s e a t i n g price list

Transcription

1 s e a t i n g price list january 2016

2 seating alphabetical index ace 8 affiliate 29 alex 44 algonquin 44 allée 29 alta amri 45 anne 29, 45 apel 12 argon aria 29 aro 9 atlantic 45 audio 30 avant 31 b b.2 51 b.3 51 balance 15, bannok 15 bardot blaine blaine calibra cardan 23 caron 10 carson 31 catherine 57 celon 31 chase 58 chiara 58 cinema claris 32 clark 32 code colours corvo 32 coterie 108 cp.1 16, 108 cp.2 16, 109 cycle 17 delaney 33 dillon 33 dollar 33 duet edge 109 edit egalité 18 entrada 110 fly 18 forest 10 forum 35 gaia go 35 graphica 115 harper 115 helium 35 hyphen 36 item laine 11 laurel 19 league levy 36 lido lilt 121 loft 121 madeleine 121 manhasset 122 mesa 122 milix 123 mills mirador 19, mitt 143 miura 144 moreau morganton 38 orbit orly 147 oslo 147 oxford 148 pause 19 pierce 148 pillar 149 pilot 26 portrait 149 remix 149 remy 149 rice 27 sedona 39 sempre 39 sentry 28 session 39 sonar 40 st. etienne 41 st. germain 11, 41 st. michel 41 stacking cart 43 strada 41 studio 11, 42 union 150 vanish 11 ven 42-43, vika 151 washington 43 whisper 43 workshop 20, 152 zoe 11 alphabetical index of bernhardt textiles ace 156 allude 159 bark 155 bern 155 block 154 brisa 159 cameo 158 chat 153 circle 156 coast 157 cornwall 156 croquet 156 cross stitch 153 cue 158 current 155 dani 156 dash 154 dialogue 156 downtown 153 drift 158 envoy 154 essential 159 finesse 159 flash 153 flex 156 flicker 154 flight 153 flip 156 focus 156 fundamental 159 groove 155 halftone 153 haven 158 hero 154 hitch 157 image 159 impression 159 improv 155 interlaken 155 kaleidoscope 154 link 156 live wire 153 lustre 155 makoto 157 maven 156 maverick 157 merit 157 mesh 155 metro 155 mighty 159 mix 157 muse 158 net 154 network 153 nova 154 parkway 153 pavement 156 pinball 158 pinpoint 155 plain I 155 plain II 155 pop 157 posh 158 prize 155 quake 155 radar 159 rapina 156 rogue 159 rumor 154 savvy 158 scribble 156 script 155 seeing stars 154 sequence 155 sheridan 158 shimmer 158 shuffle 157 snap 153 spin 156 splice 153 spree 156 sprint 155 stitch 154 stone 155 time 154 trophy 156 uptown 153 urban 153 valencia 158 verve 156 vignette 157 warren 157 wing 154 wing ll 154 wizard 158 zigzag 156 zoom 153 2

3 seating numerical index 538, 539 sentry forum oslo atlantic , 545, 546 pilot affiliate , 2512B lilt blaine cardan session , 2536, 2542, 2540 cycle LTB, -LTS, -LTW blaine , 560, 562, 564 rice zoe AS, -BS, -BF b RTB, -RTS, -RTW blaine , 561, 563, 565 rice caron AS, -BS, -BF b , 6460 blaine , 571, 572, 573 duet allée AS, -BS, -BF b blaine , 575, 576, 577 duet sempre AS, -BS, -BF b alex , 582, 584 alta , 1711 corvo AS, -BS, -BF b , 6485 mills F, 582F, 584F alta helium AS, -BS, -BF b LTB, -LTS, -LTW mills , 583, 585 alta washington P b RTB, -RTS, -RTW mills F, 583F, 585F alta st. etienne AS, -BS, -BF b LTB, -LTS, -LTW mills SG, 1011SW go st. michel P b RTB, -RTS, -RTW mills , 1041 oxford st. germain 11, AS, -BS, -BF b , 6487LTB, -LTS, -LTW mills sedona harper b RTB, -RTS, -RTW mills , 1061 oxford anne 29, remy , 6501B cp , 1102, 1103G orbit dillon , 4655, 4657 milix , 6502B cp R, 1103W orbit clark , 4671, 4672, 4673 fly , 6503B, cp.1 16, stacking cart , 1995P, 1996 avant , 4701 vika , 6504B cp.2 16, B, -O, -R, -W audio bannok , 4713 pillar , 6505B cp.1 16, hyphen , 2105, 2107 code madeleine , 6506B cp.2 16, , 1126U sonar , 2130 code , 4733, 4734 ven 42-43, mesa , 1127U, 1128 sonar , 2135 code , 4745, 4747 bardot laurel T, -W, 1131W levy , 2137 code catherine , 6815, 6817 entrada edit L, 2191R, 2171L, 2171R code chiara , 6837 orly F, 1151, 1151F, 1152 edit L, 2191R, 2175L, 2175R code , 4762 amri , 6852H balance edit L, 2197R, 2177L, 2177R code cimena L, -LH, -R, -RH balance G, 1170W, 1170WC ace , 2160 code cinema , 6857L, 6857R balance G, 1171W, 1171WC ace , 2165 code colours , 6861 balance 15, morganton C, 2105C, 2107C code , 5565, 5567 miura , 6867 balance 15, C studio C, 2130C code , 5712B calibra pierce CS studio 11, C, 2135C code , 5715B calibra S, 6902F b dollar C, 2137C code , 5717B calibra S, 6903F b , 1461 strada LC, -RC, 2171LC, -RC code , 5720L mitt edge C lido LC, -RC, 2175LC, -RC code , 5721L mitt , 7022A, 7025 moreau C, 1467C, 1468B, -G, -R, lido LC, -RC, 2177LC, -RC code , 5821, 5822 argon A, 7027, 7027A moreau aria C, 2160C code , 5823W argon mirador delaney C, 2165C code , 5832, 5833 argon A, 8041A, 8042A mirador19, carson , 2205, 2207 gaia W, 5834W argon coterie , 1519, 1520 aro , 2225 gaia pause , 8312B league , 1522, 1523 aro , 2227 gaia , 5850L, 5850M apel , 8315B, 8317 league , 1526 celon gaia ML, 5851, 5851L apel B league forest P, 2291P gaia L, 5900R, 5901CL item , 8323 union M, -W, 1529 forest , 2305, 2307 gaia WW, -NW, 5904L item egalité whisper , 2325 gaia R, 5905, 5901CH item , 9005, 9007 manhasset vanish , 2327 gaia LW, 5903RW item , 9035, 9037 graphica , 1545B laine loft A, 6111A workshop 20, , 9055, 9057 algonquin claris remix B, 6111B workshop 20, , 9227 portrait chase 58 3

4 seating terms and conditions Prices and Specifications Prices and specifications are subject to change without notice. All prices quoted will be FOBour factories. If applicable, sales tax will be based on ship-to destination. Bernhardt Design reserves the right to make changes in dimensions, design and/or construction, price lists, or product literature without prior notice. Order Entry All orders are subject to final acceptance by Bernhardt Design in Lenoir, NC. Receipt of our acknowledgment indicates acceptance of your order subject to the terms set forth on the acknowledgment. Bernhardt Design attempts to clarify all purchase orders. However, in the event the price list number and description on the purchase order differ, the price list number will prevail. Changes / Cancellation All orders in production are considered firm orders and are not subject to changes or cancellation. Shipping Bernhardt Design will ship in accordance with customer instructions whenever possible. If not specified, Bernhardt Design will exercise its best judgement in selecting a carrier. Orders in production will be shipped as scheduled and cannot be held. Storage If a customer is unable to accept an order when it is ready for shipment, storage may be requested. Acceptance of storage will be at the discretion of Bernhardt Design. All costs including transportation will be at customer expense. A storage charge of 1 % of the invoice will be assessed for every 30 days, or any part thereof, that merchandise remains in storage. Bernhardt Design considers transfer to storage the equivalent of delivery. This includes invoicing and payment. Customers will bear all risk of damage or loss during storage. Freight Damage and Claims Bernhardt Design is not liable for any damages to products that occur during transit or storage. The carrier assumes all responsibility upon acceptance of product. It is the customer s responsibilty to inspect products upon receipt and file any claims with the carrier. No product should be refused. If products are received damaged, a written exception should be made on the bill of lading and an immediate inspection be requested of the carrier. Concealed damage must be reported to the carrier within 15 days of receipt. Failure to make claims shall constitute acceptance of the products and waiver any claims of defects, errors or shortages. In the event delivery is made on a Bernhardt Design truck, the products should be carefully inspected for transit damage. If contents are damaged, the driver should be notified to call his dispatcher for immediate disposition. Concealed damage must be reported within 15 days of receipt and product/packaging held for inspection by a Bernhardt Design representative. Replacements for product damaged in shipment or storage will be manufactured upon receipt of a purchase order. Returns No merchandise may be returned to Bernhardt Design without written consent in the form of a Return Authorization from our Quality Assurance Department, stating why the item is being returned and how the item will be shipped. Unauthorized returns will be automatically refused by our receiving department as well as returns not in accordance with Bernhardt Design shipping instructions. Liability for defective merchandise shall be limited to the replacement or repair of that merchandise, and Bernhardt Design shall not be liable for other damages or losses. Measurements and Weights All measurements and weights are approximate and subject to change without notice. Warranty Bernhardt Design will repair or replace, at its discretion and without charge to the original purchaser, any seating product or part thereof which fails as the result of defects in material and workmanship, under single shift use and normal care, for five years from date of shipment, with the exception of guest and stacking chairs which will be warranted for three years. This warranty does not cover misuse or abuse of product, damages caused by contact with tables, desks or other surfaces, or normal wear associated with use of product. Repair or replacement of discontinued product will be at the discretion of Bernhardt Design. Natural color changes, variations or movements in lumber or veneer products, exposure to extreme temperature changes and direct sunlight may cause color changes and/or surface damage. These are circumstances beyond the control of Bernhardt Design and are not warranty issues. Certain chair styles with exposed wood require construction methods that accent color variations in light and natural stains. These variations are not considered product defects and are not warranty issues. Damages to stacking chairs caused by stacking/unstacking methods are not controllable by Bernhardt Design and are not considered warranty issues. This warranty is the customer s exclusive remedy for product defect and does not apply to damage caused by a carrier, dealer, installer, user modification, or attachments to a product. Bernhardt Design has the exclusive right to make the final determination of product misuse or abuse. This warranty excludes fabrics, leathers and any other textiles for wearing quality, color fastness, shrinkage, wrinkling, stretching, or dye lot match. Except as stated above, Bernhardt Design makes no express or implied warranties as to any product, and in particular, makes no warranty of merchantability or of fitness for any particular purpose. Bernhardt Design shall not be liable for any consequential or incidental damages or for commercial loss arising from any product defect. Care and Use Finished wood surfaces should be cleaned with a soft damp cloth, wiping in the direction of the grain. Dry with a soft cloth, wiping in the grain direction. Do not use waxes or furniture polish as these will cause an unsightly film build-up. Custom Design Bernhardt Design will alter some of its products to meet your specific needs. Contact your Bernhardt Design sales representative when a custom design is needed. Custom designs require minimum quantities, additional leadtime and upcharges. 4

5 seating terms and conditions A custom job number, available from your Bernhardt Design sales representative, must be submitted with purchase orders. Customer's Own Material (COM) Customer s Own Leather (COL) Approval Procedures Due to aesthetic reasons or application restraints, Bernhardt Design must preapprove certain COM/COL fabrics for application on Bernhardt Design products. These fabric types include, but are not limited to, thin fabrics without backing such as nylon, parachute cloth, woven grass cloth or transparent materials. Also, rug weight and thick mohair fabrics will need prior approval. Fabrics with more than 40% silk content will not be accepted. PREAPPROVAL PROCEDURE Please submit a 12 X 12 sample prior to the actual shipment of COM/COL to Bernhardt Design. Sample Shipping Address: Bernhardt Design 1839 Morganton Blvd. SW Lenoir, NC Attn: Customer Service Along with the COM/COL sample, the product number, quantity of products, and contact information must be specified for approval purposes. Bernhardt Design reserves the right to reject any covering which in our Fabric Yardage Vertical Repeat opinion is unsuitable for upholstery purposes. However, Bernhardt Design shall in no instance be held responsible for tailoring variances that result from the application of a particular textile or leather to a specific frame. COM Yardage Specifications All yardage requirements shown in the price list are based on 54" plain material. Fabrics with a vertical repeat that must be matched, or that are less than 54" wide, require more yardage. The chart below should be used for determining additional COM yardage requirements. Please add the indicated percentage to the yardage shown beside the style number in the price list. This guide will accurately cover most COMorders, but there will be instances due to unusual repeats or designs that additional yardages may be required. Bernhardt Design will not be held responsible for the purchase of any additional COM that may be required. When specifying a COM fabric that is more than 54 wide and includes a vertical and horizontal repeat, contact the Bernhardt Design office for additional yardage requirements. Bernhardt Design will not be held responsible for the purchase of any additional COM that may be required. All COM s will be cut and applied at the discretion of Bernhardt Fabric Plain 2"-10" 11"-20" 21"-25" 26"-30" Width Fabric Repeat Repeat Repeat Repeat 54" 0% 10% 15% 20% 25% 51-53" 15% 20% 25% 30% 35% 48-50" 30% 35% 40% 45% 50% 45-47" 45% 50% 55% 60% 65% 36-44" 60% 65% 70% 75% 80% Design unless special cutting instructions are included in writing with the purchase order. Fabric patterns must be identified as horizontal or vertical application. Bernhardt Design will not be held responsible for defective fabrics, as all COM s are accepted as first quality goods. When specifying more than one textile on seating items, such as contrasting fabrics, welts, and contrasting welts, additional yardage may be required due to fabric yield. COL Specifications Leather (COL)requirements are shown in square feet and calculated for hides that are 40 square feet or above. For hides below 40 square feet add 15% to the footage requirements. For calf hides below 30 square feet add 30% to the footage requirements. Bernhardt Design will not be held responsible for receipt of defective leathers, as all COL s are accepted as first quality goods. COM/COL Tagging All COM/COLmust be properly tagged on the receiving documents in order for Bernhardt Design to match your fabric with your order. Bernhardt Design will not be responsible for any delays caused by fabric not correctly marked. Dealer: Tagged for: Product No: P.O. No.: Ack. No.: COM/COL SHIPPING ADDRESS: Bernhardt Design Plant # 7T Door # Morganton Blvd. SW Lenoir, NC COM/COL Disclaimer Bernhardt Design is not responsible for any unclaimed COM/COL 30 days after shipment of Bernhardt Design acknowledgment. It is the responsibility of the dealer to request the return of excess COM/ COL on the initial purchase order. Flammability It is the responsibility of the dealer to advise Bernhardt Design of local fire code requirements for final shipping destinations at the time of order placement. Bernhardt Design certifies that, when upholstered with our textiles, articles of furniture meet or exceed the requirements of the BIFMA First Generation Voluntary Upholstered Furniture Flammability Standard for Business and Institutional Furniture, the National Fire Protection Association Standard NFPA 260A- 86 for cigarette ignition resistance of components of upholstered furniture, and the construction criteria of the Upholstered Furniture Action Council (UFAC). Substitutions of customer s own material for Bernhardt Textiles are accepted at customer s risk. Contact your Bernhardt Design sales representative for other flammability requirements and upcharges. Bernhardt Design will not be responsible for any changes in color or appearance of fabrics with special treatments. Bernhardt Design will not be held responsible for replacement of goods damaged during treatment process. Orders Shipping to California Seating products upholstered in Bernhardt Textiles and shipping to California comply with CAL TB COM/COL applied to Lilt or Vika must meet CAL TB requirements in order for Lilt or Vika to comply. Proof of COM/COL 5

6 seating terms and conditions compliance must be provided at the time of order placement for Lilt or Vika. All other COM/COL upholstered seating products comply with CAL TB Compliance for other locations is available upon request. California Technical Bulletin133 (CAL TB 133) Specific frame and fabric combinations must be submitted to Bernhardt Design for approval or disapproval of CAL TB 133 compliance prior to order placement. Include the frame number, fabric manufacturer and pattern name, fabric content, fabric weight, and reference any backing material or special fabric finish applied. Fire retardant thread, a fire retardant barrier and CMHR (Combustion Modified High Resilience) foam, or a combination thereof, are provided on most CAL TB 133 orders. Please contact your Bernhardt Design sales representative for applicable upcharges for each frame. Testing is available for $750 net, plus cost of COM/COL and requires 6-8 weeks. Bernhardt Design will not be responsible for any changes in color or appearance of fabrics with special treatments. Bernhardt Design will not be held responsible for replacement of goods damaged during treatment process. Guest Seating Bernhardt Design guest seating is constructed of kiln dried solid maple parts except as noted in the price list. These solid maple parts are double doweled, utilizing corner blocks and lag bolts on the seat frame. The seat consists of high resilience urethane foam over woven webbing. Stretchers, which enhance product durability in high use public areas, are available on selected Bernhardt Design exposed wood seating products. Contact your Bernhardt Design sales representative for information regarding applicable upcharges for the addition of stretchers to chairs that are intended to be used in areas such as restaurants, cafeterias, training centers, hotel/motels, and other applications where chairs would be subject to above normal movement and use. Lounge Seating Bernhardt Design lounge seating is constructed from kiln dried lumber using double and triple dowel methods. High resilience urethane foam is used in conjunction with polyester fiber filling. Exposed wood components consist of maple or parawood solids. Contrasting Fabric and Welt Upcharges Bernhardt Design must approve contrasting fabric and welt applications. If approved, the following upcharges apply: Chair: Loveseat: Sofa: $50.00 Net each $60.00 Net each $75.00 Net each Exceptions: Reference Code product skus for exceptions to contrasting fabric/welt upcharges. Executive and Management Office Seating Bernhardt Design offers executive and management swivel chairs with pneumatic gas lifts and tilt controls. Base styles include black or polished aluminum options. Special Finishes Special finishes, made to customer specifications and subject to factory approval, may be available at a 5% net upcharge with a $500 net minimum. Contact your Bernhardt Design sales representative when a special finish is desired. When ordering a special finish, additional lead times may be required. Special finishes cannot be cancelled after acknowledged by Bernhardt Design. Standard Finishes Finishes must be specified on all orders. The following finishes are available: Maple/Ash Oak Parawood/Zebrawood Walnut LV8* Exceptions. *Reference individual product skus for applicable finishes. Bernhardt Design seating finishes are compatible with our casegoods finishes. However, finishes may vary slightly due to the natural characteristics of the wood. No absolute match is implied or guaranteed. Light Finishes Bernhardt Design offers light finishes 836, 837, 840, 850, 870 and LV8 on certain veneers. Light finishes do not hide or mask the natural characteristics of the wood. It is very important that the dealer and customer understand that inherent natural characteristics of the wood will be apparent in the chair when using a light finish. Natural char- acteristics include the natural discolorations of the wood substance and color variations in glued up stock. These natural characteristics are not considered defects by Bernhardt Design, and therefore merchandise will not be replaced. Design and Patent Rights All of the products shown in Bernhardt Design catalogs and described in Bernhardt Design price lists are, and remain, the property of Bernhardt Design, with the sole right reserved to manufacture and to distribute. Some of the product designs shown are patented in the United States and will remain the property of Bernhardt Design. Any reproduction of the products constitutes an infringement of patented copyright laws and will be subject to prosecution. General Services Administration Product available on the Bernhardt Design GSA - Federal Supply Service Contract GS-28F-7040G is noted in the product descriptions. For information regarding GSA pricing, please contact your local Bernhardt Design sales representative or call Send all GSA payments to: Collections Center Drive Chicago IL Bernhardt Design is a registered trademark of Bernhardt Furniture Company of Lenoir, NC. 6

7 guaranteed freight program Preferred Carrier Guaranteed Freight Rates Freight charges will be applied to orders as a separate line item based on the zones listed. The freight amount is calculated on the total merchandise net COM price, excluding any extra discounts beyond standard net pricing. Additional freight fuel surcharges may apply. All orders are shipped by Bernhardt Design company trucks or preferred carriers specified by Bernhardt Design. Rates are based on deliveries made Monday through Friday, 8 a.m. until 5 p.m. Dealer warehouse information, including phone number and contact name, must be specified on the purchase order. Direct site deliveries may be requested with an additional freight cost. Freight rates are based on zones with a minimum for each zone. All zones are within the Continental United States. Mininum Freight Average Zone Charge Rate Service Days 1 $80 5% 2-4 Business Days 2 $80 6% 2-4 Business Days 3 $90 7% 3-5 Business Days 4 $90 8% 5-7 Business Days 5 $90 9% 6-9 Business Days 6 $110 10% 6-9 Business Days 7 $110 11% 7-10 Business Days 8 $120 12% 8-12 Business Days 9 $120 13% 8-12 Business Days 10 $120 15% Business Days Note: Average Service Days excludes ship day

8 barstools ace 1170G 29 " - 18Ω" 18 " 29 " lbs. 6.48'/1 750 mm mm 464 mm 750 mm kg.18 cu. List Price 441 Barstool. Charcoal Gray. Steel frame powdercoated to match polypropylene seat. Seat 13 '' x 13 ''. Approved for GSA. Contract GS-28F- 7040G. ace 1171G 25 " - 17 " 17 " 25 " lbs. 5.64'/1 641 mm mm 445 mm 641 mm kg.15 cu. List Price 415 Counter height stool. Charcoal Gray. Steel frame powdercoated to match polypropylene seat. Seat 13 '' x 13 ''. Approved for GSA. Contract GS-28F-7040G. ace 1170W 29 " - 18Ω" 18 " 29 " lbs. 6.48'/1 750 mm mm 464 mm 750 mm kg.18 cu. List Price 441 Barstool. White. Steel frame powdercoated to match polypropylene seat. Seat 13 '' x 13 ''. Approved for GSA. Contract GS-28F-7040G. ace 1171W 25 " - 17 " 17 " 25 " lbs. 5.64'/1 641 mm mm 445 mm 641 mm kg.15 cu List Price 415 Counter height stool. White. Steel frame powdercoated to match polypropylene seat. Seat 13 '' x 13 ''. Approved for GSA. Contract GS- 28F-7040G. ace 1170WC 29 " - 18Ω" 18 " 29 " lbs. 6.48'/1 750 mm mm 464 mm 750 mm kg.18 cu. List Price 441 Barstool. White polypropylene seat. Polished chrome frame. Seat 13 '' x 13 ''. Approved for GSA. Contract GS-28F-7040G. ace 1171WC 25 " - 17 " 17 " 25 " lbs. 5.64'/1 641 mm mm 445 mm 641 mm kg.15 cu List Price 415 Counter height stool. White polypropylene seat. Polished chrome frame. Seat 13 '' x 13 ''. Approved for GSA. Contract GS-28F-7040G. 8

9 barstools aro π" - 16Ω" 16Ω" 31π" lbs '/1 806 mm mm 416 mm 806 mm kg.29 cu. List Price 1257 Barstool. Polished stainless steel. Maple swivel seat. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Also available in counter height. Approved for GSA. Contract GS-28F-7040G. aro " - 15 " 15 " 24 " lbs. 7.56'/1 613 mm mm 403 mm 613 mm kg.21 cu. List Price 1128 Counter height stool. Polished stainless steel. Maple swivel seat. Also available in bar height. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Also available in bar height. Approved for GSA. Contract GS-28F-7040G. aro π" - 16Ω" 16Ω" 31π" lbs '/1 806 mm mm 416 mm 806 mm kg.29 cu. List Price 1290 Barstool. Polished stainless steel. Walnut swivel seat. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Also available in counter height. Approved for GSA. Contract GS-28F-7040G. aro " - 15 " 15 " 24 " lbs. 7.56'/1 613 mm mm 403 mm 613 mm kg.21 cu. List Price 1159 Counter height stool. Polished stainless steel. Walnut swivel seat. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Also available in bar height. Approved for GSA. Contract GS-28F-7040G. aro π" - 16Ω" 16Ω" 31π".75 yd. 10.0' 28 lbs '/1 806 mm mm 416 mm 806 mm.7 m.93 sqm 12.7 kg.29 cu Barstool. Polished stainless steel. Upholstered swivel seat. Certain thick or heavy pile fabrics or fabrics with very little stretch are not suitable for application on this product. *All COM/COL must be preapproved prior to application. Also available in counter height. Approved for GSA. Contract GS-28F-7040G. aro " - 15 " 15 " 24 ".75 yd. 10.0' 25 lbs. 7.56'/1 613 mm mm 403 mm 613 mm.7 m.93 sqm 11.3 kg.21 cu Counter height stool. Polished stainless steel. Upholstered swivel seat. Certain thick or heavy pile fabrics or fabrics with very little stretch are not suitable for application on this product. *All COM/COL must be preapproved prior to application. Also available in bar height. Approved for GSA. Contract GS-28F-7040G. 9

10 barstools caron " - 19" 22 " 41Ω" 2.0 yds. 24.0' 40 lbs '/1 759 mm mm 587 mm 1051 mm 1.8 m 7.3 sqm 18.1 kg.43 cu Barstool. Brushed stainless steel stretcher guard. Maple solids. Available in all finishes. When specifying light finish 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. forest π" - 15 " 15 " 29π".5 yd. 10.0' 16 lbs '/1 756 mm mm 394 mm 756 mm.5 m.93 sqm 7.3 kg.29 cu Barstool. Chrome plated steel frame. Upholstered ''h, 14''w non-swivel seat. Non-swivel. Certain thick or heavy pile fabrics or fabrics with very little stretch are not suitable for application on this product. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. forest 1528M 30 " - 15 " 15 " 30 " lbs '/1 775 mm mm 394 mm 775 mm kg.29 cu. List Price 734 Barstool. Chrome plated steel frame. Maple 1 ''h, 14''w swivel seat. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. forest 1528W 30 " - 15 " 15 " 30 " lbs '/1 775 mm mm 394 mm 775 mm kg.29 cu. List Price 762 Barstool. Chrome plated steel frame. Walnut 1 ''h, 14''w swivel seat. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. forest " - 15 " 15 " 30 ".5 yd. 10.0' 16 lbs '/1 775 mm mm 394 mm 775 mm.5 m.93 sqm 73 kg.29 cu Barstool. Chrome plated steel frame. Upholstered 1 ''h, 14''w swivel seat. Certain thick or heavy pile fabrics or fabrics with very little stretch are not suitable for application on this product. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 10

