DryLin W Guiding system
|
|
- Antony Williams
- 5 years ago
- Views:
Transcription
1 DryLin W Guiding system Introduction Your choice of length and width DryLin W is a low cost linear guiding system that was developed to provide both design flexibility and quick assembly in both single and double rail configurations. The hard anodised aluminium rails means that DryLin W systems are reputed for their low wear, low coefficients of friction, their resistance to dirt and their quiet operation..characteristics. - Sliding elements are maintenance free - Maximum speed: 15 m/s - Working temperature: -40 C to +90 C.Advantages. - Easily mounting, no maintenance required - Low cost sliding carriage made from chromed zinc alloy and fitted with an iglidur J200 liner - Extremely light and lubricant free - Unsupported sections allowed - Single rail systems possible - Not affected by dirt or dust - Highly robust, wear and corrosion resistant - Noiseless operation - Hardened anodised aluminium rails - Sliding elements fitted with iglidur J200 liners - Physical dimensions match those of standard aluminium profiles - Low coefficient of friction Hardened anodised aluminium rails 2 - Smooth iglidur J200 liners 3 - Chromed zinc alloy carriage 4 - Anodised aluminium mounting plate DryLin W used for a stop dog in the glass industry DryLin W Highest design flexibility 214 Volume Tel: +33(0)
2 DryLin W - Preloading Slides Size 16 Size 20 Size , Speed V[m/s] F/V diagram, Max Dynamic load capacity (System with 4 bearings) M 0X C 0Y y X Z C 0Z Z M 0Z M 0Y C 0(-Y) Rails available Size 10 Size 16 Size 20 Single round rail Double rail Fax: +33(0) cial2@hpceurope.com Volume
3 DryLin W rail Design and assembly guide.assembly. Floating bearings for linear guide systems Floating bearing Fixed bearing Bearings able to float in all axes (+/- 1mm) compensate for misalignment and parallelism errors.design. - Floating bearings: - Facilitate assembly - Only required where the rail or the system is welded - Although DryLin W is a profile rail system, it is able to compensate angular rotation errors about the x-axis. An angular adjustment of ±7 is possible. This effectively eliminates the problems known to occur when fitting to sheet metal. ±0,2 Automatic compensation of parallelism errors Floating Fixed ±0,2 y LL-rond Floating bearings are available on request.eccentric Forces. When using linear plain bearings it is important to ensure that the acting forces follow the 2:1 Rule (see drawing). If either the load or the drive force (F) is greater than twice the bearing length (1x), then a binding or interrupted motion may occur. It is causing by rubbing. The further the bearing is distanced from the guide bearing, the greater the wear and required moving force..info.. - If this guide is not followed, then the movement may become jerky or the system may jam. Floating bearing Assembly using rails Distance acceptable for applied loads 2x Fixed bearing 1x F 216 Volume Tel: +33(0)
4 DryLin W rail Size 10 - Ø10 shaft WS10 - Material: hard anodised aluminium - Standard length: 1000mm Option: Other lengths available (up to 4000mm) m) - for slide WJUM10 and WJRM10 17 L 9 27 WS ,5 120 Ø6,6 For M6 screws Ø WS /-0,3 WS10-80 Length L Max. length L mini maxi ly (mm 4 ) lz (mm 4 ) Wby (mm 3 ) Wbz (mm 3 ) Weight (kg/m) 1 to 5 Part number Stock* WS , , ,60 F WS , , ,90 F WS , , ,06 F Fax: +33(0) cial2@hpceurope.com Volume
5 DryLin W bearing block Size 10 - For loads of up to 1200N WJUM10 - Material: Housing: Zamak Liner: iglidur J200.Advantages. - Full design flexibility using WS10 single rails and WJUM01-10 slides , M6 Max. static load (20ºC) Backlash Weight Coy Coz+ Coz- Part number Type (g) (N) (N) (N) Stock* 1 to 5 WJUM01-10 Fixed ,37 F WJUM01-10-LL Floating ±0, ,37 F! Coz ±0, Volume Tel: +33(0) M5 WS10 16,5
