Tables Tops Bases and Legs Power Data Support Furniture Accessories

Transcription

1 19 Revisions P1 1/17 Order Changes and Cancellations updates P1, 15 /17 Warranty updates 1/17 Warranty updates P1 1/17 COM Fabric updates 1/17 COM Fabric updates P1 3/17 Clear knife edge undercut color P, 193, 19 /17 Vertical fabric: Mill Chicago P31 5/18 Luxury Cambria Quartz Options Added P-5, /17 Luxury Cambria Quartz: Annicca, Clareanne, Queen Anne 1/17 Luxury Cambria Quartz Options Added P, 8 1/18 XX58B@, XX8B@ $1158 XX58D@, XX8D@ $1393 P5 3/17 Step Grommet (one, center) +$18 P 5/17 Protected by US Patent No. 9,1, /18 Cable management options P81 1/17 Removed LD3FDF P8 3/17 EBZ89 and EBZ9 have inset legs at center of table P1 8/17 8 W door kits include doors P15, 131 8/17 Removed LGTRA, LGTRB, LGTRC P17 5/18 Removed LTUB, LTUA, LTNK, LTNL Added LFRA, LFRS P111, 11,13 3/17 Routing hole option available 1,1 P11 1/17 LPPC $33 P117 /18 LXPADC $11 P13, 133, 13 /18 Removed LMTA18, LMTA, LMTA3, LMTAC18, LMTAC, LMTAC3, LMCA18, LMCA, LMCA3, LMCAC18, LMCAC, LMYA18, LMYA, LMYA3, LMYAC18, LMYAC, LMYAC3 P131 5/18 Removed LMWU, LMWW, LGNK, LGNL Added LMRS, LMRA P133 5/18 Removed LMCU, LGNC P135 5/18 Removed LMWY, LGNR, Added LMRY P139 5/18 Removed LCATQ, LCATUA, LCATNK, LCATANL, Added LCRS, LCRA P1 3/18 LVTCRR for 8-7 W tops P17 7/17 LVTERBAS $13, LVTSWITCH $7 1/18 LVTERBAW $13, LVTETTBAS $1779, LVTETR $15 3/18 LVTETTBAS for 3-7 W tops 5/18 LVTERJJS $11, LVTERJJW $11 Tables Tops Bases and Legs Power Data Support Furniture Accessories P19 /18 LCAER $18, LCAER3 $, LCAERC $77, LCAERC3 $73, LCAEC $37, LCAEJ $89, LCAET $13, LCAEL $91 P17 3/17 PDEJUMPXX description P /18 Removed LCL1PC, LCLPC, LCL3PC, LCLPC, LCL5PC, LCLPC, LCL7PC, LCL8PC, LCL9PC P189 /17 Sensation Mobile Lectern Dx Wx35.5 H P19 1/17 Removed AMPM 1/18 Added AMPM $38 P GRMW $1; Removed GRMT, GRMA, GRMP P199 1/17 Removed LTR Throughout /17 Vertical Fabric: Mill Chicago 5/17 designteam@enwork.com 1/18 Storm Paint, Vertical Fabric: Era 5/18 Removed Urban Walnut Contour Laminate Specifications subject to change without prior notice. Revised 5.18

2 1 Enwork Product Information Enwork Product Information Product Information Worksurfaces (Tops) Worksurfaces are made of 1-3/1 M3 rated 5-pound, furniture-grade particle board, laminate and backer. Wood cores have IS 11 certification and are made from 98-1% post-industrial recycled contents. Wood cores have been granted Environmentally Preferable Product Certification by the CPA relating to their formeldahyde emissions, which are less than.9 PPM (CARB phase ) meeting the current California Air Resources (CARB) requirement. Grain Direction on all wood grain laminates runs as shown below. Alternative grain directions are available for a charge. Grid Worksurface Sizing Grid worksurfaces can be sized to fit into Enwork Grid frames or into another manufacturer s panel system (ex.: Steelcase Kick, Herman Miller Action Office ) as a blending solution. If you do not see a particular system in our price list, specify M for Other along with the manufacturer and system name so Enwork can work with you to fulfill your order. Standard Laminate worksurfaces are made of High Pressure Laminate (HPL) and pass all applicable industry specifications. Edge choices include 3mm, Knife or PVC Ply. Grid worksurfaces will have the selected edge profile on the front edge and a 1mm edge on the sides and back to accommodate tight worksurface-to-worksurface fit. Table worksurfaces have the 3mm or 3mm Ply PVC Edge all the way around the worksurface. Contour Laminate worksurfaces offer a seamless look (no visible edgebands or t-molds) and the attractive ergonomic Taper edge. They are made of rigid thermofoil plastic (RTF) which provides quality levels that are comparable to HPL, but are slightly more susceptible to nail polish remover and heat. Maximum depth of contour laminate is 8. Veneer Worksurfaces are available in Maple, Cherry, and Walnut. Maple, Cherry, and Walnut have an open pore finish, are natural slip-matched and full-cut (not quartered). Veneer layup on -piece conference table tops is long grain. Veneer Stains are defined by species: > Maple veneer is stained to match Kensington Maple (D) laminate. > Cherry veneer is stained to match either Wild Cherry (J) or Select Cherry (9) laminate. > Walnut veneer is stained to match either Cafelle (N), or Prestige Walnut (8) laminate. > Alternative stains are available upon request. The fee to match a stain is $7 list. Additionally, there is a 1% upcharge to each item s list price. The matching and approval process must take place prior to order entry. For stain matching approval process designteam@enwork.com or call customer service at for information. Laminate Tables with wood edge have the following solid wood edge thicknesses (top view): 1. 3mm edge is.1 wide.. Taper edge is 1.75 wide. 3. Knife edge is 1.9 wide.. Bullnose edge is 1.5 wide. Straights Curved Corner Extended Curved Corner Veneer Tables with wood edge have the following solid wood edge thicknesses (top view). 1. 3mm edge is.1 wide.. Knife edge is.1 wide (3mm). Undercut is MDF stained to match. 3. Bullnose edge is 1.5 wide.. Taper edge is 1.75 wide. 5. Ultra edge is 1.75 wide. 1 Degree Corner Cable Management Solutions are offered in a variety of styles. The following options are available: No Cable Management Edge and Grommet Finish Defaults Enwork offers the following HPL laminate finishes with default edge colors: Laminate Finish 3mm/Knife Grommet Knife Edge (MDF) Name Letter Edge Color Color Undercut Color Wilsonart Kensington Maple (177-) A Kensington Maple Grey Clear Wilsonart Monticello Maple (795-38) B Monticello Maple Grey Clear Wilsonart Wild Cherry (75-) C Wild Cherry Black Clear Wilsonart Fashion Grey (D381-) E Fashion Grey Grey Clear Wilsonart White Tigris (783-) F Medium Grey Grey Clear Wilsonart Cafelle (7933K-7) G Cafelle Black Clear Wilsonart Frosty White (1573-) M Frosty White White Clear Wilsonart Slate Grey (D91-) P Slate Grey Grey Clear Wilsonart Black (1595-) R Black Black Clear Wilsonart Brazilwood (79-38) U Brazilwood Grey Clear Wilsonart River Cherry ( ) V River Cherry Grey Clear Wilsonart Designer White (D35-) W Designer White White Clear Formica Neutral Twill (88-58) 3 Neutral Twill Grey Clear Formica Bleached Legno (885-58) Bleached Legno Grey Clear Formica Prestige Walnut (9-3) 5 Prestige Walnut Black Clear Formica Select Cherry (7759-3) 7 Select Cherry Black Clear Tip: Contour Laminate default grommet colors are as follows: Natural Maple (Grey), Designer White (Grey), Hayward Cherry (Black), Studio White (Grey), River Cherry (Grey). Tip: Veneer default grommet color is black. Laminate with veneer edge grommet color defaults to the laminate. Tip: Additional 3mm edge colors can be used. For availability and pricing, designteam@enwork.com. Tip: When specifying a special laminate, please freeform a standard edge color on order. If a non-standard edge is needed, contact designteam@enwork.com for availability and pricing. Paint Finishes Enwork offers the following paint colors: Paint/Name Black Storm Silver Medium Tone Arctic White (textured) Grommet ( to center from edge) Finish Letter R G S T W Scallops (8 W x 1. D, starts from corner) Powerlex Grommets ( from rear and 9" from side edge to center) Full Scallop (1-1/ from rear, starts.3 from corner) Some Steelcase, Herman MIller, Knoll, Haworth, and Allsteel paints are available for a $35 List fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. " 9" 3" Full Scallop (3 from rear, starts from corner) TABLES -

3 3 Enwork Finishes S = Standard U = Upcharge Tables Tops Gyration. Legs and Bases (except Solano and Gyration.), Modesty Fabrics Ped Cushions - Camira Era and the Mill Collection (except L) S S Tackboards/Grid - Camira Era, Mill L, Mill Chicago, and Lucia S S For Pixley fabric information, see page 3 For Seating fabric & mesh information, see pages 3-39 Top Laminates Wilsonart Kensington Maple (177- Matte Finish) S S S S Wilsonart Monticello Maple ( Matte Finish) S S S S Wilsonart Wild Cherry (75- Matte Finish) S S S S Wilsonart Fashion Grey (D381- Matte Finish) S S S S Wilsonart White Tigris (783- Matte Finish) S S S S Wilsonart Cafelle (7933K-7) S S S S Wilsonart Black (1595-) S S S S Wilsonart Frosty White (1573-) S S S S Wilsonart Designer White (D35- Matte Finish) S S S S Wilsonart River Cherry ( Matte Finish) S S S S Wilsonart Slate Grey (D91-) S S S S Wilsonart Brazilwood (79-38) S S S S Formica Neutral Twill (88-58, Matte Finish) S S S S Formica Bleached Legno (885-58, Matte Finish) S S S S Formica Prestige Walnut (9-3 Artisan Collection) S S S S Formica Select Cherry (7759-3, Artisan Collection) S S S S Top Laminates, Contour Natural Maple S S Hayward Cherry S S Studio White Matrix S S Designer White S S River Cherry S S Top and Casegoods Veneers Maple S S Cherry S S Walnut S S Laminate Casegoods Wilsonart Kensington Maple (177-) S S S Wilsonart Monticello Maple (795-38) S S S Wilsonart Wild Cherry (75-) S S S Wilsonart Fashion Grey (D381-) S S S Wilsonart Cafelle (7933K-7) S S S Wilsonart Black (1595-) S S S Wilsonart Frosty White (1573-) S S S Wilsonart Designer White (D35-) S S S Wilsonart River Cherry ( ) S S S Wilsonart Slate Grey (D91-) S S S Wilsonart Brazilwood (79-38) S S S Formica Bleached Legno (885-58) S S S Formica Neutral Twill (88-58, Matte Finish) S S S Formica Prestige Walnut (9-3) S S S Formica Select Cherry (7759-3) S S S Paints Black U S S S S Storm U S S S S Silver S S S S S S Medium Tone U S S S S Arctic White (textured) S U S S S S Solano CT-Series Affinity Apex Grid Enwork Supports and Bracing Worksurface (Top) Support and Bracing Rules > Conference and training table tops wide and wider come with support braces (NWBRACE) at, if required. See page for a list of how many braces are included per top. > Grid worksurfaces do not include braces due to unknown applications (peds, lats, etc.). Standard laminate worksurface (NWBRACE) support is required on unsupported spans 5 W and wider. Supports can be fixed peds, legs, or braces. > The maximum allowable span between legs or supports is 7 - even with braces. > As an alternate to braces, legs may be inset from table ends. > All 3"D tops 7"W or wider, as well as tops 3"D or deeper and "W or wider, require two braces instead of one. Braces are included automatically on all conference and table tops, if required. > Foundation Panel Base Trough Kits, Stealth, Lugano, and Concurrence conference tables are designed with support and don't utilize stand-alone (NWBRACE) braces. > For additional information about bracing installation for Training and Conference tops, please visit TABLES -

4 5 Any Top - Any Base Base Locations Any Top, 7 and 8 Round tops require braces in some applications. Any Base Foundation, Statement Individual Panel Base Location 9 Table 18. () Braces 18. Foundation Panel Base and Trough Kits 7-9 Table. Trough. TABLES Table () Conference Bases (Various types) Table () Panel Bases Trough *Worksurfaces longer than 7 must have a third leg in the middle or legs must be inset to a maximum span of 7. **See page 3 and 5 for more information. Number of Number of Number of Number of Number of Depth Width Straight Legs T/C/H Legs X/Disc Bases Conf. Bases Braces 18//3 3 1 n/a 18//3 3 1 n/a 18//3 1 n/a 18//3 8 n/a 18//3 5 n/a 18//3 n/a 1 18//3 n/a 1 18//3 7 n/a 1 18//3 78 * or * or 3 * n/a 1 18//3 8 * or * or 3 * n/a 1 18//3 9 * or * or 3 * n/a 1 18//3 9 * or * or 3 * n/a 1 3/ 3 1 n/a 3/ 1 n/a 3/ 8 1 n/a 3/ 5 n/a 3/ n/a 3/ n/a 3/ 7 n/a 3/ 78 * or * or 3 * * 3/ 8 * or * or 3 * * 3/ 9 * or * or 3 * * 3/ 9 * or * or 3 * * * or * or 3 * * 8 8 * or * or 3 * * 8 9 * or * or 3 * * 8/ 9 * or * or 3 ** ** 8/ 18 ** 3** 3** 3** 8/ 1 ** 3** 3** 3** 8/ 13 ** 3** 3** 3** 8/ 1 ** 3** 3** 3** 8/ 15 ** 3** 3** 3** 8/ 18 ** 3** 3** 3** 8/ 18 ** 3** 3** 3** 8/ 19 ** 3** 3** 3** 8/ 8** ** ** ** 8/ 1 8** ** ** ** 8/ 8 8** ** ** ** 8/ 8** ** ** ** Table -1 Table. 8 - Table. (3) Conference Bases (Various types) (3) Panel Bases () Braces.. (3) Conference Bases (Various types) () Conference Bases (Various types) () Braces () Conference Bases (Various types).. - Table 1. () Panel Bases Concurrence and Stealth Base and Trough Tables Overhang* 7-9 Table Table Width Concurrence Stealth * * Table * * Table * * - Table * * Trough 1.

5 7 Boat, Ellipse, and Racetrack Table Individual Base Depth Recommendations D > All bases must be the same depth when using Concurrence Individual Bases with beams. > Concurrence and Stealth Base and Trough Kits for 3" and "D conference rectangle tops do not fit 3" and "D Boat, Ellipse, or Capsule tops because of the tapered ends. > Foundation Base Kits are available for 3" and "D rectangle tops but not 3" and " Boat, Ellipse, or Capsule tops because of the tapered ends. Individual Panel Base Depth Recommendation for Boat Tables Total Bases Knee space Between Bases D *3 * * * *3 * * * *3 * * * * * * * Conference Table Power/Data Standard Cut-outs Centered (Qty. 1) Between Bases (Qty. ) TABLES * * * * Between Bases (Qty. 3) *These individual bases are set in 18 to center from end of table, all others are to center from end of table.

6 8 9 Table Leg and Base Specifications Concurrence > Base height is 7.75" > 7 gauge top plate > Aluminum extrusion (.9 wall thickness) construction with particle board support > 5" or 1"W individual bases > Cable access door optional on 1"W individual base > Levelers included Disc Bases > Base height is 7.75, Bar Height is.75" > 7 gauge top plate > Bolted base - 3/8 plate steel > Vertical tubing is 3 or tubing and 17 gauge or 1 gauge > Levelers (available on select part numbers) have 5/8 adjustment Impression > Leg height is 7.75 > 8 gauge foot and top plate Top plate sizes: x Straight Leg, -Post X-Base (qty. ) x 8 C, T, TT (qty. ) Legs 1 x 1 X-Base > Vertical rectangular tubing is 3 x1.5, 1 gauge for all fixed legs > Vertical square tubing is.5 x.5, 1 gauge for all fixed X bases and 1.5" x 1.5" for straight legs > 1 gauge crossbars on adjustable height legs > gauge powerlex modesty > Levelers have 1 of adjustment > Casters are all locking > Flip tables lock in up (vertical) and down (horizontal) positions and have a die cast aluminum release handle > Optional Routing Holes are W x.75 H Solano (formerly Captiva) > Leg height is 7.75 > 7 gauge steel foot > 8 gauge steel top plate Top plate sizes: x Straight Leg, -Post X-Base (qty. ) x 8 C, T, TT (qty. ) Legs 1 x 1 X-Base > Vertical rectangular tubing is 3 x1.5, 1 gauge for all fixed legs > Vertical square tubing is.5 x.5, 1 gauge for all fixed X bases and 1.5 x 1.5 for straight legs > 1 gauge crossbars on adjustable height legs > gauge powerlex modesty > Levelers have 1 of adjustment > Casters are all locking > Flip tables lock in up (vertical) and down (horizontal) positions and have a die cast aluminum release handle > Optional Routing Holes are W x.75 H TABLES - Foundation Panel Bases > Base height is 7.75 > 3/ double sided melamine construction, cam lock and doweled > Levelers included Foundation Drum Bases > Base height is 7.75 > 1/ BendiPly wrapping, 3/ thick HPL construction > Levelers included Gyration Tubular Legs > Leg height is 7.75 > 7 gauge top plate > Fully welded construction > Vertical tubing is 1.5 diameter, 1 gauge > Levelers are 3/8-1.1 > Casters are 3 Nylon Twin Wheel with brake and all locking Blade Legs > Leg height is 7.75 > 7 gauge top plate > Fully welded construction > Vertical tubing is 1.9 diameter, 1 gauge > Feet are made of. laser cut plate steel > Levelers are 3/8-1x1 > Casters are 3 Nylon Twin Wheel with brake and all locking > Flip tables lock in up (vertical) and down (horizontal) positions and have a die cast aluminum release handle Lugano > Post-formed laminate cabinet > 11- and 1-gauge steel mitered, tapered plinth and top plate > Electric height-adjustable range is > Electric height-adjustable base supports 3 lbs. > Levelers included Sawhorse > Leg height is 7.75 > Vertical rectangular tubing is 3 x1.5, 1 gauge > Levelers have 1 of adjustment > Square tubing is 1.5" x 1.5", 1 gauge > 7 gauge top plate Sensation > Leg height is 7.75 > 7 gauge top plate Top plate sizes: x Straight Leg, -Post X-Base (qty. ) x 8 C, T, TT (qty. ), Y Legs, Split Y-Leg Bases 9.5 x 9.5 LMXA/LMXB X-Bases 1 x 1 LMXC/LMXD X-Bases, LMYB Y-Leg Bases > Pin set adjustable height is > Welded column, bolted feet construction > Feet are made of die cast aluminum > Vertical tubing is.3 diameter, 1 gauge > Levelers are 3/8-1x1 > Casters are 3 Nylon Twin Wheel with brake and all locking > Flip tables lock in up (vertical) and down (horizontal) positions and have a die cast aluminum release handle > Optional Routing Holes are 1.5 diameter. Solano Fast Crank > Height range is - (including top) > Lifts 11 lbs when moving, 1 lbs when static (load capacity includes weight of worksurface) > Requires approximately two turns per inch Square Bases > Base height is 7.75, Bar Height is.75" > 7 gauge top plate > Bolted base - 3/8 plate steel > Vertical tubing is 3 or tubing and 17 gauge or 1 gauge > Levelers (available on select part numbers) have 5/8 adjustment Stealth > Base height is 7.75" > Aluminum extrusion.9 wall thickness) construction with particle board support > Levelers included > 7 gauge top plate Value > Leg height is 7.75 > 7 gauge top plate > Fully welded construction > Vertical tubing is 1.9 diameter, 1 gauge > Horizontal feet are 1.9 diameter tubing, 1 gauge > Levelers are 3/8-1x1.375 > Casters are Nylon Twin Wheel with brake and all locking > Flip tables lock in up (vertical) and down (horizontal) positions and have a die cast aluminum release handle

7 3 31 Top (Worksurface) Specifications Designer Finish Top Specifications General Information on Wood Cores > Passes all NEMA and BIFMA tests for high pressure laminate worksurfaces. > Core material is 1.15 thick, M3 rated (5 lb.) furniture grade particleboard. > FSC Mixed Sources accreditation. > ISO 11 certification for wood cores. > Made from 3% post-consumer and 7% pre-consumer recycled content. > Eco-Certified Composite Grademark Program (ECC) certified by Composite Panel Association (CPA). > CARB Phase compliant for formaldehyde emissions less than.9ppm. > Adhesives are solvent free water based PVA (poly vinyl acetate). > Formaldehyde-free cores are available via special quote at > Tables have a pound load capacity (functional load). Standard Laminates > HPL (high pressure laminate) construction,.3 or.5" thick depending on color. > Backer is moisture-resistant phenolic material for balanced construction. > Laminates and backers are Greenguard certified for Indoor Air Quality. > PVC (default) or ABS (upon request) edge choices in 3mm, and Knife. > Other edge choices include Veneer and Solid Wood. Contour Laminates > Commonly known as Rigid Thermofoil (RTF). > Contour Laminate is high performance, with comparable durability to HPL laminate. > The taper edge is seamless with no visible edgeband or t-molds, offering an inherent anti-microbial sealed surface. Woods > Natural veneers are used in Maple, Cherry, and Walnut species. > Two and three piece tops use full-cut slip-matched veneers. > Edge choices in 3mm (wood), Taper (solid wood), Knife (wood), Bullnose (solid wood) and Ultra (sold wood). Back-Painted Glass > 3/8 thick, annealed, flat-polished low iron. Available as clear glass (B) or satin-etched/frosted glass (D). 1-1/8 knife edge MDF substrate* painted to match. Brilliant white as standard (matches Benjamin Moore brilliant white paint). Any Benjamin Moore color available upon request. $ list custom color fee applies for orders of less than 5 sq. ft. There is also a % upcharge to each top s list price for custom colors. Actual depth of D tops is 59 due to yield. Due to weight of material, some tops will include an extra piece of glass to help avoid damage during handling and installation. Top substrates will remain the standard number of pieces. See below for the top shapes and sizes affected. Rectangle, Rounded Rectangle, Boat, Capsule, and Wedge Tops: 5/ D x 15/18/18/19 W 3-piece glass, -piece substrate 5/ D x 8/ W -piece glass, 3-piece substrate KrystalCast > Acrylic on MDF* or birch ply is available in any Benjamin Moore color. Super White is by far the most popular. See for technical specs and care instructions. Solid Surface (Wilsonart) > Designer White as standard. See solid-surfaces/designs for additional finish/color choices. Price varies by finish/color, contact designteam@enwork.com with your preferred selection. Quartz (Cambria) > See for finish/color choices. 13/1" thick. Undersized 1-1/8" knife edge substrate* painted black. Due to sheet size availability, some "D (only) tops come in twice the quantity of pieces. (For example, a top that normally comes in 3 pieces will come in pieces.) All Cambria designs are available in matte finish. Contact designteam@enwork.com for additional information. **There is a 3% upcharge for Luxury Cambria Quartz Colors: Annicca, Blackpool Matte, Brittanicca, Brittanicca Gold, Brittanicca Warm, Clareanne, Delgatie, Ella, Ironsbridge, Levven, Mersey, Oakmoor, Queen Anne, Roxwell, Skara Brae, and Whitecliff. Tip: Due to the extra weight, Quartz conference table tops are only recommended for use on Concurrence, Stealth, and Foundation (with trough) table bases. Birch Ply Edges > Edge is clear coated when specified with laminate and stained-to-match when sold with veneer. Actual width of 9"W is 95". Actual width of 19"W is 19" due to yield. TABLES - * The sides and cut of MDF substrates are painted. The top and bottom of the substrate is not painted.

8 3 33 Training Table Tops (18 D) (XX) Top Shape Prefix List: (CR) Rectangle STEP (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look ** K Standard Laminate Knife Edge (front only, sides/back flat) C Standard Laminate Knife Edge (all sides) ** T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge P Standard Veneer 3mm Wood Edge (SF) Rounded Rectangle > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE STANDARD LAMINATE STANDARD VENEER TABLES - ** Knife edge only available if CR is chosen in Step 1. Taper edge is front only, sides/back flat if CR is chosen in Step 1. STEP 3 (@) Cable Management Suffix List: N No Cable Management G Grommet (one, center rear) +$18 P Powerlex Grommet (one left, one right) +$3 U Power/Data Cut-out (one, center rear) +$3 K Power/Data Cut-out (one, center of table) +$3 X Other TBD STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and +19% NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, +5% Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE ** BRACES Suffix K INCLD. Part Number Suffix A Suffix L Suffix C ** Suffix T XX183&@# $3 $ $99 $ XX183&@# $9 $8 $33 $ XX18&@# $8 $3 $3 $ XX188&@# $31 $3 $391 $ XX185&@# $37 $7 $83 $ XX18&@# $9 $93 $557 $ XX18&@# $75 $5 $17 $ XX187&@# $75 $5 $17 $ XX1878&@# $ $9 $787 $ XX188&@# $ $9 $787 $ XX189&@# $19 $711 $8 $ XX189&@# $19 $711 $8 $83 3MM WOOD EDGE 3MM WOOD EDGE BRACES INCLD. Part Number Suffix E Suffix P XX183&@# $3 $ XX183&@# $51 $ XX18&@# $575 $ XX188&@# $8 $ XX185&@# $71 $ XX18&@# $873 $ XX18&@# $95 $ XX187&@# $117 $ XX1878&@# $19 $ XX188&@# $11 $ XX189&@# $138 $ XX189&@# $139 $19 *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1%

9 3 35 Training Table Tops ( D) (XX) Top Shape Prefix List: (CR) Rectangle STEP (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look ** K Standard Laminate Knife Edge (front only, sides/back flat) C Standard Laminate Knife Edge (all sides) ** T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge P Standard Veneer 3mm Wood Edge (SF) Rounded Rectangle > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE STANDARD LAMINATE STANDARD VENEER TABLES - ** Knife edge only available if CR is chosen in Step 1. Taper edge is front only, sides/back flat if CR is chosen in Step 1. STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center rear) +$18 P Powerlex Grommet (one left, one right) +$3 U Power/Data Cut-out (one, center rear) +$3 K Power/Data Cut-out (one, center of table) +$3 X Other TBD STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and +19% NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, +5% Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE ** BRACES Suffix K INCLD. Part Number Suffix A Suffix L Suffix C ** Suffix T - XX&@# $ $55 $88 $3 3 - XX3&@# $33 $7 $3 $ XX3&@# $55 $93 $331 $38 - XX&@# $85 $37 $37 $ XX8&@# $38 $35 $ $1 5 - XX5&@# $37 $3 $8 $ XX&@# $3 $9 $51 $ XX&@# $79 $55 $ $ XX7&@# $79 $55 $ $ XX78&@# $9 $7 $791 $ XX8&@# $9 $7 $791 $ XX9&@# $ $715 $88 $ XX9&@# $ $715 $88 $88 3MM WOOD EDGE 3MM WOOD EDGE BRACES INCLD. Part Number Suffix E Suffix P - XX&@# $9 $ XX3&@# $53 $1 3 - XX3&@# $5 $718 - XX&@# $715 $ XX8&@# $8 $ XX5&@# $895 $ XX&@# $1 $ XX&@# $1155 $ XX7&@# $1 $ XX78&@# $1337 $ XX8&@# $1 $ XX9&@# $1515 $ XX9&@# $13 $1851 *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1%

10 3 37 Training Table Tops (3 D) (XX) Top Shape Prefix List: (CR) Rectangle STEP (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look ** K Standard Laminate Knife Edge (front only, sides/back flat) C Standard Laminate Knife Edge (all sides) ** T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge P Standard Veneer 3mm Wood Edge (SF) Rounded Rectangle > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE STANDARD LAMINATE STANDARD VENEER TABLES - ** Knife edge only available if CR is chosen in Step 1. Taper edge is front only, sides/back flat if CR is chosen in Step 1. STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center rear) +$18 P Powerlex Grommet (one left, one right) +$3 U Power/Data Cut-out (one, center rear) +$3 K Power/Data Cut-out (one, center of table) +$3 X Other TBD STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and +19% NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, +5% Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE ** BRACES Suffix K INCLD. Part Number Suffix A Suffix L Suffix C ** Suffix T XX33&@# $8 $3 $39 $ XX33&@# $3 $37 $1 $ XX3&@# $35 $ $55 $ XX38&@# $37 $3 $8 $ XX35&@# $1 $57 $573 $ XX3&@# $98 $57 $7 $ XX3&@# $571 $5 $7 $ XX37&@# $555 $38 $71 $ XX378&@# $73 $773 $87 $ XX38&@# $73 $773 $87 $ XX39&@# $71 $8 $911 $ XX39&@# $71 $8 $911 $1197 3MM WOOD EDGE 3MM WOOD EDGE BRACES INCLD. Part Number Suffix E Suffix P XX33&@# $3 $ XX33&@# $75 $ XX3&@# $857 $ XX38&@# $9 $ XX35&@# $173 $ XX3&@# $1 $ XX3&@# $138 $ XX37&@# $17 $ XX378&@# $158 $ XX38&@# $188 $ XX39&@# $1795 $ XX39&@# $19 $ *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1%

11 38 39 Training Table Tops (3 D) (XX) Top Shape Prefix List: (CR) Rectangle STEP (CA) Racetrack (Capsule) (SF) Rounded Rectangle (BT) Boat (EL) Ellipse Tip: Ellipse tops only available up to 1 W. (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look ** K Standard Laminate Knife Edge (front only, sides/back flat) C Standard Laminate Knife Edge (all sides) ** T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge P Standard Veneer 3mm Wood Edge ** Q Standard Veneer Taper Wood Edge ** R Standard Veneer Knife w/ 3mm Wood Edge ** U Standard Veneer Bullnose Wood Edge ** V Standard Veneer Ultra Wood Edge ** Knife edge only available if CR is chosen in Step 1. If CR is chosen in Step 1: Suffix T, Q, R, U, and V edge is front only, sides/back flat. STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center rear) +$18 P Powerlex Grommet (one left, one right) +$3 U Power/Data Cut-out (one, center rear) +$3 K Power/Data Cut-out (one, center of table) +$3 X Other TBD D > D is 1" less than on Boat tops. > Veneer knife wood edge (R) is.1 wide (3mm). > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE ** BRACES Suffix K INCLD. Part Number Suffix A Suffix L Suffix C ** Suffix T XX33&@# $3 $397 $9 $ XX3&@# $1 $71 $533 $ XX38&@# $38 $53 $59 $ XX35&@# $539 $19 $7 $ XX3&@# $71 $8 $911 $ XX3&@# $771 $88 $1 $ XX37&@# $771 $88 $1 $ XX378&@# $931 $17 $11 $ XX38&@# $931 $17 $11 $ XX39&@# $931 $17 $11 $ XX39&@# $931 $17 $11 $15 STANDARD LAMINATE STANDARD VENEER 3MM 3MM TAPER KNIFE w/ 3MM BULLNOSE ULTRA WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE BRAES INCLD. Part Number Suffix E Suffix P ** Suffix Q ** Suffix R ** Suffix U ** Suffix V XX33&@# $87 $11 n/a n/a n/a n/a 3 - XX3&@# $11 $111 n/a n/a n/a n/a XX38&@# $11 $139 n/a n/a n/a n/a XX35&@# $15 $155 n/a n/a n/a n/a 3 - XX3&@# $1535 $17 n/a n/a n/a n/a 3 - XX3&@# $13 $191 n/a n/a n/a n/a XX37&@# $178 $5 $83 $181 $539 $ XX378&@# $1913 $9 n/a n/a n/a n/a XX38&@# $3 $35 $33 $75 $88 $ XX39&@# $159 $98 n/a n/a n/a n/a XX39&@# $83 $3 $3597 $7 $38 $3597 TABLES - STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and NT finishes) +19% and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica +5% Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1%

12 1 Conference Table Tops (3 D) (XX) Top Shape Prefix List: STEP (SF) Rounded (CR) Rectangle Rectangle (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look K Standard Laminate Knife Edge T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge F Standard Laminate Taper Wood Edge G Standard Laminate Knife Wood Edge H Standard Laminate Bullnose Wood Edge P Standard Veneer 3mm Wood Edge Q Standard Veneer Taper Wood Edge R Standard Veneer Knife w/ 3mm Wood Edge U Standard Veneer Bullnose Wood Edge V Standard Veneer Ultra Wood Edge B Back-Painted Glass on 1-1/8" Knife Edge MDF D Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDF 5 KrystalCast on MDF - Knife Edge KrystalCast on Ply - Flat Ply Edge M Designer White Solid Surface (Wilsonart) - 1/8 Flat Edge N Designer White Solid Surface (Wilsonart) - 1-1/" Knife Edge J **Quartz (Cambria) on MDF - 3mm Edge Y Statement Laminate Top - 1/8 Flat Ply Edge 3 Statement Laminate Top - Knife Ply Edge Z Statement Veneer Top - 1/8 Flat Ply Edge Statement Veneer Top - Knife Ply Edge D (BT) Boat (CA) Racetrack (Capsule) STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Pwr/Data Cut-out, Centered (all size tops) +$3 C Two Pwr/Data Cut-outs, Between Bases (-pc tops) +$7 D Two Pwr/Data Cut-outs, Between Outer Bases (3-pc tops) +$7 E Three Pwr/Data Cut-outs, Between Bases (3-pc tops) +$18 F Foundation Trough Door Kit Cut Out (n/a Designer Finishes) +$99 X Other TBD > Edge profile is the same on all sides. > D is 1" less than on Boat tops. > Multi-piece tops come with alignment hardware. > See page 31 for Designer Finish specifications. > Laminate knife wood edge (G) is 1.9 wide. Veneer knife wood edge (R) is.1 wide (3mm). (EL) Ellipse Tip: Ellipse tops only available up to 1 W. > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer **3% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details. STANDARD LAMINATE CONTOUR LAMINATE STANDARD LAMINATE WOOD EDGE PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES INCLD. Part Number Suffix A Suffix L Suffix K Suffix T BRACES INCLD. Part Number 3MM TAPER KNIFE BULLNOSE 3MM WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE Designer Finishes DESIGNER WHITE STATEMENT KRYSTALCAST KRYSTALCAST SOLID SURFACE **QUARTZ LAMINATE TOP W/ ON MDF ON PLY (WILSONART) (CAMBRIA) BIRCH PLY EDGE 3 18 pcs XX318&@# $1178 $135 $1531 $ pcs XX31&@# $113 $139 $157 $ pcs XX313&@# $1333 $153 $173 $5 3 1 pcs XX31&@# $13 $157 $1775 $ pcs XX315&@# $15 $11 $1878 $ pcs XX318&@# $1793 $1 $33 $ pcs XX318&@# $1 $313 $15 $ pcs XX319&@# $ $33 $ $ pcs XX3&@# $3 $95 $37 $ pcs XX31&@# $359 $71 $3 $ pcs XX38&@# $85 $377 $375 $15 3 3pcs XX3&@# $389 $378 $75 $51 STANDARD VENEER TAPER WOOD EDGE KNIFE w/ 3MM BULLNOSE ULTRA WOOD EDGE WOOD EDGE WOOD EDGE Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V 3 18 pcs XX318&@# $33 $158 $58 $3751 $377 $87 $ $71 $ pcs XX31&@# $355 $5 $53 $1 $1 $533 $37 $897 $ pcs XX313&@# $38 $93 $5 $57 $51 $5795 $81 $53 $ pcs XX31&@# $175 $5313 $57 $88 $879 $51 $5187 $577 $ pcs XX315&@# $8 $597 $5833 $51 $55 $71 $551 $17 $ pcs XX318&@# $51 $8 $551 $5837 $5939 $79 $ $91 $ pcs XX318&@# $5533 $71 $7751 $77 $35 $813 $75 $77 $ pcs XX319&@# $58 $7838 $8198 $711 $7 $8 $75 $7917 $8 3 3pcs XX3&@# $575 $8777 $9178 $797 $77 $95 $795 $88 $ pcs XX31&@# $81 $939 $935 $87 $781 $99 $89 $91 $ pcs XX38&@# $71 $985 $9899 $8 $81 $1,17 $87 $9 $1,17 3 3pcs XX3&@# $7559 $993 $1,3 $99 $813 $1,911 $919 $1,5 $1,911 STEP - Laminate, Veneer, and Statement Ply Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and NT finishes) +19% and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica +5% Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: (n/a on Statement Ply) G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1% WHITE WHITE BACK-PAINTED BACK-PAINTED GLASS (FROSTED) GLASS ON MDF ON MDF STATEMENT VENEER TOP W/ BIRCH PLY EDGE For other color options, see page 31. BRACES INCLD. Part Number KNIFE EDGE Suffix B KNIFE EDGE Suffix D 3 7 XX37&@ $595 $ XX38&@ $13 $ XX39&@ $79 $ pcs XX318&@ $11,79 $13, pcs XX31&@ $1,5 $1, pcs XX313&@ $13,51 $15, pcs XX31&@ $1,33 $1, pcs XX315&@ $15,3 $17, pcs XX318&@ $1,17 $19, pcs XX318&@ $1,993 $, pcs XX319&@ $18,9 $1, pcs XX3&@ $,8 $, pcs XX31&@ $1,35 $5, pcs XX38&@ $,77 $,8 3 3pcs XX3&@ $3,5 $7,77 KNIFE EDGE BRACES INCLD. Part Number Suffix 5 FLAT PLY EDGE Suffix -1/8 FLAT EDGE Suffix M 1 1/ KNIFE EDGE FLAT EDGE Suffix N Suffix J -1/8" FLAT EDGE Suffix Y 1-1/"KNIFE EDGE Suffix 3-1/8" FLAT EDGE Suffix Z 1-1/"KNIFE EDGE Suffix 3 7 XX37&@# $587 $71 $7 $5 $798 $89 $37 $3 $3 3 8 XX38&@# $851 $789 $718 $85 $9 $339 $3 $38 $8 3 9 XX39&@# $817 $933 $89 $737 $1,5 $3587 $7 $5 $ pcs XX318&@# $13,8 $15,33 $11,3 $1,51 $15,81 $935 $55 $5535 $ pcs XX31&@# $1,991 $1,85 $1,53 $11,1 $17,57 $531 $588 $5988 $ pcs XX313&@# $1,95 $18,3 $13,8 $1,71 $19,33 $57 $38 $51 $7 3 1 pcs XX31&@# $17, $19,838 $1,8 $13,83 $1,89 $9 $73 $891 $ pcs XX315&@# $18,95 $1,38 $1,3 $1,93 $,8 $81 $711 $735 $ pcs XX318&@# $,11 $,8 $17,1 $1,3 $,3 $88 $758 $7797 $ pcs XX318&@# $1,51 $,31 $18,35 $17,1 $,31 $755 $81 $89 $ pcs XX319&@# $,8 $5,83 $19,85 $18, $8,119 $7 $839 $871 $ pcs XX3&@# $5,78 $8,87 $, $19,3 $9,877 $81 $9351 $959 $1, pcs XX31&@# $,983 $3,339 $1,85 $,7 $31,33 $877 $95 $997 $1, pcs XX38&@# $8,89 $31,89 $,95 $1,58 $33,391 $911 $1,79 $1, $11,3 3 3pcs XX3&@# $9,59 $33,3 $,15 $,8 $35,18 $955 $1,57 $1,877 $11,83 TABLES -

13 3 Conference Table Tops ( D) (XX) Top Shape Prefix List: STEP (SF) Rounded (CR) Rectangle Rectangle (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look K Standard Laminate Knife Edge T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge F Standard Laminate Taper Wood Edge G Standard Laminate Knife Wood Edge H Standard Laminate Bullnose Wood Edge P Standard Veneer 3mm Wood Edge Q Standard Veneer Taper Wood Edge R Standard Veneer Knife w/ 3mm Wood Edge U Standard Veneer Bullnose Wood Edge V Standard Veneer Ultra Wood Edge B Back-Painted Glass on 1-1/8" Knife Edge MDF D Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDF 5 KrystalCast on MDF - Knife Edge KrystalCast on Ply - Flat Ply Edge M Designer White Solid Surface (Wilsonart) - 1/8 Flat Edge N Designer White Solid Surface (Wilsonart) - 1-1/" Knife Edge J **Quartz (Cambria) on MDF - 3mm Edge Y Statement Laminate Top - 1/8 Flat Ply Edge 3 Statement Laminate Top - Knife Ply Edge Z Statement Veneer Top - 1/8 Flat Ply Edge Statement Veneer Top - Knife Ply Edge D (BT) Boat (CA) Racetrack (Capsule) STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Pwr/Data Cut-out, Centered (all size tops) +$3 C Two Pwr/Data Cut-outs, Between Bases (-pc tops) +$7 D Two Pwr/Data Cut-outs, Between Outer Bases (3-pc tops) +$7 E Three Pwr/Data Cut-outs, Between Bases (3-pc tops) +$18 F Foundation Trough Door Kit Cut Out (n/a Designer Finishes) +$99 X Other TBD STEP - Laminate, Veneer, and Statement Ply Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. (EL) Ellipse Tip: Ellipse tops only available up to 1 W. > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. STANDARD LAMINATE WOOD EDGE PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES INCLD. Part Number Suffix A Suffix L Suffix K Suffix T BRACES INCLD. Part Number 3MM TAPER KNIFE BULLNOSE 3MM WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE STANDARD LAMINATE CONTOUR LAMINATE Designer Finishes DESIGNER WHITE KRYSTALCAST KRYSTALCAST SOLID SURFACE **QUARTZ ON MDF ON PLY (WILSONART) (CAMBRIA) STATEMENT LAMINATE TOP W/ BIRCH PLY EDGE STATEMENT VENEER TOP W/ BIRCH PLY EDGE KNIFE EDGE BRACES INCLD. Part Number Suffix 5-1/8" FLAT EDGE -1/8" FLAT EDGE XX&@# $53 $5 $588 $1 8 XX8&@# $51 $591 $8 $17 5 XX5&@# $3 $93 $783 $135 XX&@# $755 $88 $981 $1515 XX&@# $83 $95 $181 $113 7 XX7&@# $83 $95 $181 $ XX78&@# $93 $18 $15 $ XX8&@# $93 $18 $15 $ XX9&@# $998 $117 $197 $ XX9&@# $998 $117 $197 $ pcs XX18&@# $1381 $1588 $1795 $33 1 pcs XX1&@# $1 $135 $188 $38 13 pcs XX13&@# $198 $17 $197 $5 1 pcs XX1&@# $1535 $175 $1995 $9 15 pcs XX15&@# $175 $9 $9 $7 18 pcs XX18&@# $18 $1 $397 $ pcs XX18&@# $1 $313 $15 $37 19 pcs XX19&@# $ $33 $ $378 3pcs XX&@# $11 $77 $313 $ pcs XX1&@# $ $789 $3153 $39 8 3pcs XX8&@# $85 $377 $375 $15 3pcs XX&@# $389 $378 $75 $51 WHITE WHITE BACK-PAINTED BACK-PAINTED GLASS (FROSTED) GLASS ON MDF ON MDF STANDARD VENEER TAPER WOOD EDGE KNIFE w/ 3MM BULLNOSE ULTRA WOOD EDGE WOOD EDGE WOOD EDGE Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V XX&@# $1118 $15 $171 $115 $131 $199 $115 $1711 $199 8 XX8&@# $153 $188 $1891 $1573 $13 $15 $118 $193 $15 5 XX5&@# $1397 $ $73 $1735 $19 $38 $178 $95 $38 XX&@# $197 $3 $1 $5 $1953 $737 $11 $5 $737 XX&@# $183 $5 $597 $17 $1 $99 $8 $ $99 7 XX7&@# $197 $95 $77 $37 $83 $315 $9 $835 $ XX78&@# $115 $873 $958 $538 $5 $338 $19 $33 $338 8 XX8&@# $5 $37 $3138 $9 $11 $3577 $78 $33 $ XX9&@# $39 $35 $331 $853 $77 $3783 $953 $315 $ XX9&@# $57 $3397 $393 $31 $935 $3991 $311 $3 $ pcs XX18&@# $33 $158 $58 $3751 $377 $87 $ $71 $877 1 pcs XX1&@# $355 $5 $53 $1 $1 $533 $37 $897 $ pcs XX13&@# $38 $93 $5 $57 $51 $5795 $81 $53 $ pcs XX1&@# $175 $5313 $57 $88 $879 $51 $5187 $577 $51 15 pcs XX15&@# $8 $597 $5833 $51 $55 $71 $551 $17 $71 18 pcs XX18&@# $51 $8 $551 $5837 $5939 $79 $ $91 $79 18 pcs XX18&@# $5533 $71 $7751 $77 $35 $813 $75 $77 $ pcs XX19&@# $58 $7838 $8198 $711 $7 $8 $75 $7917 $8 3pcs XX&@# $575 $8777 $9178 $797 $77 $95 $795 $88 $95 1 3pcs XX1&@# $81 $939 $935 $87 $781 $99 $89 $91 $99 8 3pcs XX8&@# $71 $985 $9899 $8 $81 $1,17 $87 $9 $1,17 3pcs XX&@# $7559 $993 $1,3 $99 $813 $1,911 $919 $1,5 $1,911 For other color options, see page % +19% +5% *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: (n/a on Statement Ply) G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) > Edge profile is the same on all sides. > D is 1" less than on Boat tops. > Multi-piece tops come with alignment hardware. > See page 31 for Designer Finish specifications. > Laminate knife wood edge (G) is 1.9 wide. Veneer knife wood edge (R) is.1 wide (3mm). Laminate & Veneer **3% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details. +1% BRACES INCLD. Part Number KNIFE EDGE Suffix B KNIFE EDGE Suffix D 7 XX7&@ $7 $785 8 XX8&@ $751 $881 9 XX9&@ $895 $ pcs XX18&@ $11,79 $13,57 1 pcs XX1&@ $1,5 $1,73 13 pcs XX13&@ $13,51 $15,79 1 pcs XX1&@ $1,33 $1,85 15 pcs XX15&@ $15,3 $17,9 18 pcs XX18&@ $1,17 $19,57 18 pcs XX18&@ $1,993 $, pcs XX19&@ $18,9 $1,819 3pcs XX&@ $,8 $,9 1 3pcs XX1&@ $1,35 $5,1 8 3pcs XX8&@ $,77 $,8 3pcs XX&@ $3,5 $7,77 FLAT PLY EDGE Suffix -1/8 FLAT EDGE Suffix M 1 1/ KNIFE EDGE FLAT EDGE Suffix N Suffix J Suffix Y 1-1/"KNIFE EDGE Suffix 3 Suffix Z 1-1/"KNIFE EDGE Suffix 7 XX7&@# $739 $817 $75 $1 $9 $3139 $3519 $39 $387 8 XX8&@# $8381 $95 $815 $739 $1,7 $387 $397 $389 $313 9 XX9&@# $95 $1,87 $917 $837 $1,3 $3833 $9 $98 $75 18 pcs XX18&@# $13,8 $15,33 $11,3 $1,51 $15,81 $935 $55 $5535 $57 1 pcs XX1&@# $1,991 $1,85 $1,53 $11,1 $17,57 $531 $588 $5988 $59 13 pcs XX13&@# $1,95 $18,3 $13,8 $1,71 $19,33 $57 $38 $51 $7 1 pcs XX1&@# $17, $19,838 $1,8 $13,83 $1,89 $9 $73 $891 $ pcs XX15&@# $18,95 $1,38 $1,3 $1,93 $,8 $81 $711 $735 $83 18 pcs XX18&@# $,11 $,8 $17,1 $1,3 $,3 $88 $758 $7797 $ pcs XX18&@# $1,51 $,31 $18,35 $17,1 $,31 $755 $81 $89 $97 19 pcs XX19&@# $,8 $5,83 $19,85 $18, $8,119 $7 $839 $871 $998 3pcs XX&@# $5,78 $8,87 $, $19,3 $9,877 $81 $9351 $959 $1,8 1 3pcs XX1&@# $,983 $3,339 $1,85 $,7 $31,33 $877 $95 $997 $1,85 8 3pcs XX8&@# $8,89 $31,89 $,95 $1,58 $33,391 $911 $1,79 $1, $11,3 3pcs XX&@# $9,59 $33,3 $,15 $,8 $35,18 $955 $1,57 $1,877 $11,83 TABLES -

