6" LED Open Downlight LF6LEDG4 120V 277V 0-10V Dimming

Transcription

1 6" LED Open Downlight LF6LEDG4 120V 277V 0-10V Dimming DATE: FIRM NAME: PROJECT: TYPE: STANDARD 0-10V DIMMING ALTERNATIVE DIMMING TO 1% & 0.1% APPLICATIONS: LiteFrame LF6LED is a 6" specification grade LED open downlight that utilizes remote phosphor technology to obtain color consistency, energy savings, and low maintenance costs. 50,000 hours minimum life up to 35ºC (95ºF) in open plenum applications. HOUSING: One-piece 22 gauge non-corrosive steel platform. Prewired j-box with snap-on cover for easy access. Snap-inconnection from driver compartment allows easy installation of light engine/trim assembly without tools above or below the ceiling and can be upgraded to accommodate technology improvements. Approve for 8 (4 in/4 out) No. 12 AWG conductors rated for C through wiring. REFLECTOR: High purity aluminum, Alzak, iridescence suppressed, semidiffuse upper reflector. Self-trim standard. Painted white self-trim (WT) available as option. Reflector is made from anodized Alanod Miro 4 aluminum. LED LIGHT ENGINE: The LF6LED uses the Philips Fortimo DLM Gen 4 LED Module with remote phosphor technology. This technology provides controlled color consistency (3 SDCM) from fixture to fixture. The system is designed for optional life and lumen maintenance (>50,000 hours at 70% lumen maintenance). Both reflector and light engine assembly are mechanically retained to housing. The light engine comes standard with 80 CRI in all Kelvin temperatures. CATALOG NUMBER: Order housing, reflector, and accessories separately HOUSING/LED GENERATION VOLTAGE OPTIONS _ LF6LEDG4 6" High Efficacy LED Housing 120V 277V A Division of Hubbell Lighting, Inc. Standard 0-10V dimming to 10% EM 2,4,6 Emergency Battery Pack with integral test switch and indicator light EMR 4 Emergency Battery Pack with remote test switch and indicator light CP 9,10 Chicago Plenum Use with HDM/DM1/2DM/DMX dimming option: Match Housing to Trim Output LF6LED5G4 LF6LED6G4 LF6LED7G LED DRIVER: The LF6LED utilizes the Philips Fortimo LED Driver specifically designed to optimize efficiency of the Fortimo DLM Module. Driver is designed to match the 50,000 hours minimum life expectancy of the system. Meets UL Class 2, inherent short circuit protection, self limited, overload protected. If critical temperatures are reached on driver or LED module, integrated thermal feedback loop will gradually reduce current to protect system life. Driver is universal 120V-277V. Optional Lutron Series A driver is also available. DIMMING: Comes standard with 0-10V dimming capability. Flicker-free dimming to 10%. 0-10V control may consume up to 1mA. 0-10V, Lutron 2 wire, 3 wire, and EcoSystem dimming available to 1% and DMX with RDM (remote device management) dimming to less than 0.1%. INSTALLATION: Adjustable Bar hangers included. Universal adjustable mounting brackets also accept 1/2" EMT conduit or 1 1/2" or 3/4" lathing channel (by others) or Prescolite 24" bar hangers (B24 or B6). CERTIFICATIONS: CSA certified to US and Canadian safety standards. Suitable 1 1/4" 5 3/4" for wet locations. Approved for through wiring. Non-IC 7" rated. EM and EMR is damp rated use only. ENERGY STAR qualified with open clear Alzak reflector. UL approved for * See page 5 for EM line art NSF2 splash zone applications. * See page 6 for NCT line art WARRANTY: 5 year warranty. See for details. EXAMPLE: LF6LEDG4-6LFLED5G430K EXAMPLE: LF6LED7G4120HDM-6LFLED7G435KWHWT TRIM 6LFLED5G Lumen Module 6LFLED6G Lumen Module 6LFLED7G Lumen Module LED COLOR TEMP 30K 35K 40K HDM 5 Lutron 3-wire Eco System to 1% 2DM 5 Lutron 2-wireLeading Edge to 1%(120V only) DM V dimming to 1% DMX 5 DMX with RDM dimming to <0.1% EM 2,4 BEAM ANGLE Nominal 45 degree cutoff FL35 7 Nominal 35 degree cutoff Emergency Battery Pack with integral test switch and indicator light EMR 4 Emergency Battery Pack with remote test switch and indicator light CP 9,10 Chicago Plenum REF. FINISH Semi- Diffuse REFLECTOR COLORS Clear CG Champagne Gold BL Black WE Wheat LW Light Wheat PW Pewter WH 1 White Paint 1 Requires WT option also NOTES In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Ceiling Cutout: 6 1 /4" Maximum Ceiling Thickness 1 1 /4" For conversion to millimeters, multiply inches by 25.4 Not to Scale REF. OPTIONS WT White Trim TRG 6 Trim ring gasket NCT 1,3 Non-conductive trim EM 2,4,6 Pre-punched _ reflector for integral switch. AM 7,8 Antimicrobial coating on clear Alzak reflector only CP 9,10 Chicago Plenum 2 EM options required on both housing and trim. Not compatible with FL35 reflector. 3 See page 5 for details 4 347V not available with EM or EMR 5 For HDM, DM1, DMX & 2DM options, housing output must match trim output 6 Not available with NCT 7 Not available with EM option, NCT, TRG, or FL35. EMR is compatible. 8 Clear Alzak standard. Consult factory for other reflector colors 9 Not available with EM, EMR, or DMX 10 CP must be selected on housing and trim 9 1/8" 12 3/4" 6 3/8" STANDARD 8" FL35 ACCESSORIES B24 Set of two 24" bar hangers for T-bar ceilings B6 Set of two (2) bar hangers for ceiling joist up to 24" centers LFSC6 6" reflector screw cover LFSC6 EM 6" reflector screw cover for EM SCA6D Sloped ceiling adapter (see note on spec sheet) Signos6 Architectural glass elements. Refer to specification sheets ARCH-SIG-001 and -003 LiteGear See page 4 for availability (not compatible with EM or EMR) LFR-LED-025

