Chase Rectangular and Pentagonal Units

Transcription

1 Chase Rectangular and Pentagonal Units Model Numbers: VC Veterinary Chase Service and Parts Manual Rectangular Wood Panel and Sheet Metal Components not found in this manual will need to be ordered by cing Midmark Corporation at Pentagonal FOR USE BY MIDMARK TRAINED TECHNICIANS ONLY (4/8/5)

2 Midmark Corporation 202 [Revised: mo/dd/yr] ii

3 GENERAL INFORMATIOn access procedures Table of Contents General Info Section A Section B Symbols... iv Ordering Parts... iv Build Date Location... iv Specifications... v Cleaning and Service... vi Not Available TESTING & ADJUSTMENT Door Adjustment... B-2 Digity Linked Files Section E Section D Section C Rectangular... C-2 Pentagonal... C-3 Not Available Exploded views Rectangular & Pentagonal... E-2 Parts Order Form Comments Form Color Selector... (*) Indicates multiple pages due to model / serial number break(s). Midmark Corporation 202 [Revised: mo/dd/yr] iii

4 General Information Symbols warning Indicates a potentiy hazardous situation which could result in serious injury if not avoided. Caution Indicates a potentiy hazardous situation which may result in minor or moderate injury if not avoided. It may also be used to alert against unsafe practices Equipment Alert Indicates a potentiy hazardous situation which could result in equipment damage if not avoided. Note Used for special instructions or additional information. Sales Order: /24/204 Item Number: VC* 2345 Description: Room: Elavation: Ordering Parts The following information is required when ordering parts: Model Number & Build Date Part number for desired part (Refer to Section E: Exploded Views & Parts Lists) Non-warranty parts orders may be faxed to Midmark using the Parts Order Form. For warranty parts orders, c Midmark s Technical Service Department with the required information. Hours: 8:00 am to 5:00 p.m. EST (Monday thru Friday) Phone: -800-Midmark ( ) Build Date Location Build Date Label Sales Order: /24/204 Item Number: VC* 2345 Description: Room: Elavation: VA787i Midmark Corporation 202 [Revised: 2/27/4] iv

5 Specifications Weights and Dimensions Rectangular Pentagonal Width 27 3/4" (70.5 cm) 2 3/4" (8 cm) Depth 27 3/4" (70.5 cm) 2 3/4" (8 cm) Height 84" (23.4 cm) 84" (23.4 cm) Weight 385 lbs (74. kg) 30 lbs (40. kg) Shipping Dimensions: 9" x 3" x 3" (23. cm x 78.7 cm x 9.4 cm) 9" x 3" x 3" (23. cm x 78.7 cm x 9.4 cm) Shipping Weight: 470 lbs (23.2 kg) 395 (79.2 kg) Options: 8' Soffit Additional Weight 0 lbs (4.5 kg) lbs (2.7 kg) 9' Soffit Additional Weight 9 lbs (8. kg) 4 lbs (.4 kg) 0' Soffit Additional Weight 28 lbs (2.7 kg) 22 lbs (0 kg) Plumbing and Electrical Compartment Plumbing and Electrical Compartment Pentagonal Rectangular Rectangular Pentagonal VA80i Midmark Corporation 202 [Revised: 2/27/4] v

6 Cleaning and Service Interval Inspection / Service Description Weekly Date of Service: Location: Cleaning Wipe the painted and plastic surfaces with a clean, soft cloth, and mild cleaner. (Note: Periodic application of common furniture wax will ease cleaning and maintain the luster of the surfaces). Model Number: Serial Number: Service Technician: Notes: Midmark Corporation 202 [Revised: mo/dd/yr] vi

7 Section B Testing & Adjustments Door Adjustment...B-2 Midmark Corporation 202 [Revised: mo/dd/yr] B-

8 Component Testing & Adjustment Door Adjustment Horizontal Adjustment... A) Turn screw to move panel side to side. Hinge Plate Depth Adjustment... A) Turn screw to move panel forward / backward. Vertical Adjustment... A) Loosen screws on hinge plates. B) Move door up / down. C) Tighten screws on hinge plates. VA805i Midmark Corporation 202 [Revised: mo/dd/yr] B-2

9 Section C Access Procedures 800 Rectangular...C-2 VC Rectangular...C-3 80 Pentagonal...C-4 VC Pentagonal...C-5 Midmark Corporation 202 [Revised: mo/dd/yr] C-

10 Access Panels (800 Model Rectangular Chase) To remove access panels... A) Lower panels pull straight out. B) Top panels pull bottom of panels out, lift top up and out to release. C) Unscrew soffit (if applicable) and top cover to remove. Top Cover Soffit Top Panel Lower Panel 800 Midmark Corporation 202 [Revised: mo/dd/yr] C-2