6 Size 10 DryLin W slide WW10 A WW10 slide comprises: - 1 mounting plate - 4 WJUM01-10 bearing block.advantages. - Low profile design.accessories. - WS10-40 and WS10-80 rails A A2 18 ±0,07 24 ±0,07 1,5 y x z M6 C2 C Max. static load (20ºC) Coy Coz Mox Moy Moz Weight Part number A C A2 C2 (N) (N) (N) (Nm) (Nm) (kg) Stock* 1 to 5 WW , ,49 F WW , ,15 F WW , ,18 F WW , ,14 F WW , ,15 F WW , ,98 F Fax: +33(0) cial2@hpceurope.com Volume
7 DryLin W rail WS16 Size 16 - Ø16 shaft - Material: Hard anodised aluminium - Standard length : 1000mm - Other lengths available (up to 4000 mm) - for slide WJUM16 and WJRM For M8 screws L WS16 7,5 3,5 Ø8 58 Ø16 54 WS16-60 Part number Length L Max. length L mini maxi ly (mm 4 ) lz (mm 4 ) Wby (mm 3 ) Wbz (mm 3 ) Weight (kg/m) Stock* 1 to 5 WS , , ,17 F WS , , ,67 F 220 Volume Tel: +33(0)
8 DryLin W bearing block Size 16 - For loads of up to 2100N WJUM16 - Material: Housing: Zamak Liner: iglidur J200.Advantages. - Full design flexibility using WS16 single rails and WJUM01-16 slides ,5 M8! Coz- 16 M5 WS ! Coz Max. Charge static statique load (20ºC) maxi (20ºC) Part number Weight Coy Coz+ Coz- Type backlash (g) (N) (N) (N) Stock* 1 to 5 WJUM01-16 Fixes ,37 F WJUM01-16-LL Floating ±0, ,39 F Fax: +33(0) cial2@hpceurope.com Volume
9 DryLin W slide WW16 Size 16 A WW16 slide comprises: - 1 mounting plate - 4 WJUM01-16 bearing block.advantage. - Low profile design.accessories. - WS10-40 and WS10-80 rails A A2 27 ±0,07 35 ±0,17 y 1,5 x z C2 C M8 Max. static load (20ºC) Coy Coz Mox Moy Moz Weight Part number A C A2 C2 (N) (N) (N) (Nm) (Nm) (kg) Stock* 1 to 5 WW ,71-110,29 F WW , ,72 F WW ,97-133,05 F 222 Volume Tel: +33(0)
10 DryLin W rail Size 20 - Ø20 shaft WS20 - Material: Hard anodised aluminium - Standard length: 1000mm - Other lengths available (up to 4000 mm) - for slide WJUM20 and WJRM Ø10,20 21 For M8 screws L WS20 9,5 Ø WS20-80 Part number Length L Max. length L mini maxi ly (mm 4 ) lz (mm 4 ) Wby (mm 3 ) Wbz (mm 3 ) Weight (kg/m) Stock* 1 to 5 WS , , ,02 F WS , , ,03 F Fax: +33(0) cial2@hpceurope.com Volume
11 DryLin W bearing block Size 20 - For loads of up to 3200N WJUM20 - Material: Housing: Zamak Liner: iglidur J200.Advantage. - Full design flexibility using WS20 single rails and WJUM01-20 slides ,50 M8! Coz ±0,07 37 M6 WS ! Coz- Part number Backlash Weight Coy Coz+ Coz- Type (g) (N) (N) (N) Stock* 1 to 5 WJUM01-20 Fixed ,28 F WJUM01-20-LL Floating ±0, ,28 F 224 Volume Tel: +33(0)
12 Size 20 DryLin W slide WW20 A WW20 slide comprises: - 1 mounting plate - 4 WJUM01-20 bearing blocks.advantages. - Low profile design.accessories. - WS20-80 rails A A2 ±0,07 44±0, ,5 M8 C2 C Max. static load (20ºC) Coy Coz Mox Moy Moz Weight Part number A C A2 C2 (N) (N) (N) (Nm) (Nm) (kg) Stock* 1 to 5 WW , ,68 F WW ,30-123,16 F WW ,50-131,01 F Fax: +33(0) cial2@hpceurope.com Volume
13 Linear guide system Drylin W Hybrid bearings WJRM - Drylin W hybrid bearings offer a unique combination of sliding and rolling movement. Depending on the mounting arrangement used, the use of maintenance free rollers reduce the driving force required. Any shear forces or shock forces are absorbed by the bearing. This hybrid bearing is ideally suited for manual adjustments especially in the applications such as door adjustments. - Low driving force required, coefficient of friction 0.04 to 0.05µ - Highly cost effective solution - Can be used with any of 7 profiles rails such as WS10,WS16 and WS20.Application. - Adjustable doors, machine guards, simple handling systems, furniture 226 Volume Tel: +33(0)
