped with it or you re not. The strongest welds in the world are no match for a deck that is stamped out of thick steel. It takes 4,000,000 pounds of pressure to turn a sheet of 7-gauge steel into the backbone of the best mower deck in the industry: the 7-Iron PRO. 5.5 inches deep, the 7-Iron PRO deck houses blades that run at a speed of 18,000 feet per minute for more blades strikes per inch mowed and more acres per day. Stamped with strength and refined with a precision cut, not other deck in the industry has matched the 7-Iron deck since it was introduced in Best of all, it s green, which means it s backed by the best people in the business. This is how you build the best deck in the commercial mowing business: by using 4,000,000 pounds of pressure. That s the only way you can stamp a perfectly formed shell of 7-gauge steel. No other deck in the industry outperforms the 7-Iron PRO. 10

11 Reinforced Deck A full-wrap reinforcement makes the toughest deck even tougher. Plus a heavy-duty deck step gives solid footing and easy entry and exit into and off the operator s seat. Gauge Wheels Center and rear anti-scalp wheels, and double captured anti-scalp wheels make sure the 7-Iron PRO deck always provides unmatched cut quality. Gauge wheels can be found on six points around the deck. Reinforced Spindle The one-inch cold-forged spindles are heat-treated for strength and are supported by ball bearings, which helps support a blade tip speed that runs at an industry best 18,000 feet per minute. The spindle housings are made of ribbed cast aluminum for both strength and heat dissipation. Deep Deck A deep-deck design of 5.5-in. delivers excellent airflow so clippings can be processed quickly and efficiently. The wider and higher discharge opening provides even clipping dispersal in all conditions. 11

12 Nothing beats the deck that can mulch and side-discharge on demand. Switch from side-discharging to mulching and back again by simply pulling a lever; there is no need to stop and install any additional baffles. When engaged, the baffles close off the cutting chambers, allowing the deck to mulch. When disengaged, the baffles fold to the front of the deck, allowing it to side discharge. With it s outstanding side-discharge performance, windrows are history with the 7-Iron PRO Mulch On Demand Deck even in tall or thick grass. It s designed to save you time, especially when you re cutting by sidewalks, parking lots and plant beds, enabling you to engage the mulching mode when you need it. The flexibility to switch from side discharging to mulching effortlessly and safely helps you get the most from every acre and every hour. Clipping control. The MOD deck allows you to keep sidewalks and driveways clean as possible as you mow along their edges. While you still may have to blow clippings on occasion, the MOD deck will keep your blower time at bay. It starts with 7-Iron The MOD deck has, as its foundation, the legendary 7 Iron PRO deck. Which means it s stamped from a single sheet of thick, seven gauge steel using four million pounds of pressure. 12

13 Good for the environment. In this day and age, being green is not only good for the Earth, it s also good for business. The benefits of mulching are many: putting nitrogen back in the soil, reducing your carbon footprint by cutting down on waste, and mulching leaves. How the MOD deck works. By shifting the lever to mulch position, the movable gate closes off the discharge chute and the smooth moving baffles close off cutting chambers to maximize mulching performance. The MOD deck also has, as its foundation, the legendary 7 Iron PRO deck. Which means it s stamped from a single sheet of thick, seven gauge steel using four million pounds of pressure. Eliminate broken windshields You should also consider that it may not only be clippings coming out of your chute. Sometimes, a rock or a piece of wood can be thrown in the wrong direction. By putting the MOD in mulch position, it s a safe bet you ll never hit one of these. 13

14 More than just mowing. We took the hardest working machine in the business and made it the most flexible as well, thanks to this wide assortment of accessories and attachments. To pick up some extra trash or bag the clippings on a wet day check out the following additions to this fine machine: Attachments Available attachments for the ZTrak PRO models include: Material Collection Systems Hitch Trash Receptacle kit Lights Striping kit Mulching kit Suspension Seat kit Anti-skid mat Canopy Dump-from-seat MCS This 14-bushel, large-capacity hopper allows for longer mowing between dumpings. The blower is constructed of 7-gauge steel and the fan is made out of high-density polyethylene material. Best of all, putting it on or off requires no tools. 14

