400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet
|
|
- Sabrina Shaw
- 5 years ago
- Views:
Transcription
1 THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for work in fire risk zones, designed for smoke extraction in industrial or similar buildings CPR-0897 Fan: Galvanised sheet steel support base with anti-corrosive treatment. Cast aluminium orientable rotors. Anti-contact protective grille pursuant to standard UNE EN ISO Anti-return hatch in aluminium sheet metal to prevent the entry of water when the fan is not operating. Approved in accordance with standard EN With 0370 CPR 0305 (F400) and 0370 CPR 0973 (F300) certificates. Motor-rotor airflow direction. Motor: Class H motors for S1 continuous operation and S2 emergency use. With ball bearings and class IP55 protection. Three-phase 230/400V. 50Hz. (up to 3 kw) and 400/690V. 50Hz. (powers greater than 3 kw) Maximum temperature of air to be carried: S1 continuous operation 20ºC +40ºC. S2 operation, 300ºC/2h, 400ºC/2h Finish: Anti-corrosive finish of polyester resin polymerised at 190ºC, previously degreased with phosphate-free nanotechnological treatment. On request: Extractor fans with 2-speed motors. 2 and 8-pole fans depending on diameter. Order code 00From size 40 to size 100 THT/ROOF 56 4T 2 F400 THT/ROOF: 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Rotor diameter in cm Number of motor poles T: Three-phase Motor power (c.v.) F-300: Approval. Tested for 300ºC/2h. F400: Approval 400ºC/2h Size 120 THT/ROOF 125 4T/9 24 F400 THT/ROOF: 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Rotor diameter in cm Number of motor poles T: Three-phase Number of blades 3 blades 6 blades 9 blades Motor power (c.v.) F-300: Approval. Tested for 300ºC/2h. F400: Approval 400ºC/2h Technical characteristics Model Speed Maximum admissible current (A) Installed power Angle inclination blades Maximum flow rate Sound pressure level db(a) (1) THT/ROOF-40-4T THT/ROOF-40-6T THT/ROOF-45-4T THT/ROOF-45-6T THT/ROOF-50-4T THT/ROOF-50-6T THT/ROOF-56-4T Approx. weight (r/min) 230V 400V 690V (W) (º) (m3/h) Aspiration Discharge (Kg) 156
2 THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS Technical characteristics Model Speed Maximum admissible current (A) Installed power Angle inclination blades Maximum flow rate Sound pressure level db(a) (1) THT/ROOF-56-4T THT/ROOF-56-4T THT/ROOF-56-6T THT/ROOF-63-4T THT/ROOF-63-4T THT/ROOF-63-4T THT/ROOF-63-4T THT/ROOF-63-6T THT/ROOF-63-6T THT/ROOF-71-4T THT/ROOF-71-4T THT/ROOF-71-4T THT/ROOF-71-6T THT/ROOF-71-6T THT/ROOF-71-6T THT/ROOF-80-4T THT/ROOF-80-4T THT/ROOF-80-6T THT/ROOF-80-6T THT/ROOF-80-6T THT/ROOF-90-4T THT/ROOF-90-4T THT/ROOF-90-4T THT/ROOF-90-6T THT/ROOF-90-6T THT/ROOF-90-6T THT/ROOF-100-4T THT/ROOF-100-4T THT/ROOF-100-4T THT/ROOF-100-4T THT/ROOF-100-6T THT/ROOF-100-6T THT/ROOF-100-6T THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-4T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ THT/ROOF-125-6T/ Approx. weight (r/min) 230V 400V 690V (W) (º) (m 3 /h) Aspiration Discharge (Kg) (1) The noise level values are pressures in db(a) measured at a distance of 6 metres in a free field. 157
3 THT/ROOF Acoustic characteristics ROOF-MOUNTED SMOKE EXTRACTOR FANS Values taken during aspiration with maximum flow rate Noise power spectrum Lw(A) in db(a) per Hz frequency band. Values taken during discharge with maximum flow rate Model Model , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Dimensions mm Model A B C D ØF G H ØI THT/ROOF THT/ROOF THT/ROOF THT/ROOF THT/ROOF THT/ROOF THT/ROOF THT/ROOF THT/ROOF THT/ROOF
4 40 4T 159
5 40 6T 160
6 45 4T 161
7 45 6T 162
8 50 4T 163
9 50 6T 164
10 56 4T 165
11 56 6T 166
12 63 4T 167
13 63 6T 168
14 71 4T 169
15 71 6T 170
16 80 4T 171
17 80 6T 172
18 90 4T 173
19 90 6T 174
20 100 4T/6 175
21 100 6T/6 176
22 125 4T/3 177
23 125 4T/6 178
24 125 4T/9 179
25 125 6T/3 180
26 125 6T/6 181
27 125 6T/9 182