2 DRIVER DATA LF6LED5G4 30K LF6LED6G4 30K LF6LED7G4 30K Input Voltage V V V Input Frequency 50/60 Hz 50/60 Hz 50/60 Hz Input Current 0.12A (120v) 0.16A (120v) 0.22A (120v) (277v) 0.07A (277v) 0.10A (277v) Input Power 14.5W 19.1W 26.5W Constant Current Output mA mA mA Power Factor THD <20% <20% <20% EMI Filtering FCC 47CFR FCC 47CFR FCC 47CFR Part 15, Class A Part 15, Class A Part 15, Class A Operating Temperature -20ºC to 35ºC -20ºC to 35ºC -20ºC to 35ºC Dimming 0-10V 0-10V 0-10V Over-voltage, over-current, short-circuit protected *Power consumption and photometric output may vary slightly with HDM or 2DM driver. When operating in EM mode, the fixture will deliver approximately 30% of the published full lumen output. LiteFrame - 6" LF6LEDG4 Downlight LF6LEDG4 6LFLED5G4 30K FL35 System Wattage: 14.1W Fixture Delivered Lumens: 1051 Fixture Efficacy: 74.5 Spacing Criteria: Test No LF6LEDG4-6LFLED5G430KFL35 Test No LF6LEDG4 6LFLED5G4 30K System Wattage: 14.5W Fixture Delivered Lumens: 1157 Fixture Efficacy: 80.0 Spacing Criteria: Test No LF6LEDG4 6LFLED5G4 30K Test No

3 LF6LEDG4 6LFLED6G4 30K FL35 System Wattage: 18.7W Fixture Delivered Lumens: 1251 Fixture Efficacy: 66.9 Spacing Criteria: Test No LF6LEDG4-6LFLED6G430K FL35 Test No LF6LEDG4 6LFLED6G4 30K System Wattage: 19.1W Fixture Delivered Lumens: 1456 Fixture Efficacy: 76.2 Spacing Criteria: Test No LF6LEDG4 6LFLED6G4 30K Test No.8683

4 LF6LEDG4 6LFLED7G4 30K FL35 System Wattage: 26.0W Fixture Delivered Lumens: 1870 Fixture Efficacy: 71.9 Spacing Criteria: Test No LF6LEDG4-6LFLED7G430K FL35 Test No LF6LEDG4 6LFLED7G4 30K System Wattage: 26.4W Fixture Delivered Lumens: 2013 Fixture Efficacy: 76.1 Spacing Criteria: Test No LF6LEDG4 6LFLED7G4 30K Test No

5 LiteFrame - 6" LF6LEDG4 Downlight Dimming Compatibility Table Dimming Ballast Manufacturer Web Link DM/DM1 Lutron DVTV DM/DM1 Leviton AWRMG-7xx, AWSMG-7xx, AWSMT-7xx HDM Lutron 2DM Lutron /8" DMX See instruction 9-1/8" sheet on for connection & installation information. Other useful links: 1 EM/EMR DIMENSIONS 6-3/8" 13-3/8" 9-1/8" 5-3/4" 7" 1-1/4" 1 Central Inverters 6-3/8" For fixture full light output in back-up mode, Prescolite and Dual-lite have jointly tested the LiteFrame LED with the 100 (LG1) and 250 (LG2) VA LiteGear inverters. (Note: Not for use with integral EM option). For more information on LiteGear go to 5-3/4" 7" 1-1/4" NOTES: When ordering a sloped ceiling adapter, specify the degree of slope in 5º increments, max. of 35º. For a more precise degree or wet ceiling applications, please contact factory. Sloped ceiling adapter and housing must be installed at the same time.

6 NCT Non-Conductive Trim. Standard with Solite lens. 9" /2" A (See pg.1) 1/2" 7 7-3/4"