14 5 Conference Table Tops (8 D) (XX) Top Shape Prefix List: D STEP (SF) Rounded (CR) Rectangle Rectangle (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look K Standard Laminate Knife Edge T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge F Standard Laminate Taper Wood Edge G Standard Laminate Knife Wood Edge H Standard Laminate Bullnose Wood Edge P Standard Veneer 3mm Wood Edge Q Standard Veneer Taper Wood Edge R Standard Veneer Knife w/ 3mm Wood Edge U Standard Veneer Bullnose Wood Edge V Standard Veneer Ultra Wood Edge B Back-Painted Glass on 1-1/8" Knife Edge MDF D Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDF 5 KrystalCast on MDF - Knife Edge KrystalCast on Ply - Flat Ply Edge M Designer White Solid Surface (Wilsonart) - 1/8 Flat Edge N Designer White Solid Surface (Wilsonart) - 1-1/" Knife Edge J **Quartz (Cambria) on MDF - 3mm Edge Y Statement Laminate Top - 1/8 Flat Ply Edge 3 Statement Laminate Top - Knife Ply Edge Z Statement Veneer Top - 1/8 Flat Ply Edge Statement Veneer Top - Knife Ply Edge **3% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details. STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Pwr/Data Cut-out, Centered (all size tops) +$3 C Two Pwr/Data Cut-outs, Between Bases (-pc tops) +$7 D Two Pwr/Data Cut-outs, Between Outer Bases (3-pc tops) +$7 E Three Pwr/Data Cut-outs, Between Bases (3-pc tops) +$18 F Foundation Trough Door Kit Cut Out (n/a Designer Finishes) +$99 X Other TBD STEP - Laminate, Veneer, and Statement Ply Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. (BT) Boat (CA) Racetrack (Capsule) (EL) Ellipse Tip: Ellipse tops only available up to 1 W. D (WC) Wedge Tip: Wedge tops available 7- W. > Edge profile is the same on all sides. > D is 1" less than on Boat tops. > For wedge tops, 7-9 W D is 1 less than ; W D is 18 less than ; - W D is less than. > Multi-piece tops come with alignment hardware. > See page 31 for Designer Finish specifications. > Laminate knife wood edge (G) is 1.9 wide. Veneer knife wood edge (R) is.1 wide (3mm). > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES INCLD. Part Number Suffix A Suffix L Suffix K Suffix T 8 8 XX88&@# $51 $591 $8 $ XX85&@# $3 $93 $783 $111 8 XX8&@# $755 $88 $981 $ XX8&@# $83 $95 $181 $ XX87&@# $83 $95 $181 $ XX878&@# $93 $18 $15 $ XX88&@# $93 $18 $15 $ XX89&@# $998 $117 $197 $ XX89&@# $998 $117 $197 $ pcs XX818&@# $1381 $1588 $1795 $ pcs XX81&@# $1 $135 $188 $ pcs XX813&@# $198 $17 $197 $5 8 1 pcs XX81&@# $1535 $175 $1995 $ pcs XX815&@# $175 $9 $9 $ pcs XX818&@# $18 $1 $397 $ pcs XX818&@# $1 $313 $15 $ pcs XX819&@# $ $33 $ $ pcs XX8&@# $11 $77 $313 $ pcs XX81&@# $ $789 $3153 $ pcs XX88&@# $85 $377 $375 $ pcs XX8&@# $389 $378 $75 $51 Designer Finishes WHITE WHITE BACK-PAINTED BACK-PAINTED GLASS (FROSTED) GLASS ON MDF ON MDF STANDARD LAMINATE WOOD EDGE STANDARD VENEER BRACES INCLD. Part Number 3MM TAPER KNIFE BULLNOSE 3MM WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE TAPER WOOD EDGE KNIFE w/ 3MM BULLNOSE ULTRA WOOD EDGE WOOD EDGE WOOD EDGE Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V 8 8 XX88&@# $11 $1 $89 $175 $18 $38 $185 $115 $ XX85&@# $158 $15 $87 $199 $1833 $18 $199 $33 $18 8 XX8&@# $1885 $57 $ $5 $18 $38 $3 $7 $38 8 XX8&@# $1 $73 $83 $3 $33 $338 $533 $918 $ XX87&@# $19 $735 $339 $9 $55 $3 $717 $319 $ XX878&@# $355 $315 $337 $797 $733 $398 $98 $33 $ XX88&@# $59 $331 $333 $971 $91 $39 $393 $3555 $ XX89&@# $ $353 $331 $317 $311 $155 $381 $379 $ XX89&@# $818 $37 $38 $333 $3 $37 $38 $39 $ pcs XX818&@# $33 $158 $58 $3751 $377 $87 $ $71 $ pcs XX81&@# $355 $5 $53 $1 $1 $533 $37 $897 $ pcs XX813&@# $38 $93 $5 $57 $51 $5795 $81 $53 $ pcs XX81&@# $175 $5313 $57 $88 $879 $51 $5187 $577 $ pcs XX815&@# $8 $597 $5833 $51 $55 $71 $551 $17 $ pcs XX818&@# $51 $8 $551 $5837 $5939 $79 $ $91 $ pcs XX818&@# $5533 $71 $7751 $77 $35 $813 $75 $77 $ pcs XX819&@# $58 $7838 $8198 $711 $7 $8 $75 $7917 $8 8 3 pcs XX8&@# $575 $8777 $9178 $797 $77 $95 $795 $88 $ pcs XX81&@# $81 $939 $935 $87 $781 $99 $89 $91 $ pcs XX88&@# $71 $985 $9899 $8 $81 $1,17 $87 $9 $1, pcs XX8&@# $7559 $993 $1,3 $99 $813 $1,911 $919 $1,5 $1,911 DESIGNER WHITE KRYSTALCAST KRYSTALCAST SOLID SURFACE **QUARTZ ON MDF ON PLY (WILSONART) (CAMBRIA) STATEMENT LAMINATE TOP W/ BIRCH PLY EDGE STATEMENT VENEER TOP W/ BIRCH PLY EDGE KNIFE EDGE BRACES INCLD. Part Number Suffix 5-1/8" FLAT EDGE -1/8" FLAT EDGE For other color options, see page % +19% +5% *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: (n/a on Statement Ply) G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1% BRACES INCLD. Part Number KNIFE EDGE Suffix B KNIFE EDGE Suffix D 8 7 XX87&@ $79 $ XX88&@ $895 $ XX89&@ $918 $1, pcs XX818&@ $11,79 $13, pcs XX81&@ $1,5 $1, pcs XX813&@ $13,51 $15, pcs XX81&@ $1,33 $1, pcs XX815&@ $15,3 $17, pcs XX818&@ $1,17 $19, pcs XX818&@ $1,993 $, pcs XX819&@ $18,9 $1, pcs XX8&@ $,8 $, pcs XX81&@ $1,35 $5, pcs XX88&@ $,77 $,8 8 3 pcs XX8&@ $3,5 $7,77 FLAT PLY EDGE Suffix -1/8 FLAT EDGE Suffix M 1 1/ KNIFE EDGE FLAT EDGE Suffix N Suffix J Suffix Y 1-1/"KNIFE EDGE Suffix 3 Suffix Z 1-1/"KNIFE EDGE Suffix 8 7 XX87&@# $817 $933 $788 $7199 $1,5 $31 $381 $381 $ XX88&@# $95 $1,87 $9 $899 $1,3 $3799 $ $5 $7 8 9 XX89&@# $11, $1,513 $1,3 $91 $1,58 $188 $ $71 $ pcs XX818&@# $13,8 $15,33 $11,3 $1,51 $15,81 $935 $55 $5535 $ pcs XX81&@# $1,991 $1,85 $1,53 $11,1 $17,57 $531 $588 $5988 $ pcs XX813&@# $1,95 $18,3 $13,8 $1,71 $19,33 $57 $38 $51 $7 8 1 pcs XX81&@# $17, $19,838 $1,8 $13,83 $1,89 $9 $73 $891 $ pcs XX815&@# $18,95 $1,38 $1,3 $1,93 $,8 $81 $711 $735 $ pcs XX818&@# $,11 $,8 $17,1 $1,3 $,3 $88 $758 $7797 $ pcs XX818&@# $1,51 $,31 $18,35 $17,1 $,31 $755 $81 $89 $ pcs XX819&@# $,8 $5,83 $19,85 $18, $8,119 $7 $839 $871 $ pcs XX8&@# $5,78 $8,87 $, $19,3 $9,877 $81 $9351 $959 $1, pcs XX81&@# $,983 $3,339 $1,85 $,7 $31,33 $877 $95 $997 $1, pcs XX88&@# $8,89 $31,89 $,95 $1,58 $33,391 $911 $1,79 $1, $11,3 8 3 pcs XX8&@# $9,59 $33,3 $,15 $,8 $35,18 $955 $1,57 $1,877 $11,83 TABLES -

15 7 Conference Table Tops (5 D) (XX) Top Shape Prefix List: D STEP (SF) Rounded (CR) Rectangle Rectangle (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look K Standard Laminate Knife Edge T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge F Standard Laminate Taper Wood Edge G Standard Laminate Knife Wood Edge H Standard Laminate Bullnose Wood Edge P Standard Veneer 3mm Wood Edge Q Standard Veneer Taper Wood Edge R Standard Veneer Knife w/ 3mm Wood Edge U Standard Veneer Bullnose Wood Edge V Standard Veneer Ultra Wood Edge B Back-Painted Glass on 1-1/8" Knife Edge MDF D Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDF 5 KrystalCast on MDF - Knife Edge KrystalCast on Ply - Flat Ply Edge M Designer White Solid Surface (Wilsonart) - 1/8 Flat Edge N Designer White Solid Surface (Wilsonart) - 1-1/" Knife Edge J **Quartz (Cambria) on MDF - 3mm Edge Y Statement Laminate Top - 1/8 Flat Ply Edge 3 Statement Laminate Top - Knife Ply Edge Z Statement Veneer Top - 1/8 Flat Ply Edge Statement Veneer Top - Knife Ply Edge **3% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details. STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Pwr/Data Cut-out, Centered (all size tops) +$3 C Two Pwr/Data Cut-outs, Between Bases (-pc tops) +$7 D Two Pwr/Data Cut-outs, Between Outer Bases (3-pc tops) +$7 E Three Pwr/Data Cut-outs, Between Bases (3-pc tops) +$18 F Foundation Trough Door Kit Cut Out (n/a Designer Finishes) +$99 X Other TBD STEP - Laminate, Veneer, and Statement Ply Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. (BT) Boat (CA) Racetrack (Capsule) (EL) Ellipse Tip: Ellipse tops only available up to 1 W. D (WC) Wedge Tip: Wedge tops available 7- W. > Edge profile is the same on all sides. > D is 1" less than on Boat tops. > For wedge tops, 7-9 W D is 1 less than ; W D is 18 less than ; - W D is less than. > Multi-piece tops come with alignment hardware. > See page 31 for Designer Finish specifications. > Laminate knife wood edge (G) is 1.9 wide. Veneer knife wood edge (R) is.1 wide (3mm). > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE STANDARD LAMINATE WOOD EDGE PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES INCLD. Part Number Suffix A Suffix L Suffix K Suffix T BRACES INCLD. Part Number 3MM TAPER KNIFE BULLNOSE 3MM WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE Designer Finishes DESIGNER WHITE KRYSTALCAST KRYSTALCAST SOLID SURFACE **QUARTZ ON MDF ON PLY (WILSONART) (CAMBRIA) STATEMENT LAMINATE TOP W/ BIRCH PLY EDGE STATEMENT VENEER TOP W/ BIRCH PLY EDGE KNIFE EDGE BRACES INCLD. Part Number Suffix 5-1/8" FLAT EDGE -1/8" FLAT EDGE 5 5 XX55&@# $778 $89 $111 n/a 5 7 XX57&@# $88 $118 $1151 n/a 5 8 XX58&@# $188 $151 $11 n/a 5 9 XX59&@# $188 $151 $11 n/a 5 18 pcs XX518&@# $159 $1781 $13 n/a 5 1 pcs XX51&@# $1577 $1813 $5 n/a 5 13 pcs XX513&@# $1738 $1998 $59 n/a 5 1 pcs XX51&@# $179 $5 $33 n/a 5 15 pcs XX515&@# $71 $381 $9 n/a 5 18 pcs XX518&@# $1 $ $758 n/a 5 18 pcs XX518&@# $31 $58 $35 n/a 5 19 pcs XX519&@# $3 $8 $31 n/a 5 3pcs XX5&@# $85 $38 $371 n/a 5 1 3pcs XX51&@# $83 $39 $371 n/a 5 8 3pcs XX58&@# $395 $19 $53 n/a 5 3pcs XX5&@# $35 $9 $555 n/a WHITE WHITE BACK-PAINTED BACK-PAINTED GLASS (FROSTED) GLASS ON MDF ON MDF STANDARD VENEER TAPER WOOD EDGE KNIFE w/ 3MM BULLNOSE ULTRA WOOD EDGE WOOD EDGE WOOD EDGE Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V 5 5 XX55&@# $717 $353 $3591 $3153 $318 $131 $3333 $3783 $ XX57&@# $358 $391 $ $357 $3577 $8 $379 $55 $8 5 8 XX58&@# $3397 $379 $89 $39 $3975 $515 $1 $73 $ XX59&@# $3397 $379 $89 $39 $3975 $515 $1 $73 $ pcs XX518&@# $38 $55 $5571 $939 $537 $11 $535 $59 $ pcs XX51&@# $31 $58 $557 $9 $51 $15 $538 $599 $ pcs XX513&@# $9 $593 $37 $53 $59 $95 $58 $18 $ pcs XX51&@# $58 $355 $97 $578 $59 $79 $3 $9 $ pcs XX515&@# $58 $88 $959 $ $39 $83 $7 $731 $ pcs XX518&@# $15 $7587 $77 $95 $71 $891 $751 $83 $ pcs XX518&@# $78 $851 $911 $793 $7 $9577 $81 $8873 $ pcs XX519&@# $78 $915 $959 $8 $813 $1,11 $89 $9 $1,11 5 3pcs XX5&@# $7819 $9995 $1,39 $95 $8937 $11,5 $918 $1,9 $11, pcs XX51&@# $81 $1,97 $1,91 $99 $9 $11,5 $989 $1,795 $11, pcs XX58&@# $83 $11,35 $11,9 $1,17 $991 $1,1 $1,8 $11,33 $1,1 5 3pcs XX5&@# $97 $11,538 $11,988 $1,39 $1,381 $1,773 $1,885 $11,89 $1,773 For other color options, see page 31. BRACES INCLD. Part Number +1% +19% +5% *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: (n/a on Statement Ply) G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) KNIFE EDGE Suffix B KNIFE EDGE Suffix D 5 5 XX55&@ $1,7 $1, XX57&@ $11,58 $13, XX58&@ $11,58 $13, XX59&@ $11,58 $13, pcs XX518&@ $13,3 $15,7 5 1 pcs XX51&@ $1,11 $17, pcs XX513&@ $1,19 $19, pcs XX51&@ $17,97 $, pcs* XX515&@ $18,97 $, pcs* XX518&@ $,83 $3, pcs* XX518&@ $1,188 $5, pcs* XX519&@ $,95 $,59 5 3pcs XX5&@ $5,15 $9, 5 1 3pcs XX51&@ $,31 $3, pcs* XX58&@ $7,338 $3,31 5 3pcs* XX5&@ $8, $33,713 *Number of top pieces may vary when back-painted glass is chosen. See page 31 for details. +1% FLAT PLY EDGE Suffix -1/8 FLAT EDGE Suffix M 1 1/ KNIFE EDGE FLAT EDGE Suffix N Suffix J Suffix Y 1-1/"KNIFE EDGE Suffix 3 Suffix Z 1-1/"KNIFE EDGE Suffix 5 5 XX55&@# $11, $1,551 $7139 $538 $1,787 $3915 $33 $ $ XX57&@# $1, $1,1 $838 $771 $1,95 $ $87 $998 $ XX58&@# $13,85 $15,9 $9598 $8891 $15,1 $895 $513 $555 $7 5 9 XX59&@# $13,85 $15,9 $1,315 $11,53 $17,57 $895 $513 $555 $ pcs XX518&@# $1,1 $18,719 $13,713 $1,79 $19,771 $5713 $5 $ $ pcs XX51&@# $18,5 $,583 $15,111 $1,13 $1,97 $197 $79 $75 $ pcs XX513&@# $19,88 $,8 $1,51 $15,8 $,1 $ $733 $757 $ pcs XX51&@# $1,51 $,31 $17,98 $1,88 $,31 $713 $788 $81 $ pcs XX515&@# $3,1 $,17 $19,3 $18,1 $8,558 $7597 $8315 $87 $ pcs XX518&@# $,778 $8, $,7 $19,85 $3,75 $83 $88 $9 $ pcs XX518&@# $,9 $9,9 $,13 $,83 $3,95 $8531 $938 $979 $1, pcs XX519&@# $8, $31,79 $3,51 $,1 $35,18 $8998 $9835 $1,318 $11, pcs XX5&@# $31, $35,18 $,899 $3,51 $37,35 $9833 $1,711 $11, $1, pcs XX51&@# $3,85 $37,51 $,958 $,8 $39,5 $1,3 $11,18 $11,788 $1, pcs XX58&@# $3,87 $38,91 $7,95 $,178 $1,739 $1,7 $11,7 $1,338 $13,9 5 3pcs XX5&@# $3,953 $,778 $9,93 $7,517 $3,935 $11,3 $1,31 $1,887 $13,88 TABLES -

16 9 Conference Table Tops ( D) (XX) Top Shape Prefix List: D STEP (SF) Rounded (CR) Rectangle Rectangle (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look K Standard Laminate Knife Edge T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge F Standard Laminate Taper Wood Edge G Standard Laminate Knife Wood Edge H Standard Laminate Bullnose Wood Edge P Standard Veneer 3mm Wood Edge Q Standard Veneer Taper Wood Edge R Standard Veneer Knife w/ 3mm Wood Edge U Standard Veneer Bullnose Wood Edge V Standard Veneer Ultra Wood Edge B Back-Painted Glass on 1-1/8" Knife Edge MDF D Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDF 5 KrystalCast on MDF - Knife Edge KrystalCast on Ply - Flat Ply Edge M Designer White Solid Surface (Wilsonart) - 1/8 Flat Edge N Designer White Solid Surface (Wilsonart) - 1-1/" Knife Edge J **Quartz (Cambria) on MDF - 3mm Edge Y Statement Laminate Top - 1/8 Flat Ply Edge 3 Statement Laminate Top - Knife Ply Edge Z Statement Veneer Top - 1/8 Flat Ply Edge Statement Veneer Top - Knife Ply Edge **3% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details. STEP 3 (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Pwr/Data Cut-out, Centered (all size tops) +$3 C Two Pwr/Data Cut-outs, Between Bases (-pc tops) +$7 D Two Pwr/Data Cut-outs, Between Outer Bases (3-pc tops) +$7 E Three Pwr/Data Cut-outs, Between Bases (3-pc tops) +$18 F Foundation Trough Door Kit Cut Out (n/a Designer Finishes) +$99 X Other TBD STEP - Laminate, Veneer, and Statement Ply Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. (BT) Boat (CA) Racetrack (Capsule) D (EL) Ellipse Tip: Ellipse tops only available up to 1 W. (WC) Wedge Tip: Wedge tops available 7- W. > Edge profile is the same on all sides. > D is 1" less than on Boat tops. > For wedge tops, 7-9 W D is 1 less than ; W D is 18 less than ; - W D is less than. > Multi-piece tops come with alignment hardware. > See page 31 for Designer Finish specifications. > Laminate knife wood edge (G) is 1.9 wide. Veneer knife wood edge (R) is.1 wide (3mm). > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > Tops for Grid, XTB, and freestanding height-adjustable table bases can be found on pages > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE STANDARD LAMINATE WOOD EDGE PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES INCLD. Part Number Suffix A Suffix L Suffix K Suffix T BRACES INCLD. Part Number 3MM TAPER KNIFE BULLNOSE 3MM WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE Designer Finishes DESIGNER WHITE KRYSTALCAST KRYSTALCAST SOLID SURFACE **QUARTZ ON MDF ON PLY (WILSONART) (CAMBRIA) STATEMENT LAMINATE TOP W/ BIRCH PLY EDGE STATEMENT VENEER TOP W/ BIRCH PLY EDGE KNIFE EDGE BRACES INCLD. Part Number Suffix 5-1/8" FLAT EDGE -1/8" FLAT EDGE XX&@# $778 $89 $111 n/a 7 XX7&@# $88 $118 $1151 n/a 8 XX8&@# $188 $151 $11 n/a 9 XX9&@# $188 $151 $11 n/a 18 pcs XX18&@# $159 $1781 $13 n/a 1 pcs XX1&@# $1577 $1813 $5 n/a 13 pcs XX13&@# $1738 $1998 $59 n/a 1 pcs XX1&@# $179 $5 $33 n/a 15 pcs XX15&@# $71 $381 $9 n/a 18 pcs XX18&@# $1 $ $758 n/a 18 pcs XX18&@# $31 $58 $35 n/a 19 pcs XX19&@# $3 $8 $31 n/a 3 pcs XX&@# $85 $38 $371 n/a 1 3 pcs XX1&@# $83 $39 $371 n/a 8 3 pcs XX8&@# $395 $19 $53 n/a 3 pcs XX&@# $35 $9 $555 n/a WHITE WHITE BACK-PAINTED BACK-PAINTED GLASS (FROSTED) GLASS ON MDF ON MDF STANDARD VENEER TAPER WOOD EDGE KNIFE w/ 3MM BULLNOSE ULTRA WOOD EDGE WOOD EDGE WOOD EDGE Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q Suffix R Suffix U Suffix V XX&@# $717 $353 $3591 $3153 $318 $131 $3333 $3783 $131 7 XX7&@# $358 $391 $ $357 $3577 $8 $379 $55 $8 8 XX8&@# $3397 $379 $89 $39 $3975 $515 $1 $73 $515 9 XX9&@# $3397 $379 $89 $39 $3975 $515 $1 $73 $ pcs XX18&@# $38 $55 $5571 $939 $537 $11 $535 $59 $11 1 pcs XX1&@# $31 $58 $557 $9 $51 $15 $538 $599 $15 13 pcs XX13&@# $9 $593 $37 $53 $59 $95 $58 $18 $95 1 pcs XX1&@# $58 $355 $97 $578 $59 $79 $3 $9 $79 15 pcs XX15&@# $58 $88 $959 $ $39 $83 $7 $731 $83 18 pcs XX18&@# $15 $7587 $77 $95 $71 $891 $751 $83 $ pcs XX18&@# $78 $851 $911 $793 $7 $9577 $81 $8873 $ pcs XX19&@# $78 $915 $959 $8 $813 $1,11 $89 $9 $1,11 3 pcs XX&@# $7819 $9995 $1,39 $95 $8937 $11,5 $918 $1,9 $11,5 1 3 pcs XX1&@# $81 $1,97 $1,91 $99 $9 $11,5 $989 $1,795 $11,5 8 3 pcs XX8&@# $83 $11,35 $11,9 $1,17 $991 $1,1 $1,8 $11,33 $1,1 3 pcs XX&@# $97 $11,538 $11,988 $1,39 $1,381 $1,773 $1,885 $11,89 $1,773 For other color options, see page % +19% +5% *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: (n/a on Statement Ply) G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) BRACES INCLD. Part Number KNIFE EDGE KNIFE EDGE XX&@ 7 XX7&@ 8 XX8&@ 9 XX9&@ 18 pcs XX18&@ 1 pcs XX1&@ 13 pcs XX13&@ 1 pcs XX1&@ 15 pcs* XX15&@ 18 pcs* XX18&@ 18 pcs* XX18&@ 19 pcs* XX19&@ 3 pcs XX&@ 1 3 pcs XX1&@ 8 3 pcs* XX8&@ 3 pcs* XX&@ $1,7 $11,58 $11,58 $11,58 $1,33 $13,93 $13,93 $13,93 $13,3 $1,11 $1,19 $17,97 $18,97 $,83 $1,188 $,95 $15,7 $17,5 $19,87 $,57 $,398 $3,79 $5,139 $,59 $5,15 $,31 $7,338 $8, $9, $3,971 $3,31 $33,713 Suffix B Suffix D *Number of top pieces may vary when back-painted glass is chosen. See page 31 for details. +1% FLAT PLY EDGE Suffix -1/8 FLAT EDGE Suffix M 1 1/ KNIFE EDGE FLAT EDGE Suffix N Suffix J Suffix Y 1-1/"KNIFE EDGE Suffix 3 Suffix Z 1-1/"KNIFE EDGE Suffix XX&@# $11, $1,551 $7139 $538 $1,787 $3915 $33 $ $858 7 XX7&@# $1, $1,1 $838 $771 $1,95 $ $87 $998 $55 8 XX8&@# $13,85 $15,9 $9598 $8891 $15,1 $895 $513 $555 $7 9 XX9&@# $13,85 $15,9 $1,315 $11,53 $17,57 $895 $513 $555 $7 18 pcs XX18&@# $1,1 $18,719 $13,713 $1,79 $19,771 $5713 $5 $ $713 1 pcs XX1&@# $18,5 $,583 $15,111 $1,13 $1,97 $197 $79 $75 $7 13 pcs XX13&@# $19,88 $,8 $1,51 $15,8 $,1 $ $733 $757 $81 1 pcs XX1&@# $1,51 $,31 $17,98 $1,88 $,31 $713 $788 $81 $88 15 pcs XX15&@# $3,1 $,17 $19,3 $18,1 $8,558 $7597 $8315 $87 $ pcs XX18&@# $,778 $8, $,7 $19,85 $3,75 $83 $88 $9 $ pcs XX18&@# $,9 $9,9 $,13 $,83 $3,95 $8531 $938 $979 $1,5 19 pcs XX19&@# $8, $31,79 $3,51 $,1 $35,18 $8998 $9835 $1,318 $11,153 3 pcs XX&@# $31, $35,18 $,899 $3,51 $37,35 $9833 $1,711 $11, $1, pcs XX1&@# $3,85 $37,51 $,958 $,8 $39,5 $1,3 $11,18 $11,788 $1, pcs XX8&@# $3,87 $38,91 $7,95 $,178 $1,739 $1,7 $11,7 $1,338 $13,9 3 pcs XX&@# $3,953 $,778 $9,93 $7,517 $3,935 $11,3 $1,31 $1,887 $13,88 TABLES - 8

17 51 Round Table Tops > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. See below for quantities. (Stealth, Concurrence, and Foundation Trough Kit bases do not need braces). Maximum span between legs is 7". > A freight fee of $1 net is assessed on orders less than $1 net. See page Laminate & Veneer **3% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details. STEP (@) Cable Management Suffix List: N No Cable Management G Grommet (one, center) K One Pwr/Data Cut-out, Centered X Other > Multi-piece tops come with alignment hardware. > See page 31 for Designer Finish specifications. > Laminate knife wood edge (G) is 1.9 wide. Veneer knife wood edge (R) is.1 wide (3mm). (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look K Standard Laminate Knife Edge T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge F Standard Laminate Taper Wood Edge G Standard Laminate Knife Wood Edge H Standard Laminate Bullnose Wood Edge P Standard Veneer 3mm Wood Edge Q Standard Veneer Taper Wood Edge R Standard Veneer Knife w/ 3mm Wood Edge U Standard Veneer Bullnose Wood Edge V Standard Veneer Ultra Wood Edge B Back-Painted Glass on 1-1/8" Knife Edge MDF D Back-Painted Glass (frosted) on 1-1/8" Knife Edge MDF 5 KrystalCast on MDF - Knife Edge KrystalCast on Ply - Flat Ply Edge 7 KrystalCast Solid - 1 Flat Edge M Designer White Solid Surface (Wilsonart) - 1/8 Flat Edge N Designer White Solid Surface (Wilsonart) - 1-1/" Knife Edge J **Quartz (Cambria) on MDF - 3mm Edge Y Statement Laminate Top - 1/8 Flat Ply Edge 3 Statement Laminate Top - Knife Ply Edge Z Statement Veneer Top - 1/8 Flat Ply Edge Statement Veneer Top - Knife Ply Edge No charge +$18 +$3 TBD STANDARD LAMINATE WOOD EDGE PVC PLY 3MM EDGE EDGE KNIFE EDGE TAPER EDGE BRACES INCLD. Part Number Suffix A Suffix L Suffix K Suffix T BRACES INCLD. Part Number 3MM TAPER KNIFE BULLNOSE 3MM WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE WOOD EDGE pcs pcs pcs R&@# R3&@# R3&@# R&@# R8&@# R5&@# R&@# R&@# R7&@# R8&@# STANDARD LAMINATE $18 $9 $35 $31 $91 $ $ $1338 $1338 $1783 TABLES - 5 $5 $39 $ $95 $5 $738 $738 $1538 $1538 $5 CONTOUR LAMINATE $83 $39 $55 $5 $38 $83 $83 $1739 $1739 $317 $89 $358 $75 $57 $7 n/a n/a n/a n/a n/a pcs pcs pcs R&@# R3&@# R3&@# R&@# R8&@# R5&@# R&@# R&@# R7&@# R8&@# STANDARD VENEER TAPER WOOD EDGE Suffix E Suffix F Suffix G Suffix H Suffix P Suffix Q $399 $585 $799 $19 $1333 $151 $1997 $39 $35 n/a $37 $88 $1153 $1 $18 $179 $58 $391 $71 n/a $3 $915 $1193 $157 $1855 $38 $ $95 $38 n/a $53 $75 $997 $178 $159 $19 $31 $33 $13 n/a $3 $78 $98 $19 $155 $19 $357 $3337 $385 n/a $78 $139 $133 $177 $135 $583 $33 $158 $7 n/a KNIFE w/ 3MM BULLNOSE WOOD EDGE WOOD EDGE Suffix R Suffix U $585 $88 $17 $138 $179 $9 $59 $31 $19 n/a $ $97 $15 $155 $19 $38 $83 $3855 $3 n/a ULTRA WOOD EDGE Suffix V $78 $139 $133 $177 $135 $583 $33 $158 $7 n/a STEP 3 - Laminate, Veneer, and Statement Ply Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. Designer Finishes KRYSTALCAST ON MDF ON PLY 1" THICK DESIGNER WHITE SOLID SURFACE **QUARTZ (WILSONART) (CAMBRIA) STATEMENT LAMINATE TOP W/ BIRCH PLY EDGE STATEMENT VENEER TOP W/ BIRCH PLY EDGE -1/8 FLAT EDGE 1 1/ KNIFE EDGE Suffix N Suffix J -1/8" FLAT EDGE Suffix Y Suffix 3-1/8" FLAT EDGE Suffix Z Suffix $157 $31 $33 $395 $99 $157 $73 $8835 $1,1 $13,73 $1757 $7 $395 $5381 $79 $8897 $1,983 $13,91 $1,5 $1,58 $1357 $1593 $18 $18 $53 $99 $331 $1 $719 $587 $171 $199 $337 $73 $31 $333 $1 $558 $553 $9 $1 $17 $19 $385 $8 $35 $3775 $78 $533 $9 $17 $99 $88 $93 $38 $397 $553 $557 $57 $7775 For other color options, see page % +19% +5% *Add $35 list fee for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: (n/a on Statement Ply) G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) WHITE WHITE BACK-PAINTED BACK-PAINTED GLASS (FROSTED) GLASS ON MDF ON MDF +1% BRACES INCLD. Part Number KNIFE EDGE KNIFE EDGE Suffix D KNIFE EDGE BRACES INCLD. Part Number Suffix 5 Suffix Suffix 7 Suffix M - $133 $7 $87 $3859 $85 $151 $755 $9773 $11,5 $1,18 $157 $31 $3 $397 $5555 $738 $88 $11,11 $1,35 $1,31 - $191 $33 $3355 $57 $595 $8131 $99 $13,5 $15,17 $,1 $173 $1 $3 $838 $3 $87 $1,7 $13,59 $15,71 $,5 $187 $17 $379 $ $55 $781 $811 $9579 $11,7 $1, pcs pcs pcs R&@ R3&@ R3&@ R&@ R8&@ R5&@ R&@ R&@ R7&@ R8&@ Suffix B pcs pcs pcs R&@# R3&@# R3&@# R&@# R8&@# R5&@# R&@# R&@# R7&@# R8&@# $135 $ $935 $3999 $519 $719 $8739 $11, $13,91 $17,733 FLAT PLY EDGE 1" FLAT FLAT EDGE 1-1/"KNIFE EDGE 1-1/"KNIFE EDGE

18 5 53 Half-Round, Half-Elliptical, Half-Media Conference Table Tops (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge L Standard Laminate PVC Edge w/ Ply look K Standard Laminate Knife Edge* T Contour Laminate Taper Edge* E Standard Laminate 3mm Wood Edge P Standard Veneer 3mm Wood Edge * Half Media and Half Eliptical is always a flat edge. Half Round is always a flat edge. STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +19% MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White > For Half-Round tops used in flip applications, downsize the base one size (e.g. "x8" Half-Round would use an 18"D base). > Half Media and Half Eliptical is always a flat edge. Half Round is always a flat edge. > Braces not included. Add braces for spans of 5 or longer according to rules on page 3. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer Half Media Half Eliptical STANDARD LAMINATE CONTOUR STANDARD STANDARD LAMINATE LAMINATE VENEER PVC PLY 3MM 3MM BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE WOOD EDGE WOOD EDGE INCLD. Part Number Suffix A Suffix L Suffix K Suffix T Suffix E Suffix P Half-Round 8 - HR8&# $35 $373 $ $ $717 $ HR3&# $ $535 $5 $37 $13 $ HR37&# $ $737 $89 $17 $19 $15 Half-Elliptical HRE8&# $511 $587 $ $183 $17 $15 - HRE&# $77 $778 $88 n/a $1995 $35 Half-Media HRM8&# $511 $587 $ $183 $17 $15 - HRM&# $77 $778 $88 n/a $1995 $35 Half Round Notes TABLES - (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee)

19 5 55 D-Top Table Tops (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge (all sides) L Standard Laminate PVC Edge w/ Ply look (all sides) K Standard Laminate Knife Edge T Contour Laminate Taper Edge STEP (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Power/Data Cut-out, Centered +$3 C Two Power/Data Cut-outs +$7 X Other TBD > For applications which require Taper Edge to be handed, call customer service for quote. > This worksurface is not available for XTB Flexible Height Benching. > is always 3mm edge. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. D-Top Arc D-Top TABLES - STEP 3 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +19% MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White Laminate STANDARD LAMINATE CONTOUR LAMINATE BRACES 3MM EDGE PVC PLY EDGE KNIFE EDGE TAPER EDGE INCLD. Part Number Suffix A Suffix L Suffix K Suffix T D-Top 8 - P8&@# $3 $38 $1 $7 1 P&@# $383 $ $97 $515 1 P&@# $1 $1 $51 $ P7&@# $1 $78 $5 $ P38&@# $5 $5 $59 $ 3 1 P3&@# $91 $5 $38 $7 3 1 P3&@# $5 $ $78 $ P37&@# $5 $1 $7 $ P38&@# $73 $773 $87 $ P39&@# $71 $8 $937 $ P3&@# $71 $8 $911 $ P3&@# $771 $88 $1 $ P37&@# $771 $88 $1 $ P378&@# $931 $17 $11 $ P38&@# $931 $17 $11 $ P39&@# $931 $17 $11 $15 1 P&@# $755 $88 $981 $197 1 P&@# $83 $95 $181 $183 7 P7&@# $83 $95 $181 $ P78&@# $93 $18 $15 $115 8 P8&@# $93 $18 $15 $5 9 P9&@# $998 $117 $197 $ P8&@# $755 $88 $981 $ P8&@# $83 $95 $181 $1 8 7 P87&@# $83 $95 $181 $ P878&@# $93 $18 $15 $ P88&@# $93 $18 $15 $ P89&@# $998 $117 $197 $ P5&@# $88 $118 $1151 n/a 5 1 P5&@# $88 $118 $1151 n/a 5 7 P57&@# $88 $118 $1151 n/a 5 78 P578&@# $188 $151 $11 n/a 5 8 P58&@# $188 $151 $11 n/a 5 9 P59&@# $188 $151 $11 n/a 1 P&@# $778 $89 $111 n/a 1 P&@# $88 $118 $1151 n/a 7 P7&@# $88 $118 $1151 n/a 78 P78&@# $188 $151 $11 n/a 8 P8&@# $188 $151 $11 n/a 9 P9&@# $188 $151 $11 n/a Laminate STANDARD LAMINATE CONTOUR LAMINATE BRACES 3MM EDGE PVC PLY EDGE KNIFE EDGE TAPER EDGE INCLD. Part Number Suffix A Suffix L Suffix K Suffix T Arc D-Top 3 1 PAB3&@# $91 $5 $38 $7 3 1 PAB3&@# $5 $ $78 $ PAB37&@# $5 $1 $7 $ PAB38&@# $73 $73 $87 $ PAB39&@# $71 $71 $937 $ PAB37&@# $771 $88 $1 $ PAB38&@# $931 $17 $11 $ PAB39&@# $931 $17 $11 n/a

20 5 57 Conference Quarter-Round Table Tops (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge (all sides) L Standard Laminate PVC Edge w/ Ply look (all sides) K Standard Laminate Knife Edge T Contour Laminate Taper Edge E Standard Laminate 3mm Wood Edge (all sides) P Standard Veneer 3mm Wood Edge (all sides) STEP (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Power/Data Cut-out, Centered +$3 X Other TBD > Support recommendation is 3 straight legs. > is always a 3mm edge. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer STANDARD LAMINATE CONTOUR LAMINATE STANDARD LAMINATE STANDARD VENEER Tip: Order conference rectangle worksurfaces on pages 3-37 for this application. TABLES - STEP 3 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +19% MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) PVC PLY BRACES 3MM EDGE EDGE KNIFE EDGE TAPER EDGE INCLD. Part Number Suffix A Suffix L Suffix K Suffix T - - QR&@# $9 $3 $97 $ QR33&@# $89 $33 $375 $389 3MM 3MM BRACES WOOD EDGE WOOD EDGE INCLD. Part Number Suffix E Suffix P - - QR&@# $359 $ QR33&@# $531 $3

21 58 59 Teleconference Table Tops (&) Finish and Edge Suffix List: A Standard Laminate 3mm Edge (all sides) L Standard Laminate PVC Edge w/ Ply look (all sides) E Standard Laminate 3mm Wood Edge (all sides) P Standard Veneer 3mm Wood Edge (all sides) STEP (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Power/Data Cut-out, Centered +$3 X Other TBD STEP 3 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +19% MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Contour Laminate Suffix List: G Natural Maple R Hayward Cherry S Studio White Matrix V River Cherry W Designer White (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > " Teleconference Tops: D = ". > 3" Teleconference Tops: D = 3". > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Veneer D Tip: Leg orientation (legs purchased separately) STANDARD LAMINATE Tip: Order conference rectangle worksurfaces on pages 3-37 for this application. STANDARD VENEER PVC PLY 3MM BRACES 3MM EDGE EDGE WOOD EDGE WOOD EDGE INCLD. Part Number Suffix A Suffix L Suffix E Suffix P ST7&@# $79 $55 $11 $ ST337&@# $571 $5 $13 $17 Notes TABLES -

22 1 Credenza and File Tops (&) Finish and Edge Suffix List: A Standard Laminate - 3mm Edge B Back-Painted Glass D Back-Painted Glass (frosted) KrystalCast on Ply - Flat Ply Edge M Designer White Solid Surface (Wilsonart) - 1 Flat Edge J **Quartz (Cambria) on MDF - 3mm Edge Y Statement Laminate Top - 1 Flat Ply Edge Z Statement Veneer Top - 1 Flat Ply Edge **3% Upcharge for Luxury Cambria Quartz Colors. See page 31 for details. STEP (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Power/Data Cut-out, Centered (all size tops) +$3 X Other TBD > (see page 1) > BRACES ARE INCLUDED WITH TABLE IF REQUIRED. > There is a 3% upcharge for Luxury Cambria Quartz colors: Annica, Brittanicca, Clareanne, Ella, Oakmoor, Queen Anne, Roxwell, and Whitecliff. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate & Designer Finishes (CD) Credenza Top STANDARD WHITE WHITE BACK-PAINTED LAMINATE BACK-PAINTED GLASS (FROSTED) GLASS For other color options, see page 31. > -1/8 thick Designer Finish options become 1 thick on Credenza Tops. > MDF substraight for glass tops not needed (and therefore not included) with Credenza Tops. > Back-Painted Glass 3/8 thick, annealed, flat-polished low iron. Bright white as standard. Any Benjamin Moore color available upon request. $ list custom color fee applies for orders of less than 5 sq. ft. There is also a % upcharge to each top's list price for custom colors. Actual depth of D tops is 59 due to yield. > KrystalCast Acrylic on MDF or birch ply is available in any Benjamin Moore color. Super White is by far the most popular. See for technical specs and care instructions. > Solid Surface (Wilsonart) Designer White as standard. See for additional finish/color choices. Price varies by finish/color, contact designteam@enwork.com with your preferred selection. > Quartz (Cambria) See for finish/color choices. 13/1" thick. Undersized 1-1/8" knife edge substrate painted black. Due to sheet size availability, "D (only) tops come in twice the quantity of pieces. (For example, a top that normally comes in 3 pieces will come in pieces. > Birch Ply Edges Edge is clear coated when specified with laminate and stained-to-match when sold with veneer. Actual width of 9"W is 95". Actual width of 19"W is 19" due to yield. KRYSTALCAST DESIGNER WHITE STATEMENT STATEMENT ON PLY SOLID SURFACE QUARTZ LAMINATE TOP W/ VENEER TOP W/ (WILSONART) (CAMBRIA) BIRCH PLY EDGE BIRCH PLY EDGE TABLES - STEP 3 - For Statement Ply Tops Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +19% MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. 3MM EDGE FLAT EDGE FLAT EDGE Part Number Suffix A Suffix B Suffix D Credenza Tops* ** - C351&@ $199 $153 $1 3 - CD3&@ $1 $15 $1 8 - CD8&@ $83 $13 $ CD&@ $ $39 $ CD7&@ $5 $51 $85 - CD&@ $ $51 $ CD7&@ $5 $89 $ CD8&@ $575 $311 $ CD9&@ $ $311 $33 **Tip: Used on Concurrence Monitor Wall. *Tip: MDF substraight for glass tops not needed (and therefore not included) with Credenza Tops. FLAT PLY 1 FLAT FLAT 1 FLAT 1" FLAT EDGE EDGE EDGE EDGE* EDGE* Part Number Suffix Suffix M Suffix J Suffix Y Suffix Z Credenza Tops* ** - C351&@# $183 $193 $1988 $3 $ CD3&@# $183 $5 $19 $9 $ CD8&@# $9 $855 $98 $81 $95 - CD&@# $31 $359 $3 $997 $ CD7&@# $378 $5 $393 $118 $ CD&@# $378 $397 $393 $1173 $ CD7&@# $7 $11 $571 $139 $1 8 - CD8&@# $73 $99 $597 $1811 $ CD9&@# $73 $99 $597 $1811 $53 **Tip: Used on Concurrence Monitor Wall. *Tip: MDF substraight for glass tops not needed (and therefore not included) with Credenza Tops. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Wilsonart Kensington Maple laminate) J Cherry (stained similar to Wilsonart Wild Cherry laminate) N Walnut (stained similar to Wilsonart Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee)

23 3 Luminesse LED Rectangle Conference Table Tops Protected by US patent No. 9,1, Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Pwr/Data Cut-out, Centered (all size tops) +$3 C Two Pwr/Data Cut-outs, Between Bases (-pc tops) +$7 D Two Pwr/Data Cut-outs, Between Outer Bases (3-pc tops) +$7 E Three Pwr/Data Cut-outs, Between Bases (3-pc tops) +$18 X Other TBD STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). Orders of 1% 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, MC, SP and 19% NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non-Premium, Formica 5% Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Available as rectangle conference table tops only. > Includes one battery operated remote wall switch. > Currently available as white LED only. Additional colors in development. > amps, depending on top size. > Top is 1.5 thick. LED portion is.5 of the total thickness. > Back-painted glass tops available as a special. Contact designteam@enwork.com. > Each section of top comes fully assembled with its own power supply. Power supply is mounted in the field. > Multi-piece tops have matching seam in light channel. > LED lights are accessible for future maintenance. > Contact designteam@enwork.com if multiple power/data cut-outs are required. > If ordered with Stealth Luminesse LED base, fewer power supplies are required and provided. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. LAMINATE BRACES INCLD. Part Number Suffix CRL7@# $ CRL8@# $ 9 - CRL9@# $ pcs CRL18@# $578 1 pcs CRL1@# $1 13 pcs CRL13@# $51 1 pcs CRL1@# $7 15 pcs CRL15@# $ pcs CRL18@# $ pcs CRL18@# $98 19 pcs CRL19@# $71 LAMINATE BRACES INCLD. Part Number Suffix CRL57@# $ CRL58@# $ CRL59@# $ pcs CRL518@# $7 5 1 pcs CRL51@# $ pcs CRL513@# $7 5 1 pcs CRL51@# $ pcs CRL515@# $ pcs CRL518@# $ pcs CRL518@# $ pcs CRL519@# $719 TABLES - 3pcs CRL@# $ pcs CRL1@# $ pcs CRL8@# $893 3pcs CRL@# $89 5 3pcs CRL5@# $ pcs CRL51@# $ pcs CRL58@# $ pcs CRL5@# $ CRL87@# $ CRL88@# $ CRL89@# $ CRL7@# $5 8 - CRL8@# $ CRL9@# $ pcs CRL818@# $1 8 1 pcs CRL81@# $ pcs CRL813@# $7 8 1 pcs CRL81@# $ pcs CRL815@# $ pcs CRL818@# $ pcs CRL818@# $ pcs CRL819@# $ pcs CRL18@# $5 1 pcs CRL1@# $73 13 pcs CRL13@# $7 1 pcs CRL1@# $77 15 pcs CRL15@# $ pcs CRL18@# $3 18 pcs CRL18@# $ pcs CRL19@# $ pcs CRL8@# $ pcs CRL81@# $ pcs CRL88@# $89 8 3pcs CRL8@# $8983 3pcs CRL@# $ pcs CRL1@# $ pcs CRL8@# $91 3pcs CRL@# $93

24 5 PowerEdge Rectangle Conference Table Tops Patent Pending (^) Paint Suffix List S Silver G Storm R Black T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Available as rectangle conference table tops only. > Top is.75 thick on user edge and 1.5 thick on PowerEdge. > PowerEdge is recessed from front edge of table. > Power Data Units Specified Separately. Quantity varies by size. See chart on page 5. > All tops have one power data unit on each end with 1,, or 3 openings on each side, depending on the size. > -circuit, 15 amp power system. amp available as special and requires hardwire. > Back-painted glass tops available as a special. Contact designteam@enwork.com. > Each section of top comes fully assembled. > Access doors are provided for cable routing. > For Lugano bases, PowerEdge tops only available in 8, 5, and D (not ). > Contact designteam@enwork.com if power/data cut-outs are required. > Not available for use on quartz or solid surface tops. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. STEP LAMINATE - 3MM EDGE A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +$ Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +$8 MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +$3 Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. BRACES INCLD. Part Number List Price (US$) 7 - CRP7^# $9 8 - CRP8^# $ CRP9^# $ pcs CRP18^# $77 1 pcs CRP1^# $75 13 pcs CRP13^# $931 1 pcs CRP1^# $55 15 pcs CRP15^# $ pcs CRP18^# $55 18 pcs CRP18^# $ pcs CRP19^# $58 3pcs CRP^# $7 1 3pcs CRP1^# $ pcs CRP8^# $788 3pcs CRP^# $ CRP87^# $ CRP88^# $ CRP89^# $ pcs CRP818^# $ pcs CRP81^# $ pcs CRP813^# $ pcs CRP81^# $ pcs CRP815^# $ pcs CRP818^# $ pcs CRP818^# $ pcs CRP819^# $58 8 3pcs CRP8^# $ pcs CRP81^# $ pcs CRP88^# $ pcs CRP8^# $813 Base Power-Ins A8BP7 Base Power-In for Hardwire, 7 $18 A8BP1 Base Power-In for Hardwire, 1 $3 A1BP7 Base Power-In for RA Plug Circuit 1 (only), 7 $39 Tip: Use hardwire in feeds if UL listed (not recognized) is required. Tip: Infeeds have a amp plug end which requires a amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek Amp to -Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses. 15 amp Receptacle amp Receptacle LAMINATE - 3MM EDGE BRACES INCLD. Part Number List Price (US$) CRP57^# $ CRP58^# $ CRP59^# $ pcs CRP518^# $ pcs CRP51^# $ pcs CRP513^# $ pcs CRP51^# $ pcs CRP515^# $ pcs CRP518^# $ pcs CRP518^# $ pcs CRP519^# $1 5 3pcs CRP5^# $ pcs CRP51^# $ pcs CRP58^# $ pcs CRP5^# $ CRP7^# $ CRP8^# $ CRP9^# $33 18 pcs CRP18^# $88 1 pcs CRP1^# $51 13 pcs CRP13^# $517 1 pcs CRP1^# $53 15 pcs CRP15^# $ pcs CRP18^# $58 18 pcs CRP18^# $1 19 pcs CRP19^# $1 3pcs CRP^# $71 1 3pcs CRP1^# $77 8 3pcs CRP8^# $831 3pcs CRP^# $888 Part Number Description List Price (US$) PowerEdge Power & Data Units* CRPPW Power Data Unit w/ Power, White $5 CRPUW Power Data Unit w/ 1 Power/ USB, White $385 CRPDW Power Data Unit w/ 1 Power/1 Data Opening, White $3 CRPPG Power Data Unit w/ Power, Grey $5 CRPUG Power Data Unit w/ 1 Power/ USB, Grey $385 CRPDG Power Data Unit w/ 1 Power/1 Data Opening, Grey $3 CRPPR Power Data Unit w/ Power, Black $5 CRPUR Power Data Unit w/ 1 Power/ USB, Black $385 CRPDR Power Data Unit w/ 1 Power/1 Data Opening, Black $3 Tip: All power data units are circuit 1. Circuit units available as a special. Tip: Will not accomodate VGA connections. Tip: When data units are specified, data adapter tree is included. *Number of power units to order by table size: Top Width Power Unit Openings TABLES -