28 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics [º] PN MC EC VSD Blade angle of inclination in degrees Nominal motor power in kw Measurement category Efficiency category S Static T Total Variable speed drive SR Specific ratio ηe[%] Efficiency N Efficiency grade [kw] Electric power [m 3 /h] Flow rate [mmh 2 O] Static or total pressure (based on EC) [RPM] Speed 40-4T A S A S A S A S A S A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % B T NO % T A S A S A S A S A S A S A S A S A S A S A S A S B T T A S A S A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % B T NO % B T NO % B T NO % B T NO % B T NO %
29 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics 45-6T A S A S A S A S A S A S A S A S A S A S A S NO % B T NO % B T NO % B T NO % B T NO % B T NO % T A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % T A S A S A S A S A S NO % A S NO % A S NO % A S NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO %
30 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics 56-4T A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % T A S A S A S A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % A S NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO %
31 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics 63-6T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % B T NO % B T NO % B T NO % B T NO % T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO %
32 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics 80-4T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % T 8 3 C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO %
33 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics 100-4T 8 4 C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % T C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % T/ C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO %
34 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics 125-4T/ C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % T/ C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % T/3 8 3 C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO %
35 HTMV THT/ROOF Erp. Best efficiency point (BEP) characteristics 125-6T/6 8 4 C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % T/ C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % C S NO % B T NO % B T NO % Accessories See accessories section. INT IAT CABLE BOX C2V AET AR CENTRAL CO VSD RT 190
Multifunctional 400ºC/2h and 300ºC/2h roof fans
HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544
More informationAxial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.
CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More informationRobust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
HCH HCT HCH HCT Order code Robust wall-mounted axial or long-cased fans Robust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
More informationTHT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationAxial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.
HCH HCH Extremely robust wall-mounted, axial or tubular fans Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor. Fan: Airflow direction from
More informationCJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation
CJBD/AL CJBD/ALS CJBD/ALF CJBX/AL CJBX/ALS CJBX/ALF VENTILATION UNITS WITH ALUMINIUM PROFILES According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBD/AL: Soundproofed ventilation units with profiles in
More informationHEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS
HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment and
More informationCMR/EW EFFICIENT WORK
CMR/EW AC VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/A-RFM. VSD3/A-RFT Supply on request CONTROL Supply optional accesory SUPPLY VSD1/A-RFM: 220-240 V 50/60 Hz VSD3/A-RFT: 380-415 V 50/60 Hz
More informationCMP-L/EW B T D. Industrial Brushless Motors E.C. Motor power (CV) Three-phase VSD 400 V50/60 Hz. electrical power Maximum.
CMP-L/EW BRUSHLESS INDUSTRIAL BRUSHLESS MOTOR E.C. VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/B. VSD3/B Supply included with fan CONTROL Supply optional accesory SUPPLY VSD1/B: 220-240 V 50/60
More informationHCH-HCT/EW EFFICIENT WORK. Wall-mounted or long-cased axial fans fitted with high-efficiency IE3 asynchronous motor adjustable electronically.