15 Lighting Kit The front light kit provides the ability to mow at twilight as well as early in the morning, letting you mow safely in low-light conditions. Features two lights, and mounting hardware. Roller Striping Kit Attaches easily to the side-discharge mower decks. The 2-in. roller has ¼-in. wall thickness of strong tubular steel. An internal axle runs the entire length with bearings on both sides. 3-Bag MCS System This 14-bushel, three-bag hopper has a Quik-Tatch mounting system for easy installation and removal. A Fill-Minder indicator alerts operator when the bags are full. Trash Receptacle Kit Enables trash pickup and storage without leaving mower seat. Keeps bucket out of way and away from trim side of mower. 15

16 997 Diesel ZTrak When you need brute power in a zero turn mower. Whether mowing with a side-discharge deck, a reardischarge deck, or with a mulching deck, the 997 excels in the toughest mowing conditions. In short, the heavy-duty, large-capacity 997 gives you front-mower like power in a zero-turn mower while providing the productivity and dependability you value. Power is in ample supply, thanks to a 31 hp Yanmar diesel engine. This engine provides more displacement and peak torque than most competitive mowers, which allows you to maximize acres mowed per hour. Shaft-driven mower decks are available in 60- or 72-in. 7-Iron II side-discharge decks or a 60-in. rear discharge deck. Powerful Diesel Engine The Yanmar 3-cylinder diesel engine features a high torque reserve that provides plenty of power. It s liquid cooled for more consistent operating temperatures and features direct fuel injection for more efficient combustion and improved starting. 16

17 Comfort and Convenience This package combines large, ergonomically-angled control levers with specially padded grips to provide unmatched comfort and reduced fatigue. The control levers have built-in electronic controls to raise or lower the mower deck or disengage the mower blades. Hydraulic Shaft Drive The hydrostatic drive features a Kanzaki dual-unitized hydraulic pump. This dual pump in a single housing provides longer life and less maintenance than competitive units. The pump features a shaft-driven fan for added cooling and longer component life. Deck Height Adjustment This innovative, low effort dial height-of-cut adjustment has fifteen height-of-cut positions from 1.5 inches to 5 inches in 1/4 inch increments, allowing you to change the height of cut without ever leaving your seat Standard ROPS Folding Two Post Roll Over Protection Structure (ROPS) and seat belt are standard equipment. ROPS can be positioned quickly and easily with out the use of tools. Easy to Service and Maintain An open engine compartment allows full access to engine components and service point. Flip-up seat allows easy access to the hydraulic system. And a flip-out panel lets you easy entry to the deck spindles. 17

18 The Z900 Work It For a Week Satisfaction Guarantee You ve read the brochure. Now what? How about putting our new Z900 to the test, at no risk? You can try one out on your turf, or on your crew for one week and return it if doesn t meet your total satisfaction. Here s how it works: Guarantee applies during first 10 days of ownership. Your trial period doesn t start until you actually use the machine, or April 1st, whichever comes first. If you are dissatisfied with your new Z900, you can bring it back for your money back.* That s right. You can take one of these mowers, pound out a week s worth of work and see what a difference it makes. Once you do, you ll accept nothing less. * Guarantee is limited to one per customer, but covers multiple unit sales. It does not cover abuse or neglect of the equipment. Provisions of the limited warranty for new John Deere Commercial & Consumer Equipment in effect at the time of the retail sale also apply. 18