11 Access Panels (VC Rectangular Models) Soffit Top Cover Top Panel To remove access panels... A) Lower panels pull straight out. B) Pull out the bottom of the top panel to free it from clips, then lift panel up and off to remove. C) If necessary: Unscrew and remove soffit. Unscrew top panel and remove bracket so you can bend top cover around utilities to remove completely. Lower Panel VC Rectangular Midmark Corporation 202 [Revised: 2/27/4] C-3

12 Access Panels (80 Model Pentagonal Chase) Soffit To remove access panels... A) Lower panel pull straight out. B) Top panel pull bottom of panels out, lift top up and out to release. C) Unscrew soffit (if applicable) and top cover to remove. Top Cover Top Panel Lower Panel 80 Midmark Corporation 202 [Revised: mo/dd/yr] C-4

13 Access Panels (VC Pentagonal Models) To remove access panels... A) Lower panel pulls straight out. B) Pull out the bottom of the top panel to free it from clips, then lift panel up and off to remove. C) If necessary: Unscrew and remove soffit. Unscrew and remove bracket and the desired half of the top cover. Top Cover Soffit Top Panel Lower Panel VC Pentagonal Midmark Corporation 202 [Revised: 2/27/204 C-5

14 Exploded Views & Pictorial Index...E-2 Parts Lists Section E XXX-XXXX-XX XXX-XXXX-XX XXX-XXXX-XX Wood Panel and Sheet Metal Components not found in this manual will need to be ordered by cing Midmark Corporation at Midmark Corporation 202 [Revised: 4/7/205] E-

15 Chase Rectangular Pentagonal Soffit & Top panels...e- Soffit & Top panels...e- Rectangular Panels...E-3 Rectangular Supports...E-4 Pentagonal Removable Panels...E-7 Pentagonal Fixed Panels...E-8 Pentagonal Supports...E-9 Rectangular Lower Supports...E-5 VA78i Fastener Kit...E-2 Pentagonal Lower Supports...E-0 800, 80 & VC * Indicates multiple pages due to a serial number break for the parts illustration. Midmark Corporation 202 [Revised: 2/27/4] E-2

16 xxx 9 a) xxx b) xxx 9 0 a) xxx b) xxx xxx Rectangular Panels a) xxx 3 b) xxx a) xxx 4 b) xxx Midmark Corporation [Revised: mo/dd/yr] E-3 VA78i Removable Upper Panel Assembly (includes items 2, 5 thru 8) 2 Removable Panel 3 Removable Lower Panel Assembly (includes items 4 thru ) a) w/o Cutout 2 b) w/ Cutout 4 a) Lower Panel w/o Cutout b) Lower Panel w/ Cutout 5 Screw (# x 5/8 ) 20 Connector, Panel 20 7 Hanger Bracket 2 8 Screw (#0 x 5/8 ) 40 Fixed Panel Assy, (includes items 0 thru 2) 9 a) Panel w/o Cutout 2 b) Panel w/ Cutout 0 a) Panel w/o Cutout b) Panel w/ Cutout Screw (# x ) 20 2 Connector, Panel Stud 20 2

17 VA933i Rectangular Panels Upper Removable Panel Midmark Corporation VC Rectangular [Revised: 4// E-4 2 Screw (# x 5/8 ) 20 3 Connector, Panel 20 4 a) Lower Removable Panel w/o Cutout b) Lower Removable Panel w/ Cutout 5 Hanger Bracket 2 Screw (#0 x 5/8 ) 40 7 a) Panel w/o Cutout b) Panel w/ Cutout 8 Screw (# x ) 20 9 Connector, Panel Stud 20

18 and VC Rectangular Midmark Corporation 202 [Revised: 4//205] E-5 VA782i Rectangular Supports Center Bracket Support 4 2 Light Mounting Bracket Support 2 3 X-ray Weldment 2 4 Light Mount Weldment 2 5 Light Mounting Bracket Support 2 Hex Washer Head Bolt, (/4-20 x /2 ) 4

19 Rectangular Lower Supports Midmark Corporation [Revised: 4//205] E- VA783i Support Bracket 2 2 Center Channel Bracket Support 2 3 Hex Washer Head Bolt (/4-20 x /2 ) 4 Hex Flange Head Bolt (/4-20 x /2 ) 5 W Floor Brace Support 2 Screw (#0-24 x 3/8 ) 4 7 Kick Plate Assembly 2 8 Screw (#0-24 x 5/8 ) 4 9 Hex Head Bolt (/4-20 x ) 4