HCH-HCT/EW AC HIGHLY EFFICIENT IE3-COMPLIANT THREE-PHASE MOTORS AC VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/A-RFM. VSD3/A-RFT Supply on request CONTROL Supply optional accesory SUPPLY VSD1/A-RFM:
More informationCMP/EW EFFICIENT WORK
CMP/EW High-efficiency centrifugal single-inlet, medium-pressure fans with a direct motor and impeller with forward-facing blades fitted with IE3 asynchronous motor adjustable electronically. AC HIGHLY
More informationCRL. MADE OF SHEET STEEL TURBINE WITH REACTION BLADES LOW NOISE LEVEL IE3 > 0.75kw MOTORS ENERGY SAVING MOTORS CRL MEDIUM PRESSURE CENTRIFUGAL FANS
CRL MADE OF SHEET STEEL TURBINE WITH REACTION BLADES LOW NOISE LEVEL IE3 > 0.75kw MOTORS ENERGY SAVING MOTORS CRL MEDIUM PRESSURE CENTRIFUGAL FANS CRL Medium pressure, single-stage aspiration fans with
More informationHigh-efficiency long-cased axial fans fitted industrial Brushless motor E.C. Fibreglass-reinforced plastic impeller.
HEPT/EW with High-efficiency long-cased axial fans fitted industrial Brushless motor E.C. BRUSHLESS MOTOR BRUSHLESS INDUSTRIAL E.C. Fibreglass-reinforced plastic impeller. Fan: Airflow direction from motor
More informationHCH/ATEX: Robust wall-mounted axial fans with ATEX certification HCT/ATEX: Robust long-cased axial fans with ATEX certification
HCH/ATEX HCT/ATEX HCH/ATEX: Robust wall-mounted axial fans with ATEX certification HCT/ATEX: Robust long-cased axial fans with ATEX certification Circular axial fans (HCH) or Long-cased fans (HCT) with
More informationCentrifugal medium-pressure fans fitted with multi-blade
CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in
More informationUDT UDTX FILTRATION UNITS AND AIR TREATMENT MODULES
MF: Filtration Modules UDT ME: Modules with electrically heated coils MA: Modules with water coils UDTX UDT UDTX FILTRATION UNITS AND AIR TREATMENT MODULES According EU Regulation UDT UDT Soundproofed
More informationCJSX-SILENT 400º/2H BELT-DRIVEN EXTRACTION UNITS SOUNDPROOFED DOUBLE-WALL OF SOUNDPROOFING 40 MM THICK
CJSX-SILENT 400º/2H BELT-DRIVEN EXTRACTION UNITS SOUNDPROOFED DOUBLE-WALL OF SOUNDPROOFING 40 MM THICK CJSX- SILENT 400ºC/2h single-inlet belt-driven extraction units, in pre-lacquered sheet metal, double-wall
More informationCJBX CJBX/AL. Options. Order code CJBX 15/15 4. Technical characteristics
CJBX CJBX/AL CJBX: Belt-driven acoustically-insulated ventilation units. CJBX/AL: Belt-driven ventilation units with aluminium profiles and prefinished sheet steel and acoustic insulation. CJBX Options
More informationTSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.