25 7 Apron Tables (Complete Tables) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center rear) +$18 P Two Grommets (one left rear, one right rear) +$3 U Power/Data Cut-out (one, center rear) +$3 K Power/Data Cut-out (one, center of table) +$3 X Other TBD STEP (^) Paint Suffix List S Silver G Storm +$ R Black +$ T Medium Tone +$ W Arctic White +$ Z Other TBD Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP 3 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +$3 (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard +$5 (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$7 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Table is 8 H (5.75 to bottom of the apron). > Includes 3/ top with 3mm edge, apron structure, legs, and fasteners. > Top is shipped pre-assembled with apron. Field assembly requires 1-bolt per leg. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. D Apron Table w/ 3mm Edge MB3@^# D Table, Laminate, 3 W $ MB3@^# D Table, Laminate, 3 W $7 MB@^# D Table, Laminate, W $57 MB8@^# D Table, Laminate, 8 W $511 MB@^# D Table, Laminate, W $558 MB@^# D Table, Laminate, W $5 MB7@^# D Table, Laminate, 7 W $9 3 D Apron Table w/ 3mm Edge MB33@^# 3 D Table, Laminate, 3 W $7 MB33@^# 3 D Table, Laminate, 3 W $51 MB3@^# 3 D Table, Laminate, W $551 MB38@^# 3 D Table, Laminate, 8 W $55 MB3@^# 3 D Table, Laminate, W $1 MB3@^# 3 D Table, Laminate, W $715 MB37@^# 3 D Table, Laminate, 7 W $71 3 D Apron Table w/ 3mm Edge MB3@^# 3 D Table, Laminate, W $885 MB37@^# 3 D Table, Laminate, 7 W $151 D Apron Table w/ 3mm Edge MB@^# D Table, Laminate, W $89 MB7@^# D Table, Laminate, 7 W $13 8 D Apron Table w/ 3mm Edge MB8@^# 8 D Table, Laminate, W $93 MB87@^# 8 D Table, Laminate, 7 W $17 Notes TABLES STEP - APRON

26 8 9 Concurrence - Conference Base Assemblies (3"D - 8"D Top) (@) Segmentation Suffix List: N Non-Segmented Bases No Charge S Segmented Bases +$31 Tip: Laminate or Veneer filler panels can be Non-Segmented or Segmented. Segmented panels have grooves with aluminum trim. Segmented Panel Option > Individual bases are.75 wide. > Base trim is clear anodized aluminum. > Bases include PDGR cable management. > Product is base and aluminum structural beam kit only. Table top and trough covers are specified separately > Trough covers are available to conceal equipment and hide wiring & cabling. See chart on page 71. > Tops are ordered separately. > Concurrence bases ship partially assembled. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. TROUGH COVERS Trough covers are avialable on page 71. TABLES STEP - CONCURRENCE Non-Segmented Panel Option Part Number Description List Price (US$) STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +$ (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (includes $8 58, 3, MC, SP, and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$3 Non-Premium, Formica Premium (WR,, 77,, RD finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time +1% $7 list Stain Match fee) Laminate Concurrence Base and Beam Assemblies for 3 / D Tables LZTLA7@# Lam. Base Assembly for 3 / D x 7 W top $3553 LZTLA8@# Lam. Base Assembly for 3 / D x 8 W top $3775 LZTLA9@# Lam. Base Assembly for 3 / D x 9 W top $3775 LZTLA18@# Lam. Base Assembly for 3 / D x 18 W top $399 LZTLA1@# Lam. Base Assembly for 3 / D x 1 W top $351 LZTLA13@# Lam. Base Assembly for 3 / D x 13 W top $351 LZTLA1@# Lam. Base Assembly for 3 / D x 1 W top $351 LZTLA15@# Lam. Base Assembly for 3 / D x 15 W top $351 LZTLA18@# Lam. Base Assembly for 3 / D x 18 W top $351 LZTLA18@# Lam. Base Assembly for 3 / D x 18 W top $158 LZTLA19@# Lam. Base Assembly for 3 / D x 19 W top $71 LZTLA@# Lam. Base Assembly for 3 / D x W top $71 LZTLA1@# Lam. Base Assembly for 3 / D x 1 W top $71 LZTLA8@# Lam. Base Assembly for 3 / D x 8 W top $71 LZTLA@# Lam. Base Assembly for 3 / D x W top $71 Laminate Concurrence Base and Beam Assemblies for 8 D Tables LZTLB7@# Lam. Base Assembly for 8 D x 7 W top $389 LZTLB8@# Lam. Base Assembly for 8 D x 8 W top $399 LZTLB9@# Lam. Base Assembly for 8 D x 9 W top $399 LZTLB18@# Lam. Base Assembly for 8 D x 18 W top $399 LZTLB1@# Lam. Base Assembly for 8 D x 1 W top $351 LZTLB13@# Lam. Base Assembly for 8 D x 13 W top $351 LZTLB1@# Lam. Base Assembly for 8 D x 1 W top $351 LZTLB15@# Lam. Base Assembly for 8 D x 15 W top $351 LZTLB18@# Lam. Base Assembly for 8 D x 18 W top $351 LZTLB18@# Lam. Base Assembly for 8 D x 18 W top $158 LZTLB19@# Lam. Base Assembly for 8 D x 19 W top $71 LZTLB@# Lam. Base Assembly for 8 D x W top $71 LZTLB1@# Lam. Base Assembly for 8 D x 1 W top $71 LZTLB8@# Lam. Base Assembly for 8 D x 8 W top $71 LZTLB@# Lam. Base Assembly for 8 D x W top $71 Veneer Concurrence Base and Beam Assemblies for 3 / D Tables LZTVA7@# Veneer Base Assembly for 3 / D x 7 W top $5155 LZTVA8@# Veneer Base Assembly for 3 / D x 8 W top $537 LZTVA9@# Veneer Base Assembly for 3 / D x 9 W top $537 LZTVA18@# Veneer Base Assembly for 3 / D x 18 W top $197 LZTVA1@# Veneer Base Assembly for 3 / D x 1 W top $39 LZTVA13@# Veneer Base Assembly for 3 / D x 13 W top $39 LZTVA1@# Veneer Base Assembly for 3 / D x 1 W top $39 LZTVA15@# Veneer Base Assembly for 3 / D x 15 W top $39 LZTVA18@# Veneer Base Assembly for 3 / D x 18 W top $39 LZTVA18@# Veneer Base Assembly for 3 / D x 18 W top $89 LZTVA19@# Veneer Base Assembly for 3 / D x 19 W top $9787 LZTVA@# Veneer Base Assembly for 3 / D x W top $9787 LZTVA1@# Veneer Base Assembly for 3 / D x 1 W top $9787 LZTVA8@# Veneer Base Assembly for 3 / D x 8 W top $9787 LZTVA@# Veneer Base Assembly for 3 / D x W top $9787 Veneer Concurrence Base and Beam Assemblies for 8 D Tables LZTVB7@# Veneer Base Assembly for 8 D x 7 W top $5977 LZTVB8@# Veneer Base Assembly for 8 D x 8 W top $197 LZTVB9@# Veneer Base Assembly for 8 D x 9 W top $197 LZTVB18@# Veneer Base Assembly for 8 D x 18 W top $197 LZTVB1@# Veneer Base Assembly for 8 D x 1 W top $39 LZTVB13@# Veneer Base Assembly for 8 D x 13 W top $39 LZTVB1@# Veneer Base Assembly for 8 D x 1 W top $39 LZTVB15@# Veneer Base Assembly for 8 D x 15 W top $39 LZTVB18@# Veneer Base Assembly for 8 D x 18 W top $39 LZTVB18@# Veneer Base Assembly for 8 D x 18 W top $89 LZTVB19@# Veneer Base Assembly for 8 D x 19 W top $9787 LZTVB@# Veneer Base Assembly for 8 D x W top $9787 LZTVB1@# Veneer Base Assembly for 8 D x 1 W top $9787 LZTVB8@# Veneer Base Assembly for 8 D x 8 W top $9787 LZTVB@# Veneer Base Assembly for 8 D x W top $9787

27 7 71 Concurrence - Conference Base Assemblies (5"D - "D Tops) (@) Segmentation Suffix List: N Non-Segmented Bases No Charge S Segmented Bases +$31 Tip: Laminate or Veneer filler panels can be Non-Segmented or Segmented. Segmented panels have grooves with aluminum trim. Segmented Panel Option > Individual bases are.75 wide. > Base trim is clear anodized aluminum. > Bases include PDGR cable management. > Product is base and aluminum structural beam kit only. Table top and trough covers are specified separately > Trough covers are available to conceal equipment and hide wiring & cabling. See chart on page 71. > Tops are ordered separately. > Concurrence bases ship partially assembled. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. TABLES STEP - CONCURRENCE STEP Non-Segmented Panel Option A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminate +$ (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (includes $8 58, 3, MC, SP, and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$3 Non-Premium, Formica Premium (WR,, 77,, RD finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time +1% $7 list Stain Match fee) Part Number Description List Price (US$) Laminate Concurrence Base and Beam Assemblies for 5 D Tables LZTLD7@# Lam. Base Assembly for 5 D x 7 W top $71 LZTLD8@# Lam. Base Assembly for 5 D x 8 W top $935 LZTLD9@# Lam. Base Assembly for 5 D x 9 W top $935 LZTL8@# Lam. Base Assembly for 5 D x 18 W top $935 LZTL@# Lam. Base Assembly for 5 D x 1 W top $5377 LZTL3@# Lam. Base Assembly for 5 D x 13 W top $5377 LZTL@# Lam. Base Assembly for 5 D x 1 W top $5377 LZTL5@# Lam. Base Assembly for 5 D x 15 W top $5377 LZTL8@# Lam. Base Assembly for 5 D x 18 W top $5377 LZTL8@# Lam. Base Assembly for 5 D x 18 W top $799 LZTL9@# Lam. Base Assembly for 5 D x 19 W top $858 LZTLD@# Lam. Base Assembly for 5 D x W top $858 LZTL@# Lam. Base Assembly for 5 D x 1 W top $858 LZTLD8@# Lam. Base Assembly for 5 D x 8 W top $858 LZTLD@# Lam. Base Assembly for 5 D x W top $858 Laminate Concurrence Base and Beam Assemblies for D Tables LZTLC7@# Lam. Base Assembly for D x 7 W top $71 LZTLC8@# Lam. Base Assembly for D x 8 W top $935 LZTLC9@# Lam. Base Assembly for D x 9 W top $935 LZTLC18@# Lam. Base Assembly for D x 18 W top $935 LZTLC1@# Lam. Base Assembly for D x 1 W top $5377 LZTLC13@# Lam. Base Assembly for D x 13 W top $5377 LZTLC1@# Lam. Base Assembly for D x 1 W top $5377 LZTLC15@# Lam. Base Assembly for D x 15 W top $5377 LZTLC18@# Lam. Base Assembly for D x 18 W top $5377 LZTLC18@# Lam. Base Assembly for D x 18 W top $799 LZTLC19@# Lam. Base Assembly for D x 19 W top $858 LZTLC@# Lam. Base Assembly for D x W top $858 LZTLC1@# Lam. Base Assembly for D x 1 W top $858 LZTLC8@# Lam. Base Assembly for D x 8 W top $858 LZTLC@# Lam. Base Assembly for D x W top $858 Part Number Description List Price (US$) Veneer Concurrence Base and Beam Assemblies for 5 D Tables LZTVD7@# Veneer Base Assembly for 5 D x 7 W top $73 LZTVD8@# Veneer Base Assembly for 5 D x 8 W top $73 LZTVD9@# Veneer Base Assembly for 5 D x 9 W top $73 LZTV8@# Veneer Base Assembly for 5 D x 18 W top $73 LZTV@# Veneer Base Assembly for 5 D x 1 W top $75 LZTV3@# Veneer Base Assembly for 5 D x 13 W top $75 LZTV@# Veneer Base Assembly for 5 D x 1 W top $75 LZTV5@# Veneer Base Assembly for 5 D x 15 W top $75 LZTV8@# Veneer Base Assembly for 5 D x 18 W top $75 LZTV8@# Veneer Base Assembly for 5 D x 18 W top $1,73 LZTV9@# Veneer Base Assembly for 5 D x 19 W top $11,55 LZTVD@# Veneer Base Assembly for 5 D x W top $11,55 LZTV@# Veneer Base Assembly for 5 D x 1 W top $11,55 LZTVD8@# Veneer Base Assembly for 5 D x 8 W top $11,55 LZTVD@# Veneer Base Assembly for 5 D x W top $11,55 Veneer Concurrence Base and Beam Assemblies for D Tables LZTVC7@# Veneer Base Assembly for D x 7 W top $73 LZTVC8@# Veneer Base Assembly for D x 8 W top $73 LZTVC9@# Veneer Base Assembly for D x 9 W top $73 LZTVC18@# Veneer Base Assembly for D x 18 W top $73 LZTVC1@# Veneer Base Assembly for D x 1 W top $75 LZTVC13@# Veneer Base Assembly for D x 13 W top $75 LZTVC1@# Veneer Base Assembly for D x 1 W top $75 LZTVC15@# Veneer Base Assembly for D x 15 W top $75 LZTVC18@# Veneer Base Assembly for D x 18 W top $75 LZTVC18@# Veneer Base Assembly for D x 18 W top $1,73 LZTVC19@# Veneer Base Assembly for D x 19 W top $11,55 LZTVC@# Veneer Base Assembly for D x W top $11,55 LZTVC1@# Veneer Base Assembly for D x 1 W top $11,55 LZTVC8@# Veneer Base Assembly for D x 8 W top $11,55 LZTVC@# Veneer Base Assembly for D x W top $11,55 Concurrence Sliding Trough Covers* (See chart for maximum ordering quantities) LZLACP18 One trough cover for use with bases for 3 / D tables, silver $8 LZLACP One trough cover for use with bases for 8 D tables, silver $89 LZLACP3 One trough cover for use with bases for 5 D tables, silver $1 LZLACP3 One trough cover for use with bases for D tables, silver $1 *Concurrence Sliding Trough covers for concealing Power/Data under Concurrence conference tables: Top Width Max # of Trough Covers (Trough covers are "W)

28 7 73 Concurrence "Build-Your-Own" Conference Table Bases & Beam Kits Segmentation Suffix List: N Non-Segmented Bases No Charge S Segmented Bases +$15 Tip: Laminate or Veneer filler panels can be Non-Segmented or Segmented. Segmented panels have grooves with aluminum trim. Segmented Panel Option > Bases must be connected with structural beams, ordered separately (page 73). > End Application bases should be inset " from end of table top. > Bases must be same depth (18", ", 3", or 3"). 5"W and 1"W can be used under the same table. > Use 1" base when power/data in table top is directly over the base. > Two bases required for tables up to 18". Three bases required for tables 18"-". > Where required, the third "center application" base must be centered (+/- 1") under the table. > Optional bases can be added for cable management (e.g. when a power/data unit or the floor power monument is in the center of a two base table). > Trough covers are available to conceal equipment and hide wiring & cabling. See chart on page 71. > Tops are ordered separately. > Concurrence bases ship assembled. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. TABLES STEP - CONCURRENCE Non-Segmented Panel Option STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +$ (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (includes $8 58, 3, MC, SP, and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$3 Non-Premium, Formica Premium (WR,, 77,, RD finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time +1% $7 list Stain Match fee) 5" Laminate Concurrence Conference Bases w/ Levelers - End Application LZBE518@# Laminate Base, 18 x 5, for 3/ D table $13 LZBE5@# Laminate Base, x 5, for 8 D table $155 LZBE53@# Laminate Base, 3 x 5, for 5 D table $58 LZBE53@# Laminate Base, 3 x 5, for D table $58 1" Laminate Concurrence Conference Base w/ Access Door & Levelers - End Application LZBE18@# Laminate Base, 18 x 1, for 3/ D table $1978 LZBE@# Laminate Base, x 1, for 8 D table $11 LZBE3@# Laminate Base, 3 x 1, for 5 D table $5 LZBE3@# Laminate Base, 3 x 1, for D table $5 5" Laminate Concurrence Conference Base w/ Levelers - Middle Application LZBM518@# Laminate Base, 18 x 5, for 3/ D table $13 LZBM5@# Laminate Base, x 5, for 8 D table $155 LZBM53@# Laminate Base, 3 x 5, for 5 D table $58 LZBM53@# Laminate Base, 3 x 5, for D table $58 1" Laminate Concurrence Conference Base w/ Access Door & Levelers - Middle Application LZBM18@# Laminate Base, 18 x 1, for 3/ D table $1978 LZBM@# Laminate Base, x 1, for 8 D table $11 LZBM3@# Laminate Base, 3 x 1, for 5 D table $5 LZBM3@# Laminate Base, 3 x 1, for D table $5 5" Veneer Concurrence Conference Base w/ Levelers - End Application LZVBE518@# Veneer Base, 18 x 5, for 3/ D table $5 LZVBE5@# Veneer Base, x 5, for 8 D table $99 LZVBE53@# Veneer Base, 3 x 5, for 5 D table $319 LZVBE53@# Veneer Base, 3 x 5, for D table $319 1" Veneer Concurrence Conference Base w/ Access Door & Levelers - End Application LZVBE18@# Veneer Base, 18 x 1, for 3/ D table $89 LZVBE@# Veneer Base, x 1, for 8 D table $331 LZVBE3@# Veneer Base, 3 x 1, for 5 D table $3835 LZVBE3@# Veneer Base, 3 x 1, for D table $3835 5" Veneer Concurrence Conference Base w/ Levelers - Middle Application LZVBM518@# Veneer Base, 18 x 5, for 3/ D table $5 LZVBM5@# Veneer Base, x 5, for 8 D table $99 LZVBM53@# Veneer Base, 3 x 5, for 5 D table $319 LZVBM53@# Veneer Base, 3 x 5, for D table $319 1" Veneer Concurrence Conference Base w/ Access Door & Levelers - Middle Application LZVBM18@# Veneer Base, 18 x 1, for 3/ D table $89 LZVBM@# Veneer Base, x 1, for 8 D table $331 LZVBM3@# Veneer Base, 3 x 1, for 5 D table $3835 LZVBM3@# Veneer Base, 3 x 1, for D table $3835 Structural Aluminum Beams for use w/ Concurrence Conference Bases LZBK7 Beam Kit for 7 W table (includes two beams) $9 LZBK8 Beam Kit for 8 W table (includes two beams) $98 LZBK9 Beam Kit for 9 W table (includes two beams) $98 LZBK18 Beam Kit for 18 W table (includes two beams) $98 LZBK1 Beam Kit for 1 W table (includes two beams) $183 LZBK13 Beam Kit for 13 W table (includes two beams) $183 LZBK1 Beam Kit for 1 W table (includes two beams) $183 LZBK15 Beam Kit for 15 W table (includes two beams) $183 LZBK18 Beam Kit for 18 W table (includes two beams) $183 LZBK18 Beam Kit for 18 W table (includes four beams) $13 LZBK19 Beam Kit for 19 W table (includes four beams) $37 LZBK Beam Kit for W table (includes four beams) $37 LZBK1 Beam Kit for 1 W table (includes four beams) $37 LZBK8 Beam Kit for 8 W table (includes four beams) $37 LZBK Beam Kit for W table (includes four beams) $37

29 7 75 Concurrence VS (Video Sharing) Tables D (^) Shape Suffix List: W (A) Arc Rectagle STEP (&) Finish and Edge Suffix List: A Standard Laminate - 3mm Edge K Standard Laminate - Knife Edge P Standard Veneer - 3mm Wood Edge R Standard Veneer - Knife Wood Edge D W (B) Half Boat D W (C) Angled > Includes one monitor mount for monitors up to 55. Two monitors up to may be mounted by ordering an alternate mount kit on page 78. > Sliding trough covers conceal technology components, cables and wiring under worksurface. Mast includes access holes for monitor cables. > Includes worksurface. > Ellora VS (video sharing) technology unit ordered separately. See page 77. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Segmented Panel Option STANDARD LAMINATE Non-Segmented Panel Option STANDARD VENEER Panels below the worksurface on mast and on both sides of the panel base are segmented. Panels above the worksurface on the mast and the entire back side of the mast are not segmented. COORDINATING Cabinets for VS Tables are avialable on page 7. Pixley Soft Seating and Lounge VS Tables available on pages TABLES STEP - CONCURRENCE STEP 3 (@) Cut-Out Suffix List: N No Cut-out A Cut-out for PDEVC ( user, single sided), Over Panel Base B Cut-out for PDEVC31 ( user, single sided), Over Panel Base C Cut-out for PDEVC, PDEVD ( user, double sided), Centered D Cut-out for PDEVC, PDEVD ( user, double sided), Centered E Cut-out for PDEVC, PDEVD ( user, double sided), Over Panel Base F Cut-out for PDEVC, PDEVD ( user, double sided), Over Panel Base X Other Tip: Technology sold separately. See page 77. STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-P remium laminates (-38, -). +1% Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +19% MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. 3MM EDGE KNIFE EDGE 3MM WOOD KNIFE WOOD W D H Part Number Description Suffix A Suffix K Suffix P Suffix R Concurrence VS (Video Sharing) Tables - Seated Height (9") 5 7 LZAN9^&@# VS Table, Seated, W $8957 $977 $13,513 $13, LZAN97^&@# VS Table, Seated, 7 W $915 $9 $1,5 $1, LZAN98^&@# VS Table, Seated, 8 W $93 $973 $15,135 $15, LZAN99^&@# VS Table, Seated, 9 W $1,81 $1, $1,8 $17, LZAN91^&@# VS Table, Seated, 1 W $1,8 $11,378 $17,918 $18, LZAN91^&@# VS Table, Seated, 1 W $11,195 $11,73 $19,53 $,7 Concurrence VS (Video Sharing) Tables - Seated Height (9") 5 7 LZAS9^&@# VS Table, Seated, Segmented, W $99 $911 $13,87 $1, LZAS97^&@# VS Table, Seated, Segmented, 7 W $939 $97 $1,388 $1, LZAS98^&@# VS Table, Seated, Segmented, 8 W $9757 $1,77 $15,8 $15, LZAS99^&@# VS Table, Seated, Segmented, 9 W $1,15 $1,735 $17,153 $17, LZAS91^&@# VS Table, Seated, Segmented, 1 W $11,177 $11,71 $18,5 $18, LZAS91^&@# VS Table, Seated, Segmented, 1 W $11,59 $1, $19,89 $,3 Concurrence VS (Video Sharing) Tables - Standing Height (") 5 7 LZAN^&@# VS Table, Standing, W $91 $97 $13,958 $1, LZAN7^&@# VS Table, Standing, 7 W $955 $9871 $1,99 $1, LZAN8^&@# VS Table, Standing, 8 W $987 $1,188 $15,73 $15, LZAN9^&@# VS Table, Standing, 9 W $1,5 $1,87 $17,5 $17, LZAN1^&@# VS Table, Standing, 1 W $11,89 $11,8 $18,33 $18,898 Concurrence VS (Video Sharing) Tables - Standing Height (") 5 7 LZAS^&@# VS Table, Standing, Segmented, W $98 $1,17 $1, $1, LZAS7^&@# VS Table, Standing, Segmented, 7 W $9995 $1,315 $1,93 $15, LZAS8^&@# VS Table, Standing, Segmented, 8 W $1,31 $1,3 $15,918 $1, LZAS9^&@# VS Table, Standing, Segmented, 9 W $1,97 $11,9 $17,71 $18, LZAS1^&@# VS Table, Standing, Segmented, 1 W $11,733 $1,8 $18,88 $19,33 *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1%

30 7 77 Concurrence VS (Video Sharing) Cabinets Concurrence VS (Video Sharing) Power Data Units A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list Stain Match fee) +1% STEP (*) Pull Suffix List: Cabinet > VS Table Cabinets have a finished top and fit under VS table tops against monitor mast. > Includes lock and levelers. > Cabinets include adjustable shelves. > A freight fee of $1 is assessed on orders less than $1 net. See page 13. -Door Cabinets for VS (Video Sharing) Tables Seated Height LZACAL#* Laminate, 5 W x 3 H x 13 D $51 LZACAV#* Veneer, 5 W x 3 H x 13 D $771 -Door Cabinets for VS (Video Sharing) Tables Standing Height LZACBL#* Laminate, 5 W x 3 H x 13 D $318 LZACBV#* Veneer, 5 W x 3 H x 13 D $88 Video Sharing Power Data > Ellora VS (Video Sharing) Technology provides collaboration and interaction by allowing users to take control of flat screen displays by pressing a button on the show me HDMI cord. > Two monitor applications come with control boxes. Show Me cables are dedicated to one of two monitors. Half the Show Me cables will display on one monitor while the other half will display on the second monitor. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part # # Users Cut-Out Size Description List Price (US$) Ellora Single Sided VS (Video Share) Technology for 1 Monitor - HDMI, ' power cord PDEVCA 5 x 11 power/ data openings/ Video Sharing HDMI cords, Clear Anodized Alum. $59 PDEVCR 5 x 11 power/ data openings/ Video Sharing HDMI cords, Black Anodized Alum. $5711 PDEVC31A 5 x 1 3 power/1 data opening/ Video Sharing HDMI cords, Clear Anodized Alum. $815 PDEVC31R 5 x 1 3 power/1 data opening/ Video Sharing HDMI cords, Black Anodized Alum. $87 Ellora Double-Sided VS (Video Share) Technology for 1 Monitor - HDMI, two ' power cords PDEVCA 9.81 x 11 power/ data openings/ Video Sharing HDMI cords, Clear Anodized Alum. $838 PDEVCR 9.81 x 11 power/ data openings/ Video Sharing HDMI cords, Black Anodized Alum. $873 PDEVCA 9.81 x 1 power/ data openings/ Video Sharing HDMI cords, Clear Anodized Alum. $13,11 PDEVCR 9.81 x 1 power/ data openings/ Video Sharing HDMI cords, Black Anodized Alum. $13,553 Ellora Double-Sided VS (Video Share) Technology for Monitors - HDMI, two ' power cords PDEVDA 9.81 x 11 power/ data openings/ Video Sharing HDMI cords, Clear Anodized Alum. $1,333 PDEVDR 9.81 x 11 power/ data openings/ Video Sharing HDMI cords, Black Anodized Alum. $1,97 PDEVDA 9.81 x 1 power/ data openings/ Video Sharing HDMI cords, Clear Anodized Alum. $13,333 PDEVDR 9.81 x 1 power/ data openings/ Video Sharing HDMI cords, Black Anodized Alum. $13,7 Tip: VS Technology for monitors contains control boxes. Half the Show Me cables will control one monitor and the other half control another. TABLES STEP - CONCURRENCE (A) Arc (B) Bar

31 78 79 Concurrence Monitor Walls & Monitors (*) Pull Suffix List: (A) Arc STEP (B) Bar A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non- Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Includes one monitor mount for most monitors up to 55. Two monitors up to may be mounted by ordering an alternate mount kit below. > Includes lock and levelers. > Monitors ordered separately. > -door cabinets include adjustable shelves. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Concurrence Monitor Walls - Wall Mount with -Drawer Cabinet 5 W x 1 H x 15.5 D LZMLN51*# Laminate Monitor Wall - Wall Mount w/-drawer Cabinet $5553 LZMVN51*# Veneer Monitor Wall - Wall Mount w/-drawer Cabinet $11,18 Concurrence Monitor Wall - Wall Mount with -Door Cabinet, 5 W x 7 H x 15.5 D LZMLC57*# Laminate Monitor Wall - Wall Mount with -Door Cabinet $7 LZMVC57*# Veneer Monitor Wall - Wall Mount with -Door Cabinet $13,55 Concurrence Monitor Wall - Freestanding On Levelers w/ -Door Cabinet, 5"W x 7"H x 15.5"D LZMLD57*# Laminate Monitor Wall - Freestanding $7 LZMVD57*# Veneer Monitor Wall - Freestanding $13,55 Tip: Freestanding Monitor Wall must be positioned with back against wall. Monitor Mounting Bracket for two Monitors on VS Tables and Monitor Wall LZMMB Bracket for two monitor application $8 Tip: Holds up to two monitors. Notes TABLES STEP - CONCURRENCE

32 8 81 Disc and Square Bases Disc Bases w/ Power Data Top Plate (^) Paint Suffix List G Storm R Black S Silver T Medium Tone U Chrome (LDFA, LDFB, LDGA, +$95 LDFAF, LDFBF, LDGAF)* V Chrome (LDFC, LDGB, LDFCF, +$75 LDGBF)* W Arctic White Z Other *Tip: Chrome is not available on Square bases,ldfdf, LDFD, and Disc Bases with power data top plate. Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > For Square bases, vertical column is square. > For shorter heights put "X" in front of the part number and add $5 list. For taller heights, put "XX" in front of the part number and add $8 list. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Description List Price (US$) Low Profile Disc Bases, No Levelers Desk/Dining Height (7.75 Tall) LDFAF^ Disc Base (17 diameter), for - 3 round or - 3 square top $5 LDFBF^ Disc Base (3 diameter), for round or 3 square top $59 LDFCF^ Disc Base (7 diameter), for 8 round or square top $713 LDFDF^ Disc Base (3 diameter), for 5 - round or 8 square top $18 Low Profile Disc Bases, No Levelers Bar Height (.75 Tall) LDGAF^ Disc Base, (3 diameter), Bar Height, for -3 round or -3 square top $75 LDGBF^ Disc Base (7 diameter), Bar Height, for round or 3 square top $817 > Special Top Plate allows room for Power/Data in center of top. > Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units. > Bases with Power/Data Top Plate include hole in side of leg near the bottom for cable management. > Disc bases with Power/Data Top Plate not available in chrome. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Flat Steel Disc Bases, No Levelers, with Power/Data Top Plate Desk/Dining Height (7.75 Tall) LD3FAF^ Disc Base (17 diameter), P/D Top Plate, for - 3 round or - 3 square top $51 LD3FBF^ Disc Base (3 diameter), P/D Top Plate, for round or 3 square top $73 LD3FCF^ Disc Base (7 diameter), P/D Top Plate, for 8 round or square top $8 Flat Steel Disc Bases, No Levelers, with Power/Data Top Plate Bar Height (.75 Tall) LD3GAF^ Disc Base (3 diameter), P/D Top Plate, for -3 round or -3 square top $8 LD3GBF^ Disc Base (7 diameter), P/D Top Plate, for round or 3 square top $97 TABLES STEP - CONCURRENCE Steel Disc Bases with Levelers Desk/Dining Height (8.5 Tall) LDFA^ Disc Base (17 diameter) for - 3 round or - 3 square top $3 LDFB^ Disc Base (3 diameter) for round or 3 square top $8 LDFC^ Disc Base (7 diameter) for 8 round or square top $83 LDFD^ Disc Base (3 diameter) for 5 - round or 8 square top $179 Steel Disc Bases, with Levelers and Power/Data Top Plate Desk/Dining Height (8.5 Tall) LD3FA^ Disc Base (17 diameter), P/D Top Plate, for - 3 round or - 3 square top $7 LD3FB^ Disc Base (3 diameter), P/D Top Plate, for round or 3 square top $817 LD3FC^ Disc Base (7 diameter), P/D Top Plate, for 8 round or square top $955 LD3FD^ DIsc Base (3 diameter), P/D Top Plate, for 5 - round or 8 square top $53 Tip: Flip-n-Go Power/Data units and Ellora Double-sided units with power or 8 power will not fit the 3 diameter Disc Base. Steel Disc Bases with Levelers Bar Height (1.5 Tall) LDGA^ Disc Base (3 diameter), Bar Height, for -3 round or -3 square top $79 LDGB^ Disc Base (7 diameter), Bar Height, for round or 3 square top $95 Steel Disc Bases, with Levelers and Power/Data Top Plate Bar Height (1.5 Tall) LD3GA^ Disc Base (3 diameter), P/D Top Plate, for -3 round or -3 square top $899 LD3GB^ Disc Base (7 diameter), P/D Top Plate, for round or 3 square top $13 Low Profile Square Bases with Levelers - Desk/Dining Height (7.75 Tall) LDSQ1A^ Flat Steel Square Base (17 ) for - 3 round or - 3 square top $71 LDSQ1B^ Flat Steel Square Base ( ) for round or 3 square top $773 LDSQ1C^ Flat Steel Square Base (7 ) for 8 round or square top $19 Low Profile Square Bases with Levelers - Bar Height (.75 Tall) LDSQA^ Flat Steel Square Base (17 ), Bar Height, for - 3 round or - 3 square tops $858 LDSQB^ Flat Steel Square Base ( ), Bar Height, for round or 3 - square tops $157

33 8 83 ebench Tables (Complete Tables) ) Cable Management Suffix List N No Cable Management No charge G Grommet (one, centered) +$18 K One Power/Data Cut-out (centered) +$3 C Two Power/Data Cut-outs +$7 E Three Power/Data Cut-outs +$18 X Other TBD STEP (^) Paint Suffix List S Silver G Storm +$3 R Black +$3 T Medium Tone +$3 W Arctic White +$3 Z Other TBD Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP 3 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +$3 (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard +$5 (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$7 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Includes 3/ floating laminate top with 3mm edge, structure, legs, and fasteners > Ships unassembled > Standard in silver paint, other standard paints available for an upcharge. > 9 - W tables include one magnetic vertical cable manager for concealed routing. > For 8 and 7 W tables with power, a PDVCM, ordered separately, is recommended for vertical cable management. > A freight fee of $1 net is assessed on orders less than $1 net. See page D ebench Table, 3mm Edge EBZ88@^# Complete Table 8 W $11 EBZ87@^# Complete Table 7 W $178 EBZ89@^# Complete Table 9 W, for use w/ none or two PD cutouts $958 EBZ81@^# Complete Table 1 W, for use w/ none or two PD cutouts $31 EBZ81@^# Complete Table 1 W, for use w/ none or two PD cutouts $398 EBZ813@^# Complete Table 1 W, for use w/ one or three PD cutouts $19 EBZ815@^# Complete Table 15 W $59 EBZ818@^# Complete Table 18 W $1 EBZ818@^# Complete Table 18 W $9 EBZ819@^# Complete Table 19 W $871 EBZ8@^# Complete Table W $55 EBZ81@^# Complete Table 1 W $59 EBZ8@^# Complete Table W, for use w/ none or two PD cutouts $3 EBZ85@^# Complete Table W, for use w/ one or three PD cutouts $91 D ebench Tables, 3mm Edge EBZ@^# Complete Table W $175 EBZ7@^# Complete Table 7 W $19 EBZ9@^# Complete Table 9 W, for use w/ none or two PD cutouts $318 EBZ1@^# Complete Table 1 W, for use w/ none or two PD cutouts $357 EBZ1@^# Complete Table 1 W, for use w/ none or two PD cutouts $373 EBZ13@^# Complete Table 1 W, for use w/ one or three PD cutouts $53 EBZ15@^# Complete Table 15 W $891 EBZ18@^# Complete Table 18 W $53 EBZ18@^# Complete Table 18 W $51 EBZ19@^# Complete Table 19 W $5317 EBZ@^# Complete Table W $57 EBZ1@^# Complete Table 1 W $53 EBZ@^# Complete Table W, for use w/ none or two PD cutouts $87 EBZ5@^# Complete Table W, for use w/ one or three PD cutouts $7393 Notes TABLES STEP - CONCURRENCE

34 8 85 Equilibrium Conference Bases Patent Pending - Bases & Cantilever Top Supports (^) Paint Suffix List S Silver (textured) G Storm (textured) R Black (textured) T Medium Tone (textured) W Arctic White (textured) Z Other (textured) Tip: For other available colors, contact designteam@enwork.com. +$TBD Tip: Bases & Cantilever Top Supports can be ordered different paint colors for two-tone effect. STEP - Triangle Bases Only (@) Cover Option Suffix List I Inner Covers E End Covers Product Specification: > Bases support conference tops 3 - D. > Bases require Cantilever Top Supports, ordered separately (page 85). > Bases are ordered in multiple pieces for design flexibility. > Base must bolt to a concrete floor. Fasteners provided. > Power data units are housed between cantilever supports. Ordered separately. > Cantilever support trough covers provided to conceal power and cable routing. Exception: Positioning for some power/data assemblies (e.g. Oasis) is limited due to base structure. > Trough covers not included with Truss design cantilever supports. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Seated Height Equilibrium Inverse V Base, 9 H EQV9^ Inverse V Base, for 8-1 W tops w/ Centered Cantilever Supports $913 EQV98^ Inverse V Base, for 15- W tops w/ Centered Cantilever Supports and $ W tops w/ Offset Cantilever Supports Tip: Inverse V bases include magnetic inner cable management covers. Two of inner covers have a mousehole for cord pass thru. Tip: Bases require Cantilever Top Supports, ordered separately. Standing Height Equilibrium Inverse V Base, H EQV^ Inverse V Base, for 8-1 W tops w/ Centered Cantilever Supports $1, EQV8^ Inverse V Base, for 15- W tops w/ Centered Cantilever Supports and $1, 1-19 W tops w/ Offset Cantilever Supports Tip: Inverse V bases include magnetic inner cable management covers. Two of inner covers have a mousehole for cord pass thru. Tip: Bases require Cantilever Top Supports, ordered separately. Seated Height Equilibrium Triangle Base, 9 H EQT9^@ Triangle Base, for 8-1 W tops w/ Centered Cantilever Supports $935 EQT98^@ Triangle Base, for 15- W tops w/ Centered Cantilever Supports and $ W tops w/ Offset Cantilever Supports Tip: Triangle base includes one set of magnetic inner cable management covers. See step to select inner or end covers. Tip: Inner covers enclose each leg and provide concealed power and cable routing. Base is open in the middle. End covers fully enclose the base, concealing hardware, technology, and floor monument. Tip: Bases require Cantilever Top Supports, ordered separately. Centered Equilibrium Cantilever Top Supports, Solid Design EQC8^ Centered Top Supports, Qty., Solid Design for 8 top $8 EQC9^ Centered Top Supports, Qty., Solid Design for 9 top $8 EQC18^ Centered Top Supports, Qty., Solid Design for 18 top $888 EQC1^ Centered Top Supports, Qty., Solid Design for 1 top $1, EQC13^ Centered Top Supports, Qty., Solid Design for 13 top $1, EQC1^ Centered Top Supports, Qty., Solid Design for 1 top $1,8 EQC15^ Centered Top Supports, Qty., Solid Design for 15 top $11,58 EQC18^ Centered Top Supports, Qty., Solid Design for 18 top $1, EQC18^ Centered Top Supports, Qty., Solid Design for 18 top $1, EQC19^ Centered Top Supports, Qty., Solid Design for 19 top $1,7 EQC^ Centered Top Supports, Qty., Solid Design for top $13,3 EQC1^ Centered Top Supports, Qty., Solid Design for 1 top $13,5 EQC8^ Centered Top Supports, Qty., Solid Design for 8 top $1, EQC^ Centered Top Supports, Qty., Solid Design for top $1, Offset Equilibrium Cantilever Top Supports, Solid Design EQFF1^ Offset Top Supports, Qty., Solid Design for 1 top $1, EQFF13^ Offset Top Supports, Qty., Solid Design for 13 top $1,5 EQFF1^ Offset Top Supports, Qty., Solid Design for 1 top $1,8 EQFF15^ Offset Top Supports, Qty., Solid Design for 15 top $11,58 EQFF18^ Offset Top Supports, Qty., Solid Design for 18 top $1, EQFF18^ Offset Top Supports, Qty., Solid Design for 18 top $1, EQFF19^ Offset Top Supports, Qty., Solid Design for 19 top $1,7 Centered Equilibrium Cantilever Top Supports, Truss Design EQWC8^ Centered Top Supports, Qty., Truss Design for 8 top $9 EQWC9^ Centered Top Supports, Qty., Truss Design for 9 top $9 EQWC18^ Centered Top Supports, Qty., Truss Design for 18 top $1, EQWC1^ Centered Top Supports, Qty., Truss Design for 1 top $1, EQWC13^ Centered Top Supports, Qty., Truss Design for 13 top $1, EQWC1^ Centered Top Supports, Qty., Truss Design for 1 top $13, EQWC15^ Centered Top Supports, Qty., Truss Design for 15 top $13, EQWC18^ Centered Top Supports, Qty., Truss Design for 18 top $13,5 EQWC18^ Centered Top Supports, Qty., Truss Design for 18 top $1,5 EQWC19^ Centered Top Supports, Qty., Truss Design for 19 top $15, EQWC^ Centered Top Supports, Qty., Truss Design for top $1, EQWC1^ Centered Top Supports, Qty., Truss Design for 1 top $1, EQWC8^ Centered Top Supports, Qty., Truss Design for 8 top $1,8 EQWC^ Centered Top Supports, Qty., Truss Design for top $17, TABLES STEP - EQUILIBRIUM Tip: Cantilever trough covers not included with truss design. Disclaimer Equilibrium tables must be installed directly onto a four inch minimum thickness concrete floor using factory provided hardware. Warning Failure to install on four inch thick concrete floor or failure to follow instruction may cause table to function improperly and could lead to personal injury and or structural damage. Equilibrium assembled can weigh between 35 and 1,7 pounds depending on configuration and is supported in a three and a half square foot area. It is the responsibility of the dealer and or end user to determine if the installation location for Equilibrium is suitable. Enwork is not responsible for any structure failures or personal injuries due to improper installation or improper use of product. Offset Equilibrium Cantilever Top Supports, Truss Design EQWFF1^ Offset Top Supports, Qty., Truss Design for 1 top $1, EQWFF13^ Offset Top Supports, Qty., Truss Design for 13 top $1, EQWFF1^ Offset Top Supports, Qty., Truss Design for 1 top $13, EQWFF15^ Offset Top Supports, Qty., Truss Design for 15 top $13, EQWFF18^ Offset Top Supports, Qty., Truss Design for 18 top $13,5 EQWFF18^ Offset Top Supports, Qty., Truss Design for 18 top $1,5 EQWFF19^ Offset Top Supports, Qty., Truss Design for 19 top $15, Tip: Cantilever trough covers not included with truss design. Note Installation requires at least two people.