20 Rectangular Lower Supports VC Rectangular 7 VA934 Support Bracket 2 2 Center Channel Bracket Support 2 3 Hex Washer Head Bolt (/4-20 x /2 ) 4 Hex Flange Head Bolt (/4-20 x /2 ) 5 W Floor Brace Support 2 Screw (#0-24 x 3/8 ) 4 7 Kick Plate (removable side) 2 8 Screw (#0-24 x 5/8 ) 4 9 Kick Plate (fixed side) 2 0 Hex Head Bolt (/4-20 x ) 4 Midmark Corporation 202 [Revised: 4//205] E-7

21 a) b) c) a) b) c) a) b) c) Rectangular Soffit and Top Panel Kits Soffit Kit (includes items 3 thru ) a) 8 Ceiling Height b) 9 Ceiling Height c) 0 Ceiling Height 2 Soffit Kit Cap Assembly (includes item 3) Midmark Corporation [Revised: mo/dd/yr] E-8 VA784i 3 Screw (#0-24 x 3/8 ) AR 4 Screw (#8-8 x 5/8 ) 8 5 Open Soffit Cap 2 Soffit Assembly (includes items 7 & 8) a) 20 Soffit (8 Ceiling Height) b) 32 Soffit (9 Ceiling Height) c) 44 Soffit (0 Ceiling Height) 7 a) 20 Soffit (8 Ceiling Height) b) 32 Soffit (9 Ceiling Height) c) 44 Soffit (0 Ceiling Height) 2 8 Painted Screw (#0-24 x 3/8 ) AR

22 5 a) b) c) d) VC Rectangular Soffit and Top Panel Kits 4 Midmark Corporation 202 VC Rectangular [Revised: 4/7/205] E-9 VA935i Soffit Kit (includes items 2-) (available for:) a) 8 Ceiling Height b) 9 Ceiling Height c) 0 Ceiling Height d) Ceiling Height e) 2 Ceiling Height 2 Angle Bracket 4 3 Soffit Cap (bendable) 4 Screw (#0-24 x 3/8 ) AR 5 Rectangular Soffit (available for:) a) 8 Ceiling Height b) 9 Ceiling Height c) 0 Ceiling Height d) Ceiling Height e) 2 Ceiling Height Painted Screw (#0-24 x 3/8 ) a) Pebble b) Frost AR c) Whisper d) Fawn 7 Screw (#8-8 x 5/8 ) 8 Soffit Kit Cap Assembly (includes item 4) 2

23 xxx xxx 7 a) xxx 8 b) xxx a) xxx 2 b) xxx VA797i Pentagonal Removable Panels Midmark Corporation [Revised: 4//205] E Top Removable Panel Assembly (includes items 3 thru 7) 2 Lower Panel Assembly (includes items thru 8) a) w/o Cutout b) w/ Cutout 3 Top Removable Panel 4 Hanger Bracket, Cabinet 5 Screw (#0 x 5/8 ) 4 Connector, Female Panel 0 7 Screw (# x 5/8 ) 0 Lower Panel 8 a) w/o Cutout b) w/ Cutout

24 VA938i VC Pentagonal Pentagonal Removable Panels Upper Removable Panel 2 Hanger Bracket 3 Screw (#0 x 5/8 ) 4 4 Connector, Female Panel 0 5 Screw (# x 5/8 ) 0 Lower Removable Panel a) w/o Cutout b) w/ Cutout Midmark Corporation 202 [Revised: 4//205] E-

25 a) xxx b) xxx 2 a) xxx b) xxx xxx Midmark Ritter 4 a) b) c) Woodgrain Midmark Corporation [Revised: 4//205] 5 a) xxx b) xxx c) xxx E-2 VA798i Pentagonal Fixed / Door Panels Fixed Panel a) w/o Cutout b) w/ Cutout 2 Fixed Panel a) w/o Cutout b) w/ Cutout 3 Screw (#0 x 5/8 ) 32 4 Door Assembly a) Midmark (includes items 5 thru 9) b) Woodgrain (includes items 5 thru 8) 2 c) Ritter (includes items 5 & 8) 5 Door Panel (specify color) a) Midmark b) Woodgrain (shown) c) Ritter 2 Bumper Door Hinge (includes screws) 8 8 Mounting Plate (includes screws) 8 9 Clear Cover 0 Color insert Ritter Handle Bag Assembly (includes screws)

26 xxx Pentagonal Fixed / Door Panels Midmark Corporation 202 VC Pentagonal 4 [Revised: 4//205] VA939i E-3 5 Fixed Panel (Left) a) w/o Cutout b) w/ Cutout 2 Fixed Panel (Right) a) w/o Cutout b) w/ Cutout 3 Screw (#0 x 5/8 ) 32 4 Door Panel 2 5 Bumper 8 0 Door Hinge (includes screws) 8 7 Mounting Plate (includes screws) 8 8 Clear Cover 9 Color insert 0 Flare Handle (includes screws #8-32 x 23mm) Bent Handle (includes screws #8-32 x 23mm) 2 Edge Handle (includes screws #8-32 x 23mm) 3 Arc Handle (includes screws #8-32 x 23mm) 4 Bent w/ Anti-microbial Handle (includes screws #8-32 x )