11 barstools laine 1545, 1545B 29π" - 18Ω" 16π" 29π" lbs '/1 756 mm mm 425 mm 756 mm kg.29 cu. List Price Polished Stainless Steel 1545B Brushed Stainless Steel GREENGUARD Certified Barstool. Walnut seat. Seat: 17''w x 13''d. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. st. germain " - 19 " 23 " 44" 2.4 yds. 27.2' 50 lbs '/1 762 mm mm 597 mm 1118 mm 2.2 m 2.5 sqm 22.7 kg.43 cu Barstool. Stainless steel stretcher guard. Parawood solids. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. For guest chair see St. Etienne. Approved for GSA. Contract GS-28F-7040G. studio 1453CS 30 " 38π" 22 " 21 " 43 " 1.0 yds. 18.7' 45 lbs '/1 775 mm 984 mm 572 mm 546 mm 1105 mm 0.9 m 1.7 sqm 20.4 kg.43 cu Barstool. Brushed nickel. Maple solids on back and arms. Available in all finishes. When specifying light finish 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Also available as guest chair. Approved for GSA. Contract GS-28F-7040G. vanish " - 16 " 17 " 31" lbs '/1 762 mm mm 438 mm 787 mm cu. List 734 Barstool. Chrome plated steel stretcher guard. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. Approved for GSA Contract GS-28F-7040G. zoe " - 19 " 21Ω" 40 " 2.5 yds. 30.0' 35 lbs '/1 762 mm mm 543 mm 1020 mm 2.3 m 2.8 sqm 15.9 kg.43 cu Barstool. Brushed stainless steel stretcher guard. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt along base. Certain stiff fabrics or fabrics with very little stretch are not suitable for application on this product. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 11

12 benches apel " - 22 " 22 " 17 " 1.6 yds. 30.0' 20.0 lbs. 7.0'/1 438 mm mm 565 mm 445 mm 1.5 m 2.8 sqm 9.07 kg.19 cu Ottoman. Fully upholstered. Saddle stitch. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. apel 5850L 17 " - 22 " 22 " 17 " 1.6 yds. 30.0' 20.0 lbs. 7.0'/1 438 mm mm 565 mm 445 mm 1.5 m 2.8 sqm 9.07 kg.19 cu Ottoman. Fully upholstered. Loop master stitch. Thread color must be specified. Reference Apel/Stitching on Bernhardtdesign.com for color options. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. apel 5850M 17 " - 22 " 22 " 17 " 1.6 yds. 30.0' 20.0 lbs. 7.0'/1 445 mm mm 565 mm 445 mm 1.5 m 2.8 sqm 9.07 kg.19 cu Mobile ottoman. Six small concealed casters. Fully upholstered. Saddle stitch. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. apel 5850ML 17 " - 22 " 22 " 17 " 1.6 yds. 30.0' 20.0 lbs. 7.0'/1 445 mm mm 565 mm 445 mm 1.5 m 2.8 sqm 9.07 kg.19 cu Mobile ottoman. Six small concealed casters. Fully upholstered. Loop master stitch. Thread color must be specified. Reference Apel/Stitching on Bernhardtdesign.com for color options. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. apel " - 41 " 41 " 16 " 3.3 yds. 65.0' 66 lbs '/1 419 mm mm 1048 mm 419 mm 3.0 m 6.0 sqm 29.9 kg.91 cu Ottoman. Fully upholstered. Saddle stitch. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. apel 5851L 16 " - 41 " 41 " 16 " 3.3 yds. 65.0' 66 lbs '/1 419 mm mm 1048 mm 419 mm 3.0 m 6.0 sqm 29.9 kg.91 cu Ottoman. Fully upholstered. Loop master stitch. Thread color must be specified. Reference Apel/Stitching on Bernhardtdesign.com for color options. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. 12

13 benches argon " - 44" 20π" 17 " 2.1 yds. 25.0' 85 lbs '/1 438 mm mm 527 mm 438 mm 1.9 m 2.3 sqm 38.6 kg.84 cu Solid walnut bench. 43'' tufted cushion. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon " - 60" 20π" 17 " 3.0 yds. 33.0' 115 lbs '/1 438 mm mm 527 mm 438 mm 2.7 m 3.1 sqm 52.2 kg.84 cu Solid walnut bench. 59'' tufted cushion. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Fabric must be Railroaded. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon " - 60" 20π" 17 " 3.5 yds. 40.0' 115 lbs '/1 438 mm mm 527 mm 438 mm 3.2 m 3.7 sqm 52.2 kg.84 cu Solid walnut bench. Two 29 '' tufted cushions. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon " - 60" 20π" 17 " 4.0 yds. 35.0' 115 lbs '/1 438 mm mm 527 mm 438 mm 3.7 m 3.3 sqm 52.2 kg.84 cu Solid walnut bench. 37 '' and 21 '' tufted cushions. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon 5823W 17 " - 60" 20π" 17 " 2.1 yds. 24.0' 120 lbs '/1 438 mm mm 527 mm 438 mm 1.9 m 2.2 sqm 54.4 kg.84 cu Solid walnut bench. 37 '' tufted cushion with 20π''w walnut shelf. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866 and 870 finishes. When specifying light finish 870 the natural characteristics of the wood will be visible. LV8 finish is not available on 5823W. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 13

14 benches argon " - 81" 20π" 17 " 3.3 yds. 50.0' 180 lbs '/1 438 mm mm 527 mm 438 mm 3.0 m 4.6 sqm 81.6 kg 1.07 cu Solid walnut bench. 80'' tufted cushion. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Fabric must be railroaded. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon " - 81" 20π" 17 " 4.3 yds. 50.0' 180 lbs '/1 438 mm mm 527 mm 438 mm 3.9 m 4.6 sqm 81.6 kg 1.07 cu Solid walnut bench. Two 40'' tufted cushions. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon " - 81" 20π" 17 " 5.3 yds. 60.0' 180 lbs '/1 438 mm mm 527 mm 438 mm 4.8 m 5.6 sqm 81.6 kg 1.07 cu Solid walnut bench. One 21 '' and two 29 '' tufted cushions. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon 5833W 17 " - 81" 20π" 17 " 3.5 yds. 40.0' 185 lbs '/1 438 mm mm 527 mm 438 mm 3.2 m 3.7 sqm 83.9 kg 1.07 cu Solid walnut bench. Two 29 '' tufted cushions with 20π'' walnut shelf. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866 and 870 finishes. When specifying light finish 870 the natural characteristics of the wood will be visible. LV8 finish is not available on 5833W. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. argon 5834W 17 " - 81" 20π" 17 " 3.0 yds ' 185 lbs '/1 438 mm mm 527 mm 438 mm 2.7 m 3.1 sqm 83.9 kg 1.07 cu Solid walnut bench. 59'' tufted cushion with 20π'' walnut shelf. Polished stainless steel legs. Available in 823, 839, 841, 860, 861, 866 and 870 finishes. When specifying light finish 870 the natural characteristics of the wood will be visible. LV8 finish is not available on 5834W. See terms and conditions. Fabric must be railroaded. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 14

15 benches balance " - 19" 19" 18 " 2.8 yds. 27.8' 20 lbs. 7.0'/1 470 mm mm 483 mm 470 mm 2.6 m 2.6 sqm 9 kg.19 cu Mobile Stool. Fully upholstered. Six casters. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for top seat panel yardage: 0.8 yds. leather: 6.8 sq. ft. B) One fabric or leather for body yardage: 2.0 yds. leather: 21.0 sq. ft. balance " - 20 " 20" 18" 2.3 yds. 20.0' 35 lbs. 7.0'/1 457 mm mm 508 mm 457 mm 2.1 m 1.9 sqm 15.9 kg.19 cu Bench. Fully upholstered. Polished chrome frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance " - 41 " 20" 18" 2.8 yds. 37.7' 55 lbs '/1 457 mm mm 508 mm 457 mm 2.6 m 3.5 sqm 24.9 kg.84 cu Bench. Fully upholstered. Polished chrome frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance " - 63" 20" 18" 3.6 yds. 54.4' 85 lbs '/1 457 mm mm 508 mm 457 mm 3.3 m 5.1 sqm 38.6 kg.84 cu Bench. Fully upholstered. Polished chrome frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. bannok " 24" 19" 2.3 yds. 37.7' 90 lbs '/1 483 mm mm 610 mm 483 mm 2.1 m 3.5 sqm 41.1 kg.84 cu Bench with six-panel upholstered seat. Parawood solids. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 15

16 benches colours 1-12, Colours: a modular seating product comprised of 12 unique modules which may be used interchangeably to create an unlimited number of of configurations. For complete information reference Colours in the lounge section of the price list. cp.1 15 " - 26π" 22" 15 " 2.2 yds. 27.0' 31 lbs '/1 391 mm mm 559 mm 403 mm 2.0 m 2.5 sqm 14.1 kg.32 cu. COM COL BERNHARDT TEXTILES FELT FELT Polished Stainess Steel 6503B - Brushed Stainess Steel Ottoman. Quilted seat. Base dimensions: w23 '' d18π'' h13 ''. A loop stitch cording traces the perimeter of the ottoman. Contrasting thread options are available. For thread color options reference CP.1/Stitching on Bernhardtdesign.com. All Bernhardt Textiles leathers are suitable for application on this product. Firm, non-flexible leathers not recommended. *All COM FELT/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. Available in leather, leather alternatives, suede or felt only. 16Ω" - 56 " 26 " 16Ω" 3.6 yds. 49.0' 60 lbs '/1 416 mm mm 673 mm 416 mm 3.3 m 4.6 sqm 27.3 kg.48 cu. COM COL BERNHARDT TEXTILES FELT FELT Polished Stainess Steel 6505B - Brushed Stainess Steel Two Seat Bench. Quilted seat. Base dimensions: w50 '' d18 '' h13 ''. A loop stitch cording traces the perimeter of the bench. Contrasting thread options are available. For thread color options reference CP.1/Stitching on Bernhardtdesign.com. All Bernhardt Textiles leathers are suitable for application on this product. Firm, non-flexible leathers not recommended. *All COM FELT/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. Available in leather, leather alternatives, suede or felt only. cp.2 15 " - 26 " 22" 15 " 2.2 yds. 27.0' 31 lbs '/1 391 mm mm 559 mm 391 mm 2.0 m 2.5 sqm 14.1 kg.32 cu Polished Stainess Steel 6504B - Brushed Stainess Steel Ottoman. Upholstered Seat. Base dimensions: w23 '' d18π'' h13 ''. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 16 " - 56 " 26 " 16 " 3.6 yds. 49.0' 60 lbs '/1 419 mm mm 673 mm 419 mm 3.3 m 4.6 sqm 27.3 kg.48 cu Polished Stainess Steel 6506B - Brushed Stainess Steel Two Seat Bench. Upholstered Seat. Base dimensions: w50 '' d18 '' h13 ''. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 16

17 benches cycle " - 23 " 23 " 18 " 1.5 yds. 18.0' 15 lbs. 7.0'/1 464 mm mm 600 mm 464 mm 1.4 m 1.7 sqm 6.8 kg.19 cu Stool. Polished stainless steel frame. 18 diameter upholstered seat. Approved for GSA. Contract GS-28F-7040G. cycle " - 41 " 41 " 18 " 3.0 yds. 50.0' 35 lbs '/1 464mm mm 1064 mm 464 mm 2.7 m 4.6 sqm 15.9 kg.91 cu Bench. Polished stainless steel frame. 36 diameter upholstered seat. Leather will have cross patterened seams beginning at base. Approved for GSA. Contract GS-28F-7040G. cycle " - 47 " 47 " 18 " 3.5 yds. 60.0' 40 lbs '/1 464 mm mm 1210 mm 464 mm 3.2 m 5.6 sqm 18.0 kg.91 cu Bench. Polished stainless steel frame. 42 diameter upholstered seat. Leather will have cross patterened seams beginning at base. Approved for GSA. Contract GS-28F-7040G. cycle " - 71 " 32Ω" 18 " 3.5 yds. 60.0' 45 lbs '/1 464 mm mm 822 mm 464 mm 3.2 m 5.6 sqm 20.4 kg 1.93 cu Oval Bench. Polished stainless steel frame. 66 wide, 26π deep upholstered seat. Leather will have cross patterened seams beginning at base. Approved for GSA. Contract GS-28F-7040G. 17

18 benches egalité " - 60 " 19 " 17 " 2.5 yds. 37' 86 lbs '/1 448 mm mm 495 mm 448 mm 2.3 m 3.4 sqm 39.0 kg.84 cu Bench. Upholstered seat. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by application. Approved for GSA. Contract GS-28F-7040G. fly " - 60" 20 " 16 " lbs '/1 413 mm mm 530 mm 413 mm kg.69 cu. List Price 1931 Bench. Polished stainless steel legs. Solid maple wood seat. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. fly " - 72" 20 " 16 " lbs '/1 413 mm mm 530 mm 413 mm kg.69 cu. List Price 2059 Bench. Polished stainless steel legs. Solid maple wood seat. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. fly " - 60" 20 " 16 " lbs '/1 413 mm mm 630 mm 413 mm kg.69 cu. List Price 2805 Bench. Polished stainless steel legs. Solid walnut seat. Available in 823, 839, , 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F- 7040G. fly " - 72" 20 " 16 " lbs '/1 413 mm mm 530 mm 413 mm kg.69 cu. List Price 2934 Bench. Polished stainless steel legs. Solid walnut seat. Available in 823, 839, , 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F- 7040G. 18

19 benches laurel " 23 " 18 " 3.0 yds. 44.0' 94 lbs '/1 470 mm mm 597 mm 470 mm 2.7 m 4.1 sqm kg.84 cu Bench with three panel upholstered seat. Parawood solids. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Pile fabrics are not suitable for application on this product. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. mirador 8040A 16 " - 30" 28π" 16 " 3.0 yds. 40.0' 55 lbs /1 419 mm mm 730 mm 419 mm 2.7 m 3.7 sqm 25.0 kg.64 cu Bench. Fully upholstered with a polished cast aluminum frame with levelers and non-marring glides.*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. mirador 8041A 16 " - 60" 28π" 16 " 5.5 yds. 75.0' 122 lbs /1 419 mm mm 730 mm 419 mm 5.0 m 7.0 sqm 55.5 kg 1.93 cu Bench. Fully upholstered with a polished cast aluminum frame with levelers and non-marring glides.*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. mirador 8042A 16 " - 90" 28π" 16 " 7.5 yds ' 181 lbs /1 419 mm mm 730 mm 419 mm 6.9 m 9.4 sqm 82.3 kg 2.87 cu Bench. Fully upholstered with a polished cast aluminum frame with levelers and non-marring glides.*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. pause Ω - 60" 20" 17Ω" 1.8 yds. 30.0' 60.0 lbs '/1 411 mm mm 508 mm 441 mm 1.6 m 2.8 sqm 27.2 kg.83 cu Bench. Solid maple. Upholstered seat. Fabric Railroaded. Standard with accent welt. Leather and leather alternatives will have center seam. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. Approved for GSA Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat cushion yardage: 1.8 yds. leather: 25.0 sq. ft. B) One fabric or leather for contrasting welt yardage:.5 yds. leather: 15.0 sq. ft. 19

20 benches workshop 16 " 25 " 74π" 30 " 29 " 8.7 yds ' 154 lbs '/1 419 mm 641 mm 1899 mm 768 mm 743 mm 7.9 m 11.3 sqm 70.3 kg 2.28 cu A 6110A Chaise, Right Arm Facing 6111A Chaise, Left Arm Facing Chaise. Brushed antique copper base. Upholstered seat. Fabric Railroaded. Two 21''w x 12''h back cushions with center button; one 20''w x 8 ''h arm cushion with center button; one 6''d x 19 ''l bolster. 6111A When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat, back and arm yardage: 4.6 yds. leather: 77.6 sq. ft. B) One fabric or leather for back pillows yardage: 1.6 yds. leather: 27.0 sq. ft. C) One fabric or leather for arm pillow yardage:.75 yds. leather: 12.2 sq. ft. D) One fabric or leather for bolster yardage:.75 yds. leather: 12.7 sq. ft. workshop 16 " 25 " 74π" 30 " 29 " 8.7 yds ' 155 lbs '/1 419 mm 641 mm 1899 mm 768 mm 743 mm 7.9 m 11.3 sqm 70.3 kg 2.28 cu B 6110B Chaise, Right Arm Facing 6111B Chaise, Left Arm Facing Chaise. Brushed stainless steel base. Upholstered seat. Fabric Railroaded. Two 21''w x 12''h back cushions with center button; one 20''w x 8 ''h arm cushion with center button; one 6''d x 19 ''l bolster. 6111B When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat, back and arm yardage: 4.6 yds. leather: 77.6 sq. ft. B) One fabric or leather for back pillows yardage: 1.6 yds. leather: 27.0 sq. ft. C) One fabric or leather for arm pillow yardage:.75 yds. leather: 12.2 sq. ft. D) One fabric or leather for bolster yardage:.75 yds. leather: 12.7 sq. ft. 20

21 swivel alta " 24-27" 27" 27" 33π-36π" 2 yds. 30.0' 57 lbs '/ mm mm 686 mm 686 mm mm 1.8 m 2.79 sqm 25.9 kg.82 cu Mid Back 580F Mid Back Fixed Height*. *Fixed Height Dimensions: Seat 19π"h, 502mm Arm 26 "h, 667mm Back 36"h, 914mm Seat: Fully upholstered molded foam and plywood shell. *All COM/COL must be preapproved by Bernhardt Design prior to application. Arms: Cantilevered polished aluminum arms with thin upholstered arm pads. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 27" 5-star polished aluminum base. Black dual wheel casters for use on carpet and hard surfaces. alta " 24-27" 27" 27" 33π-36π" 3.0 yds. 43.5' 57 lbs '/ mm mm 686 mm 686 mm mm 2.8 m 4.0 sqm 25.9 kg.82 cu Mid Back - Upholstered Back Pad 582F Mid Back Fixed Height* - Upholstered Back Pad. *Fixed Height Dimensions: Seat 19π"h, 502mm Arm 26 "h, 667mm Back 36"h, 914mm Seat: Fully upholstered molded foam and plywood shell. Upholstered back pad. *All COM/COL must be preapproved by Bernhardt Design prior to application. Arms: Cantilevered polished aluminum arms with thin arm pads upholstered in the fabric or leather of the body of the chair. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 27" 5-star polished aluminum base. Black dual wheel casters for use on carpet and hard surfaces. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat, back, and arm caps yardage: 2.0 yds. leather: 30.0 sq. ft. B) One fabric or leather for back pad and welt yardage: 1.0 yds. leather: 13.5 sq. ft. alta " 24-27" 27" 27" 33π-36π" - ** 57 lbs '/ mm mm 686 mm 686 mm mm - ** 25.9 kg.82 cu. COL Mid Back - Perforated Leather Back Pad 584F Mid Back Fixed Height* - Perforated Leather Back Pad. *Fixed Height Dimensions: Seat 19π"h, 502mm Arm 26 "h, 667mm Back 36"h, 914mm Available only in Bernhardt Textiles Rogue or Essential leather. Consult Bernhardttextiles.com for colorways. Perforated leather in the Pique pattern for the back pad may be specified in Rogue or Essential by adding the suffix P to the end of the item number. The Pique pattern is subject to the minimum purchase requirements per colorway in addition to an upcharge of $1.00 per sq. ft. Arms: Cantilevered polished aluminum arms with thin arm pads upholstered in the leather used on the body of the chair. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 27" 5-star polished aluminum base. Black dual wheel casters for use on carpet and hard surfaces. **Leather Requirements: A) Rogue or Essential leather for seat, back, arm caps and back pad welt leather: 30.0 sq. ft. B) Pique pattern in Rogue or Essential leather for back pad perforated leather: 13.5 sq. ft. 21

22 swivel alta " 24-27" 27" 27" 36Ω-39Ω" 2.5 yds. 32.0' 57 lbs '/ mm mm 686 mm 686 mm mm 2.3 m 2.97 sqm 25.9 kg.82 cu High Back 581F High Back Fixed Height*. *Fixed Height Dimensions: Seat 19π"h, 502mm Arm 26 "h, 667mm Back 38 "h, 987mm Seat: Fully upholstered molded foam and plywood shell. *All COM/COL must be preapproved by Bernhardt Design prior to application. Arms: Cantilevered polished aluminum arms with thin upholstered arm pads. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 27" 5-star polished aluminum base. Black dual wheel casters for use on carpet and hard surfaces. alta " 24-27" 27" 27" 36Ω-39Ω" 3.5 yds. 45.5' 57 lbs '/ mm mm 686 mm 686 mm mm 3.2 m 4.2 sqm 25.9 kg.82 cu High Back - Upholstered Back Pad 583F High Back Fixed Height* - Upholstered Back Pad *Fixed Height Dimensions: Seat 19π"h, 502mm Arm 26 "h, 667mm Back 38 "h, 987mm. Seat: Fully upholstered molded foam and plywood shell. Upholstered back pad. *All COM/COL must be preapproved by Bernhardt Design prior to application. Arms: Cantilevered polished aluminum arms with thin arm pads upholstered in the fabric or leather of the body of the chair. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 27" 5-star polished aluminum base. Black dual wheel casters for use on carpet and hard surfaces. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat, back, and arm caps yardage: 2.5 yds. leather: 32.0 sq. ft. B) One fabric or leather for back pad and welt yardage: 1.0 yds. leather: 13.5 sq. ft. alta " 24-27" 27" 27" 36Ω-39Ω" - ** 57 lbs '/ mm mm 686 mm 686 mm mm - ** 25.9 kg.82 cu. COL High Back - Perforated Leather Back Pad 585F High Back Fixed Height* - Perforated Leather Back Pad *Fixed Height Dimensions: Seat 19π"h, 502mm Arm 26 "h, 667mm Back 38 "h, 987mm. Available only in Bernhardt Textiles Rogue or Essential leather. Consult Bernhardttextiles.com for colorways. Perforated leather in the Pique pattern for the back pad may be specified in Rogue or Essential by adding the suffix P to the end of the item number. The Pique pattern is subject to the minimum purchase requirements per colorway in addition to an upcharge of $1.00 per sq. ft. Arms: Cantilevered polished aluminum arms with thin arm pads upholstered in the leather used on the body of the chair. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 27" 5-star polished aluminum base. Black dual wheel casters for use on carpet and hard surfaces. **Leather Requirements: A) Rogue or Essential leather for seat, back, arm caps and back pad welt leather: 32.0 sq. ft. B) Pique pattern in Rogue or Essential leather for back pad perforated leather: 13.5 sq. ft. 22

23 swivel cardan 17π-20π" " 26" 26 " 34-37" 3.5 yds. 55.0' 50 lbs '/ mm mm 660 mm 673 mm mm 3.2 m 5.1 sqm 22.6 kg.82 cu Polished Cast Aluminum Base Fully upholstered swivel chair. Polished aluminum base. Gas pneumatic lift. Adjustable height. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and gas pneumatic lift mounted on 27 5-star cast aluminum base. Black dual wheel casters for use on carpet and hard surfaces. Seat and Back: Seat Width: 19 " 495mm; Seat Depth: 18 " 464mm. Upholstered molded natural fiber shell with polyurethane foam. Certain two-way patterns, horizontal designs, thick or heavy piled fabrics or fabrics with stretch are not suitable for application. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat yardage: 1.0 yds leather: 15.0 sq. ft. B) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 2.5 yds leather: 40.0 sq. ft. 23

24 swivel Seat Height Arm Height W D H Fabric Leather Weight Cubes duet " 24-27" 25" 23π" 32-35" 2.5 yds. 35.0' 50 lbs '/ mm mm 635 mm 603 mm mm 2.3 m 3.3 sqm 22.6 kg.63 cu Polished Cast Aluminum Base Black Plastic Base Upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift mounted on a 25 5-star cast aluminum or black plastic base. Black dual wheel casters for use on carpet and hard surfaces. Seat and Back: Seat Width: 19 " 498mm; Seat Depth: 17Ω" 441mm. Upholstered molded polyurethane foam mounted to bent plywood shell. Arms: Round polished tubular chrome arms. duet " 24-27" 25" 23π" 32-35" 2.5 yds. 35.0' 50 lbs '/ mm mm 635 mm 603 mm mm 2.3 m 3.3 sqm 22.6 kg.63 cu Polished Cast Aluminum Base Black Plastic Base Horizontal Quilting. Horizontal stripes, two-way patterns are not recommended for application on this product. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift mounted on a 25 5-star cast aluminum or black plastic base. Black dual wheel casters for use on carpet and hard surfaces.. Seat and Back: Seat Width: 19 " 498mm; Seat Depth: 17Ω" 441mm. Upholstered molded polyurethane foam mounted to bent plywood shell. Arms: Round polished tubular chrome arms. 24