35 8 87 Foundation - Base Assemblies for 8"D Boat/Capsule/Ellipse Tops A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base is "W and 7.75 H. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > All Bases in Base Kit include 1 removable door and levelers. > Trough includes cable grippers for cable retention. > Trough includes removable bottom panel. > Braces are not required on tables with the Panel Base Kit. > Door kits for top access to trough are located on page 1. > 15 Oasis Power does not fit on 7 W table kits. 3 Oasis only fits on 9 W, 18 W, and 19 W kits. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Foundation Panel Base and Trough Assemblies for 8"D Boat/Capsule Tables LPTLN87# Lam. Base Assembly for 8 x 7 Bt./Cap. Top $155 LPTLN88# Lam. Base Assembly for 8 x 8 Bt./Cap. Top $155 LPTLN89# Lam. Base Assembly for 8 x 9 Bt./Cap. Top $155 LPTLN818# Lam. Base Assembly for 8 x 18 Bt./Cap. Top $89 LPTLN81# Lam. Base Assembly for 8 x 1 Bt./Cap. Top $89 LPTLN813# Lam. Base Assembly for 8 x 13 Bt./Cap. Top $89 LPTLN81# Lam. Base Assembly for 8 x 1 Bt./Cap. Top $89 LPTLN815# Lam. Base Assembly for 8 x 15 Bt./Cap. Top $89 LPTLN818# Lam. Base Assembly for 8 x 18 Bt./Cap. Top $89 LPTLN818# Lam. Base Assembly for 8 x 18 Bt./Cap. Top $89 LPTLN819# Lam. Base Assembly for 8 x 19 Bt./Cap. Top $89 COORDINATING See pages for coordinating Foundation furniture. Veneer Foundation Panel Base and Trough Assemblies for 8"D Boat/Capsule Tables LPTVN87# Veneer Base Assembly for 8 x 7 Bt./Cap. Top $3987 LPTVN88# Veneer Base Assembly for 8 x 8 Bt./Cap. Top $9 LPTVN89# Veneer Base Assembly for 8 x 9 Bt./Cap. Top $1 LPTVN818# Veneer Base Assembly for 8 x 18 Bt./Cap. Top $7 LPTVN81# Veneer Base Assembly for 8 x 1 Bt./Cap. Top $953 LPTVN813# Veneer Base Assembly for 8 x 13 Bt./Cap. Top $75 LPTVN81# Veneer Base Assembly for 8 x 1 Bt./Cap. Top $7571 LPTVN815# Veneer Base Assembly for 8 x 15 Bt./Cap. Top $787 LPTVN818# Veneer Base Assembly for 8 x 18 Bt./Cap. Top $8188 LPTVN818# Veneer Base Assembly for 8 x 18 Bt./Cap. Top $89 LPTVN819# Veneer Base Assembly for 8 x 19 Bt./Cap. Top $8795 TABLES STEP - FOUNDATION LPTLN8# Lam. Base Assembly for 8 x Bt./Cap. Top $3818 LPTLN81# Lam. Base Assembly for 8 x 1 Bt./Cap. Top $3818 LPTLN88# Lam. Base Assembly for 8 x 8 Bt./Cap. Top $3818 LPTLN8# Lam. Base Assembly for 8 x Bt./Cap. Top $3818 LPTVN8# Veneer Base Assembly for 8 x Bt./Cap. Top $1,99 LPTVN81# Veneer Base Assembly for 8 x 1 Bt./Cap. Top $11,3 LPTVN88# Veneer Base Assembly for 8 x 8 Bt./Cap. Top $11,19 LPTVN8# Veneer Base Assembly for 8 x Bt./Cap. Top $11,9 Laminate Foundation Panel Base and Trough Assemblies with Aluminum Trim for 8"D Boat/Capsule Tables LPTLA87# Lam. Base Assembly, Alum. for 8 x 7 Bt./Cap. Top $15 LPTLA88# Lam. Base Assembly, Alum. for 8 x 8 Bt./Cap. Top $15 LPTLA89# Lam. Base Assembly, Alum. for 8 x 9 Bt./Cap. Top $15 Veneer Foundation Panel Base and Trough Assemblies with Aluminum Trim for 8"D Boat/Capsule Tables LPTVA87# Veneer Base Assembly, Alum. for 8 x 7 Bt./Cap. Top $11 LPTVA88# Veneer Base Assembly, Alum. for 8 x 8 Bt./Cap. Top $ LPTVA89# Veneer Base Assembly, Alum. for 8 x 9 Bt./Cap. Top $73 LPTLA818# Lam. Base Assembly, Alum. for 8 x 18 Bt./Cap. Top $338 LPTLA81# Lam. Base Assembly, Alum. for 8 x 1 Bt./Cap. Top $338 LPTLA813# Lam. Base Assembly, Alum. for 8 x 13 Bt./Cap. Top $338 LPTLA81# Lam. Base Assembly, Alum. for 8 x 1 Bt./Cap. Top $338 LPTLA815# Lam. Base Assembly, Alum. for 8 x 15 Bt./Cap. Top $338 LPTLA818# Lam. Base Assembly, Alum. for 8 x 18 Bt./Cap. Top $338 LPTLA818# Lam. Base Assembly, Alum. for 8 x 18 Bt./Cap. Top $338 LPTLA819# Lam. Base Assembly, Alum. for 8 x 19 Bt./Cap. Top $338 LPTVA818# Veneer Base Assembly, Alum. for 8 x 18 Bt./Cap. Top $9 LPTVA81# Veneer Base Assembly, Alum. for 8 x 1 Bt./Cap. Top $7193 LPTVA813# Veneer Base Assembly, Alum. for 8 x 13 Bt./Cap. Top $777 LPTVA81# Veneer Base Assembly, Alum. for 8 x 1 Bt./Cap. Top $771 LPTVA815# Veneer Base Assembly, Alum. for 8 x 15 Bt./Cap. Top $85 LPTVA818# Veneer Base Assembly, Alum. for 8 x 18 Bt./Cap. Top $8337 LPTVA818# Veneer Base Assembly, Alum. for 8 x 18 Bt./Cap. Top $8 LPTVA819# Veneer Base Assembly, Alum. for 8 x 19 Bt./Cap. Top $898 LPTLA8# Lam. Base Assembly, Alum. for 8 x Bt./Cap. Top $588 LPTLA81# Lam. Base Assembly, Alum. for 8 x 1 Bt./Cap. Top $588 LPTLA88# Lam. Base Assembly, Alum. for 8 x 8 Bt./Cap. Top $588 LPTLA8# Lam. Base Assembly, Alum. for 8 x Bt./Cap. Top $588 LPTVA8# Veneer Base Assembly, Alum. for 8 x Bt./Cap. Top $11, LPTVA81# Veneer Base Assembly, Alum. for 8 x 1 Bt./Cap. Top $11,511 LPTVA88# Veneer Base Assembly, Alum. for 8 x 8 Bt./Cap. Top $11,799 LPTVA8# Veneer Base Assembly, Alum. for 8 x Bt./Cap. Top $1,8

36 88 89 Foundation - Base Assemblies for 5"D Boat/Capsule/Ellipse Tops A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base is "W and 7.75 H. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > All Bases in Base Kit include 1 removable door and levelers. > Trough includes cable grippers for cable retention. > Trough includes removable bottom panel. > Braces are not required on tables with the Panel Base Kit. > Door kits for top access to trough are located on page 1. > 15 Oasis Power does not fit on 7 W table kits. 3 Oasis only fits on 9 W, 18 W, and 19 W kits. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Description List Price (US$) Laminate Foundation Panel Base and Trough Assemblies for 5"D Boat/Capsule Tables LPTLN57# Lam. Base Assembly for 5 x 7 Bt./Cap. Top $1719 LPTLN58# Lam. Base Assembly for 5 x 8 Bt./Cap. Top $1719 LPTLN59# Lam. Base Assembly for 5 x 9 Bt./Cap. Top $1719 LPTLN518# Lam. Base Assembly for 5 x 18 Bt./Cap. Top $319 LPTLN51# Lam. Base Assembly for 5 x 1 Bt./Cap. Top $319 LPTLN513# Lam. Base Assembly for 5 x 13 Bt./Cap. Top $319 LPTLN51# Lam. Base Assembly for 5 x 1 Bt./Cap. Top $319 LPTLN515# Lam. Base Assembly for 5 x 15 Bt./Cap. Top $319 LPTLN518# Lam. Base Assembly for 5 x 18 Bt./Cap. Top $319 LPTLN518# Lam. Base Assembly for 5 x 18 Bt./Cap. Top $319 LPTLN519# Lam. Base Assembly for 5 x 19 Bt./Cap. Top $319 COORDINATING See pages for coordinating Foundation furniture. Veneer Foundation Panel Base and Trough Assemblies for 5"D Boat/Capsule Tables LPTVN57# Veneer Base Assembly for 5 x 7 Bt./Cap. Top $5 LPTVN58# Veneer Base Assembly for 5 x 8 Bt./Cap. Top $757 LPTVN59# Veneer Base Assembly for 5 x 9 Bt./Cap. Top $5 LPTVN518# Veneer Base Assembly for 5 x 18 Bt./Cap. Top $75 LPTVN51# Veneer Base Assembly for 5 x 1 Bt./Cap. Top $783 LPTVN513# Veneer Base Assembly for 5 x 13 Bt./Cap. Top $813 LPTVN51# Veneer Base Assembly for 5 x 1 Bt./Cap. Top $87 LPTVN515# Veneer Base Assembly for 5 x 15 Bt./Cap. Top $8753 LPTVN518# Veneer Base Assembly for 5 x 18 Bt./Cap. Top $97 LPTVN518# Veneer Base Assembly for 5 x 18 Bt./Cap. Top $937 LPTVN519# Veneer Base Assembly for 5 x 19 Bt./Cap. Top $97 TABLES STEP - FOUNDATION LPTLN5# Lam. Base Assembly for 5 x Bt./Cap. Top $5 LPTLN51# Lam. Base Assembly for 5 x 1 Bt./Cap. Top $5 LPTLN58# Lam. Base Assembly for 5 x 8 Bt./Cap. Top $5 LPTLN5# Lam. Base Assembly for 5 x Bt./Cap. Top $5 LPTVN5# Veneer Base Assembly for 5 x Bt./Cap. Top $1,88 LPTVN51# Veneer Base Assembly for 5 x 1 Bt./Cap. Top $1,591 LPTVN58# Veneer Base Assembly for 5 x 8 Bt./Cap. Top $1,91 LPTVN5# Veneer Base Assembly for 5 x Bt./Cap. Top $13,1 Laminate Foundation Panel Base and Trough Assemblies with Aluminum Trim for 5"D Boat/Capsule Tables LPTLA57# Lam. Base Assembly, Alum. for 5 x 7 Bt./Cap. Top $9 LPTLA58# Lam. Base Assembly, Alum. for 5 x 8 Bt./Cap. Top $9 LPTLA59# Lam. Base Assembly, Alum. for 5 x 9 Bt./Cap. Top $9 Veneer Foundation Panel Base and Trough Assemblies with Aluminum Trim for 5"D Boat/Capsule Tables LPTVA57# Veneer Base Assembly, Alum. for 5 x 7 Bt./Cap. Top $5 LPTVA58# Veneer Base Assembly, Alum. for 5 x 8 Bt./Cap. Top $87 LPTVA59# Veneer Base Assembly, Alum. for 5 x 9 Bt./Cap. Top $5131 LPTLA518# Lam. Base Assembly, Alum. for 5 x 18 Bt./Cap. Top $89 LPTLA51# Lam. Base Assembly, Alum. for 5 x 1 Bt./Cap. Top $89 LPTLA513# Lam. Base Assembly, Alum. for 5 x 13 Bt./Cap. Top $89 LPTLA51# Lam. Base Assembly, Alum. for 5 x 1 Bt./Cap. Top $89 LPTLA515# Lam. Base Assembly, Alum. for 5 x 15 Bt./Cap. Top $89 LPTLA518# Lam. Base Assembly, Alum. for 5 x 18 Bt./Cap. Top $89 LPTLA518# Lam. Base Assembly, Alum. for 5 x 18 Bt./Cap. Top $89 LPTLA519# Lam. Base Assembly, Alum. for 5 x 19 Bt./Cap. Top $89 LPTVA518# Veneer Base Assembly, Alum. for 5 x 18 Bt./Cap. Top $7717 LPTVA51# Veneer Base Assembly, Alum. for 5 x 1 Bt./Cap. Top $83 LPTVA513# Veneer Base Assembly, Alum. for 5 x 13 Bt./Cap. Top $888 LPTVA51# Veneer Base Assembly, Alum. for 5 x 1 Bt./Cap. Top $857 LPTVA515# Veneer Base Assembly, Alum. for 5 x 15 Bt./Cap. Top $88 LPTVA518# Veneer Base Assembly, Alum. for 5 x 18 Bt./Cap. Top $915 LPTVA518# Veneer Base Assembly, Alum. for 5 x 18 Bt./Cap. Top $935 LPTVA519# Veneer Base Assembly, Alum. for 5 x 19 Bt./Cap. Top $9718 LPTLA5# Lam. Base Assembly, Alum. for 5 x Bt./Cap. Top $588 LPTLA51# Lam. Base Assembly, Alum. for 5 x 1 Bt./Cap. Top $588 LPTLA58# Lam. Base Assembly, Alum. for 5 x 8 Bt./Cap. Top $588 LPTLA5# Lam. Base Assembly, Alum. for 5 x Bt./Cap. Top $588 LPTVA5# Veneer Base Assembly, Alum. for 5 x Bt./Cap. Top $1,9 LPTVA51# Veneer Base Assembly, Alum. for 5 x 1 Bt./Cap. Top $1,73 LPTVA58# Veneer Base Assembly, Alum. for 5 x 8 Bt./Cap. Top $13,1 LPTVA5# Veneer Base Assembly, Alum. for 5 x Bt./Cap. Top $13,3

37 9 91 Foundation - Base Assemblies for "D Boat/Capsule/Ellipse Tops A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base is "W and 7.75 H. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > All Bases in Base Kit include 1 removable door and levelers. > Trough includes cable grippers for cable retention. > Trough includes removable bottom panel. > Braces are not required on tables with the Panel Base Kit. > Door kits for top access to trough are located on page 1. > 15 Oasis Power does not fit on 7 W table kits. 3 Oasis only fits on 9 W, 18 W, and 19 W kits. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Foundation Panel Base and Trough Assemblies for "D Boat/Capsule Tables LPTLN7# Lam. Base Assembly for x 7 Bt./Cap. Top $1719 LPTLN8# Lam. Base Assembly for x 8 Bt./Cap. Top $1719 LPTLN9# Lam. Base Assembly for x 9 Bt./Cap. Top $1719 LPTLN18# Lam. Base Assembly for x 18 Bt./Cap. Top $319 LPTLN1# Lam. Base Assembly for x 1 Bt./Cap. Top $319 LPTLN13# Lam. Base Assembly for x 13 Bt./Cap. Top $319 LPTLN1# Lam. Base Assembly for x 1 Bt./Cap. Top $319 LPTLN15# Lam. Base Assembly for x 15 Bt./Cap. Top $319 LPTLN18# Lam. Base Assembly for x 18 Bt./Cap. Top $319 LPTLN18# Lam. Base Assembly for x 18 Bt./Cap. Top $319 LPTLN19# Lam. Base Assembly for x 19 Bt./Cap. Top $319 COORDINATING See pages for coordinating Foundation furniture. Veneer Foundation Panel Base and Trough Assemblies for "D Boat/Capsule Tables LPTVN7# Veneer Base Assembly for x 7 Bt./Cap. Top $5 LPTVN8# Veneer Base Assembly for x 8 Bt./Cap. Top $757 LPTVN9# Veneer Base Assembly for x 9 Bt./Cap. Top $5 LPTVN18# Veneer Base Assembly for x 18 Bt./Cap. Top $75 LPTVN1# Veneer Base Assembly for x 1 Bt./Cap. Top $783 LPTVN13# Veneer Base Assembly for x 13 Bt./Cap. Top $813 LPTVN1# Veneer Base Assembly for x 1 Bt./Cap. Top $87 LPTVN15# Veneer Base Assembly for x 15 Bt./Cap. Top $8753 LPTVN18# Veneer Base Assembly for x 18 Bt./Cap. Top $97 LPTVN18# Veneer Base Assembly for x 18 Bt./Cap. Top $937 LPTVN19# Veneer Base Assembly for x 19 Bt./Cap. Top $97 TABLES STEP - FOUNDATION LPTLN# Lam. Base Assembly for x Bt./Cap. Top $5 LPTLN1# Lam. Base Assembly for x 1 Bt./Cap. Top $5 LPTLN8# Lam. Base Assembly for x 8 Bt./Cap. Top $5 LPTLN# Lam. Base Assembly for x Bt./Cap. Top $5 LPTVN# Veneer Base Assembly for x Bt./Cap. Top $1,88 LPTVN1# Veneer Base Assembly for x 1 Bt./Cap. Top $1,591 LPTVN8# Veneer Base Assembly for x 8 Bt./Cap. Top $1,91 LPTVN# Veneer Base Assembly for x Bt./Cap. Top $13,1 Laminate Foundation Panel Base and Trough Assemblies with Aluminum Trim for "D Boat/Capsule Tables LPTLA7# Lam. Base Assembly, Alum. for x 7 Bt./Cap. Top $9 LPTLA8# Lam. Base Assembly, Alum. for x 8 Bt./Cap. Top $9 LPTLA9# Lam. Base Assembly, Alum. for x 9 Bt./Cap. Top $9 Veneer Foundation Panel Base and Trough Assemblies with Aluminum Trim for "D Boat/Capsule Tables LPTVA7# Veneer Base Assembly, Alum. for x 7 Bt./Cap. Top $5 LPTVA8# Veneer Base Assembly, Alum. for x 8 Bt./Cap. Top $87 LPTVA9# Veneer Base Assembly, Alum. for x 9 Bt./Cap. Top $5131 LPTLA18# Lam. Base Assembly, Alum. for x 18 Bt./Cap. Top $89 LPTLA1# Lam. Base Assembly, Alum. for x 1 Bt./Cap. Top $89 LPTLA13# Lam. Base Assembly, Alum. for x 13 Bt./Cap. Top $89 LPTLA1# Lam. Base Assembly, Alum. for x 1 Bt./Cap. Top $89 LPTLA15# Lam. Base Assembly, Alum. for x 15 Bt./Cap. Top $89 LPTLA18# Lam. Base Assembly, Alum. for x 18 Bt./Cap. Top $89 LPTLA18# Lam. Base Assembly, Alum. for x 18 Bt./Cap. Top $89 LPTLA19# Lam. Base Assembly, Alum. for x 19 Bt./Cap. Top $89 LPTVA18# Veneer Base Assembly, Alum. for x 18 Bt./Cap. Top $7717 LPTVA1# Veneer Base Assembly, Alum. for x 1 Bt./Cap. Top $83 LPTVA13# Veneer Base Assembly, Alum. for x 13 Bt./Cap. Top $888 LPTVA1# Veneer Base Assembly, Alum. for x 1 Bt./Cap. Top $857 LPTVA15# Veneer Base Assembly, Alum. for x 15 Bt./Cap. Top $88 LPTVA18# Veneer Base Assembly, Alum. for x 18 Bt./Cap. Top $915 LPTVA18# Veneer Base Assembly, Alum. for x 18 Bt./Cap. Top $935 LPTVA19# Veneer Base Assembly, Alum. for x 19 Bt./Cap. Top $9718 LPTLA# Lam. Base Assembly, Alum. for x Bt./Cap. Top $588 LPTLA1# Lam. Base Assembly, Alum. for x 1 Bt./Cap. Top $588 LPTLA8# Lam. Base Assembly, Alum. for x 8 Bt./Cap. Top $588 LPTLA# Lam. Base Assembly, Alum. for x Bt./Cap. Top $588 LPTVA# Veneer Base Assembly, Alum. for x Bt./Cap. Top $1,9 LPTVA1# Veneer Base Assembly, Alum. for x 1 Bt./Cap. Top $1,73 LPTVA8# Veneer Base Assembly, Alum. for x 8 Bt./Cap. Top $13,1 LPTVA# Veneer Base Assembly, Alum. for x Bt./Cap. Top $13,3

38 9 93 Foundation - Base Assemblies for 3/"D Rectangle Tops A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base is "W and 7.75 H. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > All Bases in Base Kit include 1 removable door and levelers. > Trough includes cable grippers for cable retention. > Trough includes removable bottom panel. > Braces are not required on tables with the Panel Base Kit. > Door kits for top access to trough are located on page 1. > 15 Oasis Power does not fit on 7 W table kits. 3 Oasis only fits on 9 W, 18 W, and 19 W kits. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Foundation Panel Base and Trough Assemblies for 3/"D Rectangle Tables LPULN37# Lam. Base Assembly for 3/ x 7 Rectangle Top $1719 LPULN38# Lam. Base Assembly for 3/ x 8 Rectangle Top $1719 LPULN39# Lam. Base Assembly for 3/ x 9 Rectangle Top $1719 LPULN318# Lam. Base Assembly for 3/ x 18 Rectangle Top $857 LPULN31# Lam. Base Assembly for 3/ x 1 Rectangle Top $857 LPULN313# Lam. Base Assembly for 3/ x 13 Rectangle Top $857 LPULN31# Lam. Base Assembly for 3/ x 1 Rectangle Top $857 LPULN315# Lam. Base Assembly for 3/ x 15 Rectangle Top $857 LPULN318# Lam. Base Assembly for 3/ x 18 Rectangle Top $857 LPULN318# Lam. Base Assembly for 3/ x 18 Rectangle Top $857 LPULN319# Lam. Base Assembly for 3/ x 19 Rectangle Top $857 COORDINATING See pages for coordinating Foundation furniture. Veneer Foundation Panel Base and Trough Assemblies for 3/"D Rectangle Tables LPUVN37# Veneer Base Assembly for 3/ x 7 Rectangle Top $5 LPUVN38# Veneer Base Assembly for 3/ x 8 Rectangle Top $757 LPUVN39# Veneer Base Assembly for 3/ x 9 Rectangle Top $5 LPUVN318# Veneer Base Assembly for 3/ x 18 Rectangle Top $7113 LPUVN31# Veneer Base Assembly for 3/ x 1 Rectangle Top $717 LPUVN313# Veneer Base Assembly for 3/ x 13 Rectangle Top $77 LPUVN31# Veneer Base Assembly for 3/ x 1 Rectangle Top $835 LPUVN315# Veneer Base Assembly for 3/ x 15 Rectangle Top $8339 LPUVN318# Veneer Base Assembly for 3/ x 18 Rectangle Top $853 LPUVN318# Veneer Base Assembly for 3/ x 18 Rectangle Top $8959 LPUVN319# Veneer Base Assembly for 3/ x 19 Rectangle Top $9 TABLES STEP - FOUNDATION LPULN3# Lam. Base Assembly for 3/ x Rectangle Top $3987 LPULN31# Lam. Base Assembly for 3/ x 1 Rectangle Top $3987 LPULN38# Lam. Base Assembly for 3/ x 8 Rectangle Top $3987 LPULN3# Lam. Base Assembly for 3/ x Rectangle Top $3987 LPUVN3# Veneer Base Assembly for 3/ x Rectangle Top $11,1 LPUVN31# Veneer Base Assembly for 3/ x 1 Rectangle Top $11,7 LPUVN38# Veneer Base Assembly for 3/ x 8 Rectangle Top $1,8 LPUVN3# Veneer Base Assembly for 3/ x Rectangle Top $1,387 Laminate Foundation Panel Base and Trough Assemblies with Aluminum Trim for 3/"D Rectangle Tables LPULA37# Lam. Base Assembly, Alum. for 3/ x 7 Rectangle Top $9 LPULA38# Lam. Base Assembly, Alum. for 3/ x 8 Rectangle Top $9 LPULA39# Lam. Base Assembly, Alum. for 3/ x 9 Rectangle Top $9 Veneer Foundation Panel Base and Trough Assemblies with Aluminum Trim for 3/"D Rectangle Tables LPUVA37# Veneer Base Assembly, Alum. for 3/ x 7 Rectangle Top $5 LPUVA38# Veneer Base Assembly, Alum. for 3/ x 8 Rectangle Top $87 LPUVA39# Veneer Base Assembly, Alum. for 3/ x 9 Rectangle Top $5131 LPULA318# Lam. Base Assembly, Alum. for 3/ x 18 Rectangle Top $89 LPULA31# Lam. Base Assembly, Alum. for 3/ x 1 Rectangle Top $89 LPULA313# Lam. Base Assembly, Alum. for 3/ x 13 Rectangle Top $89 LPULA31# Lam. Base Assembly, Alum. for 3/ x 1 Rectangle Top $89 LPULA315# Lam. Base Assembly, Alum. for 3/ x 15 Rectangle Top $89 LPULA318# Lam. Base Assembly, Alum. for 3/ x 18 Rectangle Top $89 LPULA318# Lam. Base Assembly, Alum. for 3/ x 18 Rectangle Top $89 LPULA319# Lam. Base Assembly, Alum. for 3/ x 19 Rectangle Top $89 LPUVA318# Veneer Base Assembly, Alum. for 3/ x 18 Rectangle Top $735 LPUVA31# Veneer Base Assembly, Alum. for 3/ x 1 Rectangle Top $7593 LPUVA313# Veneer Base Assembly, Alum. for 3/ x 13 Rectangle Top $7879 LPUVA31# Veneer Base Assembly, Alum. for 3/ x 1 Rectangle Top $811 LPUVA315# Veneer Base Assembly, Alum. for 3/ x 15 Rectangle Top $89 LPUVA318# Veneer Base Assembly, Alum. for 3/ x 18 Rectangle Top $8737 LPUVA318# Veneer Base Assembly, Alum. for 3/ x 18 Rectangle Top $9 LPUVA319# Veneer Base Assembly, Alum. for 3/ x 19 Rectangle Top $937 LPULA3# Lam. Base Assembly, Alum. for 3/ x Rectangle Top $588 LPULA31# Lam. Base Assembly, Alum. for 3/ x 1 Rectangle Top $588 LPULA38# Lam. Base Assembly, Alum. for 3/ x 8 Rectangle Top $588 LPULA3# Lam. Base Assembly, Alum. for 3/ x Rectangle Top $588 LPUVA3# Veneer Base Assembly, Alum. for 3/ x Rectangle Top $11, LPUVA31# Veneer Base Assembly, Alum. for 3/ x 1 Rectangle Top $11,91 LPUVA38# Veneer Base Assembly, Alum. for 3/ x 8 Rectangle Top $1, LPUVA3# Veneer Base Assembly, Alum. for 3/ x Rectangle Top $1,83

39 9 95 Foundation - Base Assemblies for 8"D Rectangle Tops A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base is "W and 7.75 H. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > All Bases in Base Kit include 1 removable door and levelers. > Trough includes cable grippers for cable retention. > Trough includes removable bottom panel. > Braces are not required on tables with the Panel Base Kit. > Door kits for top access to trough are located on page 1. > 15 Oasis Power does not fit on 7 W table kits. 3 Oasis only fits on 9 W, 18 W, and 19 W kits. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Foundation Panel Base and Trough Assemblies for 8"D Rectangle Tables LPULN87# Lam. Base Assembly for 8 x 7 Rectangle Top $1719 LPULN88# Lam. Base Assembly for 8 x 8 Rectangle Top $1719 LPULN89# Lam. Base Assembly for 8 x 9 Rectangle Top $1719 LPULN818# Lam. Base Assembly for 8 x 18 Rectangle Top $857 LPULN81# Lam. Base Assembly for 8 x 1 Rectangle Top $857 LPULN813# Lam. Base Assembly for 8 x 13 Rectangle Top $857 LPULN81# Lam. Base Assembly for 8 x 1 Rectangle Top $857 LPULN815# Lam. Base Assembly for 8 x 15 Rectangle Top $857 LPULN818# Lam. Base Assembly for 8 x 18 Rectangle Top $857 LPULN818# Lam. Base Assembly for 8 x 18 Rectangle Top $857 LPULN819# Lam. Base Assembly for 8 x 19 Rectangle Top $857 COORDINATING See pages for coordinating Foundation furniture. Veneer Foundation Panel Base and Trough Assemblies for 8"D Rectangle Tables LPUVN87# Veneer Base Assembly for 8 x 7 Rectangle Top $5 LPUVN88# Veneer Base Assembly for 8 x 8 Rectangle Top $757 LPUVN89# Veneer Base Assembly for 8 x 9 Rectangle Top $5 LPUVN818# Veneer Base Assembly for 8 x 18 Rectangle Top $7113 LPUVN81# Veneer Base Assembly for 8 x 1 Rectangle Top $717 LPUVN813# Veneer Base Assembly for 8 x 13 Rectangle Top $77 LPUVN81# Veneer Base Assembly for 8 x 1 Rectangle Top $835 LPUVN815# Veneer Base Assembly for 8 x 15 Rectangle Top $8339 LPUVN818# Veneer Base Assembly for 8 x 18 Rectangle Top $853 LPUVN818# Veneer Base Assembly for 8 x 18 Rectangle Top $8959 LPUVN819# Veneer Base Assembly for 8 x 19 Rectangle Top $9 TABLES STEP - FOUNDATION LPULN8# Lam. Base Assembly for 8 x Rectangle Top $3987 LPULN81# Lam. Base Assembly for 8 x 1 Rectangle Top $3987 LPULN88# Lam. Base Assembly for 8 x 8 Rectangle Top $3987 LPULN8# Lam. Base Assembly for 8 x Rectangle Top $3987 LPUVN8# Veneer Base Assembly for 8 x Rectangle Top $11,1 LPUVN81# Veneer Base Assembly for 8 x 1 Rectangle Top $11,7 LPUVN88# Veneer Base Assembly for 8 x 8 Rectangle Top $1,8 LPUVN8# Veneer Base Assembly for 8 x Rectangle Top $1,387 Laminate Foundation Panel Base and Trough Assemblies with Aluminum Trim for 8"D Rectangle Tables LPULA87# Lam. Base Assembly, Alum. for 8 x 7 Rectangle Top $9 LPULA88# Lam. Base Assembly, Alum. for 8 x 8 Rectangle Top $9 LPULA89# Lam. Base Assembly, Alum. for 8 x 9 Rectangle Top $9 Veneer Foundation Panel Base and Trough Assemblies with Aluminum Trim for 8"D Rectangle Tables LPUVA87# Veneer Base Assembly, Alum. for 8 x 7 Rectangle Top $5 LPUVA88# Veneer Base Assembly, Alum. for 8 x 8 Rectangle Top $87 LPUVA89# Veneer Base Assembly, Alum. for 8 x 9 Rectangle Top $5131 LPULA818# Lam. Base Assembly, Alum. for 8 x 18 Rectangle Top $89 LPULA81# Lam. Base Assembly, Alum. for 8 x 1 Rectangle Top $89 LPULA813# Lam. Base Assembly, Alum. for 8 x 13 Rectangle Top $89 LPULA81# Lam. Base Assembly, Alum. for 8 x 1 Rectangle Top $89 LPULA815# Lam. Base Assembly, Alum. for 8 x 15 Rectangle Top $89 LPULA818# Lam. Base Assembly, Alum. for 8 x 18 Rectangle Top $89 LPULA818# Lam. Base Assembly, Alum. for 8 x 18 Rectangle Top $89 LPULA819# Lam. Base Assembly, Alum. for 8 x 19 Rectangle Top $89 LPUVA818# Veneer Base Assembly, Alum. for 8 x 18 Rectangle Top $735 LPUVA81# Veneer Base Assembly, Alum. for 8 x 1 Rectangle Top $7593 LPUVA813# Veneer Base Assembly, Alum. for 8 x 13 Rectangle Top $7879 LPUVA81# Veneer Base Assembly, Alum. for 8 x 1 Rectangle Top $811 LPUVA815# Veneer Base Assembly, Alum. for 8 x 15 Rectangle Top $89 LPUVA818# Veneer Base Assembly, Alum. for 8 x 18 Rectangle Top $8737 LPUVA818# Veneer Base Assembly, Alum. for 8 x 18 Rectangle Top $9 LPUVA819# Veneer Base Assembly, Alum. for 8 x 19 Rectangle Top $937 LPULA8# Lam. Base Assembly, Alum. for 8 x Rectangle Top $588 LPULA81# Lam. Base Assembly, Alum. for 8 x 1 Rectangle Top $588 LPULA88# Lam. Base Assembly, Alum. for 8 x 8 Rectangle Top $588 LPULA8# Lam. Base Assembly, Alum. for 8 x Rectangle Top $588 LPUVA8# Veneer Base Assembly, Alum. for 8 x Rectangle Top $11, LPUVA81# Veneer Base Assembly, Alum. for 8 x 1 Rectangle Top $11,91 LPUVA88# Veneer Base Assembly, Alum. for 8 x 8 Rectangle Top $1, LPUVA8# Veneer Base Assembly, Alum. for 8 x Rectangle Top $1,83

40 9 97 Foundation - Base Assemblies for 5"D Rectangle Tops A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base is "W and 7.75 H. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > All Bases in Base Kit include 1 removable door and levelers. > Trough includes cable grippers for cable retention. > Trough includes removable bottom panel. > Braces are not required on tables with the Panel Base Kit. > Door kits for top access to trough are located on page 1. > 15 Oasis Power does not fit on 7 W table kits. 3 Oasis only fits on 9 W, 18 W, and 19 W kits. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Foundation Panel Base and Trough Assemblies for 5"D Rectangle Tables LPULN57# Lam. Base Assembly for 5 x 7 Rectangle Top $33 LPULN58# Lam. Base Assembly for 5 x 8 Rectangle Top $33 LPULN59# Lam. Base Assembly for 5 x 9 Rectangle Top $33 LPULN518# Lam. Base Assembly for 5 x 18 Rectangle Top $373 LPULN51# Lam. Base Assembly for 5 x 1 Rectangle Top $373 LPULN513# Lam. Base Assembly for 5 x 13 Rectangle Top $373 LPULN51# Lam. Base Assembly for 5 x 1 Rectangle Top $373 LPULN515# Lam. Base Assembly for 5 x 15 Rectangle Top $373 LPULN518# Lam. Base Assembly for 5 x 18 Rectangle Top $373 LPULN518# Lam. Base Assembly for 5 x 18 Rectangle Top $373 LPULN519# Lam. Base Assembly for 5 x 19 Rectangle Top $373 COORDINATING See pages for coordinating Foundation furniture. Veneer Foundation Panel Base and Trough Assemblies for 5"D Rectangle Tables LPUVN57# Veneer Base Assembly for 5 x 7 Rectangle Top $531 LPUVN58# Veneer Base Assembly for 5 x 8 Rectangle Top $599 LPUVN59# Veneer Base Assembly for 5 x 9 Rectangle Top $599 LPUVN518# Veneer Base Assembly for 5 x 18 Rectangle Top $8389 LPUVN51# Veneer Base Assembly for 5 x 1 Rectangle Top $89 LPUVN513# Veneer Base Assembly for 5 x 13 Rectangle Top $899 LPUVN51# Veneer Base Assembly for 5 x 1 Rectangle Top $9311 LPUVN515# Veneer Base Assembly for 5 x 15 Rectangle Top $915 LPUVN518# Veneer Base Assembly for 5 x 18 Rectangle Top $999 LPUVN518# Veneer Base Assembly for 5 x 18 Rectangle Top $1,3 LPUVN519# Veneer Base Assembly for 5 x 19 Rectangle Top $1,537 TABLES STEP - FOUNDATION LPULN5# Lam. Base Assembly for 5 x Rectangle Top $513 LPULN51# Lam. Base Assembly for 5 x 1 Rectangle Top $513 LPULN58# Lam. Base Assembly for 5 x 8 Rectangle Top $513 LPULN5# Lam. Base Assembly for 5 x Rectangle Top $513 LPUVN5# Veneer Base Assembly for 5 x Rectangle Top $13,15 LPUVN51# Veneer Base Assembly for 5 x 1 Rectangle Top $13,5 LPUVN58# Veneer Base Assembly for 5 x 8 Rectangle Top $13,77 LPUVN5# Veneer Base Assembly for 5 x Rectangle Top $1,75 Laminate Foundation Panel Base and Trough Assemblies with Aluminum Trim for 5"D Rectangle Tables LPULA57# Lam. Base Assembly, Alum. for 5 x 7 Rectangle Top $81 LPULA58# Lam. Base Assembly, Alum. for 5 x 8 Rectangle Top $81 LPULA59# Lam. Base Assembly, Alum. for 5 x 9 Rectangle Top $81 LPULA518# Lam. Base Assembly, Alum. for 5 x 18 Rectangle Top $58 LPULA51# Lam. Base Assembly, Alum. for 5 x 1 Rectangle Top $58 LPULA513# Lam. Base Assembly, Alum. for 5 x 13 Rectangle Top $58 LPULA51# Lam. Base Assembly, Alum. for 5 x 1 Rectangle Top $58 LPULA515# Lam. Base Assembly, Alum. for 5 x 15 Rectangle Top $58 LPULA518# Lam. Base Assembly, Alum. for 5 x 18 Rectangle Top $58 LPULA518# Lam. Base Assembly, Alum. for 5 x 18 Rectangle Top $58 LPULA519# Lam. Base Assembly, Alum. for 5 x 19 Rectangle Top $58 LPULA5# Lam. Base Assembly, Alum. for 5 x Rectangle Top $39 LPULA51# Lam. Base Assembly, Alum. for 5 x 1 Rectangle Top $39 LPULA58# Lam. Base Assembly, Alum. for 5 x 8 Rectangle Top $39 LPULA5# Lam. Base Assembly, Alum. for 5 x Rectangle Top $39 Veneer Foundation Panel Base and Trough Assemblies with Aluminum Trim for 5"D Rectangle Tables LPUVA57# Veneer Base Assembly, Alum. for 5 x 7 Rectangle Top $519 LPUVA58# Veneer Base Assembly, Alum. for 5 x 8 Rectangle Top $57 LPUVA59# Veneer Base Assembly, Alum. for 5 x 9 Rectangle Top $5993 LPUVA518# Veneer Base Assembly, Alum. for 5 x 18 Rectangle Top $8577 LPUVA51# Veneer Base Assembly, Alum. for 5 x 1 Rectangle Top $883 LPUVA513# Veneer Base Assembly, Alum. for 5 x 13 Rectangle Top $919 LPUVA51# Veneer Base Assembly, Alum. for 5 x 1 Rectangle Top $93 LPUVA515# Veneer Base Assembly, Alum. for 5 x 15 Rectangle Top $97 LPUVA518# Veneer Base Assembly, Alum. for 5 x 18 Rectangle Top $1,9 LPUVA518# Veneer Base Assembly, Alum. for 5 x 18 Rectangle Top $1,95 LPUVA519# Veneer Base Assembly, Alum. for 5 x 19 Rectangle Top $1,58 LPUVA5# Veneer Base Assembly, Alum. for 5 x Rectangle Top $13,39 LPUVA51# Veneer Base Assembly, Alum. for 5 x 1 Rectangle Top $13,59 LPUVA58# Veneer Base Assembly, Alum. for 5 x 8 Rectangle Top $13,881 LPUVA5# Veneer Base Assembly, Alum. for 5 x Rectangle Top $1,1

41 98 99 Foundation - Base Assemblies for "D Rectangle Tops A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base is "W and 7.75 H. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > All Bases in Base Kit include 1 removable door and levelers. > Trough includes cable grippers for cable retention. > Trough includes removable bottom panel. > Braces are not required on tables with the Panel Base Kit. > Door kits for top access to trough are located on page 1. > 15 Oasis Power does not fit on 7 W table kits. 3 Oasis only fits on 9 W, 18 W, and 19 W kits. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Foundation Panel Base and Trough Assemblies for "D Rectangle Tables LPULN7# Lam. Base Assembly for x 7 Rectangle Top $33 LPULN8# Lam. Base Assembly for x 8 Rectangle Top $33 LPULN9# Lam. Base Assembly for x 9 Rectangle Top $33 LPULN18# Lam. Base Assembly for x 18 Rectangle Top $373 LPULN1# Lam. Base Assembly for x 1 Rectangle Top $373 LPULN13# Lam. Base Assembly for x 13 Rectangle Top $373 LPULN1# Lam. Base Assembly for x 1 Rectangle Top $373 LPULN15# Lam. Base Assembly for x 15 Rectangle Top $373 LPULN18# Lam. Base Assembly for x 18 Rectangle Top $373 LPULN18# Lam. Base Assembly for x 18 Rectangle Top $373 LPULN19# Lam. Base Assembly for x 19 Rectangle Top $373 COORDINATING See pages for coordinating Foundation furniture. Veneer Foundation Panel Base and Trough Assemblies for "D Rectangle Tables LPUVN7# Veneer Base Assembly for x 7 Rectangle Top $531 LPUVN8# Veneer Base Assembly for x 8 Rectangle Top $519 LPUVN9# Veneer Base Assembly for x 9 Rectangle Top $599 LPUVN18# Veneer Base Assembly for x 18 Rectangle Top $8389 LPUVN1# Veneer Base Assembly for x 1 Rectangle Top $89 LPUVN13# Veneer Base Assembly for x 13 Rectangle Top $899 LPUVN1# Veneer Base Assembly for x 1 Rectangle Top $9311 LPUVN15# Veneer Base Assembly for x 15 Rectangle Top $915 LPUVN18# Veneer Base Assembly for x 18 Rectangle Top $999 LPUVN18# Veneer Base Assembly for x 18 Rectangle Top $1,3 LPUVN19# Veneer Base Assembly for x 19 Rectangle Top $1,537 TABLES STEP - FOUNDATION LPULN# Lam. Base Assembly for x Rectangle Top $513 LPULN1# Lam. Base Assembly for x 1 Rectangle Top $513 LPULN8# Lam. Base Assembly for x 8 Rectangle Top $513 LPULN# Lam. Base Assembly for x Rectangle Top $513 LPUVN# Veneer Base Assembly for x Rectangle Top $13,15 LPUVN1# Veneer Base Assembly for x 1 Rectangle Top $13,5 LPUVN8# Veneer Base Assembly for x 8 Rectangle Top $13,77 LPUVN# Veneer Base Assembly for x Rectangle Top $1,75 Laminate Foundation Panel Base and Trough Assemblies with Aluminum Trim for "D Rectangle Tables LPULA7# Lam. Base Assembly, Alum. for x 7 Rectangle Top $81 LPULA8# Lam. Base Assembly, Alum. for x 8 Rectangle Top $81 LPULA9# Lam. Base Assembly, Alum. for x 9 Rectangle Top $81 Veneer Foundation Panel Base and Trough Assemblies with Aluminum Trim for "D Rectangle Tables LPUVA7# Veneer Base Assembly, Alum. for x 7 Rectangle Top $519 LPUVA8# Veneer Base Assembly, Alum. for x 8 Rectangle Top $57 LPUVA9# Veneer Base Assembly, Alum. for x 9 Rectangle Top $5993 LPULA18# Lam. Base Assembly, Alum. for x 18 Rectangle Top $58 LPULA1# Lam. Base Assembly, Alum. for x 1 Rectangle Top $58 LPULA13# Lam. Base Assembly, Alum. for x 13 Rectangle Top $58 LPULA1# Lam. Base Assembly, Alum. for x 1 Rectangle Top $58 LPULA15# Lam. Base Assembly, Alum. for x 15 Rectangle Top $58 LPULA18# Lam. Base Assembly, Alum. for x 18 Rectangle Top $58 LPULA18# Lam. Base Assembly, Alum. for x 18 Rectangle Top $58 LPULA19# Lam. Base Assembly, Alum. for x 19 Rectangle Top $58 LPUVA18# Veneer Base Assembly, Alum. for x 18 Rectangle Top $8577 LPUVA1# Veneer Base Assembly, Alum. for x 1 Rectangle Top $883 LPUVA13# Veneer Base Assembly, Alum. for x 13 Rectangle Top $919 LPUVA1# Veneer Base Assembly, Alum. for x 1 Rectangle Top $93 LPUVA15# Veneer Base Assembly, Alum. for x 15 Rectangle Top $97 LPUVA18# Veneer Base Assembly, Alum. for x 18 Rectangle Top $1,9 LPUVA18# Veneer Base Assembly, Alum. for x 18 Rectangle Top $1,95 LPUVA19# Veneer Base Assembly, Alum. for x 19 Rectangle Top $1,58 LPULA# Lam. Base Assembly, Alum. for x Rectangle Top $39 LPULA1# Lam. Base Assembly, Alum. for x 1 Rectangle Top $39 LPULA8# Lam. Base Assembly, Alum. for x 8 Rectangle Top $39 LPULA# Lam. Base Assembly, Alum. for x Rectangle Top $39 LPUVA# Veneer Base Assembly, Alum. for x Rectangle Top $13,39 LPUVA1# Veneer Base Assembly, Alum. for x 1 Rectangle Top $13,59 LPUVA8# Veneer Base Assembly, Alum. for x 8 Rectangle Top $13,881 LPUVA# Veneer Base Assembly, Alum. for x Rectangle Top $1,1

42 1 11 Foundation Trough Top-Access Door Kits Foundation Trough Power Kits - Laminate Door Kits A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +1% (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, +19% 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. - Veneer Door Kits (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Individual doors are 5.5 x. > Interior dimension of trough is 1.5 D x 7.5 H. Interior dimension of trough with aluminum trim is 1.5 D x 7 H. > Door kits require that the door kit cut-out is selected when ordering the table top. > Field installed. > Door is hinged and lays flat on tabletop when open. When closed there is a 1 gap for cord access. > Infeeds for Foundation Trough Power Kits are ordered separately. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Door Kits for Foundation Tables with Trough LPTDL# Laminate Door Kit for 7 W Table (includes doors) $37 LPTDL# Laminate Door Kit for 8, 9, or 18 W Table (includes doors) $75 LPTDL# Laminate Door Kit for 1 or 13 W Table (includes doors) $1131 LPTD8L# Laminate Door Kit for 1 or 15 W Table (includes 8 doors) $151 LPTL# Laminate Door Kit for 18 or 18 W Table (includes 1 doors) $188 LPTL# Laminate Door Kit for 19 or W Table (includes 1 doors) $ LPTL# Laminate Door Kit for 1 or 8 W Table (includes 1 doors) $ LPTL# Laminate Door Kit for W Table (includes 1 doors) $319 Veneer Door Kits for Foundation Tables with Trough LPTDV# Veneer Door Kit for 7 W Table (includes doors) $77 LPTDV# Veneer Door Kit for 8, 9, or 18 W Table (includes doors) $158 LPTDV# Veneer Door Kit for 1 or 13 W Table (includes doors) $33 LPTD8V# Veneer Door Kit for 1 or 15 W Table (includes 8 doors) $397 LPTV# Veneer Door Kit for 18 or 18 W Table (includes 1 doors) $3873 LPTV# Veneer Door Kit for 19 or W Table (includes 1 doors) $8 LPTV# Veneer Door Kit for 1 or 8 W Table (includes 1 doors) $5 LPTV# Veneer Door Kit for W Table (includes 1 doors) $198 Aluminum Door Kits for Foundation Tables with Trough LPTDAL Aluminum Door Kit for 7 W Table (includes doors) $37 LPTDAL Aluminum Door Kit for 8, 9, or 18 W Table (includes doors) $75 LPTDAL Aluminum Door Kit for 1 or 13 W Table (includes doors) $1131 LPTD8AL Aluminum Door Kit for 1 or 15 W Table (includes 8 doors) $151 LPTAL Aluminum Door Kit for 18 or 18 W Table (includes 1 doors) $188 LPTAL Aluminum Door Kit for 19 or W Table (includes 1 doors) $ LPTAL Aluminum Door Kit for 1 or 8 W Table (includes 1 doors) $ LPTAL Aluminum Door Kit for W Table (includes 1 doors) $319 Power Kits for Foundation Tables with Trough LPTDPWR Power Kit for 7 table (includes 3 receptacles and 1 telecom plate opening) $55 LPTD3PWR Power Kit for 8 table (includes receptacles and telecom plate openings) $15 LPTDPWR Power Kit for 9 table (includes receptacles and 3 telecom plate openings) $15 LPTD5PWR Power Kit for 18 table (includes receptacles and telecom plate openings) $1911 LPTDPWR Power Kit for 1 or 13 table (includes 1 receptacles and telecom plate openings) $1911 LPTD8PWR Power Kit for 1 or 15 table (includes 1 receptacles and telecom plate openings) $ LPTPWR Power Kit for 18 or 18 table (includes 18 receptacles and telecom plate openings) $33 LPTPWR Power Kit for 19 table (includes receptacles and 8 telecom plate openings) $3 LPTPWR Power Kit for table (includes 18 receptacles and 9 telecom plate openings) $89 LPTPWR Power Kit for 1, 8 or table (includes 7 receptacles and 9 telecom plate openings) $5 Tip: Half of Power Kit is circuit 1 and half is circuit. Jumpers included. Tip: Power kit is.5 H x 5 W. Tip: Infeed ordered separately, below. Tip: Telecom plates ordered separately. See page 17. Base Power-Ins LPTD7 Infeed for Foundation Trough Power Kit, 7, hardwired $73 LPT Infeed for Foundation Trough Power Kit, 1, hardwired $35 Tip: Includes 3-way splitter and extra jumper. Used when power infeed comes in through center base location. TABLES STEP - FOUNDATION

43 1 13 Foundation Panel and Drum Individual Bases A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Base height is 7.75 > Bases include Levelers. > Top and bottom of base are open for cable management. Panel Bases have a cable management cutout on both sides at the top. > Boat Tables require smaller (less deep) bases on ends than middle. See page for recommendations. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number List Price (US$) Laminate Foundation Conference Table Panel Bases 18 LPB18# Lam. Base, 18 x, for 3/ D table $ LPB118# Lam. Base, 18 x 1, for 3/ D table $5 LPB# Lam. Base, x, for 8 D table $5 1 LPB1# Lam. Base, x 1, for 8 D table $58 3 LPB3# Lam. Base, 3 x, for 5 D table $ LPB13# Lam. Base, 3 x 1, for 5 D table $73 3 LPB3# Lam. Base, 3 x, for D table $ LPB13# Lam. Base, 3 x 1, for D table $88 Laminate Foundation Conference Table Panel Bases with Access Door 18 LPBD18# Lam. Base w/ Access Door, 18 x, for 3/ D table $ LPB18# Lam. Base w/ Access Door, 18 x 1, for 3/ D table $83 LPBD# Lam. Base w/ Access Door, x, for 8 D table $7 1 LPB# Lam. Base w/ Access Door, x 1, for 8 D table $85 3 LPBD3# Lam. Base w/ Access Door, 3 x, for 5 D table $ LPB3# Lam. Base w/ Access Door, 3 x 1, for 5 D table $11 3 LPBD3# Lam. Base w/ Access Door, 3 x, for D table $ LPB3# Lam. Base w/ Access Door, 3 x 1, for D table $13 COORDINATING See pages for coordinating Foundation furniture. Part Number List Price (US$) Veneer Foundation Conference Table Panel Bases 18 LVPB18# Veneer Base, 18 x, for 3/ D table $ LVPB118# Veneer Base, 18 x 1, for 3/ D table $1 LVPB# Veneer Base, x, for 8 D table $11 1 LVPB1# Veneer Base, x 1, for 8 D table $157 3 LVPB3# Veneer Base, 3 x, for 5 D table $ LVPB13# Veneer Base, 3 x 1, for 5 D table $ LVPB3# Veneer Base, 3 x, for D table $ LVPB13# Veneer Base, 3 x 1, for D table $198 Veneer Foundation Conference Table Panel Bases with Access Door 18 LVPBD18# Veneer Base w/ Access Door, 18 x, for 3/ D table $ LVPB18# Veneer Base w/ Access Door, 18 x 1, for 3/ D table $1519 LVPBD# Veneer Base w/ Access Door, x, for 8 D table $11 1 LVPB# Veneer Base w/ Access Door, x 1, for 8 D table $17 3 LVPBD3# Veneer Base w/ Access Door, 3 x, for 5 D table $ LVPB3# Veneer Base w/ Access Door, 3 x 1, for 5 D table $7 3 LVPBD3# Veneer Base w/ Access Door, 3 x, for D table $ LVPB3# Veneer Base w/ Access Door, 3 x 1, for D table $7 TABLES STEP - FOUNDATION Laminate Foundation Conference Table Panel Bases with Aluminum Trim 18 LPBA18# Lam. Base w/ Alum. Trim, 18 x, for 3/ D table $ LPBA118# Lam. Base w/ Alum. Trim, 18 x 1, for 3/ D table $738 LPBA# Lam. Base w/ Alum. Trim, x, for 8 D table $78 1 LPBA1# Lam. Base w/ Alum. Trim, x 1, for 8 D table $75 3 LPBA3# Lam. Base w/ Alum. Trim, 3 x, for 5 D table $9 3 1 LPBA13# Lam. Base w/ Alum. Trim, 3 x 1, for 5 D table $957 3 LPBA3# Lam. Base w/ Alum. Trim, 3 x, for D table $ LPBA13# Lam. Base w/ Alum. Trim, 3 x 1, for D table $978 Veneer Foundation Conference Table Panel Bases with Aluminum Trim 18 LVPBA18# Veneer Base w/ Alum. Trim, 18 x, for 3/ D table $ LVPBA118# Veneer Base w/ Alum. Trim, 18 x 1, for 3/ D table $15 LVPBA# Veneer Base w/ Alum. Trim, x, for 8 D table $153 1 LVPBA1# Veneer Base w/ Alum. Trim, x 1, for 8 D table $171 3 LVPBA3# Veneer Base w/ Alum. Trim, 3 x, for 5 D table $ LVPBA13# Veneer Base w/ Alum. Trim, 3 x 1, for 5 D table $19 3 LVPBA3# Veneer Base w/ Alum. Trim, 3 x, for D table $ LVPBA13# Veneer Base w/ Alum. Trim, 3 x 1, for D table $13 Laminate Foundation Conference Table Panel Bases with Aluminum Trim and Access Door 18 LPBAD18# Lam. Base w/ Al. Trim, Access Door, 18 x, for 3/ D table $ LPBA18# Lam. Base w/ Al. Trim, Access Door, 18 x 1, for 3/ D table $87 LPBAD# Lam. Base w/ Al. Trim, Access Door, x, for 8 D table $8 1 LPBA# Lam. Base w/ Al. Trim, Access Door, x 1, for 8 D table $9 3 LPBAD3# Lam. Base w/ Al. Trim, Access Door, 3 x, for 5 D table $ LPBA3# Lam. Base w/ Al. Trim, Access Door, 3 x 1, for 5 D table $111 3 LPBAD3# Lam. Base w/ Al. Trim, Access Door, 3 x, for D table $ LPBA3# Lam. Base w/ Al. Trim, Access Door, 3 x 1, for D table $115 Tip: Boat Tables require smaller (less deep) bases on ends than middle. See page for recommendations. Veneer Foundation Conference Table Panel Bases with Aluminum Trim and Access Door 18 LVPBAD18# Veneer Base w/ Alum. Trim, Access Door, 18 x, for 3/ D table $ LVPBA18# Veneer Base w/ Alum. Trim, Access Door, 18 x 1, for 3/ D table $13 LVPBAD# Veneer Base w/ Alum. Trim, Access Door, x, for 8 D table $ LVPBA# Veneer Base w/ Alum. Trim, Access Door, x 1, for 8 D table $189 3 LVPBAD3# Veneer Base w/ Alum. Trim, Access Door, 3 x, for 5 D table $ LVPBA3# Veneer Base w/ Alum. Trim, Access Door, 3 x 1, for 5 D table $13 3 LVPBAD3# Veneer Base w/ Alum. Trim, Access Door, 3 x, for D table $8 3 1 LVPBA3# Veneer Base w/ Alum. Trim, Access Door, 3 x 1, for D table $37 Tip: Boat Tables require smaller (less deep) bases on ends than middle. See page for recommendations. Laminate Foundation Conference Table Drum Base - LLDR# Lam. Base, diameter, for 8 D table $1 - LLDR# Lam. Base, diameter, for D table $197 Tip: Ballast weight included. Tip: Top and bottom (not sides) of bases are open for cable management. Veneer Foundation Conference Table Drum Base LLVDR# Veneer Base, diameter, for 8 D table $1 LLVDR# Veneer Base, diameter, for D table $3 Tip: Ballast weight included. Tip: Top and bottom (not sides) of bases are open for cable management. Laminate Foundation Conference Table Drum Base with Access Door - LLDRB# Lam. Base w/ Access Door, diameter, for 8 D table $9 - LLDRB# Lam. Base w/ Access Door, diameter, for D table $35 Tip: Ballast weight included. Veneer Foundation Conference Table Drum Base with Access Door LLVDRB# Veneer Base w/ Access Door, diameter, for 8 D table $737 LLVDRB# Veneer Base w/ Access Door, diameter, for D table $95 Tip: Ballast weight included.