14 Linear guide system Drylin W Sizes WJRM - Material : Zamack Liner manufactured from iglidur J.Advantages. - No lubrication required - Small size - Lightweight C1 C3 Castor A3 G1 K3 H B2 A1 K2 B WJRM01-10 WJRM01-16 WJRM01-20 y Q2 x z Q1 WJRM02-10 WJRM01-16 WJRM01-20 Qty Disc List -10% 20+ On request Static Dynamic load capacity for Fxv load a total travel distance of (km) Max Part number (W) 10 (N) 100 (N) 200 (N) (N.m/s) WJRM WJRM WJRM WJRM Part Weight number A1 A3 B B2 C1 C3 G1 H K2 K3 Q1 Q2 (g) 1 to 5 WJRM ,5 6,5 26 2, M6 M ,51 F WJRM ,5 6,5 26 2, M6 M ,51 F WJRM , M8 M ,01 F WJRM , M8 M ,88 F Dimensions in mm Fax: +33(0) cial2@hpceurope.com Volume
Flexible Linear Guide System
Flexible Linear Guide System Easy installation Lubrication-free Different carriage lengths available Different rail widths available Low installation height Corrosion resistant 39.1 Flexible Linear Guide
More informationdrylin W hybrid bearings
Roll and slide Single or double roller Low driving forces For manual adjustment Dry operation Single and complete carriages Quiet operation 817 Advantages Hybrid from the linear construction kit rail made
More informationdrylin W Modular Guide Systems
Modular Guide Systems Easy to install Lubrication-free Different carriage lengths available Different rail widths available Low installation height Corrosion-resistant 939 Modular Guide Systems Product
More informationDryLin W Toolkit. Easy Installation Dry running operation Variable carriage lengths Different rail widths available Low-profile Corrosion-free
DryLin W Toolkit Easy Installation Dry running operation Variable carriage lengths Different rail widths available Low- Corrosion-free 911 DryLin W - Profile Guides - Toolkit Self-lubricating, light, quiet,
More informationdrylin W Modular Guide Systems
Modular Guide Systems Easy to install Lubricant-free Different carriage lengths available Different rail widths available Low installation height Corrosion-resistant 939 Modular Guide Systems Product Overview
More informationdrylin W Modular Guide Systems
drylin W Modular Guide Systems Easy to install Lubricant-free Different carriage lengths available Different rail widths available Low installation height Corrosion-resistant 835 drylin W Modular Guide
More informationdrylin N Low-Profile Guide Systems
drylin N Low-Profile Guide Systems Low-profile height and width Replaceable polymer sliding pads Anodised aluminium rail High speed and acceleration possible Lubrication-free Low weight 925 drylin N drylin
More informationLinear technology.....plastics
dr ylin... Linear technology.....plastics Application examples: drylin Improve technology... Reduce cost. For years the igus motto has been "plastics for longer life ". y this we mean the production of
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationdrylin Stainless Steel
drylin Stainless Steel Lubrication-free Temperature-resistant up to +250 C Corrosion-resistant Chemical-resistant Standard parts with short 995 drylin Stainless Steel Machine parts made of are designed
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationDryLin T Rail Guide Systems. Corrosion-free Wear-resistant Low friction Extremely quiet operation Self-lubricating
DryLin T Rail Guide Systems Corrosion-free Wear-resistant Low friction Extremely quiet operation Self-lubricating 971 DryLin T - Rail guide - Advantages Resistant to dirt, low vibration, low noise, long
More informationTRACK GUIDANCE SYSTEMS
EURO-BEARINGS LTD TRACK GUIDANCE SYSTEMS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com INTRODUCTION EURO-BEARINGS LTD www.euro-bearings.com Tel. 01908 511733 This linear guidance
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationcarriages to carry the load (taking into account any moment loads). Unlike the N series sliders these CS sliders do not have protective side seals.
Light Duty Sliders, size 18 no side seal, front fixing Long Linear s L1918.CS Material Zinc plated steel body. Steel rollers (100Cr6) with metal (2Z) or rubber (2RS) seals. Technical notes To be used with
More informationThe Separator arrangements depend on the application (see order example or separator options).