25 swivel Seat Height Arm Height W D H Fabric Leather Weight Cubes duet " 24-27" 25" 24" 32-35" 2.5 yds. 35.0' 50 lbs '/ mm mm 635 mm 610 mm mm 2.3 m 3.3 sqm 22.6 kg.63 cu Polished Cast Aluminum Base Black Plastic Base Upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift mounted on a 25 5-star cast aluminum or black plastic base. Black dual wheel casters for use on carpet and hard surfaces. Seat and Back: Seat Width: 19 " 498mm; Seat Depth: 17Ω" 441mm. Upholstered molded polyurethane foam mounted to bent plywood shell. Arms: Flat polished stainless steel arms. duet " 24-27" 25" 24" 32-35" 2.5 yds. 35.0' 50 lbs '/ mm mm 635 mm 610 mm mm 2.3 m 3.3 sqm 22.6 kg.63 cu Polished Cast Aluminum Base Black Plastic Base Horizontal Quilting. Horizontal stripes, two-way patterns are not recommended for application on this product. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift mounted on a 25 5-star cast aluminum or black plastic base. Black dual wheel casters for use on carpet and hard surfaces. Seat and Back: Seat Width: 19 " 498mm; Seat Depth: 17Ω" 441mm. Upholstered molded polyurethane foam mounted to bent plywood shell. Arms: Flat polished stainless steel arms. 25

26 swivel pilot 17-20" - 29 " 26" " 2.7 yds. 45.0' 65 lbs '/1 508 mm mm 660 mm 1003 mm 2.5 m 4.2 sqm 29.5 kg.82 cu Mid Back Armless Fully upholstered swivel chair. Polished aluminum trim. Gas pneumatic lift. Adjustable height. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and gas pneumatic lift mounted on 27 5-star cast aluminum base. Black dual wheel casters for use on carpet and hard surfaces. Seat and Back: Upholstered polyurethane foam with polished aluminum trim. Certain two-way patterns or striped fabrics are not suitable for application on this product. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. pilot 17-20" 24π-27 " 29 " 26" " 2.7 yds. 45.0' 70 lbs '/1 508 mm 699 mm 749 mm 660 mm 1003 mm 2.5 m 4.2 sqm 31.8 kg.82 cu Mid Back - Upholstered Arm Pads Fully upholstered swivel chair. Polished aluminum trim. Gas pneumatic lift. Adjustable height. Fixed height also available. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and gas pneumatic lift mounted on 27 5-star cast aluminum base. Black dual wheel casters for use on carpet and hard surfaces. Seat and Back: Upholstered polyurethane foam with polished aluminum trim. Certain patterned or striped fabrics are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. pilot 17-20" 24π-27 " 29 " 26" 40-43" 3.3 yds. 55.0' 70 lbs '/1 508 mm 699 mm 749 mm 660 mm 1092 mm 3.0 m 5.1 sqm 31.8 kg.82 cu High Back - Upholstered Arm Pads Fully upholstered swivel chair. Polished aluminum trim. Gas pneumatic lift. Adjustable height. Fixed height also available. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and gas pneumatic lift mounted on 27 5-star cast aluminum base. Black dual wheel casters for use on carpet and hard surfaces. Seat and Back: Upholstered polyurethane foam with polished aluminum trim. Certain patterned or striped fabrics are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. 26

27 swivel rice " 24-27" 25" 24π" 37-40" 2.75 yds. 45.0' 57 lbs '/ mm mm 635 mm 629 mm mm 2.5 m 4.2 sqm 25.9 kg.82 cu Mid Back - Upholstered Arm Pads - Polished Aluminum Base Mid Back - Black Neoprene Arm Pads - Polished Aluminum Base Mid Back - Upholstered Arm Pads - Black Base Mid Back - Black Neoprene Arm Pads - Black Base Mid Back. Seat Width: 20 " 521mm; Seat Depth: 18π" 476mm. Fully upholstered molded polyurethane foam mounted to mid back molded plywood shell. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 26 5-star base with black dual wheel casters. Arms: Polished aluminum loop arms with inset upholstered or molded black neoprene arm pads. rice " 24-27" 25" 24π" 40-43" 3.0 yds. 52.7' 60 lbs '/ mm mm 635 mm 629 mm mm 2.7 m 4.9 sqm 27.2 kg.82 cu High Back - Upholstered Arm Pads - Polished Aluminum Base High Back - Black Neoprene Arm Pads - Polished Aluminum Base High Back - Upholstered Arm Pads - Black Base High Back - Black Neoprene Arm Pads - Black Base High Back. Seat Width: 20 " 521mm; Seat Depth: 18π" 476mm. Fully upholstered molded polyurethane foam mounted to mid back molded plywood shell. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and standard gas pneumatic lift cylinder, 26 5-star base with black dual wheel casters. Arms: Polished aluminum loop arms with inset upholstered or molded black neoprene arm pads. 27

28 swivel sentry 18π-21 " 25π-28 " 24 " 27 " 36-39" 3.1 yds. 52.3' 100 lbs '/1 546 mm 724 mm 625 mm 699 mm 991 mm 2.8 m 4.2 sqm 45.3 kg.82 cu Black Cast Aluminum Base Polished Cast Aluminum Base Fully upholstered swivel chair. Gas pneumatic lift. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Base: Swivel/tilt mechanism with 2 degrees forward pitch and gas pneumatic lift on 26 5-star cast aluminum base. Black dual wheel casters for use on carpet and hard surfaces. Seat, Back and Arms: Upholstered polyurethane foam on mixed hardwood frame. 28

29 guest affiliate " - 19 " 24 " 35Ω" 2.0 yds. 27.0' 27 lbs '/2 460 mm mm 622 mm 899 mm 1.8 m 2.5 sqm 12.3 kg.81 cu Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. allée " - 21 " 23 " 29 " lbs '/2 438 mm mm 587 mm 743 mm kg.81 cu. List Price 843 Maple. Available in all finishes. When specifying light finishes 836, 837, 840, 850, 865 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. anne " 27π" 25 " 25" 29 " ' 25 lbs '/1 419 mm 705 mm 651 mm 635 mm 749 mm sqm 11.4 kg.63 cu. COL 2987 Walnut. Available in natural oiled LV8 finish only. Flange stitch seat. Not recommended for high use areas. Available in leather or suede only aria " 25 " 22 " 24 " 34" 2.0 yds. 37.4' 48 lbs '/1 470 mm 648 mm 572 mm 622 mm 864 mm 1.8 m 3.5 sqm 21.7 kg.63 cu Maple solids. " thick steel frame with brushed nickel finish. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Patent Serial No. D385,425. Approved for GSA. Contract GS-28F-7040G. 29

30 guest audio 1121B 17 " - 21 " 21Ω" 30 " lbs '/4 stacking chair 454 mm mm 543 mm 775 mm kg.59 cu. List Price 391 Polished chrome stacking chair. Brown plastic seat. Stacks 5 high. Audio will stack 12 high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. audio 1121O 17 " - 21 " 21Ω" 30 " lbs '/4 stacking chair 454 mm mm 543 mm 775 mm kg.59 cu. List Price 391 Polished chrome stacking chair. Orange plastic seat. Stacks 5 high. Audio will stack 12 high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. audio 1121R 17 " - 21 " 21Ω" 30 " lbs '/4 stacking chair 454 mm mm 543 mm 775 mm kg.59 cu. List Price 391 Polished chrome stacking chair. Red plastic seat. Stacks 5 high. Audio will stack 12 high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. audio 1121W 17 " - 21 " 21Ω" 30 " lbs '/4 stacking chair 454 mm mm 543 mm 775 mm kg.59 cu. List Price 391 Polished chrome stacking chair. White plastic seat. Stacks 5 high. Audio will stack 12 high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. 30

31 guest avant 1995, 1995P 17 " 24π" 21π" 23 " 31 " 1.75 yds. 32.5' 33 lbs '/1 445 mm 629 mm 552 mm 604 mm 800 mm 1.6 m 3.0 sqm 15.0 kg.63 cu Brushed Nickel 1995P Polished Stainless Steel Arms. Upholstered seat and back. Flange detail on the inside back of the chair. Standard vertical application of fabric with stripes. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. avant " - 19 " 25Ω" 31 " 1.75 yds. 32.5' 34 lbs '/2 445 mm mm 644 mm 800 mm 1.6 m 3.0 sqm 15.4 kg.81 cu Brushed nickel finish. Armless. Front to back stretcher. Upholstered seat and back. Flange detail on the inside back of the chair. Standard vertical application of fabric with stripes.*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. carson " 25 " 23" 25 " 33" 2.1 yds. 25.2' 28 lbs '/1 470 mm 648 mm 584 mm 648 mm 838 mm 1.9 m 2.3 sqm 12.7 kg.63 cu Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F-7040G. celon " 24π" 23" 23π" 31 " 2.75 yds. 36.0' 50 lbs '/1 460 mm 629 mm 584 mm 603 mm 800 mm 2.5 m 3.3 sqm 22.7 kg.63 cu Brushed stainless steel. Upholstered seat and back. Solids and leather will be seamed on the seat and inside back. Certain mohair, thick or heavy piled fabrics are not suitable for this product. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. celon " 24π" 23" 23π" 31 " 2.75 yds. 36.0' 50 lbs '/1 460 mm 629 mm 584 mm 603 mm 800 mm 2.5 m 3.3 sqm 22.7 kg.63 cu Polished stainless steel. Upholstered seat and back. Solids and leather will be seamed on the seat and inside back. Certain mohair, thick or heavy piled fabrics are not suitable for this product. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 31

32 guest claris " 24 " 23π" 24 " 32π" 4.4 yds. 60.0' 44 lbs '/1 489 mm 622 mm 603 mm 632 mm 832 mm 4.0 m 5.6 sqm 20.0 kg.63 cu Maple. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Welt standard along bottom edge of seat. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat and inside back yardage: 1.8 yds. leather: 24.0 sq. ft. B) One fabric or leather for outside back and sides, inside arms, front panel, welt yardage: 2.5 yds. leather: sq. ft. clark " 24 " 22" 23 " 32" 1.7 yds. 20.9' 26 lbs '/2 483 mm 622 mm 559 mm 597 mm 813 mm 1.6 m 1.9 sqm 11.8 kg.98 cu Parawood solids. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt on the inside back only. Approved for GSA. Contract GS-28F-7040G. corvo π" 27 " 22π" 21" 29" 1.0 yds. 12.5' 24.8 lbs '/1 476 mm 699 mm 578 mm 533 mm 737 mm 0.9 m 1.2 sqm 11.2 kg.63 cu Maple. Upholstered seat. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. corvo π" 27 " 22π" 21" 29" 1.0 yds. 12.5' 24.8 lbs '/1 476 mm 699 mm 578 mm 533 mm 737 mm 0.9 m 1.2 sqm 11.2 kg.63 cu Walnut. Upholstered seat. Available in 823, 839, , 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. 32

33 guest delaney " 25π" 22 " 23 " 30 " 1.7 yds. 25.2' 28 lbs '/2 470 mm 654 mm 572 mm 597 mm 775 mm 1.6 m 2.3 sqm 12.7 kg.98 cu ` Maple solids. Upholstered seat and back. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F-7040G. dillon " 23π" 22" 24" 32" 1.5 yds. 13.4' 26 lbs '/2 457 mm 603 mm 559 mm 610 mm 813 mm 1.4 m 1.2 sqm 11.7 kg.98 cu Parawood solids. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. dollar " 25 " 22 " 23 " 33" 2.0 yds. 37.4' 26 lbs '/2 483 mm 648 mm 572 mm 597 mm 838 mm 1.8 m 3.5 sqm 11.7 kg.98 cu Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F-7040G. edit " - 18" 23 " 31 " lbs '/2 470 mm mm 597 mm 800 mm kg.81 cu. List Price 856 Walnut solid base. Walnut veneered seat and back. Single finish. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. 33

34 guest edit 1150F 18 " - 18" 23 " 31 " lbs '/2 470 mm mm 597 mm 800 mm kg.81 cu. List Price 963 Walnut solid base. Walnut veneered seat and back. Contrasting finishes. Available in 823, 839, , 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. When using a combination of finishes, designate the finishes as follows. A) Base finish B) Seat and back finish Please specify the finishes by designating the appropriate letter on the purchase order. edit " - 18" 23 " 31 " lbs '/2 470 mm mm 597 mm 800 mm kg.81 cu. List Price 801 Maple solid base. Maple veneered seat and back. Single finish. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. edit 1151F 18 " - 18" 23 " 31 " lbs /2 470 mm mm 597 mm 800 mm kg.81 cu. List Price 907 Maple solid base. Maple veneered seat and back. Contrasting finishes. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. When using a combination of finishes, designate the finishes as follows: A) Base finish B) Seat and back finish Please specify the finishes by designating the appropriate letter on the purchase order. edit " - 18 " 23 " 32" 2.0 yds. 21.6' 28 lbs '/2 483 mm mm 597 mm 813 mm 1.8 m 2.0 sqm 12.7 kg.81 cu Walnut solid base. Upholstered seat. Available in 823, 839, , 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. Pile fabrics and certain patterned or striped fabrics are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 34

35 guest edit " - 18 " 23 " 32" 2.0 yds. 21.6' 28 lbs '/2 483 mm mm 597 mm 813 mm 1.8 m 2.0 sqm 12.7 kg.81 cu Maple solid base. Upholstered seat. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Pile fabrics and certain patterned or striped fabrics are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. forum " 23 " 23" 24 " 34 " 3.3 yds. 45.0' 42 lbs '/1 460 mm 600 mm 584 mm 622 mm 870 mm 3.0 m 4.2 sqm 19.0 kg.63 cu Maple solids. Upholstered seat and lower back. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Welt standard along bottom edge of seat. Approved for GSA. Contract GS-28F-7040G. go 1011SG 18" 25 23" 27" 30 " lbs '/1 457 mm 635 mm 584 mm 686 mm 775 mm kg.48 cu. List Price 1063 Silver powdercoated magnesium. Gray polypropylene seat. US Design Patent No. D446,960. Approved for GSA. Contract GS-28F-7040G. go 1011SW 18" 25 23" 27" 30 " lbs '/1 457 mm 635 mm 584 mm 686 mm 775 mm kg.48 cu. List Price 1603 Silver powdercoated magnesium. White polypropylene seat. US Design Patent No. D446,960. Approved for GSA. Contract GS-28F-7040G. helium " 25" 22 " 25π" 32" 1.5 yds. 27.0' 25.5 lbs '/2 464 mm 635 mm 565 mm 654 mm 813 mm 1.4 m 2.5 sqm 11.6 kg.98 cu Maple. Upholstered seat and back. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G 35

36 guest hyphen π" - 20 " 24 " 31π" 1.6 yd. 30.0' 20 lbs '/1 476 mm mm 625 mm 806 mm 1.5 m 2.8 sqm 9.1 kg.59 cu Polished chrome. Upholstered seat and back. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G levy 1130T 17" - 21" 22" 29π" lbs '/4 stacking chair 432 mm mm 559 mm 755 mm kg.59 cu List Price 394 Polished chrome stacking chair. Taupe plastic seat and back. Stacks eight high. Levy 1130T will stack fifteen high when used with the stacking cart levy 1130W 17" - 21" 22" 29π" lbs '/4 stacking chair 432 mm mm 559 mm 755 mm kg.59 cu List Price 394 Polished chrome stacking chair. White plastic seat and back. Stacks eight high. Levy 1130W will stack fifteen high when used with the stacking cart levy 1131W 17" - 21" 22" 29π" lbs '/4 stacking chair 432 mm mm 559 mm 755 mm kg.59 cu List Price 394 White powdercoated stacking chair. White plastic seat and back. Stacks eight high. Levy 1131W will stack fifteen high when used with the stacking cart lido wood 1465C 18" 26" 22 " 21 " 31 " lbs '/4 stacking chair 457 mm 660 mm 572 mm 546 mm 800 mm kg.59 cu. List Price 774 Brushed nickel stacking chair. Exposed maple seat and back. Stacks five high. Lido 1465 will stack eight high when used with stacking cart Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. 36

37 guest lido wood 1466C 18" 26" 22 " 21 " 31 " 1.2 yds. 8.4' 16 lbs '/3 stacking chair 457 mm 660 mm 572 mm 546 mm 800 mm 1.1 m.78 sqm 7.26 kg.59 cu Brushed nickel stacking chair. Exposed maple back, upholstered seat. Stacks five high. Lido 1466 will stack six high when used with the stacking cart Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Pile fabrics are not recommended for stackable applications. Approved for GSA. Contract GS-28F-7040G. lido wood 1467C 18" 26" 22 " 21 " 31 " 2.1 yds 20.9' 16 lbs '/3 stacking chair 457 mm 660 mm 572 mm 546 mm 800 mm 1.9 m 2.2 sqm 7.26 kg.59 cu Brushed nickel stacking chair. Upholstered seat and back. Stacks five high. Lido 1467 will stack six high when used with stacking cart Pile fabrics are not recommended for stackable applications. Approved for GSA. Contract GS-28F-7040G. lido 1468B 17 " 26" 22 " 22 " 30 " lbs '/4 stacking chair 445 mm 660 mm 572 mm 572 mm 775 mm kg.59 cu. List Price 471 Brushed nickel stacking chair. Black polypropylene seat. Stacks five high. Lido 1468B will stack eight high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. lido 1468G 17 " 26" 22 " 22 " 30 " lbs '/4 stacking chair 445 mm 660 mm 572 mm 572 mm 775 mm kg.59 cu. List Price 471 Brushed nickel stacking chair. Gray polypropylene seat. Stacks five high. Lido 1468G will stack eight high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. lido 1468R 17 " 26" 22 " 22 " 30 " lbs '/4 stacking chair 445 mm 660 mm 572 mm 572 mm 775 mm kg.59 cu. List Price 471 Brushed nickel stacking chair. Red polypropylene seat. Stacks five high. Lido 1468R will stack eight high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. 37

38 guest morganton " 25" 22Ω" 23 " 33 " 2.0 yds. 30.6' 27 lbs '/2 508 mm 635 mm 568 mm 597 mm 851 mm 1.8 m 2.8 sqm 12.2 kg.98 cu Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F orbit wood " - 21 " 21 " 31" lbs '/4 stacking chair 445 mm mm 546 mm 787 mm kg.59 cu. List Price 1078 Chrome stacking chair. Exposed ash seat. Gray stacking bumper. Stacks six high. Orbit will stack ten high when used with stacking cart Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. orbit wood " - 21 " 21 " 31" lbs '/4 stacking chair 445 mm mm 546 mm 787 mm kg.59 cu. List Price 1191 Chrome stacking chair. Exposed zebrawood seat. Gray stacking bumper. Stacks six high. Orbit will stack ten high when used with stacking cart Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. orbit 1103G 17 " - 21 " 21 " 31" lbs '/4 stacking chair 445 mm mm 546 mm 787 mm kg.59 cu. List Price 506 Chrome stacking chair. Dark Gray plastic seat. Gray stacking bumper. Stacks six high. Orbit will stack ten high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. 38

39 guest orbit 1103R 17 " - 21 " 21 " 31" lbs '/4 stacking chair 445 mm mm 546 mm 787 mm kg.59 cu. List Price 506 Chrome stacking chair. Red plastic seat. Gray stacking bumper. Stacks six high. Orbit will stack ten high when used with stacking cart Approved for GSA. Contract GS-28F orbit 1103W 17 " - 21 " 21 " 31" lbs '/4 stacking chair 445 mm mm 546 mm 787 mm kg.59 cu. List Price 506 Chrome stacking chair. White plastic seat. Gray stacking bumper. Stacks six high. Orbit will stack ten high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. sedona " 26" 24 " 26 34" 3.4 yds. 52.8' 43 lbs '/1 508 mm 660 mm 622 mm 673 mm 864 mm 3.1 m 4.9 sqm 20.4 kg.63 cu Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. The following Bernhardt Textiles are not suitable for application on this product: *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Standard with welt. Approved for GSA. Contract GS-28F-7040G. sempre " 23 " 21π" 22 " 30π" 1.7 yds lbs '/2 448 mm 591 mm 552 mm 575 mm 781 mm 1.6 m 1.9 sqm 12.2 kg.98 cu Maple. Upholstered seat and back. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F-7040G. session " 24 " 21 " 22 " 32 " 2.0 yds. 27.0' 28 lbs '/2 464 mm 622 mm 556 mm 562 mm 819mm 1.8 m 2.5 sqm 12.7 kg.98 cu Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. 39

40 guest sonar " - 21" 21 " 31 " lbs '/4 stacking chair 457 mm mm 546 mm 800 mm kg.59 cu. List Price 649 Polished chrome stacking chair. Exposed maple back and seat. Stacks 6 high. Sonar will stack 10 high when used with stacking cart Available in all finishes. When specifying light finishes 836, 837, 840, 850, 866 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. sonar 1126U 18" - 21" 21 " 31 " 1.2 yds. 13.5' 16 lbs '/3 stacking chair 457 mm mm 546 mm 800 mm 1.1 m 1.25 sqm 7.3 kg.59 cu Polished chrome stacking chair. Exposed maple back with upholstered seat. Stacks 6 high. Sonar will stack 10 high when used with stacking cart Available in all finishes. When specifying light finishes 836, 837, 840, 850, 866 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. sonar " - 21" 21 " 31 " lbs '/4 stacking chair 457 mm mm 546 mm 800 mm kg.59 cu List Price 734 Polished chrome stacking chair. Exposed zebrano tech seat and back. Stacks 6 high. Sonar will stack 10 high when used with stacking cart Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finishes 836 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. sonar 1127U 18" - 21" 21 " 31 " 1.2 yds. 13.5' 16 lbs '/3 stacking chair 457 mm mm 546 mm 800 mm 1.1 m 1.25 sqm 7.3 kg.59 cu Polished chrome stacking chair. Exposed zebrano tech back with upholstered seat. Stacks 6 high. Sonar will stack 10 high when used with stacking cart Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finishes 836 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F sonar " - 21" 21 " 31 " 2.1 yds. 20.9' 16 lbs '/3 stacking chair 457 mm mm 546 mm 800 mm 1.9 m 1.94 sqm 7.3 kg.59 cu Polished chrome stacking chair. Fully upholstered seat and back. Stacks 6 high. Sonar will stack 10 high when used with stacking cart Approved for GSA. Contract GS-28F-7040G. 40

41 guest st. etienne " 25" 23 " 24 " 33" 2.4 yds 29.3' 32 lbs '/2 495 mm 635 mm 597 mm 622 mm 838 mm 2.2 m 2.7 sqm 14.5 kg.98 cu Parawood solids. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F-7040G. st. germain " - 19 " 23 " 44" 2.4 yds. 27.2' 50 lbs '/1 762 mm mm 597 mm 1118 mm 2.2 m 2.5 sqm 22.7 kg.43 cu Bar stool. Parawood solids. Stainless steel stretcher guard. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F-7040G. st. michel " - 20 " 25" 33" 2.4 yds. 29.3' 34 lbs '/2 495 mm mm 635 mm 838 mm 2.2 m 2.7 sqm 15.4 kg.81 cu Parawood solids. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. See terms and conditions. Standard with welt. Approved for GSA. Contract GS-28F-7040G. strada π" 26 " 21 " 21 " 32 " lbs '/4 stacking chair 470 mm 664 mm 546 mm 546 mm 816 mm kg..59 cu. List Price 852 Brushed nickel stacking chair. Exposed maple shell. Stacks five high with stacking cart Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. strada π" 26 " 21 " 21 " 32 " 1.8 yds lbs '/3 stacking chair 470 mm 664 mm 546 mm 546 mm 816 mm 1.6 m 1.9 sqm kg..59 cu Brushed nickel stacking chair. Fully upholstered shell. Stacks five high with stacking cart Certain patterned or striped fabrics are not suitable for application. Solids, textures and leathers are recommended. Consult your sales representative for Bernhardt Textiles suitable for application on this product. *All COM/COL fabrics must be preapproved. Pile fabrics are not recommended for stackable application. Approved for GSA. Contract GS-28F-7040G. 41

42 guest studio 1453C 19" 27 " 22" 21 " 32 " 1.0 yds. 18.7' 30 lbs '/2 483 mm 692 mm 559 mm 546 mm 826 mm.9 m 2.2 sqm 13.6 kg.98 cu Brushed nickel. Maple solids on back and arms. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. studio 1453CS 30 " 38π" 22 " 21 " 43 " 1.0 yds. 18.7' 45 lbs '/1 775 mm 984 mm 572 mm 546 mm 1105 mm 0.9 m 1.7 sqm 20.4 kg.43 cu Barstool. Brushed nickel. Maple solids on back and arms. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. ven " 24 " 26π" 26 " 31Ω" 7.0 yds ' 62 lbs '/1 457 mm 622 mm 679 mm 673 mm 797 mm 6.4 m 9.8 sqm 28.1 kg.63 cu Fully upholstered. Stationary. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and base yardage: 2.25 yds. leather: 40.0 sq. ft. B) One fabric or leather for inside back and arms, outer shell yardage: 3.75 yds. leather: 62.5 sq. ft. C) One fabric or leather for outer shell border yardage: 1.25 yds. leather: 20.0 sq. ft. ven " 24 " 26π" 26 " 31Ω" 7.0 yds ' 57 lbs '/1 457 mm 622 mm 679 mm 673 mm 797 mm 6.4 m 9.8 sqm 25.9 kg.63 cu Fully upholstered. Casters. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and base yardage: 2.25 yds. leather: 40.0 sq. ft. B) One fabric or leather for inside back and arms, outer shell yardage: 3.75 yds. leather: 62.5 sq. ft. C) One fabric or leather for outer shell border yardage: 1.25 yds. leather: 20.0 sq. ft. 42