19 10 You get the best of an entire company with every purchase. A dealer who gets the commercial business. John Deere knows keeping your equipment up and running is job number one. Every one of our dealers has factory-trained technicians, a comprehensive parts inventory and commitment to keep your business moving. A 2-year single-source bumper-to-bumper warranty. Covers the whole machine for two years. Your dealer handles every warranty claim, from transmissions to engines. So there s no need to go to component suppliers for service. Ever. Parts in stock, or overnight, or they re free. Bottom line, with John Deere you ll always get the part you need right away. In those rare instances when a maintenance part is not in stock, you ll have it the next day, or the part is free.* You can even pre-order parts 24/7/365 at JDParts.com. Flexible and seasonal financing. Your business is seasonal, that s why many of our finance options (revolving, installment and leasing) are set up to account for the variations in your available cash flow during the year. Comprehensive multilingual training resources. Every operator s manual is available in English and Spanish. Plus we offer many safety videos in both languages. See your dealer for details. Available onsite parts and service support.* If you don t have time to come to the dealership, we ll come to you. With one call you can get a trained service tech out at your site. You can even set up a program to have a dealer maintain parts inventory right at your place of business through our Parts OnSite program. THE JOHN DEERE DIFFERENCE There s more, but you get the picture. After over 170 years supporting professionals who make their living working the land, we know what it takes to help you succeed. See your dealer for the full story. * Some restrictions apply, please contact your John Deere dealer for details. Dealer participation is optional. Program not available in Canada. 19

20 Specifications Z910 Z920A Z925A Engine Manufacturer Kawasaki Kawasaki Kawasaki Horsepower (gross) 22 hp (16.4 kw) 26 hp (19.4 kw) 27 hp (20.1 kw) Displacement 44.5 cu. in. (730 cc) 44.5 cu. in. (730 cc) 52 cu. in. (852 cc) Crankshaft Orientation Vertical Vertical Vertical Crankcase Capacity 2.0 U.S. quart (1.89 L) 2.0 U.S. quart (1.89 L) 2.0 U.S. quart (1.89 L) Cooling Air Air Air Air Cleaner Heavy-duty canister type w/ safety Heavy-duty canister type w/ safety Heavy-duty canister type w/ safety Fuel Type Gas Gas Gas Fuel Tank Capacity 11.5 U.S. gallons (43.5 L) 11.5 U.S. gallons (43.5 L) 11.5 U.S. gallons (43.5 L) Hour Meter Standard, digital Standard, digital Standard, digital Operator Presence Starting System Brake and Go (standard) Brake and Go (standard) Brake and Go (standard) Diagnostics Type On-board On-board On-board Drive Train 20 Hydraulic Drive Kanzaki heavy-duty ground drive Kanzaki heavy-duty ground drive Kanzaki heavy-duty ground drive Hydraulic Capacity 2.8 U.S. quarts (2.65 L) (per side) 2.8 U.S. quarts (2.65 L) (per side) 2.8 U.S. quarts (2.65 L) (per side) Filter Internal, replaceable Internal, replaceable Internal, replaceable Travel Speed Forward mph ( km/h) mph ( km/h) 0-12 mph ( km/h) Travel Speed Reverse 0-5 mph (0-8.1 km/h) 0-5 mph (0-8.1 km/h) 0-5 mph (0-8.1 km/h) Drive Tires 24x Turf (48 in. deck), 24x12-12 Turf (54 in. deck) 24x Turf (48 in MOD Deck), 24x12-12 Turf (54 in. & 60 in. deck) 24x12-12 Front Caster Wheels No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6 Brakes Park Brake Internal wet disk Internal wet disk Internal wet disk Park Brake Actuation Foot pedal Foot pedal Foot pedal PTO Type Electro-magnetic (250 lb. ft.) Electro-Magnetic (200, 250 ft-lbs.) Electro-magnetic (250 lb. ft.) PTO Activation/Deactivation Pull knob Pull knob Pull knob Mower Deck Available Side Discharge Widths 48 in. & 54 in. (121.9 cm) & (137.2 cm) 48 in., 54 in., 60 in (121.9 cm), (137.2 cm)& (152.4 cm) 60 in. (152.4 cm) Available Mulch On Demand Widths 48in. MOD (121.9 cm) 54in. MOD (137.2 cm) Deck construction One-piece stamped steel One-piece stamped steel One-piece stamped steel Deck thickness 7 ga. (0.177 in.) 7 ga. (0.177 in.) 7 ga. (0.177 in.) Height-of-Cut Range in. ( cm) in. ( cm) in. ( cm) Increments 0.25 in. (0.6 cm) 0.25 in. (0.6 cm) 0.25 in. (0.6 cm) Blade Tip Speed 18,000 f/m 18,000 f/m 18,000 f/m Anti-Scalp Wheels Front Anti-Scalp Wheels Double captured right, center, and left Double captured right, center, and left Double captured right, center, and left Rear Anti-Scalp Wheels Double captured right, center and left Double captured right, center and left Double captured right, center and left Dimensions Length 84 in. (213.4 cm) 84 in. (213.4 cm) 84 in. (213.4 cm) Width (deck chute down) 62 in., 68 in. (157.5, cm) 62 in., 68 in., 74 in (157.5, 172.7, 188 cm) 68 in., 74 in. (172.7, 188 cm) Height with ROPS up 73 in. (185.4 cm) 73 in. (185.4 cm) 73 in. (185.4 cm) Height with ROPS Down 47 in (119.4 cm) 47 in (119.4 cm) 47 in (119.4 cm) Ground Clearance 5 in. (12.7 cm) 5 in. (12.7 cm) 5 in. (12.7 cm) Weight 1320 lb (w/48" deck) 1320 lb (w/48" deck) 1408 lbs. (w/60" deck) Warranty The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. 2 year commercial - unlimited hours 2 year commercial - unlimited hours 2 year commercial - unlimited hours