44 1 15 Gyration. Flip Bases (^) Leg Finishes List: A Silver with Black Caster B Silver with White Caster +$ W Alternative color with Black Caster +$ X Alternative color with White Caster +$1 Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Tubular and angled leg Blade tables nest in-line. Straight leg Blade tables nest off-set. Nested, both leg styles have 7-1/ between front of one table to front of the next table. > Angled foot depth is approximately 13 for 18 D tables, 19 for D tables, and.5 for 3 D tables. Straight foot depth is approximately 13.5 for 18 D tables, 19.5 for D tables, and 5.5 for 3 D tables. > Gyration bases do not allow for cable management holes. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Gyration. Flip (No Beam) Base on Casters - Blade (Straight) Legs, Package of Two LGNB18^ 18 D Flip Base, Blade (Straight) Legs $118 LGNB^ D Flip Base, Blade (Straight) Legs $119 LGNB3^ 3 D Flip Base, Blade (Straight) Legs $13 Tip: Cannot use no beam bases on tops larger than 7 W. Gyration. Flip Base Assembly with Beam - 18"D Blade (Straight) Legs (qty ) - on casters LGYB188^ 18 D Flip Base with Beam, Blade (Straight) Legs for 8 W table $1357 LGYB18^ 18 D Flip Base with Beam, Blade (Straight) Legs for W table $1378 LGYB187^ 18 D Flip Base with Beam, Blade (Straight) Legs for 7 W table $118 LGYB189^ 18 D Flip Base with Beam, Blade (Straight) Legs for 9 W table $159 Gyration. Flip Base Assembly with Beam - "D Blade (Straight) Legs (qty ) - on casters LGYB8^ D Flip Base with Beam, Blade (Straight) Legs for 8 W table $137 LGYB^ D Flip Base with Beam, Blade (Straight) Legs for W table $1389 LGYB7^ D Flip Base with Beam, Blade (Straight) Legs for 7 W table $19 LGYB9^ D Flip Base with Beam, Blade (Straight) Legs for 9 W table $15 Gyration. Flip Base Assembly with Beam - 3"D Blade (Straight) Legs (qty ) - on casters LGYB38^ 3 D Flip Base with Beam, Blade (Straight) Legs for 8 W table $1 LGYB3^ 3 D Flip Base with Beam, Blade (Straight) Legs for W table $15 LGYB37^ 3 D Flip Base with Beam, Blade (Straight) Legs for 7 W table $18 LGYB39^ 3 D Flip Base with Beam, Blade (Straight) Legs for 9 W table $1557 TABLES STEP - GYRATION. Gyration. Flip (No Beam) Base on Casters - Blade (Angled) Legs, Package of Two LGNJ^ D Flip Base, Blade (Angled) Legs $17 LGNJ3^ 3 D Flip Base, Blade (Angled) Legs $13 Tip: Cannot use no beam bases on tops larger than 7 W. Gyration. Flip Base Assembly with Beam - "D Blade (Angled) Legs (qty ) - on casters LGYJ^ D Flip Base with Beam, Blade (Angled) Legs for W table $19 LGYJ7^ D Flip Base with Beam, Blade (Angled) Legs for 7 W table $19 Gyration. Flip Base Assembly with Beam - 3"D Blade (Angled) Legs (qty ) - on casters LGYJ3^ 3 D Flip Base with Beam, Blade (Angled) Legs for W table $185 LGYJ37^ 3 D Flip Base with Beam, Blade (Angled) Legs for 7 W table $157 Gyration. Flip (No Beam) Base on Casters - Tubular Legs, Package of Two LGNT18^ 18 D Flip Base, Tubular Legs $19 LGNT^ D Flip Base, Tubular Legs $1 LGNT3^ 3 D Flip Base, Tubular Legs $138 Tip: Cannot use no beam bases on tops larger than 7 W. Gyration. Flip Base Assembly with Beam - 18"D Tubular Legs (qty ) - on casters LGYT188^ 18 D Flip Base with Beam, Tubular Legs for 8 W table $117 LGYT18^ 18 D Flip Base with Beam, Tubular Legs for W table $1193 LGYT187^ 18 D Flip Base with Beam, Tubular Legs for 7 W table $13 LGYT189^ 18 D Flip Base with Beam, Tubular Legs for 9 W table $1317 Gyration. Flip Base Assembly with Beam - "D Tubular Legs (qty ) - on casters LGYT8^ D Flip Base with Beam, Tubular Legs for 8 W table $113 LGYT^ D Flip Base with Beam, Tubular Legs for W table $13 LGYT7^ D Flip Base with Beam, Tubular Legs for 7 W table $171 LGYT9^ D Flip Base with Beam, Tubular Legs for 9 W table $1355 Gyration. Flip Base Assembly with Beam - 3"D Tubular Legs (qty ) - on casters LGYT38^ 3 D Flip Base with Beam, Tubular Legs for 8 W table $15 LGYT3^ 3 D Flip Base with Beam, Tubular Legs for W table $17 LGYT37^ 3 D Flip Base with Beam, Tubular Legs for 7 W table $133 LGYT39^ 3 D Flip Base with Beam, Tubular Legs for 9 W table $13 Gyration. Flip Base Assembly with Beam - 3"D Tubular Legs (qty ) - on casters LGYT38^ 3 D Flip Base with Beam, Tubular Legs for 8 W table $131 LGYT3^ 3 D Flip Base with Beam, Tubular Legs for W table $139 LGYT37^ 3 D Flip Base with Beam, Tubular Legs for 7 W table $138

45 1 17 Impression T-Legs Impression T-Leg Flip Tables (Complete Table) (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP - Legs w/ Casters Only (@) Caster Color Suffix List: B Black G Grey +$ STEP 3 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $5 list. For taller, put XX in front and add $8 list. Maximum worksurface height is " > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part No. Description List Price (US$) Impression T-Legs with Levelers, package of two LTP18?^ T-Legs, levelers, for 18 D table (1 spread) $558 LTP?^ T-Legs, levelers, for D table ( spread) $57 LTP3?^ T-Legs, levelers, for 3-3 D table ( spread) $ Impression T-Legs on Casters, package of two LTPC18?@^ T-Legs, casters, for 18 D table (1 spread) $3 LTPC?@^ T-Legs, casters, for D table ( spread) $ LTPC3?@^ T-Legs, casters, for 3-3 D table ( spread) $89 Impression T-Leg Folding with Levelers, package of two LTPF18^ T-Legs Folding, levelers, for 18 D table (1 spread) $958 LTPF^ T-Legs Folding, levelers, for D table ( spread) $97 LTPF3^ T-Legs Folding, levelers, for 3-3 D table ( spread) $973 Tip: Designed for tables wide and wider. designteam@enwork.com for other options. Impression T-Leg Folding with Casters, package of two LTPFC18^@ T-Legs Folding, casters, for 18 D table (1 spread) $98 LTPFC^@ T-Legs Folding, casters, for D table ( spread) $98 LTPFC3^@ T-Legs Folding, casters, for 3-3 D table ( spread) $993 Tip: Designed for tables wide and wider. designteam@enwork.com for other options. Leg Cable Management Covers LPCM^ Cable Management Cover for Leg with Leveler $57 LPCMC^ Cable Management Cover for Leg with Caster $57 LPCMA^ Cable Management Cover for Flip Table with Casters $57 Tip: Not applicable to Set Screw Adjustable legs. > Angled leg tables nest in-line. Straight leg tables nest off-set. Nested, both leg styles have 7-1/ between front of one table to front of the next table. > Angled foot depth is approximately 1 for 18 D tables, 1.75 for D tables, and 5.5 for 3 D tables. Straight foot depth is approximately 1 for 18 D tables, for D tables, and for 3 D tables. > As of May 18, the Impression flip mechanism has changed. > Angled legs nest in-line. Straight legs nest off-set. > Products on this page have been updated. If trying to match Impression T-Leg Flip bases ordered between 8 and 15, contact designteam@enwork.com. > Flip tables include Top with 3mm edge or knife edge on user side. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. 3mm Edge Laminate worksurface on Impression T-Leg (straight) Flip Base, 18 D LFRS188A^?@*# 18 D Impression Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $151 LFRS18A^?@*# 18 D Impression Straight T-Leg Flip Table W Top w/ 3mm Edge $155 LFRS187A^?@*# 18 D Impression Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $1737 LFRS189A^?@*# 18 D Impression Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $7 3mm Edge Laminate worksurface on Impression T-Leg (straight) Flip Base, D LFRS8A^?@*# D Impression Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $155 LFRSA^?@*# D Impression Straight T-Leg Flip Table W Top w/ 3mm Edge $19 LFRS7A^?@*# D Impression Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $1778 LFRS9A^?@*# D Impression Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $119 3mm Edge Laminate worksurface on Impression T-Leg (straight) Flip Base, 3 D LFRS38A^?@*# 3 D Impression Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $18 LFRS3A^?@*# 3 D Impression Straight T-Leg Flip Table W Top w/ 3mm Edge $1798 LFRS37A^?@*# 3 D Impression Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $19 LFRS39A^?@*# 3 D Impression Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $89 3mm Edge Laminate worksurface on Impression T-Leg (angled) Flip Base LFRAA^?@*# D Impression Angled T-Leg Flip Table W Top w/ 3mm Edge $1753 LFRA7A^?@*# D Impression Angled T-Leg Flip Table 7 W Top w/ 3mm Edge $183 LFRA3A^?@*# 3 D Impression Angled T-Leg Flip Table W Top w/ 3mm Edge $185 LFRA37A^?@*# 3 D Impression Angled T-Leg Flip Table 7 W Top w/ 3mm Edge $191 Knife Edge (user side) Laminate worksurface on Impression T-Leg (straight) Flip Base, 18 D LFRS188K^?@*# 18 D Impression Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $1 LFRS18K^?@*# 18 D Impression Straight T-Leg Flip Table W Top w/ Knife Edge User Side $1783 LFRS187K^?@*# 18 D Impression Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $1879 LFRS189K^?@*# 18 D Impression Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $1 Knife Edge (user side)laminate worksurface on Impression T-Leg (straight) Flip Base, D LFRS8K^?@*# D Impression Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $1 LFRSK^?@*# D Impression Straight T-Leg Flip Table W Top w/ Knife Edge User Side $183 LFRS7K^?@*# D Impression Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $191 LFRS9K^?@*# D Impression Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $35 Knife Edge (user side) Laminate worksurface on Impression T-Leg (straight) Flip Base, 3 D LFRS38K^?@*# 3 D Impression Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $178 LFRS3K^?@*# 3 D Impression Straight T-Leg Flip Table W Top w/ Knife Edge User Side $197 LFRS37K^?@*# 3 D Impression Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $7 LFRS39K^?@*# 3 D Impression Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $99 Knife Edge (user side) Laminate worksurface on Impression T-Leg (angled) Flip Base LFRAK^?@*# D Impression Angled T-Leg Flip Table W Top w/ Knife Edge User Side $188 LFRA7K^?@*# D Impression Angled T-Leg Flip Table 7 W Top w/ Knife Edge User Side $1979 LFRA3K^?@*# 3 D Impression Angled T-Leg Flip Table W Top w/ Knife Edge User Side $5 LFRA37K^?@*# 3 D Impression Angled T-Leg Flip Table 7 W Top w/ Knife Edge User Side $17 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP (?) Routing Hole Suffix List: N No routing hole in one leg Y Routing hole in one leg +$ Z Routing hole in two legs +$1 STEP 3 (@) Caster Color Suffix List: B Black G Grey +$ STEP (*) Cable Management Suffix List: N No Cable Management G Grommet (one, center rear) +$18 U Power/Data cut-out +$3 (one, center rear) X Other TBD STEP 5 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium +$3 laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard +$5 (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$7 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. TABLES STEP - IMPRESSION

46 18 19 Impression TT-Legs - Conference (?) Routing Holes Suffix List N No routing holes in column Y Routing hole in one column +$ Z Routing holes in two columns +$1 STEP (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part COORDINATING number and add $5 list. For taller, put XX in front and add $8 list. See pages Non-standard heights not available on height-adjustable legs. Maximum for coordinating worksurface height is ". Impression furniture. > Installation hardware is included. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Impression TT-Leg with Levelers, package of one LTP8?^ TT-Leg, levelers for D and 8 D table (3 spread) $9 LTP?^ TT-Leg, levelers for D table (" spread) $73 Tip: The 8 leg top plates are apart and therefore cannot receive power/data units between them. TABLES STEP - IMPRESSION STEP 3 - TT-Leg Filler Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +$ Y *Formica Non-Premium (includes 58, 3, +$9 MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. Impression TT-Leg with Levelers and Laminate Filler, package of one LTPL8?^# TT-Leg, levelers, laminate filler, for D and 8 D table (3" spread) $85 LTPL?^# TT-Leg, levelers, laminate filler, for D table (" spread) $85 Tip: A center power/data location on a -piece table is not possible due to interference with the laminate filler panel on the leg (a leg is typically shared at the seam of the pieces). Tip: TT-Leg with filler cannot accept the cable management cover. Impression TT-Leg with Levelers and Veneer Filler, package of one LTPV8?^# TT-Leg, levelers, veneer filler, for D and 8 D table (3" spread) $997 LTPV?^# TT-Leg, levelers, veneer filler, for D table (" spread) $139 Tip: A center power/data location on a -piece table is not possible due to interference with the veneer filler panel on the leg (a leg is typically shared at the seam of the pieces). Tip: TT-Leg with filler cannot accept the cable management cover. Notes (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee)

47 Impression C-Legs (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP - Legs w/ Casters Only (@) Caster Color Suffix List: B Black G Grey +$ STEP 3 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $5 list. For taller, put XX in front and add $8 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > Installation hardware is included. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Impression C-Leg with Levelers, package of two LCP18?^ C-Leg, levelers, for 18 D table (1 spread) $558 LCP?^ C-Leg, levelers, for D table ( spread) $57 LCP3?^ C-Leg, levelers, for 3 D table ( spread) $ Impression C-Leg with Casters, package of two LCPC18?@^ C-Leg, casters, for 18 D table (1 spread) $3 LCPC?@^ C-Leg, casters, for D table ( spread) $ LCPC3?@^ C-Leg, casters, for 3 D table ( spread) $89 Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and levelers for 18"D tables LACP188?^ Set-Screw C-Leg base with Beam, levelers, for 18 D x 8 W top $95 LACP18?^ Set-Screw C-Leg base with Beam, levelers, for 18 D x W top $95 LACP187?^ Set-Screw C-Leg base with Beam, levelers, for 18 D x 7 W top $95 Tip: Height range is 9-3 with 1.5 increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and levelers for "D tables LACP8?^ Set-Screw C-Leg base with Beam, levelers, for D x 8 W top $978 LACP?^ Set-Screw C-Leg base with Beam, levelers, for D x W top $978 LACP7?^ Set-Screw C-Leg base with Beam, levelers, for D x 7 W top $978 Tip: Height range is 9-3 with 1.5 increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and levelers for 3"D tables LACP38?^ Set-Screw C-Leg base with Beam, levelers, for 3 D x 8 W top $18 LACP3?^ Set-Screw C-Leg base with Beam, levelers, for 3 D x W top $18 LACP37?^ Set-Screw C-Leg base with Beam, levelers, for 3 D x 7 W top $18 TABLES STEP - IMPRESSION Tip: Height range is 9-3 with 1.5 increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and Casters for 18"D tables LACPC188?^@ Set-Screw C-Leg base with Beam, casters, for 18 x 8 top $18 LACPC18?^@ Set-Screw C-Leg base with Beam, casters, for 18 x top $18 LACPC187?^@ Set-Screw C-Leg base with Beam, casters, for 18 x 7 top $18 Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and Casters for "D tables LACPC8?^@ Set-Screw C-Leg base with Beam, casters, for x 8 top $133 LACPC?^@ Set-Screw C-Leg base with Beam, casters, for x top $133 LACPC7?^@ Set-Screw C-Leg base with Beam, casters, for x 7 top $133 Impression Set-Screw Adjustable C-Leg Base Assembly with Crossbeam and Casters for 3"D tables LACPC38?^@ Set-Screw C-Leg base with Beam, casters, for 3 x 8 top $1 LACPC3?^@ Set-Screw C-Leg base with Beam, casters, for 3 x top $1 LACPC37?^@ Set-Screw C-Leg base with Beam, casters, for 3 x 7 top $1 Tip: Height range is 9-3 with 1.5 increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

48 Impression C-Legs with Powerlex Modesty (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Powerlex Modesty includes -wire power system, duplex receptacles, data openings and jumpers. > See page 1 for Powerlex Grommet option, which can be specified in table top. > For a non-powered version (just modesty with trough and legs) subtract $3 from the list price and put a Z in front of the part number. > Installation hardware is included. > Base Power-In must be specified with base. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Impression C-Leg Base Assembly with Powerlex Modesty and Levelers, for "D tables LCP81^ C-Leg base with Powerlex Modesty, levelers, for x 8 top, Circuit 1 $1 LCP1^ C-Leg base with Powerlex Modesty, levelers, for x top, Circuit 1 $1353 LCP71^ C-Leg base with Powerlex Modesty, levelers, for x 7 top, Circuit 1 $15 LCP8^ C-Leg base with Powerlex Modesty, levelers, for x 8 top, Circuit $1 LCP^ C-Leg base with Powerlex Modesty, levelers, for x top, Circuit $1353 LCP7^ C-Leg base with Powerlex Modesty, levelers, for x 7 top, Circuit $15 Tip: Powerlex Modesty includes -wire power system, duplex receptacles, data openings and jumpers. Tip: See page 1 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $3 from the list price and put a Z in front of the part number. Tip: Specify Base Power-In (see below). Impression C-Leg Base Assembly with Powerlex Modesty and Levelers, for 3"D tables LCP381^ C-Leg base with Powerlex Modesty, levelers, for 3 x 8 top, Circuit 1 $13 LCP31^ C-Leg base with Powerlex Modesty, levelers, for 3 x top, Circuit 1 $138 LCP371^ C-Leg base with Powerlex Modesty, levelers, for 3 x 7 top, Circuit 1 $153 LCP38^ C-Leg base with Powerlex Modesty, levelers, for 3 x 8 top, Circuit $13 LCP3^ C-Leg base with Powerlex Modesty, levelers, for 3 x top, Circuit $138 LCP37^ C-Leg base with Powerlex Modesty, levelers, for 3 x 7 top, Circuit $153 Tip: Powerlex Modesty includes -wire power system, duplex receptacles, data openings and jumpers. Tip: See page 1 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $3 from the list price and put a Z in front of the part number. Tip: Specify Base Power-In (see below). Notes TABLES STEP - IMPRESSION Base Power-Ins A8BP7 Base Power-In for Hardwire, 7 $18 A8BP1 Base Power-In for Hardwire, 1 $3 A1BP7 Base Power-In for RA Plug Circuit 1 (only), 7 $39 Tip: Use hardwire in feeds if UL listed (not recognized) is required. Tip: Infeeds have a amp plug end which requires a amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek Amp to -Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses. Routing Hole Covers 15 amp Receptacle amp Receptacle WCVRB Routing Hole Cover, Black $ WCVRS Routing Hole Cover, Silver $ WCVRT Routing Hole Cover, Medium Tone $ Tip: Powerlex tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.

49 Impression Straight Legs and Conference O-Bases (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ STEP - Legs w/ Casters Only (@) Caster Color Suffix List: B Black G Grey +$ > Straight legs are 3 x1.5. Installation hardware is included. > Rectangular aluminum legs have two passageways 5/8" x 1-5/1" per leg. For steel legs there is a single passageway 1-5/1" x -3/". > Standard height is For shorter heights put X in front of the part number and add $5 list. For taller steel legs, put XX in front and add $8 list. Taller height anodized aluminum legs not available. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. COORDINATING See pages for coordinating Impression furniture. TABLES STEP - IMPRESSION STEP 3 - Steel Legs Only (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. Impression Straight Legs with Levelers LPP?^ Straight Leg, Levelers, painted steel $193 LPP?^ Straight Leg, Levelers, painted steel, package of two $387 LPPAL Straight Leg, Levelers, clear anodized aluminum $177 LPPAL Straight Leg, Levelers, clear anodized aluminum, package of two $353 Impression Straight Legs with Levelers - Bar Height (") LPPBH?^ Straight Leg, bar height, painted steel $1 LPPBH?^ Straight Leg, bar height, painted steel, package of two $53 Impression Conference O-Legs with Levelers, package of one LSQCONF18^ Conference O-Leg 3/ D top $9 LSQCONF^ Conference O-Leg for 8 D top $99 LSQCONF3^ Conference O-Leg for 5 D top $3 LSQCONF3^ Conference O-Leg for D top $3 Tip: For cable manager use the LPCMC cover below. Tip: For O-Legs for worksurfaces, see page 31. Impression Cable Management Covers LPCM^ Cable Management Cover for Leg with Leveler $57 LPCMC^ Cable Management Cover for Leg with Caster $57 LPCMA^ Cable Management Cover for Flip Table with Casters $57 Tip: Does not fit LPPSQAL and LPPSQ square legs. Tip: Creates a 3/8" gap for cable routing. Impression Straight Legs with Casters LPPC?@^ Straight Leg, Casters, painted steel $1 LPPC?@^ Straight Leg, Casters, painted steel, package of two $33 LPPALC@ Straight Leg, Casters, clear anodized aluminum $ LPPALC@ Straight Leg, Casters, clear anodized aluminum, package of two $ Impression Set-Screw Adjustable Straight Legs with Levelers LPPA^ Set-Screw Straight Leg, levelers, painted steel $31 LPPA^ Set-Screw Straight Leg, levelers, painted steel, package of two $ Tip: Height range is 9-3 with 1 1/ inch increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Impression Set-Screw Adjustable Straight Legs with casters LPPAC@^ Set-Screw Straight Leg, casters, painted steel $383 LPPAC@^ Set-Screw Straight Leg, casters, painted steel, package of two $7 Tip: Height range is 9-3 with 1.5 inch increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover.

50 Impression X-Bases - -Post X-Base Only (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ STEP - Steel Legs Only (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP 3 - Legs w/ Casters Only (@) Caster Color Suffix List: B Black G Grey +$ > Standard height is For shorter heights put X in front of the part number and add $5 list ($18 for a -post x-base). For taller steel legs, put XX in front and add $8 list ($13 for a -post x-base). Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Description List Price (US$) Impression X-Bases with Levelers LXPA^ X-base, levelers, for round top (spread x ) $53 LXPB^ X-base, levelers, for 3-3 round or -3 sq top ( x spread) $8 LXPC^ X-base, levelers for round or 3 sq top (3 x 3 spread) $81 LXPD^ X-base, levelers for 8 round or sq top (38 x 38 spread) $95 Impression -Post X-Base with Levelers LXPE?^ -Post X-base, levelers, for 5-8 round top (spread 8 x 8 ) $17 LXPEF# Laminate Infill (no door) for LXPE $13 LXPENFD# Laminate Infill (with door) for LXPE $117 Part Number Description COORDINATING See pages for coordinating Impression furniture. List Price (US$) Impression X-Bases with Power/Data Top Plate and Levelers LX3PA^ X-base w/ P/D Top Plate, levelers, for round top ( x spread) $71 LX3PB^ X-base w/ P/D Top Plate, levelers, for 3-3 round or -3 sq top ( x spread) $77 LX3PC^ X-base w/ P/D Top Plate, levelers, for round or 3 sq top (3 x 3 spread) $79 LX3PD^ X-base w/ P/D Top Plate, levelers, for 8 round or sq top (38 x 38 spread) $81 Tip: Includes hole in bottom of leg for cable management and special top plate that allows room for power/data in center of top. Tip: Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units. Impression X-Bases with Power/Data Top Plate and Levelers - Bar Height LX3PBBA^ X-base w/ P/D Top Plate, bar height, levelers, for round top ( x spread) $817 LX3PBBB^ X-base w/ P/D Top Plate, bar height, levelers, for 3-3 round or -3 sq top ( x spread) $8 LX3PBBC^ X-base w/ P/D Top Plate, bar height, levelers, for round or 3 sq top (3 x 3 spread) $85 LX3PBBD^ X-base w/ P/D Top Plate, bar height, levelers, for 8 round or sq top (38 x 38 spread) $85 TABLES STEP - IMPRESSION - Infill Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +$ Y *Formica Non-Premium (includes 58, 3, +$9 MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. Impression X-Bases with Levelers - Bar Height LXPBBA^ X-base, bar height, levelers, for round top ( x spread) $78 LXPBBB^ X-base, bar height, levelers, for 3-3 round or - 3 sq top $7 ( x spread) LXPBBC^ X-base, bar height, levelers, for round or 3 sq top $735 (3 x 3 spread) LXPBBD^ X-base, bar height, levelers, for 8 round or sq top $79 (38 x 38 spread) Impression -Post X-Base with Levelers - Bar Height LXPBE?^ -Post X-base, bar height, levelers, for 5-7 round top $1775 (8 x 8 spread) LXPBEF# Laminate Infill (no door) for LXPBE (bar height) $1313 LXPBENFD# Laminate Infill (with door) for LXPBE (bar height) $153 Impression X-Bases on Casters LXPAC^@ X-base, casters, for round top ( x spread) $73 LXPBC^@ X-base, casters, for 3-3 round or -3 sq top ( x spread) $778 LXPCC^@ X-base, casters, for round or 3 sq top (3 x 3 spread) $791 LXPDC^@ X-base, casters, for 8 round or sq top (38 x 38 spread) $8 Tip: Includes hole in bottom of leg for cable management and special top plate that allows room for power/data in center of top. Tip: Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units. Impression X-Bases with Power/Data Top Plate and Casters LX3PAC^@ X-base w/ P/D Top Plate, casters, for round top ( x spread) $89 LX3PBC^@ X-base w/ P/D Top Plate, casters, for 3-3 round or -3 sq top ( x spread) $885 LX3PCC^@ X-base w/ P/D Top Plate, casters, for round or 3 sq top (3 x 3 spread) $897 LX3PDC^@ X-base w/ P/D Top Plate, casters, for 8 round or sq top (38 x 38 spread) $91 Tip: Includes hole in bottom of leg for cable management and special top plate that allows room for power/data in center of top. Tip: Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units. Impression Flip X-Bases on Casters LXPAAC^@ Flip X-base, casters, for round top ( x spread) $19 LXPABC^@ Flip X-base, casters, for 3-3 round or -3 sq top ( x spread) $118 LXPACC^@ Flip X-base, casters, for round or 3 sq top (3 x 3 spread) $11 LXPADC^@ Flip X-base, casters, for 8 round or sq top (38 x 38 spread) $11 Impression -Post X-Base with Casters LXPEC?^@ -Post X-base, casters, for 5-8 round top (8 x 8 spread) $17

51 Impression Crank Bases (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork. com. > Tops ordered separately. > Ships unassembled. > Installation hardware is included. > Use Solano Fast Crank height-adjustable bases, with Sit/Stand height range of - (with top), as a less expensive alternative. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Impression Crank Adjustment C-Leg Base Assemblies with Levelers for Rectangular Tables LFAER^ Crank C-Leg Base for x 8-7 W Table (foot depth is ) $179 LFAER3^ Crank C-Leg Base for 3 x 8-7 W Table (foot depth is ) $1795 Tip: Adjustment range is 7" to 5" (including top). Tip: For shorter widths (3 - ) put a W in front of the part number. For longer widths (78-9 ) put a Z in front of the part number. TABLES STEP - IMPRESSION Impression Crank Adjustment C-Leg Base Assemblies with Casters for Rectangular Tables LFAERC^ Crank C-Leg Base for x 8-7 W Table (foot depth is ) $189 LFAERC3^ Crank C-Leg Base for 3 x 8-7 W Table (foot depth is ) $187 Tip: Adjustment range is 7" to 5" (including top). Tip: For shorter widths (3 - ) put a W in front of the part number. For longer widths (78-9 ) put a Z in front of the part number. Notes Impression Crank Adjustment -Legged C-Leg Base Assembly with Levelers for Corner Tables LFAEC^ Crank -Leg, C-Leg Base for D corner table (foot depth is ) $17 Impression Crank Adjustment 3-Legged C-Leg Base Assembly with Levelers for 1-Degree Tables LFAET^ Crank 3-Leg, C-Leg Base for "x "x 8"x 8" top (foot depth is ") $877 Tip: Adjustment range is 8.5" to.5" (including top). Five and a half cranks per inch. Impression Crank Adjustment 3-Legged C-Leg Base Assembly with Levelers for L-Workstations LFAEL^ Crank 3-Leg, C-Leg Base for "x "x 7"x 7" $8 9 degree top (foot depth is ") Tip: Adjustment range is 8.5" to.5" (including top). Five and a half cranks per inch.

52 Impression XT-Series ANSI/BIFMA Electric Adjustable Bases 1 11 Impression XT-Series Sit/Stand Electric Adjustable Bases (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > 5 pound load capacity. > Bosch Electric motor present in each leg. > Adjusts up to 1. inch/second. > Adjusts via included up/down controller (no display). > Height adjustment range of high (with top). Meets ANSI/BIFMA specifications. > Bases are -stage (3-tube). > Installation hardware is included. > Tops sold separately. > Ships unassembled. > Available as a -leg and 3-leg model as standard (-leg as special). > Optional programmable digital display available on next page. > Use Solano VT Electric height-adjustable bases, with Sit/Stand height range of -9.5 (with top), as a less expensive alternative. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Impression XT-Series -Legged, -Stage (3-tube) Electric Adjustment C-leg Base Assemblies for Rectangle Tables LFAER^ XT -Leg, -stage (3-tube) Electric Base, Levelers, for D rectangle table $385 LFAER3^ XT -Leg, -stage (3-tube) Electric Base, Levelers, for 3 D rectangle table $11 LFAERC^ XT -Leg, -stage (3-tube) Electric Base, Casters, for D rectangle table $535 LFAERC3^ XT -Leg, -stage (3-tube) Electric Base, Casters, for 3 D rectangle table $51 Tip: For use on 8-7 wide rectangle tops (adjustable cross bar). Tip: For shorter widths (3"-") put a "W" in front of the part number. For longer widths (78"-9") put a "Z" in front of the part number. Tip: On bases with casters, the height range changes to.1-9.8, not ANSI/BIFMA. Impression XT-Series -Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assembly with Levelers for Corner Tables LFAEC^ XT -Leg, -stage (3-tube) Electric Base for D corner table $5 Tip: For use on "D tops, - 8 wide corners only (adjustable cross bar). Impression XT-Series -Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assembly with Angled Feet and Levelers for 1-Degree Tables LFAEJ^ XT -Leg, -stage (3-tube) Electric Base, angled feet, for 1-Degree table $87 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). > Adjusts via included up/down controller (no display). > 5 pound load capacity. > Adjustment range is - 5 (including top). > Bases are 1-stage (-tube). > Installation hardware is included. > Tops sold separately. > Ships unassembled. > Optional controller with digital display available. > For shorter widths (3"-") put a "W" in front of the part number. For longer widths (78"-9") put a "Z" in front of the part number. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Impression XT-Series -Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assemblies for Rectangle Tables LFAER^ XT -Leg, 1-stage (-tube) Electric Base, Levelers, for D rectangle table $198 LFAER3^ XT -Leg, 1-stage (-tube) Electric Base, Levelers, for 3 D rectangle table $3 LFAERC^ XT -Leg, 1-stage (-tube) Electric Base, Casters, for D rectangle table $75 LFAERC3^ XT -Leg, 1-stage (-tube) Electric Base, Casters, for 3 D rectangle table $38 Tip: For use on 8-7 wide rectangle tops (adjustable cross bar). Tip: For shorter widths (3"-") put a "W" in front of the part number. For longer widths (78"-9") put a "Z" in front of the part number. Tip: On bases with casters, the height range changes to Impression XT-Series -Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly for Corner Tables LFAEC^ XT -Leg, 1-stage (-tube) Electric Base for "D corner table $173 Tip: For use on "D tops, - 8 wide corners only (adjustable cross bar). Impression XT-Series -Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly w/ Angled Feet & Levelers for 1-Degree Tables LFAEJ^ XT -Leg, 1-stage (-tube) Electric Base, angled feet, for 1-Degree table $8 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). TABLES STEP - IMPRESSION Impression XT-Series 3-Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assembly with Levelers for 1-Degree Tables LFAET^ XT 3-Leg, -stage (3-tube) Electric Base, for 1-Degree table $3811 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. Impression XT-Series 3-Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assembly with Levelers for L-Workstations LFAEL^ XT 3-Leg, -stage (3-tube) Electric Base, for L-Workstation $3739 Tip: For use on "D tops, 8-7 wide (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. Impression XT-Series 3-Leg, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly for 1-Degree Tables LFAET^ XT 3-Leg, 1-stage (-tube)electric Base, for 1-Degree table $359 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. Impression XT-Series 3-Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly for L-Workstations LFAEL^ XT 3-Leg, 1-stage (-tube) Electric Electric Base, for L-Workstation $3387 Tip: For use on "D tops, 8-7 wide (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. XT-Series Controller with Digital Read-Out Display (Optional) LFADD Controller, Digital Display, for XT-Series bases, black $15

53 1 13 Impression Classroom Tables (Complete Tables) & Power Kits (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Inner and outer back panels are steel > Monitor lifts accept monitors that adhere to the VESA Mounting Standard > Contains storage for keyboards and mouse with monitor. Monitor storage is released by pushing down on top. > Includes a cable trough in the bottom for plug strips or hardwire power. > Includes cable management kit. > Worksurface included. > Ships assembled. > See maximum monitor sizes (diagonal measurement) below. For larger sizes designteam@enwork.com. > Powerlex Modesty includes -wire power system and duplex receptacles. In a Classroom Table, the receptacles are concealed within the modesty (not user accessible). For user access, specify a cut-out in Step 1. Use Villa, Axil-X, or Cove. For other power/data solutions, contact designteam@enwork.com. Power/data units are ordered separately. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. COORDINATING See pages for coordinating Command Centers and Lecterns. TABLES STEP - IMPRESSION STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, +$3 -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +$5 MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +$7 Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. Impression Classroom Tables with Levelers LCP33^# Classroom Table, 3 D x 3 W $1789 Tip: Minimal room underneath table for CPU holder - affects kneespace. LCP33^# Classroom Table, 3 D x 3 W $1885 Tip: Room exists underneath table for two CPU holders. (ordered separately) LCP3^# Classroom Table, 3 D x W $57 Tip: Minimal room underneath table for CPU holder - affects kneespace. LCP37^# Classroom Table, 3 D x 7 W $3185 Tip: Room exists underneath table for two CPU holders. (ordered separately) Impression Classroom Tables with Monitor Lift(s) and Levelers LCM33^# Classroom Table with Single Monitor Lift, 3 D x 3 W $31 Tip: Works with most flat screens, 3 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace. LCM33^# Classroom Table with Single Monitor Lift, 3 D x 3 W $3357 Tip: Works with most flat screens, 5 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately) LCM3^# Classroom Table with Double Monitor Lift, 3 D x W $5777 Tip: Works with most flat screens, 3 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace. LCM37^# Classroom Table with Double Monitor Lift, 3 D x 7 W $5935 Tip: Works with most flat screens, 5 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately) Classroom Table Power Kits (Optional) LCMP13 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, Circuit 1 $1 LCMP13 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, Circuit 1 $5 LCMP1 Kit for W Classroom Table, duplex receptacles, no data, two jumpers, Circuit 1 $87 LCMP17 Kit for 7 W Classroom Table, duplex receptacles, no data, two jumpers, Circuit 1 $3 LCMP3 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, Circuit $1 LCMP3 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, Circuit $5 LCMP Kit for W Classroom Table, duplex receptacles, no data, two jumpers, Circuit $87 LCMP7 Kit for 7 W Classroom Table, duplex receptacles, no data, two jumpers, Circuit $3 Base Power Infeeds A8BP7 Base Power Infeed for Hardwire, 7 $18 A8BP1 Base Power Infeed for Hardwire, 1 $3 A1BP7 Base Power Infeed for RA Plug Circuit 1 (only), 7 $39 Tip: Use hardwire infeeds if UL listed (not recognized) is required. Tip: Infeeds have a amp plug end which requires a amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek Amp to -Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses. 15 amp Receptacle amp Receptacle Routing Hole Cover WCVRB Routing Hole Cover, Black $ WCVRS Routing Hole Cover, Silver $ WCVRT Routing Hole Cover, Medium Tone $ Tip: Classroom tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.

54 1 15 Landing Team Tables (Complete Tables) (#) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Power/Data Cut-out, Centered +$3 C Two Power/Data Cut-outs +$7 X Other TBD STEP (@) Laminate Suffix List: A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Double support panels (1"H) run the entire length of the top to hide power data units and cables. > Part number includes entire table (ie. top, sides, and structure). > Tables 18" and longer have a center panel. > Assembly required. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Landing Team Tables - 9" Seated Height NEL937#@ Team Table, seated, 3 D x 7 W $11 NEL938#@ Team Table, seated, 3 D x 8 W $15 NEL939#@ Team Table, seated, 3 D x 9 W $15 NEL97#@ Team Table, seated, D x 7 W $15 NEL98#@ Team Table, seated, D x 8 W $171 NEL99#@ Team Table, seated, D x 9 W $171 NEL987#@ Team Table, seated, 8 D x 7 W $15 NEL988#@ Team Table, seated, 8 D x 8 W $171 NEL989#@ Team Table, seated, 8 D x 9 W $171 NEL99#@ Team Table, seated, D x 9 W $13 NEL9818#@ Team Table, seated, 8 D x 18 W ( piece top) $91 NEL981#@ Team Table, seated, 8 D x 1 W ( piece top) $91 NEL9813#@ Team Table, seated, 8 D x 13 W ( piece top) $3138 NEL981#@ Team Table, seated, 8 D x 1 W ( piece top) $3138 NEL918#@ Team Table, seated, D x 18 W ( piece top) $3131 NEL91#@ Team Table, seated, D x 1 W ( piece top) $3131 NEL913#@ Team Table, seated, D x 13 W ( piece top) $33 NEL91#@ Team Table, seated, D x 1 W ( piece top) $33 Laminate Landing Team Tables - " Standing Height NEL37#@ Team Table, standing, 3 D x 7 W $159 NEL38#@ Team Table, standing, 3 D x 8 W $185 NEL39#@ Team Table, standing, 3 D x 9 W $185 NEL7#@ Team Table, standing, D x 7 W $171 NEL8#@ Team Table, standing, D x 8 W $1981 NEL9#@ Team Table, standing, D x 9 W $1981 NEL87#@ Team Table, standing, 8 D x 7 W $171 NEL88#@ Team Table, standing, 8 D x 8 W $1981 NEL89#@ Team Table, standing, 8 D x 9 W $1981 NEL9#@ Team Table, standing, D x 9 W $ NEL818#@ Team Table, standing, 8 D x 18 W ( piece top) $39 NEL81#@ Team Table, standing, 8 D x 1 W ( piece top) $39 NEL813#@ Team Table, standing, 8 D x 13 W ( piece top) $3 NEL81#@ Team Table, standing, 8 D x 1 W ( piece top) $3 NEL18#@ Team Table, standing, D x 18 W ( piece top) $355 NEL1#@ Team Table, standing, D x 1 W ( piece top) $355 NEL13#@ Team Table, standing, D x 13 W ( piece top) $3757 NEL1#@ Team Table, standing, D x 1 W ( piece top) $3757 TABLES STEP - LANDING Laminate Wire Chases for 9"H Seated Height Landing Team Tables, Package of two (one for each end) NELPM9@ Laminate Wire Chases for Landing Team Table, seated $515 Laminate Wire Chases for "H Standing Height Landing Team Tables, Package of two (one for each end) NELPM@ Laminate Wire Chases for Landing Team Table, standing $55

55 1 17 Lugano Fixed Height & Height-Adjustable Conference Bases A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +$3 Y *Formica Non-Premium (includes 58, 3, +$8 MC, SP, and NT finishes), and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +$9 Premium, Formica Premium (WR,, 77,, RD finishes), and Formica 59-9 Brite White whiteboard laminates. > Post-form laminate base cabinet > 11 and 1 gauge steel mitered top structure to support extended top oversails > 11 and 1 gauge steel mitered, tapered plinth > Internal wire and cable routing passage > Each base includes one removable access door for positioning technology and routing cables > Tapered plinth and top structure painted to match > Power Data assemblies can be positioned directly over the center of bases. For other P/D positions, contact designteam@enwork.com. > Only Alexander, Ellora (excluding PDE8), Flip-n-Go, Cove, and Villa power data assemblies fit over Lugano bases. For other P/D assemblies, contact designteam@enwork.com. > Bases on this page can be used with Conference Rectangle, Boat and Capsule tops. > Tops are ordered separately. > Lugano bases shipped assembled. Bases are heavy and bulky, which may require disassembly in the field during installation. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. > Post-form laminate base cabinet > 11 and 1 gauge steel mitered top structure to support extended top oversails > 11 and 1 gauge steel mitered, tapered plinth > Internal wire and cable routing passage > Each base includes one removable access door for positioning technology and routing cables > Electric height-adjustable base adjustment range > Electric height-adjustable base supports lbs. load > Adjusts up to.75 inch/second. Adjustment speed may be slower with Back-painted Glass, Luminesse, and KrystalCast tops. > Lugano bases on this page can be used with Laminate, Veneer, Back-painted Glass, KrystalCast, Statement and Luminesse tops. Cambria Quartz and Solid Surface tops cannot be paired with a Lugano height-adjustable base, specify a fixed-height Lugano base instead. > Tapered plinth and top structure painted to match > Power Data assemblies can be positioned directly over the center of bases. For other P/D positions, contact designteam@enwork.com. > Only Alexander, Ellora (excluding PDE8), Flip-n-Go, Cove, and Villa power data assemblies fit over Lugano bases. For other P/D assemblies, contact designteam@enwork.com. > Bases on this page can be used with Conference Rectangle, Boat and Capsule tops. > Tops are ordered separately. > Lugano bases shipped assembled. Bases are heavy and bulky, which may require disassembly in the field during installation. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. TABLES STEP - LUGANO *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. STEP (^) Paint Suffix List S Silver (textured) G Storm (textured) R Black (textured) T Medium Tone (textured) W Arctic White (textured) Z Other (textured) +$TBD Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. Lugano Square Conference Base, Seated Height (3") LU1S9A#^ Square, Seated Base for -8 top $1 LU1S95B#^ Square, Seated Base for 5 top $79 LU1S9C#^ Square, Seated Base for top $77 Lugano Rectangle Conference Base, Seated Height (3") LU19A#^ Rectangle, Seated Base for -8 D x 7-8 W top $88 LU19B#^ Rectangle, Seated Base for -8 D x 9-18 W top $8 LU19C#^ Rectangle, Seated Base for -8 D x 1-13 W top $97 LU19D#^ Rectangle, Seated Base for -8 D x 1 W top $1,89 LU195A#^ Rectangle, Seated Base for 5 D x 7-8 W top $713 LU195B#^ Rectangle, Seated Base for 5 D x 9-18 W top $831 LU195C#^ Rectangle, Seated Base for 5 D x 1-13 W top $1, LU195D#^ Rectangle, Seated Base for 5 D x 1 W top $11, LU19A#^ Rectangle, Seated Base for D x 7-8 W top $7999 LU19B#^ Rectangle, Seated Base for D x 9-18 W top $9358 LU19C#^ Rectangle, Seated Base for D x 1-13 W top $1,9 LU19D#^ Rectangle, Seated Base for D x 1 W top $11,917 Lugano Rectangle Conference Base, Electric Height-Adjustable Tables LU1HAA#^ Rectangle Base, Electric HA, for -8 D x 7-8 W top $1,31 LU1HAB#^ Rectangle Base, Electric HA, for -8 D x 9-18 W top $1,51 LU1HAC#^ Rectangle Base, Electric HA, for -8 D x 1-13 W top $1,53 LU1HAD#^ Rectangle Base, Electric HA, for -8 D x 1 W top $17,937 Tip: Back-painted glass tops not available. LU1HA5A#^ Rectangle Base, Electric HA, for 5 D x 7-8 W top $1,71 LU1HA5B#^ Rectangle Base, Electric HA, for 5 D x 9-18 W top $1,7 LU1HA5C#^ Rectangle Base, Electric HA, for 5 D x 1-13 W top $1,973 Tip: Back-painted glass tops not available. LU1HA5D#^ Rectangle Base, Electric HA, for 5 D x 1 W top $18,7 Tip: Back-painted glass tops not available. LU1HAA#^ Rectangle Base, Electric HA, for D x 7-8 W top $13,5 LU1HAB#^ Rectangle Base, Electric HA, for D x 9-18 W top $15,398 LU1HAC#^ Rectangle Base, Electric HA, for D x 1-13 W top $17,13 Tip: Back-painted glass tops not available. LU1HAD#^ Rectangle Base, Electric HA, for D x 1 W top $19,1 Tip: Back-painted glass tops not available.

