COMPRESSOR TECHNICAL DATA

Transcription

1 COMPRESSOR DEFINITION Designation VES D9C Nominal Voltage/Frequency 230 V 400 Hz Engineering Number A APPLICATION / LIMIT WORKING CONDITIONS 1 Type 2 Refrigerant 3 Nominal voltage and frequency 4 Application type 4.1 range 5 Motor type 6 Starting torque 7 Expantion device 8 Compressor cooling 8.1 LBP (32ºC Ambient ) 8.2 LBP (43ºC Ambient ) 8.3 HBP (32ºC Ambient ) 8.4 HBP (43ºC Ambient ) 9 Maximum condensing pressures/ 9.1 Operating (gauge) 9.2 Peak (gauge) Hermetic reciprocating compressor R600a 230 / 400 Low Back Pressure C to C BPM LST Low Starting Torque Capillary tube 10 Maximum winding 130 [ C ] B MECHANICAL DATA 1 Commercial designation 1/5 [hp] [ V / Hz ] (31 F to 14 F) [kgf/cm²] (109 psig) [kgf/cm²] (139 psig) 2 Displacement 9.04 [cm³] (0.552 cu.in) 2.1 Bore [mm] 2.2 Stroke [mm] 3 Lubricant charge 3.1 Lubricants approved 3.2 Lubricants type/viscosity 4 Weight (with oil charge) 5 Nitrogen charge C ELETRICAL DATA ALQUILB / ISO [ml] [kg] [kgf/cm²] (6.42 fl.oz.) (14.97 lb.) 1 Nominal Voltage/Frequency/Number of Phases 230 V 400 Hz 3 ~ (Three phase) 2 Starting device type 2.1 Starting device 5 Motor protection 6 Start winding resistance 7 Run winding resistance 8 LRA Locked rotor amperage (40/150 Hz) 9 FLA Full load amperage L/MBP (40/150 Hz) Inverter VES 2456 XX X X / / Approval boards certification CCC VDE INVERTER VES 2456X Operating voltage range 50 Hz 60 Hz 187 to 255 V 187 to 255 V 187 to 255 V 187 to 255 V / ºC ºF / ºC ºF 3 Start capacitor [µf(vac minimum)] 4 Run capacitor [µf(vac minimum)] at 25ºC (77ºF)] +/ 8% Measured according to UL 984 Measured according to UL FLA Full Load Amperage HBP (40/150 Hz) Measured according to UL 984 [W [W at 25ºC (77ºF)] +/ 8%

2 D PERFORMANCE CHECK POINT DATA LBP (Condensing C (13 F) LBP (Condensing C (13 F) LBP (Condensing C (13 F) LBP (Condensing C (13 F) LBP (Condensing C (13 F)

3 E PERFORMANCE CURVES (Condensing 35ºC (+95ºF) ) (Condensing 45ºC (+113ºF) ) (Condensing 55ºC (+131ºF) ) (Condensing 35ºC (+95ºF) )

4 E PERFORMANCE CURVES (Condensing 45ºC (+113ºF) ) (Condensing 55ºC (+131ºF) ) (Condensing 35ºC (+95ºF) ) (Condensing 45ºC (+113ºF) )

5 E PERFORMANCE CURVES (Condensing 55ºC (+131ºF) ) (Condensing 35ºC (+95ºF) ) (Condensing 45ºC (+113ºF) ) (Condensing 55ºC (+131ºF) )

6 E PERFORMANCE CURVES (Condensing 35ºC (+95ºF) ) (Condensing 45ºC (+113ºF) ) (Condensing 55ºC (+131ºF) )

7 F EXTERNAL CHARACTERISTICS 1 Base plate 2 Tray holder European Standard VES Yes 3 Connectors 3.1 SUCTION /+0.00 [mm] (0.240" "/+0.000") Material Copper Shape Slanted 45 up + 15 to Back 3.2 DISCHARGE /0.05 [mm] (0.193" "/0.002") Material Copper Shape Slanted 0 up + 24 to Back 3.3 PROCESS /0.08 [mm] (0.236" "/0.003") Material Shape 3.4 Oil cooler (Copper) Copper(OD) Slanted 47 up + 59 to Back No [mm] 3.5 Connector sealing Rubber Plugs