SLE Energy chains individual solutions large dimensions simple handling The order for a steel chain SLE should contain the following data: Type / Radius x Length / Width - Connector Arrangement ; Separator
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationdrylin linear technology drylin shafts
linear technology ard anodised aluminium for optimum running performances Stainless steel for high corrosion resistance ardened steel and stainless steel Carbon fibre Round with and without support Advantages
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationContents. iglidur Plain Bearings Page iglidur Sleeve Bearing Type S Page 374. iglidur Flange Bearing Type F Page 374
BEARINGS Innovations comprising high performance plastics igus polymer plain bearings constitute the step from a simple plastic bushing to a tested, predictable and available machine element. Our research
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationDryLin R - Linear Plain Bearings - Fast and Quiet. Linear Bearings. DryLin R. Fax Phone Corrosion resistant
Linear Bearings - Linear Plain Bearings - Fast and Quiet Corrosion resistant Wear resistant Resistant to contaminants Low coefficient of friction Extremely quiet operation Lightweight 29.1 DryLin Linear
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationLINEAR MOTION COMPONENTS. hepcomotion.com
LINEAR MOTION COMPONENTS hepcomotion.com GV3 Linear Guide System SL2 Stainless Steel Linear Guide Extreme Temperature and 4 System 6 Vacuum Linear Guide System 7 MHD Track Roller Guide System Ball Bushings
More informationLinear Guideway. Forniture per l Industria Gelmini S.r.l.
Linear Guideway Forniture per l Industria Gelmini S.r.l. Sede Via Cerati, 3/A 43126 Parma Tel. 0521.993844 Fax 0521.291688 Filiale Via Tiziano, 11 46040 Z.I. Guidizzolo (MN) Tel. 0376.847123 Fax 0376.840319
More informationdrylin electric drive technology drylin E
drylin electric drylin E Lubrication-free linear modules with stepper and DC motors Drive: lead screw, toothed belt or rack Individual stroke lengths Pre-configured linear axes and multi-axis linear robots
More informationDryLin W Modular Guide Systems Product Range
! !!! Dryin W Dryin W Modulr Guide Systems Product Rnge Single ril nd ousing bering, round Order key complete pge 785 Ril Bering block K1 C3 G1 A3 WJ200UM-01-.. d d1 C6 C4 C5 di 1 WS-.. Illustrted rils
More informationInkoturn couplings. INKOMA - GROUP Couplings. Product description. Inkoturn couplings IKT. FRANCIS AND FRANCIS Ltd.
Product description The INKOM Inkoturn coupling (IKT) is a flexible coupling with high torsional rigidity, which has been developed for applications requiring high speed and where shaft is present. INKOM
More informationIntroduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.
Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely
More informationR310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
More informationLINEAR ROLLER SYSTEM with MR rail and R, R.T, R.S sliders
NR R R N NR ROR YTM with MR rail and R, R.T, R. sliders The MR eries inear Rail ystem consists of a -section steel rail with internal convex raceways, where robust double row ball bearing rollers travel.
More informationSizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics
More informationLINEAR ACTUATORS. hepcomotion.com
LINEAR ACTUATORS hepcomotion.com PDU2 Belt Driven DLS Belt Driven 3 4 SBD Belt Driven A SDM Ball Screw HDCS Heavy Duty Ball Screw 8 9 LINEAR ACTUATORS ctuator HDLS Heavy Duty Belt Driven PSD Ball Screw
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More information12.4 Miniature Type, MSC MSD Stainless Steel Series
12.4 Miniature Type, MSC MSD Stainless Steel Series A. Construction Carriage End Cap MSC Standard Type End Seal Rail MSD Wide Type Ball Retainer Bottom Seal 45 45 B. Characteristics MSC st ows with Gothic-arch
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More informationROSTA RUBBER SUSPENSION UNITS. Multifunctional Modules for the Machine Industries. guiding tensioning absorbing ROSTA
RUBBER SUSPENSION UNITS Multifunctional Modules for the Machine Industries guiding tensioning absorbing Product Range Modules Rubber Suspension Unit Type DR-S Page 19 Housing made out of steel, inner square
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationLINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:
R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction
More informationEasy Slide Rails ov -easy_slide_divider - U pdated
Easy Slide Rails ov-easy_slide_divider - Updated - 18-09-2017 163 Easy Slide Rails Easy Slide Rails Introduction The Easy Slide family of linear rails have a compact cross-section and low-friction movement.