43 guest ven " 24 " 26π" 26 " 31Ω" 7.0 yds ' 72 lbs '/1 457 mm 622 mm 679 mm 673 mm 797 mm 6.4 m 9.8 sqm 32.7 kg.63 cu Fully upholstered. Swivel. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and base yardage: 2.25 yds. leather: 40.0 sq. ft. B) One fabric or leather for inside back and arms, outer shell yardage: 3.75 yds. leather: 62.5 sq. ft. C) One fabric or leather for outer shell border yardage: 1.25 yds. leather: 20.0 sq. ft. washington " 27 " 26" 22 " 39 " 1.0 yds. 18.7' 30 lbs '/2 508 mm 699 mm 660 mm 572 mm 1003 mm 0.9 m 1.7 sqm 13.6 kg.98 cu GREENGUARD Certified Parawood solids with laminated face-veneered back panel. Available only in finishes 805, 823, 834, 836, 839, 841, 845, 860, 861, 866 and 870. When specifying light finish 836 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. whisper " 24 " 21 " 24 " 31 " 2.25 yds. 30.0' 30 lbs '/2 489 mm 632 mm 537 mm 625 mm 810 mm 2.1 m 2.8 sqm 13.6 kg.98 cu Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Approved for GSA. Contract GS-28F-7040G. stacking cart " 42" 39 " lbs '/ mm 1067 mm 1003 mm kg.73 cu. List Price 1110 GREENGUARD Certified Mobile cart for stacking chairs. Silver powdercoated steel. 2 locking casters. Accommodates the following Bernhardt Design stacking chairs: Audio - 12 high, Levy - 15 high, 1465 and 1468 Lido - 8 high, 1466 and 1467 Lido - 6 high, Orbit - 10 high, Sonar - 10 high, and Strada - 5 high. Approved for GSA. Contract GS-28F-7040G. 43

44 lounge alex π" 31" 104" 34π" 31" ' 275 lbs '/1 451 mm 787 mm 2642 mm 883 mm 787 mm sqm kg 2.8 cu. COL 5199 Walnut base with bronze metal ring on legs. Leather belt detail on inside seat back and arms with 2 buttons at end of belt and 3 buttons on seat. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Available in leather or suede only When using a combination of leather or suede, the following square footage must be used and upcharges apply. See terms and conditions for contrasting upholstery upcharges. A) One leather or suede for seat cushion, inside back cushion and inside arm leather: sq. ft. B) One leather or suede for outer shell: back, sides, top and front rim, front bottom rail leather: sq. ft. C) One leather or suede for belt on inside back and 5 buttons leather: 6.0 sq. ft. Please specify the leather or suede application by designating the appropriate letter on the purchase order. algonquin " 25" 33" 32" 32" 5.4 yds ' 67 lbs '/RP 470 mm 635 mm 838 mm 813 mm 813 mm 4.9 m 10.4 sqm 30.4 kg.62 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. algonquin " 25" 60" 32" 32" 8.4 yds ' 111 lbs '/RP 470 mm 635 mm 1524 mm 813 mm 813 mm 7.7 m 15.6 sqm 50.4 kg 1.26 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. algonquin " 25" 83" 32" 32" 10.8 yds ' 142 lbs '/RP 470 mm 635 mm 2108 mm 813 mm 813 mm 9.9 m 20.3 sqm 64.4 kg 1.74 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. 44

45 lounge amri " 19 " 33 " 34" 32π" 7.3 yds ' 85 lbs '/1 406 mm 496 mm 851 mm 864 mm 832 mm 6.7 m 9.8 sqm 38.6 kg 1.0 cu Fully upholstered. Stationary. Four concealed legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. amri " 19 " 33 " 34" 32π" 7.3 yds ' 95 lbs '/1 406 mm 496 mm 851 mm 864 mm 832 mm 6.7 m 9.8 sqm 43.1 kg 1.0 cu Fully upholstered. Swivel. Self-return base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. anne " 27π" 25 " 25" 29 " ' 25 lbs '/1 419 mm 705 mm 651 mm 635 mm 749 mm sqm 11.4 kg.63 cu. COL 2987 Walnut. Available in natural oiled LV8 finish only. Flange stitch seat. Not recommended for high use areas. Available in leather or suede only atlantic " 24 " 35 " 29π" 28" 6.5 yds ' 100 lbs '/1 445 mm 622 mm 902 mm 756 mm 711 mm 5.9 m 10.2 sqm 45.4 kg.91 cu Fully upholstered. Maple solids. Semi-attached seat and back cushions with a welt perimeter. All other seams are top stitched. Available in all finishes. When specifying light finishes 836, 837, 840, 850, 865 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Welt on the seat and back cushion. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for inside seat cushion and back yardage: 4 yds. leather: 59.0 sq. ft. B) One fabric or leather for outside arms, inside arms yardage: 3.5 yds. leather: 53.0 sq. ft. 45

46 lounge b.1 16 " 26" 31 " 31 " 29" 6.4 yds ' 70 lbs '/ mm 660 mm 800 mm 800 mm 737 mm 5.9 m 10.7 sqm 31.8 kg 1.0 cu Saddle Stitch Fully upholstered. Standard HR foam back pillow. Brushed nickel legs. Certain two-way patterns or small horizontal designs are not suitable for application on this product. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 4.2 yds leather: 79.5 sq. ft. B) One fabric or leather for seat yardage: 1.4 yds leather: 23.0 sq. ft. C) One fabric or leather for back pillow yardage:.9 yds leather: 14.6 sq. ft. b.1 17 " 26 " 35 " 32 " 29 " 6.7 yds ' 99 lbs '/1 445 mm 667 mm 902 mm 826 mm 749 mm 6.1 m 11.9 sqm 44.9 kg.91 cu AS 4302AS Saddle Stitch Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. Certain two-way patterns or small horizontal designs are not suitable for application on this product. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4302BS, 4302BF 4302BS Saddle Stitch 4302BF Flange Stitch available on leather, suede or thick felt only Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4302AS, 4302BS or 4302BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 4.9 yds leather: 85.8 sq. ft. B) One fabric or leather for seat yardage: 1.3 yds leather: 25.1 sq. ft. C) One fabric or leather for back pillow yardage:.9 yds leather: 10.5 sq. ft. 46

47 lounge b.1 17 " 26 " 62" 33 " 30" 9.6 yds ' 115 lbs '/1 445 mm 667 mm 1575 mm 851 mm 762 mm 8.8 m 18.1 sqm 52.2 kg 1.93 cu AS 4335AS Saddle Stitch Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4335BS, 4335BF 4335BS Saddle Stitch 4335BF Flange Stitch available on leather, suede or thick felt only Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4335AS, 4335BS or 4335BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 6.7 yds leather: sq. ft. B) One fabric or leather for seat yardage: 2.5 yds leather: 54.4 sq. ft. C) One fabric or leather for back pillow yardage: 2.4 yds leather: 37.7 sq. ft. b.1 17 " 26 " 95" 33 " 30" 17.7 yds ' 165 lbs '/1 445 mm 667 mm 2413 mm 851 mm 762 mm 16.2 m 27.2 sqm 76.2 kg 2.77 cu AS 4337AS Saddle Stitch Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4337BS, 4337BF 4337BS Saddle Stitch 4337BF Flange Stitch available on leather, suede or thick felt only Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4337AS, 4337BS or 4337BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 8.6 yds leather: sq. ft. B) One fabric or leather for seat yardage: 5.6 yds leather: 92.1 sq. ft. C) One fabric or leather for back pillow yardage: 4.1 yds leather: 39.8 sq. ft. 47

48 lounge b.1 17 " 26 " 61 " 33 " 30" 12.1 yds ' 100 lbs '/1 445 mm 667 mm 1562 mm 851 mm 762 mm 11.1 m 17.9 sqm 45.4 kg 1.93 cu AS 4315AS Saddle Stitch Left Arm Facing. Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4315BS, 4315BF 4315BS Saddle Stitch 4315BF Flange Stitch available on leather, suede or thick felt only Left Arm Facing. Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4315AS, 4315BS or 4315BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 4.9 yds leather: 94.2 sq. ft. B) One fabric or leather for seat yardage: 3.8 yds leather: 52.3 sq. ft. C) One fabric or leather for back pillow yardage: 2.8 yds leather: 39.8 sq. ft. b.1 17 " 26 " 61 " 33 " 30" 12.1 yds ' 100 lbs '/1 445 mm 667 mm 1562 mm 851 mm 762 mm 11.1 m 17.9 sqm 45.4 kg 1.93 cu AS 4325AS Saddle Stitch Right Arm Facing. Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4325BS, 4325BF 4325BS Saddle Stitch 4325BF Flange Stitch available on leather, suede or thick felt only Right Arm Facing. Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4325AS, 4325BS or 4325BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 4.9 yds leather: 94.2 sq. ft. B) One fabric or leather for seat yardage: 3.8 yds leather: 52.3 sq. ft. C) One fabric or leather for back pillow yardage: 2.8 yds leather: 39.8 sq. ft. 48

49 lounge b.1 17 " 26 " 89 " 33 " 30" 17.2 yds ' 185 lbs '/1 445 mm 667 mm 2273 mm 851 mm 762 mm 15.7 m 25.3 sqm 83.9 kg 2.88 cu AS 4317AS Saddle Stitch Left Arm Facing. Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. *All COM/COL fabric must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4317BS, 4317BF 4317BS Saddle Stitch 4317BF Flange Stitch available on leather, suede or thick felt only Left Arm Facing. Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4317AS, 4317BS or 4317BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric welt upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 6.3 yds leather: sq. ft. B) One fabric or leather for seat yardage: 6.2 yds leather: 85.8 sq. ft. C) One fabric or leather for back pillow yardage: 4.1 yds leather: 60.7 sq. ft. b.1 17 " 26 " 89 " 33 " 30" 17.2 yds ' 185 lbs '/1 445 mm 667 mm 2273 mm 851 mm 762 mm 15.7 m 25.3 sqm 83.9 kg 2.88 cu AS 4327AS Saddle Stitch Right Arm Facing. Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4327BS, 4327BF 4327BS Saddle Stitch 4327BF Flange Stitch available on leather, suede or thick felt only Right Arm Facing. Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4327AS, 4327BS or 4327BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 6.3 yds leather: sq. ft. B) One fabric or leather for seat yardage: 6.2 yds leather: 85.8 sq. ft. C) One fabric or leather for back pillow yardage: 4.1 yds leather: 60.7 sq. ft. Please specify the fabric or leather application by designating the appropriate letter on the purchase order 49

50 lounge b.1 17 " 26 " 33 " 33 " 30" 7.0 yds ' 100 lbs '/1 445 mm 667 mm 851 mm 851 mm 762 mm 6.4 m 12.2 sqm 45.4 kg.91 cu AS 4390AS Saddle Stitch Corner Unit. Fully upholstered. Loosely structured dacron wrapped foam back pillows. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 4390BS, 4390BF 4390BS Saddle Stitch 4390BF Flange Stitch available on leather, suede or thick felt only Corner Unit. Fully upholstered. Standard HR foam back pillow. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers for 4390AS, 4390S or 4390BF, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for outside arms, inside arms, outside back, inside back and front panel yardage: 3.5 yds leather: 69.1 sq. ft. B) One fabric or leather for seat yardage: 1.3 yds leather: 25.1 sq. ft. C) One fabric or leather for back pillow yardage: 2.1 yds leather: 37.7 sq. ft. b P " 2 " 11" 1.5 yds. 2.5' 5 lbs..24'/ mm 57 mm 279 mm 1.4 m.23 sqm.4 kg.1 cu Accent pillow. Unstructured dacron-filled. Saddle stitch. Use with 4335, 4325 and *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. b P " 2 " 11" 1.5 yds. 2.5' 5 lbs..24'/ mm 57 mm 279 mm 1.4 m.23 sqm.4 kg.1 cu Accent pillow. Unstructured dacron-filled. Saddle stitch. Use with 4337, 4327 and *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 50

51 lounge b S, 6902F 16" - 29" 29" 27" 3.3 yds. 43.9' 60 lbs '/1 406 mm mm 737 mm 686 mm 3.0 m 4.1 sqm 27.2 kg.64 cu S Saddle Stitch 6902F Flange Stitch available on leather, suede or thick felt only Fully upholstered. Brushed nickel frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G b S, 6903F 16" 19 29" 28 " 27" 3.5 yds. 56.5' 83 lbs '/1 406 mm 495 mm 737 mm 724 mm 686 mm 3.2 m 5.2 sqm 37.6 kg.64 cu S Saddle Stitch 6903F Flange Stitch available on leather, suede or thick felt only Fully upholstered. Brushed nickel frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance 6852, 6852H 17" - 31 " 31 " 27 " 4.0 yds. 63.0' 75 lbs '/RP 432 mm mm 800 mm 699 mm 3.7 m 6.0 sqm 34.1 kg 1.0 cu Lounge 6852H Lounge with handle Fully upholstered. Polished chrome frame. 6852H - Flush mount handle installed in back. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance 6852L, 6852LH 17" - 48" 31 " 27 " 4.0 yds. 63.0' 112 lbs '/1 432 mm mm 800 mm 699 mm 3.7 m 6.0 sqm 50.8 kg 1.93 cu L Tablet arm left side 6852LH Tablet arm left side. Lounge with handle Fully upholstered. Polished chrome frame. Tablet arm left side (seated position). 16 d Maple top. Tablet height 23π. 6852LH - Flush mount handle installed in back. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance 6852R, 6852RH 17" - 48" 31 " 27 " 4.0 yds. 63.0' 112 lbs '/1 432 mm mm 800 mm 699 mm 3.7 m 6.0 sqm 50.8 kg 1.93 cu R Tablet arm right side 6852RH Tablet arm right side. Lounge with handle Fully upholstered. Polished chrome frame. Tablet arm right side (seated position). 16 d Maple top. Tablet height 23π. 6852RH - Flush mount handle installed in back. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 51

52 lounge balance " - 63" 31 " 27 " 5.5 yds ' 120 lbs '/1 432 mm mm 800 mm 699 mm 5.1 m 10.5 sqm 54 kg 1.93 cu Fully upholstered. Polished chrome frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance 6857L 17" - 79" 31 " 27 " 5.5 yds ' 150 lbs '/1 432 mm mm 800 mm 699 mm 5.1 m 10.5 sqm 67 kg 2.88 cu Fully upholstered. Polished chrome frame. Tablet arm left side (seated position). 16 d maple top. Tablet height 23π. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance 6857R 17" - 79" 31 " 27 " 5.5 yds ' 150 lbs '/1 432 mm mm 800 mm 699 mm 5.1 m 10.5 sqm 67 kg 2.88 cu Fully upholstered. Polished chrome frame. Tablet arm right side (seated position). 16 d maple top. Tablet height 23π. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. balance " - 19" 19" 18 " 2.8 yds. 27.8' 20 lbs. 7.0'/1 470 mm mm 483 mm 470 mm 2.6 m 2.6 sqm 9 kg.19 cu Mobile Stool. Fully upholstered. Six casters. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for top seat panel yardage: 0.8 yds. leather: 6.8 sq. ft. B) One fabric or leather for body yardage: 2.0 yds. leather: 21.0 sq. ft. balance " - 20 " 20" 18" 2.3 yds. 20.0' 35 lbs. 7.0'/1 457 mm mm 508 mm 457 mm 2.1 m 1.9 sqm 15.9 kg.19 cu Bench. Fully upholstered. Polished chrome frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 52

53 lounge balance " - 41 " 20" 18" 2.8 yds. 37.7' 55 lbs '/1 457 mm mm 508 mm 457 mm 2.6 m 3.5 sqm 24.9 kg.84 cu Bench. Fully upholstered. Polished chrome frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G balance " - 63" 20" 18" 3.6 yds. 54.4' 85 lbs '/1 457 mm mm 508 mm 457 mm 3.3 m 5.1 sqm 38.6 kg.84 cu Bench. Fully upholstered. Polished chrome frame. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. bardot " 22 " 32" 34Ω" 30" yds ' 90 lbs '/1 432 mm 575 mm 813 mm 873 mm 762 mm 9.8 m 16.3 sqm 40.8 kg 1.0 cu Fully upholstered. Fabric must be non-railroaded. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat cushion and seat welt, inside back and arms, front panel yardage: 5.0 yds. leather: 81.0 sq. ft. B) One fabric or leather for outer shell and rim yardage: 6.5 yds. leather: sq. ft. C) One fabric or leather for inner arm welt yardage:.5 yds. leather: 10.0 sq. ft. bardot " 22 " 75" 34Ω" 30" 16.5 yds ' 180 lbs '/1 432 mm 575 mm 1905 mm 873 mm 762 mm 15.1 m 26.9 sqm 81.6 kg 2.28 cu Fully upholstered. Fabric must be non-railroaded. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat cushion and seat welt, inside back and arms, front panel yardage: 7.25 yds. leather: sq. ft. B) One fabric or leather for outer shell and rim yardage: 8.75 yds. leather: sq. ft. C) One fabric or leather for inner arm welt yardage:.5 yds. leather: 10.0 sq. ft. 53

54 lounge bardot " 22 " 87" 34Ω" 30" 17.0 yds ' 210 lbs '/1 432 mm 575 mm 2210 mm 873 mm 762 mm 15.5 m 27.9 sqm 95.3 kg 2.88 cu Fully upholstered. Fabric must be non-railroaded. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat cushion and seat welt, inside back and arms, front panel yardage: 7.75 yds. leather: sq. ft. B) One fabric or leather for outer shell and rim yardage: 9.25 yds. leather: sq. ft. C) One fabric or leather for inner arm welt yardage:.5 yds. leather: 10.0 sq. ft. blaine 17π" 22 " 29 " 31" 33" 6.8 yds ' 87 lbs '/ mm 572 mm 749 mm 787 mm 838 mm 6.2 m 11.1 sqm 39.5 kg 1.0 cu Low Back. Fully upholstered. Maple base available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Welt standard along bottom edge.*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric/welt upcharges. A) One fabric or leather for seat, inside back and front panel below seat cushion yardage: 2.75 yds. leather: 40.0 sq. ft. B) One fabric or leather for outside back and sides, inside arms, welt yardage: 4.0 yds. leather: 54.0 sq. ft. 17π" 24 "* 31Ω"* 34 "* 33"* 6.8 yds ' 90 lbs '/1 6458LTB, -LTS, -LTW 451 mm 632 mm 797 mm* 770 mm* 838 mm* 6.2 m 11.1 sqm 40.8 kg 1.0 cu LTB Tablet Arm, Left Facing - Brown 6458RTB Tablet Arm, Right Facing - Brown 6458LTS Tablet Arm, Left Facing - Sand 6458RTS Tablet Arm, Right Facing - Sand 6458LTW Tablet Arm, Left Facing - White 6458RTW Tablet Arm, Right Facing - White 6458RTB, -RTS, -RTW Low Back / Tablet Arm. Oval tablet 15"w, 11"d. 360 rotation around center of arm. Available in Brown, Sand and White powdercoat finish. Tablet is designed for light weight use and is not recommended for high use areas. *Dimensions include tablet arm in user position. Maximum rotation dimensions: 41 "d; 40 "w. Fully upholstered. Maple base available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Welt standard along bottom edge.*all COM/COL fabrics must be preapproved by Bernhart Design prior to application. Approved for GSA Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric/welt upcharges. A) One fabric or leather for seat, inside back and front panel below seat cushion yardage: 2.75 yds. leather: 40.0 sq. ft. B) One fabric or leather for outside back and sides, inside arms, welt yardage: 4.0 yds. leather: 54.0 sq. ft. 54

55 lounge blaine π" 22 " 72" 31" 33" yds ' lbs '/1 451 mm 572 mm 1829 mm 787 mm 838 mm 10.3 m 18.6 sqm 66.7 kg 2.84 cu Low Back. Fully upholstered. Maple base available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Welt standard along bottom edge.*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric/welt upcharges. A) One fabric or leather for seat, inside back and front panel below seat cushion yardage: 5.5 yds. leather: sq. ft. B) One fabric or leather for outside back and sides, inside arms, welt yardage: 6.5 yds. leather: sq. ft. blaine π" 22 " 29 " 35 " 41 " 7.65 yds ' 90 lbs '/1 451 mm 572 mm 749 mm 895 mm 1054 mm 7.0 m 13.0 sqm 40.8 kg 1.21 cu Fully upholstered. High back with 8'' x 23''w pillow secured with 2 snaps, non-reversible. Maple. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Welt standard along bottom edge. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat, inside back and front panel below seat cushion yardage: 2.5 yds. leather: 37.0 sq. ft. B) One fabric or leather for outside back and sides, inside arms, welt yardage: 5.4 yds. leather: 72.9 sq. ft. C) One fabric or leather for pillow yardage: 1.0 yd. leather: 13.5 sq. ft. blaine π" 22 " 29 " 35 " 41 " 7.25 yds ' 90 lbs '/1 451 mm 572 mm 749 mm 895 mm 1054 mm 6.6 m 13.0 sqm 40.8 kg 1.21 cu Fully upholstered. High back. Maple. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Welt standard along bottom edge.*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat, inside back and front panel below seat cushion yardage: 2.5 yds. leather: 37.0 sq. ft. B) One fabric or leather for outside back and sides, inside arms, welt yardage: 5.4 yds. leather: 72.9 sq. ft. 55

56 lounge calibra " 23 " 34" 38" 27" 9.0 yds ' 150 lbs '/1 432 mm 597 mm 864 mm 965 mm 686 mm 8.2 m 12.1 sqm 67.0 kg.91 cu Fully upholstered. Plain cushions. Polished aluminum legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. calibra B 17" 23 " 34" 38" 27" 9.0 yds ' 150 lbs '/1 432 mm 597 mm 864 mm 965 mm 686 mm 8.2 m 12.1 sqm 67.0 kg.91 cu Fully upholstered. Stitch detail on cushions. Polished aluminum legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used. A) One fabric or leather for seat and back cushions yardage: 4 yds. leather: 52.0 sq. ft. B) One fabric or leather for entire outer shell and front panel yardage: 6.0 yds. leather: 85.0 sq. ft. C) One fabric or leather for top strip on back cushion yardage:.25 yds. leather: 2.0 sq. ft. D) One fabric or leather for bottom strip on back cushion yardage:.25 yds. leather: 2.0 sq. ft. E) One fabric or leather for seat stripe yardage:.25 yds. leather: 2.0 sq. ft. calibra " 23 " 75 " 37 " 27" 15.5 yds ' 235 lbs '/1 432 mm 597 mm 1918 mm 953 mm 686 mm 14.2 m 21.1 sqm kg 2.28 cu Fully upholstered. Plain cushions. Polished aluminum legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. calibra B 17" 23 " 75 " 37 " 27" 15.5 yds ' 235 lbs '/1 432 mm 597 mm 1918 mm 953 mm 686 mm 14.2 m 21.1 sqm kg 2.28 cu Fully upholstered. Stitch detail on cushions. Polished aluminum legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used. A) One fabric or leather for seat and back cushions yardage: 7.5 yds. leather: sq. ft. B) One fabric or leather for entire outer shell and front panel yardage: 9.5 yds. leather: sq. ft. C) One fabric or leather for top stripe on back cushion yardage:.50 yds. leather: 4.0 sq. ft. D) One fabric or leather for bottom stripe on back cushion yardage:.50 yds. leather: 4.0 sq. ft. E) One fabric or leather for seat stripe yardage:.50 yds. leather: 4.0 sq. ft. 56

57 lounge calibra " 23 " 107 " 37 " 27" 19.0 yds ' 335 lbs '/1 432 mm 597 mm 2731 mm 953 mm 686 mm 17.4 m 26.0 sqm kg 2.77 cu Fully upholstered. Plain cushions. Polished aluminum legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. calibra B 17" 23 " 107 " 37 " 27" 19.0 yds ' 335 lbs '/1 432 mm 597 mm 2731 mm 953 mm 686 mm 17.4 m 26.0 sqm kg 2.77 cu Fully upholstered. Stitch detail on cushions. Polished aluminum legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used. A) One fabric or leather for seat and back cushions yardage: yds. leather: sq. ft. B) One fabric or leather for entire outer shell and front panel yardage: 10.0 yds. leather: sq. ft. C) One fabric or leather for top stripe on back cushion yardage:.50 yds. leather: 4.0 sq. ft. D) One fabric or leather for bottom stripe on back cushion yardage:.50 yds. leather: 4.0 sq. ft. E) One fabric or leather for seat stripe yardage:.50 yds. leather: 4.0 sq. ft. catherine " 21" 34" 32π" 29 " 5.0 yds. 75.0' 60 lbs '/1 387 mm 533 mm 864 mm 832 mm 743 mm 4.6 m 7.0 sqm 27.2 kg 1.0 cu Upholstered with exposed wood trim. Solid maple. Available in all finishes. When specifying light finishes 836, 837, 840, 850, 865 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Welt around perimeter of the wood trim. Height of arm: 21" at center. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 57

58 lounge chase " 25 " 33 " 30 " 31" 5.4 yds ' 62 lbs '/1 445 mm 648 mm 851 mm 775 mm 787 mm 4.9 m 9.5 sqm 28.1 kg 1.0 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat cushion yardage: 1.6 yds leather: 20.9 sq. ft. B) One fabric or leather for back pillow yardage:.7 yds leather: 12.6 sq. ft. C) One fabric or leather for outside back and arms, inside back and arms, and front panel yardage: 4.3 yds leather: 69.1 sq. ft. chiara " - 33" 29" 29" 4.2 yds. 57.0' 54 lbs '/1 419 mm mm 737 mm 737 mm 3.8 m 5.3 sqm 24.5 kg 1.0 cu Fully upholstered. Self-return swivel. Polished aluminum base. Certain horizontal stripes, plaids or fabrics with very little stretch are not suitable for this product. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat yardage: 1.0 yds. leather: 13.7 sq. ft. B) One fabric or leather inside and outside shell yardage: 3.2 yds. leather: 43.3 sq. ft. cinema " 23 " 32 " 35 " 29" 6.5 yds ' 64 lbs '/1 419 mm 591 mm 826 mm 905 mm 737 mm 5.9 m 11.6sqm 29.1 kg 1.0 cu Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F- 7040G. 58