27 VA790i Pentagonal Supports 80 and VC Pentagonal Midmark Corporation 202 [Revised: 4//205] E-4 Support Angle Bracket 2 Light Mount Weldment 3 X-ray Weldment 4 Panel Connector 8 5 Screw (#-32 x 3/4 ) 8 Center Bracket Support 2 7 Light Mount Bracket Support 2 8 Hex Washer Head Bolt (/4-20 x /2 ) 44 9 VetPro Bracket Support 2

28 Pentagonal Lower Supports Midmark Corporation [Revised: 4//205] E-5 VA79i Hex Flange Head Bolt (/4-20 x /2 ) 4 2 LH Floor Brace Support Weldment 3 Screw (#-32 x 3/4 ) 2 4 Panel Connector 2 5 Support Angled Bracket Hex Head Bolt (/4-20 x ) 4 7 RH Floor Brace Support Weldment 8 Kick Plate Assembly 9 Screw (#0-24 x 5/8 ) 4 0 Screw (#0-24 x 3/8 ) 4 Base Center 2 Hex Washer Head Bolt (/4-20 x /2 ) 4

29 Midmark Corporation 202 a) b) VC Pentagonal [Revised: 4/7/205] E- VA940i VC Pentagonal Lower Supports LH Kick Plate 2 RH Kick Plate 3 Screw (#0-24 x 3/8 ) 4 4 Screw (#0-24 x 5/8 ) 4 5 Center Kick Plate RH Floor Brace Support Weldment 7 Support Angled Bracket 8 Screw (#-32 x 3/4 ) 2 9 Panel Connector 2 0 Hex Head Bolt (/4-20 x ) 4 LH Floor Brace Support Weldment 2 Hex Washer Head Bolt (/4-20 x /2 ) 4 3 Hex Flange Head Bolt (/4-20 x /2 ) 4

30 a) b) c) a) b) c) a) b) c) a) b) c) Pentagonal Soffit and Top Panel Kits Midmark Corporation 202 [Revised: 4/dd/yr] E-7 VA792i Soffit Kit (includes items 3 thru 7) a) 8 Ceiling Height b) 9 Ceiling Height c) 0 Ceiling Height 2 Soffit Kit Cap Assembly (includes item 3) 3 Screw (#0-24 x 3/8 ) AR 4 Screw (#8-8 x 5/8 ) AR 5 RH Open Soffit Cap LH Open Soffit Cap Soffit Assembly (includes items 8 thru 0) 7 a) 20 Soffit (8 Ceiling Height) b) 32 Soffit (9 Ceiling Height) c) 44 Soffit (0 Ceiling Height) 8 a) 20 Soffit (8 Ceiling Height) b) 32 Soffit (9 Ceiling Height) c) 44 Soffit (0 Ceiling Height) 9 a) 20 Soffit (8 Ceiling Height) b) 32 Soffit (9 Ceiling Height) c) 44 Soffit (0 Ceiling Height 0 Painted Screw (#0-24 x 3/8 ) AR

31 a) b) c) c) VC Pentagonal Soffit and Top Panels 4 Soffit Kit (includes items 3-7) (Available for:) a) 8' Ceiling Height b) 9' Ceiling Height c) 0' Ceiling Height d) ' Ceiling Height e) 2' Ceiling Height 2 Screw (#8-8 x 5/8 ) AR 3 Angle Bracket 3 4 Screw (#0-24 x 3/8 ) AR 5 Soffit Cover (breaks into 2 pieces) Midmark Corporation 202 VC Pentagonal [Revised: 4/7/205] E-8 VA94i Front VC Pent Soffit (Available for:) a) Cover for 8 Ceiling b) Cover for 9 Ceiling c) Cover for 0 Ceiling d) Cover for Ceiling e) Cover for 2 Ceiling 7 Back VC Pent Soffit (Available for:) a) Cover for 8 Ceiling b) Cover for 9 Ceiling c) Cover for 0 Ceiling d) Cover for Ceiling e) Cover for 2 Ceiling 8 Painted Screw (#0-24 x 3/8 ) a) Pebble b) Frost AR c) Whisper d) Fawn 9 Soffit Kit Cap Assembly (includes item 4)

32 800, 80 & VC Fastener Kit Midmark Corporation 202 [Revised: 4//205 E-9 Includes items shown (Except Filler Panels)

33 Midmark Corporation 0 Vista Drive Versailles, OH USA SUBJECT TO CHANGE WITHOUT NOTICE