56 18 19 Sawhorse Table Legs & Bases - Conference Bases Only (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP (^) Paint Suffix List: G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is 7.75 > Square tubes are 1.5 x 1.5. Rectangle tubes are 1.5 x 3. > Installation hardware included > Cable routing holes available on conference table bases. No cable routing hole in training table legs. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Sawhorse Training Table Legs (square tube) with Levelers, package of two LQT18^ Training Table Legs, levelers, for 18 D Table $55 LQT^ Training Table Legs, levelers, for D Table $537 LQT3^ Training Table Legs, levelers, for 3 /3 D Table $553 Tip: Each package of legs supports a complete training table. Sawhorse Training Table Legs (square tube) with Black Casters, package of two LQT18C^ Training Table Legs, casters, for 18 D Table $5 LQTC^ Training Table Legs, casters, for D Table $551 LQT3C^ Training Table Legs, casters, for 3 /3 D Table $58 Notes TABLES STEP - SAWHORSE Tip: Each package of legs supports a complete training table. Sawhorse Conference Table Base (rectangle tube) with levelers, package of two individual legs LQTCT?^ Conference Table Legs for 3 - D Table $3 LQRRBH?^ Conference Table Legs for 3 - D Tables, Bar Height ( H) $98 Tip: Bases are designed to be inset - from conference table ends for tables greater than 9 W. Tip: Each package of individual legs supports one side of a conference table.

57 Sensation T-Legs & T-Leg Flip Tables Sensation T-Leg Flip Tables (Complete Table) (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP - Legs with Casters Only (@) Caster Color Suffix List: B Black G White with Grey Trim +$ STEP 3 (^) Paint Suffix List: G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Polished aluminum feet (not columns) are available at. This creates a two-tone color scheme. Free form Polished Feet on your order and put a Z in front of the part number. Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $118 list. For taller, put XX in front and add $118 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > Installation hardware is included. > Polished aluminum feet with painted steel vertical columns are available. See Step 3. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Sensation T-Legs with Levelers, package of two LMT18?^ T-Leg, levelers, for 18 D table (1 spread) $5 LMT?^ T-Leg, levelers, for D table ( spread) $57 LMT3?^ T-Leg, levelers, for 3-3 D table ( spread) $573 Sensation T-Legs with Casters, package of two LMTC18?@^ T-Leg, casters, for 18 D table (1 spread) $59 LMTC?@^ T-Leg, casters, for D table ( spread) $9 LMTC3?@^ T-Leg, casters, for 3-3 D table ( spread) $51 Sensation Folding T-Leg Base Assembly with Levelers, package of two LMTF18^ Folding T-Leg, levelers, for 18 D table (1 spread) $98 LMTF^ Folding T-Leg, levelers, for D table ( spread) $1 LMTF3^ Folding T-Leg, levelers, for 3-3 D table ( spread) $158 Tip: Folding T-Legs can be mounted on tables as short as W Sensation Folding T-Leg Base Assembly with Casters, package of two LMTFC18@^ Folding T-Leg, casters, for 18 D table (1 spread) $13 LMTFC@^ Folding T-Leg, casters, for D table ( spread) $11 LMTFC3@^ Folding T-Leg, casters, for 3-3 D table ( spread) $1119 Tip: Folding T-Legs can be mounted on tables as short as W Sensation TT-Leg with Levelers, package of one LMT8?^ TT-Leg, levelers for D and 8 D table (39 spread) $53 LMT?^ TT-Leg, levelers for D table ( spread) $59 Tip: Split-Y Leg is another option, see page 13. > Angled leg flip tables nest in-line. Straight leg flip tables nest off-set. Nested, both leg styles have 7-1/ between front of one table to front of the next table. > Angled foot depth is approximately 13 for 18 D flip tables, 19 for D flip tables, and.5 for 3 D flip tables. Straight foot depth is approximately 13.5 for 18 D flip tables, 19.5 for D flip tables, and 5.5 for 3 D flip tables. > As of May 18, the Sensation flip mechanism has changed. COORDINATING See pages for coordinating Sensation furniture. > Installation hardware is included. > A special 7 H hinged modesty panel, or a narrower width, are recommended for use with 3 D Sensation flip bases to avoid potential paint scratches on the feet. Contact designteam@enwork.com for more details. > Flip tables include Top with 3mm edge or knife edge on user side. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. 3mm Edge Laminate worksurface on Sensation T-Leg (straight) Flip Base, 18 D LMRS188A^?@*# 18 D Sensation Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $159 LMRS18A^?@*# 18 D Sensation Straight T-Leg Flip Table W Top w/ 3mm Edge $1387 LMRS187A^?@*# 18 D Sensation Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $133 LMRS189A^?@*# 18 D Sensation Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $1577 3mm Edge Laminate worksurface on Sensation T-Leg (straight) Flip Base, D LMRS8A^?@*# D Sensation Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $178 LMRSA^?@*# D Sensation Straight T-Leg Flip Table W Top w/ 3mm Edge $1 LMRS7A^?@*# D Sensation Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $19 LMRS9A^?@*# D Sensation Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $159 3mm Edge Laminate worksurface on Sensation T-Leg (straight) Flip Base, 3 D LMRS38A^?@*# 3 D Sensation Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $1358 LMRS3A^?@*# 3 D Sensation Straight T-Leg Flip Table W Top w/ 3mm Edge $18 LMRS37A^?@*# 3 D Sensation Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $1539 LMRS39A^?@*# 3 D Sensation Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $185 3mm Edge Laminate worksurface on Sensation T-Leg (angled) Flip Base LMRAA^?@*# D Sensation Angled T-Leg Flip Table W Top w/ 3mm Edge $11 LMRA7A^?@*# D Sensation Angled T-Leg Flip Table 7 W Top w/ 3mm Edge $158 LMRA3A^?@*# 3 D Sensation Angled T-Leg Flip Table W Top w/ 3mm Edge $151 LMRA37A^?@*# 3 D Sensation Angled T-Leg Flip Table 7 W Top w/ 3mm Edge $1598 Knife Edge (user side) Laminate worksurface on Sensation T-Leg (straight) Flip Base, 18 D LMRS188K^?@*# 18 D Sensation Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $139 LMRS18K^?@*# 18 D Sensation Straight T-Leg Flip Table W Top w/ Knife Edge User Side $1515 LMRS187K^?@*# 18 D Sensation Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $1575 LMRS189K^?@*# 18 D Sensation Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $17 Knife Edge (user side)laminate worksurface on Sensation T-Leg (straight) Flip Base, D LMRS8K^?@*# D Sensation Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $137 LMRSK^?@*# D Sensation Straight T-Leg Flip Table W Top w/ Knife Edge User Side $1531 LMRS7K^?@*# D Sensation Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $159 LMRS9K^?@*# D Sensation Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $1778 Knife Edge (user side) Laminate worksurface on Sensation T-Leg (straight) Flip Base, 3 D LMRS38K^?@*# 3 D Sensation Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $17 LMRS3K^?@*# 3 D Sensation Straight T-Leg Flip Table W Top w/ Knife Edge User Side $131 LMRS37K^?@*# 3 D Sensation Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $175 LMRS39K^?@*# 3 D Sensation Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $1895 Knife Edge (user side) Laminate worksurface on Sensation T-Leg (angled) Flip Base LMRAK^?@*# D Sensation Angled T-Leg Flip Table W Top w/ Knife Edge User Side $159 LMRA7K^?@*# D Sensation Angled T-Leg Flip Table 7 W Top w/ Knife Edge User Side $151 LMRA3K^?@*# 3 D Sensation Angled T-Leg Flip Table W Top w/ Knife Edge User Side $19 LMRA37K^?@*# 3 D Sensation Angled T-Leg Flip Table 7 W Top w/ Knife Edge User Side $17 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP (?) Routing Hole Suffix List: N No routing hole in one leg Y Routing hole in one leg +$ Z Routing hole in two legs +$1 STEP 3 (@) Caster Color Suffix List: B Black G White w/ Grey Trim +$ STEP (*) Cable Management Suffix List: N No Cable Management G Grommet (one, center rear) +$18 U Power/Data cut-out +$3 (one, center rear) X Other TBD STEP 5 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium +$3 laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard +$5 (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$7 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. TABLES STEP - SENSATION

58 Sensation Straight Legs, X-Bases, & C-Legs (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP - Legs with Casters Only (@) Caster Color Suffix List: B Black G White with Grey Trim +$ > Straight leg flip tables nest off-set. Nested, tables have 7-1/ between front of one table to front of the next table. > Straight foot depth is approximately 13.5 for 18 D flip tables, 19.5 for D flip tables, and 5.5 for 3 D flip tables. > Standard height is For shorter heights put X in front of the part number and add $118 list. For taller, put XX in front and add $118 list. Double for -Post X Base. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > Installation hardware is included. > Polished aluminum feet with painted steel vertical columns are available. See Step 3. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Description List Price (US$) COORDINATING See pages for coordinating Sensation furniture. TABLES STEP - SENSATION STEP 3 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Polished aluminum feet (not columns) are available at. This creates a two-tone color scheme. Free form Polished Feet on your order and put a Z in front of the part number. Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. Sensation Straight Legs (.3" diameter) with levelers LMA?^ Straight Leg, leveler $153 LMA?^ Straight Leg, leveler, package of two $3 Sensation Straight Legs with locking casters LMAC?@^ Straight Leg, caster $19 LMAC?@^ Straight Leg, caster, package of two $31 Sensation X-Bases with Levelers LMXA?^ X-Base, levelers, for round table ( x spread) $59 LMXB?^ X-Base, levelers, for 3-3 round or -3 square table ( x spread) $18 LMXC?^ X-Base, levelers, for round or 3 square table (3 x 3 spread) $3 Tip: 8 Round and " Square tops use two Y-legs (LMY3^@) Sensation X-Bases with Levelers and Flared Column Casting for Power/Data Unit LMXAP^ X-Base, for P/D, for round table $71 LMXBP^ X-Base, for P/D, for 3-3 round or -3 square table $7 LMXCP^ X-Base, for P/D, for round or 3 square table $753 Tip: Designed to accommodate Node Power/Data Unit. Tip: Cables exit through the bottom of the column. Sensation C-Legs with Levelers, package of two LMC18?^ C-Leg, leveler, for 18 D table (17 spread) $5 LMC?^ C-Leg, leveler, for D table ( spread) $57 LMC3?^ C-Leg, leveler, for 3 D table (7 spread) $573 Sensation C-Legs with Casters, package of two LMCC18?@^ C-Leg, caster, for 18 D table (17 spread) $59 LMCC?@^ C-Leg, caster, for D table ( spread) $9 LMCC3?@^ C-Leg, caster, for 3 D table (7 spread) $51 Sensation X-Bases with levelers - Bar Height LMXBBA?^ X-Base, bar height, levelers, for round table ( x spread) $8 LMXBBB?^ X-Base, bar height, levelers, for 3-3 round or -3 square table ( x spread) $71 LMXBBC?^ X-Base, bar height, levelers, for round or 3 square table (3 x 3 spread) $83 Sensation X-Bases with Levelers and Flared Column Casting for Power/Data Unit - Bar Height LMXBBAP^ X-Base, Bar Height, for P/D, for round table $78 LMXBBBP^ X-Base, Bar Height, for P/D, for 3-3 round or -3 square table $79 LMXBBCP^ X-Base, Bar Height, for P/D, for round or 3 square table $819 Tip: Designed to accommodate Node Power/Data Unit. Tip: Cables exit through the bottom of the column. Sensation X-Bases on Casters LMXAC?@^ X-Base, casters, for round table ( x spread) $33 LMXBC?@^ X-Base, casters, for 3-3 round or -3 square table ( x spread) $53 LMXCC?@^ X-Base, casters, for round or 3 square table (3 x 3 spread) $7 Sensation Flip X-Bases on Casters LMXAAC@^ Flip X-Base, casters for round table ( x spread) $913 LMXABC@^ Flip X-Base, casters for 3-3 round table ( x spread) $99 Sensation -Post X-Bases with Levelers LMXE?^ -Post X-Base, levelers, for round or 8 square table (38 x 38 spread) $155 LMXF?^ -Post X-Base, levelers, for 7-8 -piece round table ( x spread) $11

59 Sensation Straight Y-Legs Sensation Y-Leg Flip Tables (Complete Tables) (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP - Legs with Casters Only (@) Caster Color Suffix List: B Black G White with Grey Trim +$ STEP 3 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Polished aluminum feet (not columns) are available at. This creates a two-tone color scheme. Free form Polished Feet on your order and put a Z in front of the part number. Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $118 list. For taller, put XX in front and add $118 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > Installation hardware is included. > Polished aluminum feet with painted steel vertical columns are available. See Step 3. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Sensation Y-Legs with Levelers, package of two LMY18?^ Y-Leg, levelers, for 18 D table (15 spread) $51 LMY?^ Y-Leg, levelers, for D table (1 spread) $5 LMY3?^ Y-Leg, levelers, for 3 D table (5 spread) $58 Sensation Y-Legs with Casters, package of two LMYC18?@^ Y-Leg, casters, for 18 D table (15 spread) $8 LMYC?@^ Y-Leg, casters, for D table (1 spread) $1 LMYC3?@^ Y-Leg, casters, for 3 D table (5 spread) $3 > Flip Tables do not nest in-line. > As of May 18, the Sensation flip mechanism has changed. > Installation hardware is included. > To avoid paint scratches on legs, Modesty Panels are not recommended for 3"D Sensation Flip Bases. > Flip tables include Top with 3mm edge or knife edge on user side. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. COORDINATING See pages for coordinating Sensation furniture. 3mm Edge Laminate worksurface on Sensation Y-Leg Flip Base, 18 D LMRY18A^?@*# 18 D Sensation Y-leg Flip Table W Top w/ 3mm Edge $15 LMRY187A^?@*# 18 D Sensation Y-leg Flip Table 7 W Top w/ 3mm Edge $191 3mm Edge Laminate worksurface on Sensation Y-Leg Flip Base, D LMRYA^?@*# D Sensation Y-leg Flip Table W Top w/ 3mm Edge $11 LMRY7A^?@*# D Sensation Y-leg Flip Table 7 W Top w/ 3mm Edge $158 3mm Edge Laminate worksurface on Sensation Y-Leg Flip Base, 3 D LMRY3A^?@*# 3 D Sensation Y-leg Flip Table W Top w/ 3mm Edge $151 LMRY37A^?@*# 3 D Sensation Y-leg Flip Table 7 W Top w/ 3mm Edge $1598 Knife Edge (user side) Laminate worksurface on Sensation Y-Leg Flip Base, 18 D LMRY18K^?@*# 18 D Sensation Y-leg Flip Table W Top w/ Knife Edge User Side $1573 LMRY187K^?@*# 18 D Sensation Y-leg Flip Table 7 W Top w/ Knife Edge User Side $133 Knife Edge (user side) Laminate worksurface on Sensation Y-Leg Flip Base, D LMRYK^?@*# D Sensation Y-leg Flip Table W Top w/ Knife Edge User Side $159 LMRY7K^?@*# D Sensation Y-leg Flip Table 7 W Top w/ Knife Edge User Side $151 Knife Edge (user side) Laminate worksurface on Sensation Y-Leg Flip Base, 3 D LMRY3K^?@*# 3 D Sensation Y-leg Flip Table W Top w/ Knife Edge User Side $19 LMRY37K^?@*# 3 D Sensation Y-leg Flip Table 7 W Top w/ Knife Edge User Side $17 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP (?) Routing Hole Suffix List: N No routing hole in one leg Y Routing hole in one leg +$ Z Routing hole in two legs +$1 STEP 3 (@) Caster Color Suffix List: B Black G White w/ Grey Trim +$ STEP (*) Cable Management Suffix List: N No Cable Management G Grommet (one, center rear) +$18 U Power/Data cut-out +$3 (one, center rear) X Other TBD TABLES STEP - SENSATION STEP 5 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium +$3 laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard +$5 (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$7 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection.

60 Sensation Conference Y-Bases (?) Routing Holes Suffix List N No routing holes in base Y Routing hole in one column +$ Z Routing holes in two columns +$1 STEP (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Polished aluminum feet (not columns or footer bar) are available at. This creates a two-tone color scheme. Free form Polished Feet on your order and put a Z in front of the part number. Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $118 list. For taller, put XX in front and add $118 list. Maximum worksurface height is ". > Installation hardware is included. > Polished aluminum feet with painted steel vertical columns and painted steel footer bars are available. See Step. > Routing holes are positioned in the center base. For routing holes in an end base, contact designteam@enwork.com. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. COORDINATING See pages for coordinating Sensation furniture. Sensation Y-leg base with Footer Bar and Levelers, for 3"D tables - base spread.75" LMYB37?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 3 x 7 top $15 LMYB38?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 3 x 8 top $183 LMYB39?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 3 x 9 top $111 Sensation Y-leg base with Footer Bar and Levelers, for "D tables - base spread " LMYB7?^ Y-Legs (includes two) w/ Footer Bar, levelers, for x 7 top $193 LMYB8?^ Y-Legs (includes two) w/ Footer Bar, levelers, for x 8 top $11 LMYB9?^ Y-Legs (includes two) w/ Footer Bar, levelers, for x 9 top $115 Sensation Y-leg base with Footer Bar and Levelers, for 8"D tables - base spread " LMYB87?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 8 x 7 top $193 LMYB88?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 8 x 8 top $11 LMYB89?^ Y-Legs (includes two) w/ Footer Bar, levelers, for 8 x 9 top $115 Notes TABLES STEP - SENSSATION Sensation Split Y-Leg Bases with Rectangle Footer Bar and Levelers 8-"D Tables LMY8?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 18 W top $81 LMY?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 1 W top $81 LMY3?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 13 W top $895 LMY?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 1 W top $95 LMY5?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 15 W top $393 LMY8?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 18 W top $393 LMY8?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 18 W top $35 LMY9?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 19 W top $139 LMYD?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x W top $139 LMY?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 1 W top $7 LMYD8?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x 8 W top $331 LMYD?^ Split Y-Leg w/ Rect. Footer Bar, levelers, for 8 - D x W top $331 Sensation Split Y-Leg Bases, package of two LMYE8?^ Split Y-Leg for 8 D table $1 LMYE?^ Split Y-Leg for D table $18 Tip: Two and three-piece tables also require a double T-Leg at the seams.

61 Solano T-Legs (formerly Captiva) Solano T-Leg Flip Tables (Complete Tables) (formerly Captiva) (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP - Legs w/ Casters Only (@) Caster Color Suffix List: B Black G Grey +$ STEP 3 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $5 list. For taller, put XX in front and add $8 list. Maximum worksurface height is " > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Solano T-Legs with Levelers, package of two LCATP18?^ T-Leg, levelers for 18 D table (1 spread) $558 LCATP?^ T-Leg, levelers for D table ( spread) $57 LCATP3?^ T-Leg, levelers for 3-3 D table ( spread) $ Solano T-Legs on Casters, package of two LCATPC18?@^ T-Leg, casters for 18 D table (1 spread) $3 LCATPC?@^ T-Leg, casters for D table ( spread) $ LCATPC3?@^ T-Leg, casters for 3-3 D table ( spread) $89 Solano T-Leg Folding with Levelers, package of two LCATPF18^ T-Leg Folding, levelers, for 18"D table $97 LCATPF^ T-Leg Folding, levelers, for "D table $981 LCATPF3^ T-Leg Folding, levelers, for 3"D table $987 Tip: Designed for tables wide and wider. designteam@enwork.com for other options. Solano T-Leg Folding with Casters, package of two LCATPFC18@^ T-Leg Folding, casters, for 18"D table $99 LCATPFC@^ T-Leg Folding, casters, for "D table $11 LCATPFC3@^ T-Leg Folding, casters, for 3"D table $18 Tip: Designed for tables wide and wider. designteam@enwork.com for other options. Leg Cable Management Covers LPCM^ Cable Management Cover for Leg with Leveler $57 LPCMC^ Cable Management Cover for Leg with Caster $57 LPCMA^ Cable Management Cover for Flip Table with Casters $57 > Angled leg tables nest in-line. Straight leg tables nest off-set. Nested, both leg styles have 7-1/ between front of one table to front of the next table. > Angled foot depth is approximately 1 for 18 D tables, 1.75 for D tables, and 5.5 for 3 D tables. Straight foot depth is approximately 1 for 18 D tables, for D tables, and for 3 D tables. > As of May 18, the Solano flip mechanism has changed. > Includes Top with 3mm edge or knife edge on user side. > Angled legs nest in-line. Straight legs nest off-set. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. 3mm Edge Laminate worksurface on Solano T-Leg (straight) Flip Base, 18 D LCRS188A^?@*# 18 D Solano Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $151 LCRS18A^?@*# 18 D Solano Straight T-Leg Flip Table W Top w/ 3mm Edge $155 LCRS187A^?@*# 18 D Solano Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $1737 LCRS189A^?@*# 18 D Solano Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $19 3mm Edge Laminate worksurface on Solano T-Leg (straight) Flip Base, D LCRS8A^?@*# D Solano Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $155 LCRSA^?@*# D Solano Straight T-Leg Flip Table W Top w/ 3mm Edge $19 LCRS7A^?@*# D Solano Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $1778 LCRS9A^?@*# D Solano Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $ 3mm Edge Laminate worksurface on Solano T-Leg (straight) Flip Base, 3 D LCRS38A^?@*# 3 D Solano Straight T-Leg Flip Table 8 W Top w/ 3mm Edge $18 LCRS3A^?@*# 3 D Solano Straight T-Leg Flip Table W Top w/ 3mm Edge $1798 LCRS37A^?@*# 3 D Solano Straight T-Leg Flip Table 7 W Top w/ 3mm Edge $19 LCRS39A^?@*# 3 D Solano Straight T-Leg Flip Table 9 W Top w/ 3mm Edge $1 3mm Edge Laminate worksurface on Solano T-Leg (angled) Flip Base LCRAA^?@*# D Solano Angled T-Leg Flip Table W Top w/ 3mm Edge $1753 LCRA7A^?@*# D Solano Angled T-Leg Flip Table 7 W Top w/ 3mm Edge $183 LCRA3A^?@*# 3 D Solano Angled T-Leg Flip Table W Top w/ 3mm Edge $185 LCRA37A^?@*# 3 D Solano Angled T-Leg Flip Table 7 W Top w/ 3mm Edge $191 Knife Edge (user side) Laminate worksurface on Solano T-Leg (straight) Flip Base, 18 D LCRS188K^?@*# 18 D Solano Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $1 LCRS18K^?@*# 18 D Solano Straight T-Leg Flip Table W Top w/ Knife Edge User Side $1783 LCRS187K^?@*# 18 D Solano Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $1879 LCRS189K^?@*# 18 D Solano Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $17 Knife Edge (user side)laminate worksurface on Solano T-Leg (straight) Flip Base, D LCRS8K^?@*# D Solano Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $1 LCRSK^?@*# D Solano Straight T-Leg Flip Table W Top w/ Knife Edge User Side $183 LCRS7K^?@*# D Solano Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $191 LCRS9K^?@*# D Solano Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $188 Knife Edge (user side) Laminate worksurface on Solano T-Leg (straight) Flip Base, 3 D LCRS38K^?@*# 3 D Solano Straight T-Leg Flip Table 8 W Top w/ Knife Edge User Side $178 LCRS3K^?@*# 3 D Solano Straight T-Leg Flip Table W Top w/ Knife Edge User Side $197 LCRS37K^?@*# 3 D Solano Straight T-Leg Flip Table 7 W Top w/ Knife Edge User Side $7 LCRS39K^?@*# 3 D Solano Straight T-Leg Flip Table 9 W Top w/ Knife Edge User Side $37 Knife Edge (user side) Laminate worksurface on Solano T-Leg (angled) Flip Base LCRAK^?@*# D Solano Angled T-Leg Flip Table W Top w/ Knife Edge User Side $188 LCRA7K^?@*# D Solano Angled T-Leg Flip Table 7 W Top w/ Knife Edge User Side $1979 LCRA3K^?@*# 3 D Solano Angled T-Leg Flip Table W Top w/ Knife Edge User Side $5 LCRA37K^?@*# 3 D Solano Angled T-Leg Flip Table 7 W Top w/ Knife Edge User Side $17 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP (?) Routing Hole Suffix List: N No routing hole in one leg Y Routing hole in one leg +$ Z Routing hole in two legs +$1 STEP 3 (@) Caster Color Suffix List: B Black G Grey +$ STEP (*) Cable Management Suffix List: N No Cable Management G Grommet (one, center rear) +$18 U Power/Data cut-out +$3 (one, center rear) X Other TBD STEP 5 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium +$3 laminates (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard +$5 (58, 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$7 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminates. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. TABLES STEP - SOLANO

62 1 11 Solano TT-Legs - Conference (formerly Captiva) (?) Routing Holes Suffix List N No routing holes in column Y Routing hole in one column +$ Z Routing holes in two columns +$1 STEP (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $5 list. For taller, put XX in front and add $8 list. Maximum worksurface height is ". > Installation hardware is included. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Solano TT-Leg with Levelers, package of one LCATP8?^ TT-Leg, levelers for D or 8 D table (3 spread) $9 LCATP?^ TT-Leg, levelers for D table ( spread) $73 Tip: The 8 leg top plates are apart and therefore cannot receive power/data units between them. TABLES STEP - SOLANO STEP 3 - TT-Leg Filler Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +$ Y *Formica Non-Premium (includes 58, 3, +$9 MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non- Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than1 units. See page 1 for edge selection. Solano TT-Leg with Levelers and Laminate Filler, package of one LCATPL8?^# TT-Leg, levelers, laminate filler for D or 8 D table (3 spread) $88 LCATPL?^# TT-Leg, levelers, laminate filler for D table ( spread) $87 Tip: A center power/data location on a -piece table is not possible due to interference with the laminate filler panel on the leg (a leg is typically shared at the seam of the pieces). Tip: TT-Leg with filler cannot accept the cable management cover. Solano TT-Leg with Levelers and Veneer Filler, package of one LCATPV8?^# TT-Leg, levelers, veneer filler for D or 8 D table (3 spread) $1 LCATPV?^# TT-Leg, levelers, veneer filler for D table ( spread) $19 Tip: A center power/data location on a -piece table is not possible due to interference with the laminate filler panel on the leg (a leg is typically shared at the seam of the pieces). Tip: TT-Leg with filler cannot accept the cable management cover. Notes (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee)

63 1 13 Solano C-Legs (formerly Captiva) (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP - Legs w/ Casters Only (@) Caster Color Suffix List: B Black G Grey +$ STEP 3 (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $5 list. For taller, put XX in front and add $8 list. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > Installation hardware is included. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Solano C-Leg with Levelers, package of two LCACP18?^ C-Leg, levelers, for 18 D table (1 spread) $558 LCACP?^ C-Leg, levelers, for D table ( spread) $57 LCACP3?^ C-Leg, levelers, for 3 D table ( spread) $ Solano C-Leg with Casters, package of two LCACPC18?@^ C-Leg, casters, for 18 D table (1 spread) $3 LCACPC?@^ C-Leg, casters, for D table ( spread) $ LCACPC3?@^ C-Leg, casters, for 3 D table ( spread) $89 Solano Set-Screw Adjustable C-Leg Base Assembly with Levelers for 18"D Tables (1" spread) LCAACP188?^ Set-Screw C-Leg base assembly, levelers, for 18 D x 8 W top $95 LCAACP18?^ Set-Screw C-Leg base assembly, levelers, for 18 D x W top $95 LCAACP187?^ Set-Screw C-Leg base assembly, levelers, for 18 D x 7 W top $95 Tip: Height range is 9"-3" with 1.5" increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Solano C-Leg Base Assembly with Powerlex Modesty and Levelers, for "D tables (" spread) LCACP81^ C-Leg Base with Powerlex Modesty, Levelers for D x 8 W top, Circuit 1 $1 LCACP1^ C-Leg Base with Powerlex Modesty, Levelers for D x W top, Circuit 1 $1353 LCACP71^ C-Leg Base with Powerlex Modesty, Levelers for D x 7 W top, Circuit 1 $15 LCACP8^ C-Leg Base with Powerlex Modesty, Levelers for D x 8 W top, Circuit $1 LCACP^ C-Leg Base with Powerlex Modesty, Levelers for D x W top, Circuit $1353 LCACP7^ C-Leg Base with Powerlex Modesty, Levelers for D x 7 W top, Circuit $15 Tip: Powerlex Modesty includes -wire power system, duplex receptacles, data openings and jumpers. Tip: See page 1 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $3 from the list price and put a Z in front of the part number. Tip: Specify Base Power-In (see below). Solano C-Leg Base Assembly with Powerlex Modesty and Levelers, for 3"D tables LCACP381^ C-Leg Base with Powerlex Modesty, Levelers for 3 D x 8 W top, Circuit 1 $13 LCACP31^ C-Leg Base with Powerlex Modesty, Levelers for 3 D x W top, Circuit 1 $138 LCACP371^ C-Leg Base with Powerlex Modesty, Levelers for 3 D x 7 W top, Circuit 1 $153 LCACP38^ C-Leg Base with Powerlex Modesty, Levelers for 3 D x 8 W top, Circuit $13 LCACP3^ C-Leg Base with Powerlex Modesty, Levelers for 3 D x W top, Circuit $138 LCACP37^ C-Leg Base with Powerlex Modesty, Levelers for 3 D x 7 W top, Circuit $153 TABLES STEP - SOLANO Solano Set-Screw Adjustable C-Leg Base Assembly with Levelers for "D Tables (" spread) LCAACP8?^ Set-Screw C-Leg base assembly, levelers, for D x 8 W top $978 LCAACP?^ Set-Screw C-Leg base assembly, levelers, for D x W top $978 LCAACP7?^ Set-Screw C-Leg base assembly, levelers, for D x 7 W top $978 Tip: Height range is 9"-3" with 1.5" increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Tip: Powerlex Modesty includes -wire power system, duplex receptacles, data openings and jumpers. Tip: See page 1 for Powerlex Grommet option, which can be specified in table top (strongly recommended). Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $3 from the list price and put a Z in front of the part number. Tip: Specify Base Power-In (see below). Solano Set-Screw Adjustable C-Leg Base Assembly with Levelers for 3"D Tables (" spread) LCAACP38?^ Set-Screw C-Leg base assembly, levelers, for 3 D x 8 W top $18 LCAACP3?^ Set-Screw C-Leg base assembly, levelers, for 3 D x W top $18 LCAACP37?^ Set-Screw C-Leg base assembly, levelers, for 3 D x 7 W top $18 Tip: Height range is 9"-3" with 1.5" increments (including top). Tip: Set-Screw Adjustable legs cannot accept the cable management cover. Base Power-Ins A8BP7 Base Power-In for Hardwire, 7 $18 A8BP1 Base Power-In for Hardwire, 1 $3 A1BP7 Base Power-In for RA Plug Circuit 1 (only), 7 $39 Tip: Use hardwire in feeds if UL listed (not recognized) is required. Tip: Infeeds have a amp plug end which requires a amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek Amp to -Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses. 15 amp Receptacle amp Receptacle Routing Hole Covers WCVRB Routing Hole Cover, Black $ WCVRS Routing Hole Cover, Silver $ WCVRT Routing Hole Cover, Medium Tone $ Tip: Powerlex tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.

64 1 15 Solano X-Bases (formerly Captiva) - -Post X-Base Only (?) Routing Holes Suffix List N No routing holes in leg Y Routing hole in one leg +$ Z Routing holes in two legs +$1 STEP (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. STEP 3 - Legs w/ Casters Only (@) Caster Color Suffix List: B Black G Grey +$ - Infill Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +$ Y *Formica Non-Premium (includes 58, 3, +$9 MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Standard height is For shorter heights put X in front of the part number and add $5 list ($18 for a -post x-base). For taller steel legs, put XX in front and add $8 list ($13 for a -post x-base). Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Solano X-Bases with Levelers LCAXPA^ X-base, levelers, for round top ( x spread) $ LCAXPB^ X-base, levelers, for 3-3 round or -3 sq top ( x spread) $7 LCAXPC^ X-base, levelers, for round or 3 sq top (3 x 3 spread) $88 LCAXPD^ X-base, levelers, for 8 round or sq top (38 x 38 spread) $7 Solano -Post X-Base with Levelers LCAXPE?^ -Post X-Base, levelers, for 5-8 Round Top $193 LXPEF# Laminate Infill (no door) for LCAXPE $13 LXPENFD# Laminate Infill (with door) for LCAXPE $117 Solano X-Bases with Levelers - Bar Height LCAXPBBA^ X-base, bar height, levelers, for round top ( x spread) $715 LCAXPBBB^ X-base, bar height, levelers, for 3-3 round or - 3 sq top $77 ( x spread) LCAXPBBC^ X-base, bar height, levelers, for round or 3 sq top $7 (3 x 3 spread) LCAXPBBD^ X-base, bar height, levelers, for 8 round or sq top $757 (38 x 38 spread) Solano -Post X-Base with Levelers - Bar Height LCAXPBE?^ -Post X-base, bar height, levelers, for 5-7 round top $1793 (8 x 8 spread) LCAXPBEF# Laminate Infill (no door) for LCAXPBE (bar height) $1313 LCAXPBENFD# Laminate Infill (with door) for LCAXPBE (bar height) $153 Solano X-Bases with Casters LCAXPAC^@ X-base, casters, for round top ( x spread) $771 LCAXPBC^@ X-base, casters, for 3-3 round or -3 sq top ( x spread) $785 LCAXPCC^@ X-base, casters, for round or 3 sq top (3 x 3 spread) $799 LCAXPDC^@ X-base, casters, for 8 round or sq top (38 x 38 spread) $81 Solano X-Bases with Power/Data Top Plate and Levelers LCAX3PA^ X-Base w/ P/D Top Plate, Levelers, for round top ( x spread) $79 LCAX3PB^ X-Base w/ P/D Top Plate, Levelers, for 3-3 round or -3 sq top ( x spread) $783 LCAX3PC^ X-Base w/ P/D Top Plate, Levelers, for round or 3 sq top (3 x 3 spread) $798 LCAX3PD^ X-Base w/ P/D Top Plate, Levelers, for 8 round or sq top (38 x 38 spread) $89 Tip: Includes hole in bottom of leg for cable management and special top plate that allows room for power/data in center of top. Tip: Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units. Solano X-Bases with Power/Data Top Plate and Levelers - Bar Height LCAX3PBBA^ X-base w/ P/D Top Plate, bar height, levelers, for round top ( x spread) $85 LCAX3PBBB^ X-base w/ P/D Top Plate, bar height, levelers, for 3-3 round or -3 sq top ( x spread) $88 LCAX3PBBC^ X-base w/ P/D Top Plate, bar height, levelers, for round or 3 sq top (3 x 3 spread) $853 LCAX3PBBD^ X-base w/ P/D Top Plate, bar height, levelers, for 8 round or sq top (38 x 38 spread) $85 Tip: Includes hole in bottom of leg for cable management and special top plate that allows room for power/data in center of top. Tip: Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units. Solano X-Bases with Power/Data Top Plate and Casters LCAX3PAC^@ X-Base with P/D Top Plate, casters, for round top ( x spread) $877 LCAX3PBC^@ X-Base with P/D Top Plate, casters, for 3-3 round or -3 sq top ( x spread) $89 LCAX3PCC^@ X-Base with P/D Top Plate, casters, for round or 3 sq top (3 x 3 spread) $9 LCAX3PDC^@ X-Base with P/D Top Plate, casters, for 8 round or sq top (38 x 38 spread) $919 Tip: Includes hole in bottom of leg for cable management and special top plate that allows room for power/data in center of top. Tip: Top plate can accommodate the Flip-n-Go, Villa, Cove, and Single-Sided Ellora power data units. TABLES STEP - SOLANO Solano -Post X-Base with Casters LCAXPEC?^@ -Post X-Base, casters, for 5-8 Round Top $18

65 1 17 Solano Fast Crank & Crank Height-Adjustable Bases (formerly Captiva) Solano VT Electric Height-Adjustable Bases - Fast Crank Only (^) Paint Suffix List S Silver R Black W Arctic White Tip: Other colors available with longer lead times. Contact designteam@enwork.com for details. - Crank Only (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. Fast Crank > Height adjustment range of - high (with top). > Adjusts turns per inch. > 11 lbs load capacity when moving, 1 lbs when static. (Load capacity includes weight of worksurface.) > Typically ships in 8 hours. > Installation hardware is included. > Tops ordered separately. > Ships unassembled. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Solano -Legged Fast Crank Adjustment C-Leg Base Assemblies for Rectangle Tables LVTCRR^ -Leg Fast Crank Base, Levelers, for /3 D rectangle table $1 Tip: For use on 8-7 wide rectangle tops (adjustable cross bar). LVTC Caster Kit, casters, 1.5 H $58 Tip: On bases with casters, the height adjustment range changes to > lbs load capacity for -legged base. lbs load capacity for 3-legged base. (Load capacity includes weight of worksurface.) > Individual Bosch electric motor for each leg. > Adjusts up to 1. inch/second. > Adjusts via included up/down controller (no display). > Crossbars do not fully connect from leg to leg on 3-leg bases. Brackets are included to allow for 9- or 1-degree applications. > Typically ships in 8 hours. > Installation hardware is included. > Tops sold separately. > Ships unassembled. > Optional programmable handset with digital display available. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Solano VT Electric Adjustment C-Leg BIFMA Range Base Assembly with Levelers for Rectangle Tables LVTERBAS VT -Leg, -stage (3-tube) Electric Base, Levelers, for /3 D rectangle table, Silver $13 LVTERBAW VT -Leg, -stage (3-tube) Electric Base, Levelers, for /3 D rectangle table, Arctic White $13 Tip: For use on 8-7 wide rectangle tops. Tip: BIFMA height adjustment range of high (with top). Solano VT Electric Adjustment C-Leg Sit/Stand Base Assembly with Levelers for Rectangle Tables LVTERJJS VT -Leg, 1-stage (-tube) Electric Base, Levelers, for /3 D rectangle table, Silver $11 LVTERJJW VT -Leg, 1-stage (-tube) Electric Base, Levelers, for /3 D rectangle table, Arctic White $11 Tip: For use on 8-7 wide rectangle tops. Tip: Sit/Stand height adjustment range of 9-9 high (with top). TABLES STEP - SOLANO Solano Crank Adjustment C-Leg Base Assemblies with Levelers for Rectangular Tables LCAER^ Crank C-Leg Base for x 8-7 W Table (foot depth is ) $179 LCAER3^ Crank C-Leg Base for 3 x 8-7 W Table (foot depth is ) $1795 Tip: Adjustment range is 7" to 5" (including top). Five and a half cranks per inch. Tip: For shorter widths (3 - ) put a W in front of the part number. For longer widths (78-9 ) put a Z in front of the part number. Solano Crank Adjustment C-Leg Base Assemblies with Casters for Rectangular Tables LCAERC^ Crank C-Leg Base for x 8-7 W Table (foot depth is ) $189 LCAERC3^ Crank C-Leg Base for 3 x 8-7 W Table (foot depth is ) $187 Tip: Adjustment range is 7" to 5" (including top). Five and a half cranks per inch. Tip: For shorter widths (3 - ) put a W in front of the part number. For longer widths (78-9 ) put a Z in front of the part number. Solano Crank Adjustment -Legged C-Leg Base Assembly with Levelers for Corner Tables LCAEC^ Crank -Leg, C-Leg Base for D corner table (foot depth is ) $17 Tip: Five and a half cranks per inch. Solano VT Electric Adjustment 3-Legged C-Leg Base Assembly with Levelers for 9- or 1- workstations LVTETTBAS VT 3-Leg, -stage (3-tube) Electric Base, Levelers, for /3 D 9- or 1-degree Table, Silver $1779 Tip: For use on tops 3-7 wide. Crossbars do not fully connect from leg to leg. Brackets are included to allow for 9- or 1-degree applications. Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. Solano VT LogicData Programmable Controller with Range Limiting Capability (Optional) LVTSWITCH Programmable Controller for VT bases, black $7 Tip: Controller allows three preset programmable stops. Solano Crank Adjustment 3-Legged C-Leg Base Assembly with Levelers for 1-Degree Tables LCAET^ Crank 3-Leg, C-Leg Base for x x 8 x 8 top (foot depth is ) $877 Tip: Adjustment range is 8.5" to.5" (including top). Five and a half cranks per inch. Solano Crank Adjustment 3-Legged C-Leg Base Assembly with Levelers for L-Workstations LCAEL^ Crank 3-Leg, C-Leg Base for x x 7 x 7 $8 9 degree top (foot depth is ") Tip: Adjustment range is 8.5" to.5" (including top). Five and a half cranks per inch.

66 (formerly Captiva) Solano VT-Series Extended Range Electric Adjustable Bases (formerly Captiva) Solano XT-Series ANSI/BIFMA Electric Height-Adjustable Bases (^) Paint Suffix List S Silver R Black W Arctic White Tip: Other colors available with longer lead times. Contact designteam@enwork.com for details. > lbs load capacity for -legged base. lbs load capacity for 3-legged base. (Load capacity includes weight of worksurface.) > Bosch electric motor present in each leg. > Adjusts 1. inch/second. > Includes programmable handset with 3 preset buttons and Logic Data controller with range limiting capability. > Height adjustment range of high (with top). > Installation hardware is included. > Tops sold separately. > Ships unassembled. > Some products may be available for quick ship. Contact info@enwork.com. > Silver, black, and arctic white typically ship in 8 hours. Additional colors available in 7-8 weeks. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. > 5 pound load capacity. > Bosch electric motor present in each leg. > Adjusts up to 1. inch/second. > Adjusts via included up/down controller (no display). > Height adjustment range of high (with top). Meets ANSI/BIFMA specifications. > Bases are -stage (3-tube). > Installation hardware is included. > Tops sold separately. > Ships unassembled. > Available as a -leg and 3-leg model as standard (-leg as special). > Optional programmable digital display available on next page. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. TABLES STEP - SOLANO Solano VT-Series -Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assemblies for Rectangle Tables LVTER^ VT -Leg, -stage (3-tube) Electric Base, Levelers, for $1555 /3 D rectangle table Tip: For use on 8-7 wide rectangle tops (adjustable cross bar). LVTC Caster Kit, casters, 1.5 H $58 Tip: On bases with casters, the height adjustment range changes to LVTLB Cross Bar Kit for 8-9 W Tables $7 Solano XT-Series -Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assemblies for Rectangle Tables LCAER^ XT -Leg, -stage (3-tube) Electric Base, Levelers, for D rectangle table $18 LCAER3^ XT -Leg, -stage (3-tube) Electric Base, Levelers, for 3 D rectangle table $ LCAERC^ XT -Leg, -stage (3-tube) Electric Base, Casters, for D rectangle table $77 LCAERC3^ XT -Leg, -stage (3-tube) Electric Base, Casters, for 3 D rectangle table $73 Tip: For use on 8-7 wide rectangle tops (adjustable cross bar). Tip: For shorter widths (3"-") put a "W" in front of the part number. For longer widths (78"-9") put a "Z" in front of the part number. Tip: On bases with casters, the height range changes to.1-9.8, not ANSI/BIFMA. (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. Solano VT-Series 3-Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assemblies for L-Workstations LVTEL^ VT 3-Leg, -stage (3-tube) Electric Base, for $ /3 D L-Workstation table Solano XT-Series -Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assemblies for Corner Tables LCAEC^ XT -Leg, -stage (3-tube) Electric Base for D corner table $37 Tip: For use on "D tops, - 8 wide corners only (adjustable cross bar). Tip: For use on tops - 78 wide (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. Solano XT-Series -Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assembly w/ Angled Feet & Levelers for 1-Degree Tables LCAEJ^ XT -Leg, -stage (3-tube) Electric Base, angled feet, for 1-Degree table $89 Solano VT-Series 1-Degree Table Bracket LVTETR 1-Degree Bracket $15 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). Tip: For use with tops 8 x8 or x wide. Tip: Bracket converts 3-Legged C-Leg base for L-workstations (ordered above) to 1 degree applications. Solano XT-Series 3-Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assemblies for 1-Degree Tables LCAET^ XT 3-Leg, -stage (3-tube) Electric Base, for 1-Degree table $13 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. Solano XT-Series 3-Legged, -Stage (3-tube) Electric Adjustment C-Leg Base Assemblies for L-Workstations LCAEL^ XT 3-Leg, -stage (3-tube) Electric Electric Base, for L-Workstation $91 Tip: For use on "D tops, 8-7 wide (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com.

67 (formerly Captiva) Solano XT-Series Sit/Stand Electric Height-Adjustable Bases (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > 5 pound load capacity. > Adjusts via included up/down controller (no display). > Adjustment range is - 5 (including top). > Bases are 1-stage (-tube). > Installation hardware is included. > Tops sold separately. > Ships unassembled. > Optional controller with digital display available. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Solano XT-Series -Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assemblies for Rectangle Tables LCAER^ XT -Leg, 1-Stage (-tube) Electric Base, Levelers, for D rectangle table $31 LCAER3^ XT -Leg, 1-Stage (-tube) Electric Base, Levelers, for 3 D rectangle table $58 LCAERC^ XT -Leg, 1-Stage (-tube) Electric Base, Casters, for D rectangle table $51 LCAERC3^ XT -Leg, 1-Stage (-tube) Electric Base, Casters, for 3 D rectangle table $535 Tip: For use on 8-7 wide rectangle tops (adjustable cross bar). Tip: For shorter widths (3"-") put a "W" in front of the part number. For longer widths (78"-9") put a "Z" in front of the part number. Tip: On bases with casters, the height range changes to Notes TABLES STEP - SOLANO Solano XT-Series -Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly for Corner Tables LCAEC^ XT -Leg, 1-Stage (-tube) Electric Base for D corner table $5 Tip: For use on "D tops, - 8 wide corners only (adjustable cross bar). Solano XT-Series -Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly with Angled Feet & Levelers for 1-Degree Tables LCAEJ^ XT -Leg, 1-Stage (-tube) Electric Base, angled feet, for 1-Degree table $87 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). Solano XT-Series 3-Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly for 1-Degree Tables LCAET^ XT 3-Leg, 1-Stage (-tube) Electric Base, for 1-Degree table $3811 Tip: For use on "D tops, 3-8 wide per side (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. Solano XT-Series 3-Legged, 1-Stage (-tube) Electric Adjustment C-Leg Base Assembly for L-Workstations LCAEL^ XT 3-Leg, 1-Stage (-tube) Electric Electric Base, for L-Workstation $3739 Tip: For use on "D tops, 8-7 wide (adjustable cross bar). Tip: For shorter or longer widths on 3-legged bases, contact designteam@enwork.com. XT-Series Controller with Digital Read-Out Display (Optional) LFADD Controller, Digital Display, for XT-Series bases, black $15

68 (formerly Captiva) Solano Classroom Tables (Complete Tables) & Power Kits (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Inner and outer back panels are steel > Tops are Laminate with a 3mm edge > Monitor lifts accept monitors that adhere to the VESA Mounting Standard > Contains storage for keyboards and mouse with monitor. Monitor storage is released by pushing down on top. > Includes a cable trough in the bottom for plug strips or hardwire power. > Includes cable management kit. > Worksurface included. > Ships assembled. > See maximum monitor sizes (diagonal measurement) below. For larger sizes designteam@enwork.com. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. TABLES STEP - SOLANO STEP 3 A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium Laminates +$3 (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium (includes 58, +$5 3, MC, SP, and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$7 Non-Premium, Formica Premium (WR,, 77,, RD finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. Solano Classroom Tables with Levelers LCACP33^# Classroom Table, 3"D x 3"W $1789 Tip: Minimal room underneath table for CPU holder - affects kneespace. LCACP33^# Classroom Table, 3"D x 3"W $1885 Tip: Room exists underneath table for two CPU holders. (ordered separately) LCACP3^# Classroom Table, 3"D x "W $57 Tip: Minimal room underneath table for CPU holder - affects kneespace. LCACP37^# Classroom Table, 3"D x 7"W $3185 Tip: Room exists underneath table for two CPU holders. (ordered separately) Solano Classroom Tables with Monitor Lift(s) and Levelers LCACM33^# Classroom Table with Single Monitor Lift, 3"D x 3"W $31 Tip: Works with most flat screens, 3 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace. LCACM33^# Classroom Table with Single Monitor Lift, 3"D x 3"W $3357 Tip: Works with most flat screens, 5 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately) LCACM3^# Classroom Table with Double Monitor Lift, 3"D x "W $5777 Tip: Works with most flat screens, 3 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Minimal room underneath table for CPU holder - affects kneespace. LCACM37^# Classroom Table with Double Monitor Lift, 3"D x 7"W $5935 Tip: Works with most flat screens, 5 diagonal monitor or smaller. Maximum monitor weight is lbs. Tip: Room exists underneath table for two CPU holders. (ordered separately) Classroom Table Power Kits (Optional) LCMP13 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, circuit 1 $1 LCMP13 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, circuit 1 $5 LCMP1 Kit for W Classroom Table, duplex receptacles, no data, two jumpers, circuit 1 $87 LCMP17 Kit for 7 W Classroom Table, duplex receptacles, no data, two jumpers, circuit 1 $3 LCMP3 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, circuit $1 LCMP3 Kit for 3 W Classroom Table, duplex receptacles, no data, two jumpers, circuit $5 LCMP Kit for W Classroom Table, duplex receptacles, no data, two jumpers, circuit $87 LCMP7 Kit for 7 W Classroom Table, duplex receptacles, no data, two jumpers, circuit $3 Solano Classroom Tables with Single Laptop Storage and Powerlex Modesty LCALAP31^# Classroom Table w/ Powerlex, Single Laptop Storage, for D x 3 W Tables, Circuit 1 $3 LCALAP3^# Classroom Table w/ Powerlex, Single Laptop Storage, for D x 3 W Tables, Circuit $3 Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $3 from the list price and put a "Z" in front of the part number. Solano Classroom Tables with Double Laptop Storage and Powerlex Modesty LCALAP71^# Classroom Table w/ Powerlex, Double Laptop Storage, for D x 7 W Tables, Circuit 1 $371 LCALAP7^# Classroom Table w/ Powerlex, Double Laptop Storage, for D x 7 W Tables, Circuit $371 Tip: If you would like to order a non-powered version (just modesty with trough and legs) subtract $3 from the list price and put a "Z" in front of the part number. Base Power-Ins A8BP7 Base Power-In for Hardwire, 7 $18 A8BP1 Base Power-In for Hardwire, 1 $3 A1BP7 Base Power-In for RA Plug Circuit 1 (only), 7 $39 Tip: Use hardwire in feeds if UL listed (not recognized) is required. Tip: Infeeds have a amp plug end which requires a amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek Amp to -Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses. Routing Hole Covers 15 amp Receptacle amp Receptacle WCVRB Routing Hole Cover, Black $ WCVRS Routing Hole Cover, Silver $ WCVRT Routing Hole Cover, Medium Tone $ Tip: Classroom tables have routing holes on the inside of each foot as well as on the outside of each column where power is run from table to table. Routing hole covers can be ordered to cover any unused holes in the foot or at the end of a run.