21 Z930A Z950A Z960A Z970A Kawasaki Kawasaki Kawasaki Kawasaki 29 hp (21.6 kw) 31 hp (23.1 kw) 34 hp (25.4 kw) 37 hp (27.6 kw) 52 cu. in. (852 cc) 52 cu. in. (852 cc) 61 cu. in. (999 cc) 61 cu. in. (999 cc) Vertical Vertical Vertical Vertical 2.0 U.S. quart (1.89 L) 2.0 U.S. quart (1.89 L) 2.0 U.S. quart (1.89 L) 2.0 U.S. quart (1.89 L) Air Air Air Air Heavy-duty canister type w/ safety Heavy duty canister type w/ safety Heavy duty canister type w/ safety Heavy duty canister type w/ safety Gas Gas Gas Gas 11.5 U.S. gallons (43.5 L) 11.5 U.S. gallons (43.5 L) 11.5 U.S. gallons (43.5 L) 11.5 U.S. gallons (43.5 L) Standard, digital Standard, digital Standard, digital Standard, digital Brake and Go (standard) Brake and Go (standard) Brake and Go (standard) Brake and Go (standard) On-board On-board On-board On-board Kanzaki heavy-duty ground drive Kanzaki heavy-duty ground drive Kanzaki heavy-duty ground drive Kanzaki heavy-duty ground drive 2.8 U.S. quarts (2.65 L) (per side) 2.8 U.S. quarts (2.65 L) (per side) 2.8 U.S. quarts (2.65 L) (per side) 2.8 U.S. quarts (2.65 L) (per side) Internal, replaceable Internal, replaceable Internal, replaceable Internal, replaceable 0-12 mph ( km/h) 0-12 mph ( km/h) 0-12 mph ( km/h) 0-12 mph ( km/h) 0-5 mph (0-8.1 km/h) 0-5 mph (0-8.1 km/h) 0-5 mph (0-8.1 km/h) 0-5 mph (0-8.1 km/h) 24x x x x12-12 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6 No Flat, Semi-pnuematic rounded shoulder, 13x6.5-6 SPECIFICATIONS Internal wet disk Internal wet disk Internal wet disk Internal wet disk Foot pedal Foot pedal Foot pedal Foot pedal Electro-magnetic (250 lb. ft.) Electro-magnetic (250 lb. ft.) Electro-magnetic (250 lb. ft.) Electro-magnetic (250 lb. ft.) Pull knob Pull knob Pull knob Pull knob 60 in. w/c&c, 72 in. (152.4 & cm) 60 in., 72 in. w/c&c (152.4 & cm) 60 in w/c&c., 72 in. w/c&c (152.4 & cm) 72 in. w/c&c (182.9 cm) 60 in. MOD (152.4 cm) 60 in. MOD (152.4 cm) 60 in. MOD w/c&c * (152.4 cm) One-piece stamped steel One piece stamped steel One piece stamped steel One piece stamped steel 7 ga. (0.177 in.) 7 ga. (0.177 in.) 7 ga. (0.177 in.) 7 ga. (0.177 in.) in. ( cm) in. ( cm) in. ( cm) in. ( cm) 0.25 in. (0.6 cm) 0.25 in. (0.6 cm) 0.25 in. (0.6 cm) 0.25 in. (0.6 cm) 18,000 f/m 18,000 f/m 18,000 f/m 18,000 f/m Double captured right, center, and left Double captured right, center, and left Double captured right, center, and left Double captured right, center, and left Double captured right, center and left Double captured right, center and left Double captured right, center and left Double captured right, center and left 84 in. (213.4 cm) 84 in. (213.4 cm) 84 in. (213.4 cm) 84 in. (213.4 cm) 74 in., 86 in. (188, cm) 74 in., 86 in. (188, cm) 74 in., 86 in. (188, cm) 86 in. (218.4 cm) 73 in. (185.4 cm) 73 in. (185.4 cm) 73 in. (185.4 cm) 73 in. (185.4 cm) 47 in (119.4 cm) 47 in (119.4 cm) 47 in (119.4 cm) 47 in (119.4 cm) 5 in. (12.7 cm) 5 in. (12.7 cm) 5 in. (12.7 cm) 5 in. (12.7 cm) 1408 lbs. w/60" deck) 1408 lbs. w/60" deck) 1449 lbs. (w/60" MOD deck) 1501 lbs. (w/72" deck) 2 year commercial - unlimited hours 2 year commercial - unlimited hours 2 year commercial - unlimited hours 2 year commercial - unlimited hours 21