59 lounge -- modular Cinema Seating System Specification Guide Cinema is a modular seating product comprised of 15 unique modules which may be used interchangeably to create an unlimited number of configurations. To select the modules that are appropriate for your application use the guide below. Please visit Bernhardtdesign.com for a complete library of 2D and 3D models. You may also contact your local sales representative or the Bernhardt Design corporate office for specification assistance. Cinema is fully upholstered with leveling non-marring glides. All necessary ganging brackets are included and pre-installed. GREENGUARD and level l certified. Product Selection A. Arm Modules All Cinema configurations must include an arm module on each end of the configuration B. 45 Connecting Modules Connecting modules are used in conjunction with arm modules. Armless connecting modules may not be used at the end of a configuration or as a freestanding unit C Connecting Modules Connecting modules are used in conjunction with arm modules. Armless connecting modules may not be used at the end of a configuration or as a freestanding unit

60 lounge -- modular Cinema Seating System Specification Guide D. 90 Connecting Arm Modules Connecting modules are used in conjunction with arm modules. Armless connecting modules may not be used at the end of a configuration or as a freestanding unit E. Straight Connecting Modules Connecting modules are used in conjunction with arm modules. Armless connecting modules may not be used at the end of a configuration or as a freestanding unit

61 lounge -- modular Cinema Seating System Overview 61

62 lounge -- modular Cinema Seating System Sample Configurations Description Single Seat, Left Arm 4812 Single Seat, Right Arm 35 '' '' Single Seat, Left Arm 4810 Single Straight Connector 4812 Single Seat, Right Arm 35 '' π'' Seat, Left Arm Connector Seat, Right Arm 60 '' '' Seat, Left Arm Inverted Connector 4812 Single Seat, Right Arm 72π'' '' '' Seat, Left Arm Inverted Connector Seat, Right Arm 124π''

63 lounge -- modular Cinema Seating System Sample Configurations 6 Description Seat, Left Arm Inverted Connector Seat, Right Arm 91 '' '' Seat, Left Arm Connector Seat, Right Arm 72 '' π'' Seat, Left Arm 4820 Inverted Corner Connector Seat, Right Arm 131π'' '' Seat, Left Arm 4819 Corner Connector Seat, Right Arm 131π'' '' Seat, Left Arm Connector Seat, Right Arm 124π'' ''

64 lounge -- modular Cinema Seating System Sample Configurations Description Seat, Left Arm Connector Connector Seat, Right Arm 125'' '' Seat, Right Arm Inverted Connector Inverted Connector Seat, Left Arm 124π'' π'' Seat, Left Arm Inverted Connector 4810 Single Straight Connector Connector Seat, Right Arm 100 '' ''

65 lounge -- modular cinema " 23 " 35 " 35 " 29" 8.0 yds lbs '/1 491 mm 591 mm 892 mm 905 mm 737 mm 7.3 m 13.0 sqm 30.0 kg.91 cu Single Seat. Left Arm Facing Module. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " 23 " 35 " 35 " 29" 8.0 yds ' 66 lbs '/1 491 mm 591 mm 892 mm 905 mm 737 mm 7.3 m 13.0 sqm 30.0 kg.91 cu Single Seat. Right Arm Facing Module. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " 23 " 65π" 35 " 29" 14.3 yds ' 113 lbs '/1 419 mm 591 mm 1670 mm 905 mm 737 mm 13.1 m 21.8 sqm 51.4 kg 1.93 cu Seat. Left Arm Facing Module. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " 23 " 65π" 35 " 29" 14.3 yds ' 113 lbs '/1 419 mm 591 mm 1670 mm 905 mm 737 mm 13.1 m 21.8 sqm 51.4 kg 1.93 cu Seat. Right Arm Facing Module. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " 23 " 96 " 35 " 29" 20.2 yds ' 149 lbs '/1 419 mm 591 mm 2445 mm 905 mm 737 mm 18.5 m 30.4 sqm 67.7 kg 2.88 cu Seat. Left Arm Facing Module. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " 23 " 96 " 35 " 29" 20.2 yds ' 149 lbs '/1 419 mm 591 mm 2445 mm 905 mm 737 mm 18.5 m 30.4 sqm 67.7 kg 2.88 cu Seat. Right Arm Facing Module. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 65

66 lounge -- modular cinema " - 30 " 35 " 29" 6.9 yds ' 68 lbs '/1 419 mm mm 905 mm 737 mm 6.3 m 12.1 sqm 30.9 kg.91 cu Single Seat. Straight Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " - 35 " 35 " 29" 8.2 yds ' 69 lbs '/1 419 mm mm 905 mm 737 mm 7.5 m 13.0 sqm 31.4 kg 1.0 cu Corner Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " - 35 " 35 " 29" 6.3 yds ' 66 lbs '/1 419 mm mm 905 mm 737 mm 5.8 m 11.6 sqm 30.0 kg 1.0 cu Inverted Corner Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " - 45π" 37 " 29" 7.5 yds ' 85 lbs '/1 419 mm mm 956 mm 737 mm 6.9 m 12.5 sqm 38.6 kg 2.84 cu Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " - 65 " 39 " 29" 13.1 yds. 220' 103 lbs '/1 419 mm mm 997 mm 737 mm 6.9 m 20.4 sqm 46.8 kg 2.84 cu Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. GS-28F-7040G. 66

67 lounge -- modular cinema " - 83π" 42 " 29" 14.2 yds ' 125 lbs '/1 419 mm mm 1070 mm 737 mm 130 m 21.8 sqm 56.8 kg 2.84 cu Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " - 45" 37 " 29" 6.0 yds ' 78 lbs '/1 419 mm mm 952 mm 737 mm 5.5 m 10.2 sqm 35.5 kg 2.84 cu Inverted Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " - 65" 39π" 29" yds ' 96 lbs '/1 419 mm mm 1010 mm 737 mm 9.4 m 16.3 sqm 43.6 kg 2.84 cu Inverted Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " - 83" 42 " 29" 11.0 yds ' 128 lbs '/1 419 mm mm 1080 mm 737 mm 10.1 m 17.2 sqm 58.2 kg 2.84 cu Inverted Connector. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. cinema " 23 " 32 " 35 " 29" 6.5 yds ' 64 lbs '/1 419 mm 591 mm 826 mm 905 mm 737 mm 5.9 m 11.6sqm 29.1 kg 1.0 cu Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 67

68 16-3/8" 18-1/2" code Code Seating System Specification Guide Code is a seating system designed to provide privacy and create landscapes in open spaces. The system includes modular units which can be combined to create expanded sofas, U-Shaped and L-Shaped configurations. Individual freestanding privacy units are also available, as well as conventional chairs, settees and sofas. Please visit Bernhardtdesign.com for installation instructions as well as a library of 2D, 3D and Revit models. You may also contact your local sales representative or the Bernhardt Design corporate office for specification assistance. Privacy walls are attached to the seat prior to shipping. Please verify that the assembled sku is within size requirements for delivery (elevators, hall intersections, stairwells, etc.). Seat Height Selection Code units are available in two seat heights. Standard seat height is 16Ω''. Conference seat height is 18 ''. Product numbers ending with the suffix C are Conference height. 16Ω'' Standard Seat Height 18 '' Conference Seat Height Wall Selection Code privacy walls are available in two different models. Standard walls afford maximum privacy. Angled walls are lighter in appearance and provide improved seating access when used in a banquette application. Standard Wall Angled Wall inside view outside view inside view outside view 68

69 code Conventional Lounge Freestanding Privacy Lounge Modular Privacy Lounge 2195L 2195R 2195L 2197R R 2197L R 2177L 69

70 standard seat height Conventional Lounge code " - 30" 29 " 29 " 5 yds. 85' 64 lbs '/1 403 mm mm 749 mm 752 mm 4.6 m 7.9 sqm 29.1 kg.10 cu Fully upholstered. Concealed legs *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. code " - 60" 29 " 29 " 9 yds. 125' 130 lbs '/1 403 mm mm 749 mm 752 mm 8.2 m 11.6 sqm 59.1 kg 1.93 cu Fully upholstered. Concealed leg. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. code " - 90" 29 " 29 " yds. 165' 193 lbs '/1 403 mm mm 749 mm 752 mm 11.2 m 15.3 sqm 87.7 kg 2.88 cu Fully upholstered. Concealed legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 70

71 standard seat height Freestanding Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code Ω" 30" 42 " 31" 52π" 15.1 yds. 150 lbs '/1 416 mm 762 mm 1080 mm 787 mm 1340 mm 13.8 m 68.2 kg 1.68 cu Standard Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished cast aluminum feet on privacy wall. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.25 yds. leather: 80.0 sq. ft. B) One fabric for wall yardage: 10.0 yds. code Ω" 30" 42" 31" 52π" 15.1 yds. 150 lbs '/1 416 mm 762 mm 1067 mm 787 mm 1340 mm 13.8 m 68.2 kg 1.68 cu Angled Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.25 yds. leather: 80.0 sq. ft. B) One fabric for wall yardage: 10.0 yds. 71

72 standard seat height Freestanding Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code Ω" 30" 64 " 31" 52π" 20.8 yds. 246 lbs '/1 416 mm 762 mm 1638 mm 787 mm 1340 mm 19.0 m kg 2.50 cu Standard Wall. Fully upholstered. Two-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished cast aluminum feet on privacy wall. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 7.0 yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. code Ω" 30" 64" 31" 52π" 20.8 yds. 246 lbs '/1 416 mm 762 mm 1638 mm 787 mm 1340 mm 19.0 m kg 2.50 cu Angled Wall. Fully upholstered. Two-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 7.0 yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. 72

73 standard seat height Freestanding Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code Ω" 30" 94 " 31" 52π" yds. 316 lbs '/1 416 mm 762 mm 2400 mm 787 mm 1340 mm 24.9 m kg 3.60 cu Standard Wall. Fully upholstered. Three-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished cast aluminum feet on privacy wall. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 11.0 yds. leather: sq. ft. B) One fabric for wall yardage: 16.4 yds. code Ω" 30" 94" 31" 52π" yds. 316 lbs '/1 416 mm 762 mm 2388 mm 787 mm 1340 mm 24.9 m kg 3.60 cu Angled Wall. Fully upholstered. Three-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 11.0 yds. leather: sq. ft. B) One fabric for wall yardage: 16.4 yds. 73

74 standard seat height Modular Privacy Lounge - Standard Seat Height Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 16Ω" 30" 32 " 31" 52π" yds. 150 lbs '/1 416 mm 762 mm 819 mm 787 mm 1340 mm 10.3 m 68.2 kg 1.41 cu L 2191R Standard Wall. 2191L Left Wall Facing. Fully upholstered. Single-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Standard Wall. 2191R Right Wall Facing. Fully upholstered. Single-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 4.75 yds. leather: 70.0 sq. ft. B) One fabric for wall yardage: 6.5 yds. code 16Ω" 30" 32" 31" 52π" yds. 150 lbs '/1 416 mm 762 mm 813 mm 787 mm 1340 mm 10.3 m 68.2 kg 1.41 cu L Angled Wall. 2171L Left Wall Facing. Fully upholstered. Single-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Angled Wall. 2171R Right Wall Facing. Fully upholstered. Single-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 2171R *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 4.75 yds. leather: 70.0 sq. ft. B) One fabric for wall yardage: 6.5 yds. 74

75 standard seat height Modular Privacy Lounge - Standard Seat Height Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 16Ω" 30" 62 " 31" 52π" 17.7 yds. 220 lbs '/1 416 mm 762 mm 1581 mm 787 mm 1340 mm 16.2 m kg 2.40 cu L 2195R Standard Wall. 2195L Left Wall Facing. Fully upholstered. Two-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Standard Wall. 2195R Right Wall Facing. Fully upholstered. Two-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 7.5 yds. leather: sq. ft. B) One fabric for wall yardage: 10.5 yds. code 16Ω" 30" 62" 31" 52π" 17.7 yds. 220 lbs '/1 416 mm 762 mm 1575 mm 787 mm 1340 mm 16.2 m kg 2.40 cu L Angled Wall. 2175L Left Wall Facing. Fully upholstered. Two-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Angled Wall. 2175R Right Wall Facing. Fully upholstered. Two-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 2175R *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 7.5 yds. leather: sq. ft. B) One fabric for wall yardage: 10.5 yds. 75

76 standard seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 16Ω" 30" 92 " 31" 52π" 23.8 yds. 289 lbs '/1 416 mm 762 mm 2343 mm 787 mm 1340 mm 21.8 m 131.4kg 3.50 cu L Standard Wall. 2197L Left Wall Facing. Fully upholstered. Three-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Standard Wall. 2197R Right Wall Facing. Fully upholstered. Three-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G R *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 10.0 yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. code 16Ω" 30" 92" 31" 52π" 23.8 yds. 289 lbs '/1 416 mm 762 mm 2337 mm 787 mm 1340 mm 21.8 m kg 3.50 cu L Angled Wall. 2177L Left Wall Facing. Fully upholstered. Three-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Angled Wall. 2177R Right Wall Facing. Fully upholstered. Three-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 2177R *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 10.0 yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. 76

77 standard seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code Ω" 30" 33" 33" 52π" 12.4 yds. 134 lbs '/1 416 mm 762 mm 838 mm 838 mm 1340 mm 11.3 m 60.9 kg 1.41 cu Corner Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Corner Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.0 yds. leather: 75.0 sq. ft. B) One fabric for wall yardage: 7.5 yds. code Ω" 30" 30" 31" 52π" 8.75 yds. 141 lbs ''/1 416 mm 762 mm 762 mm 787 mm 1340 mm 8.0 m 64.1 kg 1.41 cu Connecting Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Connecting Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.25 yds. leather: sq. ft. B) One fabric for wall yardage: 3.5 yds. 77

78 standard seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code Ω" 30" 36" 31" 52π" 8.75 yds. 141 lbs '/1 416 mm 762 mm 914 mm 787 mm 1340 mm 8.0 m 64.1 kg 1.41 cu Connecting Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Connecting Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.25 yds. leather: sq. ft. B) One fabric for wall yardage: 3.5 yds. code Ω" 30" 42" 31" 52π" 8.75 yds lbs '/1 416 mm 762 mm 1067 mm 787 mm 1340 mm 8.0 m 71.8 kg 1.57 cu Connecting Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Connecting Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.25 yds. leather: sq. ft. B) One fabric for wall yardage: 3.5 yds. 78

79 standard seat height Code + Quiet Tables A limited offering of Quiet Tables is available to work in conjunction with Code seating. They were designed specifically to create a banquette configuration for dining or work. The tables may be used within a modular configuration or with freestanding privacy units. Angled walls are recommended in these settings for maximum seating access. Bases are brushed stainless steel. Surface Selection Oak Veneer Order Code - C Rift Cut Walnut Veneer Order Code - 9 Quarter Cut, Slip Matched Maple Veneer Order Code - E Quarter Cut, Slip Matched Laminate Order Code - F Brite White Corian Order Code - 8 Glacier White Standard Finish Standard Finish Standard Finish Standard Finish 611 Formica Edge Profiles Wood Laminate Corian Power Module The Power Module is a simple and clean way of bringing power and USB to the worksurface. The Power Module installs flush to the worksurface and provides one grounded outlet and one amp USB duplex, ideal for charging tablets or other USB friendly devices. Power Module is UL approved with spill-proof technology and a 15 amp 72'' cord. This Power Module is available for Code + Quiet Tables only. One Power Module is provided in the center of the table when power is specified. Max. Worksurface Thickness 1.5'' Ω'' 3'' 3 '' 3Ω'' 2Ω'' 4'' 79

80 standard seat height Modular Privacy Lounge Standard Seat Height 23π'' For Use with Modular Privacy Lounge 96'' 102 '' '' 30'' x 54'' 125'' 2175L 2175R 2177L 36'' x 84'' 2177R 2'' 2'' 2'' 2'' Code 2160 Connecting Wall - use 30'' Table Table has a 2'' clearance on each side Code 2161 Connecting Wall - use 36'' Table Table has a 2'' clearance on each side For Use with Freestanding Privacy Lounge 64'' 94'' '' 84'' 80

81 standard seat height 54'' x 30'' Tables For use with 2160 connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 54'' x 30'' for use with round base $ 824 $ 927 $ $ for use with square base '' x 30'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C oak E maple 9 walnut F white laminate 8 corian - glacier white L description sku w d h weight specifications price round base mid height JC π '' dia. base $ '' column use with 54'' x 30'' table tops specify 2 bases square base mid height KC4 17π 17π 22π 32 17π'' sq. base '' column use with 54'' x 30'' table tops specify 2 bases specification codes for bases series sku L 81

82 standard seat height 54'' x 36'' Tables For use with 2161 connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 54'' x 36'' for use with round base $ 927 $ 1020 $ $ for use with square base '' x 36'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C E 9 F 8 oak maple walnut white laminate corian - glacier white L description sku w d h weight specifications price round base mid height JC π '' dia. base $ '' column use with 54'' x 36'' table tops specify 2 bases square base mid height KC4 17π 17π 22π 32 17π'' sq. base '' column use with 54'' x 36'' table tops specify 2 bases specification codes for bases series sku L 82

83 standard seat height 84'' x 30'' Tables For use with 2160 connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 84'' x 30'' for use with round base $ 1133 $ 1236 $ $ for use with square base '' x 30'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C E 9 F 8 oak maple walnut white laminate corian - glacier white L description sku w d h weight specifications price round base mid height JC π '' dia. base $ '' column use with 84'' x 30'' table tops specify 2 bases square base mid height KC4 17π 17π 22π 32 17π'' sq. base '' column use with 84'' x 30'' table tops specify 2 bases specification codes for bases series sku L 83

84 standard seat height 84'' x 36'' Tables For use with 2161 connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 84'' x 36'' for use with round base $ 1236 $ 1339 $ $ for use with square base '' x 36'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C E 9 F 8 oak maple walnut white laminate corian - glacier white L description sku w d h weight specifications price round base mid height JC π '' dia. base $ '' column use with 84'' x 36'' table tops specify 2 bases square base mid height KC4 17π 17π 22π 32 17π'' sq. base '' column use with 84'' x 36'' table tops specify 2 bases specification codes for bases series sku L 84

85 conference seat height Conventional Lounge code 2100C 18" - 30" 29 " 29 " 5 yds. 85' 64 lbs '/1 457 mm mm 749 mm 752 mm 4.6 m 7.9 sqm 29.1 kg 1.0 cu Fully upholstered. Concealed legs *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. code 2105C 18" - 60" 29 " 29 " 9 yds. 125' 130 lbs '/1 457 mm mm 749 mm 752 mm 8.2 m 11.6 sqm 59.1 kg 1.93 cu Fully upholstered. Concealed leg. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. code 2107C 18" - 90" 29 " 29 " yds. 165' 193 lbs '/1 457 mm mm 749 mm 752 mm 11.2 m 15.3 sqm 87.7 kg 2.88 cu Fully upholstered. Concealed legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 85

86 conference seat height Freestanding Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 2140C 18 " 32 " 42 " 31" 52π" 15.1 yds. 150 lbs '/1 470 mm 816 mm 1080 mm 787 mm 1340 mm 13.8 m 68.2 kg 1.68 cu Standard Wall. Fully upholstered. Single seat with attached privacy walls on '' plinth base with four adjustable non-marring glides taht adjust out to 1 ''. Polished cast aluminum feet on privacy wall. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.5 yds. leather: 80.0 sq. ft. B) One fabric for wall yardage: 10.0 yds. code 2130C 18 " 32 " 42" 31" 52π" 15.1 yds. 150 lbs '/1 470 mm 816 mm 1067 mm 787 mm 1340 mm 13.8 m 68.2 kg 1.68 cu Angled Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.5 yds. leather: 80.0 sq. ft. B) One fabric for wall yardage: 10.0 yds. 1/05 * Please reference page 5 for COM approval procedures 86

87 conference seat height Freestanding Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 2145C 18 " 32 " 64 " 31" 52π" 20.8 yds. 246 lbs '/1 470 mm 816 mm 1638 mm 787 mm 1340 mm 19.0 m kg 2.50 cu Standard Wall. Fully upholstered. Two-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished cast aluminum feet on privacy wall. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 7.5 yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. code 2135C 18 " 32 " 64 31" 52π" 20.8 yds. 246 lbs '/1 470 mm 816 mm 1638 mm 787 mm 1340 mm 19.0 m kg 2.50 cu Angled Wall. Fully upholstered. Two-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 7.5 yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. 87

88 conference seat height Freestanding Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 2147C 18 " 32 " 94 " 31" 52π" yds. 316 lbs '/1 470 mm 816 mm 2400 mm 787 mm 1340 mm 24.9 m kg 3.60 cu Standard Wall. Fully upholstered. Three-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished cast aluminum feet on privacy wall. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: yds. leather: sq. ft. B) One fabric for wall yardage: 16.4 yds. code 2137C 18 " 32 " 94" 31" 52π" yds. 316 lbs '/1 470 mm 816 mm 2388 mm 787 mm 1340 mm 24.9 m kg 3.60 cu Angled Wall. Fully upholstered. Three-seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. Shipped assembled. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: yds. leather: sq. ft. B) One fabric for wall yardage: 16.4 yds. 88

89 conference seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 18 " 32 " 32 " 31" 52π" yds. 150 lbs '/1 470 mm 816 mm 819 mm 787 mm 1340 mm 10.3 m 68.2 kg 1.41 cu LC 2191RC Standard Wall. 2191LC Left Wall Facing. Fully upholstered. Single-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Standard Wall. 2191RC Right Wall Facing. Fully upholstered. Single-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.0 yds. leather: 70.0 sq. ft. B) One fabric for wall yardage: 6.5 yds. code 18 " 32 " 32" 31" 52π" yds. 150 lbs '/1 470 mm 816 mm 813 mm 787 mm 1340 mm 10.3 m 68.2 kg 1.41 cu LC Angled Wall. 2171LC Left Wall Facing. Fully upholstered. Single-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Angled Wall. 2171RC Right Wall Facing. Fully upholstered. Single-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 2171RC *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.0 yds. leather: 70.0 sq. ft. B) One fabric for wall yardage: 6.5 yds. 89

90 conference seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 18 " 32 " 62 " 31" 52π" 17.7 yds. 220 lbs '/1 470 mm 816 mm 1581 mm 787 mm 1340 mm 16.2 m kg 2.40 cu LC 2195RC Standard Wall. 2195LC Left Wall Facing. Fully upholstered. Two-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Standard Wall. 2195RC Right Wall Facing. Fully upholstered. Two-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 8.0 yds. leather: sq. ft. B) One fabric for wall yardage: 10.5 yds. code 18 " 32 " 62" 31" 52π" 17.7 yds. 220 lbs '/1 470 mm 816 mm 1575 mm 787 mm 1340 mm 16.2 m kg 2.40 cu LC Angled Wall. 2195LC Left Wall Facing. Fully upholstered. Two-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Angled Wall. 2195RC Right Wall Facing. Fully upholstered. Two-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 2175RC *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $120 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 8.0 yds. leather: sq. ft. B) One fabric for wall yardage: 10.5 yds. 90

91 conference seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 18 " 32 " 92 " 31" 52π" 23.8 yds. 289 lbs '/1 470 mm 816 mm 2343 mm 787 mm 1340 mm 21.8 m kg 3.50 cu LC Standard Wall. 2197LC Left Wall Facing. Fully upholstered. Three-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Standard Wall. 2197RC Right Wall Facing. Fully upholstered. Three-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Polished aluminum feet on walls. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G RC *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. code 18 " 32 " 92" 31" 52π" 23.8 yds. 289 lbs '/1 470 mm 816 mm 2337 mm 787 mm 1340 mm 21.8 m kg 3.50 cu LC Angled Wall. 2197LC Left Wall Facing. Fully upholstered. Three-seat module with attached back and left facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Angled Wall. 2197RC Right Wall Facing. Fully upholstered. Three-seat module with attached back and right facing privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 2177RC *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $150 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: yds. leather: sq. ft. B) One fabric for wall yardage: 14.0 yds. 91

92 conference seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 2190C 18 " 32 " 33" 33" 52π" 12.4 yds. 134 lbs '/1 470 mm 816 mm 838 mm 838 mm 1340 mm 11.3 m 60.9 kg 1.41 cu Corner Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Corner Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.5 yds. leather: 75.0 sq. ft. B) One fabric for wall yardage: 7.5 yds. code 2160C 18 " 32 " 30" 31" 52π" 8.75 yds. 141 lbs '/1 470 mm 816 mm 762 mm 787 mm 1340 mm 8.0 m 64.1 kg 1.41 cu Connecting Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Connecting Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.75 yds. leather: sq. ft. B) One fabric for wall yardage: 3.5 yds. 92

93 conference seat height Modular Privacy Lounge Seat Back Seat Height Height W D Wall Height Fabric *Leather Weight Cubes/Qty code 2161C 18 " 32 " 36" 31" 52π" 8.75 yds. 141 lbs '/1 470 mm 816 mm 914 mm 787 mm 1340 mm 11.3 m 64.1 kg 1.41 cu Connecting Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Connecting Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.75 yds. leather: sq. ft. B) One fabric for wall yardage: 3.5 yds. code 2165C 18 " 32 " 42" 31" 52π" 8.75 yds. 158 lbs '/1 470 mm 816 mm 838 mm 787 mm 1340 mm 8.0 m 71.8 kg 2.50 cu Connecting Wall. Fully upholstered. Single seat with attached privacy walls on 1 '' plinth base with four adjustable non-marring glides. Standard with welt around wall perimeter. All necessary ganging brackets are included and pre-installed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Connecting Wall is used in conjunction with other modules to create shaped configurations. May not be used as a freestanding unit or at the end of a modular configuration. *Leather is approved for use only on seat and seat back. When specifying leather seat with fabric wall, use the yardage/square footage provided below. Leather is not approved for use on walls. When using a combination of fabrics or leathers, the following yardage must be used and a $110 net upcharge per unit applies. A) One fabric or leather for seat and seat back yardage: 5.75 yds. leather: sq. ft. B) One fabric for wall yardage: 3.5 yds. 93