TSA TSAT CJTSA TSA: Single inlet, belt-driven centrifugal fans with shaft outlet and forward-curved impeller. TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors, a set of pulleys
More informationFans for ATEX EXPLOSIVE ATMOSPHERES
Fans for ATEX EXPLOSIVE ATMOSPHERES An ATEX area is a mixture of air and inflammable gas, the vapour of an inflammable liquid, a fog of combustible liquid or combustible powder, which, if they catch fire,
More informationINDUSTRIAL BRUSHLESS MOTORS E.C. INDUSTRIAL EFFICIENT MOTORS IE3
INDUSTRIAL MOTORS E.C. INDUSTRIAL EFFICIENT MOTORS IE3 OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment
More informationPlate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
More informationCSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller
CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 122 m 3 /h for wall mounting Low pressure axial fans in the steel casing
More informationFRF FRF/EW ROOF-MOUNTED CENTRIFUGAL EXTRACTOR FAN WITH VERTICAL AIR OUTLET
FRF EXTERNAL ROTOR MOTOR ALUMINIUM STRUCTURE AND BOX THERMAL AND ACOUSTIC INSULATION BUILT-IN SAFETY SWITCH BUILT-IN WATER OUTLET DRAIN FRF/EW EFFICIENT WORK HIGH EFFICIENCY FAN E.C. BRUSHLESS INDUSTRIAL
More informationMedium Pressure Centrifugal Fans
Medium Pressure Centrifugal Fans 2012 Edition ...About Axair Fans UK Application Knowledge: Over 20 years experience in general air movement; including corrosive, explosive and hot fume handling. Stock
More informationCONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
More informationVORTICENT C E RANGE Centrifugal fans
NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationCHMT Series, F Rated Fans
CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke
More informationWINDER. Impellers with higher efficiency and less sound level
WINDER Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
More informationPLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
More informationCMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced
CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to
More informationsupplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
More informationHXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
More informationCOMPACT Series type HCFB / HCFT (Plastic impellers)
Plate mounted axial flow fans COMPACT HCFB/HCFT PLATE MOUNTED AXIAL FLOW FANS COMPACT Series type HCFB / HCFT (Plastic impellers) 0 017582 603079 Compact design Corrosion resistance Flame retardant terminal
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationRADIAL STEEL HIGH PRESSURE RHD 5/ RHD 4/ RHD 8/ RHD 11/ RHD 9/ RHD 13/ CAS... 8 CAM ACCESSORIES...
RADIAL STEEL HIGH PRESSURE RHD 5/10... 2 RHD 4/20... 3 RHD 8/25... 4 RHD 11/40... 5 RHD 9/60... 6 RHD 13/90... 7 CAS... 8... 14 ACCESSORIES... 18 1 RHD 5/10 A 230 / B 335 / C 385 / D 130 / E 140 / F 360
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationBELT DRIVEN CABINET FANS CVTT Series
Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal
More informationErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR
13 POWERBOX EC FANS - ESTOC EC FEATURES Sizes from 3 to 3 mm diameter Air flow up to.1 m 3 /s Static pressures up to Pa Controllable EC motors Multiple outlet orientations ELECTRICAL SUPPLY 22-2V/Hz/1f
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationEDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM
AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 0 015982 603071 Installation examples Ceiling or wall mounting Extract ventilation through short duc extract ventilation Extract ventilation
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box
ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All
More informationCENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
More informationVENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
More informationCENTRIFUGAL FANS IN-LINE DUCT EXTRACTORS CENTRIFUGAL FANS AND IN-LINE DUCT EXTRACTORS. According EU Regulation
CENTRIFUGAL FANS IN-LINE DUCT EXTRACTORS CENTRIFUGAL FANS AND IN-LINE DUCT EXTRACTORS According EU Regulation OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends
More informationACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans
Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and
More informationMegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
More informationBOX BLB Centrifugal Box Fan
Centrifugal Box Fan Select models available for next day delivery Product Overview 3 sizes from 260mm to 400mm Air volume flow rates up to 0.751m³/s Static pressures up to 733 Pa Suitable for operating
More informationCONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,
RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from
More informationGigaBox centrifugal fans Product specific information
GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,
More informationCVHT Series - F rated cabinet fans
N 50-55 1/1/08 19:26 Página 50 BLT DRIVN BINT NS Series - 00 120 rated cabinet fans NW pproved to N12101- standard Range of belt drive cabinet fans designed for smoke extraction in fire conditions and
More informationCYCLONE F 400 smoke extraction casing
Fire protection CYCLONE F smoke extraction casing Presentation of the CYCLONE F range (12) WHY CHOOSE A CYCLONE F? In order to fulfil the requirements of the CE markings (EN 1211-3 and the French governmental
More informationTD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans
IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester
More informationCRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS
ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire
More informationHeat recovery ventilators with rotating exchanger, automatic control and EC motor, designed for vertical ducts and installation in technical room
RIRS V EKO Heat recovery ventilators with rotating exchanger, automatic control and EC motor, designed for vertical ducts and installation in technical room Common characteristics: Efficient low-noise
More informationACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
More informationDIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
More informationPerformance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
More informationROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More informationTerminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.