22 Specifications Engine Manufacturer Horsepower (gross) Displacement Crankcase Capacity Oil Filter Lubrication Cooling Air Cleaner Pre-Cleaner Fuel System Fuel Type Fuel Tank Capacity Fuel Tank Switch/Shut Off Valve 997 Diesel Yanmar 3000 rpm 81 cu. in. 3.6 L(3.8 QT) Full flow, replaceable, Spin-on type Full pressure Liquid Dry-type, replaceable Yes Diesel 12 gal Yes Drive Train Hydraulic Pumps Kanzaki DUP 17S Wheel Motors Parker Ross Travel Speed Forward mph Travel Speed Reverse 0-5 mph Speed and Direction Control Zero turn Hydraulic Capacity 3.2 U.S. gal (tank capacity) Hydraulic Oil Cooler Yes Filter Spin-on Type Brakes Dynamic Braking Dual hand controlled levers Park Brake Caliper disc brake Park Brake Actuation Hand lever PTO Type Hydraulic clutch Drive Internal wet disk clutch Mower Decks Available Widths 60, 72 in., and 60 in. rear discharge Deck construction 7-Iron II: One piece stamped steel Deck thickness 7 gauge (.177 in.) stamped steel Discharge 60 side Height-of-Cut Range in. Increments 0.25 in. Cutting Width 60 in. Wheels Caster Wheel Type Pneumatic Caster Wheel Size Front/Rear Anti-Scalp Rollers LH, RH, Center Dimensions Length 96 in. (60 in. SD) Width 74 in (60 in SD) Height 85 in (ROPS up) Weight 1774 lb. 60 in. SD Warranty 2 year commercial - unlimited hours 22

23 Your partner. From the ground up. We can help you with more than mowing. Your John Deere dealer is linked to your local John Deere Landscapes the nation s leading supplier of wholesale irrigation, landscape lighting, nursery and supplies. So not only can we help you maintain landscaping, but we can help you build it, maintain it and support it. Plus we offer a full-line of landscaping tools like Skid Steers, Mini- Excavators and Compact Tractors. So talk to your John Deere representative about how we can be your trusted partner for everything on the jobsite.

24 Proud sponsor of This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include fi nance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere reserves the right to change specifi cation and design of all products described in this literature without notice. DKA5511 (09-10) Ref Litho in U.S.A.