94 conference seat height Code + Quiet Tables A limited offering of Quiet Tables is available to work in conjunction with Code seating. They were designed specifically to create a banquette configuration for dining or work. The tables may be used within a modular configuration or with freestanding privacy units. Angled walls are recommended in these settings for maximum seating access. Bases are brushed stainless steel. Surface Selection Oak Veneer Order Code - C Rift Cut Walnut Veneer Order Code - 9 Quarter Cut, Slip Matched Maple Veneer Order Code - E Quarter Cut, Slip Matched Laminate Order Code - F Brite White Corian Order Code - 8 Glacier White Standard Finish Standard Finish Standard Finish Standard Finish 611 Formica Edge Profiles Wood Laminate Corian Power Module The Power Module is a simple and clean way of bringing power and USB to the worksurface. The Power Module installs flush to the worksurface and provides one grounded outlet and one amp USB duplex, ideal for charging tablets or other USB friendly devices. Power Module is UL approved with spill-proof technology and a 15 amp 72'' cord. This Power Module is available for Code + Quiet Tables only. One Power Module is provided in the center of the table when power is specified. Max. Worksurface Thickness 1.5'' Ω'' 3'' 3 '' 3Ω'' 2Ω'' 4'' 94

95 conference seat height Modular Privacy Lounge Conference Seat Height 29'' For Use with Modular Privacy Lounge 96'' 102 '' 2190C 2160C 2190C 2190C 2161C 2190C 95'' 30'' x 54'' 125'' 2175LC 2175RC 2177LC 36'' x 84'' 2177RC 2'' 2'' 2'' 2'' Code 2160C Connecting Wall - use 30'' Table Table has a 2'' clearance on each side Code 2161C Connecting Wall - use 36'' Table Table has a 2'' clearance on each side For Use with Freestanding Privacy Lounge 64'' 94'' 2135C 2137C 54'' 84'' 95

96 conference seat height 54'' x 30'' Tables For use with 2160C connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 54'' x 30'' for use with round base $ 824 $ 927 $ $ for use with square base '' x 30'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C E 9 F 8 oak maple walnut white laminate corian - glacier white L description sku w d h weight specifications price round base conference height NC '' dia. base $ '' column use with 54'' x 30'' table tops specify 2 bases square base conference height OC9 17π 17π π'' sq. base '' column use with 54'' x 30'' table tops specify 2 bases specification codes for bases series sku L 96

97 conference seat height 54'' x 36'' Tables For use with 2161C connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 54'' x 36'' for use with round base $ 927 $ 1030 $ $ for use with square base '' x 36'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C E 9 F 8 oak maple walnut white laminate corian - glacier white L description sku w d h weight specifications price round base conference height NC '' dia. base $ '' column use with 54'' x 36'' table tops specify 2 bases square base conference height OC9 17π 17π π'' sq. base '' column use with 54'' x 36'' table tops specify 2 bases specification codes for bases series sku L 97

98 conference seat height 84'' x 30'' Tables For use with 2160C connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 84'' x 30'' for use with round base $ 1133 $ 1236 $ $ for use with square base '' x 30'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C E 9 F 8 oak maple walnut white laminate corian - glacier white L description sku w d h weight specifications price round base conference height NC '' dia. base $ '' column use with 84'' x 30'' table tops specify 2 bases square base conference height OC9 17π 17π π'' sq. base '' column use with 84'' x 30'' table tops specify 2 bases specification codes for bases series sku L 98

99 conference seat height 84'' x 36'' Tables For use with 2161C connecting wall in modular units or with freestanding privacy units. Tops and bases specified separately oak sku l w specifications maple walnut laminate glass corian 84'' x 36'' for use with round base $ 1236 $ 1339 $ $ for use with square base '' x 36'' for use with round base, with power module power module for use with square base, with power module specification codes for tops series sku veneer wood finish C E 9 F 8 oak maple walnut white laminate corian - glacier white L description sku w d h weight specifications price round base conference height NC '' dia. base $ '' column use with 84'' x 36'' table tops specify 2 bases square base conference height OC9 17π 17π π'' sq. base '' column use with 84'' x 36'' table tops specify 2 bases specification codes for bases series sku L 99

100 lounge -- colours Colours Seating System Specification Guide Colours is a modular seating product comprised of 12 unique modules which may be used interchangeably to create an unlimited number of configurations. To select the modules that are appropriate for your application use the guide below. Colours is fully upholstered with saddle stitch detailing. Fabric and vinyl applications will be railroaded. Leather will incorporate saddle stitch seams on the top panel. When submitting COM, please provide a continous roll of fabric in the total yardage for the configuration(s). Non-marring glides with vinyl sleeves prevent the units from sliding on smooth surfaces. GREENGUARD certified. Due to the organic shapes, the dimensions can vary depending on the orientation of the product. Therefore, a maximum dimension is provided in the price list information. The 2D models provide dimensioned drawings of Colours. Consult Bernhardtdesign.com for a complete library of 2D, 3D and Revit models. Connecting Modules Non-Connecting Modules Flat Panel Contact your local sales representative or the Bernhardt Design corporate office for specification assistance. Non-Connecting Modules Colours Colours Colours Colours Connecting Modules Colours Colours Colours Colours Colours Colours Colours Colours /15 100

101 lounge -- colours Colours - Fabric and Vinyl Application Fabric and vinyl covers incorporate seamless top panels. Fabric will be Railroaded on the top panel for all skus. Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. Top Panel Railroad Colours - Leather Application Leather covers incorporate saddle stitch seams on the top panel. See diagrams below, noting seam locations for each sku. Seams Colours Colours Colours Colours Connecting Modules Colours Colours Colours Colours Colours Colours Colours Colours /15 101

102 colors configurations '' Description 4835 Colours Colours '' Colours Colours '' '' '' 4837 Colours Colours Colours '' Colours Colours Colours Colours '' 121'' Colours Colours Colours Colours Colours Colours '' '' 06/15 102

103 colours configurations Description Colours Colours Colours Colours '' '' Colours Colours Colours Colours Colours Colours Colours 6 173'' '' 8 81 '' 4836 Colours Colours Colours Colours Colours 6 230'' Colours '' 4834 Colours Colours Colours Colours Colours Colours Colours Colours '' 06/15 103

104 lounge -- modular Seat Height Max Dim. W D H Fabric Leather Weight Cubes/Qty colours " 59 " 33 " 59 " 16 " 3.75 yds. 70.0' 70 lbs '/1 419 mm 1505 mm 851 mm 1505 mm 419 mm 3.4 m 6.5 sqm 31.8 kg 1.93 cu Non-connecting module. Freestanding only. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for top panel yardage: 2.0 yds. B) One fabric or leather for body yardage: 2.75 yds. leather: 35.0 sq. ft. leather: 45.0 sq. ft. colours " 32 " 32 " 31 " 16 " 2.5 yds. 43.0' 40 lbs '/1 419 mm 835 mm 835 mm 803 mm 419 mm 2.3 m 4.0 sqm 18.2 kg.46 cu Non-connecting module. Freestanding only. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 1.25 yds. B) One fabric or leather for body yardage: 1.6 yds. leather: sq. ft. leather: 25.0 sq. ft. colours " 43π" 43π" 38Ω" 16 " 3.5 yds. 56.7' 66 lbs '/1 419 mm 1111 mm 1111 mm 975 mm 419 mm 3.2 m 5.3 sqm 30.0 kg.86 cu Non-connecting module. Freestanding only. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 1.55 yds. B) One fabric or leather for body yardage: 2.1 yds. leather: 30.0 sq. ft. leather: 34.0 sq. ft. 06/15 104

105 lounge -- modular Seat Height Max Dim. W D H Fabric Leather Weight Cubes/Qty colours " 61 " 61 " 45 " 16 " 5.75 yds. 95.0' 80 lbs '/1 419 mm 1562 mm 1562 mm 1165 mm 419 mm 5.3 m 8.8 sqm 36.4 kg 2.28 cu Non-connecting module. Freestanding only. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 2.0 yds. B) One fabric or leather for body yardage: 3.75 yds. leather: 35.0 sq. ft. leather: 60.0 sq. ft. colours " 52π" 33" 52π" 16 " 3.6 yds. 65.0' 51 lbs '/1 419 mm 1340 mm 838 mm 1340 mm 419 mm 419 mm 6.0 sqm 23.2 kg.66 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 1.75 yds. B) One fabric or leather for body yardage: 2.6 yds. leather: 30.0 sq. ft. leather: 40.0 sq. ft. colours " 52π" 33" 52π" 16 " 3.6 yds. 65.0' 51 lbs '/1 419 mm 1340 mm 838 mm 1340 mm 419 mm 3.3 m 6.0 sqm 23.2 kg.66 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 1.75 yds. B) One fabric or leather for body yardage: 2.6 yds. leather: 30.0 sq. ft. leather: 40.0 sq. ft. 06/15 105

106 lounge -- modular Seat Height Max Dim. W D h Fabric Leather Weight Cubes/Qty colours " 48 " 48 " 33π" 16 " 3.75 yds. 70.0' 73 lbs '/1 419 mm 1241 mm 1241 mm 857 mm 419 mm 3.4 m 6.5 sqm 33.2 kg 1.10 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 1.75 yds. leather: 30.0 sq. ft. B) One fabric or leather for body yardage: 2.75 yds. leather: 40.0 sq. ft. colours " 54 " 50Ω" 33" 16 " 4.1 yds. 70.0' 51 lbs '/1 419 mm 1387 mm 1280 mm 838 mm 419 mm 3.7 m 6.5 sqm 23.2 kg.66 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 1.75 yds. leather: 30.0 sq. ft. B) One fabric or leather for body yardage: 2.65 yds. leather: 40.0 sq. ft. colours " 59 " 59Ω" 45π" 16 " 5.25 yds. 90.0' 81 lbs '/1 419 mm 1514 mm 1508 mm 1162 mm 419 mm 4.8 m 8.4 sqm 36.8 kg 2.84 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 2.0 yds. leather: 32.0 sq. ft. B) One fabric or leather for body yardage: 3.6 yds. leather: 65.0 sq. ft. 06/15 106

107 lounge -- modular Seat Height Max Dim. W D H Fabric Leather Weight Cubes/Qty colours " 66π" 65 " 42π" 16 " 5.1 yds. 85.0' 88 lbs '/1 419 mm 1695 mm 1667 mm 1086 mm 419 mm 4.7 m 7.9 sqm 40.0 kg 2.28 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 2.25 yds. B) One fabric or leather for body yardage: 3.0 yds. leather: 40.0 sq. ft. leather: 50.0 sq. ft. colours " 42 " 38 " 37Ω" 16 " 3.5 yds. 57.0' 65 lbs '/1 419 mm 1089 mm 978 mm 949 mm 419 mm 3.2 m 5.3 sqm 29.5 kg.86 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 1.5 yds. B) One fabric or leather for body yardage: 2.0 yds. leather: 25.0 sq. ft. leather: 32.0 sq. ft. colours " 70π" 70π" 41 " 16 " 5.5 yds. 90.0' 85 lbs '/1 419 mm 1797 mm 1797 mm 1048 mm 419 mm 5.0 m 8.4 sqm 38.6 kg 2.28 cu Connecting module. Fully upholstered with saddle stitch detail. Fabric Railroaded. Leather has seamed top. When submitting COM, please provide a continuous roll of fabric in the total yardage for the configuration(s). Striped or plaid fabrics and certain patterns with distinct direction are not suitable for application. Solids, textures and leathers are recommended. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for top panel yardage: 2.4 yds. B) One fabric or leather for body yardage: 3.5 yds. leather: 40.0 sq. ft. leather: 50.0 sq. ft. 06/15 107

108 lounge coterie " - 32 " 31" 27Ω" 4.0 yds. 63.0' 53 lbs '/1 394 mm mm 787 mm 695 mm 3.7 m 5.9 sqm 24.0 kg 1.0 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Welt standard along base. Approved for GSA. Contract GS-28F-7040G cp.1 16Ω" - 27" 33 " 28 " 3.7 yds. 50.0' 45 lbs '/1 416 mm mm 845 mm 724 mm 3.4 m 4.6 sqm 20.4 kg.62 cu. COM COL BERNHARDT TEXTILES FELT FELT Polished Stainless Steel 6501B Brushed Stainless Steel Quilted seat and back. A loop stitch cording traces the perimeter of the chair. Contrasting thread options are available. For thread color options reference CP.1/Stitching on Bernhardtdesign.com. All Bernhardt Textiles leathers are suitable for application on this product. Firm, non-flexible leathers not recommended. *All COM FELT/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. Available in leather, leather alternatives, suede or felt only 15 " - 26π" 22" 15 " 2.2 yds. 27.0' 31 lbs '/1 391 mm mm 559 mm 403 mm 2.0 m 2.5 sqm 14.1 kg.32 cu. COM COL BERNHARDT TEXTILES FELT FELT Polished Stainess Steel 6503B - Brushed Stainess Steel Ottoman. Quilted seat. Base dimensions: w23 '' d18π'' h13 ''. A loop stitch cording traces the perimeter of the ottoman. Contrasting thread options are available. For thread color options reference CP.1/Stitching on Bernhardtdesign.com. All Bernhardt Textiles leathers are suitable for application on this product. Firm, non-flexible leathers not recommended. *All COM FELT/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. Available in leather, leather alternatives, suede or felt only 16Ω" - 56 " 26 " 16Ω" 3.6 yds. 49.0' 60 lbs '/1 416 mm mm 673 mm 416 mm 3.3 m 4.6 sqm 27.3 kg.48 cu. COM COL BERNHARDT TEXTILES FELT FELT Polished Stainess Steel 6505B - Brushed Stainess Steel Two Seat Bench. Quilted seat. Base dimensions: w50 '' d18 '' h13 ''. A loop stitch cording traces the perimeter of the bench. Contrasting thread options are available. For thread color options reference CP.1/Stitching on Bernhardtdesign.com. All Bernhardt Textiles leathers are suitable for application on this product. Firm, non-flexible leathers not recommended. *All COM FELT/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. Available in leather, leather alternatives, suede or felt only 108

109 lounge cp.2 16" - 26 " 33 " 28π" 3.75 yds. 50.0' 45 lbs '/1 406 mm mm 841 mm 730 mm 3.4 m 4.6 sqm 20.4 kg.62 cu Polished Stainless Steel 6502B Brushed Stainless Steel Upholstered seat and back. Small horizontal or two-way patterns are not recommended. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 15 " - 26 " 22" 15 " 2.2 yds. 27.0' 31 lbs '/1 391 mm mm 559 mm 391 mm 2.0 m 2.5 sqm 14.1 kg.32 cu Polished Stainess Steel 6504B - Brushed Stainess Steel Ottoman. Upholstered seat. Base dimensions: w23 '' d18π'' h13 ''. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 16 " - 56 " 26 " 16 " 3.6 yds. 49.0' 60 lbs '/1 419 mm mm 673 mm 419 mm 3.3 m 4.6 sqm 27.3 kg.48 cu Polished Stainess Steel 6506B - Brushed Stainess Steel Two Seat Bench. Upholstered seat. Base dimensions: w50 '' d18 '' h13 ''. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. edge " - 26 " 31 " 28 " 2.3 yds. 34.0' 50 lbs '/1 432 mm mm 800 mm 724 mm 2.1 m 3.2 sqm 22.6 kg 1.0 cu Upholstered seat and back. Walnut frame with veneered back. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 109

110 lounge entrada " 24" 29 " 30 " 29 " 6.0 yds ' 81 lbs '/RP 445 mm 610 mm 749 mm 775 mm 749 mm 5.5 m 12.0 sqm 36.7 kg.44 cu Fully upholstered. Maple base. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat cushion, inside and outside arms, front panel, inside and outside back yardage: 5.7 yds. leather: sq. ft. B) One fabric or leather for back pillow yardage: 0.7 yds. leather: 12.6 sq. ft. entrada " 24" 55" 31 " 29 " 11.0 yds ' 84 lbs '/RP 445 mm 610 mm 1397 mm 800 mm 749 mm 10.1 m 14.4 sqm 35.0 kg 1.08 cu Fully upholstered. Maple base. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat cushion, inside and outside arms, front panel, inside and outside back yardage: 9.5 yds. leather: sq. ft. B) One fabric or leather for back pillow yardage: 1.7 yds. leather: 35.0 sq. ft. Please specify the fabric or leather application by designating the appropriate letter on the purchase order entrada " 24" 78" 31 " 29 " 13.5 yds ' 145 lbs '/RP 445 mm 610 mm 1981 mm 800 mm 749 mm 12.3 m 24.9 sqm 65.8 kg 1.53 cu Fully upholstered. Maple base. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat cushion, inside and outside arms, front panel, inside and outside back yardage: 12.0 yds. leather: sq. ft. B) One fabric or leather for back pillow yardage: 2.0 yds. leather: 55.0 sq. ft. 110

111 lounge gaia " 25π" 31 " 33" 29 " 7.3 yds ' 75 lbs '/1 445 mm 654 mm 790 mm 838 mm 749 mm 6.7 m 13.4 sqm 34.0 kg 1.0 cu High Arm. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 4.75 yds. leather: 84.0 sq. ft. B) One fabric or leather for remainder of product - shell yardage: 4.5 yds. leather: 78.0 sq. ft. gaia " 25π" 59 " 33" 29 " 13.5 yds ' 135 lbs '/1 445 mm 654 mm 1502 mm 838 mm 749 mm 12.3 m 25.1 sqm 61.2 kg 1.93 cu High Arm. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 7.5 yds. leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 6.1 yds. leather: sq. ft. gaia " 25π" 87 " 33" 29 " 17.6 yds ' 150 lbs '/1 445 mm 654 mm 2216 mm 838 mm 749 mm 16.1 m 31.2 sqm 67.0 kg 2.88 cu High Arm. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 11.5 yds. leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 8.1 yds. leather: sq. ft. 111

112 lounge gaia " 17 " 31 " 33" 29 " 7.3 yds ' 75 lbs '/1 445 mm 445 mm 791 mm 838 mm 749 mm 6.7 m 12.3 sqm 34.0 kg 1.0 cu Low Arm. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 4.75 yds. leather: 84.0 sq. ft. B) One fabric or leather for remainder of product - shell yardage: 4.0 yds. leather: 78.0 sq. ft. gaia " 17 " 59 " 33" 29 " 13.5 yds ' 135 lbs '/1 445 mm 445 mm 1502 mm 838 mm 749 mm 12.3 m 25.1 sqm 61.2 kg 1.93 cu Low Arm. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 7.5 yds. leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 6.1 yds. leather: sq. ft. gaia " 17 " 87 " 33" 29 " 17.6 yds ' 150 lbs '/1 445 mm 445 mm 2216 mm 838 mm 749 mm 16.1 m 31.2 sqm 67.0 kg 2.88 cu Low Arm. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 11.5 yds. leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 8.1 yds. leather: sq. ft. 112

113 lounge gaia 17 " 25π" 57Ω" 33" 29 " 12.8 yds ' 135 lbs '/1 445 mm 654 mm 1457 mm 838 mm 749 mm 11.7 m 23.4 sqm 61.2 kg 1.93 cu High Arm Left Facing. Two seat unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G High Arm Right Facing. Two seat unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G When using a combination of fabrics or leathers the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 8.0 yds leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 5.6 yds leather: 90.0 sq. ft. gaia 17 " 25π" 85Ω" 33" 29 " 16.6 yds ' 150 lbs '/1 445 mm 654 mm 2169 mm 838 mm 749 mm 15.2 m 29.5 sqm 67.0 kg 2.88 cu High Arm Left Facing. Three seat unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G High Arm Right Facing. Three Seat Unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G When using a combination of fabrics or leathers the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 11.5 yds leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 7.1 yds leather: sq. ft. gaia 17 " 17 " 57Ω" 33" 29 " 12.8 yds ' 135 lbs '/1 445 mm 445 mm 1457 mm 838 mm 749 mm 11.7 m 23.4 sqm 61.2 kg 1.93 cu Low Arm Left Facing. Two seat unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G Low Arm Right Facing. Two seat unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G When using a combination of fabrics or leathers the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 8.0 yds leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 5.6 yds leather: 90.0 sq. ft. Please specify the fabric or leather application by designating the appropriate letter on the purchase orde. 113

114 lounge gaia 17 " 17 " 85Ω" 33" 29 " 16.6 yds ' 150 lbs '/1 445 mm 445 mm 2169 mm 838 mm 749 mm 15.2 m 29.5 sqm 67.0 kg 2.88 cu Low Arm Left Facing. Three seat unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G Low Arm Right Facing. Three seat unit. Polished aluminum base with levelers. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G When using a combination of fabrics or leathers for the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 11.5 yds leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 7.1 yds leather: sq. ft. gaia " - 33π" 33" 29 " 7.5 yds ' 75 lbs '/1 445 mm mm 838 mm 749 mm 6.9 m 13.4 sqm 34.0 kg 1.0 cu Corner Unit. Polished aluminum base with levelers. Connecting bracket. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric. A) One fabric or leather for seat cushion, back cushion and front panel yardage: 5.75 yds. leather: sq. ft. B) One fabric or leather for remainder of product - shell yardage: 3.0 yds. leather: 48.0 sq. ft. gaia 2290P " 6" 15" 1.0 yd. 15.0' mm 152 mm 381 mm.9 m 1.4 sqm Accent Pillow. Blown fiber filled with welt. Use with 2205, 2207, 2305, 2307, 2215, 2225, 2217, 2227, 2315, 2325, 2317, and *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Shipped with lounge. Approved for GSA. Contract GS-28F-7040G. gaia 2291P - - 6" 21" 6" 1.0 yd. 15.0' mm 533 mm 152 mm.9 m 1.4 sqm Accent Bolster. HR15 foam with welt. Use with 2205, 2207, 2305, 2307, 2215, 2225, 2217, 2227, 2315, 2325, 2317, and *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Shipped with lounge. Approved for GSA. Contract GS-28F-7040G. 114

115 lounge graphica " 26" 34" 32" 30 " 5.5 yds ' 85 lbs. 21.0'/RP 445 mm 660 mm 864 mm 813 mm 775 mm 5.1 m 10.2 sqm 36.0 kg.59 cu Fully upholstered. Maple solids with brushed nickel ferrules. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. graphica " 26" 65" 32" 30 " 9.5 yds ' 110 lbs '/RP 445 mm 660 mm 1651 mm 813 mm 775 mm 8.7 m 13.5 sqm 49.9 kg 1.30 cu Fully upholstered. Maple solids with brushed nickel ferrules. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. graphica " 26" 80" 32" 30 " 11.5 yds ' 135 lbs '/RP 445 mm 660 mm 2032 mm 813 mm 775 mm 10.5 m 17.5 sqm 61.2 kg 1.60 cu Fully upholstered. Maple solids with brushed nickel ferrules. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. harper π" 24 " 29" 31π" 27" ' 47 lbs '/1 400 mm 622 mm 737 mm 806 mm 686 mm sqm 21.3 kg 1.0 cu. COL 3077 GREENGUARD Certified Cherry frame with maple tapered spindles. Available in a natural clear coat finish only. Flange stitch seat. Approved for GSA. Contract GS-28F-7040G. Available in leather or suede only 115

116 lounge -- modular Item Item is a modular seating product that creates freedesigns. The Item modules twist, rise and fall in their design creating a final assembly sculptured from both the plan and elevation views. Item is offered in 10 different modules that range in shape and heights. All necessary ganging brackets are included and preinstalled. Fabric on corner module will be railroaded. If modules are used in a configuration with the corner module, specify fabric railroaded. Variations in heights within the item modular group makes it necessary to use only the modules with corresponding heights together. Modules cannot be mated to either A or D sides. Approved for GSA. Contract GS-28F-7040G. Illustration showing ONLY the low lounge modules for Item. A - 25Ω''h B - 29 ''h D -19 ''h Item s change in height adds to the palette of creativity that already exists within the sectional group. Item is a modular seating product that creates freefloating seating designs. The Item modules twist, rise and fall in their design creating a final assembly sculptured from both the plan and elevation views. Item is offered in 10 different modules that range in shape and heights. Fabric on corner module will be railroaded. If modules are used in a configuration with the corner module, specify fabric railroaded. Shaded modules show the tall and transitional modules. Note: Tall and low modules must be paired with a unit with a matching height. The C height will only fit to other C height modules as the B height will only work with corresponding B height units. Illustration showing both the low and the taller transition modules for Item. A - 25Ω'' B - 29 '' C - 31 '' D - 19 '' 1 Plan View ISO View Description (1) 5900L Left Arm Module (1) 5900R Right Arm Module 2 76 ''w x 42Ω''d (1) 5900L Left Arm Module (1) 5901CL Center Low Module (1) 5900R Right Arm Module 105 ''w x 42Ω''d 3 (1) 5900L Left Arm Module (3) 5902NW Narrow Back Wedge 150 ''w x 67''d 116