69 Statement Table Bases Filler Suffix List: A Open (No Filler) No Charge B Acrylic Filler +$31 C Glass Filler, acid-etched w/ pattern +$7 STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, +$3 -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +$5 MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +$7 Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Thickness of Birch ply on base is.75. > Bases include steel tube interior structure for cable management within the base. > Statement tops ordered separately. See pages -9. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Description List Price (US$) Laminate Statement Conference Table Bases with Exposed Plied Core and levelers (package of one) 18 LK18LP@# 18 Base, Exposed Plied Core, for use on 3 / D table $159 LKLP@# Base, Exposed Plied Core, for use on 8 D table $15 3 LK3LP@# 3 Base, Exposed Plied Core, for use on 5 D table $ LK3LP@# 3 Base, Exposed Plied Core, for use on D table $1775 Laminate (all sides) Statement Conference Table Bases with levelers (package of one) 18 LK18LA@# 18 Base, Laminate all sides, for use on 3 / D table $11 LKLA@# Base, Laminate all sides, for use on 8 D table $17 3 LK3LA@# 3 Base, Laminate all sides, for use on 5 D table $171 3 LK3LA@# 3 Base, Laminate all sides, for use on D table $187 Veneer Statement Conference Table Bases with Exposed Plied Core and levelers (package of one) 18 LK18VP@# 18 Base, Veneer w/ Exposed Plied Core, for use on 3 / D table $191 LKVP@# Base, Veneer w/ Exposed Plied Core, for use on 8 D table $8 3 LK3VP@# 3 Base, Veneer w/ Exposed Plied Core, for use on 5 D table $39 3 LK3VP@# 3 Base, Veneer w/ Exposed Plied Core, for use on D table $57 Notes TABLES STEP - STATEMENT (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple Laminate) J Cherry (stained similar to Wild Cherry Laminate) N Walnut (stained similar to Cafelle Laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) Veneer (all sides) Statement Conference Table Bases with levelers (package of one) 18 LK18VA@# 18 Base, Veneer all sides, for use on 3 / D table $33 LKVA@# Base, Veneer all sides, for use on 8 D table $ 3 LK3VA@# 3 Base, Veneer all sides, for use on 5 D table $5 3 LK3VA@# 3 Base, Veneer all sides, for use on D table $

70 Stealth Conference Base & Beam Assemblies Filler List: A Flat Filler - Standard Laminate B Flat Filler - Standard Veneer L Flat Filler - Standard Laminate with Luminesse LED option (for use w/ Non-Luminesse Top) M Flat Filler - Standard Laminate with Luminesse LED option (for use w/ Luminesse Top) Tip: Fillers are aesthetic treatments on the front and back of panel bases. STEP (Filler A Only) A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +$ (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, +$8 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$3 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Trim is clear anodized aluminum. > Panel Bases are 5-3/1 W > Luminesse LED lighting option only available on seated height bases. > Two power supplies are provided with bases up t o15 W. 18 W and larger come with three power supplies. > Luminesse option uses UL Certified electrical components. > Product is base and beam kit only. Table top specified separately. > Bases include cable management and cable grippers. > Trough covers are available to conceal equipment and hide wiring & cabling. See chart on page 158. > Kit includes aluminum mitered structural cross beams. > Base and Beam kits ship partially assembled. > If ordered with Luminesse LED top, fewer power supplies are required and provided. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. FLAT FILLER FLAT FILLER STANDARD STANDARD LAMINATE VENEER Part Number Description Suffix A Suffix B Stealth Base and Beam Assemblies for 3 / D Tables - Seated Height (9"H) LY3AA@# Seated Base Assembly for 3/ D x 7-8 W table $37 $587 LY3BA@# Seated Base Assembly for 3/ D x 9-18 W table $17 $1 LY3CA@# Seated Base Assembly for 3/ D x 1 W table $531 $79 LY3DA@# Seated Base Assembly for 3/ D x 13 W table $531 $79 LY3EA@# Seated Base Assembly for 3/ D x 1 W table $531 $79 LY3FA@# Seated Base Assembly for 3/ D x 15 W table $531 $79 LY3GA@# Seated Base Assembly for 3/ D x 18/18/19 W table $838 $1,57 LY3HA@# Seated Base Assembly for 3/ D x -1 W table $8531 $11,1 LY3IA@# Seated Base Assembly for 3/ D x 8 - W table $8531 $11,1 Stealth Base and Beam Assemblies for 8 D Tables - Seated Height (9"H) LY8AA@# Seated Base Assembly for 8 D x 7-8 W table $17 $79 LY8BA@# Seated Base Assembly for 8 D x 9-18 W table $781 $91 LY8CA@# Seated Base Assembly for 8 D x 1 W table $531 $79 LY8DA@# Seated Base Assembly for 8 D x 13 W table $531 $79 LY8EA@# Seated Base Assembly for 8 D x 1 W table $531 $79 LY8FA@# Seated Base Assembly for 8 D x 15 W table $531 $79 LY8GA@# Seated Base Assembly for 8 D x 18/18/19 W $838 $1,57 LY8HA@# Seated Base Assembly for 8 D x -1 W table $8531 $11,1 LY8IA@# Seated Base Assembly for 8 D x 8- W table $8531 $11,1 LAMINATE FILLER LAMINATE FILLER W/ LUMINESSE W/ LUMINESSE LED LIGHTING LED LIGHTING (FOR USE w/ (FOR USE w/ NON-LUMINESSE TOP) LUMINESSE TOP) SEE PG. FOR Part Number Suffix L Suffix M LY3AA@# $5 $581 LY3BA@# $535 $111 LY3CA@# $7171 $815 LY3DA@# $7171 $815 LY3EA@# $7171 $815 LY3FA@# $7171 $815 LY3GA@# $98 $98 LY3HA@# $1,78 $1,33 LY3IA@# $1,78 $1,33 LY8AA@# $535 $111 LY8BA@# $7 $7 LY8CA@# $7171 $815 LY8DA@# $7171 $815 LY8EA@# $7171 $815 LY8FA@# $7171 $815 LY8GA@# $98 $98 LY8HA@# $1,78 $1,33 LY8IA@# $1,78 $1,33 COORDINATING See page 19 for coordinating Stealth Credenzas. See pages -3 for Luminesse LED Top option. TABLES STEP - STEALTH (#) Veneer Suffix List: (Filler B Only) D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) Stealth Base and Beam Assemblies for 5 D Tables - Seated Height (9"H) LY5AA@# Seated Base Assembly for 5 D x 7-8 W table $587 $798 LY5BA@# Seated Base Assembly for 5 D x 9-18 W table $3 $8138 LY5CA@# Seated Base Assembly for 5 D x 1 W table $577 $87 LY5DA@# Seated Base Assembly for 5 D x 13 W table $577 $87 LY5EA@# Seated Base Assembly for 5 D x 1 W table $577 $87 LY5FA@# Seated Base Assembly for 5 D x 15 W table $577 $87 LY5GA@# Seated Base Assembly for 5 D x 18/18/19 W table $988 $1,5 LY5HA@# Seated Base Assembly for 5 D x -1 W table $1,98 $1,951 LY5IA@# Seated Base Assembly for 5 D x 8- W table $1,98 $1,951 LY5AA@# $771 $731 LY5BA@# $788 $7 LY5CA@# $815 $7995 LY5DA@# $815 $7995 LY5EA@# $815 $7995 LY5FA@# $815 $7995 LY5GA@# $11,7 $11,35 LY5HA@# $1,59 $1,18 LY5IA@# $1,75 $1,18 Stealth Base and Beam Assemblies for D Tables - Seated Height (9"H) LYAA@# Seated Base Assembly for D x 7-8 W table $587 $798 LYBA@# Seated Base Assembly for D x 9-18 W table $3 $8138 LYCA@# Seated Base Assembly for D x 1 W table $577 $87 LYDA@# Seated Base Assembly for D x 13 W table $577 $87 LYEA@# Seated Base Assembly for D x 1 W table $577 $87 LYFA@# Seated Base Assembly for D x 15 W table $577 $87 LYAA@# $771 $731 LYBA@# $788 $7 LYCA@# $815 $7995 LYDA@# $815 $7995 LYEA@# $815 $7995 LYFA@# $815 $7995 LYGA@# Seated Base Assembly for D x 18/18/19 W table $988 $1,5 LYHA@# Seated Base Assembly for D x -1 W table $1,98 $1,951 LYIA@# Seated Base Assembly for D x 8- W table $1,98 $1,951 LYGA@# $11,7 $11,35 LYHA@# $1,75 $1,18 LYIA@# $1,75 $1,18

71 Stealth Conference Base & Beam Assemblies Filler List: A Flat Filler - Standard Laminate B Flat Filler - Standard Veneer Tip: Fillers are aesthetic treatments on the front and back of panel bases. STEP (Step 1: Filler A Only) A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +$ (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, +$8 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar +$3 Non-Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: (Step 1: Filler B Only) D Maple (stained similar to Wilsonart Kensington Maple laminate) J Cherry (stained similar to Wilsonart Wild Cherry laminate) N Walnut (stained similar to Wilsonart Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Trim is clear anodized aluminum. > Panel Bases are 5 3/1 W > Product is base and Beam kit only. Table top specified separately. > Bases include cable management inner panel that slides up/down and cable grippers. > Kit includes aluminum mitered structural cross beams. > Base and Beam kits ship partially assembled. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. COORDINATING See page 19 for coordinating Stealth Credenzas. FLAT FILLER FLAT FILLER STANDARD STANDARD LAMINATE VENEER Part Number Description Suffix A Suffix B Stealth Base and Beam Assemblies for 8 D Tables - Standing Height ("H) LY8AB@# Standing Base Assembly for 8 D x 7-8 W table $531 $7 LY8BB@# Standing Base Assembly for 8 D x 9-18 W table $581 $783 LY8CB@# Standing Base Assembly for 8 D x 1 W table $ $8338 LY8DB@# Standing Base Assembly for 8 D x 13 W table $ $8338 LY8EB@# Standing Base Assembly for 8 D x 1 W table $ $8338 Stealth Base and Beam Assemblies for D Tables - Standing Height ("H) LYAB@# Standing Base Assembly for D x 7-8 W table $57 $8889 LYBB@# Standing Base Assembly for D x 9-18 W table $73 $891 LYCB@# Standing Base Assembly for D x 1 W table $78 $99 LYDB@# Standing Base Assembly for D x 13 W table $78 $99 LYEB@# Standing Base Assembly for D x 1 W table $78 $99 Stealth Sliding Trough Covers* (See chart for maximum ordering quantities) LYTCV18 One trough cover for use with bases for 3 / D tables, silver $8 Tip: Trough covers for 3 / D tables are compatible with select power data units. For details, contact designteam@enwork.com. LYTCV One trough cover for use with bases for 8 D tables, silver $9 LYTCV3 One trough cover for use with bases for 5 D tables, silver $11 LYTCV3 One trough cover for use with bases for D tables, silver $19 *Stealth Sliding Trough covers for concealing Power/Data under Stealth conference tables: Top Width Max # of Trough Covers Notes TABLES STEP - STEALTH or ^ or 3^ or 3^ 3 5^ 5 ^ or 7^ 7^ 7^ 8^ (Trough covers are "W) ^ Covers will overlap to completely cover gaps.

72 1 11 Stealth Team Tables (Complete Tables) - Tables on This Page Only (@) Cable Management Suffix List: N No Cable Management No charge G Grommet (one, center) +$18 K One Power/Data Cut-out, Centered +$3 C Two Power/Data Cut-outs +$7 X Other TBD STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, +$ -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +$8 MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +$3 Premium, and Formica Premium (WR,, 77,, RD Finishes). *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. Tip: Whiteboard laminate is not available on Stealth Team Tables. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Trim is clear anodized aluminum. > Acrylic dividers are 11 H. > Product numbers include entire table (e.g.: top, sides, structure). > Table Ships assembled. Power data unit and acrylic screens field installed. > Whiteboard laminate is not available on Stealth Team Tables. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Stealth Team Tables - 9" Seated Height LYTL37A@# Laminate Team Table, seated, 3 D x 7 W $58 LYTL38A@# Laminate Team Table, seated, 3 D x 8 W $5779 LYTL39A@# Laminate Team Table, seated, 3 D x 9 W $5779 LYTL7A@# Laminate Team Table, seated, D x 7 W $111 LYTL8A@# Laminate Team Table, seated, D x 8 W $1 LYTL9A@# Laminate Team Table, seated, D x 9 W $1 LYTL87A@# Laminate Team Table, seated, 8 D x 7 W $111 LYTL88A@# Laminate Team Table, seated, 8 D x 8 W $1 LYTL89A@# Laminate Team Table, seated, 8 D x 9 W $1 Veneer Stealth Team Tables - 9" Seated Height LYTV37A@# Veneer Team Table, seated, 3 D x 7 W $917 LYTV38A@# Veneer Team Table, seated, 3 D x 8 W $97 LYTV39A@# Veneer Team Table, seated, 3 D x 9 W $97 LYTV7A@# Veneer Team Table, seated, D x 7 W $1,118 LYTV8A@# Veneer Team Table, seated, D x 8 W $1,79 LYTV9A@# Veneer Team Table, seated, D x 9 W $1,79 LYTV87A@# Veneer Team Table, seated, 8 D x 7 W $1,118 LYTV88A@# Veneer Team Table, seated, 8 D x 8 W $1,79 LYTV89A@# Veneer Team Table, seated, 8 D x 9 W $1,79 Laminate Stealth Team Tables - " Standing Height LYTL37B@# Laminate Team Table, standing, 3 D x 7 W $5999 LYTL38B@# Laminate Team Table, standing, 3 D x 8 W $331 LYTL39B@# Laminate Team Table, standing, 3 D x 9 W $331 LYTL7B@# Laminate Team Table, standing, D x 7 W $ LYTL8B@# Laminate Team Table, standing, D x 8 W $99 LYTL9B@# Laminate Team Table, standing, D x 9 W $99 LYTL87B@# Laminate Team Table, standing, 8 D x 7 W $ LYTL88B@# Laminate Team Table, standing, 8 D x 8 W $99 LYTL89B@# Laminate Team Table, standing, 8 D x 9 W $99 COORDINATING See page 19 for coordinating Stealth Credenzas. Laminate Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - 9" Seated Height LYTL87AP# Laminate Team Table, seated, 8 D x 7 W, with power/ data and Dividers $77 LYTL88AP# Laminate Team Table, seated 8 D x 8 W, with power/ data and Dividers $85 LYTL89AP# Laminate Team Table, seated 8 D x 9 W, with power/ data and Dividers $85 Veneer Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - 9" Seated Height LYTV87AP# Veneer Team Table, seated, 8 D x 7 W, with power/ data and Dividers $11,711 LYTV88AP# Veneer Team Table, seated 8 D x 8 W, with power/ data and Dividers $1,387 LYTV89AP# Veneer Team Table, seated 8 D x 9 W, with power/ data and Dividers $1,387 Tip: Ellora is Clear Aluminum with Black Interior. For additional details, see page 19. Laminate Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - " Standing Height LYTL87BP# Laminate Team Table, standing, 8 D x 7 W, with power/ data and Dividers $8 LYTL88BP# Laminate Team Table, standing 8 D x 8 W, with power/ data and Dividers $8558 LYTL89BP# Laminate Team Table, standing 8 D x 9 W, with power/ data and Dividers $8558 Veneer Stealth Team Tables with Double-Sided Ellora Power/Data Assembly and Acrylic Dividers - " Standing Height LYTV87BP# Veneer Team Table, standing, 8 D x 7 W, with power/ data and Dividers $1,7 LYTV88BP# Veneer Team Table, standing 8 D x 8 W, with power/ data and Dividers $1,951 LYTV89BP# Veneer Team Table, standing 8 D x 9 W, with power/ data and Dividers $1,951 Tip: Ellora is Clear Aluminum with Black Interior. For additional details, see page 19. TABLES STEP - STEALTH Veneer Stealth Team Tables - " Standing Height LYTV37B@# Veneer Team Table, standing, 3 D x 7 W $978 LYTV38B@# Veneer Team Table, standing, 3 D x 8 W $1,31 LYTV39B@# Veneer Team Table, standing, 3 D x 9 W $1,31 LYTV7B@# Veneer Team Table, standing, D x 7 W $1,8 LYTV8B@# Veneer Team Table, standing, D x 8 W $11,35 LYTV9B@# Veneer Team Table, standing, D x 9 W $11,35 LYTV87B@# Veneer Team Table, standing, 8 D x 7 W $1,8 LYTV88B@# Veneer Team Table, standing, 8 D x 8 W $11,35 LYTV89B@# Veneer Team Table, standing, 8 D x 9 W $11,35

73 1 13 Value Legs (^) Paint Suffix List G Storm R Black S Silver T Medium Tone U Chrome (not available on H-legs) +$198 W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Standard height is For shorter heights put X in front of the part number and add $5 list. For taller, put XX in front and add $8 list. Double for -Post X Base. Non-standard heights not available on height-adjustable legs. Maximum worksurface height is ". > Installation hardware included > All Value Legs are available in chrome except H Legs. See Step 1. > All value legs with casters use " casters. > For number of bases required per table size and recommended base locations, see page -5. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Value T-Legs with Levelers, package of two LTS18^ T-Leg, levelers, for 18 D table (1 spread) $8 LTS^ T-Leg, levelers, for D table ( spread) $9 LTS3^ T-Leg, levelers, for 3 D or 3 D table ( spread) $51 Value T-Legs on Casters, package of two LTSC18^ T-Leg, casters, for 18 D table (1 spread) $59 LTSC^ T-Leg, casters, for D table ( spread) $55 LTSC3^ T-Leg, casters, for 3 D or 3 D table ( spread) $57 Value Column Legs for Peninsula, D-Top, Spanner and Jetty Worksurfaces - 3 diameter, package of one LCLMP^ Column Leg $18 Value Straight Legs - diameter LPLE^ Straight Leg, leveler $118 LPLE^ Straight Leg, leveler, package of two $1 LPLEC^ Straight Leg, caster $19 LPLEC^ Straight Leg, caster, package of two $3 TABLES STEP - VALUE Value Folding T-Leg Base Assembly with Levelers, package of two LTSF18^ Folding T-Leg, levelers, for 18 D table (1 spread) $83 LTSF^ Folding T-Leg, levelers, for D table ( spread) $9 LTSF3^ Folding T-Leg, levelers, for 3 D or 3 D table ( spread) $917 Value Folding Straight Legs, package of two LPLEF^ Folding Straight Leg, leveler $71 LPLECF^ Folding Straight Leg, caster $89 Tip: For use on maximum table size of 3 x or 8 x8. For larger tables specify heavy duty mechanism. Put X in front of the part number and add $3 to list price (package of ). Tip: Folding T-Legs can be mounted on tables as short as W. Value Folding T-Leg Base Assembly with Casters, package of two LTSFC18^ Folding T-Leg, casters, for 18 D table (1 spread) $93 LTSFC^ Folding T-Leg, casters, for D table ( spread) $9 LTSFC3^ Folding T-Leg, casters, for 3 D or 3 D table ( spread) $979 Tip: Folding T-Legs can be mounted on tables as short as W. Value Pin Adjustable Straight Legs LAPL^ Pin Adjustable Straight Leg, leveler $311 LAPL^ Pin Adjustable Straight Leg, leveler, package of two $59 LAPLC^ PinAdjustable Straight Leg, caster $3 LAPLC^ PinAdjustable Straight Leg, caster, package of two $3 Tip: Adjusts - 35 with one inch increments (including top). Value T-Leg Flip Base Assembly with Casters and Single Release Handle, package of two LTSAC8^ Flip T-Leg, casters, for 18 D table (1 spread) $13 LTSACD^ Flip T-Leg, casters, for D table ( spread) $151 LTSACD3^ Flip T-Leg, casters, for 3 D table ( spread) $18 Value X-Bases with Levelers LXBA^ X-Base, levelers, for round or square table $3 LXBB^ X-Base, levelers, for 3-3 round or 3 square table $5 LXBC^ X-Base, levelers, for round or 3 square table $58 LXBD^ X-Base, levelers, for 8 round or square table $585 Tip: For 3"D T-Leg Flip Base assembly, see page 131. Value C-Legs with Levelers, package of two LCV18^ C-Leg, levelers, for 18 D table $9 LCV^ C-Leg, levelers, for D table $98 LCV3^ C-Leg, levelers, for 3 D table $59 Value X-Bases with Casters LXBCA^ X-Base, casters, for round or square table $35 LXBCB^ X-Base, casters, for 3-3 round or 3 square table $ LXBCC^ X-Base, casters, for round or 3 square table $553 LXBCD^ X-Base, casters, for 8 round or square table $581 Value C-Legs with Casters, package of two LCVC18^ C-Leg, casters, for 18 D table $558 LCVC^ C-Leg, casters, for D table $55 LCVC3^ C-Leg, casters, for 3 D table $57 Value TT-Legs with Levelers, package of one LTSD^ TT-Leg, levelers, for table up to D (3 spread) $3 Value Flip X-Bases on Casters LXFAC^ Flip X-Base, casters, for round table $8 LXFBC^ Flip X-Base, casters, for 3-3 round or -3 square table $818 LXFCC^ Flip X-Base, casters, for round or 3 square table $91 LXFDC^ Flip X-Base, casters, for 8 round or square table $98 Value H-Legs, package of one LHA^ H-leg (1 spread) for 18- D table with dia. Columns $8 LHB^ H-Leg ( spread) for 3-3 D table with 3 dia. Columns $33 LHC^ H-Leg ( spread) for -8 D table with 3 dia. Columns $1 LHD^ H-Leg (3 spread) for 5- D table with dia. Columns $833 Value -Post X-Base with Levelers LXBE^ -Post X-Base, levelers, for 5 - round or 8 square table $17 LXBF^ -Post X-Base, levelers, for -8 round table $115

74 1 15 Choosing Power, Data, & Telecom Solutions We make it easy to choose the right Power/Data assembly, assuring you have a highly functional yet cost effective solution. With a little bit of planning, empowering a table or a large training room can be simple usually without the added complexity and expense of a technology integrator. Listed below are planning tips to help assure an impressive, productive installation. Step 1 Determine the number of power outlets needed. Based on the size of the table and type of space, determine how many users might need power. Tip: If the table will be used continuously for long periods of time, users will need to plug in their laptops. If so, a higher number of outlets may be needed. Step Determine the number and type of datacom connections needed. Which systems require physical connections? If the room or facility has a wireless network, fewer will be needed. Step 3 Determine which Power/Data unit best fits your requirements. Use the Conference and Training/Teaming charts as well as the detailed assembly descriptions in this Price List to compare capabilities and features. Be sure to review the datacom options available for each assembly. Data Options - Each unit is marked with an or to identify the category of datacom options available. Both types can meet most needs, but if you have diverse or unusual needs, assemblies with a a wider variety of options available. : Power/Data units in this category come standard with data openings and a Voice/Data Adapter kit. Adapters from the kit are used to install jacks or couplers (ordered separately from Enwork or supplied by the customer) into the data openings of the power/data unit. Voice/data options are punch down. Audio/video options are inline. : Power/Data units in this category come standard with datacom plate openings. Datacom plates must be ordered from Enwork or openings can be left empty. Datacom plates can be configured to include multiple voice, data, audio and video solutions. Voice/data options are punch down. Audio/ video options are inline. Tip: Two or more smaller units can provide better user access on longer conference tables. When using multiple units, it is often easier and more convenient if power cords can be combined. Some assemblies can be daisy-chained together under the table. In other cases a UL listed power strip under the top or hidden in a base becomes the consolidation point, reducing the number of cords that need to be routed to the floor. Tip: Some units are one-sided, others are two-sided. For the same number of outlets, a single two-sided unit will be lower cost than two one-sided units. Tip: Be sure you understand how power and cabling will be routed from the building into the space and to the table(s). Tip: To select an appropriate in-feed, determine if power will be coming from an outlet or hard-wired to the building. Hardwiring also allows the possibility of multi-circuit power within a table or series of interconnected tables. Note that only some units can be hardwired. Tip: If power needs to run from one table to the next, look for units that can be daisy-chained. If connected tables will be re-configured into alternate set-ups, then units with non-sequential daisy-chaining are often the best solution. have Step Determine the location and orientation of the Power/Data units in the table top. The position of units in a table is important because it affects both access from different seating positions as well as the ease with which power and data can be routed from the building into the table. Tip: For smaller tables, a single unit in the center is the most common solution. For tables longer than 9, multiple and/or two-sided units provide more convenient user access. Tip: One-sided units typically open towards the end of a table. Two-sided units typically open towards the long sides of a table. Tip: Multiple units are often spaced equally along the length of the table or positioned near the ends of the table, typically - in from the edge. Tip: Positioning one or more units just next to legs or bases usually makes it easier to keep everything hidden. Placing assemblies directly over legs or bases requires special attention to assure there is no physical interference - contact designteam@enwork.com. Tip: Refer to the Conference Table Power/Data Standard Cut-outs page in this Price List to see different positioning options. Step 5 Don t forget to order accessories Cable Grippers, Cable Managers, and other accessories help keep all the wires and cables organized and out of sight. See page 17 for available options. TABLES STEP 3 - /

75 1 17 Choosing Power, Data, & Telecom Solutions Training, Teaming, and Workstation Applications Product* Door/Case # Power Daisy-Chaining Hardwire # Datacom Datacom USB Charging Key Features Material Outlets Available Option Ports Options Available and Descriptions Conference Applications Product* Door/Case # Power Daisy-Chaining Hardwire # Datacom Datacom USB Charging Key Features Material Outlets Available Option Ports Options Available and Descriptions TABLES STEP 3 - / Clamp-on Axil X Aluminum N Special 1 or Y Clamp on convenience and flexible power cord, longer NEW Cove Aluminum Y Special NA Y Surface mounted power and charging USB perfect for retrofit projects. cords available. Ellora, Aluminum Special Special Y Great aesthetics. Flush fit door with Single-Sided cable drop space. Available with pre-wired dual charging USBs in one or more Datacom ports. Best Seller Flip-n-Go Steel Y Special 1 Multi-option N Popular choice for multiple mobile Plate table applications. Flush-fit doors with cable drop space. Convenience Outlet on bottom. ' or 9' power cord. Includes 15A 15V circuit breaker for overload protection. NEW Node Die-Cast Zinc 1 or N N Y Clean, flush mount design. Fits (Specials Only) 1.5 tops. amp stacked USB charging available. 15 amp power cord. Specialty Powerlex Impression Y Y N Power integration below the Modesty Panel work surface. Non-sequential Daisy Chaining. New Satellite Steel 1 or Y 1 or Y Ideal for day updates to existing Undersurface tables. Available with angled or Mount rounded aesthetic. Best Seller Villa, Corded Steel Y Special or RJ-5 CAT Y Popular low cost choice for multiple mobile table applications. Convenience Outlet on bottom. Only data option is two RJ-5 CAT only punch-downs. Specialty CHI, NYC, SF, See Price List or contact designteam@enwork.com * Go to for additional information Alexander Linear, Aluminum, or 8 N Special or Special Modern long rectangular shape Double-Sided aesthetics with pop-up doors. Two 1' cords. Best Seller Ellora, Aluminum, or 8 Y Special or Y Aesthetics. Flush fit door with Double-Sided cable drop space. Available with pre-wired dual charging USBs in one or more Datacom ports. Sequential Daisy-Chaining is optional. Flip-n-Go Steel Y Y 1 Multi-option N Popular choice for multiple mobile Plate table applications. Flush-fit doors with cable drop space. Convenience Outlet on bottom. or 9 power cord. Includes 15A 15V circuit breaker for overload protection. Specialty Foundation Veneer, 3-7 Y Y 1-9 Multi-option N Doors lay flat when open. Power Trough Kit Laminate or Data varies by table size. Aluminum New PowerEdge Steel -1* NA Y -8* Y Complete top with integrated power data recessed from edge. Choices include power, stacked *Depending on table size and option choices USB charging, and data. Oasis 3" Steel 1 Y Y Multi-option Special The most substantial solution Plates for conference applications. Retracting doors. Best Seller Oasis 15" Steel Y Y Multi-option Y Great flexibility. Retracting doors Plates flush with surface. 9' power cord. New Satellite Steel 1 or Y 1 or Y Ideal for day updates to existing Undersurface tables. Available with angled or Mount rounded aesthetic. Specialty CHI, NYC, SF, See Price List or contact designteam@enwork.com

76 18 19 Power & Data > For product features and capability comparison, see page > For details and pricing of features listed under the Additional Specials section of a product, designteam@ enwork.com. > Data options for and can be found on page > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Alexander Cut-Out Size List Price (US$) Data Options: Cord/Hardwire: 1' power cord Features: 15 amp capability, modern aesthetic Additional Specials: Hardwired power, Longer cords, additional openings Material: Anodized aluminum Alexander Linear Double-Sided Power/Data Assembly with two 1' power cords PDLA Alexander Linear, power/ data openings, Clear Anodized Aluminum. x 1.19 $13 PDLR Alexander Linear, power/ data openings, Black Anodized Aluminum. x 1.19 $18 PDL33A Alexander Linear, power/ data openings, Clear Anodized Aluminum. x.19 $1353 PDL33R Alexander Linear, power/ data openings, Black Anodized Aluminum. x.19 $7 PDLA Alexander Linear, 8 power/ circuit breakers/ data openings, Clear Anodized Aluminum. x 8.19 $175 PDLR Alexander Linear, 8 power/ circuit breakers/ data openings, Black Anodized Aluminum. x 8.19 $17 Part Number Ellora Cut-Out Size List Price Data Options: Cord: ' (Single), 1' (Double) Features: Flush fit doors with cable drop space Additional Specials: Pre-installed voice/data, different configurations Material: Anodized aluminum Ellora Single-Sided Power/Data Assemblies with ' power cord PDEAW Ellora Single, pwr/ data openings, Clear Aluminum w/ White Interior 5. x 8. $3 PDEAR Ellora Single, pwr/ data openings, Clear Aluminum w/ Black Interior 5. x 8. $3 PDERR Ellora Single, pwr/ data openings, Black Aluminum w/ Black Interior 5. x 8. $87 PDE1AW Ellora Single, pwr/1 data opening/ charging USB, Clear Aluminum w/ White Interior 5. x 8. $78 PDE1AR Ellora Single, pwr/1 data opening/ charging USB, Clear Aluminum w/ Black Interior 5. x 8. $78 PDE1RR Ellora Single, pwr/1 data opening/ charging USB, Black Aluminum w/ Black Interior 5. x 8. $959 TABLES STEP 3 - / Axil-X Data Options: Cord/Hardwire: ' power cord Features: Clamps to any worksurface, 15amp Additional Specials: Longer cords, different number of openings Material: Anodized aluminum Axil-X Clamp-On Power/Data Assembly with ' power cord PDAXR Axil-X Clamp-on, power/ data openings, Black $79 PDAXS Axil-X Clamp-on, power/ data openings, Silver $35 PDAXW Axil-X Clamp-on, power/ data openings, White $35 PDAX1UR Axil-X Clamp-on, power/1 data opening/ charging USB (stacked), Black $ PDAX1US Axil-X Clamp-on, power/1 data opening/ charging USB (stacked), Silver $89 PDAX1UW Axil-X Clamp-on, power/1 data opening/ charging USB (stacked), White $89 Cove Data Options: N/A Cord/Hardwire: 9 power cord Features: Spill resistant receptacles, 15amp Additional Specials: Longer cords, different number of openings Material: Anodized aluminum Cove Surface-Mount Power/Data Assembly with 9 power cord PDCOVR Cove, Corded, pwr, 9 pwr cord, extra plug on bottom, Black w/ Black Receptacles. x 5.5 $59 PDCOVW Cove, Corded, pwr, 9 pwr cord, extra plug on bottom, Gloss White w/ White Receptacles. x 5.5 $59 PDCOVS Cove, Corded, pwr, 9 pwr cord, extra plug on bottom, Silver w/ Black Receptacles. x 5.5 $59 PDCOR Cove, Corded, pwr/ charging USB, 9 pwr cord, extra plugs on bottom, Black w/ Black Receptacles. x 7.5 $78 PDCOW Cove, Corded, pwr/ charging USB, 9 pwr cord, extra plugs on bottom, Gloss White w/ White Receptacles. x 7.5 $78 PDCOS Cove, Corded, pwr/ charging USB, 9 pwr cord, extra plugs on bottom, Silver w/ Black Receptacles. x 7.5 $78 Ellora Double-Sided Power/Data Assemblies with two 1' power cords PDEAW Ellora Double, pwr/ data openings, Clear Aluminum w/ White Interior 9.81 x 8. $11 PDEAR Ellora Double, pwr/ data openings, Clear Aluminum w/ Black Interior 9.81 x 8. $11 PDERR Ellora Double, pwr/ data openings, Black Aluminum w/ Black Interior 9.81 x 8. $173 PDEAW Ellora Double, pwr/ data openings/ charging USB, Clear Aluminum w/ White Interior 9.81 x 8. $1 PDEAR Ellora Double, pwr/ data openings/ charging USB, Clear Aluminum w/ Black Interior 9.81 x 8. $1 PDERR Ellora Double, pwr/ data openings/ charging USB, Black Aluminum w/ Black Interior 9.81 x 8. $115 PDEAW Ellora Double, pwr/ data openings, Clear Aluminum w/ White Interior 9.81 x 11. $171 PDEAR Ellora Double, pwr/ data openings, Clear Aluminum w/ Black Interior 9.81 x 11. $171 PDERR Ellora Double, pwr/ data openings, Black Aluminum w/ Black Interior 9.81 x 11. $13 PDEAW Ellora Double, pwr/ data openings/ charging USB, Clear Aluminum w/ White Interior 9.81 x 11. $1519 PDEAR Ellora Double, pwr/ data openings/ charging USB, Clear Aluminum w/ Black Interior 9.81 x 11. $1519 PDERR Ellora Double, pwr/ data openings/ charging USB, Black Aluminum w/ Black Interior 9.81 x 11. $7 PDE88AW Ellora Double, 8 pwr/ circuit breakers/ data openings, Clear Aluminum w/ White Interior 9.81 x 1. $1588 PDE88AR Ellora Double, 8 pwr/ circuit breakers/ data openings, Clear Aluminum w/ Black Interior 9.81 x 1. $1588 PDE88RR Ellora Double, 8 pwr/ circuit breakers/ data openings, Black Aluminum w/ Black Interior 9.81 x 1. $5 PDE83AW Ellora Double, 8 pwr/ circuit breakers/ data openings/ charging USB, Clear Aluminum w/ White Interior 9.81 x 1. $185 PDE83AR Ellora Double, 8 pwr/ circuit breakers/ data openings/ charging USB, Clear Aluminum w/ Black Interior 9.81 x 1. $185 PDE83RR Ellora Double, 8 pwr/ circuit breakers/ data openings/ charging USB, Black Aluminum w/ Black Interior 9.81 x 1. $8

77 Power & Data > For product features and capability comparison, see page > For details and pricing of features listed under the Additional Specials section of a product, designteam@ enwork.com. > Data options for and can be found on page > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Ellora Cut-Out Size List Price (US$) Data Options: Cord: n/a (jumpers and infeeds ordered separately, below) Features: Flush fit doors with cable drop space Additional Specials: Pre-installed voice/data, different configurations Material: Anodized aluminum Part Number Cut-Out Size List Price Node Data Options: (Specials Only) Cord/Hardwire: ' Power Cord Features: Simple flush mount design, 15 amp, amp Additional Specials: Longer cords, Data openings Material: Painted die-cast Zinc charging USB duplex available TABLES STEP 3 - / Ellora Daisy Chain Double-sided Power/Data Assemblies with two 1" Harnesses and "H" Block, Clear Aluminum w/ Black Interior Circuit 1 PDEARDC1 Ellora Daisy Chain, Circuit 1, power/ data openings 9.81 x 8. $11 PDEARDC1 Ellora Daisy Chain, Circuit 1, power/ data openings/ charging USB 9.81 x 8. $15 PDEARDC1 Ellora Daisy Chain, Circuit 1, power/ data openings 9.81 x 11. $133 PDEARDC1 Ellora Daisy Chain, Circuit 1, power/ data openings/ charging USB 9.81 x 11. $1597 Circuit PDEARDC Ellora Daisy Chain, Circuit, power/ data openings 9.81 x 8. $11 PDEARDC Ellora Daisy Chain, Circuit, power/ data openings/ charging USB 9.81 x 8. $15 PDEARDC Ellora Daisy Chain, Circuit, power/ data openings 9.81 x 11. $133 PDEARDC Ellora Daisy Chain, Circuit, power/ data openings/ charging USB 9.81 x 11. $1597 Jumpers (used to connect Ellora Daisy Chain units) PDEJUMPXX Jumper for connecting Ellora Units, package of one $137 Infeeds A8BP7 Base Power-In for Hardwire, 7 $18 A8BP1 Base Power-In for Hardwire, 1 $3 A1BP7 Base Power-In for RA Plug Circuit 1 (only), 7 $39 Flip-n-Go Tip: Use hardwire infeeds if UL listed (not recognized) is required. Tip: Infeeds have a amp plug end which requires a amp wall receptacle. A plug adapter is required if using a standard 15 amp receptacle. The adapter is not included and must be purchased separately. Conntek Amp to -Amp Plug Adapters and similar are available through amazon.com and at many electrical supply houses. Data Options: Features: Convenience outlet, flush fit doors with cable drop space, 15A 15V circuit breaker Material: Painted steel 15 amp Receptacle amp Receptacle Cord/Hardwire: ' or 9' power cord Additional Specials: Hardwired power Flip-n-Go Power/Data Assemblies, 9"x5.5", with additional convenience power outlet on bottom PDNSS Flip-n-Go Grommet, power/1 telecom plate cutout, power cord, Silver.75 x 8.38 $55 PDNSR Flip-n-Go Grommet, power/1 telecom plate cutout, power cord, Black.75 x 8.38 $55 PDNS9S Flip-n-Go Grommet, power/1 telecom plate cutout, 9 power cord, Silver.75 x 8.38 $533 PDNS9R Flip-n-Go Grommet, power/1 telecom plate cutout, 9 power cord, Black.75 x 8.38 $533 PDFS Node Power Unit, Outlets, Silver 3 Diameter $5 PDFR Node Power Unit, Outlets, Black 3 Diameter $5 PDFW Node Power Unit, Outlets, Parchment White 3 Diameter $5 PDF1S Node Power Unit, 1 Outlet/ charging USB, Silver 3 Diameter $37 PDF1R Node Power Unit, 1 Outlet/ charging USB, Black 3 Diameter $37 PDF1W Node Power Unit, 1 Outlet/ charging USB, Parchment White 3 Diameter $37 Oasis Power/Data Assemblies, 15 amp power cords Data Options: Features: Flush with worksurface, Integral lid, Flexibility Material: Painted steel Cord/Hardwire: 9 cords or Daisy Chaining hardwire Oasis Power/Data Assemblies, Plug-In PDOASIS15S Oasis, power/ telecom plate cutouts, two 18 power cords, 9 x15, Silver 8.5 x 1.5 $ PDOASIS15R Oasis, power/ telecom plate cutouts, two 18 power cords, 9 x15, Black 8.5 x 1.5 $ PDOAUU15S Oasis, power/1 telecom plate cutout/ charging USB, two 18 power cords, 9 x15, Silver 8.5 x 1.5 $5 PDOAUU15R Oasis, power/1 telecom plate cutout/ charging USB, two 18 power cords, 9 x15, Black 8.5 x 1.5 $5 PDOASIS3S Oasis, 1 power/ telecom plate cutouts, four 18 power cords, 9 x3, Silver 8.5 x 9.5 $17 PDOASIS3R Oasis, 1 power/ telecom plate cutouts, four 18 power cords, 9 x3, Black 8.5 x 9.5 $17 Tip: Telecom plates ordered separately. Oasis Daisy Chain Power/Data Assemblies, hardwire interface, Amp, Circuit 1 PDOASIS15S Oasis Daisy Chain, Circuit 1, power/ telecom plate cutouts, 9 x15, Silver 8.5 x 1.5 $93 PDOASIS15R Oasis Daisy Chain, Circuit 1, power/ telecom plate cutouts, 9 x15, Black 8.5 x 1.5 $93 PDOAUU15S Oasis Daisy Chain, Circuit 1, power/1 telecom plate cutout/ charging USB, 9 x15, Silver 8.5 x 1.5 $79 PDOAUU15R Oasis Daisy Chain, Circuit 1, power/1 telecom plate cutout/ charging USB, 9 x15, Black 8.5 x 1.5 $79 PDOASIS3S Oasis Daisy Chain, Circuit 1, 1 power/ telecom plate cutouts, 9 x3, Silver 8.5 x 9.5 $88 PDOASIS3R Oasis Daisy Chain, Circuit 1, 1 power/ telecom plate cutouts, 9 x3, Black 8.5 x 9.5 $88 Oasis Daisy Chain Power/Data Assemblies, hardwire interface, Amp, Circuit PDOASIS15DS Oasis Daisy Chain, Circuit, power/ telecom plate cutouts, 9 x 15, Silver 8.5 x 1.5 $93 PDOASIS15DR Oasis Daisy Chain, Circuit, power/ telecom plate cutouts, 9 x 15, Black 8.5 x 1.5 $93 PDOAUU15DS Oasis Daisy Chain, Circuit, power/1 telecom plate cutout/ charging USB, 9 x15, Silver 8.5 x 1.5 $79 PDOAUU15DR Oasis Daisy Chain, Circuit, power/1 telecom plate cutout/ charging USB, 9 x15, Black 8.5 x 1.5 $79 PDOASIS3DS Oasis Daisy Chain, Circuit, 1 power/ telecom plate cutouts, 9 x 3, Silver 8.5 x 9.5 $88 PDOASIS3DR Oasis Daisy Chain, Circuit, 1 power/ telecom plate cutouts, 9 x 3, Black 8.5 x 9.5 $88 Oasis Power-In and Jumpers PDVP7 Hardwire Power-In, 7 $18 PDVP1 Hardwire Power-In, 1 $9 PDV7AP Base Power-In, 7 (for Plug Circuit 1 only) $79 PDJUMPXX Jumper for connecting Oasis Daisy Chain Units, package of two $

78 Power & Data > For product features and capability comparison, see page > For details and pricing of features listed under the Additional Specials section of a product, designteam@enwork.com. > Data options for and can be found on page > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Satellite Data Options: Features: Only 1.5 H, mounts under worksurface, Cord/Hardwire: 1 Power Cord with 15 amp plug 15 amp capability, strain relief on cord Additional Specials: Hardwire Material: Painted steel with matching plastic outlets Angled Undermount Satellite Power/Data Units, Power PDPAAPW Angled Power Data Unit w/ 1 cord, Power, White w/ White $9 PDPAAPS Angled Power Data Unit w/ 1 cord, Power, Silver w/ Grey $9 PDPAAPR Angled Power Data Unit w/ 1 cord, Power, Black w/ Black $9 Angled Undermount Satellite Power/Data Units, 1 Power/ Stacked USB PDPAAUW Angled Power Data Unit w/ 1 cord, 1 Power/ Stacked USB, White w/ White $35 PDPAAUS Angled Power Data Unit w/ 1 cord, 1 Power/ Stacked USB, Silver w/ Grey $35 PDPAAUR Angled Power Data Unit w/ 1 cord, 1 Power/ Stacked USB, Black w/ Black $35 Angled Undermount Satellite Power/Data Units, 1 Power/1 Data Opening PDPAADW Angled Power Data Unit w/ 1 cord, 1 Power/1 Data Opening, White w/ White $35 PDPAADS Angled Power Data Unit w/ 1 cord, 1 Power/1 Data Opening, Silver w/ Grey $35 PDPAADR Angled Power Data Unit w/ 1 cord, 1 Power/1 Data Opening, Black w/ Black $35 Tip: Data knockout adapter tree included. Tip: Will not accommodate VGA connections. Tip: Order a plug strip to consolidate multiple Satellite units under a single top. Part Number Cut-Out Size List Price Villa Data Options: N/A Features: Convenience outlet, Circuit breaker, Low cost solution Material: Painted steel Cord/Hardwire: ' or 9' power cord Additional Specials: Hardwire (designteam@enwork.com) Villa Power/Data Assemblies, 3.5"x5.5", with additional convenience power outlet on bottom PDVCS Villa, power/ data openings, power cord, Silver 3. x 5.31 $51 PDVCR Villa, power/ data openings, power cord, Black 3. x 5.31 $51 PDVC9S Villa, power/ data openings, 9 power cord, Silver 3. x 5.31 $51 PDVC9R Villa, power/ data openings, 9 power cord, Black 3. x 5.31 $51 PDVCUSS Villa, power/ data openings/ charging USB, power cord, Silver 3. x 5.31 $9 PDVCUSR Villa, power/ data openings/ charging USB, power cord, Black 3. x 5.31 $9 PDVCUS9S Villa, power/ data openings/ charging USB, 9 power cord, Silver 3. x 5.31 $9 PDVCUS9R Villa, power/ data openings/ charging USB, 9 power cord, Black 3. x 5.31 $9 Tip: Data openings are for keystone data jacks only, and can be purchased independently. PDVDS Villa, power/ RJ-5 CAT jacks, power cord, Silver 3. x 5.31 $33 PDVDR Villa, power/ RJ-5 CAT jacks, power cord, Black 3. x 5.31 $33 PDVD9S Villa, power/ RJ-5 CAT jacks, 9 power cord, Silver 3. x 5.31 $33 PDVD9R Villa, power/ RJ-5 CAT jacks, 9 power cord, Black 3. x 5.31 $33 TABLES STEP 3 - / Rounded Undermount Satellite Power/Data Units, Power PDP88PW Rounded Power Data Unit w/ 1 cord, Power, White w/ White $9 PDP88PS Rounded Power Data Unit w/ 1 cord, Power, Silver w/ Grey $9 PDP88PR Rounded Power Data Unit w/ 1 cord, Power, Black w/ Black $9 Plug Strip with Surge Protection, Rotating Plug and 8' cord CPPSI Belkin -outlet plug strip $118 Rounded Undermount Satellite Power/Data Units, 1 Power/ Stacked USB PDP88UW Rounded Power Data Unit w/ 1 cord, 1 Power/ Stacked USB, White w/ White $35 PDP88US Rounded Power Data Unit w/ 1 cord, 1 Power/ Stacked USB, Silver w/ Grey $35 PDP88UR Rounded Power Data Unit w/ 1 cord, 1 Power/ Stacked USB, Black w/ Black $35 Rounded Undermount Satellite Power/Data Units, 1 Power/1 Data Opening PDP88DW Rounded Power Data Unit w/ 1 cord, 1 Power/1 Data Opening, White w/ White $35 PDP88DS Rounded Power Data Unit w/ 1 cord, 1 Power/1 Data Opening, Silver w/ Grey $35 PDP88DR Rounded Power Data Unit w/ 1 cord, 1 Power/1 Data Opening, Black w/ Black $35 Tip: Data knockout adapter tree included. Tip: Will not accommodate VGA connections. Tip: Order a plug strip to consolidate multiple Satellite units under a single top.

