Hyundai/Kia multi-kit CF-123KI

Transcription

1 KIT FEATURES INSTALLATION INSTRUCTIONS FOR PART CF-123KI ISO Head unit provision with pocket DDIN Head unit provisions Painted KIT COMPONENTS APPLICATIONS See application list inside Hyundai/Kia multi-kit CF-123KI A) (4) DDIN Brackets B) (3) DDIN Trim Plates C) Pocket D) (4) Phillips screws A B C D WIRING & ANTENNA CONNECTIONS (Sold Separately) Wire harness: Hyundai/Kia harness Hyundai 2006-up/KIA harness 2004-up Hyundai / Kia Harness GM Harness Hyundai / Kia Harness Antenna adapter: 40-KI11 - KIA antenna adapter 2007-up 40-KI10 - KIA antenna adapter 2007-up TOOLS REQUIRED Panel Removal Tool Phillips Screwdriver Socket Wrench METRA. THE WORLD S BEST KITS metraonline.com COPYRIGHT METRA ELECTRONICS CORPORATION

2 CF-123KI Hyundai Accent Elantra Elantra (radio delete) Santa Fe Applications Hyundai (cont.) Sonata Tiburon Tucson XG 300/350 Kia Optima (2006 early production models only) Rio Sportage Table of Contents Dash Disassembly Hyundai Accent/Kia Rio Hyundai Elantra Hyundai Elantra Hyundai Elantra (radio delete) Hyundai Santa Fe Hyundai Sonata Hyundai Sonata Hyundai Sonata Hyundai Tiburon Hyundai Tiburon Hyundai Tucson Hyundai XG300/ Kia Optima (2006 early production models only) Kia Sportage 12 Kit Assembly Bracket tab application chart 13 ISO DIN head unit provisions 14 DOUBLE DIN head unit provisions 15 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer Also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWE Enhance your installation and fabrication skills b enrolling in the most recognized and respected mobile electronics school in our industry. Log onto or call for more information and take ste toward a better tomorrow. Metra recommends MECP certified technicians

3 1. Unclip and remove the trim panel surrounding the radio and including the a/c vents. () 2. Remove (4) Phillips screws securing the radio. (Figure B) Dash Disassembly CF-123KI Hyundai Accent/Kia Rio Figure B 3

4 Dash Disassembly CF-123KI Hyundai Elantra 1. Unclip and remove the dimmer switch panel then remove (1) Phillips screw exposed behind. () 2. Unclip and remove shifter trim panel. 3. Remove (1) Phillips screw at bottom of radio trim panel. () 4. Unclip and remove the temperature control cable under the drivers side dash from the white plastic bracket. 5. Remove (4) Phillips screws securing radio Hyundai Elantra 1. Remove (2) Phillips screws from under the instrument cluster. 2. Remove ashtray then remove (2) Phillips screws in ashtray cavity. 3. Unclip and remove panel surrounding radio. () 4. Remove (4) Phillips screws securing radio. 4

5 A/C Dash Disassembly CF-123KI Hyundai Elantra (radio delete) 1. Unclip and remove the panel surrounding the radio including the a/c vents and hazard button. () 2. Remove (4) Phillips screws to remove radio. (Figure B) Figure B 5

6 Dash Disassembly CF-123KI Hyundai Santa Fe 1. Remove the ashtray and the (2) Phillips screws exposed in the cavity. 2. Unclip and remove trim panel with climate controls. 3. Remove (2) Phillips screws facing up at bottom of radio trim panel. 4. Unclip and remove the radio trim panel. 5. Remove (4) Phillips screws securing the radio Hyundai Sonata 1. Unclip and remove trim panel around the shifter. 2. Remove (1) Phillips screw at bottom of radio trim panel. 3. Unclip and remove radio trim panel. () 4. Remove (4) Phillips screws securing the radio. 6