More informationHepcoMotion. SBD Sealed Belt Drive
HepcoMotion SBD Sealed Belt Drive Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load
More informationELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS
ELECTRIC AXIS ELEKTRO SVAK SERIES 1 ELECTRIC AXIS ELEKTRO SVAK SERIES This belt-driven rodless electric actuator is characterised by the fact that the motor and reducer unit is integral with the carriage,
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More informationLocking elements. Technical information
Technical information ocking elements.principle of operation. These parts operate on the basis of an interference fit between two conical rings crewed together. The outer ring expands and exerts a pressure
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. Inkoturn couplings
INKOM-GROUPINKOM - DRIVE-TECHNOLOGY GROUP Inkoturn couplings INKOM-GROUP Headoffice Sitz der INKOM Maschinenbau GmbH Neue Reihe 44 D - 3862 Schandelah - Germany phone: +49/(0)5306-922-0 fax: +49/(0)5306-922-50
More informationProfile rail guides LLT
Profile rail guides LLT Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationLoPro aluminium based slide system
LoPro aluminium based slide system Introducing the Hepco LoPro Hepco LoPro has been introduced to provide the designer with a lightweight yet rugged linear slide system. LoPro is aluminiumbased with steel
More informationБерг АБ Тел. (495) , факс (495)
HepcoMotion SBD Sealed Belt Drive www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071 Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit.
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the
More information...components in motion. Easy Rail
...components in motion Easy Rail Easy Rail Introduction The Easy Rail family have a compact cross-section and low-friction movement. Robust and Long Service Life Easy Rail s range of cross-sectional rail
More informationwith MR rail and R, R.T, R.S sliders
inear Roller earing ystem with MR rail and R, R.T, R. sliders N R R R N The MR eries inear Rail ystem consists of a -section steel rail with internal convex raceways, where robust double row ball bearing
More informationPARALLEL INDEX DRIVES TP Series
PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN
More informationSIT-LOCK self locking elements
self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with
More informationUniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
More informationActive and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationigus solutions for the aviation industry ..interior plastics for longer life IG-B19
ircraft... igus solutions for the aviation industry..interior... www.igus.com/aircraft plastics for longer life... IG-B19 Reduce cost... Lightweight, quiet, small and reliable. igus products fulfill the
More informationProfi le rail guides LLR
Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationdrylin TR Lead Screw Drives
drylin TR drylin TR Lead Screw Drives Maintenance free, dry running, low noise Insensitivity to dirt Corrosion-free Trapezoidal and high helix thread Excellent emergency running properties Anti-Backlash
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationReducing Backlash / Increasing Rigidity Jaw Coupling Precision Jaw Oldham Helical Beam Disc coupling
Precision Couplings A shaft coupling is a critical element in a robust and durable linear shaft drive. Misalignment of motor and drive shafts can cause loss of precision, noise and premature failure. By
More informationPK couplings. Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationProduct description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationRIGHT ANGLE DRIVES TG Series
RIGHT ANGLE DRIVES TG Series Right Angle Fixed Index Drives TG Series The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
EASYSLIDE Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make changes
More informationDrive technology.....plastics
dr ylin... Drive technology.....plastics drive technology pplication examples CMER/LSER DJUSTMENT IN LBELING SYSTEM In a labeling system the camera and laser positioning are guided with two SHT/SLWE-XY
More informationigus- Harnessing Save time and costs with customized assembled systems Predictable lifetime with the use of the maintenance free iglidur bearings
Predictable lifetime with the use of the maintenance free iglidur bearings Other application examples with iglidur bearings: Filling machine, inspection units, labelling machine, bottle cleaner, stretch
More informationMINIRAIL Profiled miniature guideway
MINIRAIL Profiled miniature guideway Table of Contents 1 Product overview and technical informations MINIRAIL a range of high-precision products.... 2 MINIRAIL overview accuracy classes:.... 3 MINIRAIL
More informationdrylin R Round Shaft Guide Systems
Round Shaft Guide Systems Lubrication-free Corrosion-resistant Wear-resistant Insensitive to dirt Low friction Extremely quiet operation Low weight 869 Round Shaft Guide Systems linear plain bearings are
More informationActuator ine www.motiontech.com.au Part 2 General catalogue English www.rollon.com www.rollon.com When you move. We move Rollon S.p.A. was founded in 1975 as a manufacturer of linear motion components.