79 Power & Data > Items on this page work with Power Data units marked with a circle. > See Tables Power and Data section of the Enwork website to see detailed pictures of standard Telecom plates. > Other combinations available, contact designteam@enwork.com. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Telecom Plates (for Flip-N-Go, Oasis and Foundation Trough Kits) List Price (US$) A-BL Blank cover to fill Hole in Power/Data unit $19 A-BL RJ5 category 5 Data Inline (Qty. ) $199 A-BL-B RJ5 category Data (Qty. 1) $13 > Items on this page work with Power Data units marked with a triangle. > These Power Data units come with an Adapter Kit that allows the solutions below to be snapped into the unit's data openings. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number List Price (US$) PDBHDR HDMI Corded Coupler, 18" Length, Black $19 PDBHDW HDMI Corded Coupler, 18" Length, White $19 TABLES STEP 3 - / A-BL-B-B RJ5 category Data (Qty. ) $199 A-BL-A-B-B RJ11 category 3 Phone (Qty. 1) and RJ5 category Data (Qty. ) $5 A-BL-B-B-B-B RJ5 category Data (Qty. ) $37 PDBVGA VGA 15-pin Cord, M/F, 1' Length $137 A-BL-B-B-C51 RJ5 category Data (Qty. ) and 15 pin HDVGA (Qty. 1) $38 A-BL-L-C51 Mini-stereo (Qty. 1) and 15 pin HDVGA (Qty 1) $8 A-BL-B-B-L-C51 RJ5 category Data (Qty. ), Mini-stereo (Qty. 1) and 15 pin HDVGA $15 PDBCAT RJ5 CAT Data Cord, Siemen, M/F, 1' Length $117 A-BL pin XLR Female (Qty. ) $383 A-BL-CRDMINDER Cordminder Plate (Qty. 1) $ A-BL-1-C51 15 pin HDVGA (Qty. 1) and USB (Qty. 1) $57 A-BL-A-1-C51 RJ11 category 3 Phone (Qty. 1), 15 pin HDVGA (Qty. 1) and USB (Qty. 1) $38 PDBCAT5EA RJ5 Cat 5E Data Cord, Amp, M/F, 9' Length $71 PDBCAT5EB RJ5 Cat 5E Data Cord, Panduit, M/F, 9' Length $97 A-BL-C pin HDVGA (Qty. 1), and RCA Red, White and Yellow (Qty. 1) $8 A-BL-Z DVI (Qty. 1) $31 PDBCAT5EC RJ5 Cat 5E/ Data Jack, Punch Down $3 A-BL-C5-L-C51 HDMI (Qty. 1), Mini-stereo (Qty. 1), and 15 pin HDVGA $58 A-BL-C5-B-B HDMI (Qty. 1) and RJ5 category Data (Qty. ) $378 A-BL-C5 HDMI (Qty. 1) $ A-BL-C5-C51 HDMI (Qty. 1) and 15 pin HDVGA $353 A-BL-C5-C51-B-B HDMI (Qty. 1), 15 pin HDVGA (Qty. 1), and RJ5 category Data (Qty. ) $5 PDBMINIR Mini-Stereo, M/F, 1' length, Black $8 PDBMINIW Mini-Stereo, M/F, 1' length, White $8 A-BL-C5-A-A HDMI (Qty. 1) and RJ11 category 3 Phone (Qty. ) $17 A-BL-L-C51-Z Mini-stereo (Qty. 1), 15 pin HDVGA (Qty. 1), and DVI (Qty.1) $89 A-BL-1-1 USB (Qty. ) $17 A-BL-1-C5 HDMI (Qty. 1) and USB (Qty. 1) $88 PDUSBAR USB-A Data Transfer (not charging), ' length, Black $8 PDUSBAW USB-A Data Transfer (not charging), ' length, White $8 COM KEY 73 Cat 5E Data Inline 13 XLR Female 1 USB, Type A/A with 7 patch cord 77/78/79 RCA Inline A (suffix) Cat 3 Phone (punch down) B Cat Data (punch down) C5 HDMI with 3 patch cord C51 15 pin HDVGA with 7 patch cord L Mini-stereo Inline Z DV1 Inline Tip: > Phone/Data jacks are punch-down unless otherwise indicated (e.g. Inline ) > Video RCA, mini-stereo, and DVI are Inline (Inline allows connection to the back of the connector without any wiring) > XLR connector is solder > VGA includes 7 ultra thin patch cord > HDMI includes 3 ultra thin patch cord > USB is type A/A, 7 patch cord UR Data Adapter Tree, Grey $1 PDDTR Data Adapter Tree, Black $1 PDDTW Data Adapter Tree, White $1 Tip: Service part. Comes standard with Order for reconfiguration. power data units.

80 Power & Data - Cable Management - Monitor Risers Only (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number List Price (US$) Monitor Riser, Steel, 11 D URISER8^ Monitor Riser for Single Monitor, 8 W $339 URISER39^ Monitor Riser for Double Monitors, 39 W $7 Vertical Cable Managers with weighted base PDVCMR Vertical Cable Manager, flexible spine, 3, worksurface attached, Black $198 PDVCMS Vertical Cable Manager, flexible spine, 3, worksurface attached, Silver $198 ULCM Vertical Cable Manager, flexible spine, 1.5 diameter, Black $13 TABLES STEP 3 - / Cable Managers and Grippers PDGR Universal Cable Gripper, 5 openings, Black $7 Notes PDUCMR Universal Cable Manager, extruded plastic, double-sided tape,, Black $59 PDUCMS Universal Cable Manager, extruded plastic, double-sided tape,, Silver $59 Tip: Can be mounted vertically to legs or horizontally under a worksurface PDJTR Universal Cable Manager extruded black plastic J-channel, ( actual) $ PDJTR3 Universal Cable Manager extruded black plastic J-channel, 3 (8 actual) $3 PDJTR3 Universal Cable Manager extruded black plastic J-channel, 3 (3 actual) $3 PDJTR Universal Cable Manager extruded black plastic J-channel, ( actual) $51 PDJTR8 Universal Cable Manager extruded black plastic J-channel, 8 ( actual) $51 PDJTR5 Universal Cable Manager extruded black plastic J-channel, 5 (5 actual) $ PDJTR Universal Cable Manager extruded black plastic J-channel, (58 actual) $ PDJTR Universal Cable Manager extruded black plastic J-channel, ( actual) $ PDJTR7 Universal Cable Manager extruded black plastic J-channel, 7 (7 actual) $ Tip: If installing between legs, order next smallest size. Tip: Channel is 1 H x 1.5 W Steel Cable Troughs PDK8 Steel Cable Trough for Tables, Black 8 W $11

81 Foundation Credenzas (&) Credenza Case Options Suffix List A Standard B Includes Vents (rear) +$37 C Includes oversized opening (far right) with +$37 Rear Access Door (includes vents and brush strip for cable management). Oversized opening can be used for AV Rack or Refrigerator (ordered separately). Remaining doors have adustable shelf behind them. This option available on " deep only credenzas. Height changes to 39" on buffet credenza, -door is unchanged. D Includes pull-out Waste Receptacle +$1111 (far left door). Remaining doors have an adjustable shelf behind them. E Includes pull-out Waste Receptacle +$17 (far left door) and oversized opening (far right) with Rear Access Door (includes vents and brush strip for cable management). Oversized opening can be used for AV Rack or Refrigerator (ordered separately). Remaining doors have an adjustable shelf behind them. This option available on " deep only credenzas. Height changes to 39" on buffet credenza, -door is unchanged. Tip: Case options not available on credenzas w/ aluminum trim. Tip: When Waste Receptacle is ordered, door handle will be mounted horizontally in center of door. Tip: Oversized opening for refrigerator and AV Rack is "W x 9"H (Buffet Credenzas) and W x. H (Credenzas). STEP (*) Credenza Top Suffix List A Standard Credenza top B Specialty Top, ordered separately (includes quartz, ply, solid surface or KyrstalCast ) on pages -1. Tip: Top options not available on credenzas w/ aluminum trim. Tip: For back-painted glass top, choose suffix A. > 11-degree hinges > D credenzas have an interior depth of 18.5 D. D credenzas have an interior depth of.5 D. > Includes locks and levelers > Ships assembled > Includes adjustable shelf > To add a back-painted glass top, choose suffix A in Step. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. H1 Credenza Buffet Credenza H1 Laminate Foundation Credenzas, 31"H 3 31 TDL3&*@# Laminate Credenza, doors, x 3 $ TDL8&*@# Laminate Credenza, doors, x 8 $ TDL&*@# Laminate Credenza, doors, x $ TDL7&*@# Laminate Credenza, doors, x 7 $ TDL&*@# Laminate Credenza, doors, x $ TDL7&*@# Laminate Credenza, doors, x 7 $ TDL8&*@# Laminate Credenza, doors, x 8 $ TDL9&*@# Laminate Credenza, doors, x 9 $58 H1 H1 Credenza Buffet Credenza COORDINATING See pages 8-13 for Foundation Conference Tables. H1 Laminate Foundation Credenzas with Aluminum Trim, 31"H 3 31 TEL3@# Laminate Credenza, doors, Aluminum Trim, x 3 $ TEL8@# Laminate Credenza, doors, Aluminum Trim, x 8 $ TEL@# Laminate Credenza, doors, Aluminum Trim, x $ TEL7@# Laminate Credenza, doors, Aluminum Trim, x 7 $8 31 TEL@# Laminate Credenza, doors, Aluminum Trim, x $ TEL7@# Laminate Credenza, doors, Aluminum Trim, x 7 $ H1 TABLES STEP - STEP 3 (@) Pull Suffix List: (A) Arc (B) Bar STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium Laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) Laminate Foundation Buffet Credenzas, 3"H 3 TDLB&*@# Laminate Buffet Credenza, doors/ drawers, x $ TDLB7&*@# Laminate Buffet Credenza, doors/ drawers, x 7 $ TDLB8&*@# Laminate Buffet Credenza, doors/ drawers, x 8 $ TDLB9&*@# Laminate Buffet Credenza, doors/ drawers, x 9 $53 Veneer Foundation Credenzas, 31"H 3 31 TDV3&*@# Veneer Credenza, doors, x 3 $ TDV8&*@# Veneer Credenza, doors, x 8 $ TDV&*@# Veneer Credenza, doors, x $ TDV7&*@# Veneer Credenza, doors, x 7 $ TDV&*@# Veneer Credenza, doors, x $ TDV7&*@# Veneer Credenza, doors, x 7 $9971 Veneer Foundation Buffet Credenzas, 3"H 3 TDVB&*@# Veneer Buffet Credenza, doors/ drawers, x $1,3 7 3 TDVB7&*@# Veneer Buffet Credenza, doors/ drawers, x 7 $13,835 Refrigerator and AV Rack CPR1 Refrigerator, Black w/ Stainless Steel Door $1351 Dimensions: 17.5 x.1 x.9 Tip: Enwork warranty does not apply. Refrigerator manufacturer warranty applies. CPAVR1 Freestanding AV Rack (18 D x 19.5 W x 5.5 H), $15 Middle Atlantic CFR-1-18 Laminate Buffet Foundation Credenzas with Aluminum Trim, 3"H 3 TELB@# Laminate Buffet Credenza, doors/ drawers, Aluminum Trim, x $1 7 3 TELB7@# Laminate Buffet Credenza, doors/ drawers, Aluminum Trim, x 7 $51 Veneer Foundation Credenzas with Aluminum Trim, 31"H 3 31 TEV3@# Veneer Credenza, doors, Aluminum Trim, x 3 $ TEV8@# Veneer Credenza, doors, Aluminum Trim, x 8 $7 31 TEV@# Veneer Credenza, doors, Aluminum Trim, x $ TEV7@# Veneer Credenza, doors, Aluminum Trim, x 7 $ TEV@# Veneer Credenza, doors, Aluminum Trim, x $ TEV7@# Veneer Credenza, doors, Aluminum Trim, x 7 $1,3 Veneer Buffet Foundation Credenzas with Aluminum Trim, 3"H 3 TEVB@# Veneer Buffet Credenza, doors/ drawers, Aluminum Trim, x $1, TEVB7@# Veneer Buffet Credenza, doors/ drawers, Aluminum Trim, x 7 $1,39

82 Foundation Lecterns Pull Suffix List: (A) Arc (B) Bar STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. > 11-degree hinges > Ships assembled > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. COORDINATING See pages 8-13 for Foundation Conference Tables. H1 Laminate Foundation Lecterns with door, Non-Locking Cabinet 7 9 LPWLECTA@# Laminate Lectern, levelers $ LPWLECTAC@# Laminate Lectern, casters $57 Veneer Foundation Lecterns with door, Non-Locking Cabinet 7 9 LPWLECTV@# Veneer Lectern, levelers $ LPWLECTVC@# Veneer Lectern, casters $75 Notes TABLES STEP - *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee)

83 Impression Credenzas Pull Suffix List: (A) Arc STEP (B) Bar A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Includes locks > Impression Foot > 11-degree hinges > Includes adjustable shelf > Ships assembled (except for feet) > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. H1 Credenza H1 Laminate Impression Credenzas, 31"H 3 31 TCL3@# Laminate Impression Credenza, doors, x 3 $ TCL8@# Laminate Impression Credenza, doors, x 8 $ TCL@# Laminate Impression Credenza, doors, x $ TCL7@# Laminate Impression Credenza, doors, x 7 $ TCL@# Laminate Impression Credenza, doors, x $ TCL7@# Laminate Impression Credenza, doors, x 7 $3935 H1 COORDINATING See page 18 for Impression Conference Tables. Buffet Credenza Notes TABLES STEP - (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) Laminate Impression Buffet Credenzas, 3"H 3 TCLB@# Laminate Impression Buffet Credenza, doors/ drawers, x $ TCLB7@# Laminate Impression Buffet Credenza, doors/ drawers, x 7 $811 Veneer Impression Credenzas, 31"H 3 31 TCV3@# Veneer Impression Credenza, doors, x 3 $ TCV8@# Veneer Impression Credenza, doors, x 8 $78 31 TCV@# Veneer Impression Credenza, doors, x $ TCV7@# Veneer Impression Credenza, doors, x 7 $97 31 TCV@# Veneer Impression Credenza, doors, x $ TCV7@# Veneer Impression Credenza, doors, x 7 $1,578 Veneer Impression Buffet Credenzas, 3"H 3 TCVB@# Veneer Impression Buffet Credenza, doors/ drawers, x $1, TCVB7@# Veneer Impression Buffet Credenza, doors/ drawers, x 7 $13,8

84 Impression Lecterns Impression 3"W Command Centers - if Applicable (@) Pull Suffix List: (A) Arc STEP (B) Bar (^) Paint Suffix List G Storm with black casters R Black with black casters S Silver with white casters T Medium Tone with black casters W Arctic White with white casters Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@ enwork.com. > Articulating Lectern top has positions: flat and inclined. Top articulates between positions. > Fixed units are H. Adjustable units are 3 - H. > Cabinet on fixed height unit is W x 3 H x D. Includes one non-locking door and one drawer. > Cabinet on adjustable height unit is W x 5 H x D. Includes one non-locking door. > Basic cabinet includes adjustable shelf. > Tech cabinet includes rack rails (13 RU on adjustable height units, 1 RU on fixed height units), rear locking access door, and vent holes. > Ships assembled. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Articulating Lecterns with Basic Cabinet, with Casters LCL1FC@^# Articulating Lectern, Basic Cabinet, 8 D x W, Fixed Height $377 LCL1AC@^# Articulating Lectern, Basic Cabinet, 8 D x W, Pin Adjustable $353 > Fixed units are H. Adjustable units are 3 - H. > Cabinet on fixed height unit is 3 W x 3 H x D. Includes one non-locking door and one drawer. > Cabinet on adjustable height unit is 3 W x 5 H x D. Includes one non-locking door. > Top is flat. Does not articulate. > Basic cabinet includes adjustable shelf. > Tech cabinet includes rack rails (13 RU on adjustable height units, 1 RU on fixed height units), rear locking access door, and extra vent holes. > Ships assembled. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. COORDINATING See page 18 for coordinating Impression Tables. 3 Command Center with Basic Cabinet, with Casters LCLFC@^# Command Center with Basic Cabinet, 8 D x 3 W, Fixed Height $39 LCLAC@^# Command Center with Basic Cabinet, 8 D x 3 W, Pin Adjustable $3 TABLES STEP - STEP 3 - if applicable A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +$5 Y *Formica Non-Premium (includes 58, 3, +$5 MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. Articulating Lecterns with Tech Cabinet, with Casters LCLFC@^# Articulating Lectern, Tech Cabinet, 8 D x W, Fixed Height $3719 LCLAC@^# Articulating Lectern, Tech Cabinet, 8 D x W, Pin Adjustable $375 Articulating Lectern with Back Panel (no cabinet), with Casters LCL3FC^# Articulating Lectern, 8 D x W, fixed height $119 LCL3AC^# Articulating Lectern, 8 D x W, Pin Adjustable $358 3 Command Center with Tech Cabinet, with Casters LCL5FC@^# Command Center with Tech Cabinet, 8 D x 3 W, Fixed Height $377 LCL5AC@^# Command Center with Tech Cabinet, 8 D x 3 W, Pin Adjustable $371 Traditional Impression Lectern, 9"H LMLECTB@# Lectern, double doors, H Anodized Aluminum feet, D x 7 W $598 Tip: Fixed Top.

85 Impression "W Command Centers - if Applicable (@) Pull Suffix List: (A) Arc (B) Bar STEP (^) Paint Suffix List G Storm with black casters R Black with black casters S Silver with white casters T Medium Tone with black casters W Arctic White with white casters Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. > Fixed units are H. Adjustable units are 3 - H. > Cabinet on fixed height unit is W x 3 H x D. Includes one non-locking door and one drawer. > Cabinet on adjustable height unit is W x 5 H x D. Includes one non-locking door. > Top is flat. Does not articulate. > Basic cabinet includes adjustable shelf. > Tech cabinet includes rack rails (13 RU on adjustable height units, 1 RU on fixed height units), rear locking access door, and extra vent holes. > Ships assembled. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Command Center with One W Basic Cabinet, with Casters LCLFC@^# Command Center with W Basic Cabinet, $8 8 D x W, Fixed Height COORDINATING See page 18 for coordinating Impression Tables. Command Center with One W Basic Cabinet plus One 1 W Basic Cabinet, with Casters LCL8FC@^# Command Center with W and 1 W Basic Cabinets, 8 D x W, Fixed Height $51 TABLES STEP - STEP 3 - if applicable A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +$5 Y *Formica Non-Premium (includes 58, 3, +$5 MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. LCLAC@^# Command Center with W Basic Cabinet, $397 8 D x W, Pin Adjustable Command Center with One W Tech Cabinet, with Casters LCL7FC@^# Command Center with W Tech Cabinet, $3 8 D x W, Fixed Height LCL7AC@^# Command Center with W Tech Cabinet, $19 8 D x W, Pin Adjustable LCL8AC@^# Command Center with W and 1 W Basic Cabinets, 8 D x W, Pin Adjustable $3 Command Center with One W Tech Cabinet plus One 1 W Basic Cabinet, with Casters LCL9FC@^# Command Center with W Tech Cabinet, 1 W Basic Cabinet, 8 D x W, Fixed Height $538 LCL9AC@^# Command Center with W Tech Cabinet, 1 W Basic Cabinet, 8 D x W, Pin Adjustable $8

86 Sensation Credenzas & Lecterns Pull Suffix List: (A) Arc STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Wilsonart Kensington Maple laminate) J Cherry (stained similar to Wilsonart Wild Cherry laminate) N Walnut (stained similar to Wilsonart Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) STEP 3 - Credenza w/ Base Only (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other (B) Bar Tip: Polished aluminum feet are available at no charge. Free form Polished Feet on your order and put a Z in front of the part number. Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@ enwork.com. > Includes locks > Sensation Foot Credenzas include "H straight round feet. Base Credenzas include Sensation aluminum die-cast feet. > 11-degree hinges > Includes adjustable shelf > Ships assembled (except for feet/base) > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. H1 Credenza Buffet Credenza H1 Laminate Sensation Credenzas with Foot, 31"H 3 31 TFL3@# Laminate Sensation Foot Credenza, doors, x 3 $ TFL8@# Laminate Sensation Foot Credenza, doors, x 8 $ TFL@# Laminate Sensation Foot Credenza, doors, x $ TFL7@# Laminate Sensation Foot Credenza, doors, x 7 $ TFL@# Laminate Sensation Foot Credenza, doors, x $ TFL7@# Laminate Sensation Foot Credenza, doors, x 7 $3935 Laminate Sensation Buffet Credenzas with Foot, 3"H 3 TFLB@# Laminate Sensation Foot Buffet Credenza, $11 doors/ drawers, x 7 3 TFLB7@# Laminate Sensation Foot Buffet Credenza, $811 doors/ drawers, x 7 Veneer Sensation Credenzas with Foot, 31"H 3 31 TFV3@# Veneer Sensation Foot Credenza, doors, x 3 $ TFV8@# Veneer Sensation Foot Credenza, doors, x 8 $ TFV@# Veneer Sensation Foot Credenza, doors, x $ TFV7@# Veneer Sensation Foot Credenza, doors, x 7 $ TFV@# Veneer Sensation Foot Credenza, doors, x $ TFV7@# Veneer Sensation Foot Credenza, doors, x 7 $1,5 Veneer Sensation Buffet Credenzas with Foot, 3"H 3 TFVB@# Veneer Sensation Foot Buffet Credenza, $1,97 doors/ drawers, x 7 3 TFVB7@# Veneer Sensation Foot Buffet Credenza, $13, doors/ drawers, x 7 H1 H1 Credenza H1 Laminate Sensation Credenzas with Base, 31"H 3 31 TGL3@#^ Laminate Sensation Base Credenza, doors, x 3 $ TGL8@#^ Laminate Sensation Base Credenza, doors, x 8 $35 31 TGL@#^ Laminate Sensation Base Credenza, doors, x $ TGL7@#^ Laminate Sensation Base Credenza, doors, x 7 $75 31 TGL@#^ Laminate Sensation Base Credenza, doors, x $ TGL7@#^ Laminate Sensation Base Credenza, doors, x 7 $853 Laminate Sensation Buffet Credenzas with Base, 3"H 3 TGLB@#^ Laminate Sensation Base Buffet Credenza, $957 doors/ drawers, x 7 3 TGLB7@#^ Laminate Sensation Base Buffet Credenza, $578 doors/ drawers, x 7 Veneer Sensation Credenzas with Base, 31"H 3 31 TGV3@#^ Veneer Sensation Base Credenza, doors, x 3 $ TGV8@#^ Veneer Sensation Base Credenza, doors, x 8 $83 31 TGV@#^ Veneer Sensation Base Credenza, doors, x $ TGV7@#^ Veneer Sensation Base Credenza, doors, x 7 $1,5 31 TGV@#^ Veneer Sensation Base Credenza, doors, x $1, TGV7@#^ Veneer Sensation Base Credenza, doors, x 7 $11,397 Veneer Sensation Buffet Credenzas with Base, 3"H 3 TGVB@#^ Veneer Sensation Base Buffet Credenza, $1, doors/ drawers, x 7 3 TGVB7@#^ Veneer Sensation Base Buffet Credenza, $1,93 doors/ drawers, x 7 Laminate Sensation Base Lectern with Levelers, 9"H 7 9 LMLECTA@#^ Sensation Lectern, D x 7W, Laminate $99 Tip: Includes adjustable shelf. H1 Buffet Credenza COORDINATING See pages 13 & 13 for coordinating Sensation Tables. TABLES STEP - STEP - Sensation Mobile Lectern Base Only (&) Caster Color Suffix List: B Black G White with Grey Trim +$ Sensation Mobile Lectern Base with Laminate Modesty Back Panel, "D x "W x 35.5"H LME#& Lectern Base with Laminate Panel, Silver $1575 Tip: For "x3" or "x3" Rectangle and Rounded Rectangle top, ordered separately.

87 Stealth Credenzas Pull Suffix List: (A) Arc STEP (B) Bar A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Actual case is.9 D 7.9"H x 5.9/8.9"W. > Credenzas are designed to have back against a wall. Case depth must be altered if used in middle of a space. designteam@enwork.com. > Aluminum Trim compliments Stealth Conference Bases > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Stealth Credenzas, doors, 9"H LYCL@# Laminate Stealth Credenza, D x W $57 LYCL7@# Laminate Stealth Credenza, D x 7 W $1 Laminate Stealth Buffet Credenzas, doors/ drawers, 3"H LYCLB@# Laminate Stealth Buffet Credenza, D x W $78 LYCLB7@# Laminate Stealth Buffet Credenza, D x 7 W $78 Veneer Stealth Credenzas, doors, 9"H LYCV@# Veneer Stealth Credenza, D x W $11,3 LYCV7@# Veneer Stealth Credenza, D x 7 W $11,93 Notes TABLES STEP - (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) Veneer Stealth Buffet Credenzas, doors/ drawers, 3"H LYCVB@# Veneer Stealth Buffet Credenza, D x W $15,1 LYCVB7@# Veneer Stealth Buffet Credenza, D x 7 W $1,

88 Occasional Tables (Complete Tables) Universal Support Furniture (^) Base Finishes List: A Clear Anodized Alum. (Impression only) G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some alternative paint finishes are available. A $35 list set-up fee is charged on orders less than units. Tip: Polished aluminum feet (not columns) are available on Sensation at. This creates a two-tone color scheme. Free form Polished Feet on your order and put a Z in front of the part number. STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -). +$3 Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, 3, +$5 MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +$7 Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) > Occasional Tables include base, top and hardware. Assembled in field. > Table edges are 3mm. Additional edge choices available by contacting designteam@enwork.com. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Laminate Impression Tables LPLSC3^# Impression Laminate Square Coffee Table, 3 D x 3 W x 1 H $118 LPLRC^# Impression Laminate Rectangle Coffee Table, D x W x 1 H $118 LPLRC3^# Impression Laminate Rectangle Coffee Table, 3 D x W x 1 H $115 LPLDE^# Impression Laminate Square End Table, D x W x H $115 Tip: Tables include Impression straight legs. Veneer Impression Tables LPVSC3^# Impression Veneer Square Coffee Table, 3 D x 3 W x 1 H $1787 LPVRC^# Impression Veneer Rectangle Coffee Table, D x W x 1 H $11 LPVRC3^# Impression Veneer Rectangle Coffee Table, 3 D x W x 1 H $15 LPVDE^# Impression Veneer Square End Table, D x W x H $13 Tip: Tables include Impression straight legs. Laminate Sensation Tables LMLAC3^# Sensation Laminate Round Coffee Table, 3 diameter, 1 H $895 LMLBC3^# Sensation Laminate Elliptical Coffee Table, 3 D x W x 1 H $117 LMLDE^# Sensation Laminate Round End Table, dia., H $757 LMLEE18^# Sensation Laminate Elliptical End Table, D x18 W x H $757 Tip: End Tables and Round Coffee Table include X-bases. Elliptical Coffee Table includes Y-base with foot bar. Veneer Sensation Tables LMVAC3^# Sensation Veneer Round Coffee Table, 3 diameter, 1 H $151 LMVBC3^# Sensation Veneer Elliptical Coffee Table, 3 D x W x 1 H $35 LMVDE^# Sensation Veneer Round End Table, dia., H $15 LMVEE18^# Sensation Veneer Elliptical End Table, D x 18 W x H $15 Tip: End Tables and Round Coffee Table include X-bases. Elliptical Coffee Table includes Y-base with foot bar. > Ships assembled. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Universal Triangle Corner Cabinets with Adjustable Shelf, 9"H TDAL318@# Laminate Triangle Corner Cabinet, 18 D x 18 W $13 TDAL3@# Laminate Triangle Corner Cabinet, D x W $13 TDAV318@# Veneer Triangle Corner Cabinet, 18 D x 18 W $358 TDAV3@# Veneer Triangle Corner Cabinet, D x W $81 Tip: Corner Cabinet is freestanding. Universal Wall Mount Cubby Shelves with 11"W cubbies, 1"D THL3# Laminate Cubby Shelf with three cubbies, 3 W x H $875 THL8# Laminate Cubby Shelf, with four cubbies, 8 W x H $973 THL# Laminate Cubby Shelf, with five cubbies, W x H $183 THL7# Laminate Cubby Shelf, with six cubbies, 7 W x H $1 THV3# Veneer Cubby Shelf with three cubbies, 3 W x H $191 THV8# Veneer Cubby Shelf, with four cubbies, 8 W x H $3 THV# Veneer Cubby Shelf, with five cubbies, W x H $77 THV7# Veneer Cubby Shelf, with six cubbies, 7 W x H $38 Tip: Includes mounting cleats Universal Beverage Carts on Casters, "D x 3"W x 38"H LPWCARTA@# Laminate Universal Beverage Cart $1857 LPWCARTV@# Veneer Universal Beverage Cart $739 Presentation Cabinets, 8" x 8" with Whiteboard PCL88@#^ Laminate Presentation Cabinet $88 PCV88@#^ Veneer Presentation Cabinet $533 Tip: Presentation Cabinet Includes: Porcelain Magnetic Whiteboard, Tackboards on doors, flip chart hooks. Mounted by screwing to wall. Attachment hardware not provided. - if applicable (@) Pull Suffix List: (A) Arc (B) Bar STEP A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non-Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. (#) Veneer Suffix List: D Maple (stained similar to Kensington Maple laminate) J Cherry (stained similar to Wild Cherry laminate) N Walnut (stained similar to Cafelle laminate) 8 Walnut (stained similar to Prestige Walnut laminate) 9 Cherry (stained similar to Select Cherry laminate) X Stain Match (add a one-time $7 list +1% Stain Match fee) STEP 3 - Presentation Cabinet Only (^) Fabric Suffix List: > Free form fabric selection. Choose from Camira Era, Mill L, Mill Chicago, or Lucia fabrics. Tip: To view fabric colors or to order samples go to Tip: For COM yardage see page 1. TABLES STEP -

89 Privacy Screens/Modesty Panels - Laminate Pac-Man, All-in-One Privacy/Modesty, and Clamp Screen Only A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates (-38, -) +35% Y *Formica Non-Premium (includes 58, 3, +5% MC, SP, and NT finishes), Formica Premium (WR,, 77,, RD finishes), Pionite Non- Premium, Nevamar Non-Premium, Wilsonart Premium (-7, -1, -18, -5, -78), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. - Tackable Fabrics (?) Fabric Suffix List: Free form fabric selection. Choose from Camira Era, Mill L, Mill Chicago, or Lucia fabrics. Tip: To view fabric colors or to order samples go to Tip: For COM yardage, see page 1. Product Specifications > Clamp Privacy Screens and Modesty Panels 8 W and smaller include two clamps, 5 W and wider include three clamps. > Clamp privacy screens 3-7 W and Modesty Panels are screwed to the underside of the worksurface. > Clamp screens -3 W are designed for side-to-side privacy and screw to the underside of the worksurface front edge (only). Knob attachment is available, designteam@enwork.com > For COM yardage, see page 1. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Part Number Description List Price (US$) Clamp Frosted Acrylic Privacy Screen, 13"H x.5 thick FLPA Frosted Acrylic Clamp Privacy Screen, W $7 FLPA3 Frosted Acrylic Clamp Privacy Screen, 3 W $ FLPA3 Frosted Acrylic Clamp Privacy Screen, 3 W $93 FLPA Frosted Acrylic Clamp Privacy Screen, W $35 FLPA8 Frosted Acrylic Clamp Privacy Screen, 8 W $39 FLPA5 Frosted Acrylic Clamp Privacy Screen, 5 W $9 FLPA Frosted Acrylic Clamp Privacy Screen, W $ FLPA Frosted Acrylic Clamp Privacy Screen, W $35 FLPA7 Frosted Acrylic Clamp Privacy Screen, 7 W $8 Clamp Laminate Privacy Screen, 13"H x.5 thick FLPL# Laminate Clamp Privacy Screen, W $38 FLPL3# Laminate Clamp Privacy Screen, 3 W $35 FLPL3# Laminate Clamp Privacy Screen, 3 W $31 FLPL# Laminate Clamp Privacy Screen, W $388 FLPL8# Laminate Clamp Privacy Screen, 8 W $3 FLPL5# Laminate Clamp Privacy Screen, 5 W $5 FLPL# Laminate Clamp Privacy Screen, W $5 FLPL# Laminate Clamp Privacy Screen, W $531 FLPL7# Laminate Clamp Privacy Screen, 7 W $531 Clamp Whiteboard Privacy Screen, 13"H x.5 thick FLPW Whiteboard Clamp Privacy Screen, W $39 FLPW3 Whiteboard Clamp Privacy Screen, 3 W $35 FLPW3 Whiteboard Clamp Privacy Screen, 3 W $39 FLPW Whiteboard Clamp Privacy Screen, W $31 FLPW8 Whiteboard Clamp Privacy Screen, 8 W $57 FLPW5 Whiteboard Clamp Privacy Screen, 5 W $558 FLPW Whiteboard Clamp Privacy Screen, W $558 FLPW Whiteboard Clamp Privacy Screen, W $595 FLPW7 Whiteboard Clamp Privacy Screen, 7 W $595 Clamp Tackable Fabric Privacy Screen, 13"H x.5 thick FLPF? Tackable Fabric Clamp Privacy Screen, W $335 FLPF3? Tackable Fabric Clamp Privacy Screen, 3 W $31 FLPF3? Tackable Fabric Clamp Privacy Screen, 3 W $39 FLPF? Tackable Fabric Clamp Privacy Screen, W $ FLPF8? Tackable Fabric Clamp Privacy Screen, 8 W $9 FLPF5? Tackable Fabric Clamp Privacy Screen, 5 W $5 FLPF? Tackable Fabric Clamp Privacy Screen, W $55 FLPF? Tackable Fabric Clamp Privacy Screen, W $58 FLPF7? Tackable Fabric Clamp Privacy Screen, 7 W $581 Pac-Man Universal Privacy Screens, Brackets included, 19"H x 3"D UPM# Laminate Pac-Man Privacy Screen $37 UPM Frosted Acrylic Pac-Man Privacy Screen $38 Tip: 3 D Divider covers of worksurface and hangs 8 off. 13 of screen is above worksurface,.75 below worksurface. Tip: Fits all 1.15" - 1.5" thick worksurfaces Universal Privacy Screens -Sided Tackable Fabric, 17 H x 1 thick AAF? Privacy Screen, Tackable Fabric, W $38 AAF3? Privacy Screen, Tackable Fabric, 3 W $38 AAF3? Privacy Screen, Tackable Fabric, 3 W $391 AAF? Privacy Screen, Tackable Fabric, W $ AAF8? Privacy Screen, Tackable Fabric, 8 W $35 AAF5? Privacy Screen, Tackable Fabric, 5 W $5 AAF? Privacy Screen, Tackable Fabric, W $57 AAF? Privacy Screen, Tackable Fabric, W $587 AAF7? Privacy Screen, Tackable Fabric, 7 W $598 Tip: Includes L-brackets, hardware and tackable screen (tackable fabric on both sides). Tip: Must be used in application where L-brackets can attach to the underside of worksurface. Tip: 13 H version available in Grid section of Price List. All-In-One Privacy/Modesty Screen, Double-Sided Laminate,.75" thick UG8# Desk Mounted Privacy/Modesty Screen, 8 W $371 UG# Desk Mounted Privacy/Modesty Screen, W $5 UG7# Desk Mounted Privacy/Modesty Screen, 7 W $533 Tip: Screen attaches to bottom of worksurface and sits behind surface. Screen is 13 above surface and 1 below surface. Tackboards for Laminate All-in-One Privacy/Modesty Screens UG8T? Tackboard for use with UG8 Screen $199 UGT? Tackboard for use with UG Screen $33 UG7T? Tackboard for use with UG7 Screen $77 Tip: Sits above worksurface and faces user. Tip: Tackboard is.75" thick. Tip: Not intended for use on Frosted Acrylic All-in-One Privacy/Modesty Screen. All-in-One Privacy/Modesty Screen, Frosted Acrylic UGAC8 Frosted Acrylic Desk Mounted Privacy/Modesty 8 W $58 UGAC Frosted Acrylic Desk Mounted Privacy/Modesty W $9 UGAC7 Frosted Acrylic Desk Mounted Privacy/Modesty 7 W $75 Clamp Modesty Panel, Frosted Acrylic, 13"H x.5 thick FDMA8 Frosted Acrylic Clamp Modesty Panel, 8"W $33 FDMA5 Frosted Acrylic Clamp Modesty Panel, 5"W $35 FDMA Frosted Acrylic Clamp Modesty Panel, "W $3 FDMA Frosted Acrylic Clamp Modesty Panel, "W $37 FDMA7 Frosted Acrylic Clamp Modesty Panel, 7"W $388 Clamp Modesty Panel, Laminate, 13"H x.5 thick FDML8# Laminate Clamp Modesty Panel, 8 W $ FDML5# Laminate Clamp Modesty Panel, 5 W $ FDML# Laminate Clamp Modesty Panel, W $ FDML# Laminate Clamp Modesty Panel, W $89 FDML7# Laminate Clamp Modesty Panel, 7 W $89 Clamp Modesty Panel, Fabric, 13"H x.5 thick FDMF8? Fabric Clamp Modesty Panel, 8 W $3 FDMF5? Fabric Clamp Modesty Panel, 5 W $8 FDMF? Fabric Clamp Modesty Panel, W $97 FDMF? Fabric Clamp Modesty Panel, W $59 FDMF7? Fabric Clamp Modesty Panel, 7 W $5 TABLES STEP 5 -

90 Modesty Panels and Accessories - Steel Modesty (^) Paint Suffix List G Storm R Black S Silver T Medium Tone W Arctic White Z Other Tip: Some Steelcase, Herman Miller, Knoll, Haworth, and Allsteel paints are available for $35 list fee per order. Call/ for availability of specific colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com. - Laminate Modesty A Wilsonart Kensington Maple (177-) B Wilsonart Monticello Maple (795-38) C Wilsonart Wild Cherry (75-) E Wilsonart Fashion Grey (D381-) F Wilsonart White Tigris (783-) G Wilsonart Cafelle (7933K-7) M Wilsonart Frosty White (1573-) P Wilsonart Slate Grey (D91-) R Wilsonart Black (1595-) U Wilsonart Brazilwood (79-38) V Wilsonart River Cherry ( ) W Wilsonart Designer White (D35-) 3 Formica Neutral Twill (88-58) Formica Bleached Legno (885-58) 5 Formica Prestige Walnut (9-3) 7 Formica Select Cherry (7759-3) X *Wilsonart Non-Premium laminates +1% (-38, -). Orders of 1+ units have no upcharge. Y *Formica Non-Premium Standard (58, +19% 3, MC, SP and NT finishes) and Wilsonart Premium (-7, -1, -18, -5, -78) laminates. Z *Pionite Non-Premium, Nevamar Non- +5% Premium, Formica Premium (WR,, 77,, RD Finishes), and Formica 59-9 Brite White whiteboard laminate. *Add $35 list for Special Laminate orders of less than 1 units. See page 1 for edge selection. > Replacement casters are sold 1 per package. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Fixed Modesty Panels - Perforated Metal with Trough, 9.5 H AMPT3^ Perforated Modesty Panel, 3 W $35 AMPT3^ Perforated Modesty Panel, 3 W $38 AMPT^ Perforated Modesty Panel, W $53 AMPT8^ Perforated Modesty Panel, 8 W $57 AMPT5^ Perforated Modesty Panel, 5 W $8 AMPT^ Perforated Modesty Panel, W $89 AMPT^ Perforated Modesty Panel, W $95 AMPT7^ Perforated Modesty Panel, 7 W $3 Tip: Dimensions are actual. If installing between two legs, then purchase a 1 smaller size. If installing behind two legs, then purchase size to match worksurface. Tip: Freestanding Straights have radiused (.5 ) corners. Plan accordingly. Universal Pivoting Modesty Panel - Mesh, with Wire Management Pocket, 1 H, black AMPM3 Mesh Modesty Panel, 3 W $88 AMPM8 Mesh Modesty Panel, 8 W $3 AMPM Mesh Modesty Panel, W $31 AMPM Mesh Modesty Panel, W $38 AMPM7 Mesh Modesty Panel, 7 W $38 Tip: For use on Flip or Fixed tables. Universal Pivoting Modesty Panels Frosted Acrylic, 9.5"H LGBMB8 Acrylic Modesty Panel, 8 W $3 LGBMB Acrylic Modesty Panel, W $17 LGBMB Acrylic Modesty Panel, W $7 LGBMB7 Acrylic Modesty Panel, 7 W $7 LGBMB9 Acrylic Modesty Panel, 9 W $5 Tip: For use on Flip or Fixed tables. Carts CART Cart for Round Tables, 1 W x 31.5 D x.5 H $1877 CART Cart for Rectangle Tables, 9 W x 31.5 D x 3.5 H $185 Tip: Carts hold 5 Enwork folding tables. Includes heavy duty casters and frame. Portions of the steel frame are covered by Neoprone rubber to help protect tables. Tie Plates UTE 1/ x.5 Tie plates - package of 5 $3 Support Plates USPT x 7.5 Support plate - package of 1 $3 Grommets,.3" Diameter with Covers, Package of five GRMB Grommets, Black $1 GRMG Grommets, Grey $1 GRMW Grommets, White $1 Edging GREDG1 1mm Edging, price per foot $7 GREDG3 3mm Edging, price per foot $8 Tip: Freeform color selection. Standard Enwork edge colors only. Ganging Bracket Packages GBT Ganging brackets for tables with 3mm edge package of, black only $5 TABLES STEP 5 - Universal Pivoting Modesty Panels Perforated Steel, 9.5"H LGBMC8^ Perforated Modesty Panel, 8 W $37 LGBMC^ Perforated Modesty Panel, W $358 LGBMC^ Perforated Modesty Panel, W $37 LGBMC7^ Perforated Modesty Panel, 7 W $37 Tip: GBT Ganging Package includes ganging mechanisms ( ganging parts). Use both ganging mechanisms (one package) to connect two -3 D tables. Tables 18 deep only require one ganging mechanism (1/ package) per pair. Tip: Will not work on tables that have knife edge on all sides. Tip: For use on Flip or Fixed tables. Universal Pivoting Modesty Panels Laminate, 9.5"H AMPL8# Laminate Modesty Panel, 8 W $73 AMPL# Laminate Modesty Panel, W $88 AMPL# Laminate Modesty Panel, W $99 AMPL7# Laminate Modesty Panel, 7 W $39 AMPL9# Laminate Modesty Panel, 9 W $ Tip: For use on Flip or Fixed tables. Replacement Casters for Legs and Bases, Package of one CSTSW 3" White twin wheel locking Caster for Sensation and Gyration. $ CSTSB 3" Black twin wheel locking Caster for Sensation and Gyration. $ CSTMG -1/" Grey locking Caster for Impression (except Command Centers and Lecterns) $ and Sawhorse CSTMB -1/" Black locking Caster for Impression (except Command Centers and Lecterns) $ and Sawhorse CSTCCW 3" White locking Casters for Impression Command Centers and Lecterns $ CSTCCB 3" Black locking Casters for Impression Command Centers and Lecterns $ CSTVB " Black twin wheel locking Caster for Value legs (except Value Flip) $ CSTVFB -1/" Black twin wheel locking Caster for Value Flip $

91 Perimeter Porcelain & Glass Wall-Mount Whiteboards Mobile Whiteboards > Wall-Mounted Glass Whiteboards are 3/1" tempered, low iron glass back-painted Super White. > Note on PO if wall-mount glass whiteboards are for use in side-by-side application. > A freight fee of $1 net is assessed on orders less than $1 net. See page 13. Perimeter Wall-Mounted Rectangle Glass Whiteboards, 8"H DYD88 Glass Whiteboard for Walls, 8 W $17 DYD8 Glass Whiteboard for Walls, W $99 DYD87 Glass Whiteboard for Walls, 7 W $358 DYD89 Glass Whiteboard for Walls, 9 W $35 Tip: Note on PO if ordering for use in side-by-side application. Perimeter Wall-Mounted Rectangle Glass Whiteboards with 15" Marker Tray, 8"H DYG88 Glass Whiteboard for Walls, 15 Marker Tray, 8 W $99 DYG8 Glass Whiteboard for Walls, 15 Marker Tray, W $87 DYG87 Glass Whiteboard for Walls, 15 Marker Tray, 7 W $338 DYG89 Glass Whiteboard for Walls, 15 Marker Tray, 9 W $7 Tip: Includes mounting cleat and hardware. No standoffs. Tip: Two-sided tape included to attach tray to whiteboard. Tip: Note on PO if ordering for use in side-by-side application. Perimeter Wall-Mounted Rectangle Glass Magnetic Whiteboards, 8"H DYE88 Glass Magnetic Whiteboard for Walls, 8 W $88 DYE8 Glass Magnetic Whiteboard for Walls, W $3589 DYE87 Glass Magnetic Whiteboard for Walls, 7 W $3 DYE89 Glass Magnetic Whiteboard for Walls, 9 W $579 Tip: Note on PO if ordering for use in side-by-side application. Perimeter Wall-Mounted Rectangle Glass Magnetic Whiteboards with 15" Marker Tray, 8"H DYH88 Glass Magnetic Whiteboard for Walls, 15 Marker Tray, 8 W $311 DYH8 Glass Magnetic Whiteboard for Walls, 15 Marker Tray, W $371 DYH87 Glass Magnetic Whiteboard for Walls, 15 Marker Tray, 7 W $53 DYH89 Glass Magnetic Whiteboard for Walls, 15 Marker Tray, 9 W $5895 Tip: Includes mounting cleat and hardware. No standoffs. Tip: Requires rare earth magnets. Tip: Two-sided tape included to attach tray to whiteboard. Tip: Note on PO if ordering for use in side-by-side application. Part Number Description List Price (US$) Sensation -Sided Mobile Laminate Whiteboard with Trays, 5"W x 75.5"H, Silver LMD@ -Sided Mobile Laminate Whiteboard $8 Perimeter -Sided Full Mobile Whiteboards, 73.5"H, Satin Aluminum TPMF373 Full Porcelain Magnetic Mobile Whiteboard, 3 W $83 TPMF873 Full Porcelain Magnetic Mobile Whiteboard, 8 W $9 TPMG373 Full White Glass Mobile Whiteboard, 3 W $9 TPMG73 Full White Glass Mobile Whiteboard, W $315 Perimeter -sided Segmented Mobile Whiteboard with Accessory Steel Core Bottom, 73.5"H, Satin Aluminum TPMS373 Segmented Porcelain Magnetic Mobile Whiteboard, 3 W $77 TPMS873 Segmented Porcelain Magnetic Mobile Whiteboard, 8 W $881 TPMH373 Segmented White Glass Mobile Whiteboard, 3 W $98 TPMH873 Segmented White Glass Mobile Whiteboard, 8 W $35 Perimeter Segmented Mobile Whiteboard Accessories, Silver TTR Tool Tray $17 LTH Letter Tray $9 - Sensation Mobile Whiteboard Only (@) Caster Color Suffix List: B Black G White with Grey Trim +$ TABLES STEP 5 - Rare Earth Magnets, Package of Five DYMAGB Rare Earth Magnets, Black $15 DYMAGR Rare Earth Magnets, Red $15 DYMAGW Rare Earth Magnets, White $15 PTH Pencil Box $7 Perimeter Wall-Mounted Porcelain Magnetic Whiteboards with Aluminum Frame and Full Width Marker Tray, 8"H DYF88 Porcelain Whiteboard with Frame for Walls, Marker Tray, 8 W $987 DYF8 Porcelain Whiteboard with Frame for Walls, Marker Tray, W $115 DYF87 Porcelain Whiteboard with Frame for Walls, Marker Tray, 7 W $18 DYF89 Porcelain Whiteboard with Frame for Walls, Marker Tray, 9 W $19 Tip: Includes mounting hardware.