7 Dash Disassembly CF-123KI Hyundai Sonata 1. Unclip and remove the trim panel in front of the shift lever and remove (2) Phillips screws exposed underneath. 2. Unclip and remove the shift lever trim panel. 3. Remove (2) Phillips screws at bottom of radio trim panel. 4. Unclip and remove radio trim panel. () 5. Remove (4) Phillips screws securing the radio Hyundai Sonata 1. Unclip and remove entire panel surrounding radio. () 2. Remove (4) Phillips screws securing radio 7

8 Dash Disassembly CF-123KI Hyundai Tiburon 1. Unclip and remove the panel surrounding the shift lever. 2. Unclip and remove the radio trim panel. () 3. Remove (2) Phillips screws securing the radio Hyundai Tiburon 1. Unclip and remove the radio trim panel starting with the bottom edge. () 2. Remove (2) Phillips screws securing radio. 8

9 Dash Disassembly CF-123KI Hyundai Tucson 1. Remove screw cover from back side of shift knob and remove (2) Phillips screws. Lift straight up on shift knob to remove. () 2. Unclip and remove shift knob trim panel. (Figure B) 3. Remove (10) Phillips screws from dash support under shift knob trim panel and remove. (Figure C) 4. Remove (1) Phillips screw from bottom center of trim panel surrounding radio including a/c controls then unclip and remove panel. 5. Remove (4) Phillips screws to remove radio. Figure B Figure C 9

10 Dash Disassembly CF-123KI Hyundai XG300/ Unclip and remove entire panel surrounding radio and climate controls including pocket assembly at bottom of panel. () 2. Remove (4) Phillips screws per side to remove radio and climate control. Note: It is not necessary to remove the climate control. (Figure B) Figure B 10

11 Dash Disassembly CF-123KI 1. Unclip and remove entire panel surrounding radio. () Kia Optima (2006 early production models only) 2. Remove (4) Phillips screws securing radio.) Note: The rear support bar in the sub dash will need to be cut and removd for aftermarket radio clearance. (Figure B) Figure B 11

12 Dash Disassembly CF-123KI Kia Sportage 1. Unclip and remove the entire panel surrounding the radio and including the A/C controls. Note: Start at bottom of panel. () 2. Remove (4) Phillips screws securing the radio. (Figure B) Figure B 12

13 Kit Assembly CF-123KI All Vehicles Cut and remove all tabs except the ones necessary for your application from the appropriate bracket according to the chart. Bracket Set # Use Tab Trim Plate Applications 1 A T KI Hyundai Elantra, Hyundai Sonata, Hyundai Tiburon, Kia Optima 1 B T KI Hyundai XG300/350 1 C T KI Kia Sportage 1 D T KI Kia Rio & Hyundai Accent 2 E T KI Hyundai Elantra, Hyundai Sonata, Hyundai Tiburon, Hyundai Sante Fe 2 F T KI Hyundai Tucson 2 G T KI Hyundai Elantra (radio delete) Bracket #1 D C Bracket #2 G F A E B E 1 2 A D F G Note: Kia Rio: Cut and remove shaded area #1 Hyundai Accent: Cut and remove shaded area #2 Drivers side shown, passenger side is mirror image. 13

14 Kit Assembly CF-123KI ISO DIN head unit provisions 1. Determine which trim plate to use according to the chart and attach the brackets to the trim plate. () 2. Slide the pocket into the bottom opening of the trim plate/bracket assembly and secure the pocket using the included (4) 3/8 Phillips screws. (Figure B) 3. Slide the head unit into the opening above the pocket and secure using the hardware that came with the head unit. (Figure C) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Reassemble dash in reverse order of disassembly. Figure B Figure C 14

15 Kit Assembly CF-123KI Double DIN head unit provisions 1. Determine which trim plate to use according to the chart and attach the brackets to the trim plate. () 2. Slide the Double DIN head unit into the trim plate/bracket assembly and secure the Double DIN head unit to the assembly using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 4. Reassemble dash in reverse order of disassembly. Figure B 15

16 INSTALLATION INSTRUCTIONS FOR PART CF-123KI REV. 3 /31/11 METRA. THE WORLD S BEST KITS metraonline.com COPYRIGHT METRA ELECTRONICS CORPORATION