More informationLinear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD
inear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD Contents Description Data Sheet No. Page Overview 1.15.001E 11-14 Technical Data 1.15.002E-1 to 3 15-17 Dimensions 1.15.002E-4
More informationIntroduction of Each Series
12 Introduction of Each Series 12.1 eavy Load Type, MSA Series A. Construction LINEAR GUIDEWAY Upper Retainer Carriage End Cap End Seal Grease Nipple Ball Lower Retainer Rail 45 eavy Load Type, MSA Series
More informationDouble acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous.
Double acting Standard executions Version Symbol Type Parallel from bore 25 mm. S4 On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T5 Options Special versions on request Suffix
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
More information1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationSNR, YOUR GUIDE TO LINEAR MODULES
SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has
More informationhttps://amironic.co.il/ COUPLINGS Oldham Lateral Offset Coupling Set Screw Fixing : Blind Hub : Nm : 2-20mm Bores
BG COUPINGS Oldham ateral Coupling Set Screw Fixing : Blind : 0.7-57 : - 0 Bores ØA BG BG9 BG3 BG9 BG5 BG33 BG33S BG BG BG9 BG3 BG9 BG5 BG33 BG33S BG 0 0 0 0.00 Deg/ 5.700.900 0.0 0.0 0.0 /rad 0 30 5 5
More informationT-MAX SERIES Direct Drive Rotary Servo
T-MAX SERIES Direct Drive Rotary Servo T-MAX SERIES Direct Drive Rotary Servo Low Profile Direct-drive Rotary Stage Smooth Brushless Servo-drive Positioning Motion Integrated High Resolution Rotary Encoder
More information...components in motion. Miniature Linear Guideways
...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape
More informationFARRELL SLF300 Slide and Stack Glass Panel System
Slide and Stack Glass Panel System Slide and Stack Glass Panel System features a comprehensive combination of aluminium top track that facilitates flexibility in design layout. This system is able to carry
More informationThe Classification Chart of PMI Linear Guideways
1 The Characteristics of MI s The Classification Chart of MI s 2 (1) igh positioning accuracy, high repeatability The MI linear guideway is a design of rolling motion with a low friction coefficient, and
More informationDryLin Linear Slide Tables - HTS SLWE-BB - With ball bearing lead screw supports
- HTS SLWE-BB - With ball bearing lead screw supports SLWE-BB linear table uses ball bearings to carry loads in the axial direction, making them ideal for high PM applications Linear guide and lead screw
More informationLinear Motion. Rail guide tables
Linear Motion Rail guide tables The SKF Group The SKF Group is an international industrial corporation of AB SKF Sweden, founded in 1907, operating in 130 countries. The company has some 45000 employees
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationLINEAR UNITS CT & MT
LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
More informationThe gear boxes can be run at the same speeds as the actuator models. Do not exceed torque ratings.
1. What is the lifting torque required? The lifting torque for a single actuator depends on the load, the worm gear ratio, type of screw (machine cut or ball screw) and the pitch of the lifting screw.
More informationHigh precision and super light. Angular contact roller bearings from INA
High precision and super light Angular contact roller bearings from INA Angular contact roller bearings High precision and super light The limits of conventional ball reaching their performance limits
More informationNEW. Linear Ball Bushing Bearings and 60 Case Shafting. Profile Rail Linear Guides
Linear Ball Bushing Bearings and 60 Case Shafting Thomson invented the ball bushing bearing over 60 years ago and has since been the recognized leader in this field. Our linear products provide low friction,
More informationTELESCOPIC RAIL HEAVY
TELESCOPIC RAIL HEAVY Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
More informationInterchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE
Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE 02 LINTRA PLUS LINTRA PLUS RELIABLE, DURABLE & PROVEN LINTRA Plus builds on the well-proven reputation of Norgren s existing
More informationSince 1987, the NORCAN Company has been distinguished by its high-quality modular structures formed by aluminium profiles connected by standard M8
Since 1987, the NORCAN Company has been distinguished by its high-quality modular structures formed by aluminium profiles connected by standard M8 screw fixings: a system that is flexible in use, simple
More information