EuroSeries (ESR) Cowl & base moulded from recyclable polymeric material All sizes resistant to UV light Sizes 250 to 1000 dia are protected to IP54 Optional backdraught shutters and bird guard (250-630mm)
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries certifies that the KAT series : version S and - model 9-7 to
More informationMIXVENT-TH Series Mixed Flow Fans
ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans 0 021682 603075 P P L I T I O N S Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured
More informationCBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
More informationCBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).
More informationCHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
More informationCYLINDRICAL CASED AXIAL FLOW FANS
- Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate
More informationCentriflow Plus EC. Technical data
Technical data Centriflow Plus CTLOGUE Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Inlet cone and supporting frame...5 EC motor...5 ir flow sensor...6
More informationEnergy-saving motors (ESM)
Energy-saving motors (ESM) Technology Accessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans A series fans Energy-saving motors (ESM) 316 Air performance curves 3 Energy-saving
More informationAC axial fan. sickled blades (S series) Wall ring with guard grille
W4E3-DN2-39 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
MIXVENT-TH ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength
More informationAATVP. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES:
AATVP HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES: Accessories Fan made of Fe36 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved
More informationAXICIAT VA. Axial fans. Smoke extraction F200/120 and F400/120. High available pressure
Smoke extraction F200/120 and F400/120 A complete range from 1250 to 95000 m 3 /s High available pressure Blade with variable pitch on stop APPLICATION Extraction or introduction of non-loaded air in the
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationAC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
More informationNEW GENERATION SERIES
FEATURES The New Generation Series of axial roof units are fitted with adjustable pitch impellers enabling a wide performance range to be obtained from any one unit. Construction Galvanised steel base,
More informationREVOLUTION SLCX Product Brochure
REVOLUTION SLCX Brochure Available for next day delivery with ELTA SELECT ATEX Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
More informationNEW Slimpak EC Box Fan (SLPT EC)
NEW Slimpak EC Box Fan (SLPT EC) Compact low profile design Duct Sizes 100 500mm Performance - Airflow 0.01 to 1.2m 3 /s, Pressure up to 650Pa Latest energy saving EC/DC motors Internal mounting IPX2 Manufactured
More informationMTD Silent Series MIXED FLOW IN-LINE DUCT FAN
MT Silent Series MIX LOW IN-LIN UT N Mixed low In-Line uct an MT Silent Series MT Silent 100/2~200/2 MT Silent 250~315 Low profile Mixed-flow fans with sound- absorbent insulation. xtreme ly quiet. General
More informationMax. airflow m 3 /s Diam. min. Diam. max
Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89
More informationCENTRIFLOW 3D WITH EC MOTOR >> Technical catalogue
CENTRIFLOW 3D Plug Fan WITH EC MOTOR >> Technical catalogue air comfort CentriFlow 3D 2 GMEC CentriFlow 3D - Technical Catalogue Contents GENERL Description and survey chart pplication... 3 General Survey
More informationEDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc
AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 Ceiling or wall mounting extract ventilation Extract ventilation through wall or using a shunt duct system All V models incorporate all accessories
More informationLOW-PRESSURE CENTRIFUGAL FANS WITH MULTI-BLADE OR BACKWARD-CURVED IMPELLERS. According EU Regulation
LOW-PRESSURE CENTRIFUGAL FANS WITH MULTI-BLADE OR BACKWARD-CURVED IMPELLERS According EU Regulation OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation
More informationAC axial fan. sickled blades (S series) with full square nozzle
WD5-GA-9 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
More information