117 lounge -- modular 4 Plan View ISO View Description (1) 5900L Left Arm Module (4) 5902WW Wide Wedge Module (1) 5900R Right Arm Module 197 ''w x77 ''d 5 (1) 5900L Left Arm Module (1) 5901CL Center Low Module (1) 5904R Run-off Right Module 127π''w x 47π''d 6 (1) 5900L Left Arm Module (1) 5901CL Center Low Module (1) 5905 Corner Module (1) 5901CL Center Low Module (1) 5900R Right Arm Module 148π''w x 37 ''d 7 (1) 5900L Left Arm Module (2) 5902NW Narrow Back Wedge (1) 5904R Run-off Right Module 148 ''w x 55Ω''d 8 (1) 5900L Left Corner Module (1) 5903LW Low Left Wedge Module (1) 5901CH Center High Module (1) 5903RW Low Right Wedge Module (2) 5902NW Narrow Back Wedge Module (1) 5904R Run-Off Right Module 238 ''w x 91π''d 9 (1) 5900L Left Corner Module (1) 5901CL Center Low Module (1) 5903RW Low Left Wedge Module (1) 5903RW Low Right Wedge Module (1) 5900R Right Corner Module 169 ''w x 55π''d 10 (1) 5900L Left Corner Module (1) 5903LW Low Left Wedge Module (1) 5901CH Center High Module (1) 5903RW Low Right Wedge Module (1) 5900R Right Corner Module 171 ''w x 55π''d 117

118 lounge -- modular item 5900L 16π" 25Ω'' 38" 42Ω" 29 " 5.8 yds ' 105 lbs '/1 425 mm 645 mm 965 mm 1076 mm 740 mm 5.3 m 9.4 sqm 47.6 kg.91 cu Left Arm Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item 5900R 16π" 25Ω'' 38" 42Ω" 29 " 5.8 yds ' 105 lbs '/1 425 mm 645 mm 965 mm 1076 mm 740 mm 5.3 m 9.4 sqm 47.6 kg.91 cu Right Arm Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item 5901CL 16π" - 29 " 37 " 29 " 4.8 yds. 87.0' 85 lbs '/1 425 mm mm 946 mm 740 mm 4.4 m 8.1 sqm 38.5 kg.91 cu Center Low Module Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item 5902WW 16π" - 38" 36 " 29 " 4.8 yds. 87.0' 85 lbs '/1 425 mm mm 930 mm 740 mm 4.4 m 8.1 sqm 38.5 kg.91 cu Wide Back Wedge Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item 5902NW 16π" - 37 " 35π" 29 " 4.5 yds. 87.0' 75 lbs '/1 425 mm mm 908 mm 740 mm 4.2 m 8.1 sqm 38.5 kg.91 cu Narrow Back Wedge Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item 5904L 16π" - 64 " 36 " 29 " 7.5 yds ' 121 lbs '/1 425 mm mm 918 mm 740 mm 6.9 m 10.8 sqm 54.9 kg 1.93 cu Run-off Left Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. 118

119 lounge -- transitional / tall modular item 5904R 16π" - 64 " 36 " 29 " 7.5 yds ' 121 lbs /1 425 mm mm 918 mm 740 mm 6.9 m 10.8 sqm 54.9 kg 1.93 cu Run-off Right Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item π" - 47 " 47 " 29 " 7.5 yds ' 195 lbs '/1 425 mm mm 1200 mm 740 mm 6.9 m 11.1 sqm 88.0 kg 2.84 cu Corner Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Fabric railroaded. Approved for GSA. Contract GS-28F-7040G. item 5901CH 16π" - 38" 37 " 31 " 5.0 yds. 88.0' 85 lbs '/1 425 mm mm 946 mm 790 mm 4.6 m 8.2 sqm 38.5 kg.91 cu Center High Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item 5903LW 16π" - 38" 37 " 31 " 4.7 yds. 87.0' 85 lbs '/1 425 mm mm 946 mm 790 mm 4.3 m 8.1 sqm 38.5 kg.91 cu Low Left - High Right Wedge Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. item 5903RW 16π" - 38" 36 " 31 " 4.7 yds. 87.0' 85 lbs '/1 425 mm mm 930 mm 790 mm 4.3 m 8.1 sqm 38.5 kg.91 cu Low Right - High Left Wedge Module. Fully upholstered. Ganging brackets included. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Specify fabric railroaded when used with Item 5905 corner module. Approved for GSA. Contract GS-28F-7040G. 119

120 lounge league " 23 " 37Ω" 32 " 27 " 9.5 yds ' 106 lbs '/1 419 mm 616 mm 949 mm 816 mm 689 mm 8.7 m 12.9 sqm 48.1 kg.91 cu Fully upholstered. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. league 8312B 16 " 23 " 37Ω" 32 " 27 " 9.5 yds ' 106 lbs '/1 419 mm 616 mm 949 mm 816 mm 689 mm 8.7 m 12.9 sqm 48.1 kg.91 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. league " 23 " 66π" 33 " 27 " 12.5 yds ' 125 lbs '/1 419 mm 616 mm 1695 mm 841 mm 689 mm 11.4 m 17.1 sqm 56.8 kg 2.28 cu Fully upholstered. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. league 8315B 16 " 23 " 66π" 33 " 27 " 12.5 yds ' 125 lbs '/1 419 mm 616 mm 1695 mm 841 mm 689 mm 11.4 m 17.1 sqm 56.8 kg 2.28 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. league " 23 " 95π" 33 " 27 " 17.0 yds ' 145 lbs '/1 419 mm 616 mm 2432 mm 841 mm 689 mm 15.5 m 23.2 sqm 65.8 kg 2.77 cu Fully upholstered. Brushed nickel base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 120

121 lounge league 8317B 16 " 23 " 95π" 33 " 27 " 17.0 yds ' 145 lbs '/1 419 mm 616 mm 2432 mm 841 mm 689 mm 15.5 m 23.2 sqm 65.8 kg 2.77 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application.approved for GSA. Contract GS-28F-7040G. lilt 15" - 28 " 28 " 27 " 2.75 yds. 42.0' 41 lbs '/1 381 mm mm 724 mm 699 mm 2.5 m 3.9 sqm 18.6 kg 1.0 cu Polished Stainless Steel 2512B Brushed Stainless Steel Upholstered seat and back. Saddle-stitch seam between seat and seat back. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. loft " - 27 " 29 " 27π" lbs '/1 381 mm mm 745 mm 705 mm kg 1.0 cu. List Price 2351 Walnut. Available in natural oiled LV8 finish only. Approved for GSA. Contract GS-28F-7040G. madeleine " 27" 31π" 29" 30" 5.3 yds. 83.3' 53.0 lbs /1' 457 mm 686 mm 806 mm 737 mm 762 mm 4.8 m 7.7 sqm 24.0 kg 1.0 cu Fully upholstered with wood trim. Maple solids. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 121

122 lounge manhasset " 27" 32 " 31" 35" 5.3 yds ' 64 lbs '/RP 508 mm 686 mm 826 mm 787 mm 889 mm 4.8 m 9.6 sqm 29.0 kg.64 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. manhasset " 27" 60" 30 " 35" 10.0 yds ' 128 lbs '/RP 508 mm 686 mm 1524 mm 775 mm 889 mm 9.1 m 13.5 sqm 58.0 kg 1.38 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. manhasset " 27" 80" 30 " 35" 12.0 yds ' 130 lbs '/RP 508 mm 686 mm 2032 mm 775 mm 889 mm 11.0 m 18.5 sqm 58.9 kg 1.84 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. mesa " 24 " 28 " " 4.5 yds. 90.0' 53 lbs '/RP 470 mm 616 mm 724 mm 724 mm 851 mm 4.2 m 8.4 sqm 42.1 kg.49 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Standard with welt around bottom only. Approved for GSA. Contract GS-28F-7040G. 122

123 lounge milix " 26 " 35" 34 " 30 " 8.5 yds. 180' 99 lbs '/1 422 mm 667 mm 889 mm 870 mm 765 mm 7.8 m 16.7 sqm 44.9 kg 1.0 cu Fully upholstered. Brushed nickel sled base. Fabrics with more than 10% stretch are not suitable. Fabrics cannot be railroaded. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 4.0 yds. leather: 56.0 sq. ft. B) One fabric or leather for arms, outside back and front panel yardage: 6.0 yds. leather: sq. ft. milix " 26 " 71 " 35π" 30 " 13.0 yds ' 160 lbs '/1 422 mm 667 mm 1816 mm 908 mm 765 mm 11.9 m 27.9 sqm 72.6 kg 2.28 cu Fully upholstered. Brushed nickel sled base. Fabrics with more than 10% stretch are not suitable. Fabrics cannot be railroaded. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 7.0 yds. leather: sq. ft. B) One fabric or leather for arms, outside back and front panel yardage: 9.0 yds. leather: sq. ft. milix " 26 " 95π" 35π" 30 " 18.0 yds ' 205 lbs '/1 422 mm 667 mm 2432 mm 908 mm 765 mm 16.5 m 35.3 sqm kg 2.77 cu Fully upholstered. Brushed nickel sled base. Fabrics with more than 10% stretch are not suitable. Fabrics cannot be railroaded. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 9.0 yds. leather: sq. ft. B) One fabric or leather for arms, outside back and front panel yardage: 11.5 yds. leather: sq. ft. 123

124 lounge mills π" 27Ω" 33 " 30 " 27Ω" 7.0 yds ' 91 lbs '/1 451 mm 695 mm 851 mm 775 mm 695 mm 6.4 m 10.7 sqm 41.4 kg 1.0 cu Walnut base with a bronze metal ring on legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. Please specify the application by designating the appropriate letter on the purchase order. A) One fabric or leather for seat cushion, inside back cushion and inside arm yardage: 3.25 yds. leather: 55.0 sq. ft. B) One fabric or leather for outer shell: back, sides, top and front rim, front bottom rail yardage: 3.9 yds. leather: 59.0 sq. ft. mills 17π" 27Ω" 34 "* 33 "* 29 "* 7.0 yds ' 91 lbs '/1 6482LTB, LTS, LTW 451 mm 695 mm 879 mm* 845 mm* 749 mm* 6.4 m 10.7 sqm 41.4 kg 1.0 cu RTB, RTS, RTW 6482LTB Tablet Arm, Left Facing - Brown 6482RTB Tablet Arm, Right Facing - Brown 6482LTS Tablet Arm, Left Facing - Sand 6482RTS Tablet Arm, Right Facing - Sand 6482LTW Tablet Arm, Left Facing - White 6482RTW Tablet Arm, Right Facing - White Tablet Arm. Oval tablet 15"w, 11"d. 360 rotation around center of arm. Available in Brown, Sand and White powdercoat finish. Tablet is designed for light weight use and is not recommended for high use areas. *Dimensions include tablet arm in user position. Walnut base with a bronze metal ring on legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. Please specify the application by designating the appropriate letter on the purchase order. A) One fabric or leather for seat cushion, inside back cushion and inside arm yardage: 3.25 yds. leather: 55.0 sq. ft. B) One fabric or leather for outer shell: back, sides, top and front rim, front bottom rail yardage: 3.9 yds. leather: 59.0 sq. ft. mills π" 27Ω" 72" 30 " 27Ω" 9.5 yds ' 161 lbs '/1 451 mm 695 mm 1829 mm 775 mm 695 mm 8.7 m 14.9 sqm 73.2 kg 2.84 cu Walnut base with a bronze metal ring on legs. Fully upholstered. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. Please specify the application by designating the appropriate letter on the purchase order. A) One fabric or leather for seat cushion, inside back cushion and inside arm yardage: 4.5 yds. leather: 80.0 sq. ft. B) One fabric or leather for outer shell: back, sides, top and front rim, front bottom rail yardage: 5.0 yds. leather: 80.0 sq. ft. 124

125 lounge mills 17π" 27Ω" 73 "* 33 "* 29 "* 9.5 yds ' 161 lbs '/1 6485LTB, LTS, LTW 451 mm 695 mm 1857 mm* 845 mm* 749 mm* 8.7 m 14.9 sqm 73.2 kg 2.84 cu RTB, RTS, RTW 6485LTB Tablet Arm, Left Facing - Brown 6485RTB Tablet Arm, Right Facing - Brown 6485LTS Tablet Arm, Left Facing - Sand 6485RTS Tablet Arm, Right Facing - Sand 6485LTW Tablet Arm, Left Facing - White 6485RTW Tablet Arm, Right Facing - White Loveseat with Tablet Arm. Oval tablet 15"w, 11"d. 360 rotation around center of arm. Available in Brown, Sand and White powdercoat finish. Tablet is designed for light weight use and is not recommended for high use areas. *Dimensions include tablet arm in user position. Walnut base with a bronze metal ring on legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. Please specify the application by designating the appropriate letter on the purchase order. A) One fabric or leather for seat cushion, inside back cushion and inside arm yardage: 4.5 yds. leather: 80.0 sq. ft. B) One fabric or leather for outer shell: back, sides, top and front rim, front bottom rail yardage: 5.0 yds. leather: 80.0 sq. ft. mills π" 27Ω" 92" 30 " 27Ω" 12.6 yds ' 204 lbs '/1 451 mm 695 mm 2337 mm 775 mm 695 mm 11.5 m 19.0 sqm 92.0 kg 2.9 cu Walnut base with a bronze metal ring on legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. Please specify the application by designating the appropriate letter on the purchase order. A) One fabric or leather for seat cushion, inside back cushion and inside arm yardage: 6.3 yds. leather: sq. ft. B) One fabric or leather for outer shell: back, sides, top and front rim, front bottom rail yardage: 6.3 yds. leather: sq. ft. mills 17π" 27Ω" 93 "* 33 "* 29 "* 12.6 yds ' 204 lbs '/1 6487LTB, LTS, LTW 451 mm 695 mm 2365 mm* 845 mm* 749 mm* 11.5 m 19.0 sqm 92 kg 2.9 cu RTB, RTS, RTW 6487LTB Tablet Arm, Left Facing - Brown 6487RTB Tablet Arm, Right Facing - Brown 6487LTS Tablet Arm, Left Facing - Sand 6487RTS Tablet Arm, Right Facing - Sand 6487LTW Tablet Arm, Left Facing - White 6487RTW Tablet Arm, Right Facing - White Sofa with Tablet Arm. Oval tablet 15"w, 11"d. 360 rotation around center of arm. Available in Brown, Sand and White powdercoat finish. Tablet is designed for light weight use and is not recommended for high use areas. *Dimensions include tablet arm in user position. Walnut base with a bronze metal ring on legs. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. Fully upholstered. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. Please specify the application by designating the appropriate letter on the purchase order. A) One fabric or leather for seat cushion, inside back cushion and inside arm yardage: 6.3 yds. leather: sq. ft. B) One fabric or leather for outer shell: back, sides, top and front rim, front bottom rail yardage: 6.3 yds. leather: sq. ft. 125

126 lounge -- modular Mirador Seating System Specification Guide Mirador is a modular seating product comprised of 63 unique modules, which may be used interchangeably to create an unlimited number of configurations. To select the modules that are appropriate for your application use the four steps listed below. Please visit Bernhardtdesign.com for a complete library of 2D and 3D models. You may also contact your local sales representative or the Bernhardt Design corporate office for specification assistance. Mirador is fully upholstered with a polished cast aluminum frame with levelers and non-marring glides. All necessary ganging brackets are included and pre-installed. GREENGUARD and level l certified. Four Step Selection Process Step 1 - Front Selection Sofa and Settee modules are available with two different front conditions. A - Flared Fronts 34 '' 31 '' 31 '' 8021AR 34 '' 8010AL B - Non-Flared Fronts 31 '' 31 '' 8016AL 31 '' 8027AR 31 '' Step 2 - Arm Selection Sofa and Settee modules are available with arms or without arms. A - Arm Module 9'' 9'' 8016AL 8018AL 96'' 66'' B - Armless Module 9'' 9'' 8026AL 8028AL 96'' 66'' 126

127 lounge -- modular Mirador Seating System Specification Guide Step 3 - End Selection Sofa and Settee modules are available with three unique end conditions. The selection of an end condition is used to achieve different angles when connecting multiple modules. A - Straight Ends are specified for creating a configuration in a straight line 180º. 8016AL 8017AR 180º B - Open Angle Ends are specified for opening up a configuration and achieving an angle which is greater than180º. 15º 8016BL 8017B Open Angle modules are wider in the front and narrower at the back. 210º C - Closed Angle Ends are specified for closing up a configuration and achieving an angle which is less than180º. 15º Closed Angle modules are narrower in the front and wider at the back. 8016CL 150º 8017CR Modules with different end conditions may be connected to achieve the appropriate angle. 8016AL 8029AR 8016AL 8029BR 8016AL 8029CR Straight / Straight Straight / Open Straight / Closed 8016CL 8031A 8016AL 8031CL 8029BR 8029BR Closed / Straight / Open Straight / Closed / Open 8031C 8016BL 8029AR 8016CL 8031B 8029AR Closed / Closed / Straight Open / Open / Straight 127

128 lounge -- modular Mirador Seating System Specification Guide Step 4 - Connecting Module Selection A - Specifying connecting modules to achieve a desired length. 8032A 8031A 8030A 30'' 60'' 90'' B - Specifying connection modules to achieve a desired angle C 8031B 8033A 8034A 8034A 8034A 8031A 8034A 8035A 8034A 8031A 8034A Twelve unique connecting modules are available to alter both the length and the angle of a configuration. Straight Connecting Modules 8030A 8031A 8032A 8035A Open Angle Connecting Modules 8030B 8031B 8032B 8034A Closed Angle Connecting Modules 8030C 8031C 8032C 8033A 128

129 lounge -- modular Mirador Seating System Sample Configurations 1 31π'' Description (1) 8028AL Left Armless (1) 8029AR Right Armless 132'' 2 34 '' (1) 8010AL Left Arm (1) 8011AR Right Arm 192'' 3 (1) 8012CL Left Arm (1) 8021CR Right Armless 76 '' 145π'' 4 (1) 8026BL Left Armless (1) 8033A Inside Quarter Round (1) 8027BR Right Armless 87 '' 234π'' 5 (1) 8016BL Left Arm (1) 8031B Connecting Module (1) 8017BR Right Arm 74π'' π'' 129

130 lounge -- modular Description 6 (1) 8010CL Left Arm (1) 8033A Inside Quarter Round (1) 8023CR Right Armless 114π'' 151 '' 7 (1) 8016AL Left Arm (1) 8035A Corner (1) 8017AR Right Arm 132'' 134'' 8 (4) 8034A Outside Quarter Round (2) 8031A Connecting Module 105 '' 163π'' 9 (1) 8011AR Right Arm (2) 8033A Inside Quarter Round (2) 8032A Connecting One-Seat (1) 8031A Connecting Two-Seat (1) 8030A Connecting Three-Seat (2) 8034A Outside Quarter Round (1) 8012AL Left Arm 255'' 244π'' 130

131 lounge -- modular 8012AL 8010AL 8022AL 8020AL Mirador Seating System Product Overview 8010BL 8012BL 8022BL 8020BL Flared Front Sofa and Settee 8012CL 8010AL 8012AL 8010BL 8012BL 8013AR 8022CL 8020CL 8020AL 8022AL 8010CL 8011AR 8010CL 8011BR 8020BL 8012CL 8022BL 8021AR 8020CL 8023AR 8022CL 8023BR 8013BR 8021BR 8011AR 8013AR 8013BR 8021CR 8021AR 8023CR 8023AR 8011CR 8011BR 8013BR 8021BR 8023BR 8011CR 8013CR 8021CR 8023CR Non-Flared Front Sofa and Settee 8016AL 8018AL 8026AL 8028AL 8016BL 8018BL 8026BL 8028BL 8016CL 8018CL 8026CL 8028CL 8017AR 8019AR 8027AR 8029AR 8027BR 8029BR 8027CR 8029CR 8017BR 8019BR 8017CR 8019CR Connecting Module 8030A 8031A 8032A 8030B 8031B 8032B 8030C 8031C 8032C 8041A 8040A 8035A 8034A 8033A Freestanding Bench 8042A 131

132 lounge -- modular 34 '' 31 '' flared front sofa - arm mirador 8010AL 16 " 21-29" 96" " 29" yds ' 221 lbs /1 419 mm mm 2438 mm mm 737 mm 10.3 m 14.9 sqm kg 2.88 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8010BL 16 " 21-29" 96" " 29" yds ' 224 lbs /1 419 mm mm 2438 mm mm 737 mm 10.3 m 14.9 sqm kg 2.78 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8010CL 16 " 21-29" 96" " 29" yds ' 221 lbs /1 419 mm mm 2438 mm mm 737 mm 10.3 m 14.9 sqm kg 2.88 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8011AR 16 " 21-29" 96" " 29" yds ' 221 lbs /1 419 mm mm 2438 mm mm 737 mm 10.3 m 14.9 sqm kg 2.88 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8011BR 16 " 21-29" 96" " 29" yds ' 224 lbs /1 419 mm mm 2438 mm mm 737 mm 10.3 m 14.9 sqm kg 2.77 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8011CR 16 " 21-29"' 96" " 29" yds ' 221 lbs /1 419 mm mm 2438 mm mm 737 mm 10.3 m 14.9 sqm kg 2.88 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 132

133 lounge -- modular flared front settee - arm 34 '' 31 '' mirador 8012AL 16 " 21-29" 66" " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8012BL 16 " 21-29" 66" " 29" 8.5 yds ' 155 lbs '/1 419 mm mm 1676 mm mm 737 mm 7.8 m 13.4 sqm 70.5 kg 2.84 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8012CL 16 " 21-29"' 66" " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8013AR 16 " 21-29"' 66" " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8013BR 16 " 21-29" 66" " 29" 8.5 yds ' 155 lbs '/1 419 mm mm 1676 mm mm 737 mm 7.8 m 13.4 sqm 70.5 kg 2.84 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8013CR 16 " 21-29" 66" " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 133

134 lounge -- modular flared front sofa - armless 34 '' 31 '' mirador 8020AL 16 " - 96" " 29" yds ' 200 lbs /1 419 mm mm mm 737 mm 9.4 m 14.0 sqm 90.9 kg 2.87 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8020BL 16 " - 96" " 29" yds ' 205 lbs /1 419 mm mm mm 737 mm 9.4 m 14.0 sqm 93.2 kg 2.77 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8020CL 16 " - 96" " 29" yds ' 200 lbs /1 419 mm mm mm 737 mm 9.4 m 14.0 sqm 90.9 kg 2.87 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8021AR 16 " - 96" " 29" yds ' 200 lbs /1 419 mm mm mm 737 mm 9.4 m 14.0 sqm 90.9 kg 2.87 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8021BR 16 " - 96" " 29" yds ' 205 lbs /1 419 mm mm mm 737 mm 9.4 m 14.0 sqm 93.2 kg 2.77 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8021CR 16 " - 96" " 29" yds ' 200 lbs /1 419 mm mm mm 737 mm 9.4 m 14.0 sqm 90.9 kg 2.87 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 134

135 lounge -- modular flared front settee - armless 34 '' 31 '' mirador 8022AL 16 " - 66" " 29" 7.5 yds ' 142 lbs /1 419 mm mm mm 737 mm 6.9 m 9.3 sqm 64.5 kg 1.93 cu ` Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8022BL 16 " - 66" " 29" 7.5 yds ' 147 lbs '/1 419 mm mm mm 737 mm 6.9 m 9.3 sqm 66.8 kg 2.84 cu ` Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8022CL 16 " - 66" " 29" 7.5 yds ' 142 lbs /1 419 mm mm mm 737 mm 6.9 m 9.3 sqm 64.5 kg 1.93 cu ` Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8023AR 16 " - 66" " 29" 7.5 yds ' 142 lbs /1 419 mm mm mm 737 mm 6.9 m 9.3 sqm 64.5 kg 1.93 cu ` Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8023BR 16 " - 66" " 29" 7.5 yds ' 147 lbs '/1 419 mm mm mm 737 mm 6.9 m 9.3 sqm 66.8 kg 2.84 cu ` Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8023CR 16 " - 66" " 29" 7.5 yds ' 142 lbs /1 419 mm mm mm 737 mm 6.9 m 9.3 sqm 64.5 kg 1.93 cu ` Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 135

136 lounge -- modular non-flared front sofa - arm 31 '' 31 '' mirador 8016AL 16 " 21-29" 96" 31 " 29" yds ' 220 lbs /1 419 mm mm 2438 mm 794 mm 737 mm 10.3 m 14.9 sqm kg 2.87 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8016BL 16 " 21-29" 96" 31 " 29" yds ' 225 lbs '/1 419 mm mm 2438 mm 794 mm 737 mm 10.3 m 14.9 sqm kg 2.77 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8016CL 16 " 21-29" 96" 31 " 29" yds ' 220 lbs /1 419 mm mm 2438 mm 794 mm 737 mm 10.3 m 14.9 sqm kg 2.87 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8017AR 16 " 21-29" 96" 31 " 29" yds ' 220 lbs /1 419 mm mm 2438 mm 794 mm 737 mm 10.3 m 14.9 sqm kg 2.87 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8017BR 16 " 21-29" 96" 31 " 29" yds ' 225 lbs '/1 419 mm mm 2438 mm 794 mm 737 mm 10.3 m 14.9 sqm kg 2.77 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8017CR 16 " 21-29" 96" 31 " 29" yds ' 220 lbs /1 419 mm mm 2438 mm 794 mm 737 mm 10.3 m 14.9 sqm kg 2.87 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 136

137 lounge -- modular non-flared front settee - arm 31 '' 31 '' mirador 8018AL 16 " 21-29" 66" 31 " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm 833 mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8018BL 16 " 21-29" 66" 31 " 29" 8.5 yds ' 157 lbs /1 419 mm mm 1676 mm 794 mm 737 mm 7.8 m 13.4 sqm 71.4 kg 2.84 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8018CL 16 " 21-29" 66" 31 " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm 794 mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8019AR 16 " 21-29" 66" 31 " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm 794 mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8019BR 16 " 21-29" 66" 31 " 29" 8.5 yds ' 157 lbs /1 419 mm mm 1676 mm 794 mm 737 mm 7.8 m 13.4 sqm 71.4 kg 2.84 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8019CR 16 " 21-29" 66" 31 " 29" 8.5 yds ' 152 lbs /1 419 mm mm 1676 mm 794 mm 737 mm 7.8 m 13.4 sqm 69.1 kg 1.93 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 137

138 lounge -- modular non-flared front sofa - armless 31 '' 31 '' mirador 8026AL 16 " - 96" 31 " 29" yds ' 201 lbs /1 419 mm mm 794 mm 737 mm 9.4 m 14.0 sqm 91.4 kg 2.87 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8026BL 16 " - 96" 31 " 29" yds ' 206 lbs /1 419 mm mm 794 mm 737 mm 9.4 m 14.0 sqm 93.6 kg 2.77 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8026CL 16 " - 96" 31 " 29" yds ' 201 lbs /1 419 mm mm 794 mm 737 mm 9.4 m 14.0 sqm 91.4 kg 2.87 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8027AR 16 " - 96" 31 " 29" yds ' 201 lbs /1 419 mm mm 794 mm 737 mm 9.4 m 14.0 sqm 91.4 kg 2.87 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8027BR 16 " - 96" 31 " 29" yds ' 206 lbs /1 419 mm mm 794 mm 737 mm 9.4 m 14.0 sqm 93.6 kg 2.77 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8027CR 16 " - 96" 31 " 29" yds ' 201 lbs /1 419 mm mm 794 mm 737 mm 9.4 m 14.0 sqm 91.4 kg 2.87 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 138

139 lounge -- modular non-flared front settee - armless 31 '' 31 '' mirador 8028AL 16 " - 66" 31 " 29" 7.5 yds ' 146 lbs /1 419 mm mm 794 mm 737 mm 6.9 m 9.3 sqm 66.4 kg 1.93 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8028BL 16 " - 73" 31 " 29" 7.5 yds ' 151 lbs '/1 419 mm mm 794 mm 737 mm 6.9 m 9.3 sqm 68.6 kg 2.84 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8028CL 16 " - 66" 31 " 29" 7.5 yds ' 146 lbs /1 419 mm mm 794 mm 737 mm 6.9 m 9.3 sqm 66.4 kg 1.93 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8029AR 16 " - 66" 31 " 29" 7.5 yds ' 146 lbs /1 419 mm mm 794 mm 737 mm 6.9 m 9.3 sqm 66.4 kg 1.93 cu Straight End. Approved for GSA. Contract GS-28F-7040G. mirador 8029BR 16 " - 73" 31 " 29" 7.5 yds ' 151 lbs '/1 419 mm mm 794 mm 737 mm 6.9 m 9.3 sqm 68.6 kg 2.84 cu Open Angle End. Approved for GSA. Contract GS-28F-7040G. mirador 8029CR 16 " - 66" 31 " 29" 7.5 yds ' 146 lbs /1 419 mm mm 794 mm 737 mm 6.9 m 9.3 sqm 66.4 kg 1.93 cu Closed Angle End. Approved for GSA. Contract GS-28F-7040G. 139

140 lounge -- modular connecting module mirador 8030A 16 " - 90" 31 " 29" 11.0 yds ' 210 lbs /1 419 mm mm 794 mm 737 mm 10.0 m 14.9 sqm 95.5 kg 2.87 cu Straight Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8030B 16 " - 103" 31 " 29" 11.0 yds ' 220 lbs /1 419 mm mm 794 mm 737 mm 10.0 m 14.9 sqm kg 2.77 cu Open Angle Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8030C 16 " - 90" 31 " 29" 11.0 yds ' 200 lbs /1 419 mm mm 794 mm 737mm 10.0 m 14.9 sqm 90.9 kg 2.87 cu Closed Angle Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8031A 16 " - 60" 31 " 29" 7.75 yds ' 139 lbs /1 419 mm mm 794 mm 737 mm 7.9 m 10.0 sqm 63.2 kg 1.93 cu Straight Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8031B 16 " - 74" 31 " 29" 7.75 yds ' 149 lbs '/1 419 mm mm 794 mm 737 mm 7.9 m 10.0 sqm 67.7 kg 2.84 cu Open Angle Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8031C 16 " - 60" 31 " 29" 7.75 yds ' 129 lbs /1 419 mm mm 794 mm 737 mm 7.9 m 10.0 sqm 58.6 kg 1.93 cu Closed Angle Ends. Approved for GSA. Contract GS-28F-7040G. 140

141 lounge -- modular connecting module mirador 8032A 16 " - 30" 31 " 29" 4.0 yds. 50.0' 68 lbs /1 419 mm mm 813 mm 737 mm 3.7 m 4.6 sqm 30.9 kg 1.0 cu Straight Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8032B 16 " - 44" 31 " 29" 4.0 yds. 50.0' 71 lbs /1 419 mm mm 787 mm 737 mm 3.7 m 4.6 sqm 32.2 kg 1.93 cu Open Angle Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8032C 16 " - 30" 31 " 29" 4.0 yds. 50.0' 58 lbs /1 419 mm mm 794 mm 737 mm 3.7 m 4.6 sqm 26.4 kg.64 cu Closed Angle Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8033A 16 " - 77" 31 " 29" 8.5 yds ' 153 lbs '/1 419 mm mm 794 mm 737 mm 7.8 m 11.2 sqm 69.5 kg 2.84 cu Closed Angle Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8034A 16 " - 73" 31 " 29" 6.3 yds. 80.0' 135 lbs '/1 419 mm mm 794 mm 737 mm 5.8 m 7.4 sqm 61.4 kg 2.84 cu Open Angle Ends. Approved for GSA. Contract GS-28F-7040G. mirador 8035A 16 " - 38" 38" 29" 4.0 yds. 60.0' 81 lbs /1 419 mm mm 965 mm 737 mm 3.7 m 5.6 sqm 36.8 kg.91 cu Straight. Approved for GSA. Contract GS-28F-7040G. 141

142 lounge -- modular freestanding bench mirador 8040A 16 " - 30" 28π" 16 " 3.0 yds. 40.0' 55 lbs /1 419 mm mm 730 mm 419 mm 2.7 m 3.7 sqm 25.0 kg.64 cu Single Seat Bench. Approved for GSA. Contract GS-28F-7040G. mirador 8041A 16 " - 60" 28π" 16 " 5.5 yds. 75.0' 122 lbs /1 419 mm mm 730 mm 419 mm 5.0 m 7.0 sqm 55.5 kg 1.93 cu Two Seat Bench. Approved for GSA. Contract GS-28F-7040G. mirador 8042A 16 " - 90" 28π" 16 " 7.5 yds ' 181 lbs /1 419 mm mm 730 mm 419 mm 6.9 m 9.4 sqm 82.3 kg 2.87 cu Three Seat Bench. Approved for GSA. Contract GS-28F-7040G. pillow mirador " 4" 15" 1.0 yds. 15.0' 4 lbs. 4.0/ mm 102 mm 381 mm.9 m 1.4 sqm 1.8 kg.11 cu '' x 15'' Square Pillow. 142

143 lounge mitt " - 33 " 33 " 32" 4.5 yds. 57.0' 64 lbs '/1 419 mm mm 851 mm 813 mm 4.1 m 5.3 sqm 29.0 kg 1.0 cu Standard Stitch with Handle. Mobile chair with four weight-activated self-locking casters. *All COM/COL fabrics must be preapproved for chair and handle by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Handle Specification: Standard Handle: Handle is the same fabric or leather as the chair. Yardage for the handle is included in yardage requirements. Contrasting Handle: Handle is a different fabric or leather than the chair. For contrasting handle, the following yardage must be used and upcharges apply. A) One fabric or leather for chair yardage: 4.5 yds. leather: 57 sq. ft. C) One fabric or leather for 1-5 handles yardage: 1.0 yds. leather: 20 sq. ft. mitt 5720L 16 " - 33 " 33 " 32" 4.5 yds. 57.0' 64 lbs '/1 419 mm - 851mm 851 mm 813 mm 4.1 m 5.3 sqm 29.0 kg 1.0 cu Loop Master Stitch with Handle. Mobile chair with four weight-activated self-locking casters. *All COM/COL fabrics must be preapproved for chair and handle by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Loop Master Stitch Specification: Thread color must be specified. Reference Mitt/Stitching on Bernhardtdesign.com for color options. The same thread color will be used for the chair and handle. Handle Specification: Standard Handle: Handle is the same fabric or leather as the chair. Yardage for the handle is included in yardage requirements. Contrasting Handle: Handle is a different fabric or leather than the chair. For contrasting handle, the following yardage must be used and upcharges apply. A) One fabric or leather for chair yardage: 4.5 yds. leather: 57 sq. ft. C) One fabric or leather for 1-5 handles yardage: 1.0 yds. leather: 20 sq. ft. mitt " - 33 " 33 " 32" 4.5 yds. 57.0' 64 lbs '/1 419 mm mm 851 mm 813 mm 4.1 m 5.3 sqm 29.0 kg 1.0 cu Standard Stitch - No Handle. Mobile chair with four weight-activated self-locking casters. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. mitt 5721L 16 " - 33 " 33 " 32" 4.5 yds. 57.0' 64 lbs '/1 419 mm mm 851 mm 813 mm 4.1 m 5.3 sqm 29.0 kg 1.0 cu Loop Master Stitch - No Handle. Mobile chair with four weight-activated self-locking casters. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. Loop Master Stitch Specifications: Thread color must be specified. Reference Mitt/Stitching on Bernhardtdesign.com for color options. 143

144 lounge miura " 21 " 37" 34 " 27 " 7.0 yds ' 75 lbs '/1 432 mm 546 mm 940 mm 886 mm 692 mm 6.4 m 13.5 sqm 34.0 kg.91 cu Fully upholstered. Polished stainless steel loop base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and inback yardage: 3 yds. leather: 60 sq. ft. B) One fabric or leather for arms, outside back and front panel yardage: 5 yds. leather: 105 sq. ft. miura " 21 " 69 " 34 " 27 " 11.0 yds ' 125 lbs '/1 432 mm 546 mm 1759 mm 886 mm 692 mm 10.0 m 23.2 sqm 56.7 kg 2.28 cu Fully upholstered. Polished stainless steel loop base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and inback yardage: 6 yds. leather: 120 sq. ft. B) One fabric or leather for arms, outside back and front panel yardage: 6 yds. leather: 135 sq. ft. miura " 21 " 95 " 34 " 27 " 15.0 yds ' 205 bs '/1 432 mm 546 mm 2426 mm 886 mm 692 mm 13.7 m 32.5 sqm kg 2.77 cu Fully upholstered. Polished stainless steel loop base. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and inback yardage: 8 yds. leather: 175 sq. ft. B) One fabric or leather for arms, outside back and front panel yardage: 7 yds. leather: 150 sq. ft. 144

145 lounge moreau " 26π" 31 " 28 " 30" 6.5 yds ' 57 lbs '/RP 483 mm 679 mm 800 mm 724 mm 762 mm 5.9 m 10.9 sqm 25.8 kg.59 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for inside seat cushion and back cushion yardage: 2.2 yds. leather: 45.9 sq. ft. B) One fabric or leather for outside arms, inside arms, outside back, inside back, front panel and welt yardage: 4.6 yds. leather: 75.7 sq.ft. moreau 7022A 19" 26π" 31 " 28 " 30" 6.5 yds ' 57 lbs '/RP 483 mm 679 mm 800 mm 724 mm 762 mm 5.9 m 10.9 sqm 25.8 kg.59 cu Fully upholstered. Quilted seat and back cushion. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 2.2 yds. leather: 45.9 sq. ft. B) One fabric or leather for outside arms, inside arms, outside back, inside back, front panel and welt yardage: 4.6 yds. leather: 75.7 sq. ft. Please specify the fabric or leather application by designating the appropriate letter on the purchase order moreau " 26π" 59" 28 " 30" 10.5 yds ' 85 lbs '/RP 483 mm 679 mm 1499 mm 724 mm 762 mm 9.6 m 15.4 sqm 38.5 kg 1.16 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 4.2 yds. leather: 90.8 sq. ft. B) One fabric or leather for outside arms, inside arms, outside back, inside back, front panel and welt yardage: 6.3 yds. leather: sq. ft. 145

146 lounge moreau 7025A 19" 26π" 59" 28 " 30" 10.5 yds ' 85 lbs '/RP 483 mm 679 mm 1499 mm 724 mm 762 mm 9.6 m 15.4 sqm 38.5 kg 1.16 cu Fully upholstered. Quilted seat and back cushion. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt..*all COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 4.2 yds. leather: 90.8 sq. ft. B) One fabric or leather for outside arms, inside arms, outside back, inside back, front panel and welt yardage: 6.3 yds. leather: sq. ft. moreau " 26π" 76 " 28 " 29 " 12.5 yds ' 100 lbs '/RP 483 mm 679 mm 1943 mm 724 mm 749 mm 11.4 m 22.4 sqm 45.4 kg 1.48 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 5.9 yds. leather: sq. ft. B) One fabric or leather for outside arms, inside arms, outside back, inside back, front panel and welt yardage: 6.6 yds. leather: sq. ft. moreau 7027A 19" 26π" 76 " 28 " 29 " 12.5 yds ' 100 lbs '/RP 483 mm 679 mm 1943 mm 724 mm 749 mm 11.4 m 22.4 sqm 45.4 kg 1.48 cu Fully upholstered. Quilted seat and back cushion. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. Standard with welt. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for inside seat cushion and back cushion only yardage: 5.9 yds. leather: sq. ft. B) One fabric or leather for outside arms, inside arms, outside back, inside back, front panel and welt yardage: 6.6 yds. leather: sq. ft. 146

147 lounge orly " 24" 36 " 33 " 28" 6.0 yds ' 90 lbs '/1 419 mm 610 mm 927 mm 851 mm 711 mm 5.5 m 10.5 sqm 40.9 kg 1.0 cu Fully upholstered. Brushed nickel legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat, inside and outside arms, front and back panel yardage: 5.0 yds. leather: 90.0 sq. ft. B) One fabric or leather for back pillow yardage: 1.0 yds. leather: 23.0 sq. ft. orly " 24" 82 " 33 " 28" 10.5 yds ' 130 lbs '/1 419 mm 610 mm 2096 mm 851 mm 711 mm 9.6 m 15.7 sqm 58.9 kg 2.88 cu Fully upholstered. Brushed nickel legs. For seamless back and seat specify fabric railroaded. Leather will be seamed. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat, inside and outside arms, front and back panel yardage: 7.0 yds. leather: sq. ft. B) One fabric or leather for back pillow yardage: 3.5 yds. leather: 46.0 sq. ft. railroaded yardage: 3.0 yds. oslo " 24 " 28 " 28" 28π" 3.0 yds. 45.0' 34 lbs '/1 394 mm 616 mm 724 mm 711 mm 730 mm 2.7 m 4.2 sqm 15.5 kg.63 cu Back cushion attached with two buttons. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric and welt upcharges. A) One fabric or leather for seat body yardage: 2.0 yds. leather: 27.5 sq. ft. B) One fabric or leather back cushion yardage: 1.0 yds. leather: 17.5 sq. ft. C) One fabric or leather for 2 buttons yardage:.3 yds. leather:.5 sq. ft. 147

148 lounge oxford " 26" 33 " 32 " 29 " 7.5 yds ' 83 lbs '/RP 457 mm 660 mm 851 mm 826 mm 749 mm 6.9 m 12.6 sqm 37.7 kg.59 cu Fully upholstered. Polished stainless steel tubular legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. oxford " 26" 27" 28 " 29 " 5.5 yds ' 68 lbs '/RP 457 mm 660 mm 686 mm 724 mm 749 mm 5.1 m 10.2 sqm 30.8 kg.64 cu Fully upholstered. Polished stainless steel tubular legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. oxford " 26" 60" 32 " 29 " 13.0 yds ' 102 lbs '/RP 457 mm 660 mm 1524 mm 826 mm 749 mm 11.9 m 17.7 sqm 46.2 kg 1.20 cu Fully upholstered. Polished stainless steel tubular legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. oxford " 26" 85" 32 " 29 " 15.5 yds ' 139 lbs '/RP 457 mm 660 mm 2159 mm 826 mm 749 mm 14.2 m 24.3 sqm 63.0 kg 1.70 cu Fully upholstered. Polished stainless steel tubular legs. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. pierce " 21 " 32" " 5.9 yds ' 67 lbs '/1 432 mm 546 mm 813 mm 838 mm 749 mm 5.4 m 10.3 sqm 30.3 kg 1.0 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. 148

149 lounge pillar " 16-28" 38 " 34 " 28" 8.3 yds ' 110 lbs '/1 432 mm mm 978 mm 902 mm 711 mm 7.6 m 11.1 sqm 49.9 kg.91 cu Fully upholstered. Stationary. Four concealed legs. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS- 28F-7040G. pillar " 16-28" 38 " 34 " 28" 8.3 yds ' 110 lbs '/1 432 mm mm 978 mm 902 mm 711 mm 7.6 m 11.1 sqm 49.9 kg.91 cu Fully upholstered. Swivel. Self-return black powdercoated swivel base. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. portrait " 25" 30 " 30" 30 " 4.9 yds. 89.5' 80 lbs '/1 470 mm 635 mm 775 mm 762 mm 775 mm 4.5 m 8.3 sqm 36.3 kg 1.0 cu Fully upholstered with wood trim on back. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Standard with welt. Approved for GSA. Contract GS-28F-7040G. portrait " 25π" 63 " 30" 30 " 9.0 yds ' 120 lbs '/1 457 mm 654 mm 1613 mm 762 mm 775 mm 8.2 m 13.2 sqm 54.4 kg 1.93 cu Fully upholstered with wood trim on back. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 and 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Standard with welt. Approved for GSA. Contract GS-28F-7040G. remix 2402 *16-18" - 24π" 28" 27 " 2.5 yds. 30.0' 40 lbs '/ mm mm 711 mm 702 mm 2.3 m 2.8 sqm 18.2 kg.63 cu Upholstered seat and back. Walnut base. Available in 823, 839, 841, 860, 861, 866, 870 and LV8 finishes. When specifying light finishes 870 and LV8 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. *Range while rocking. Approved for GSA. Contract GS-28F-7040G. remy " 18" 33 " 29 " 29" 5.0 yds ' 70 lbs '/1 381 mm 457 mm 851 mm 749 mm 737 mm 4.6 m 9.3 sqm 34.0 kg 1.0 cu Fully upholstered. Self-return swivel lounge. Polished stainless steel base. Certain horizontal stripes, plaids or fabrics with very little stretch are not suitable for this product. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 149

150 lounge union " 22 " 33 " 36 " 28 " 9.0 yds ' 85 lbs '/1 406 mm 581 mm 851 mm 921 mm 718 mm 8.2 m 11.4 sqm 38.6 kg 1.0 cu Fully upholstered. Bolstered back. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. union " 22 " 33 " 36 " 28 " 8.5 yds ' 85 lbs '/1 406 mm 581 mm 851 mm 921 mm 718 mm 7.8 m 10.6 sqm 38.6 kg 1.0 cu Fully upholstered. Maple solids. Available in all finishes. When specifying light finishes 836, 837, 840, 850 or 870 the natural characteristics of the wood will be visible. See terms and conditions. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G ven " 24 " 26π" 26 " 31Ω" 7.0 yds ' 62 lbs '/1 457 mm 622 mm 679 mm 673 mm 797 mm 6.4 m 9.8 sqm 28.1 kg.63 cu Fully upholstered. Stationary. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and base yardage: 2.25 yds. leather: 40.0 sq. ft. B) One fabric or leather for inside back and arms, outer shell yardage: 3.75 yds. leather: 62.5 sq. ft. C) One fabric or leather for outer shell border yardage: 1.25 yds. leather: 20.0 sq. ft. ven " 24 " 26π" 26 " 31Ω" 7.0 yds ' 57 lbs '/1 457 mm 622 mm 679 mm 673 mm 797 mm 6.4 m 9.8 sqm 25.9 kg.63 cu Fully upholstered. Casters. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and base yardage: 2.25 yds. leather: 40.0 sq. ft. B) One fabric or leather for inside back and arms, outer shell yardage: 3.75 yds. leather: 62.5 sq. ft. C) One fabric or leather for outer shell border yardage: 1.25 yds. leather: 20.0 sq. ft. 150

151 lounge ven " 24 " 26π" 26 " 31Ω" 7.0 yds ' 72 lbs '/1 457 mm 622 mm 679 mm 673 mm 797 mm 6.4 m 9.8 sqm 32.7 kg.63 cu Fully upholstered. Swivel. Self-return. *All COM/COL fabrics must be preapproved by Bernhardt Design prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat and base yardage: 2.25 yds. leather: 40.0 sq. ft. B) One fabric or leather for inside back and arms, outer shell yardage: 3.75 yds. leather: 62.5 sq. ft. C) One fabric or leather for outer shell border yardage: 1.25 yds. leather: 20.0 sq. ft. vika " 33Ω" 34" 4.1 yds. 60.0' 73 lbs '/1 352 mm mm 848 mm 864 mm 3.7 m 5.6 sqm 33.1 kg 1.0 cu Fully upholstered. Self-return swivel. Polished stainless steel 4-star base. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for inner seat yardage: 2.25 yds. B) One fabric or leather for outer shell yardage: 2.25 yds. leather: 30.0 sq. ft. leather: 30.0 sq. ft. vika " 33Ω" 34" 2.25 yds. 30.0' 73 lbs '/1 352 mm mm 848 mm 864 mm 2.1 m 2.8 sqm 33.1 kg 1.0 cu Upholstered inner seat. Gloss white painted fiberglass outer shell. Self-return swivel. Polished stainless steel 4-star base. *All COM/COL must be preapproved prior to application. Approved for GSA. Contract GS-28F-7040G. 151

152 lounge workshop 16 " 25 " 74π" 30 " 29 " 8.7 yds ' 154 lbs '/1 419 mm 641 mm 1899 mm 768 mm 743 mm 7.9 m 11.3 sqm 70.3 kg 2.28 cu A 6111A 6110A Chaise, Right Arm Facing 6111A Chaise, Left Arm Facing Chaise. Brushed antique copper base. Upholstered seat. Fabric Railroaded. Two 21''w x 12''h back cushions with center button; one 20''w x 8 ''h arm cushion with center button; one 6''d x 19 ''l bolster. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. A) One fabric or leather for seat, back and arm yardage: 4.6 yds. leather: 77.6 sq. ft. B) One fabric or leather for back pillows yardage: 1.6 yds. leather: 27.0 sq. ft. C) One fabric or leather for arm pillow yardage:.75 yds. leather: 12.2 sq. ft. D) One fabric or leather for bolster yardage:.75 yds. leather: 12.7 sq. ft. workshop 16 " 25 " 74π" 30 " 29 " 8.7 yds ' 155 lbs '/1 419 mm 641 mm 1899 mm 768 mm 743 mm 7.9 m 11.3 sqm 70.3 kg 2.28 cu B Chaise, Right Arm Facing 6111B Chaise, Left Arm Facing 6110B Chaise. Brushed stainless steel base. Upholstered seat. Fabric Railroaded. Two 21''w x 12''h back cushions with center button; one 20''w x 8 ''h arm cushion with center button; one 6''d x 19 ''l bolster. When using a combination of fabrics or leathers, the following yardage must be used and upcharges apply. See terms and conditions for contrasting fabric upcharges. 6111B A) One fabric or leather for seat, back and arm yardage: 4.6 yds. leather: 77.6 sq. ft. B) One fabric or leather for back pillows yardage: 1.6 yds. leather: 27.0 sq. ft. C) One fabric or leather for arm pillow yardage:.75 yds. leather: 12.2 sq. ft. D) One fabric or leather for bolster yardage:.75 yds. leather: 12.7 sq. ft. 152

153 graded-in textiles group 1 snap 3440 urban 3448 group 2 cross stitch 3451 downtown 3447 flight 3479 live wire 3430 network 3473 uptown 3444 zoom 3438 group 3 chat 3472 flash 3436 halftone 3353 parkway 3414 splice 3452 Please reference Bernhardttextiles.com for specific information. 153

154 graded-in textiles group 4 flicker 3428 kaleidoscope 3478 nova 3477 rumor 3474 group 5 block 3423 dash 3402 envoy 3457 hero 3463 net 3432 seeing stars 3476 stitch 3426 time 3363 wing 3374 wing ll 3449 Please reference Bernhardttextiles.com for specific information. 154

155 graded-in textiles group 6 bark 3377 current 3429 groove 3419 interlaken 3338 mesh 3434 pinpoint 3450 sequence 3387 group 7 bern 3339 improv 3467 lustre 3393 metro 3445 plain I 3382 plain II 3383 prize 3462 quake 3417 script 3469 sprint 3437 stone 3375 Please reference Bernhardttextiles.com for specific information. 155

156 graded-in textiles group 8 ace 3456 circle 3379 cornwall 3344 croquet 3311 dani 3459 dialogue 3471 flex 3431 flip 3439 focus 3470 link 3435 maven 3453 pavement 3446 rapina 3326 scribble 3397 spin 3401 spree 3408 trophy 3461 verve 3396 zigzag 3400 Please reference Bernhardttextiles.com for specific information. 156

157 graded-in textiles group 9 coast 3441 hitch 3411 makoto 3460 merit 3458 mix 3433 warren 3343 group 10 maverick 3368 shuffle 3443 vignette 3468 Please reference Bernhardttextiles.com for specific information. 157

158 graded-in textiles group 11 cameo 3465 cue 3466 drift 3412 haven 3405 muse 3454 pinball 3347 posh 3392 savvy 3455 sheridan 3329 shimmer 3316 valencia 3295 wizard 3370 Please reference Bernhardttextiles.com for specific information. 158

159 leather / leather alternatives leather - available for COL purchase essential 3113 finesse 3100 fundamental 3105 rogue 3110 leather alternatives - available for COM purchase allude 3812 brisa 3802 image 3799 impression 3830 mighty 3814 radar 3813 Please reference Bernhardttextiles.com for specific information. 159